Law Enforcement Recorder User Manual

Transcription

1 Law Enforcement Recorder User Manual Dear customer, thank you very much for purchasing this product. Please read the manual carefully, and keeping it properly for later reference. In the future, product upgrading may cause discrepancy with this manual, in this case, please final subject to the actual products.

2 Preface Thank you for purchasing the law enforcement recorder, please read this manual carefully before using, at the same time, please properly retention the manual for later reference. Statement The final interpretation of this manual and the related content are owned by the company. Because we are committed to the continuous improvement of product quality, it maybe cause discrepancies of products with manual, in this case, please take actual product as standard. Safety information Before using this product, please read and understand the following safety measures. Do not try to open the product case, only authorized maintenance personnel can repair it. After long hours working, it is normally to see the temperature rising. Only use the accessories supplied by manufacturers.

3 Chapter 1 Component description 1 Chapter 2 Chapter 3 Chapter 4 CATALOGUE Basic operation Boot Video Record Photograph Audio Record Infrared night vision Playback Screen off Intercom microphone function G transmission terminal extension function Reset 6 Document management system(basic version) installation and usage Software overview Operating system Install driver Install File management system Instruction of Document management system 13 Charging management Battery charging 18 Chapter 5 Fault and solutions 19 Attachment 1 China RoHS ingredient list 20 Attachment 2 Packing lis t 21

4 Chapter1 Component Description Front View 1) Charge lamp 2) Left infrared light 3) Camera lens 4) Audio recording microphone 5) Screen off button 6) Playback button(confirm botton/play button) 7) Power button 8) Status indicator light 9) Right infrared light 10) Microphone button 11) HDMI output interface 12) USB data interface Back View 13) External GPS signal input interface 14) Video recording button 15) Loudspeaker 16) Audio recording button 17) LED screen 18) Reset button 19) Multifunction interface(charging /3G video output/interphone) 20) Photograph button 21) PTT 22) Back clip 22-1-

5 Chapter2 Basic Operation Chapter2 Basic Operation 2.1 Boot 2.4 Audio Record Press power button to power on the unit with beep sound, it enters preview In preview mode, press audio record key, unit starts to take audio with a mode automatically, the mode indicator light illumines green. beep sound. Press audio record key again, unit stops taking audio with 1 2 two beep sound. The audio record will be saved automatically in WAV format 1 Recording parameters then turn back to the preview mode. 2 Battery life 3 3 Photo parameters 4 1 Red indicates audio recording status 1 4 Remaining number of photograph 2 Recording length 5 5 GPS status icon 6 Remaining recording time 7 The current system time In audio recording status, the state indicator light is flashing in yellow, and a red dot is in log bright on the left top of 6 When the GPS search satellite successfully, the LCD screen. 7 the icon is green, otherwise it is gray Video Record After boot, the system automatically enter into preview mode, press video record key, unit starts to take video with audio after beep sound. The Status indicates light will turn to red and twinkle. Press Video record key again, it stop video recording after beep sound twice. All the videos will be saved automatically as MP4 format Recording status&orange indicates 2 Video length 1. During video recording, the Status indicator light will flash in red. 2. At the top of the LCD screen, it shows video status, video resolution, and battery level. 3. At the bottom of the LCD screen, upstream shows recording time, down stream shows the system current time. 2.3 Photograph After boot, the system automatically enter into preview mode, press Photograph key to take a photo with small crash sound. The photo will be saved automatically in JPG format. 2.5 Ir Night Vision In preview or video record mode, long press M key to enter IR mode, long press again to quit. In IR mode, when unit switches to playback or audio recording mode, the IR lights will shut down automatically. Suggest to open the IR mode when in low light condition. 2.6 Playback Select The Playback File In preview mode, press playback key select interface, press video record key key can select right folder which you would like to playback; press playback key again to enter video/photo/audio thumbnail playback mode, press video record key can select left play file; press photograph key to select play file in right. 1 Video playback 3 Audio playback 2 Photo playback to enter video/photo/audio folder can select left, press photograph

6 Chapter2 Basic Operation Chapter2 Basic Operation Video Files Playback In thumbnail playback mode, after selecting the video or audio file, press playback key to enter full screen playback mode, press playback key again to start playing the file. During playing the file, press playback key to pause, press playback key again to continue playing. During playing the file, press audio record key to get back to thumbnail mode. 1 Selected file number 2 Total number of files 3 Selected file information 4 Selected file 5 Non-selected files 1.During playing video file, press Video record key to rewind, press Photograph key to fast-forward. 2. Selected file information as follows: resolution, date and time Audio File Playback In audio thumbnail playback mode, after selecting audio file, press playback key to enter full screen display mode, press playback key again to start play file. When the audio file playing, press playback key can pause play, press playback key again can continue play, during playing process, press audio recording key can return to thumbnail mode. 1 Selected file number 2 Total number of files 3 Selected file information 4 Selected file 5 Non-selected files The selected file information as follows: Date and Time Photo File Playback In photo thumbnail playback mode, after selecting photo file, press playback key enter into full screen display, press video record key or photograph key to switch to last or next file. Press audio record key to get back to thumbnail playback mode. 1 Selected file number 2 Total number of files 3 Selected file information 4 Selected file 5 Non-selected files The selected file information as follows: resolution, date and time File Search In thumbnail playback mode, long press playback key date set search (as follow pic shows). Press video record key and photograph key to select date search item, press screen off key M and audio record key to set the time search range, press playback key to confirm search. The search result will show out if the files matching the time range. to enter screen of Exit The Playback Mode In full screen playback mode, press audio record key to get back to thumbnail playback mode, press audio record key again to get back to video/photo/audio folder's select interface, press audio record key third time to get back to the preview mode. 2.7 Screen Off Press screen off key M, LCD screen will shut down, system go into power-save mode. At this time, press any key can open the LCD, system exit power-save mode

7 Chapter2 Basic Operation Chapter3 Installation And Usage Of The Document Management System (basic Version) 2.8 Interphone Microphone Function 3.1 Software Overview Connect interphone cable's one end to the unit's interphone interface, the other end to interphone. Adjust the interphone, through operation the PTT to realize the talkback function, which use as a "shoulder microphone". 1. When connecting the cable, please connect the unit's end first, then connect the interphone's end. 2. Choose the correct interphone cable according to different interphone G Transmission Terminal Extension Function Connect to the 3G terminal specially designed for this camera, to realize the functions of real time transmission of audio and video communication, GPS location, and send text, etc Reset If need reset, please do as the following operation figure. This operation don't cause the data loss or file corruption. RESET The Document Management System of law enforcement recorder (hereinafter referred to as the Document Management System) with the features of high security, documents tamper-proof,etc. enables the user to change password set resolution, synchronize time, manage logs, upload important files, set police information, and so on. 3.2 Operating System Supported operating systems: Windows2000 SP4/Windows XP SP2/Windows Vista / Windows Install The Driver Install the driver before installing document management system, the installation method is as follows Run Driver Insert CD-ROM into the CD-ROM, open the CD and double-click Direct USB- Setup to install the driver

8 Chapter3 Installation And Usage Of The Document Management System (basic Version) Chapter3 Installation And Usage Of The Document Management System (basic Version) Description Of The License Agreement Read the license agreement instructions, click "I accept." Installation Path Select the installation path, and then click "Install." Installation Components Select the components to install, and then click "Next" Installation Completed The installation is completed, click "Close" to complete the installation

9 Chapter3 Installation And Usage Of The Document Management System (basic Version) Chapter3 Installation And Usage Of The Document Management System (basic Version) 3.4 Installation of Document Management System Installation In the CD auto run screen, click on the "32-bit Document Management System" or "64-bit Document Management System" button Document Management System Name Enter the name of the document management system, click "Next." Installation Guide Read the installation guide instructions, click "Next" Shortcuts After checking to create a shortcut on the desktop, click "Next." Installation Path Select the installation path, and click "Next."

10 Chapter3 Installation And Usage Of The Document Management System (basic Version) Chapter3 Installation And Usage Of The Document Management System (basic Version) Preparing To Install Click "Install. 3.5 Document Management System Instructions Connect the Law enforcement recorder to the PC via USB cable and run the document management system. Connections shown as follows Installation Completed Click "Finish" to complete the installation Log In Document Management System Enter the correct password in the login screen, you can enter removable disk or setting interface, the login screen is as follows

11 Chapter3 Installation And Usage Of The Document Management System (basic Version) Chapter3 Installation And Usage Of The Document Management System (basic Version) Movable Disk In the Movable Disk mode, you can access the internal data files of law enforcement recorder. In the login screen, click "Movable Disk" button to see a new removable disk in "My Computer", law enforcement recorder run into Movable Disk mode. After entering the Movable disk mode, user can not set for law enforcement recorder, if setting is needed, disconnect the USB, and reconnect Modify Password The password of the law enforcement recorder could be modified. In the settings interface, put in the password that you want to modify, then click " Modify Password" button to modify the password, setting interface is as follows Time Synchronization In the settings screen, click Time Synchronization " button, you can make the recorder and the computer time synchronized Setting for Police Number Administrator can set the user information to law enforcement recorder, and overlay the police number in captured video / picture files. In the setting interface, input the user number to the device number, and then click "OK" button, the device number setting successfully. The police number can only be numbers or letters within eight figures Set Recorder number You can set the number to law enforcement recorder, overlay the recorder number on the captured video / picture files. In the settings interface, input the number in the Device number, then click the "OK" button, set the device number successfully. The recorder number can only be eight numbers or letters within 8 figures Set Video Resolution User can set the video resolution of law enforcement recorder. In the resolution, select " ", " ", then click "OK and save." The password is less than six figures, only numbers or letters are allowed

12 Chapter3 Installation And Usage Of The Document Management System (basic Version) Chapter3 Installation And Usage Of The Document Management System (basic Version) Delete All Documents In the settings screen, click the "Delete All Files" button, confirmation of delete all shows up, select "OK" to proceed with the operation. Delete all the files successfully, the following message box will shown up. Once this operation is done, the file can not be restored Set Photo Resolution User can set photo resolution. of law enforcement recorder. In the "pixel settings" select "5M", "8M", "12M", click "OK and save." Set Other Parameter User can also set other parameters of the law enforcement recorder. Sectional recording time, auto power-off time, on / off screen can be set, select and click "OK" and save

13 Chapter4 Battery Charging Chapter5 Fault and solutions 4.1 Battery Charging Rechargeable battery built inside the Law enforcement recorder. Connect USB for charging when the battery is low. When connecting the Law enforcement recorder with power adapter or car charger via USB, the light turns into Red, and turns off when the charging finished. Phenomenon Possible reasons Solutions Can't Boot Up Incorrect Time/ Data No Display On The screen While The indicator Light Is On Low battery Incorrect time on the upper computer Enters into power saving mode Charge the battery with the power adapter Reset via Document Management System Press any functional key Unclear Photograph/ Video Dirty camera lens Cleaning the lens with flannelette Can Not Recognition from The Upper Computer Can't Charger The recorder Via Multi -functional Base USB cable insert in a wrong way wrongpassword Low Enforcement Recorder and the Multi-Function Base Connecting the law enforcement recorder with the base in a wrong way Plug the USB again Check the password and re-input Low Enforcement Recorder and the Multi-Function Base Make good connection 1. It's better to turn off the recorder when charging. 2. Get the battery charged in every three months, prevent it from losing effectiveness. Charging Time Long Loosen power plug power on and charging via USB cable Checking the plug and reconnect Turn off the law enforcement recorder, get it fully charged, then restart

14 Attachment 1 China Rohs Ingredient List Names and contents of poisonous and harmful substance of this product: Name of the component Housing POISONOUS AND HARMFUL SUBSTANCE Pb Hg Cd Cr PBB PBDE Attachment 2 Packing List Please carefully open the packaging of the law enforcement recorder, counting all the attachments according to the following table. You are advised to keep the box and packing materials. Number 1 2 Accessories Law Enforcement Recorder Usb Cable Quantity One Set One Piece Button coating 3 4 Power Adapter Clip One Set One Set Lcd screen 5 Certification One Cables 6 User Manual One Lens Electronic resistance Circuit board You can choose the following non-standard accessories to increase the function of the law enforcement recorder, matching accessories are as follows. Number 1 Accessories Car charger Function Get charged when go out on duty Battery 2 Cable for connecting Walkie- talkie Connect the recorder with the Walkie-talkie, using as shoulder talker : Represents the content of poisonous and harmful substance in all normal 3 Shoulder strap Working together with the clip material is under the requirements prescribed limits of SJ/T X: Represents the content of poisonous and harmful substance of a certain material are beyond the limited requirements of SJ/T /: Represents we did not find any poisonous and harmful substance out in these parts. 90% of parts is made of unharmful and non-poisonous save-environmental material, according to the limit of the global technology development level, the part with poisonous and harmful substance cannot replaced by toxic substance or elements