RSS Series Wired Electronic Ballasts
|
|
|
- Sybil Morgan
- 6 years ago
- Views:
Transcription
1 REV 02/16
2 RSS Series Wired s Specifications Charts RSS Installation Wiring Diagrams RSS Series Electronic Sign Ballasts Minimum starting temperature is -20 F (-30 C). For use with T12 HO, T8 HO, and Slimline 120 Volts, 50/60Hz For 800mA T12/HO Standard No. of Wiring Diagram 1 to 2 4' 16' RSS296AT* 120V ,2 2 to 4 8' 32' RSS496AT** 120V to 6 24' 48' RSS696AT*** 120V DIAGRAM 1 DIAGRAM 2 DIAGRAM 3 1-Lamp Combination 2-Lamp Combination 2-Lamp Combination /White No. of For 800mA T8/HO Standard Wiring Diagram 1 to 2 4' 12' RSS296AT 120V ,2 2 to 4 8' 24' RSS496AT 120V to 6 18' 36' RSS696AT 120V DIAGRAM 4 DIAGRAM 5 DIAGRAM 6 *For use with 1 10 lamp. **For use with 2 10 lamps. ***For use with 4 10 lamps. RSS Ballast Chart 3-Lamp Combination /White 4-Lamp Combination /White /White 4-Lamp Combination CAT# T8/T12 # of lamps RSS296AT T8 1-2 T Total Lamp Range (Feet) RSS296AT (T8) RSS296AT (T12) RSS496AT T8 2-4 T RSS496AT (T8) RSS496AT (T12) RSS696AT T8 4-6 T RSS696AT (T8) RSS696AT (T12) Dimensions and Weights CAT # Lead Length (Feet) Black White /White /Tan /Black RSS296AT RSS496AT RSS696AT /White DIAGRAM 7 DIAGRAM 8 5-Lamp Combination /White 6-Lamp Combination Insulate each unused wire separately where indicated on all wiring diagrams. CAT # Dimensions (Inches) Weight Length Width Height Mounting (lb) RSS296AT 11-3/4 3-3/ / L x 2 W 5 RSS496AT 14-7/16 3-3/16 2-5/ L x 2 W 10.5 RSS696AT 16-1/2 3-3/16 2-5/ L x 2 W 10.5 L Side View H Lamp 5 Lamp 5 Lamp 6 2 Top View Mounting (L) Slot Mounting (W) RSS Diagrams above can easily be used in both new installation and magnetic to electronic replacement applications. All ballasts must be grounded. 3
3 EESB Parallel Wired s Specifications Charts EESB Series Electronic Sign Ballasts Minimum starting temperature is -20 F (-30 C). For use with T12 HO, T8 HO, and Slimline 120 Volts, 50/60Hz No. of For 800mA T12/HO Standard *For use with up to 4 10 lamps ***DO NOT use 10 lamps For use with T12 HO, T8 HO, and Slimline 120/220/240/277 Volts, 50/60Hz *For use with up to 4 10 lamps **For use with up to 5 10 lamps Wiring Diagram 1 18" 8' EESB L 120V ,7 1 to 3 4' 24' EESB L 120V ,9 1 to 6 8' 32' EESB L 120V ,10 1 to 4 10' 40' EESB L * 120V ,11 2 to 6 10' 48' EESB L*** 120V ,12 No. of 1 to 4 1 to 2 2' 16' 4' 32' 1 to 6 2' 50' 2 to 6 10' 48' For 800mA T12/HO Standard 120V EESB-021L V 208V V V V EESB L V 208V V V V EESB L V** 208V V V V EESB L V* 208V V V Wiring Diagram For use with T12 HO, T8 HO, T8 50K hours Long Life, and Slimline 120/220/240/277 Volts 50/60/Hz No. Of 1 to 6 2' 48' For 315mA T8 Long Life Lamp Wiring Diagram 120V V EESB L V 240V V For use with T12 HO, T8 HO, T8 18K hours Medium Life, and Slimline 120/220/240/277 Volts 50/60/Hz No. Of 1 to 2 2' 12' For 375mA T8 HO Medium Life 120V EESB-021L V 208V V V V EESB L V 208V V V V EESB L V 208V V V V V V V *For use with up to 4 10 lamps Wiring Diagram 1 to 4 4' 24' to 6 2' 48' 2 to 6 10' 48' EESB L V*
4 EESB Parallel Wired s EESB Ballast Chart EESB New Installation Wiring Diagrams CAT # T8/T12 # of lamps EESB L T8 1 T Total Lamp Range (Feet) EESB L (T8) EESB L (T12) DIAGRAM 1 DIAGRAM 2 DIAGRAM 3 EESB L T8 1-3 T EESB L (T8) EESB L (T12) EESB L T8 1-6 T EESB L (T8) EESB L (T12) EESB L T8 1-4 T EESB L (T8) EESB L (T12) EESB L T8 2-6 T EESB L (T8) EESB L (T12) EESB-021L V T8 1-2 T EESB-021L V (T8) EESB-021L V (T12) DIAGRAM 7 DIAGRAM 8 DIAGRAM 9 EESB L V T8 1-4 T EESB L V (T8) EESB L V (T12) EESB L V EESB L V T8 1-6 T T8 Long Life 1-6 T8 2-6 T EESB L V (T8) EESB L V (T12) EESB L V (T8 Long Life) EESB L V (T8) EESB l V (T12) Dimensions and Weights CAT # Lead Length (Feet) Dimensions (Inches) Weight Black White Length Width Height Mounting (lb) EESB L /2 2-3/8 1-5/8 8-7/8 L x 1.7 W 2 EESB L / /4 11-1/8 L x 2.0 W 5 EESB L / /4 13-3/4 L x 2.0 W 8 EESB L / /4 13-3/4 L x 2.0 W 8 EESB L / /4 13-3/4 L x 2.0 W 8 EESB-021L V /2 2-3/8 1-5/8 8-7/8 L x 1.7 W 2.5 EESB L V / /4 13-3/4 L x 2.0 W 9.5 EESB L V / /4 13-3/4 L x 2.0 W 8 EESB L V / /4 13-3/4 L x 2.0 W 9 DIAGRAM 4 DIAGRAM 5 DIAGRAM 6 DIAGRAM 10 DIAGRAM 11 DIAGRAM 12 L Side View H Top View Mounting (L) Slot Mounting (W) Wiring diagrams for Allanson Lighting Components' EESB s are simpler, with half the connections found in old-style magnetics. are parallel wired, so if one burns out the others keep working. All ballasts must be grounded. 6 7
5 EESB Parallel Wired s Fluorescent H.O. Lamp Holders EESB Magnetic to Electronic Re-Wiring Diagrams Tombstone Lamp Holders DIAGRAM 1 DIAGRAM 2 EESB- 021L (2-LAMP MAGNETIC TO ELECTRONIC) EESB L (3-LAMP MAGNETIC TO ELECTRONIC) White Black 2-Lamp White Black 3-Lamp /White /White DIAGRAM 3 DIAGRAM 4 Flush Mount Lamp Holders EESB L & EESB L (4-LAMP MAGNETIC TO ELECTRONIC) EESB L/ V, EESB L, & EESB L (6-LAMP MAGNETIC TO ELECTRONIC) 4-Lamp /white 6-Lamp Lamp 5 /White Lamp 6 Lamp holder Ratings: 660W, 600V / 1000V rating Symbol indicates to join two lamp socket wires together and then to connect to one wire (blue or red). Symbol indicates cutting of jumper wires to disconnect the parallel connection of lamp sockets. Materials: GE resins, Ni plated steels, stainless steels, O ring, and tin bronze contacts were used in the manufacturing of Allanson lamp holders. The 12 lead assemblies are stranded 18AWG tinned copper and have 1015/1032 UL ratings 221 F (105 C) and 1000V. For a live demonstration, watch our Magnetic to Electronic Replacement Video. Mounting: High strength metal retaining clips ensure solid hold when installed per specifications. Mounting D Hole: Visit culus listed. UL listed for use in U.S.A and Canada. 8 9
6 Fluorescent Ballast Cross Reference Chart s Allanson Universal France Advance 148-AT DR 196-AT 268 DR 224-AT 268 DR AT DR ASB BL-TP 296-AT DR 348-AT DR 372-AT DR 2128 DR 396-AT DR 448-AT DR ASB BL-TP AT DR ASB BL-TP 496-AT DR ASB BL-TP 4120-AT DR ASB BL-TP 572-AT 568 DR 648-AT DR 672-AT DR ASB BL-TP 696-AT KR ASB BL-TP Electronic Replacement Transco RSS EESB TRA ' - 4' RSS296AT EESB L / EESB-021L V 18" - 8' RSS296AT EESB L TRA ' - 4' RSS296AT EESB-021L V 2' - 4' RSS296AT EESB-021L V TRA ' - 12' RSS296AT EESB L / EESB-021L V TRA ' - 16' RSS296AT EESB L / EESB-021L V TRA ' - 12' EESB L / EESB-021L V 12' - 18' EESB L / EESB-021L V TRA ' - 20' RSS496AT EESB L / EESB L V TRA ' - 24' RSS496AT EESB L / EESB L V TRA ' - 16' RSS496AT EESB L / EESB L V 16' - 24' RSS496AT EESB L / EESB L V TRA ' - 24' RSS496AT EESB L / EESB L V TRA ' - 32' RSS496AT EESB L / EESB L V TRA ' - 40' RSS696AT EESB L / EESB L V 20' - 30' RSS696AT EESB L / EESB L V TRA ' - 24' EESB L / EESB L V TRA ' - 36' RSS696AT EESB L / EESB L V TRA ' - 48' RSS696AT EESB L / EESB L V 148-AT-277V 168 KR 196-AT-277V 268 KR 272-AT-277V 268 KR 296-AT-277V 288 KR 348-AT-277V 348 KR 372-AT-277V 368 KR 396-AT-277V 388 KR 448-AT-277V 448 KR 472-AT-277V 468 KR 496-AT-277V KR 4120-AT-277V 4128 KR 572-AT-277V 568 KR 648-AT-277V 668 KR 672-AT-277V 668 KR 696-AT-277V 688 KR 2' - 4' EESB-021L V 18" - 8' EESB-021L V 4' - 12' EESB-021L V 12' - 16' EESB-021L V 6' - 12' EESB L V 12' - 18' EESB L V 18' - 24' EESB L V 8' - 16' EESB L V 16' - 24' EESB L V 24' - 32' EESB L V 20' - 40' EESB L V 20' - 30' EESB L V 12' - 24' EESB L V 24' - 36' EESB L V 30' - 48' EESB L V *EESB L V Ultimate Ballast Replaces all models listed
RSS Series Wired Electronic Ballasts
RSS Series Wired s Specifications Charts RSS Series Electronic Sign Ballasts Minimum starting temperature is -20 F (-30 C). For use with T12 HO, T8 HO, and Slimline 120 Volts, 50/60Hz RSS Installation
RSS Series Wired Electronic Ballasts
RSS Series Wired s Specifications Charts RSS Series Electronic Sign Ballasts Minimum starting temperature is -20 F (-30 C). For use with T12 HO, T8 HO, and Slimline 120 Volts, 50/60Hz No. of Lamp Circuits
RSS Series Wired Electronic Ballasts
RSS Series Wired s Specifications Charts RSS Series Electronic Sign Ballasts Minimum starting temperature is -20 F (-30 C). For use with T12 HO, T8 HO, and Slimline 120 Volts, 50/60Hz Per Circuit Combined
EESB Parallel Wired Electronic Ballasts
EESB Parallel Wired s Specifications Charts EESB Series Electronic Sign Ballasts Minimum starting temperature is -20 F (-30 C). For use with T12 HO, T8 HO, and Slimline 120 Volts, 50/60Hz No. of For 800mA
HOW TO READ AN ELECTRONIC SIGN
ELECTRONIC SIGN Ballasts CONTENTS 208 209 209 210 211 211 How To Read a Table T8/HO Sign Ballasts T12/HO Sign Ballasts Case Dimensions and Wiring Diagrams Cross Reference Guide Lamp Compatibility Specifications
AllPro Hazardous/Corrosive Area Fluorescent
CSA - Class I Div. 2 - Groups A, B, C, & D CSA - Class I Zone 2 - Groups IIA, IIB & IIC CSA - Class II Div. 1 & 2 - Groups E, F & G CSA - 4X UL 844 - Class I Div. 2 - Groups A, B, C, & D UL 4X UL - Outdoor
One Phase Power Distribution Block
Quick mounting and wiring Blocks fit with other DIN Rail mountable modular devices (height 95mm, depth 44.5mm) Accessories increase the number of outputs with only one input (applies only to and ) No caps
Connector System for Fluorescent Lighting Fixtures. Connectors for In-Line Mounting of Fluorescent Lighting Fixtures. Fully Polarized Connectors
Connector System for Fluorescent Lighting Fixtures Connectors for In-Line Mounting of Fluorescent Lighting Fixtures Fully Polarized Connectors Luminaire Disconnect Connectors Pluggable Lighting Connectors
A3000, LP3000 & CB3000
A3000, LP3000 & CB3000 Dimensions Inches (Millimeters) A3000 & LP3000 A31930307 LP307102 Specifications Rating: A3: 30A, 600V* LP3: 30A, 150V* CB3: 30A, 600V* Wire Range: #12-22 AWG Cu Center Spacing:
NEW. Datasheet. WMF 2.5 Terminal Series
Datasheet WMF 2.5 Terminal Series NEW The WMF 2.5 (multi-functional) terminal series is uniquely designed for DCS marshalling where increased functionality, improved spacing, higher wiring density and
Emergency Luminaire for Fluorescent Lamps Series EXLUX 6009
> As wall, ceiling and pendant light fitting or pole mounted light fitting > Version with 2 lamps: 18 W and 36 W > Central locking > All-pole disconnection via N/C switch when opening light fitting or
Max. Input Power (W) Input Current. Inrush Current
Output Power (W) Output Voltage (V) Output Current (A) Efficiency Tcase Max Input Current Max. Input Power (W) Inrush Current (Apk/µs) Max. THD (%) Min. Power Factor Surge Protection (KV) Weight (Lbs)
Terminal Blocks - Single Row. Series A3000, LP3000 & CB3000 Single Row Terminal Blocks
Series A3000, LP3000 & CB3000 Single Row Terminal SPECIFICATIONS Rating: A3: 30A, 600V* #12-22 AWG LP3: 30A, 150V #12-22 AWG CB3: 30A, 600V #12-22 AWG Wire Range: #12-22 AWG CU Center Spacing: 0.437 or
Male connector; with fixing flanges; 6-pole; pin spacing 5.08 mm / 0.2 in; for screw or similar mounting types; for parallel or perpendicular mounting
Male connector; with fixing flanges; 6-pole; pin spacing 508 mm / 02 in; for screw or similar mounting types; for parallel or perpendicular mounting Item No: 231-636/019-000 Male connector; with fixing
VersaPro Non-Metallic Fluorescent
CSA - Class I Div. 2 - Groups A, B, C, & D CSA - Class I Zone 2 - Groups IIA, IIB & IIC CSA - Class II Div. 2 - Groups F & G CSA - Class III CSA - Type 3 R Enclosed & Gasketed Features: Non-Metallic Fluorescent
Bulletin 700-HL 2-Pole Terminal Block Relay
Bulletin 700-HL 2-Pole Terminal Block Relay Bulletin 700-HL 2-Pole "Terminal Block Relay" Relay and socket assembled interface modules for high density interposing or isolation applications Screw terminal
A0 & CB0. Single Row Terminal Blocks. Dimensions- Inches (Millimeters) Specifications CB0
A0 & CB0 Dimensions- Inches (Millimeters) A0 0.12 (3.0) Ø A00110407 0.250 (6.35) Specifications Rating: 10 A, 300 V Center Spacing: 0.25 (6.35 mm) Wire Range: #16-30 AWG Screw Size: M3.0 nickel-plated
Inductive Proximity Sensor
Inductive Proximity Sensor Miniature, Slim-styled Proximity Sensor Space-saving Sensor ideal for timing cam and dog detection. Four mounting holes provided: two each mounting from side or rear of the housing.
ITS-Z0344 Half Pitch Interface Connectors
All non- product have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
Terminal Blocks - Single Row. Series A2000, LP2000 & CB2000 Single Row Terminal Blocks
Series A2000, LP2000 & C2000 Single Row Terminal A20510807WR SPECIFICATIONS Rating: A2: 30A, 300V* LP2: 30A, 150V* C2: 30A, 300V* Center Spacing: 0.375 or 3/8 (9.52mm) Wire Range: #12-22 AWG CU Screw Size:
Electrical Interconnection
Electrical Interconnection Edition 208/ Rail-Mount Terminal Block Systems Full Line Catalog, Volume Edition 207/208 PCB Terminal Blocks and Connectors Full Line Catalog, Volume 2 Edition 207/208 2 Automation
Ground Power Modules. And Accessories For Healthcare Facilities. Technical Bulletin NAE /
2 Ground Power Modules And Accessories For Healthcare Facilities Technical Bulletin NAE2092320 / 10.2011 Ground Power Modules Hospital grade outlet modules Introduction BENDER series GPM ground and power
www.greenelectricalsupply.com Page 1 of 4 DESCRIPTION Replacement for Conventional T12HO and T8HO Fluorescent Lamps for Sign Applications APPLICATION Used for Outdoor Signage (Single or Double Sided) PRODUCT
FDS / FDS-R / FDS-PS
FDS / FDS-R / FDS-PS USER MANUAL For use with 120V 60Hz input. Output is 120V 60Hz at 5amps 600W MAX. switched. ETL LISTED Conforms to UL STD 1241 3091594 79-15167-00 REV. A www.fiberstars.com Page 1 of
A2000, LP2000 & CB2000
A2000, LP2000 & CB2000 Dimensions Inches (Millimeters) A2000 & LP2000 A203504 LP201204 Specifications Rating: A2: 30A, 300V* LP2: 30A, 150V* CB2: 30A, 300V* Center Spacing: 0.375 or 3/8 (9.52mm) Wire Range:
Max. Input Power (W) Inrush Current (A pk /µs)
Output Power (W) Output Voltage (V) Output Current (A) Tcase Max Input Current (A) Max. Input Power (W) Inrush Current (A pk /µs) Max. THD (%) Min. Power Factor Surge Protection (KV) Weight (Lbs) Envir.
Bulletin 855E 50 mm Control Tower Stack Lights
Bulletin 855E 50 mm Control Tower Stack Lights Light Modules Sound Modules Flashing Incandescent 855E 10 FN 4 Voltage Light Module Type Lens Color 00 0 250V AC/DC (no lamp module) (1) XN Steady no lamp
Through-Board SMD PCB Terminal Block; 0.75 mm² Pin Spacing: 6.5 mm 2070 Series
Volume, Section SMD PCB Terminal Blocks Through-Board SMD PCB Terminal Block; 0.75 mm² 070 Series SMD PCB terminal blocks with Push-in CAGE CLAMP connection for back-side wiring of LED modules Low profile
Cat.8 Shielded Keystone Jack Description
Description RiT s CAT8 Shielded Keystone Jacks are cost-effective building blocks for your cabling system. Meticulously engineered to deliver exceptional performance while streamlining installations. Phosphor
Compact Fluorescent Lampholders
Table of Contents GR14q 26.738 [03] 14, 15 GZ16q 26.739 [03] 16 G23 26.719 [03] 17-19 26.721 [03] 17, 18 GX23 / GX23-2 26.720 [03] 20, 21 Supports for TC-S lamps 26.719 [03] 22-24 G24 / GX24 26.745 [03]
Terminal Blocks - Single Row. Series A2000, LP2000 & CB2000 Single Row Terminal Blocks. Terminal Blocks: Single Row. EuroMag Series.
Series A2000, LP2000 & C2000 Terminal locks A201108WR SPECIFICATIONS Rating: A2: 30A, 300V* LP2: 30A, 150V* C2: 30A, 300V* Center Spacing: 0.375 or 3/8 (9.52mm) Wire Range: #12-22 AWG Cu Screw Size: #6-32
Item No.: /
Angled female connector; with snap-in mounting foot; 3-pole; pin spacing 5 mm / 097 in; 00% protected against mismating; for panel mounting; Plate thickness 06x2 mm; Fixing holes 35 mm Ø Item Angled female
PERFECT HANDLING. PCB Front Panels & Injector/Extractor Handles... Package Your Electronics With Ripac.
Front Panels & Injector/Extractor Handles... PERFECT HANDLING. Package Your Electronics With Ripac. When it comes to electronics, no one handles today s demanding applications better than Rittal Ripac
SSL - Top Load Socket
The 9159 series of Board-to-Board interconnect system allows two PCB's to be mated end-to-end creating strips of LED lighting. Designed specifically for the unique Solid State Lighting (SSL) market requiring
Max. Input Power (W) Inrush Current (A pk /µs) LED ARRAY
Electrical Specifications LEDINTA0024V41DLO Max. Power (W) Voltage (V) Current (A) Tcase Max Input Current (A) Max. Input Power (W) Inrush Current (A pk /µs) Max. THD (%) Min. Power Factor Surge Protection
Pixus Technologies Catalog
The Power of Embedded Ingenuity Pixus Technologies Catalog Kaparel, Ripac, & Vario Brand Products www.pixustechnologies.com sales@pixustechnologies.com US: 96.524.8242 CAN: 59.885.5775 Product Diversity
Principal LED Street Stik Fluorescent Bulb Replacements
Principal LED Street Stik Fluorescent Bulb Replacements LED Retrofit Guide (PL-RT1-001) WARNING Installation must only be performed by a licensed electrician. To prevent death, injury or damage to property
Overview These instructions are presented as a guideline for installing and setting up the LX Series Breaker Control Panel.
LX Breaker Control Panels Installation and Setup Procedure Hubbell Building Automation, Inc. 9601 Dessau Road Building One Suite 100 Austin, Texas 78754 512-450-1100 512-450-1215 Fax www.hubbell-automation.com
Principal LED Qwik Stik Fluorescent Bulb Replacements
Principal LED Qwik Stik Fluorescent Bulb Replacements LED Retrofit Guide (PL-RT1-001) WARNING Installation must only be performed by a licensed electrician. To prevent death, injury or damage to property
CHANNEL LETTER LIGHTING UNIQUE LIGHTING SOLUTIONS RETROFIT INSTALLATION GUIDE
UNIQUE LIGHTING SOLUTIONS LIGHTING WARNING -Installation must only be performed by a licensed electrician. -To prevent death, injury or damage to property this product must be installed in accordance to
Transparent Covers for Rail-Mounted Terminal Blocks, Usable with Lead Seals Description and Handling
Transparent Covers for Rail-Mounted Terminal Blocks, Usable with Lead Seals Description and Handling 572 Assembly Application Snapping a cover carrier onto the carrier rail. Application examples: cover
PANELITE ENCLOSURE LIGHTS OVERVIEW
SPEC-00581 H763.422.2211 763.422.2600 ELECTRICAL LIGHTING PACKAGES ELECTRICAL LIGHTING PACKAGES PANELITE ENCLOSURE LIGHTS OVERVIEW FEATURES Slim profile allows light to be tucked up out of the way for
BusBoard Prototype Systems - Built for designers BPS-MAR-BB830+BB830T-001 Rev 3.05
BB830, BB830T Plug-in BreadBoards 830 tie point solderless plug-in breadboards provide a quick way to build and test circuits for experimentation or when learning electronics. BB830-830 tie-point plug-in
APPLICATION NOTES. Connectors for LED Lighting Applications. Co-Planar Board Mating FIG. 1
APPLICATION NOTES Connectors for LED Lighting Applications Mill-Max addresses the connector needs of the growing field of LED lighting applications with products such as receptacles and sockets suitable
BusBoard Prototype Systems - Built for designers BPS-MAR-BB300+BB Rev 3.05
BB300, BB400 Plug-in BreadBoards 300 and 400 tie point solderless plug-in breadboards provide a quick way to build and test circuits for experimentation or when learning electronics. When the BR1 830 tie-point
Type NT and Type ZWM Terminal Blocks
Type NT and Type ZWM Terminal Blocks Unit-pole construction Sliding link to permit testing without disturbing wiring High barriers that prevent shorting between poles Class 1E qualified per IEEE RECOGNIZED
Telephone Accessories USA / Canada - Telefon-Zubehör
7590 01 Standard Flush Mount Jacks Flush mount jacks are available in smooth-finish single-jack or duplex models, and Decora styles. ll feature one-piece construction and install easily in standard electrical
Switches & Pilot Devices
Key features: 21/64 (8mm) round mounting hole Compact Design Saves Space Bright and Vivid Illumination Choice of Shapes and Functions old Clad Silver Contacts for reliable low level switching Snap action
Diffuser Color (when not illuminated) Light amber hue
PRODUCT SUMMARY PRODUCT FEATURES Four Kelvin temperatures Energy efficient Long lifetime Stable and consistent color temperature Low voltage Easy to install Cool to the touch For use as exterior or interior
Arrakis 30 - Monochromatic Model No: ARR US
Arrakis 30 Monochromatic Model No: ARR.003.36.US Date: Fixture Type: Project: Specifier/Rep: Certified by C ompliance LM7908 and LM8008 Available for International specifications by adding 'INT' at the
NT-2300 Series Dual Circuit Track System & Accessories
ILLUMINATING THE FUTURE...SINCE 1989 NT-2300 Series Dual Circuit Track System & Accessories Type Project Catalog No. Lamp/Wattage PRODUCT DESCRIPTION Low profile, extruded aluminum track with 20-Amp rated
Installation Manual Rev D MiniProx Readers - Wiegand 5365B and Clock and Data 5368B
Installation Manual - 5365-902 Rev D MiniProx Readers - Wiegand 5365B and Clock and Data 5368B Web page, E-mail - www.prox.com MiniProx Reader Installation Manual 5365-902 REV D 1 of 7 MiniProx Reader
Answer Modular Power. Page 1 of Rev V. Power Kits. Change of Height Harness. Receptical Covers
Answer Modular Power Change of Height Harness Power Kits Receptical Covers NOTE: Unused modular electrical connector openings are not required to be capped. NOTE: The electrician can cut conduit and wire
SBE 80 / SBO 60 Connectors - up to 80 Amps
Connectors - up to 80 Amps SBE and SBO connectors build on the capability of the two pole SB connectors by offering up to 8 auxiliary power / signal contacts along with an IEC 60950 touch safe housing.
POSEIDON SCIENTIFIC INSTRUMENTS PTY LTD 17 QUEEN VICTORIA ST, FREMANTLE WA PHONE (08) FAX (08) MWA-3014
CABLE DRAWING: DRAWING TITLE: ATIM-T Power Cable POSEIDON SCIENTIFIC INSTRUMENTS PTY LTD 17 QUEEN VICTORIA ST, FREMANTLE WA 6160. PHONE (08) 9430 6639 FAX (08) 9335 4650 MWA-3014 DRAWING NO.: MWACAB-0014
Cat.8 Shielded Field Termination Plug Description
Description RiT s CAT8 Shielded field termination plug are cost-effective building blocks for your cabling system. Meticulously engineered to deliver exceptional performance while streamlining installations.
AX SERIES XLR CABLE CONNECTORS
AX SERIES XLR CABLE CONNECTORS The revolutionary AX series of XLR connectors introduce an exciting contemporary look and feel to the professional audio interconnect market. They are designed to complement
Medium Capacity Standard Size Toggles Series S
GENERAL SPECIFICATIONS FOR S ~ S9 (Resistive & Inductive Load) Power Level: Shown in the following tables Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life:
for a perfect electrical installation. The range of rail-mounted terminal blocks
The range of rail-mounted terminal blocks for a perfect electrical installation. The range of rail-mounted terminal blocks for a perfect electrical installation. The new standard for rail-mounted terminal
Slim Relay G2RV. Model Number Structure. Ordering Information. Model Number Legend. List of Models. Relay and Socket Combinations
Slim Relay G2RV The World's First Industrial Slim Relay Large plug-in terminals for reliable connection. LED indicator and mechanical flag to check operation. Transparent housing enables checking relay
User Manual CS-SA Series 'SUPER ANALOG' Time Fade Stations JOHNSON SYSTEMS INC.
User Manual CS-SA Series 'SUPER ANALOG' Time Fade Stations JOHNS SYSTEMS INC. Contents Warranty...2 User Manual Copies...2 Introduction...3 Features...3 CS-SA Series Control Station Diagrams...4, DIM and
Inductive Proximity Sensor
Inductive Proximity Sensor Subminiature Sensor with Cable Amplifier Offers Greater Mounting Flexibility Programmable Controller-compatible Subminiature, shielded sensing head (3 or 8 dia.) allows the Sensor
SP1 MP1 WP2 WP1. 125kHz reader models with the following prefixes: 13.56MHz reader models with the following prefixes:
DOC0067 Issue 1.2 Reader Wiring InSTRUCTIONS SP1 MP1 WP2 WP1 125kHz reader models with the following prefixes: 13.56MHz reader models with the following prefixes: MP1-EM1 MP1-HT1 MP1-DP1 WP1-EM1 WP1-HT1
A2, LP2 & CB2. Single Row Terminal Blocks. Dimensions Inches (Millimeters) Specifications A2 & LP2 CB2
A2, LP2 & CB2 Dimensions Inches (Millimeters) A2 & LP2 LP201204 A203504 Specifications Rating: A2: 30A, 300V* LP2: 30A, 150V* CB2: 30A, 300V* Center Spacing: 0.375 or 3/8 (9.52mm) Wire Range: #12-22 AWG
industrial panel lamps
features specifications Typical characteristics (Ta = C) Ø8.1mm mounting Robust bright nickel plated brass housing Low profile styling, sunlight readable LEDs Sealed to IP67 Internal reverse protection
Max. Input Power (W) Inrush Current (A pk /µs)
Electrical Specifications LEDINTA0024V41FLO Output Power (W) 100 Output Voltage (V) 24 cv 3.5~24 cc Output Current (A) 0.10~4.16 cv 4.16 cc Tcase Max cv = constant voltage mode, cc = constant current mode
Preliminary. Sensors. EasySense. Fixture-Mount for Networks
Sensors EasySense Fixture-Mount for Networks EasySense for networks is based on zigbee technology for use in wireless systems for indoor connected lighting. It provides a simple solution to actively manage
Cat. No. (Spring Clamp. Input Voltage
Bulletin -HL Product Overview/Product Selection Product Selection Bulletin -HL "Terminal Block Relay" Relay and socket assembled interface modules for high density interposing or isolation applications
CONSOLE CONNECTOR KIT 9501 INSTALLATION INSTRUCTIONS
CONSOLE CONNECTOR KIT 9501 INSTALLATION INSTRUCTIONS FOR USE WITH: HAMMOND Organ Models L-100, M-100 Series, M-l, M-2, M-3 LESLIE Speaker Models 760, 770, 825 KIT CONTENT Console Connector Assembly 043075
Linear Luminaire with LED Series 6012/5
> For use in Zones 1 & 2, 21 & 22 > Latest LED technology with a high luminous efficacy and a long service life > Extra flat version for low mounting depth > Powder-coated sheet-steel or brushed stainless
AB-2D AB-2D SPEAKER A,B OR A+B SELECTOR INSTALLATION & OPERATION GUIDE
M O D E L AB-2D AB-2D SPEAKER A,B OR A+B SELECTOR INSTALLATION & OPERATION GUIDE AB-2D Speaker/Amplifier Selector TABLE OF CONTENTS Introduction 1 Features and Benefits 1 Installation Considerations 3
Quick Installation Guide
IP816A-LPC License Plate Capturing Solution Quick Installation Guide 2MP WDR Pro Remote back Focus Snapshot Focus Ordering part no.: 180000600G - IP816A-LPC(Street) Document part no.: 625030101G Rev. 1.1
Model Number AC-60CD1.4APPU
ELECTRICAL SPECIFICATIONS: Programmable, Digital, Wide-Range Ajustable Current & Dimming Class P Listed Constant Current LED Driver Model Number AC-6CD.4APPU Input Voltage: 2-277V Input Frequency: 5/6Hz
REMOTE HEAD ADAPTER INSTALLATION GUIDE
REMOTE HEAD ADAPTER INSTALLATION GUIDE The Remote Head adapter is a valuable accessory for the Uniden BC-780, 785 and 796 scanners. It allows the scanner's control panel to be removed from the radio and
Modular Terminal Blocks and Terminal Strips with CAGE CLAMP, Series 260 to 262, Side-Entry
36 Modular Terminal Blocks and Terminal Strips with CAGE CLAMP, Series 260 to 262, Side-Entry Assembly Assembly of modular terminal blocks to terminal strips Mounting of an end plate screw fixing CAGE
INDICATOR LIGHTS SECTION R INDICATOR LIGHTS. Rectangular Indicator Lights. Round AC LED Indicator Lights. Large Format Indicator Lights
SECTION R Rectangular Indicator Lights Round Indicator Lights Large Format Indicator Lights Round DC LED Indicator Lights Round AC LED Indicator Lights Flashing Series LED Lights R3 R4 - R6 R7 R8 - R10
Rigel 3000K - Optics 13 LED Spot - White Model No: RIG US
Rigel 3000K Optics 13 LED Spot White Model No: RIG.003.01.US Date: Fixture Type: Project: Specifier/Rep: Certified by C ompliance LM7908 and LM8008 Available for International specifications by adding
Heavy Duty Terminal Blocks
General Information: are available in two styles Deadfront Type (1100, 1200, 985 and 0987 series) and Barrier Type (1500, 1600 and 1700 series). Ratings and Standards: The voltage ratings of terminal blocks
5000 Series Bench Scale Platforms
Service / Installation Manual 5000 Series Bench Scale Platforms 51245 2010-2013 by Fairbanks Scales, Inc. Revision 3 07/13 All rights reserved Amendment Record 5000 SERIES BENCH SCALE PLATFORMS SERVICE
GV-EL124S Electric Strike
GV-EL124S Electric Strike Featured with a built-in door status sensor, the GV-EL124S is a fail-secure electric strike, but it is field convertible from fail secure to fail safe. It can be mounted either
[.050 (1.27mm) Density. D-Microminiature]
![[.050 (1.27mm) Density. D-Microminiature]](/thumbs/90/103901339.jpg "[.050 (1.27mm) Density. D-Microminiature]")
Commercial [.050 (1.27mm) Density Solder Introduction Cup/Wire D-Microminiature] Cinch Commercial Products, consisting of Jones Plugs and Sockets, Barrier Blocks, Edge Cards, Two-Piece Commercial Dins,
Product information 19" 3U Global Patch Panel 48xRJ45/u, Cat. 6, partly populated R302361
Product information 19" 3U Global Patch Panel 48xRJ45/u, Cat. 6, partly populated R302361 1 Pcs. 19" 3U Global patch panel/u incl. cable tie shelf 12 connection module holders Global/u 3 Global blind covers
9008 LuxStrip II 6 Line
DATA SHEET Page 1 of 5 Product Overview The LuxStrip II 9008 is a powerful, compact light engine built on a Printed Circuit Board (PCB) and thermally engineered to accommodate high brightness LEDs. Utilizing
Industrial Control. 50 to 5,000 VA. Applications. Specifications. Standards. Options and Accessories. Features, Functions, Benefits.
Industrial Control 6 50 to 5,000 VA Applications n For commercial and industrial control applications including; control panels, conveyor systems, machine tool equipment, pump systems, and commercial air
FLUORESCENT FIXTURES
FLUORESCENT FIXTURES J7WRAP2/32ISMV 7.5 STANDARD WRAPAROUND FIXTURE 2 x 32W, Instant Start, 120-277V, 50/60Hz, Electronic T8 Ballast, 48 in length Nominal 8" width with a shallow design Clear acrylic diffuser
Exiway One LED Technical specifications Activa and Dardo versions
One LED Activa and Dardo versions DB122858 DB12300 P10675 Versions Activa Dardo It Es Be e,, e Protection rating IP65 IP65 Fresnel cover glass Autonomy 1 h 2 h Adaptale exit sign Average flux in emergency
Instruction Bulletin. Fiber Optic Switch Packs. SLSPSP101 and SLSPSP102 for use with Luminaires INTRODUCTION CONTENTS OF THE BOX
Instruction Bulletin 63249-500-04A3 07/2010 Fiber Optic Switch Packs SLSPSP101 and SLSPSP102 for use with Luminaires INTRODUCTION SLSPSP101 Single Input Switch Pack SLSPSP102 Dual Input Switch Pack The
Source Four 70W HID jr Zoom
S P E C I F I C A T I O N s PHSICAL Rugged die cast aluminum construction 20 gauge stainless steel shutters in a bi-plane assembly High impact, thermally insulated knobs and shutter handles Two accessory
Replacing the Power Supply
APPENDIX B This appendix includes information on how to replace the power supply for the Cisco AS550XM universal gateway and contains the following sections: Safety Recommendations, page B-1 Required Tools
D10CC150HV10F. HRV ( V) Dimmable LED Driver 1050mA, Constant Current Output 0 10V Dimming to 10% Thermal Foldback Control.
HRV (347 480V) Dimmable LED Driver 1050mA, Constant Current Output 0 10V Dimming to 10% Thermal Foldback Control Performance Input Voltage 347 ~ 480 Vac ± 10% Input Current Max 0.48 /347V 0.34/480V Input
MS-4000: ShootingStar Reader
: ShootingStar Reader The ShootingStar Reader The ShootingStar Reader is intended for installation on a solid metal surface, in proximity applications where a vandal-proof reader is required. The reader
PROJECT: SPECIFIER: TYPE: QTY: OUTPUT LEVEL: COLOR: LENGTH X WIDTH: MOUNTING: DIMMING/CONTROLS:
PROJECT: SPECIFIER: TYPE: QTY: Available in 5 output levels of Static White at 24 Volts RGB and RGBW available at 24 Volts Tunable White and Double Sided available Great for creating Luminous Ceilings
920 Remote Control (RC) Switches
920 Remote Control (RC) Switches ASCO is the global leader in power switching and controls ASCO 920 PRODUCT SPECIFICATIONS SWITCH ONLY (PANELBOARD MOUNTING) 1,2,3 () DIMENSIONS, IN.(MM) WIDTH HEIGHT DEPTH
Case Expansion Transducer Systems
Case Expansion Transducer Systems Product Datasheet Bently Nevada* Asset Condition Monitoring Description Thermal Case Growth Measurements in Large Turbines An important position measurement in Turbine
Pixus Technologies Catalog
The Power of Embedded Ingenuity Pixus Technologies Catalog Kaparel, Ripac, & Vario Brand Products www.pixustechnologies.com sales@pixustechnologies.com S: 96.524.8242 CAN: 59.885.5775 Product Diversity
4Cu-LSA Connection technology
4Cu-LSA technology LSA- technology: Patch panels, Telephone Patch Panels, RJ45, Tera, Office-Patch Panels, Data outlets, surface mounting, flush mount, underfloor, 60 Table of Contents Office DC FTTX Patch
Data sheet C6 A modul 90 jack
Illustrations Dimensional drawing Cut-out Page 1/7 See enlarged drawings at the end of document Product specification modular Cat.6 A termination unit RJ45 mounting version: module, 90 cable feed solid,
Chemical Resistant Inductive Prox
Chemical Resistant Inductive Prox Fluoroplastic Housing Sensor Performs Accurately Under Harsh Environmental Conditions Full body resin housing and nuts resist weld spatter Rugged watertight fluoroplastic
Optional Accessories (to be ordered separately if required)
Sockets for RMI Relays ZMI 2NA ZMI 4NA TOP VIEW 72/2.83 3.2/0.3 5 4 2 3 9 22.5/0.88 6 NO 7 24 34 2 22 NC 3 32 2 0 COM 3 27/.06 8 44 4 42 4 4 2 9/0.35 75/2.95 LATERAL VIEW ZMI 4NA 40/.57 75/2.95 Socket
Classification Enclosure rating Input voltage Type of
Slim Relay G2RV The World's First Industrial Slim Relay Large plug-in terminals for reliable connection. LED indicator and mechanical flag to check operation. Special input type with gold plated contacts.