Lead free and RoHS package. High reduction of parasitic elements through integration Complies with IEC level 4 standards:
|
|
|
- Godwin Shields
- 5 years ago
- Views:
Transcription
1 Datasheet Common mode filter with ESD protection for high speed serial interface Features 5GHz differential bandwidth to comply with HDMI 2.0, HDMI 1.4, USB 3.1, MIPI, Display port, etc. High common mode attenuation on LTE, GSM, GPS and WLAN frequencies: -13 db at 0.7 GHz -23 db at 1.5 GHz -25 db at 2.4 GHz -23 db at 2.7 GHz -13 db at 5.0 GHz Very low PCB space consumption Thin package: 0.5 mm max. D1+ to connector 1 10 D1+ to IC Lead free and RoHS package D1- to connector 2 9 D1- to IC High reduction of parasitic elements through integration Complies with IEC level 4 standards: GND D2+ to connector GND D2+ to IC ±15 kv (air discharge) ±8 kv (contact discharge) D2- to connector 5 6 D2- to IC Product status ECMF4-20A42N10 Applications Notebook, laptop Streaming box Set top box Portable devices Description The is a highly integrated common mode filter designed to suppress EMI/RFI common mode noise on high speed differential serial buses like HDMI 2.0, HDMI1.4, USB 3.1 Gen 1, Ethernet, MIPI, Display port and other high speed serial interfaces. It has a very large differential bandwidth to comply with these standards and can also protect and filter 2 differential lanes. DS Rev 3 - May 2018 For further information contact your local STMicroelectronics sales office.
2 ECMF4-20A42N10 Characteristics 1 ECMF4-20A42N10 Characteristics Table 1. Absolute maximum ratings (T amb = 25 C) Symbol Parameter Value Unit IEC : V PP Peak pulse voltage Contact discharge 8 kv Air discharge 15 I RMS Maximum RMS current 100 ma T op Maximum operating temperature range -55 to +125 T stg Storage temperature range -55 to +150 C T L Maximum temperature for soldering during 10 s 260 Figure 2. Electrical characteristics (definitions) I VRM Maximum stand-off voltage VCL Clamping voltage at peak pulse current IPP IRM Leakage current at VRM IPP Peak pulse current VBR Breakdown voltage C DIODE ESD diode capacitance RDC DC serial resistance f C Differential cut off frequency I PP I R I RM V CL V BR V RM V Table 2. Electrical characteristics (T amb = 25 C) Symbol Test conditions Min. Typ. Max. Unit V BR I R = 1 ma V I RM V RM = 3 V per line 100 na R DC DC serial resistance, I DC = 20 ma 5.5 Ω f c Differential mode cut-off frequency at -3 db 5.0 GHz I PP = 1 A - 8/20 μs 10 V CL 8 kv contact discharge after 30 ns, IEC V C diode V BIAS = 0 V, 2.5 GHz f 6 GHz, V OSC = 30 mv pf DS Rev 3 page 2/14
3 Characteristics (curves) Table 3. Pin description Pin number Description Pin number Description 1 D1+ to connector 6 D2- to IC 2 D1- to connector 7 D2+ to IC 3 GND 8 GND 4 D2+ to connector 9 D1- to IC 5 D2- to connector 10 D1+ to IC 1.1 Characteristics (curves) Figure 3. Differential attenuation versus frequency (Z 0 DIFF = 100 Ω) Figure 4. Common mode attenuation versus frequency (Z 0 COM = 50 Ω) Figure 5. USB3.1 Gen Gbps eye diagram without ECMF4-20A42N10 (test conditions: type C connector, reference cable and equalizer) Figure 6. USB3.1 Gen Gbps eye diagram with ECMF4-20A42N10 (test conditions: type C connector, reference cable and equalizer) DS Rev 3 page 3/14
4 Characteristics (curves) Figure 7. USB3.1 Gen Gbps eye diagram without ECMF4-20A42N10 (test conditions: type C connector, reference cable equalizer with A DC = 6 db and DFE) Figure 8. USB3.1 Gen Gbps eye diagram with ECMF4-20A42N10 (test conditions: type C connector, reference cable equalizer with A DC = 6 db and DFE) Figure 9. HDMI Gbps eye diagram without ECMF4-20A42N10 Figure 10. HDMI Gbps eye diagram with ECMF4-20A42N10 Figure 11. HDMI Gbps eye diagram without ECMF4-20A42N10. (test conditions : worst case cable and equalizer) Figure 12. HDMI Gbps eye diagram with ECMF4-20A42N10. (test conditions : worst case cable and equalizer) DS Rev 3 page 4/14
5 Characteristics (curves) Figure 13. HDMI Gbps eye diagram without ECMF4-20A42N10. (test conditions: worst case cable, equalizer and CTLE) Figure 14. HDMI Gbps eye diagram with ECMF4-20A42N10. (test conditions: worst case cable, equalizer and CTLE) Figure 15. DP HBR2 5.4 Gbps eye diagram without ECMF4-20A42N10. (test conditions : with cable and equalizer) Figure 16. DP HBR2 5.4 Gbps eye diagram with ECMF4-20A42N10. (test conditions : with cable and equalizer) Figure 17. Mipi Gear Gbps eye diagram without ECMF4-20A42N10 Figure 18. Mipi Gear Gbps eye diagram with ECMF4-20A42N10 DS Rev 3 page 5/14
6 Characteristics (curves) Figure 19. ESD response to IEC (+8 kv contact discharge) Figure 20. ESD response to IEC (-8 kv contact discharge) Figure 21. TLP characteristic 20 I PP (A) Positive polarity Negative polarity V CL (V) DS Rev 3 page 6/14
7 Package information 2 Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: ECOPACK is an ST trademark. 2.1 µqfn10l package information Figure 22. µqfn10l package outline Top view D Idex area E A Side view A1 A3 seating plane Bottom view e b 1 5 PIN # 1 ID L 10 6 Table 4. µqfn10l package mechanical data Dimensions Ref. Millimeters Min. Typ. Max. A A A b D E e 0.40 L DS Rev 3 page 7/14
8 µqfn10l package information Figure 23. Marking layout MF Note: The marking codes can be rotated by 90 or 180 to differentiate assembly location. In no case should this product marking be used to orient the component for its placement on a PCB. Only pin 1 mark is to be used for this purpose. Figure 24. Tape and reel outline Pin 1 located according to EIA-481 P0 Ø D0 B0 W E1 F P1 P2 A0 Ø D1 K0 User direction of unreeling Note: Pocket dimensions are not on scale Pocket shape may vary depending on package Table 5. Tape and reel mechanical data Ref. Dimensions (millimeters) Min. Typ. Max. P P Ø D Ø D F E DS Rev 3 page 8/14
9 µqfn10l package information Ref. Dimensions (millimeters) Min. Typ. Max. K P W A B DS Rev 3 page 9/14
10 Recommendation on PCB assembly 3 Recommendation on PCB assembly 3.1 Footprint Figure 25. Footprint in mm SMD footprint design is recommended. 3.2 Stencil opening design Recommended design reference: stencil opening thickness: 100 μm Figure 26. Stencil opening recommendations DS Rev 3 page 10/14
11 Solder paste 3.3 Solder paste 1. Halide-free flux qualification ROL0 according to ANSI/J-STD No clean solder paste is recommended. 3. Offers a high tack force to resist component movement during PCB movement. 4. Solder paste with fine particles: powder particle size is μm. 3.4 Placement 1. Manual positioning is not recommended. 2. It is recommended to use the lead recognition capabilities of the placement system, not the outline centering 3. Standard tolerance of ±0.05 mm is recommended N placement force is recommended. Too much placement force can lead to squeezed out solder paste and cause solder joints to short. Too low placement force can lead to insufficient contact between package and solder paste that could cause open solder joints or badly centered packages. 5. To improve the package placement accuracy, a bottom side optical control should be performed with a high resolution tool. 6. For assembly, a perfect supporting of the PCB (all the more on flexible PCB) is recommended during solder paste printing, pick and place and reflow soldering by using optimized tools. 3.5 PCB design preference 1. To control the solder paste amount, the closed via is recommended instead of open vias. 2. The position of tracks and open vias in the solder area should be well balanced. A symmetrical layout is recommended, to avoid any tilt phenomena caused by asymmetrical solder paste due to solder flow away. 3.6 Reflow profile Figure 27. ST ECOPACK recommended soldering reflow profile for PCB mounting 250 Temperature ( C) 2-3 C/s C -2 C/s sec (90m ax) -3 C/s C/s C/s 50 Time (s) Note: Minimize air convection currents in the reflow oven to avoid component movement. Maximum soldering profile corresponds to the latest IPC/JEDEC J-STD-020. DS Rev 3 page 11/14
12 ECMF4-20A42N10 Ordering information 4 ECMF4-20A42N10 Ordering information Figure 28. Ordering information scheme ECMF 4-20 A 42 N10 Function ESD Common Mode Filter Number of lines 4 = 2 lanes Rejection peak 20= 2.0GHz Version Differential bandwidth 42 = 4.2GHz Package N10 = µqfn -10 L Table 6. Ordering information Order code Marking Package Weight Base qty. Delivery mode ECMF4-20A42N10 MF (1) µqfn-10l 3.9 mg 3000 Tape and reel 1. The marking can be rotated by 90 to differentiate assembly location DS Rev 3 page 12/14
13 Revision history Table 7. Document revision history Date Revision Changes 16-May Initial release. 12-Apr Updated Section 1.1 Characteristics (curves), Table 4. µqfn10l package mechanical data and Table 6. Ordering information. Added Table 5. Tape and reel mechanical data, Section 3.1 Footprint, Figure 7. USB3.1 Gen Gbps eye diagram without ECMF4-20A42N10 (test conditions: type C connector, reference cable equalizer with A DC = 6 db and DFE), Figure 8. USB3.1 Gen Gbps eye diagram with ECMF4-20A42N10 (test conditions: type C connector, reference cable equalizer with A DC = 6 db and DFE) and Section 3.2 Stencil opening design. 28-May Updated Section Product status / summary. DS Rev 3 page 13/14
14 IMPORTANT NOTICE PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries ( ST ) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document STMicroelectronics All rights reserved DS Rev 3 page 14/14
Exceeds IEC level 4 standards: ±25 kv (air discharge) ±10 kv (contact discharge) Notebook, laptop Streaming box
Datasheet Common mode filter with ESD protection for high speed serial interface Features 6.4 GHz differential bandwidth to comply with HDMI 2.1, HDMI 2.0, HDMI 1.4, USB 3.1 Gen 1 and Gen 2, MIPI, display
Common mode filter with ESD protection for high speed serial interface
Common mode filter with ESD protection for high speed serial interface Datasheet - production data µqfn-10l 2.60 x 1.35 mm Description The is a highly integrated common mode filter and low pass filter
8-line IPAD low capacitance EMI filter and ESD protection in QFN package
Datasheet 8-line IPAD low capacitance EMI filter and ESD protection in QFN package Features 1 QFN 16L 3.3 mm x 1.5 mm (bottom view) 100 Ω Input 1 Output 1 C = 22.5 pf C = 22.5 pf Typical line capacitance
HSP051-4M10. 4-line ESD protection for high speed lines. Datasheet. Features. Applications. Description
Datasheet 4-line ESD protection for high speed lines Features I/O 1 I/O 2 GND 3 I/O 3 I/O 4 1 2 4 µqfn-10l package Functional schematic (top view) 10 9 8 7 5 6 Internal ly not connected GND Internal ly
HSP051-4M10. 4-line ESD protection for high speed lines. Applications. Description. Features. Benefits. Complies with following standards
4-line ESD protection for high speed lines Datasheet production data Benefits High ESD protection level High integration Suitable for high density boards Figure 1. Functional schematic (top view) I/O 1
HSP051-4N10. 4-line ESD protection for high speed lines. Applications. Description. Features. Benefits. Complies with following standards
4-line ESD protection for high speed lines Datasheet production data Benefits High ESD protection level High integration Suitable for high density boards Figure 1. Functional schematic (top view) I/O 1
HSP061-4M10. 4-line ESD protection for high speed lines. Datasheet. Features. Applications. Description
Datasheet 4-line ESD protection for high speed lines Features I/O I/O 2 GND 3 I/O 3 I/O 4 2 4 µqfn-0l package Functional schematic (top view) 0 9 8 7 5 6 Product status HSP06-4M0 Internal ly not connected
ESDZV5-1BV2. Ultra-low clamping single line bidirectional ESD protection in extra-small package. Datasheet. Features. Applications.
Datasheet Ultra-low clamping single line bidirectional ESD protection in extra-small 01005 package Features Ultra-low clamping voltage: +/-7 V IEC 61000-4-2 8 kv contact discharge at 30 ns Bidirectional
HSP line ESD protection for high speed lines. Applications. Description. Features. µqfn 4 leads. Benefits. Complies with following standards
2-line ESD protection for high speed lines Datasheet - production data Benefits High ESD robustness of the equipment Suitable for high density boards Complies with following standards MIL-STD 883G Method
ESDALC20-1BF4. Low clamping, low capacitance bidirectional single line ESD protection. Description. Features. Applications
Low clamping, low capacitance bidirectional single line ESD protection Description Datasheet - production data The ESDALC20-1BF4 is a bidirectional single line TVS diode designed to protect the data line
ESDA17P100-1U2M. High power transient voltage suppressor. Description. Features. Applications
High power transient voltage suppressor Datasheet - production data Description The ESDA17P100-1U2M is a unidirectional single line TVS diode designed to protect the power line against EOS and ESD transients.
ESDA7P60-1U1M. High power transient voltage suppressor. Description. Features. Applications. Complies with the following standards:
High power transient voltage suppressor Description Datasheet - production data The ESDA7P60-1U1M is a unidirectional single line TVS diode designed to protect the power line against EOS and ESD transients.
ECMF02-2HSMX6. ESD protected common mode filter for USB3.0 interface. Description. Applications. Features. Benefits
ESD protected common mode filter for USB3.0 interface Datasheet - production data Save components count Make the application robust against ESD strikes from external environment Description µqfn-6l 1.7
ESDA8P80-1U1M. High power transient voltage suppressor. Description. Features. Applications
High power transient voltage suppressor Description Datasheet - production data The ESDA8P80-1U1M is a unidirectional single line TVS diode designed to protect the power line against EOS and ESD transients.
ESDA7P120-1U1M. High power transient voltage suppressor
SDA7P120-1U1M High power transient voltage suppressor Datasheet - production data Pin2 Pin1 Applications Where transient overvoltage protection in SD sensitive equipment is required, such as: Smartphones,
ECMF04-4HSWM10. Common-mode filter with ESD protection. Features. Applications. Description. Complies with the following standards:
Common-mode filter with ESD protection Features Datasheet - production data µqfn-10l 2.60 x 1.35 mm Figure 1. Pin configuration (top view) Very large differential bandwidth to comply with HDMI 2.0, USB3.0,
EMIF M8. 4-line IPAD low capacitance EMI filter and ESD protection in micro QFN package. Features. Applications. Description
4-line IPAD low capacitance EMI filter and ESD protection in micro QFN package Features EMI symmetrical (I/O) low-pass filter High efficiency in EMI filtering: -34 db at frequencies from 900 MHz to 1.8
EMIF M16. 8-line IPAD low capacitance EMI filter and ESD protection in micro QFN package. Features. Description.
8-line IPAD low capacitance EMI filter and ESD protection in micro QFN package Features EMI (I/O) low-pass filter High efficiency in EMI filtering: Greater than 30 db attenuation at frequencies from 900
Obsolete Product(s) - Obsolete Product(s)
2-line IPAD, EMI filter and ESD protection for speaker Figure 1. Pin configuration (top view) and basic cell configuration Input SPK R in GND SPK L in 1 Pin 1 Micro QFN 6 leads 1.45 mm x 1.00 mm (bottom
Automotive dual-line Transil, transient voltage suppressor (TVS) for CAN bus. Description
Automotive dual-line Transil, transient voltage suppressor (TVS) for CAN bus Datasheet - production data Features 3 2 1 SOT323-3L AEC-Q101 qualified Dual-line ESD and EOS protection Stand-off voltage compatible
EMIF M6. 2 line IPAD, EMI filter and ESD protection in Micro QFN package. Features. Applications. Description. Complies with following standards
2 line IPAD, EMI filter and ESD protection in Micro QFN package Features Dual line EMI symmetrical (I/O) low-pass filter High efficiency in EMI filtering Very low PCB space consumption: 1.0 mm x 1.45 mm
EMIF03-SIM02M8. 3 line IPAD, EMI filter for SIM card applications. Features. Applications. Description. Complies with following standards
3 line IPAD, EMI filter for SIM card applications Features SIM card EMI low-pass filter High efficiency in EMI filtering Very low PCB space consumption: 1.7 mm x 1.5 mm Very thin package: 0.6 mm max High
EMIF06-HSD04F3. 6-line low capacitance IPAD for micro-sd card with EMI filtering and ESD protection. Features. Application.
6-line low capacitance IPAD for micro-sd card with EMI filtering and ESD protection Features Datasheet production data Figure 1. Pin configuration (bump side) Very low line capacitance to compensate long
EMIF06-USD14F3. 6-line low capacitance IPAD for micro-sd card with EMI filtering and ESD protection. Applications. Description. Features.
6-line low capacitance IPAD for micro-sd card with EMI filtering and ESD protection Applications Datasheet production data Flip Chip (15 bumps) Consumer and computer electronics with micro-sd card such
EMIF03-SIM06F3. 3-line IPAD, EMI filter including ESD protection. Description. Features. Application. Complies with the following standards:
3-line IPAD, EMI filter including ESD protection Description Datasheet production data The EMIF03-SIM06F3 chip is a highly integrated audio filter device designed to suppress EMI/RFI noise in all systems
EMIF06-HMC02F2. 6-line IPAD, EMI filter including ESD protection. Description. Features. Applications. Complies with the following standards
6-line IPAD, EMI filter including ESD protection Description Datasheet - production data Features 6 lines low-pass-filter High efficiency in EMI filtering Very low PCB space consuming: < 4 mm² Lead-free
Digital still cameras Portable devices. Schematic circuit diagram. DAT3 pull -up. DAT2_In. DAT3_In. CMD_In. CLK_In. DAT0_In.
6-line IPAD, EMI filter and ESD protection Features High design flexibility Lead free package Very low PCB space consumption: 3.5 mm x 1.2 mm Very thin package: 0.5 mm High efficiency in ESD suppression
EMIF02-SPK02F2. 2-line IPAD, EMI filter and ESD protection. Features. Application. Description. Complies with the following standards
2-line IPAD, EMI filter and ESD protection Datasheet production data Features Packaged in lead-free Flip Chip Very low resistance: 0.35 Ω High attenuation: -45 db at 900 MHz Very low PCB space consumption:
DALC208SC6Y. Automotive low capacitance diode array for ESD protection. Features. Description. Applications. Benefits
Automotive low capacitance diode array for ESD protection Datasheet production data Features Protection of 4 lines Peak reverse voltage: V RRM = 9 V per diode Very low capacitance per diode: C < 5 pf Very
ECMF02-3F3. Common mode filter with ESD protection. Features. Description. Applications. Complies with the following standard:
Common mode filter with ESD protection Datasheet production data Figure 1. Pin configuration (bump side) 1 2 A B Flip Chip 6 bumps C Features Figure 2. Schematic (bump side) Very large differential bandwidth
EMIF01-SMIC01F2 IPAD. Single line EMI filter including ESD protection. Main application. Description. Benefits. Pin configuration (Bump side view)
IPAD Single line EMI filter including ESD protection Main application Single ended microphone in mobile phones and portable devices Description The is a highly integrated device designed to suppress EMI/RFI
Obsolete Product(s) - Obsolete Product(s)
8 line low capacitance EMI filter and ESD protection Main product characteristics Where EMI filtering in ESD sensitive equipment is required: LCD and camera for mobile phones Computers and printers Communication
EMIF02-MIC01F2 2-line IPAD, EMI filter including ESD protection Features Application Description Complies with the standards:
2-line IPAD, EMI filter including ESD protection Features 2-line symetrical low-pass filter Lead-free package High-density capacitor High-efficiency EMI filtering Very small PCB footprint: 1.42 mm x 1.92
SOT23-6L ESDALCL6-2SC6
Very low capacitance and low leakage current ESD protection Features 2 data-line protection Datasheet production data Protects V BUS Very low capacitance: 2.5 pf typ. Very low leakage current: 10 na at
ESDA25LY Automotive dual Transil array for ESD protection Features Applications Description Benefits
Automotive dual Transil array for ESD protection Features 2 Unidirectional Transil functions Low leakage current: 1 µa @ 24 V 300 W peak pulse power (8/20 µs) Benefits High ESD protection level: up to
SMP75. Trisil for telecom equipment protection. Features. Description. Applications. Benefits
Trisil for telecom equipment protection Features bidirectional crowbar protection voltage: 8 V low leakage current: I R = 2 µa max holding current: I H = 15 ma min repetitive peak pulse current: I PP =
PESD5V0U2BT. 1. Product profile. Ultra low capacitance bidirectional double ESD protection diode. 1.1 General description. 1.
Ultra low capacitance bidirectional double ESD protection diode Rev. 01 27 March 2007 Product data sheet 1. Product profile 1.1 General description Ultra low capacitance bidirectional double ElectroStatic
PESD5V0U1BA; PESD5V0U1BB; PESD5V0U1BL
PESD5V0U1BA; PESD5V0U1BB; PESD5V0U1BL Rev. 01 25 April 2007 Product data sheet 1. Product profile 1.1 General description Ultra low capacitance bidirectional ElectroStatic Discharge (ESD) protection diodes
4-Line BUS-Port ESD Protection Array - Flow Through Design
-Line BUS-Port ESD Protection Array - Flow Through Design 22736 5 MARKING Pin 1 5F = type code = date code month YY = date code year DESIGN SUPPORT TOOLS click logo to get started Models Available 1 YY
DVIULC6-2x6. Ultra low capacitance ESD protection. Applications. Features. Description. Complies with these standards. Benefits
Ultra low capacitance ESD protection Datasheet - production data Low leakage current for longer operation of battery powered devices Higher reliability offered by monolithic integration 500 µm pitch for
PESD3V3L1UA; PESD3V3L1UB; PESD3V3L1UL
PESD3V3L1UA; PESD3V3L1UB; PESD3V3L1UL Rev. 01 17 June 2009 Product data sheet 1. Product profile 1.1 General description Low capacitance unidirectional ElectroStatic Discharge (ESD) protection diodes in
RClamp7524T. Low Capacitance RClamp 4-Line ESD Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.
Low Capacitance RClamp 4-Line ESD Protection PROTECTION PRODUCTS Description RailClamp TVS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series
RClamp3346P. Low Capacitance RClamp 6-Line ESD Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.
Low Capacitance RClamp 6-Line ESD Protection PROTECTION PRODUCTS Description The RClamp provides ESD protection for highspeed data interfaces. It features a high maximum ESD withstand voltage of ±17kV
Ultra Low Capacitance Bidirectional Symmetrical (BiSy) Single Line ESD Protection Diode in LLP1006-2M
Ultra Low Capacitance Bidirectional Symmetrical (BiSy) Single Line ESD Protection Diode in LLP6-2M 1 2 21129 MARKING (example only) XY Bar = pin 1 marking X = date code Y = type code (see table below)
ESDA6V1-4BC6 QUAD BIDIRECTIONAL TRANSIL SUPPRESSOR FOR ESD PROTECTION ASD
ASD ESDA6V1-4BC6 QUAD BIDIRECTIONAL TRANSIL SUPPRESSOR FOR ESD PROTECTION MAIN APPLICATIONS Where transient overvoltage protection in ESD sensitive equipment is required, such as: Computers Printers Communication
ESDAxxSCx. Quad Transil array for ESD protection. Features. Applications. Description. Benefits. Complies with the following standards:
Quad Transil array for ESD protection Features 4 unidirectional Transil Functions Low leakage current: I R max. < 20 µa at V RM 400 W peak pulse power (8/20 µs) Benefits High ESD protection level: up to
RClamp5011ZA. Ultra Small RClamp 1-Line, 5V ESD Protection. PROTECTION PRODUCTS - RailClamp Description. Features. Mechanical Characteristics
- RailClamp Description RClamp TVS diodes are designed to protect sensitive electronics from damage or latch-up due to ESD. They are designed to replace 21 size multilayer varistors (MLVs) in portable
PESD5V0C1USF. in portable electronics, communication, consumer and computing devices.
6 May 215 Product data sheet 1. General description Ultra low capacitance unirectional ElectroStatic Discharge (ESD) protection diode, part of the TrEOS Protection family. This device is housed in a DSN63-2
Low Capacitance, Single-Line ESD Protection Diode
VBUS51BD-HD1 Low Capacitance, Single-Line ESD Protection Diode 1 MARKING (example only) 856 XY Bar = cathode marking Y = type code (see table below) X = date code 111 855 DESIGN SUPPORT TOOLS click logo
RClamp3331ZA. Ultra Small RailClamp 1-Line, 3.3V ESD Protection
- RailClamp Description RailClamp TVS diodes are ultra low capacitance devices designed to protect sensitive electronics from damage or latch-up due to ESD, EFT, and EOS. They are designed for use on high
PUSB3FA0. 1 Product profile. ESD protection for ultra high-speed interfaces. 1.1 General description. 1.2 Features and benefits. 1.
Rev. 1 1 February 2018 Product data sheet 1 Product profile 1.1 General description The device is designed to protect high-speed interfaces such as SuperSpeed USB, High-Definition Multimedia Interface
USBLC6-4. Very low capacitance ESD protection. Applications. Features. Description. Complies with the following standards.
Very low capacitance ESD protection Datasheet - production data SOT23-6L Figure 1. Functional agram I/O1 1 6 I/O4 2 5 VBUS Low leakage current for longer operation of battery powered devices Fast response
Bidirectional Symmetrical (BiSy) Single Line ESD Protection Diode in LLP1006-2M
Bidirectional Symmetrical (BiSy) Single Line ESD Protection Diode in LLP-M 1 119 MARKING (example only) XY Bar = pin 1 marking X = date code Y = type code (see table below) DESIGN SUPPORT TOOLS Models
In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.
Important notice Dear Customer, On 7 February 2017 the former NXP Standard Product business became a new company with the tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic
In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.
Important notice Dear Customer, On 7 February 2017 the former NXP Standard Product business became a new company with the tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic
PRTR5V0U2X Ultra low capacitance double rail-to-rail ESD protection diode Rev January 2008 Product data sheet
Rev. 02 14 January 2008 Product data sheet 1. Product profile 1.1 General description Ultra low capacitance rail-to-rail ElectroStatic Discharge (ESD) protection diode in a small SOT143B Surface-Mounted
AOZ8809ADI. Ultra-Low Capacitance TVS Diode. Features. General Description. Applications. Typical Applications
Ultra-Low Capacitance TVS Diode General Description The AOZ889ADI is a transient voltage suppressor array designed to protect high speed data lines such as HDMI 1.4/2., USB 3./3.1, MDDI, SATA, and Gigabit
PESD5V0L1BSF. Ultra low profile bidirectional low capacitance ESD protection diode
Ultra low profile bidirectional low capacitance ESD protection diode Rev. 1 18 February 2011 Product data sheet 1. Product profile 1.1 General description Low capacitance bidirectional ElectroStatic Discharge
In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.
Important notice Dear Customer, On 7 February 2017 the former NXP Standard Product business became a new company with the tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic
PESD18VV1BBSF. Very symmetrical bidirectional ESD protection diode
Rev. 1 2 December 217 Product data sheet 1 Product profile 1.1 General description Very symmetrical bidirectional ElectroStatic Discharge (ESD) protection diode. This device is housed in a DSN63-2 (SOD962)
Specification Status: RELEASED
PAGE NO.: PAGE 1 of 6 Specification Status: RELEASED BENEFITS Industry-leading lowest capacitance; provides lowest insertion loss for high speed data signals Industry s smallest footprint and lowest profile
In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.
Important notice Dear Customer, On 7 February 2017 the former NXP Standard Product business became a new company with the tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic
In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.
Important notice Dear Customer, On 7 February 2017 the former NXP Standard Product business became a new company with the tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic
PESD3V6Z1BCSF. 1. General description. 2. Features and benefits. 3. Applications. 4. Quick reference data
Extremely low capacitance bidirectional ESD protection diode 25 May 218 Objective data sheet 1. General description Extremely low capacitance bidirectional ElectroStatic Discharge (ESD) protection diode,
PESD24VF1BSF. Table 1. Quick reference data Symbol Parameter Conditions Min Typ Max Unit C d diode capacitance f = 1 MHz; V R = 0 V
11 December 2015 Product data sheet 1. General description Ultra low capacitance bidirectional ElectroStatic Discharge (ESD) protection diode in a DSN0603-2 (SOD962-2) leadless ultra small Surface-Mounted
PESD18VF1BL. 1. General description. 2. Features and benefits. 3. Applications. 4. Quick reference data. 5. Pinning information
10 July 2018 Product data sheet 1. General description Ultra low capacitance bidirectional ElectroStatic Discharge (ESD) protection diode in a DFN1006-2 (SOD882) leadless ultra small Surface-Mounted Device
PESDxU1UT series. 1. Product profile. Ultra low capacitance ESD protection diode in SOT23 package. 1.1 General description. 1.
Rev. 01 11 May 2005 Product data sheet 1. Product profile 1.1 General description Ultra low capacitance ElectroStatic Discharge (ESD) protection diode in a SOT23 (TO-236AB) small SMD plastic package designed
Bidirectional ESD protection diode
11 December 2018 Preliminary data sheet 1. General description 2. Features and benefits 3. Applications 4. Quick reference data Ultra low capacitance bidirectional ElectroStatic Discharge (ESD) protection
RClamp0582B. Low Capacitance RClamp ESD and EOS Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.
RClamp582B Low Capacitance RClamp ESD and EOS Protection PROTECTION PRODUCTS Description The RClamp 582B transient voltage suppressor is specifically designed to protect sensitive components which are
AOZ8101. Ultra-Low Capacitance TVS Diode Array. General Description. Features. Applications. Typical Application
Ultra-Low Capacitance TS Diode Array General Description The AOZ8101 is a transient voltage suppressor array designed to protect high speed data lines from Electro Static Discharge (ESD) and lightning.
PESD5V0X2UM. 1. General description. 2. Features and benefits. 3. Applications. 4. Quick reference data
Ultra low capacitance unidirectional double ESD protection diode 3 February 2014 Product data sheet 1. General description Ultra low capacitance unidirectional double ElectroStatic Discharge (ESD) protection
4-Line BUS-Port ESD Protection
4-Line BUS-Port ESD Protection 5 4 6 2 3 2897 MARKING (example only) 2896 XY Dot = pin marking X = date code Y = type code (see table below) 2932 FEATURES Ultra compact LLP-6M package Low package height
PART OBSOLETE NO ALTERNATE PART. Features W-WLB Bottom View
2 CHANNEL LOW CAPACITANCE TVS DIODE ARRAY Product Summary V BR (min I PP (max C T (typ 6V 7.5A.8pF Description The is a high-performance device suitable for protecting two high speed I/Os. These devices
SMP30. Trisil for telecom equipment protection. Features. Applications. Description. Benefits
SMP3 Trisil for telecom equipment protection Features Bidirectional crowbar protection Voltage range from 62 V to 27 V Low capacitance from 1 pf to 2 pf typ.@ 5 V Low leakage current: I R = 2 µa max. Holding
Bidirectional Symmetrical (BiSy) Low Capacitance, Single-Line ESD Protection Diode in LLP1006-2M
VBUS5L1-DD1 Bidirectional Symmetrical (BiSy) Low Capacitance, Single-Line ESD Protection Diode in LLP16-2M 1 2 21129 MARKING (example only) XY Bar = pin 1 marking X = date code Y = type code (see table
Bidirectional Symmetrical (BiSy) Single Line ESD Protection Diode in LLP1006-2L
VCUT7B1-HD1 Bidirectional Symmetrical (BiSy) Single Line ESD Protection Diode in LLP16-2L 1 2 21129 MARKING (example only) XY Bar = pin 1 marking X = date code Y = type code (see table below) 21121 2855
Unidirectional ESD protection diode
Rev. 1 5 March 2012 Product data sheet 1. Product profile 1.1 General description Unidirectional ElectroStatic Discharge (ESD) protection diode in a leadless ultra small SOD882 Surface-Mounted Device (SMD)
4-Line BUS-Port ESD-Protection - Flow Through Design VBUS054CD-FHI VBUS054CD-FHI-GS
4-Line BUS-Port ESD-Protection - Flow Through Design Features Compact LLP2513-11L package Low package height
Femtofarad bidirectional ESD protection diode
Rev. 3 24 October 2011 Product data sheet 1. Product profile 1.1 General description Femtofarad bidirectional ElectroStatic Discharge (ESD) protection diode in a leadless ultra small SOD882 Surface-Mounted
STF701. T-Filter with TVS Diode Array For EMI Filtering and ESD Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Description The STF701 is a low pass T-filter with integrated TVS diodes. It is designed to provide bi-directional filtering of unwanted EMI/RFI signals and electrostatic discharge (ESD) protection in
ESD Protection Diode in LLP1006-2L
VESD5A1B-HD1 ESD Protection Diode in LLP16-2L 2855 MARKING (example only) XY Bar = cathode marking X = date code Y = type code (see table below) 2 1 21121 2856 DESIGN SUPPORT TOOLS click logo to get started
±15 kv ESD protected 3 to 5.5 V, 400 kbps, RS-232 transceiver with auto power-down
±15 kv ESD protected 3 to 5.5 V, 400 kbps, RS-232 transceiver with auto power-down Datasheet - production data Features ESD protection for RS-232 I/O pins: ±8 kv IEC 1000-4-2 contact discharge ±15 kv human
ESD Protection Diode in LLP1006-2L
VESD3A1C-HD1 ESD Protection Diode in LLP16-2L 2 1 2856 MARKING (example only) XY Bar = cathode marking X = date code Y = type code (see table below) DESIGN SUPPORT TOOLS Models Available 21121 click logo
X-NUCLEO-53L0A1. Ranging and gesture detection sensor expansion board based on VL53L0X for STM32 Nucleo. Description. Features
Ranging and gesture detection sensor expansion board based on VL53L0X for STM32 Nucleo Description Data brief Features VL53L0X ranging and gesture detection sensor module. Accurate absolute ranging distance,
In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.
Important notice Dear Customer, On 7 February 2017 the former NXP Standard Product business became a new company with the tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic
2-Line BUS-Port ESD Protection - Flow Through Design FEATURES VBUS052CD-FAH VBUS052CD-FAH-GS MOLDING COMPOUND FLAMMABILITY RATING
VBUS52CD-FAH 2-Line BUS-Port ESD Protection - Flow Through Design 21325 NC NC 6 5 4 MARKING (example only) 21323 Dot = pin 1 marking Y = type code (see table below) XX = date code 1 2 3 YXX 219 DESIGN
USB-OTG BUS-Port ESD Protection for V BUS = 12 V
USB-OTG BUS-Port ESD Protection for V BUS = 12 V 6 5 4 1 2 3 MARKING (example only) 2517 Dot = pin 1 marking XX = date code YY = type code (see table below) 7 2112 XX YY DESIGN SUPPORT TOOLS click logo
4-Line BUS-Port ESD Protection
4-Line BUS-Port ESD Protection 2397 6 5 4 1 2 3 MARKING (example only) Dot = pin 1 marking XX = date code YY = type code (see table below) 2453 1 XX YY DESIGN SUPPORT TOOLS click logo to get started Models
SP5001 Series 4 Channel TVS Common Mode Filter
Low Capacitance ESD Protection - SP51 Series SP51 Series 4 Channel TVS Common Mode Filter RoHS Pb GREEN Description The SP51 Series is a highly integrated Common Mode Filter (CMF providing both ESD protection
RClamp7528T. Ultra Low Capacitance TVS Array. PRELIMINARY Features. PROTECTION PRODUCTS - RailClamp Description. Mechanical Characteristics
- RailClamp Description RailClamp TVS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive
EMI4184. Common Mode Filter with ESD Protection
Common Mode Filter with ESD Protection Functional Description The EMI4184 is an integrated common mode filter providing both ESD protection and EMI filtering for high speed digital serial interfaces such
ESD7002, SZESD7002. Transient Voltage Suppressors. Low Capacitance ESD Protection Diode for High Speed Data Line
ESD72, SZESD72 Transient Voltage Suppressors Low Capacitance ESD Protection Diode for High Speed Data Line The ESD72 transient voltage suppressor is designed to protect high speed data lines from ESD.
RClamp3328P. Low Capacitance RClamp. 8-Line Protection PRELIMINARY
PROTECTION PRODUCTS - RailClamp Description The RClamp provides low voltage ESD protection for high-speed ports. It features a high maximum ESD withstand voltage of ±25kV contact and ±3kV air discharge
Headset/Speaker EMI Filter with ESD Protection CM1416/D. Features. Product Description. Applications. ±30kV ESD protection on each channel per
Headset/Speaker EMI Filter with ESD Protection CM1416 Features Functionally and pin compatible with the CSPEMI201A and CM1411 OptiGuard coated for improved reliability at assembly Two channels of EMI filtering
5-Line ESD Protection Diode Array in LLP75-6L
-Line ESD Protection Diode Array in LLP7-6L 6 996 MARKING (example only) 997 XX YY Dot = pin marking XX = date code YY = type code (see table below) DESIGN SUPPORT TOOLS Models Available click logo to
In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.
Important notice Dear Customer, On 7 February 2017 the former NXP Standard Product business became a new company with the tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic
UMDSR05 UNITED MICRO DEVICE INC. Ultra Low Capacitance Series TVS. Description. SOT-143 Pin Configuration. Features. Mechanical Characteristics
Description Dual-rail clamp diodes are designed to provide ESD protection for high speed data interfaces. They are ideal for protecting systems with high data and clock rates or for circuits requiring
Specification Status: RELEASED
PAGE NO.: 1 OF 6 Specification Status: RELEASED BENEFITS Low capacitance; provides low insertion loss for high speed data signals Small size ESD protection diodes for high speed data signals (0201 size
4-Line BUS-Port ESD Protection
4-Line BUS-Port ESD Protection 2397 6 5 4 1 2 3 MARKING (example only) XX YY Dot = pin 1 marking XX = date code YY = type code (see table below) 2453 1 DESIGN SUPPORT TOOLS click logo to get started Models
2-Line BUS-Port ESD-Protection - Flow Through Design FEATURES VBUS052CD-FAH VBUS052CD-FAH-GS MOLDING COMPOUND FLAMMABILITY RATING
2-Line BUS-Port ESD-Protection - Flow Through Design 21325 NC NC 6 5 4 MARKING (example only) 21323 Dot = pin 1 marking Y = type code (see table below) XX = date code 1 2 3 YXX 219 FEATURES Compact LLP113-L