Precision. Introduction...i. Precision Units. 4-inch Wide inch Wide Interlocking Fence Units Scored Caps & Fence Units...
|
|
- Delilah Brooks
- 5 years ago
- Views:
Transcription
1 Precision Introduction...i Precision Units 4-inch Wide inch Wide... 2 Interlocking Fence Units... 4 Scored Caps & Fence Units inch Wide inch Wide inch Wide inch & Pilasters º, Y-Block, & Miter Radius Caps Screen Units...17 Sill Block & Combed Face Angelus Block Co., Inc. The information herein is true and correct to the best of our knowledge but is subject to amendment or correction at any time, without notice. Angelus Block Co., Inc. does not assume responsibility or liability, including liability for negligence, for errors or omissions in this information or in its use in the preparations of architectural or engineering plans or specifications.
2 Precision Description Precision units are smooth-faced, straight-edged cmu, the common or basic block type. Its texture is the as-molded finish produced by vibration during manufacture. Precision units offer the most utility and versatility as reflected in the wide range of available units. Sizes of precision units are expressed in terms of nominal dimensions and compensate for a standard 3/8 inch mortar joint. That is, an is actually x x inches, with permissible variation in overall dimensions (width, height, length) of ± 1/8 inch. s All precision units manufactured by Angelus Block are hollow or solid loadbearing CMU in accordance with ASTM C90. Availability, or stock, items include a variety of widths in three weights. Normalweight is stocked in gray and a variety of colors in typical site wall sizes. Mediumweight is stocked in gray and a color in a tan range. Lightweight is stocked in gray only. Units shown in this section are generally available except as noted. Special order items are in addition to normal stock and are listed as Special Order Only. Such units require manufacturing lead times. Most precision units may be burnished or shotblast on special order. Please see the Burnished CMU and Shotblast CMU Sections. High-Stress units with compressive strengths of 2,500 to 3,750 net psi are available, generally obtained on special order. However, a limited inventory may be available; verify with your representative. Colors. A broad selection of special order colors is available. Contact your representative for color references and materials, or visit Colors & Textures at For any special order, whether for configuration or color, please contact your Angelus Block representative for specific information. Specification Please see the Guide Specifications at Precision - i
3 4 wide 4 high 8 high x 4 x 16 * 4 x 4 x 18 4 x 8 x 16 4 x 8 x 18 4 x 4 x 12 Corner 4 x 4 x 9 4 x 8 x 12 Corner 4 x 8 x 9 4 x 4 x 8 4 x 8 x 8 * Pilasters for 4 inch wide units Use with 4 inch wide units in fence wall applications H-Pilaster* A-Pilaster* Balboa H-Pilaster Balboa Open End (Balboa A) * Limited inventory - verify availability Precision - 1
4 6 wide 4 high 6 high ALL 11 5/8 1 6 x 4 x 12 6 x 4 x 16 6 x 4 x 18 6 x 6 x 16 6 x 4 x 6 6 x 4 x 14 Corner 6 x 4 x 15 Corner 6 x 6 x 8 6 x 4 x 8 6 x 4 x 9 Precision - 2
5 6 wide 8 high 1 Double Open End * Speed Block 6 x 8 x 18 1 in. Radius Open End * 6 x 8 x 14 Corner Single Bullnose 6 x 8 x 15 Corner 6 x 8 x 8 Double Bullnose 6 x 8 x 9 Open End * 6 x 8 x 8 * Limited inventory - verify availability Note: Open Ends and channels as shown are representational; actual configurations may differ. Precision - 3
6 Interlocking Fence Units 4 wide 6 wide 8 wide ALL x 8 x 18 Catalina 2 6 x 8 x 18 Catalina 6 x 8 x 18 Stucco Block* Tongue & Groove Beveled Ends 4 x 8 x 9 Catalina (Breakaway) 6 x 8 x 9 Catalina 6 x 8 x 9 Stucco Block Mixed Male and Female 8 x 8 x 8 T & G Beveled End Mixed Male and Female 4 x 8 x 16 Tongue & Groove Beveled Ends Tongue & Groove Beveled Ends Tongue & Groove with Reveal Note: This unit is used for Proto II Wall System lot separation walls. 6 x 8 x 8 T & G Beveled End * Mixed Male and Female 6 x 8 x 8 Tongue & Groove with Reveal Precision - 4 * Limited inventory - verify availability
7 Scored Caps & Fence Units 4 wide 6 wide 8 wide 4 x 8 x 18 Balboa* Balboa* 6 x 8 x 18 Balboa Open Top Balboa 4 x 8 x 18 Open Top Balboa Open Top Balboa 6 x 8 x 18 Open Top Balboa Balboa Open End (Balboa A) Tongue & Groove 11-Score Cap* Balboa H-Pilaster Score Dimensions for Balboa Units Note: Balboa A and H- Pilaster for use with 4-in. wide units in fence wall applications 1/4 3/8 1 3/16 Score Dimensions for 16-inch Long Units 1/4 3/8 1 3/8 Score Dimensions for 18-inch Long Units * Limited inventory - verify availability Precision - 5
8 8 wide 2 high 6 high ALL 8 x 2 x 16 Note: This unit may have limited color availability. Please consult your Angelus Block representative. 8 x 6 x 16 8 x 6 x 16 Open End Actual height is 2 inches. 4 high 8 x 6 x 16 8 x 6 x 16 Open End 8 x 4 x 16 8 x 4 x 16 Open End 8 x 6 x 8 8 x 6 x 8 8 x 4 x 16 8 x 4 x 16 Open End 8 x 4 x 8 8 x 4 x 8 Note: Open Ends and channels as shown are representational; actual configurations may differ. Precision - 6
9 8 wide 8 high 1 in. Radius Double Open End Solid Bottom Single Bullnose Open End 8 x 8 x 8 Double Bullnose 8 x 8 x 8 Speed Block* 2 Open End No Center Web 8 x 8 x /2 3/4 4 Bond Beam 8 x 8 x 12 Sash * Limited inventory - verify availability 3/4 Note: Open Ends and channels as shown are representational; actual configurations may differ. Precision - 7
10 10 wide 4 high 8 high ALL LIMITED INVENTORY - VERIFY AVAILABILITY 9 5/8 10 x 4 x 16 Available in Open Ends and s Units 9 5/8 10 x 8 x x 8 x 16 Double O. E. 10 x 8 x 16 w/ 8 Offset Core 10 x 4 x 8 10 x 8 x 16 Open End 10 x 8 x 8 6 high ALL 10 x 8 x x 8 x 8 9 5/8 10 x 6 x 16 Available in Open Ends, Bond Beams and Double Open End s 10 x 8 x 16 Open End 2 3/8 10 x 6 x 8 5 3/4 Sash Note: Open Ends and channels as shown are representational; actual configurations may differ. Precision /16 3/4
11 12 wide 4 high 6 high ALL 11 5/8 11 5/8 12 x 4 x x 4 x 8 12 x 6 x x 6 x 16 Double Open End 12 x 4 x 16 Open End 12 x 4 x 8 12 x 6 x 16 Open End 12 x 6 x 8 12 x 4 x x 6 x x 6 x 8 12 x 4 x 16 Open End 12 x 6 x 16 Open End Note: Open Ends and channels as shown are representational; actual configurations may differ. Precision - 9
12 12 wide 8 high 11 5/8 1 in. Radius Double O. E. Single Bullnose Open End Solid Bottom Speed Block Double Bullnose 12 x 8 x 8 Grout Lock 8-Inch Offset Core* Open End 12 x 8 x 8 2 1/2 10-Inch Offset Core* 6 1/2 *Offset Core units may be available in other configurations. 3/4 Sash 3 7/16 3/4 Precision - 10 Note: Open Ends and channels as shown are representational; actual configurations may differ.
13 16 Wide & Pilasters 16 wide Columns/Pilasters In-Wall Pilasters ALL 11 5/8 16 x 8 x 6 C-Alternate 1 Double O. E. 12 x 8 x 12 Ring 11 5/8 4 Banjo Pilaster 1 1 Ring 16 x 8 x 8 C-Alternate 11 5/8 1 Ring 2 24 x 8 x 12 C-Alternate 8 1 Banjo Pilaster 2 24 x 8 x 16 C-Alternate Precision - 11
14 45, Y-Block, & Miter ALL 10 11/ Y Block OE w/ KOBB Also available in 6 in. wide Chevron DOE BB Also available in 6 in. wide 7 7/ /8 Corner / Miter DOE BB Left and Right Also available in 6 in. wide Miter DOE BB Left and Right Also available in 6 in. wide Precision - 12
15 Miter Layouts Example Layouts of Y-Block 45 Chevron 22.5 Miter DOE BB 22.5 Miter DOE BB Y BLOCK DOE BB 45 Chevron DOE BB Alternate Course Y BLOCK Precision - 13
16 Radius ALL Note: All radius dimensions are to the outside. 8 in. r = 1 per 90 8 in. Radius Radius ends Radius cut ends from cut 8x8x16 unit. from 8x8x16 unit. 8 in. r = 1 per 90 Alternate Course Alternate Course 8 3/4 I.D. 18 1/2 1 ft. Radius Note: Note: Ends Ends of 1 of ft. 1. Radius Radius are are Knockout Knock-out s. s 18 1/2 2 ft. r = 2 per 90 2 ft. Radius * 2. r = 2 per 90 Alternate Course Alternate Course Precision - 14 * Limited inventory - verify availability
17 ALL Radius Note: All radius dimensions are to the outside. 14 1/2 4 ft. r = 5 per 90 4 ft. Radius Alternate Course 5 ft. 2 in. r = 6 per /16 5 ft. 2 in. Radius Alternate Course 6 ft. r = 7 per /4 6 ft. Radius Alternate Course Precision - 15
18 Caps 4 x 2 x 16 Cap 6 x 2 x 16 Cap 8 x 2 x 16 Cap 8 x 4 x 16 Solid 10 x 4 x 16 Solid 12 x 4 x 16 Solid 9 5/8 10 x 4 x 8 Mushroom Cap LIMITED INVENTORY 8 x 4 x 16 Beveled Cap Beveled Cap Beveled Cap Alternate Orientation 10 x 4 x 16 Beveled Cap 19 1/2 x 4 x 19 1/2 Beveled Pilaster Cap LIMITED INVENTORY Precision - 16
19 Screen Units The following units may be limited in inventory and / or stocking locations; verify availability. 4 x 12 x 12 View-Lite I 4 x 8 x 16 Vista 4 x 12 x 12 View-Lite IV 4 x 8 x 16 or 6 x 8 x 16 Grille-Lite 3 4 x 12 x 12 Empress 4 x 8 x 16 Pompeian 4 x 12 x 12 Maltese 4 x 8 x 16 or 6 x 8 x 16 Grille-Lite 6 4 x 12 x 12 Venetian Precision - 17
20 Sill Block & Combed Face 4 7/16 3 3/4 2 3/ /8 10 x 4 x 8 Sloped Sill Block [C] 10 x 4 x 8 Flat Top Sill Block [B] Combed Face Combed Face Precision - 18
4-inch Wide inch Wide inch Wide inch Wide inch Wide...5. Columns...6. Caps...7
Slumpstone Introduction...i Slumpstone Units 4-inch Wide... 1 6-inch Wide...2 8-inch Wide...3 10-inch Wide...4 12-inch Wide...5 Columns...6 Caps...7 2018 Angelus Block Co., Inc. The information herein
More informationWelcome to EP Henry s Shapes and Sizes Catalog
& Shapes & SIZES Welcome to EP Henry s Shapes and Sizes Catalog Profile CMU s are available in a wide variety of color and aggregate combinations. If you don t see a shape here, please contact your EP
More informationHardware & Accessories
Hardware & Accessories Assure that your installations and designs are completed in professional fashion by utilizing Stylmark s Hardware and Accessories. This catalog represents a collection of these items,
More information1700 SERIES WINDOW COLLECTION
ALSIDE NEW CONSTRUCTION 1700 SERIES WINDOW COLLECTION SIZE GUIDE TABLE OF CONTENTS 3 Specifications 4 Quick Spec Guide 5 Single-Hung Model 1700 14 Twin Single-Hung Model 1720 22 Triple Single-Hung Model
More informationSTRENX TUBE 100XF STRENX TUBE 100XF. General Product Description
STRENX TUBE 100XF STRENX TUBE 100XF General Product Description Advanced high-strength structural hollow sections Strenx Tube 100XF is an HF-welded cold-formed structural hollow section made of hot-rolled
More information2014 PRICE LIST AND INDEX
2014 PRICE LIST AND INDEX Masonry Products Effective March 1, 2014 Prices are valid throughout the Province of Ontario PRICE BOMBARDIER TRANSPORT ARCHITECT: PATRICE GAMACHE Standard Block 10 cm 1 cm 20
More informationBall Spline Types LT and LF
Ball Spline Types and LF Ball Spline nut Snap ring Seal Retainer Spline shaft Fig. Construction of Ball Spline Type Construction and Features Ball Spline types and LF have four or six trains of loadbearing
More informationInch / Cross Type Metric Section Style Material Page. Inch Deep Style 92 Durometer Urethane with 70 Durometer Nitrile Energizer
Hydraulic Seals Inch / Cross Type Metric Section Style Material Page Standard 92 Durometer Urethane 7-11 with 70 Durometer Nitrile Energizer Inch Deep Style 92 Durometer Urethane 12-16 with 70 Durometer
More informationComposite Push-In Fittings - NPTF/INCH
composite FITTINGS Composite Push-In Fittings - F/INCH Tube diameter: Ø /8", 5/32", /4", 5/6", 3/8", /2" Connections /8, /4, 3/8, /2 F These new models have been released in technopolymer, maintaining
More informationDETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-83503/24C 4 August 2010 SUPERSEDING MIL-DTL-83503/24C 21 July 2004 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, FLAT CABLE, NONENVIRONMENTAL FOUR WALL HEADER, RIGHT ANGLE (.100
More informationT502-T519 Miscellaneous Trims. 19th Century Casing Step. Band Mould or Astragal Flat. Novelty Mini-Mock Bevel. Window & Door Stop.
T502-T519 Miscellaneous s Stock Glass Bead T502 9/16 x 3/4 Window & Door Stop T503 9/16 x 1 Scribe & Shoe T504 3/8 x 7/8 Inside Corner T505 Outside Corner T507 Casing Step T510 1/2 x 3/4 STOCK T511 T512
More informationPicket Patterns. Overview
Ornamental Pro 2010 Rail Section and Picket Pattern Drawing Manual Table of Contents Picket Patterns... 1 Overview... 1 Creating a Picket Pattern... 2 Example 1... 2 Vertical Bar Behavior... 2 Example
More information90 Elbows Long Radius
90 Elbows Long Radius DN O.D. Center SCH STD SCH XS SCH XXS SCH 10 SCH 20 SCH 30 SCH 40 SCH 60 SCH 80 SCH 100 SCH 120 SCH 160 Inch mm to End Thickness Weight Thickness Weight Thickness Weight Thickness
More informationSECTION [13200] FRAMED 2000 CLEANROOM WALL SYSTEM
SECTION [13200] FRAMED 2000 CLEANROOM WALL SYSTEM SECTION 1 GENERAL 1.01 SECTION INCLUDES A. This Section specifies all requirements necessary to furnish and install a complete framed modular cleanroom
More information2018 Moulding Catalogue. Design & Decorate with Architectural Trim & Moulding
2018 Moulding Catalogue Design Decorate with Architectural Trim Moulding 220 Wellington St. East Aurora ON L4G 1J5 905-727-1387 Toll Free: 1-866-816-8703 Fax: 905-727-1050 www.royalwoodshop.com Hours of
More informationQUAD 1000 OWNERS MANUAL OPERATION GUIDE
QUAD 1000 OWNERS MANUAL OPERATION GUIDE Built in Redmond Oregon USA COMPONENTS 4001-0000 Quad 1000 5 arc second zenith laser featuring electronic servo self-leveling with variable temperature compensation
More informationVOLTERRA HDF PRODUCTS
VOLTERRA HDF PRODUCTS Table of Contents COLUMNS 4 SMOOTH CORBELS 7 ROUGH SAWN CORBELS 8 ROUGH SAWN L HEADERS 10 ROUGH SAWN BEAMS 14 TRUSS TAILS 19 TILE VENTS 20 WINDOW SILLS/ DOOR TRIM 22 BRACKETS 25 MISCELLANEOUS
More informationPVC DWV Drain Waste Vent Fittings
DWV Standards PVC DWV Drain Waste Vent Fittings TECICA IFORMATIO Contact Spears for any information not found. Page 983 Suitable for low pressure air handling 5 psi, not for distribution of compressed
More informationNon-Drip Quick Connect Couplings
Non-Drip Quick Connect Couplings Modular constructions offering just the right coupling for every fluid application ^ Innovative Products for Demanding Applications Innovative Couplings for Fluid Applications
More informationFinial Reference Charts
A P P E N D I X Appendix Finial Reference Charts Finial Dimensions BUCKINGHAM For use with 1 3 8" and 2" poles: CWB101 Starlight 4 3 4" 3 1 2" 3 1 2" CWB102 Lantern in Leather 5 1 2" 3 3 4" 3 3 4" CWB103
More informationDrawing. Chapter 11. Bridge. A. Insert Views. Step 1. Click File Menu > New, click Drawing and OK. on the View Layout toolbar.
Chapter 11 Bridge Drawing A. Insert Views. Step 1. Click File Menu > New, click Drawing and OK. Step 2. Click Model View on the View Layout toolbar. Step 3. Click Browse in the Property Manager. Step 4.
More informationShutter Design. Standard Shutters
Shutter Design Revised: DEC. 2017 Standard Shutters Sunland Shutters builds all panels so that the top rail and the bottom rail are as close to the same size as possible. When ordering adjacent shutters
More informationTECH FACTS WELDED WIRE REINFORCEMENT FOR CIRCULAR CONCRETE PIPE. Excellence Set in Concrete.
TECH FACTS TF 306-R-10 Excellence Set in WIRE REINFORCEMENT INSTITUTE 942 Main Street Suite 300 Hartford, CT 06103 (800) 552-4WRI [4974] WELDED WIRE REINFORCEMENT FOR CIRCULAR CONCRETE PIPE pipe producers
More informationVirtually Maintenance Free Vinyl Railing
by Polyrail Systems ICC-ES ESR-1324 Complies with 2003 ibc & 2003 irc Virtually Maintenance Free Vinyl Railing Step ONE LXT Posts, Sleeves & Mounts... Page Adjustable Aluminum Post Mount... 3 Railing Post
More informationSurface Area and Volume
14 CHAPTER Surface Area and Volume Lesson 14.1 Building Solids Using Unit Cubes How many unit cubes are used to build each solid? 1. unit cubes 2. unit cubes Extra Practice 5B 121 3. unit cubes 4. 5. unit
More informationTILBURY STEEL SERVICE CENTRE
TILBURY STEEL SERVICE CENTRE 159 Queen Street North Tilbury, ON, N0P 2L0 Voice: 519-682-0000 Toll-Free: 1-800-565-1077 Fax: 519-682-0004 Email: tsales@tilburysteel.com STOCK BOOK & REFERENCE GUIDE Tilbury
More informationsq ** Ra
Laminate Tops specification example edge top option laminate edge color (for 4902 and 4903 edges only) 4903 36S-L Wilsonart 4623-60, graphite nebula black (09) edge width x 24R-L 32R-L 36R-L 48R-L 60R-L
More informationThe Flagstone Heritage
The Heritage Reconstituted stonework has been employed by architects and landscape designers for well over two hundred years. Its early history is distinguished with fine examples of craftsmanship still
More informationTECHNICAL GUIDE M LOEWEN MULTISLIDE
TECHNICAL GUIDE M LOEWEN MULTISLIDE LOEWEN MULTISLIDE LOEWEN MULTISLIDE STANDARD FEATURES Standard panel heights up to feet Standard panel widths up to 5 feet; custom sizes available Natural Douglas Fir
More informationKully Reference Book
Kully Reference Book Serving the Greater Mid-West since 1946 Angles Channels Beams Rounds Sheets Squares Flats Rebar Wire Mesh Black & Galvanized Pipe Anchor Bolts Plastic, Copper, Black, Galvanized Pipe
More informationSPECIFICATIONS GUIDE GRABER TRADITIONS SPECIALTY SHUTTERS SECTION 8
SPECIFICATIONS GUIDE GRABER TRADITIONS SPECIALTY SHUTTERS SECTION 8 April 2013 Café Shutters Available inside and outside mount. If using hang strip: hang strip will be same height as café panel. If using
More information-FOR 8 & LONGER - ADD 20%, FOR 10 & LONGER - ADD 30%, FOR 12 & LONGER - ADD 40%
CHERRY MOULDINGS SOLD IN RANDOM LENGTH 6 TO 16 -FOR 8 & LONGER - ADD 20%, FOR 10 & LONGER - ADD 30%, FOR 12 & LONGER - ADD 40% -SPECIFIED LENGTHS ARE SUBJECT TO AVAILABILITY Astragal (T) 7 CTA-1 3 / 8
More informationUnitary Construction Double Wall Piping System
Unitary Construction Double Wall Piping System 221 Page intentionally left blank 222 Co-Extruded Double Containment Chem Proline Black PE Resin Crack resistant proprietary resin formulation Excellent abrasion
More informationTrue Union PVC Ball Valves Industrial Grade, Full Port Design 1/2 to 4 inch Pipe
True Union PVC Ball Valves Industrial Grade, Full Port Design 1/2 to 4 inch Pipe SERIES Features Pressure rated 232 PSI (16 Bar) at 73 F (23 C) Full Port design for unrestricted flow Energized PTFE ball
More informationRatec Shuttering System from Experienced Professionals. Flexible, fast, secure and efficient.
Ratec Shuttering System from Experienced Professionals Flexible, fast, secure and efficient. RATEC Shuttering System. Unbeatable Co Can be used in manual or robot-handling systems RATEC shuttering systems
More informationRATHETING TAPS AND DIES SETS RATCHETING TAPS & DIES Pc. Ratcheting Tap and Die Set SAE
RATHETING TAPS AND DIES 82811-65 Pc. Ratcheting Tap and Die Set SAE 82800 Large Tap and Die Ratcheting T Wrench 82801 Large Locking Tap Adapter 82802 Large Hex Die Adapter 3881 Medium Tap and Die Ratcheting
More informationOrnamental Pro 2010 OP2010 Instruction Manual Table of Contents Objects... 3 Bar... 3 Description... 3 Creating New... 3 Creating a Curved Bar...
Ornamental Pro 2010 OP2010 Instruction Manual Table of Contents Objects... 3 Bar... 3... 3... 3 Creating a Curved Bar... 3... 4 Twisted Bar... 4 Mitering Two Bars... 4 Extend... 4 Band... 5... 5... 5...
More informationTable of Contents. 18 Column Wrap 20 Garage Door ThermoStop 22 Window & Door Trim 26 Mouldings 39 Reference
Product Directory 2 Table of Contents 3 4 S4S Trimboard 6 SurEdge Trimboard 8 Conceal Trim System 12 Precision Cut Trimboard 16 Sheet Board 17 Nickel Gap/Shiplap, Beadboard & Wainscoting 18 Column Wrap
More informationIRONRIDGE PRODUCT CATALOG
IRONRIDGE PRODUCT CATALOG Effective March 15, 2011 Product Catalog March 15, 2011 2 What s New: 1. New Products: a. End Caps for XRS and XRL Rails Page 6 b. End Clamps I, J, K, Page 7 and updated sizing
More informationstandard stock range Consistent approach Exclusively for Stockholders Premier collection service Comprehensive stock availability
Consistent approach Exclusively for Stockholders Premier collection service Comprehensive stock availability Stainless Steel, Aluminium, Copper and Brass Stockholder Sales tel: + (0) 2 2 200 fax: + (0)
More informationWILLIAMS & HUSSEY IN-STOCK KNIVES
WILLIAMS & HUSSEY IN-STOCK KNIVES Toll Free 800-28-80 60-72-029 0 State Route 0A, Unit 4 PO Box 08 Amherst, NH 00 www.williamsnhussey.com REFER TO PROFILE DIMENSIONS FOR TRUE SIZE. HELPFUL HINTS Bold lines
More informationFlexible LED strip - 24 VDC
Kurba dimensions Kurba Horizontal & W is a direct view, small profile, energy efficient and flexible LED strip suitable for wet locations capable of horizontal bends up to 2.5 radius. Built with robust
More informationConnections Catalog WIDEST SIZE RANGE ALL ALLOYS VAST INVENTORY QUICK TURNAROUND CAPABILITY AVL APPROVAL
Connections Catalog WIDEST SIZE RANGE ALL ALLOYS VAST INVENTORY QUICK TURNAROUND CAPABILITY AVL APPROVAL CUSTOM SOLUTIONS GLOBAL AVAILABILITY BROAD PRODUCTION CAPABILITY FULL PRODUCT TESTING About AFGlobal
More informationDuo-Pro Double Contained Piping Systems
PRO 150x150 Simultaneous Pipe Part Number 5210+(size code) (ft.) L2 (ft.) # Spider Clips 1 x 3 (134) 3.75 2.5 4 2 x 4 (420) 3.50 3.0 4 3 x 6 (531) 5.25 3.0 3 4 x 8 (583) 5.25 3.0 3 6 x 10 (627) 5.25 3.0
More informationwerkzeugtechnik WEIß WERKZEUGTECHNIK Special Form Cutters Special Tools for Medical Engineering Precision Milling Tools
werkzeugtechnik WEIß WERKZEUGTECHNIK Special Form Cutters Special Tools for Medical Engineering Precision Milling Tools Weiß Werkzeugtechnik. Uncompromising in form and profile! Highest precision, outstanding
More informationSection 1. Schedule 80 PVC Piping System. Pipe and Fittings Sizes ¼" to 16"
Section Schedule 80 PVC Piping System Pipe and Fittings s ¼" to 6" Effective September 27, 200 Glossary FP = Female Pipe hread MP = Male Pipe hread S = apered Socket SPG = Spigot End (same dimension as
More informationPVC DWV Drain Waste Vent Fittings
PVC DWV Drain Waste Vent Fittings TECICA IFORMATIO Visit our web site www.spearsmfg.com 1212 SPEARS IE OF QUAITY PVC DRAI, WASTE AD VET (DWV) FITTIS ARE MAUFACTURED I STRICT COMPIACE TO ASTM D 2665. STADARDS
More informationPEDESTAL MOUNTS SUPER STRONG MOUNTING SOLUTIONS FOR INSTALLATION OF HEAVIER DEVICES
PEDESTAL MOUNTS SUPER STRONG MOUNTING SOLUTIONS FOR INSTALLATION OF HEAVIER DEVICES PEDESTAL MOUNTS 4 HEAVY DUTY PEDESTAL MOUNTS WITH WINGNUTS 5 HEAVY DUTY PEDESTAL MOUNTS 6 HEAVY DUTY PEDESTAL MOUNTS
More informationCRL AWS - ALUMINUM WINDSCREEN SYSTEM TYPICAL PLANS & ELEVATIONS - RECTANGULAR POSTS
CRL AWS - ALUMINUM WINDSCREEN S & S - POSTS Revisions By: SURFACE APPLIED TOP CAP 7 (888 mm) SQ FT MAX PANEL SIZE FOR 8" (MAX 7) x ALUMINUM ATTACHMENT WILL DEPEND ON MOUNTING AND INSTALLATION LOCATION
More informationLNT-45RGB 4.4W IP67/IP68 COLOR-CHANGING LED STRIP
SPECIFICATION SHEET JOB NAME: LOCATION: QUOTE/REF#: LNT45 is a high performance flexible LED fixture designed as a neon replacement. Suitable for indoor and outdoor applications, the LNT45 easily bends
More informationFDM Lightweight Structures DESIGN GUIDE
FDM Lightweight Structures THE 3D PRINTING SOLUTIONS COMPANY FDM Lightweight Structures Many aerospace and automotive applications require parts with a very high stiffness-to-weight ratio. Because of the
More informationBricks'n'Tiles. Tutorial Creating a brick file and texturing a medieval tower. Easy Creation of Architectural Textures.
Bricks'n'Tiles Easy Creation of Architectural Textures www.bricksntiles.com Tutorial Creating a brick file and texturing a medieval tower 1 Introduction Welcome this this Bricks'n'Tiles Tutorial. Brick'n'Tiles
More information4SP/6SP Series. One Piece Bite-the-Wire Spiral Hose Ends. For use with H464, H470 and H485 Hose. Marketing Catalog
For use with 464, 470 and 485 ose Marketing Catalog One Piece Bite-the-Wire Spiral ose Ends 4SP/6SP Series ose Ends eavy wall thickness maintained 4-SPIR or 6-SPIR and hose size stenciled on socket Bite-the-Wire
More informationThe surface area of a solid figure is the sum of the areas of its surfaces. To help you see all the surfaces of a solid figure, you can use a net.
The surface area of a solid figure is the sum of the areas of its surfaces. To help you see all the surfaces of a solid figure, you can use a net. A net is the pattern made when the surface of a solid
More informationARTO. Fall 2015 PRICELIST. USE FALL Ceramic Price book for all ARTO Ceramic Pricing. Rustic Elegance Designed & Manufactured in California Since 1966
Fall 2015 PRICELIST ARTO USE FALL Ceramic Price book for all ARTO Ceramic Pricing Rustic Elegance Designed & Manufactured in California Since 1966 Table of Contents ARTILLO COLLECTION 2-7 Square and Rectangle
More informationTable of Contents. Genovations railing. Genovations decking. Manufacturer specifications. Merchandising aids. Product warranties
Table of Contents Genovations railing SQUARE RAILING 6'&8' 1 DELUXE SQUARE RAILING 6'&8' 2 SQUARE & DELUXE SQUARE RAILING 10' 3 COLONIAL RAILING 6'&8' 4 DELUXE GLASS RAILING 6'&8' 5 POST & POST ACCESSORIES
More informationRatec Shuttering System from Experienced Professionals Inserts & Insert Magnets
RATEC program Shuttering magnets Shuttering systems RATEC Battery System Technical changes reserved! www.bloesch-partner.de 4/13 Ratec Shuttering System from Experienced Professionals Inserts & Insert
More informationEarthbound Welded Anchor Calculations
Earthbound Welded Anchor Calculations Objective: Find a welded anchor to steel beam connection able to handle 1.125 inch diameter A193B7 Threaded. Calculate the welding requirements for welding a round
More informationNon-Drip Quick Connect Couplings Modular constructions offering just the right coupling for every fluid application. non-drip
Non-Drip Quick Connect Couplings Modular constructions offering just the right coupling for every fluid application non-drip 2 Innovative Products for Demanding Applications Innovative Couplings for Fluid
More information3D Modeling and Design Glossary - Beginner
3D Modeling and Design Glossary - Beginner Align: to place or arrange (things) in a straight line. To use the Align tool, select at least two objects by Shift left-clicking on them or by dragging a box
More informationCW INDUSTRIES IDC SELECTION GUIDE
CW INDUSTRIES IDC SELECTION GUIDE An ISO Company that Delivers World Class Quality About CW IDC Connectors CW mass terminated Insulation Displacement Connectors are specifically designed to provide a reliable
More informationSheet Metal Overview. Chapter. Chapter Objectives
Chapter 1 Sheet Metal Overview This chapter describes the terminology, design methods, and fundamental tools used in the design of sheet metal parts. Building upon these foundational elements of design,
More informationNT-2300 Series Dual Circuit Track System & Accessories
ILLUMINATING THE FUTURE...SINCE 1989 NT-2300 Series Dual Circuit Track System & Accessories Type Project Catalog No. Lamp/Wattage PRODUCT DESCRIPTION Low profile, extruded aluminum track with 20-Amp rated
More informationTerminal Accessory Guide
Terminal Accessory Guide Page 2.............................Carrying Cases Page 3..........................Mounting Brackets Page 4.............................Protective Boots Page 6-7............................
More informationTable of contents. What is new in Advance Steel 2014 WELCOME TO ADVANCE STEEL USER INTERFACE ENHANCEMENTS... 6 MODELING JOINTS...
Table of contents WELCOME TO ADVANCE STEEL 2014... 5 USER INTERFACE ENHANCEMENTS... 6 User interface 1: Customizable tool palette... 6 User interface 2: Collision check results... 7 User interface 3: Steel
More informationHow to Identify Fluid Ports and Connectors. A guide to North American, British, Japanese, German (DIN metric), and ISO connections
How to Identify Fluid Ports and Connectors A guide to North American, British, Japanese, German (DIN metric), and ISO connections How to measure threads Use a thread pitch gauge to determine the number
More informationRFA Door. Revit Content DOOR MANUAL. Copyright by Content & More Limited, All Rights reserved
DOOR MANUAL DOOR FEATURES OVERVIEW FRAME REBATES FRAME TYPES DOOR FLUSH SYMBOL LINES WOOD FRAME METAL FRAME SIDE LIGHTS & TRANSOM PANEL GLAZING DOUBLE PANEL DOOR ACCESSORIES DOOR TYPES VOID FOR ADDITIONAL
More informationTechnical Data Sheet Excel 741
Technical Data Sheet Excel 741 Excel 700 Series Features & Options Standard Features Manually-operated individual-panel movable partition STC 43, 48, 50, or 54 Steel faces laminated to gypsum board 102
More informationAir-Pro Blue Polyethylene (PE) Compressed Air Piping System
- Specification Blue Polyethylene (PE) Compressed Air Piping System REV:IN0512PE Materials: ASTM D3350 cell classification PE346544C or better. Resin shall comply with FDA Code of Federal Regulators (CFR),
More informationMultiTest 50 Tablet Hardness Tester
MultiTest 50 Tablet Hardness Tester Precisely measure up to 5 parameters Simple EasyTouchTM operation Fast multi-parameter measurement Robust design with minimal footprint Proven Dr. Schleuniger hardness
More informationContact or for more information.
Series C Elite BBF CATALOG Office in an Hour Easy Office Contact BBFSales@bushindustries.com or 800-964-1638 for more information. Easy What you need, without the hassle. We ll handle every detail, every
More informationNT-300 & NT-2300 Series Single & Dual Circuit Track System & Accessories
NT-300 & NT-2300 Series Single & Dual Circuit Track System & Accessories PRODUCT DESCRIPTION Low profile, extruded aluminum track with 20-Amp rated flat, solid integral conductors. Variety of connectors
More informationFeatured Products - RU Marking Standard on Hoffman brand
: Open Frame Racks CHAPTER Open frame racks are versatile solutions for mounting hubs, switches, routers and servers. Easy access to all sides simplifies maintenance and updates. Solidly constructed, Pentair
More informationE-Z Clip System End Connections & O-Rings
PPLICION E-Z Clip System End Connections & O-Rings ow to Identify O-Ring Pilot hread Sizes his connection is common to air conditioning systems, both in vehicle and commercial applications. Both the male
More informationCBT 100LA Constant Beamwidth Technology
CBT LA Constant Beamwidth Technology Line Array Column Loudspeaker with Sixteen 5 mm (2 in) Drivers Key Features: Patent-pending Constant Beamwidth Technology provides constant directivity up to the highest
More informationOZLINX Solutions Australia Pty Ltd 21 Ayton Street, Sunshine North, Melbourne VIC3020 Australia Ph: Fax:
OZLINX Solutions Australia Pty Ltd 21 Ayton Street, Sunshine North, Melbourne VIC3020 Australia Ph: +61 3 93102440 Fax: +61 3 93102441 www.ozlinx.com OZLINX Cabinets OZLINX Cabinets OZLINX cabinets combine
More informationNorth US 290 US 183. MLK Blvd. FM 969. ASERO Steel Sales. Ben White TX 71 IH-35 US 183
North US 290 US 8 MLK Blvd. FM 969 ASERO Steel Sales Ben White TX IH- US 8 Hot Rolled Strip Commercial Quality A - 0 Size in Per 20 Ft. /8 x /2.2 4.26 /4.9 6.8.42 8.0 /4. 0.62 /2.68 2.6 2.80.00 2 /2.06
More informationAS&D Railing System Overview ACTUAL FREIGHT CHARGES WILL BE APPLIED TO ALL AS&D RAIL ORDERS
Ph: 1-800-335-5909 Fax 1-800-203-4495 www.absolutedist.com AS&D Railing System Overview AS&D Aluminum Rail with Cable Double Posts for Corners Over-the-Post Top Rail 3-3/16 Cable Spacing Rail Guidelines
More informationBCC Optical Stabilizer Filter
BCC Optical Stabilizer Filter The Optical Stabilizer filter allows you to stabilize shaky video footage. The Optical Stabilizer uses optical flow technology to analyze a specified region and then adjusts
More information691A User's Guide. Picket Placer TM.
691A User's Guide Picket Placer TM Table of Contents Description 3 Horizontal Routine [Horz] Function Key 3 Find Picket Function Key 4 Example 5 Rework Function Key 5 Rise and Run / Angle Routines 6 Rise/Run
More informationFeature-based CAM software for mills, multi-tasking lathes and wire EDM. Getting Started
Feature-based CAM software for mills, multi-tasking lathes and wire EDM www.featurecam.com Getting Started FeatureCAM 2015 R3 Getting Started FeatureCAM Copyright 1995-2015 Delcam Ltd. All rights reserved.
More informationTechnical Guide G. GSpecialty Windows. Technical Guide G1
Technical Guide G Specialty Windows G Technical Guide G1 Product Features Styles Picture, Fixed Casement, Operating Casement, Double Hung, Single Hung, Radius Top and Cottage options. Standard Features
More informationWalls and Windows. Here is a useful link to explore for later -- AutoCAD drawing tutorials:
Walls and Windows Eventually we will import your CAD drawings and you will need well-constructed files which we will then use extrude, loft, and sweep, etc., in Max. Here is a useful link to explore for
More informationArchitectural & Design Catalog
Architectural & Design Catalog Welcome To Millwork Concepts The design of a new home is both an exciting and expensive endeavor. From the architect to the installer, the quality of the service creates
More informationMALE THREAD SPECIFICATIONS
MALE THREAD SPECIFICATIONS PARALLEL MALE THREADS M20 Thread type BSP-m BSP-m BSP-m BSP-m Metric Seal method ISO 1179-4 ISO 1179-4 ISO 1179-4 ISO 1179-4 ISO 9974-3 Designation thread ISO 228-1 ISO 228-1
More informationTechnical Information DAMPA TILES Decorative Marine Ceiling System
Technical Information DAMPA TILES Decorative Marine Ceiling System DAMPA Tiles Marine Ceiling System Consists of various types of tiles in many configurations with different function and architectural
More informationM204SMB Surface Mount Box Instructions
Instruction Sheet 860337070 Issue 7, June 2013 M204SMB Surface Mount Box Instructions General The CommScope M204SMB surface mount box (SMB) is designed for interior surface-mounted applications and can
More informationMultiTest 50 Tablet Hardness Tester
MultiTest 50 Tablet Hardness Tester Precisely measure up to 5 parameters Simple EasyTouch TM operation Fast multi-parameter measurement Robust design with minimal footprint Proven Dr. Schleuniger hardness
More information1 Measurement - Nets, Surface Area and Volume. Terms
1 Measurement - Nets, Surface Area and Volume Terms 2 Measurement - Nets, Surface Area and Volume Nets 1. Draw a net for the following shape. Include all measurements and symbols. 2. 3. 4. 3 Measurement
More informationContainTech Polypropylene Dimensional Data Expertise in Engineered Plastics Dated
ContainTech Dimensional Data Expertise in Engineered Plastics Dated 3-17-11 Table of Contents Cap... 23 Clean Out... 22 Combo Lateral ( Sanaitry Tee)... 16 Elbow: 90... 9 Elbow: 45... 10 End Seal... 3
More informationMIRROR POLISHED POSTS See page 46
PRE-ASSEMBLED POSTS We now offer the largest range of pre-assembled posts from stock. Straight out of the box and ready to bolt down or side fix. See the following pages to find the most suitable design.
More informationSurface Area and Volume
Name: Chapter Date: Surface Area and Volume Practice 1 Building Solids Using Unit Cubes Find the number of unit cubes used to build each solid. Some of the cubes may be hidden. 1. 2. unit cubes 3. 4. unit
More informationPNEUMATIC CONVEYING COMPONENTS
PNEUMATIC CONVEYING COMPONENTS TUBING, PIPE, BENDS, COUPLINGS & FITTINGS A HIGH-PERFORMANCE COMPANY H-P Products is certified to ISO 9001:2008 welcome to h-p products! H-P Products specializes in supplying
More informationThe layout connection system (snap-on) keeps the dividers in place and reduces noise caused by vibrations. Front to Back Partition
Partitioning Accessories The layout connection system (snap-on) keeps the dividers in place and reduces noise caused by vibrations. Front to Back Partition Divides the drawer along its depth; Dividers
More informationCall to Order! 1
Carbon Steel Stainless Steel ANGLES BEAMS CHANNELS Bar Angles...... Structural Angles.............., Junior Beams... Standard....... Wide Flange 7,,9, Standard...... MC Shapes- (Car, Ship and Junior)......,
More informationInstallation Guide - Adjustable pedestal Pro-Line
The Pro-Line series consists of four different height adjustable base pedestals. The adjustable base pedestals: Adjustable pedestal PRO S 1"3 16-2"3 32 (30-53 mm) 2"3 32-3"15 64 (53-82 mm) Adjustable pedestal
More informationSafety Systems Safety Integrated
3SE2 / SE3 Molded plastic /metal enclosure with separate actuator Application Safety interlock switches with separate actuator are used where the position of doors, covers or safety screens must be monitored
More informationSeceuro Range CD38 Built On
Seceuro Range CD38 Built On Technical Specifications www.hag.co.uk Advice Line 0800 072 3444 Seceuro Range CD38 Built On What is it made from The Seceuro range offers an all Aluminium Construction Typical
More informationCSiBridge 2017 (Version ) Release Notes
CSiBridge 2017 (Version 19.1.0) Release Notes Copyright Computers and Structures, Inc., 2017 Notice Date: 2017-03-09 This file lists all changes made to CSiBridge since the previous version. Most changes
More informationHow to Identify Fluid Ports and Connectors. A guide to North American, British, Japanese, German (DIN metric), and ISO connections
How to Identify Fluid Ports and Connectors A guide to North American, British, Japanese, German (DIN metric), and ISO connections How to measure threads Measure the thread diameter with an / caliper. When
More information