Drawing. Chapter 11. Bridge. A. Insert Views. Step 1. Click File Menu > New, click Drawing and OK. on the View Layout toolbar.

Transcription

1 Chapter 11 Bridge Drawing A. Insert Views. Step 1. Click File Menu > New, click Drawing and OK. Step 2. Click Model View on the View Layout toolbar. Step 3. Click Browse in the Property Manager. Step 4. Select your Bridge1 part file and click Open. Step 5. In the Property Manager, under Reference Configuration, Fig. 1 select BRIDGE JOINTS <As Machined> under Orientation click Right check Preview under Display Style select Hidden Lines Visible under Scale select Use custom scale set scale 1:1, Fig. 1. Step 6. Move the cursor into the drawing as shown in Fig. 2. Align left edge of view close to the left border. Align bottom edge close to top of Title Block. Click to place the Right Side view. Step 7. In the Property Manager, under Display Style, Fig. 3 select Hidden Lines Removed Fig. 3 Fig. 1 Step 8. Move the cursor straight up and click to place the Top view as shown in Fig. 4. Align Align Fig. 2 Fig. 4 SolidWorks 13 DRAWING BRIDGE Page 11-1 Cudacountry.net Tech Ed cudacountry@hotmail.com 9/18/13

2 Step 9. Move the cursor to the top left corner of the drawing and click to place the Isometric view, Fig. 5. Isometric view in the Property Man- Step 10. Click OK ager. Step 11. Click the Isometric view to select it, Fig. 5. Step 12. In the Property Manager: under Display Style, Fig. 6 select Hidden Lines Removed under Scale select Use custom scale select User Defined key-in 1:2.5 for scale click OK Fig. 5 Step 13. Grab any geometry of the Isometric view and move view to space right of Side view, Fig. 7. Click OK in the Property Manager. B. Save as "BRIDGE". Step 1. Click File Menu > Save As. Fig. 7 Fig. 6 Step 2. Key-in BRIDGE for the filename and press ENTER. SolidWorks 13 DRAWING BRIDGE Page 11-2

3 C. Display Dimensions. Step 1. Click Annotation on the Command Manager toolbar. Step 2. Click Model Items on the Annotation toolbar. Step 3. In the Property Manager: under Source: Fig. 8 select Selected feature under Dimensions select Marked for drawing in the drawing click Floor Beam in Top view, Fig. 9 click OK. Fig. 8 Step 4. Arrange the dimensions as shown in Fig. 9. Hide the 2.25 dimension. To hide, right click dimension and select Hide from menu. You can only place dimensions hereyou can not change dimension value. D. Smart Dimension. Step 1. Click Smart Dimension (S) on the Sketch toolbar. Fig. 11 Step 2. Add two dimensions: 2 width in Top View (internal structure width), Fig height from top of floor beam to bottom of top chord in Side View (internal structure height). Step 3. Save. Use Ctrl-S. Hide Click Floor Beam Fig. 9 Fig. 10 SolidWorks 13 DRAWING BRIDGE Page 11-3

4 E. Set Anchor. Step 1. Expand Sheet Format1 in the Feature Manger, right click Weldment Cut List Anchor1 and click Set Anchor, Fig. 12. Step 2. Click top right corner of the border lines, Fig. 13. F. Add Weldment Cut List. Step 1. Click Insert Menu > Tables > Weldment Cut List. Step 2. Click Isometric view in the graphic area, Fig. 13. Step 3. In the Property Manager set: under Table Position, Fig. 14 check Attach to anchor point click OK. G. Set Stationary Corner. Step 1. Click the Pan icon in the top left corner of the table, Fig. 15. Step 2. In the Weldment Cut List Property Manager set: select Top Right, Fig. 16 click OK, Fig. 17. Fig. 13 Fig. 12 Pan Anchor point Isometric view Fig. 15 Fig. 14 Fig. 16 Fig. 17 SolidWorks 13 DRAWING BRIDGE Page 11-4

5 H. Add Column. Step 1. Right click LENGTH column and click Insert > Column Right from menu, Fig. 18. Step 2. Double click in the column heading field and key-in TOTAL, Fig. 19. Step 3. Drag the column dividers to resize columns, Fig. 20. To resize, position cursor over column divider, when cursor changes to drag column divider. Resize columns to fit table in space on right of Top View, Fig. 21. Fig. 18 Fig. 19 Fig. 20 I. Sort Column C. Step 1. Right click Column C and click Sort > Descending from menu, Fig. 22. Sorting places the.25 size stock together, Fig. 23. Fig. 21 Fig. 22 Fig. 23 SolidWorks 13 DRAWING BRIDGE Page 11-5

6 J. Add Row Under Last.25 Stock. Step 1. Right click last row of.25 stock, Row 2 and click Insert > Row Below from menu, Fig. 24. K. Add Row Under Last.125 Stock. Step 1. Right click a cell in last row and click Insert > Row Below from menu, Fig. 25 and Fig. 26. L. Add Multiply Formula Row 2. Step 1. Click in cell below TOTAL header and click Equation tool in the Table Format toolbar, Fig. 27. Step 2. Click the cell below QTY and the cell address B2 is added to the Equation Editor, Fig. 28. Fig. 25 Fig. 24 Fig. 26 Step 3. Key-in the multiplication symbol * in the Equation Editor, Fig. 29. Step 4. Click the cell below LENGTH and the cell address is added to the Equation Editor, Fig. 30. Click OK, Fig. 31. Fig. 27 Fig. 29 Fig. 28 Fig. 30 Fig. 31 SolidWorks 13 DRAWING BRIDGE Page 11-6

7 M. Add Multiply Formula Row 3. Step 1. Repeat previous Steps and add formula to Row 3. Click in next empty cell in the TOTAL column and click Equation tool toolbar, Fig. 32. Step 2. Click row 3 cell in the QTY column and the cell address B3 is added to the Equation Editor, Fig. 33. in the Table Format Fig. 32 Step 3. Key-in the multiplication symbol * in the Equation Editor, Fig. 34. Fig. 34 Fig. 33 Step 4. Click row 3 cell in the LENGTH column and the cell address is added to the Equation Editor, Fig. 35. Click OK, Fig. 36. Fig. 35 Step 5. Repeat and add the multiplication formula to the other blank cells in TOTAL column (not the rows we added), Fig. 37. Fig. 36 Step 6. Save. Use Ctrl-S. Fig. 37 SolidWorks 13 DRAWING BRIDGE Page 11-7

8 N. Sum.25 Stock. Step 1. Click in first blank cell in TO- TAL column, cell E4 and click Equation tool in the Table Format toolbar, Fig. 38. Step 2. Click the drop down arrow for Functions and click SUM, Fig. 39. Fig. 38 Step 3. Click cell under TOTAL heading and the cell address E2 is added to the Equation Editor, Fig. 40. Step 4. Key-in colon : in the Equation Editor, Fig. 41. Step 5. Click next cell in the TOTAL column and the cell address is added to the Equation Editor, Fig. 42. Click OK, Fig. 43. Fig. 39 Step 6. Save. Use Ctrl-S. Fig. 41 Fig. 40 Fig. 42 Fig. 43 SolidWorks 13 DRAWING BRIDGE Page 11-8

9 O. Sum.125 Stock. Step 1. Click in last cell in TOTAL column, the blank cell and click Equation tool Fig. 44. in the Table Format toolbar, Step 2. Click the drop down arrow for Functions and click SUM, Fig. 45. Step 3. Click first.125 stock cell in TOTAL column and the cell address E5 is added to the Equation Editor, Fig. 46. Step 4. Key-in colon : in the Equation Editor, Fig. 47. Step 5. Click last.125 stock cell in TOTAL column and the cell address is added to the Equation Editor, Fig. 48. Click OK, Fig. 49. Step 6. Save. Use Ctrl-S. Fig. 44 Fig. 45 Fig. 47 Fig. 46 Fig. 48 Fig. 49 SolidWorks 13 DRAWING BRIDGE Page 11-9

10 P. Add Total Text. Step 1. Key-in TOTAL in cells next to the totals, Fig. 50. Q. Format Totals Cells Font. Step 1. In the TOTAL column, Ctrl click both TOTAL cells (cells that contain the data not the text) to select both cells, Fig. 51. in the Table For- Step 2. Click Use Document Format tool mat toolbar, Fig. 51. Fig. 50 Step 3. Click Bold in the Table Format toolbar, Fig. 52. Step 4. Save. Use Ctrl-S. Fig. 52 Fig. 51 SolidWorks 13 DRAWING BRIDGE Page 11-10

11 R. Auto Balloons. Step 1. Click Bridge in Isometric view in your drawing, Fig. 53. Step 2. Click Annotations the Command Manager toolbar. on Step 3. Click AutoBalloons on the Annotations toolbar. Isometric view Step 4. In the AutoBalloon Property Manager set: under Balloon Layout, Fig. 54 select Layout Balloons to Square click OK. Fig. 53 Step 5. Select a Balloon on bottom and then click the Magnetic Line, Fig. 55. Step 6. In the Magnetic Line Property Manager set Angle 30º, Fig. 56 and press the Tab key Fig. 55 Magnetic line move the Magnetic Line under the Isometric view, Fig. 57 drag balloons on side line onto bottom line repeat for top Magnetic Line, set to 30º, move above Bridge, drag balloon 10 onto top line also, neatly space balloons on Magnetic Lines, click OK Fig. 57 when done. Fig. 54 Fig. 56 Step 7. Save. Use Ctrl-S. SolidWorks 13 DRAWING BRIDGE Page 11-11

12 S. Add Your Name and Period to Title Block. Step 1. Use the Zoom to Area in the View toolbar to drag a zoom window around the DRAWN BY and PERIOD in the title block, Fig. 58. Step 2. Click Note toolbar. on the Annotation Step 3. Click just to the right of DRAWN BY:, Fig. 59. Step 4. Lock the Caps and key-in your first and last names, Fig. 59. Fig. 58 Zoom in the Prop- Step 5. Click OK erty Manager. Fig. 59 on the An- Step 6. Click Note notation toolbar. Step 7. Click just to the right of PERIOD: and key-in your Period number, Fig. 60. Fig. 60 Step 8. Click OK in the Property Manager. Step 9. Save. Use Ctrl-S. SolidWorks 13 DRAWING BRIDGE Page 11-12