HD Car DVR User Manual

Transcription

1 HD Car DVR User Manual Thank you for purchasing our multi-function car DVR This manual will instruct you how to use and install the car DVR, please kindly read it before using. Hope our product will meet your demand. We will provide good service to you. Preface: This car DVR adopts high-performance and low illumination CMOS HD AR0330 photographic chip. The car DVR has a unique, ultra-portable design so that it can be applied in various fields, which brings the convenient, safe, wonderful and colorful daily life for us. HD (1920*1080p) video is up to 30 frames per second (Fps), and video record with audio or mute status is optional. Dynamic picture has a strong continuity, and it can be automatically overwritten so that it can keep loop recording. Therefore, it is no need to worry that the memory card is full. The car DVR supports the motion detection function; Support playback recorded video. The product can support 32G. It is mainly applied in vehicle video record, and it will be the best helper for getting the proof in the traffic accident. Overview: This car DVR is small size and full HD designed, can be widely used in various car models. It is a good helper to keep the evidence when there is an accident and minimize the loss. Product Features: (1) Built-in G-sensor acceleration transducer. When the vehicle is suffered mutation accident, the car DVR will record video automatically. There is 15 seconds before and after the mutation to make the important image protection; (2) Shooting angle: 160 high-definition wide-angle fisheye lens; (3) Screen: the video will be display on car DVD navigation screen; (4) Video format: MOV (Resolution: 1920*1080P); (5) Memory card: TF memory card (4G-32G), high-speed micro SD card (more than Class C6 is recommended); (6) Intelligent control: motion detection. Automatically startup, record video, save files, shutdown; (7) Video output: via AVIN / AUX channel input on the Car DVD; (8) Language: multi-language support ((English, French, Italian, German, Spanish, simplified Chinese, traditional Chinese, Portuguese, Japanese, Russian). Working Indicator Light playback(yellow) video(red) audio(blue) function video record without audio video record with audio

2 pause record video mutation video record video playback pause playback Operation Guidance: A. Please connect the cable as below: Connect the yellow wire to the positive pole of battery; connect the black wire to negative pole of battery; connect the red wire to ACC of car, and connect yellow RCA plug to DVD video input port. When turn on the ACC the car, the machine will begin to record video automatically. When turn off the ACC of car, it will stop the recording and save the file automatically. Notice: If the cable is connected incorrectly, it will damage the machine and maybe cause fire. B. TF Card 1. Confirm the inserting direction of TF card, wrong inserting direction could damage the machine and TF card 2. Please use the TF card that meets the SDHC standard, C6 or more high speed TF card is recommended. 3. Format the TF card on the device when first using C. Turn on/off and auto off the video recorder: The machine will begin to record video automatically when start the car. When turn off the ACC of car, file will be saved in every 3/5/10 minutes(the time can be set as you like),and loop record continuously. Note: the car DVR will record for 10 seconds more after the car flame out. When the car DVR is in the video record mode, the red light flickers one time per second. The blue light is on when open the sound record function. The yellow light is on when car DVR in playback mode and flickers one time per second. Three lights will be all on when there is an accident and lock the file. So the file will not be overwritten. Keys functions description POWER button:startup & Shutdown MENU button :menu/playback (Pressing for 3 seconds will enter the playback) UP button:mute/sound record/page up DOWN button: one key lock/ page down OK button:start video record /stop video record/ok Installation

3 1. Insert the TF card firstly (if it is a new card, please format it firstly) 2. Press the car DVR to the windshield tightly. (Note: before installing please clean the windshield) Wire diagram (car has after reversing the visual function) Please note that the size of the back-pull lens plug, it only can be inserted into the female plug, please don t make mistake. Please install the back-pull lens on the rear windshield (if the lens is waterproof, it can be installed outside.) If the back-pull lens will be used as rearview camera, please connect to the reversing trigger line that is to say connect the red wire to the reverse light positive line. Wire diagram (car has not after reversing the visual function) Please note that the size of the back-pull lens plug, it only can be inserted into the female plug, please don t make mistake. Please install the back-pull lens on the rear windshield (if the lens is waterproof, it can be installed outside.) If the back-pull lens will be used as rearview camera, please connect to the reversing trigger line that is to say connect the red wire to the reverse light positive line and connect the two yellow powers supply RCA to the AUX/DVR/DTV and car reverse line. Wire diagram: Black female head is the input wire that connects the machine and the car. Yellow wire connects the DVD or other monitor. Black wire is ground connected. White and red wire connect the ACC (white wire is ignition control, red line is for power B+12V ), the car DVR will turn off automatically when the white line disconnect for 10 seconds.(please insure the B+ is connected to the battery, otherwise, the recording time will not be saved.) Simple operating instructions: 1.Startup & Shutdown When car started the machine will start too; car flamed out the machine will shutdown automatically. Or press the POWER button for 3 seconds to shutdown. 2.Start/stop video record The car DVR will record automatically when it is turned on. And it will stop record when it is turned off. Or press OK button to start record. 3. Mute/audio System default setting is that video and sound record is synchronously. Pressing UP button can choose the mute or sound record mode. 4.Locked by one key Press the DOWN button to lock the file in the emergency situation. 5. Mode switch When stop video record, press MENU button to restart video record or playback. 6. Time setting Stop video record, then press MENU to enter the system setting, choose the TIME or DATE to set the time, press OK to save the setting. 7. Delete file

4 In the playback mode, press MENU button to delete the file. Or enter the menu to format all files. 8. Enter into the menu: Please press the MENU button to enter into menu setting page. Recording Setting: Press MENU button to setup the parameter of video, you can select the detail items by pressed UP and DOWN button, then press OK button to confirm the setting. The detail parameter as below: 1. Effective Resolution: 1080FHD 1920 X P 1440 X P 1280 X 720 WVGA 1280 X 720 WXH VGA X 480 QVGA 320 X Circle recording:off / 3 Min / 5 Min / 10 Mins 3. Motion detection: ON/OFF 4. Audio: ON /OFF. 5. G-sensor Sensitivity:Off/Low/Standard/High 6. Stamp of Data & Time:On/Off Parameter Setting: Please press twice to setup the parameter of machine; you can select the detail items by pressed UP and DOWN button, then press OK button to confirm the setting. The detail parameter as below 1. Date/Time 2. Language: English / French / Spanish/ German/ Italian/Simple Chinese/Traditional Chinese/Russian/Japanese/Korean 3. TV Output: NTSC/PAL 4. Image Rotation: On/Off 5. Format: Format the TF card 6. Reset System: set the system parameter as the default value 7. Firmware Version: Check the Firmware Code of the device Note: 1. The product can t be installed at the place which interrupt driver`s vision. 2. Please install the product correctly and firmly, if you want to change the installation place, please replace the new 3m glue, otherwise, it may cause the product fall off while driving. Technical Parameter: 1. Input Voltage:DC10 18V 2. Current Consumption: 250mA

5 3. Effective Pixels:500 Million 4. Frame Rate:30 F/S 5. Compress Codec:H File Format:MOV 7. Static Current:<10mA 8. TF Card:Support Memory Storato 32G