VIDEO INTERCOM SYSTEM LINE-UP CATALOGUE. Flexible and convenient solutions that work for you. DISTRIBUTED BY :

Transcription

1 VIDEO INTERCOM SYSTEM LINE-UP CATALOGUE Trademarks and registered trademarks -MIFARE is a registered trademark of NXP B.V. and is used under license. - iphone and ipad are trademarks of Apple Inc., registered in the U.S. and other countries. -Android is a trademark of Google Inc. -SD, SDHC and SDXC Logos are trademarks of SD-C, LLC. -The software of the sub monit is based in part on the wk of the Independent JPEG Group. All other trademarks identified herein are the property of their respective owners. Imptant - Safety Precaution: Carefully read the operating instructions and installation manual befe using this product. - Panasonic cannot be responsible f the perfmance of the netwk and/ other manufacturers' products used on the netwk. DISTRIBUTED BY : The actual product may vary slightly from the photograph. All pictures of the LCD display are simulated. Weights and dimensions are approximate. Design and specifications are subject to change without notice. These products may be subject to expt control regulations. Flexible and convenient solutions that wk f you. MG-DHPC0EN 180TD/ZZZ-AU1

2 Why Panasonic? We are making every efft to research and develop state-ofthe-art technology, production process technology, and quality innovation. We will provide new products that will contribute to value improvement f customers by proposing solutions. Innovative products are created together with the customer. Diverse Product Line-up Panasonic offers various Video Intercom System models to flexibly suit the size of your house and your lifestyle. Analogue Single House Histy Proud to be the No. 1 market share holder in Japan Function/Spec Panasonic became a market leader in Japan with its Video Intercom with Wireless Monit Bell, Chime Voice Interphone Black & White Video Intercom Colour Video Intercom,000 Units Video Intercom with Wireless Monit Market Share (Japan) 74% Source: Panasonic's estimate based on internal research in 01 Video Intercom with IP Touch Screen Monit Smartphone Connect 1,0,000 Units Remote Answering Safety/Convenience Sales& Customer Satisfaction Development Customer Production We grasp customer needs, plan products, and then proceed to develop them. Safe, reliable products are manufactured under strict quality control. In addition, customer service and products that truly fit customer needs, earning us high acclaim in wld markets IP Dedicated to the Customer Centric Policy Everything we do is f our customers Stylish Design and Rich Features IP Video Intercom SIP Phone Wireless NVR Wide angle & PTZ We precisely grasp customer needs by asking f opinions, and then we create ideas in response. Our passion f developing truly great products helps to bring shape to these ideas. Developing these into the next product Understand usage condition Analysis of context of use Web survey Analysis of the situation of product returns Understand usage condition demand Technical trend analysis Idea planning Verification Market surveys Assessment by users/home Monit tests Commercialization Redeveloping results into the new products Customer opinions are sought both befe and after our products are launched, in an efft to offer the best possible products. Monit testing is also conducted at the prototype stage. If assessments do not meet expectations, further improvements are made. Pic. & SD-card rec Voice changer No, thank you! High Quality Products Low failure rates Numerous safety test items High-reliability tests User-friendly & multilingual UI No, thank you! compatible Easy installation (non polar, -wire) Photos are f illustrative purposes only.

3 Product Lineup VIEW AND TALK FLEXIBLY Panasonic offers various Video Intercom System models to flexibly suit the size of your house and your lifestyle. Stylish Premium DECT Wireless Series VL-SWD501 Expandable DECT Wireless Series VL-SWD7 1 x Main Monit: VL-MWD501 1 x : 1 x Wireless Sub Monit: VL-WD1 1 x Main Monit: VL-MWD7 1 x : 1 x Wireless Sub Monit: VL-WD1 Expandable DECT Wireless Series VL-SWD7 Expandable Series VL-SV7 1 x Main Monit: VL-MWD7 1 x : VL-V5L 1 x Wireless Sub Monit: VL-WD1 1 x Main Monit: VL-MV7 1 x : VL-V5L Compatibility of Main Monit, Wireless Monit and Please contact your nearest Panasonic dealer f sales infmation. = Connectable = Connectable (same as packaged combination) x = Not connectable Main Monit (Package No.) Extension Monit Wireless Sens Camera VL-WD81 (DECT) VL-WD1.-inch Wireless Sub Monit (DECT) VL-FKD Repeater VL-554/ U 1.0 M pixels VL-V M pixels (*1) VL-V5L 0. M pixels (*1, *) VL-V5 0. M pixels IP (*1, *, *) VL-V591 VN M pixels 1. M pixels Analogue 1.0 M pixels IP VL-VN M pixels Display size VL-MWD501 (VL-SWD501) VL-PS41 5-inch WVGA colour /Touch Panel up to 4 up to up to (*4) (*4) (*4) (*4) VL-MWD7 (VL-SWD7/SVD7) VL-PS41 7-inch WVGA colour up to (*5) VL-MWD7 up to (*5) up to VL-MWD7 (VL-SWD7/SVD7) AC 7-inch WVGA colour up to (*5) VL-MWD7 up to (*5) up to VL-MV7 (VL-SV7) VL-PS41 7-inch WVGA colour up to VL-MV7 VL-MV VL-PS40.5-inch QVGA colour VL-MVA Not included power supply unit.5-inch QVGA colour VL-MN1000 PoE PoE VL-PS40(*) 7-inch WVGA colour /Touch Screen up to 5 VL-MN1000 * 1 Wide/zoom settings and zoom position settings are not available. * phone LED light illumination settings and backlight compensation settings are not available. * Outside moniting using the dophone is not available. * 4 The image quality may be lower than that of the included in the package, but this is not a malfunction. * 5 A total of up to sub monits and extension monits can be registered to the main monit. * (VL-PS40) is sold separately. 4 5

4 System Configuration Example Comparison Chart Model Number System Units Wireless Video Intercom System VL-SWD501 Main Monit VL-MWD501 Wireless Monit VL-WD1 Bedroom 1 Living Kitchen Den (phone) Maximum Connectable Units DECT Repeater Garage Sens Camera Electric Lock Release ( Opener) Wireless Sens Camera VL-PS41 Touch Panel / Pan & Tilt Wide Angle Camera Wireless Video Intercom System * A total of up to sub monits and extension monits can be registered to the main monit. VL-SWD7 System Units Main/Extension Monit VL-MWD7 * Bedroom 1 * 1/ 1/ (DECT) (DECT) (DECT) Voice Changer / / / () / H: 170 V: 115 () /* ()* ()*1 ()*1 1 / * H: 87 V: H: 87 V: *1 When connecting, an optional is required. * These functions are not available f the supplied dophone (VL-V5L). You can use these functions with optional dophone. (not including the main monit) VL-PS41 Living VL-WD1 1/ Intercom Call Wireless Monit 1/ () / H: 170 V: 115 Night Vision (LED Light) Others 4 Repeater VL-WD81 1 Panasonic Wire / SD Card Recding Connectable Devices VL-SV7 (4) ()* Video / Picture Recding VL-FKD VL-SWD7 (Die-Cast Aluminium) Main Monit / Extension Monit Recding VL-SWD7 Wireless Sub Monit VL-SWD Den DECT Repeater VL-FKD Comparison of the wiring VL-PS41 Wire VL-PS41 VL-PS41 Panasonic Kitchen Wireless Video Intercom System This image shows the KX-NS500. * A total of up to sub monits and extension monits can be registered to the main monit. VL-SWD7 Main/Extension Monit VL-MWD7 * 1 VL-V5L 4 5 Den Wireless Monit VL-WD1 Option output * (A contact) *1 * (Optional ) * DECT Repeater This image shows the KX-NS500. VL-FKD VL-SV7 Main/Extension Monit VL-MV7 VL-PS41 VL-SV7 VL-V5L Living VL-V5L VL-MWD7 Please consult your dealer when connecting with a. *1 VL-V5L VL-MV7 *1 Option input x * (A contact) (Optional ) VL-PS41 * 1 Option input x * (A contact) System Units Video Intercom System (Optional ) VL-SWD7 *1 Panasonic Kitchen Bedroom VL-MWD7 Wire VL-MWD501 (not including the main monit) Living Please consult your dealer when connecting with a. System Units Bedroom VL-SWD7 VL-SWD501 * Option input x * (A contact) (Optional ) (not including the main monit) Panasonic Den : (included with a monit) VL-PS41 Wire VL-PS41 Kitchen This image shows the KX-NS500. Please consult your dealer when connecting with a. *1 When connecting, an optional is required. * Devices that can be connected to the option output: dobell light, do chime, rotating light, etc. When using a (VL-V591/V590), the option output is used by the. When using a ( series), the option output cannot be used. * When using a ( series), the option inputs can be used to connect an emergency button and dobell. However, when an optional do station is connected, only the do station dobell can be used (not both). 7

5 Stylish Premium DECT Wireless Series Wireless Video Intercom System VL-SWD501 5-inch Wide Screen Expandable DECT Wireless Series Wireless Video Intercom System VL-SWD7 VL-SVD7 / VL-SVD7: Wireless monit sold separately Wireless Video Intercom System VL-SWD7 VL-V5L 7-inch Wide Screen Wire *1 Main Monit VL-MWD7 * (not including the main monit) Wireless Monit VL-WD1 * Wire * Wire *1 * Easy installation by simply replacing existing dobell unit Nonpolar -wire system. Main Monit VL-MWD501 Wireless Monit VL-WD1 () VL-MWD501: 4 V DC supply unit (supplied) Main Monit VL-MWD7 *1 Easy installation by simply replacing existing dobell unit Nonpolar -wire system. * A total of up to sub monits and extension monits can be registered to the main monit. Wireless Monit VL-WD1 () VL-MWD7: 4 V DC supply unit (supplied) VL-MWD7: 0-40 V AC, 50/0 Hz DECT Wireless Touch Panel Highly Expandable Wireless Handset (DECT) The wireless design means that there is no troublesome wiring required when adding on to the system as well. You can add on up to sub monits and 4 DECT Wireless Sens Cameras f large homes, and easily confirm visits from a monit in each room. 4 The main monit has a 5-inch wide screen that clearly shows each visit's face. If it is difficult to see, simply touch the screen to activate an approximate x zoom hizontally and vertically. This makes it easy f everyone to see, and provides an easy-to-use operating screen. additional monits can be connected to the main monit using a combination of 7-inch wired monits and.-inch wireless monits (However, the maximum possible number of 7-inch wired monits is ). In addition, connectivity is also suppted. Total You can use the wireless monit to check visits and respond promptly from the living room, kitchen and elsewhere in the home even while you are doing something else. wireless monits can be connected, and the max wireless range is 100 m with no obstacles. You can also add up to DECT repeaters to expand the range. SD Card Recding You can automatically recd video images of visits while you're away from home. It will recd up to,000 visits (0 seconds per visit). And you can save and play the images on a PC that has an SD card slot. Electric Lock Release Suppt : AC1 V-1 A / DC1 V-1 A Wide-Angle Camera (Hizontally:170, Vertically:115 ) Wireless Sens Cameras Connectable Night Vision (warm white coloured LED lights) Voice Changer Intercom Call (between main monit and sub monit) 7-inch Screen The main monit and extension monit have a 7-inch wide screen that offers easy viewing of wide vertical and hizontal views. Electric Lock Release Suppt : AC0 V-1 A / DC4 V-1 A Picture Recding ( 50 visits (up to 8 still images per visit)) Night Vision (white coloured LED lights) Voice Changer Intercom Call (between the main monit, sub monit and extension monit) Options Related Product Options (phone) (Surface mount) U (Flush mount) CMOS 1.0 M pixels Flush Mounting Box VL-MB554 (phone) VL-V5L (Surface mount) Wireless Monit (Sub Monit) VL-WD1 Wireless Sens Camera VL-WD81 4 DECT Repeater VL-FKD VL-V591 0 main monits can be connected. Main Monit (Main Monit) VL-MWD501 (phone) VL-V5L (Surface mount) (phone) Extension Monit Wireless Monit (CMOS 1.0 M pixels) VL-MWD7 (Sub Monit) VL-V555 (CMOS 0. M pixels) VL-MWD7 VL-WD1 DECT Repeater VL-FKD VL-V591 0 main monits can be connected. Connectable Model Numbers KX-TDA0/100/100D/00/00 series KX-TDE100/00/00 series KX-NS00/500/700/1000 series This image shows the KX-NS500. Please consult your dealer when connecting with a. 8 9

6 Expandable Series VL-SWD501 Model Composition Video Intercom System VL-SV7 7-inch Wide Screen (not including the main monit) VL-SWD501 VL-MWD501 x 1 x 1 VL-WD1 x 1 VL-SWD501U VL-MWD501 x 1 U x 1 VL-WD1 x 1 VL-MWD501 Main Monit (Main monit) (Surface mount) U (Flush mount) (phone) VL-WD1 Wireless Monit (Sub monit) Main body Charger VL-V5L Wire * * Easy installation by simply replacing existing dobell unit Nonpolar -wire system. Highly Expandable additional 7-inch monits can be connected to the main monit. In addition, connectivity is also suppted. Main Monit VL-MV7 Picture Recding (8 Consecutive recded images each) Eight consecutive still images of visits are automatically recded. ( 50 times, 400 images in total) This ensures that you will see every person visiting your home. Images can also be displayed frameby-frame. () VL-MV7: 4 V DC supply unit (supplied) Weight Operating environment supply unit (VL-PS41) 4 V DC, 0.5 A (VL-PS41 supplied) Standby: Approx. 1.4 W Operating: Approx. 10 W 180 x 15 x 1 mm 470 g Supplied by the main monit 0 V DC, 0. A Rechargeable Ni-MH (AAA x ) : 19 x 118 x 0 mm U: 19 x 118 x 1.5 mm (excluding sections embedded into the wall) : 405 g U: 45 g Ambient temperature: Approx. -15 C to +55 C (tested up to -0 C) AC adapt Output: 5.5 V DC, 0.5 A Standby: Approx. 0.4 W (when the sub monit is not placed in the charger) During charging: Approx. 1.4 W 17 x 5 x 0 mm 4 x 81 x 7 mm 10 g (including the batteries) 70 g (excluding the AC adapt) Display 5-inch wide colour / WVGA (800x480 pixels).-inch colour / QVGA (0x40 pixels) Display language English Depends on main monit Talking method Hands-free Hands-free Hands-free Frequency range 1.88 GHz to 1.90 GHz 1.88 GHz to 1.90 GHz Transmitting range Approx. 100 m (line-of-sight distance from the main monit) Option output (A contact) Rated load: 4 V, 0. A lower Minimum applicable load: 5 V DC, A (Output when there is a call from the dophone) Viewing angle Hizontally: Approx. 170 Vertically: Approx. 115 Image sens / camera (pixel) CMOS sens (Approx. 1.0 M pixels) Minimum illuminance required 1 lx (within approx. 50 cm from the camera lens) Lighting method Warm white coloured LED lights IP rating / IK rating IP54 *1 / Compliant with IK07 Installation method : surface mount Wall mount (mounting bracket supplied) (mounting base supplied) U: flush mount (flush mounting box supplied) External material Flame retardant ABS and PS resin Aluminium and flame retardant PC+PS resin ABS resin ABS resin Options 4 VL-WD81 (F VL-SWD501) VL-FKD (F VL-MWD501 / VL-MWD7 / VL-MWD7) Wireless Sens Camera (VL-PS41) DECT Repeater Options 7-inch Screen The main monit and extension monit have a 7-inch wide screen that offers easy viewing of wide vertical and hizontal views. (phone) VL-V5L (Surface mount) (phone) (CMOS 1.0 M pixels) VL-V555 (CMOS 0. M pixels) Extension Monit VL-MV7 VL-V591 Electric Lock Release Suppt : AC0 V-1 A / DC4 V-1 A Night Vision (white coloured LED lights) Voice Changer Intercom Call (between the main monit and extension monit) 0 main monits can be connected. Connectable Model Numbers KX-TDA0/100/100D/00/00 series KX-TDE100/00/00 series KX-NS00/500/700/1000 series Please consult your dealer when connecting with a. This image shows the KX-NS supply unit (VL-PS41) Input: 0-40 V AC, 0. A (50/0 Hz) AC adapt 4 V DC, 0.4 A Output: 4 V DC, 0. A Output:.5 V DC, 0.5 A During standby: Approx. 1.5 W During standby: Approx. 1.5 W Operating: Approx. 4.5 W (when the LED lights are not lit), Operating: Approx.. W (when transmitting) Approx. 8 W (when the LED lights are lit) 10 x 118 x 90 mm (when the camera is front facing and including the wall mount bracket) 104 x 100 x 54 mm 8 x 111 x 9 mm Weight 90 g 15 g 88 g (excluding the AC adapt) Operating environment Ambient temperature: Approx. 0 C to +50 C Ambient temperature: Approx. -0 C to +50 C (indo use only) Frequency range 1.88 GHz to 1.90 GHz 1.88 GHz to 1.90 GHz Transmitting range Approx. 100 m (line-of-sight distance from the main monit) Approx. 100 m (line-of-sight distance from the main monit) Angular field of view (camera angle) Hizontal: Approx. 5 Vertical: Approx. 41 Image sens 0. M pixels CMOS Minimum illuminance required 1 lx * Lighting method white coloured LED lights * Sens detection range Heat sens (when the surrounding temperature is approx. 0 C) Hizontal: Approx., vertical: Approx. 0, detection range: Approx. 5 m Motion detection sens Hizontal: Approx. 5, vertical: Approx. 41 Sens detection method Pyroelectric infrared sens (heat sens) and motion detection Adjustable mounting angles Hizontal: ±90, vertical: facing fward - facing down approx. 0 (adjustable when mounting) Heat sens adjustable angles Manually adjustable to angles IP rating IP54 *1 Installation method Wall mount (wall mount bracket supplied) Wall mount attach to DIN rail External material PC+ABS resin Flame retardant PC+ABS resin PS resin *1 Water resistance is only assured if the dophone/the camera is installed crectly accding to the instructions in the Installation Guide, and appropriate water protection measures are taken. Do not install the camera in areas directly exposed to water rain. * The minimum illuminance required when the camera s [Brightness] setting is set to [+]. * Approx. 8.5 lx when m in front of the camera, and approx. 4 lx when m away and 0 to the left right of the camera

7 VL-SWD7 / VL-SVD7 Model Composition VL-SWD7 VL-MWD7 x 1 x 1 VL-WD1 x 1 Weight Operating environment VL-SVD7 VL-MWD7 Main Monit (Main monit) Extension Monit (not including the main monit) * VL-SWD7 / VL-SVD7 Model Composition VL-SWD7 VL-MWD7 x 1 VL-V5L x 1 VL-WD1 x 1 VL-SVD7 158 supply unit (VL-PS41) 4 V DC, 0.5 A Standby: Approx. 1.8 W Operating: Approx. 11. W 158 x 4 x 9.5 mm 710 g VL-MWD7 x 1 x 1 U VL-MWD7 x 1 VL-V5L x 1 *VL-SVD7: Wireless monits sold separately VL-WD1 *VL-SVD7: Wireless monits sold separately VL-PS41 (phone) Wireless Monit (Sub monit) supply unit Supplied by the main monit 0 V DC, 0. A : 19 x 118 x 0 mm U: 19 x 118 x 1.5 mm (excluding sections embedded into the wall) : 405 g U: 45 g Ambient temperature: Approx. -15 C to +50 C (tested up to -0 C) 5 * Main boody Charger 4 Main body: Rechargeable Ni-MH (AAA x ) Charger: AC adapt Output: 5.5 V DC, 0.5 A Standby: 0.5 W (when the sub monit is not placed in the charger) Operating: 1. W Main body: 17 x 5 x 0 mm Charger: 4 x 81 x 7 mm Main body: 10 g (including the batteries) Charger: 70 g (excluding the AC adapt) Input: 0-40 V AC, 0. A, 50/0 Hz Output: 4 V DC, 0. A 104 x 100 x 54 mm 15 g Ambient temperature: Approx. 0 C to +50 C Display 7-inch wide colour / WVGA (800x480 pixels).-inch colour / QVGA (0x40 pixels) Display language English, Arabic English, Arabic Talking method Hands-free Hands-free Frequency range 1.88 GHz to 1.90 GHz 1.88 GHz to 1.90 GHz Transmitting range Approx. 100 m (line-of-sight distance from the main monit) Viewing angle Hizontally: Approx. 170 Vertically: Approx. 115 Image sens / camera (pixel) CMOS sens (Approx. 1.0 M pixels) Minimum illuminance required 1 lx (within approx. 50 cm from the camera lens) Lighting method Warm white coloured LED lights, Infrared LEDs IP rating / IK rating IP54 * / Compliant with IK07 Installation method Wall mount : surface mount (mounting base supplied) (mounting bracket supplied) U: Flush mount (Flush mounting box supplied) Wall mount attach to DIN rail External material Flame retardant PC+ABS resin, Flame retardant ABS resin Aluminium and flame retardant PC+PS resin ABS resin Flame retardant PC+ABS resin VL-SV7 Model Composition VL-SV7 VL-MV7 x 1 VL-V5L x 1 VL-MV7 VL-V5L VL-PS41 Main Monit (Main monit) Extension Monit (not including the main monit) 4 supply unit (VL-PS41) 4 V DC, 0.4 A Standby: Approx. 1. W Operating: Approx. 9.8 W (phone) Supplied by the main monit supply unit Input: 0-40 V AC, 0. A, 50/0 Hz Output: 4 V DC, 0. A 158 x 4 x 9.5 mm 11 x 99 x.5 mm 104 x 100 x 54 mm Weight 710 g 00 g 15 g Operating environment Ambient temperature: Approx. -15 C to +55 C (tested up to -0 C) Ambient temperature: Approx. 0 C to +50 C Display 7-inch wide colour / WVGA (800x480 pixels) Display language English, Arabic Talking method Hands-free Hands-free Viewing angle Hizontally: Approx. 87 Vertically: Approx. Image sens / camera (pixel) CMOS sens (Approx. 0. M pixels) Minimum illuminance required 1 lx (within approx. 50 cm from the camera lens) Lighting method Warm white coloured LED lights, Infrared LEDs IP rating / IK rating IPX *1 Installation method Wall mount (mounting bracket supplied) Surface mount (mounting base supplied) Wall mount attach to DIN rail External material Flame retardant ABS resin Flame retardant ABS resin Flame retardant PC+ABS resin *1 Water resistance is only assured if the dophone is installed crectly accding to the instructions in the Installation Guide, and appropriate water protection measures are taken. VL-V591 VL-V VL-MWD7 VL-V5L VL-WD1 Main Monit (Main monit) Wireless Monit (Sub monit) (phone) Extension Monit Main body Charger (not including the main monit) * * V AC, 50/0 Hz Supplied by the main monit Rechargeable Ni-MH (AAA x ) Standby: Approx..5 W Operating: Approx. 10 W AC adapt Output: 5.5 V DC, 0.5 A Standby: Approx. 0.4 W (when the sub monit is not placed in the charger) During charging: Approx. 1.4 W 158 x 4 x 9.5 mm 11 x 99 x.5 mm 17 x 5 x 0 mm 4 x 81 x 7 mm Weight 85 g * 00 g 10 g (including the batteries) 70 g (excluding the AC adapt) Operating environment Ambient temperature: Approx. -15 C to +55 C (tested up to -0 C) Display 7-inch wide colour / WVGA (800x480 pixels).-inch colour / QVGA (0x40 pixels) Display language English, Arabic Depends on main monit Talking method Hands-free Hands-free Hands-free Frequency range 1.88 GHz to 1.90 GHz 1.88 GHz to 1.90 GHz Transmitting range Approx. 100 m (line-of-sight distance from the main monit) Viewing angle Hizontally: Approx. 87 Vertically: Approx. Image sens / camera (pixel) CMOS sens (Approx. 0. M pixels) Minimum illuminance required 1 lx (within approx. 50 cm from the camera lens) Lighting method Warm white coloured LED lights, Infrared LEDs IP rating / IK rating IPX * Installation method Wall mount (mounting bracket supplied) Surface mount (mounting base supplied) External material Flame retardant PC+ABS resin, Flame retardant ABS resin Flame retardant ABS resin ABS resin ABS resin *1 When sub monits and extension monits are used together, a total of up to sub monits and extension monits can be registered. * Including AC cd. * Water resistance is only assured if the dophone is installed crectly accding to the instructions in the Installation Guide, and appropriate water protection measures are taken. 0 main monits can be connected. supply unit (VL- PS41) 4 V DC, 0. A Standby: Approx. 0.0 A Operating: Approx. 0.0 A Approx. 58 x 180 x 17. mm Weight Approx..0 kg Operating environment Ambient temperature: Approx. -10 C to +50 C Talking method Hands- free Viewing angle Hizontally: Approx. 87 Vertically: Approx. Image sens / camera (pixel) CMOS sens (Approx. 0. M pixels) Installation method Flush mount (Flush mounted box included) External material Stainless steel and flame retardant ABS resin

8 One Panasonic Solution Greater peace of mind with interconnected Panasonic IP products IP Video Intercom / Netwk Camera Moniting IP Video Intercom System f Apartment Complexes SIP Phone Communication SIP Phone NVR NVR Recding Operation Specification - Codec Fmat: H.4 (Fixed) - Image Resolution: 70p (180x70 pixels) less - Frame Rate: 0 fps less Recommended Models * - E-series, i-pro series Main Features VL-VN1900 Pure IP lobby station with a colour LCD monit and wide-angle camera. Elegant design and durable structure with a metallic panel..5-inch colour LCD monit (0x40 pixels) - Displays the resident's name - On-screen user guidance Wide angle camera - Wide view of 10 degrees (hizontal), 7 degrees (vertical) - Mechanical adjustment (up to +/- 15 degrees vertically) -.0 M pixels provide a clear image E-lock unlocking function - Unlock the public do by using an IC card (Built-in MIFARE RFID) - Unlock the public do by using a PIN code f each residence - Strong and elegant exteri with an aluminium panel - IP55, compliant with IK07 - Phonebook (-No., Resident s names) - Theft detection buzzer Monit VL-MN1000 Pure IP room monit with 7-inch wide LCD and touch screen. Main Features 7-inch wide LCD with capacitive touch screen - Provides a clear image on the wide screen - Accurate and smooth operation via a capacitive touch screen IP camera monit - various areas using a Panasonic Netwk Camera (Suppted devices: Panasonic i-pro series, E-series) Standard PoE is suppted - can be supplied via Ethernet cable (PoE) - also available (VL-PS40 is sold separately) - Video messages from the : up to most recent 50 - Manual recding (videos): up to most recent 50 - Auto/manual recding (still images): up to most recent E-lock unlocking (both individual and public dos) - 5 sens inputs (emergency/urgency button and other senss) and 1 do bell input Recommended Model-No. * - KX-HDV40 (Video and Audio) - KX-HDV0 (Audio) - KX-HDV10 (Audio) Main Features VL-VN1500 Pure IP do station with a wide-angle camera and RFID reader. Simple and sleek design. Wide-angle camera - Wide view of 11 degrees (hizontal), 9 degrees (vertical) - 1. M pixels provide a clear image E-lock unlocking function - Unlock the individual dos by using an IC card (Built-in MIFARE RFID) * Relay box is required when connecting an E-lock to the do station. (VL-RLY1 is sold separately) Standard PoE is suppted - can be supplied via Ethernet cable (PoE) - also available (VL-PS40 is sold separately) - Night vision with white coloured LED lights - Theft detection buzzer Operation Specification - Codec Fmat: H.4 (Fixed) - Image Resolution: 70p (180x70 pixels) WVGA (800x480 pixels) D1 (704x57 pixels) - Frame Rate: /5/0 fps * Consult your certified Panasonic dealer f me infmation. F the latest compatible IP cameras and SIP Phones, visit VL-VN devices* are suppted. Panasonic SIP Phone is available in the system. * Includes setup tool f mass configuration of 000 devices Main Features Embedded SIP server - Suppts 000 SIP devices (,, Monit and Panasonic SIP Phone) Voice mail - Voice mails can be issued by the SIP Phone to each room grouped rooms Recommended Models * - E-series - notification* Even if the guard is out, voice mails from residents to the guard station (SIP Phone) can be fwarded via , enabling quick access to imptant voice mail * External mail server and an internet connection are required

9 System Diagram of the Apartment System Suppt up to 00 devices on a system without a Suppt up to,000 devices on a system with a FUNCTION - 00 SIP devices are suppted - Multiple sessions are suppted - Send text mail from control room to all monits - Easy setup by PC tool FUNCTION -,000 SIP devices are suppted - Multiple sessions are suppted - notification - Send voice mail from control room to all monits - Easy setup by PC tool Residence Residence Residence Site 1 Residence Residence Residence Residence Residence Residence Common Area Entrance Parking Common Area Common Area Entrance Parking Common Area Common Area Entrance Parking Supply U Switch Switch Switch Guard Guard SIP Phone PC SIP Phone PC NVR NVR Switch Switch * E-lock f requires Relay Box (Sold separately. Model-No. VL-RLY1) 1 17

10 Analogue Video Intercom System f Apartment Complexes Lift Controller VL-V70 VL-V70 Functions as a distribution box repeater. The function can be switched with a DIP switch. Controlling the destination of lifts Controlling the destination (flo) of visits by linking with the lift and lift control box. Device f extending the lobby stations and control boxes. Role as a distribution box Suppted control methods Features A distribution box f connecting the control box with the main monit of each room. Role as a repeater box A repeater box f amplifying the signal when the control box and main monit are far away from each other. Only one can be connected between the control box and distribution box # :1 control (Relay signalling) - Binary control * The suppted control method depends on the specifications of the lift and lift control box. Contact the lift manufacturer f details. Extend lobby stations / control boxes - lobby stations - 4 control boxes Features phone f the public entrance of housing complexes. Destination display, calling, conversation, electric lock - Guidance (simple usage f visits) - Wide angle camera : Hizontally: approx. 170 Vertically: approx Heat sens: The backlight of the display and buttons are turned on when a visit is detected inch LCD / white backlit LCD - Blue / Amber LED backlit buttons - White coloured LED lights f night colour vision - Unlock with PIN-code - number and name registration - owner name display Connectable devices - Security camera - - Access controller Device f controlling the entire system Features - Easy setup ( number registration) - Easy connection check (Check connections between the control box and main monit of each room) - Real time moniting - Log (SD card recding) Text log: Me than 90,000 items (date, caller, receiver, operation, status) Image log: 90,000 images (overwrite save) (visits call) Connectable devices - - PC (f program settings) - Monit (f real time moniting) Main Monit Line Up VL-MWD7 VL-MWD7 VL-MV7 VL-MV/VL-MVA *1 supply unit (VL-PS41) 4 V DC, 0.5 A Standby: Approx. 1.8 W Operating: Approx. 11. W 0-40 V AC (50/0 Hz) Standby: Approx..5 W Operating: Approx W supply unit (VL-PS41) 4 V DC, 0.4 A Standby: Approx. 1. W Operating: Approx. 9.8 W supply unit (VL-PS40) 4 V DC, 0.5 A Standby: Approx. 1. W Operating: Approx. 8.0 W 158 x 4 x 9.5 mm 158 x 4 x 9.5 mm 158 x 4 x 9.5 mm 19 x 19 x 9 mm Weight 710 g 85 g * 710 g 0 g Operating environment, Display 7-inch wide colour / WVGA (800x480 pixels) 7-inch wide colour / WVGA (800x480 pixels) 7-inch wide colour / WVGA (800x480 pixels).5-inch colour / QVGA (0x40 pixels) Display language English, Arabic English, Arabic English, Arabic English Frequency range 1.88 GHz to 1.90 GHz 1.88 GHz to 1.90 GHz - - Installation method Wall mount (mounting bracket supplied) External material Suppted functions station bell Flame retardant PC+ABS resin, Flame retardant ABS resin 1 do station input (/V554U, VL-V555, V5L) 1 do bell input release suppt (f individual x 1, f public x 1) Picture recding 400 images (up to 50 visits (up to 8 still images per visit)) Flame retardant PC+ABS resin, Flame retardant ABS resin 1 do station input (/V554U, VL-V555, V5L) 1 do bell input (f individual x 1, f public x 1) 400 images (up to 50 visits (up to 8 still images per visit)) Flame retardant ABS resin 1 do station input (/V554U, VL-V555, V5L) 1 do bell input (f individual x 1, f public x 1) 400 images (up to 50 visits (1 1-8 still images per visit)) Flame retardant ABS resin - 1 do bell input 1 (f public x 1) 0 images (up to 0 visits, 1 shot per visit) Voice changer Yes Yes Yes - Pan, Tilt, Zoom Pan, Tilt, Zoom (f, /V554U, VL-V555) Pan, Tilt, Zoom (f, /V554U, VL-V555) Pan, Tilt, Zoom (f, /V554U, VL-V555) - Wireless monit (VL-WD1) * (VL-WD1) * - - Extension monit (VL-MWD7) * (VL-MWD7) * (VL-MV7) - Repeater (VL-FKD) (VL-FKD) - - Intercom call Yes Yes Yes (between main monit, sub monit, and extension monit) (between main monit, sub monit, and extension monit) (between main monit and extension monit) - Other functions Guard call Monit security camera Emergency call VL-PS41 ( ) Guard call Monit security camera Emergency call *1 is sold separately. * Including AC cd. * additional monits (Extension monit/wireless sub monit) can be connected. (*up to of extension monits) *4 Either one can be connected. Guard call Monit security camera Emergency call VL-PS41 ( ) Guard call *4 Monit security camera Emergency call *4 VL-PS40 ( ) f VL-MV only 18 19

11 Basic System Each Branch connects up to 10 es Each connects up to 0* Units (* units: up to 50 f each control box) 10 es per Branch #10 #10 Wire Wire Wire Wire #1~#10: Standard mode 50 Units Expanded System f Large scale building Wire Wire 50 Units 50 Units Monit Lineup VL-MWD7/ VL-MWD7 Main monit SOS Wireless monit VL-WD1 Wire x Wire x #9 #9 Wire Wire Wire Wire Repeater 0 Units per Repeater Reception 4 es Gate Security Gym VL-V70 4 Wire Wire #1 # 54 * s 50 Units 50 Units,40 Units VL-MV7 VL-MWD7: 4 V DC supply unit (supplied) VL-MWD7: 0-40 V AC, 50/0 Hz Main monit SOS *Wireless monits NOT suppted # # Wire Wire Wire Wire #1 Wire Wire Wire Wire #1 Expanded System f Multi building,40 Units #1 # VL-V70 50 Units VL-V70 #1 # 50 Units VL-MV/ VL-MVA* 1 * SOS 4 V DC supply unit Monit *1 is sold separately. * Either one can be connected. 18 s VL-V70 Wire Wire x 4 Branches Wire Wire Branch1 Branch Branch Branch4 Coax (NTSC) Monit SD Card (sold separately) Wire Lift Controller VL-V70 Wire x Security Gym VL-V70 #1 # 50 Units Wire Wire Wire Wire VL-V70 #1 # 50 Units Wire #1 # es do not operate as repeaters that allow longer distances between the Control Box and s. s () connected to es (VL-V70) cannot be called from the main monits terminals. Coax (NTSC/PAL) :up to (without ) up to 18 (with ) Security Camera Access Control Wiring Distance *Use PE (polyethylene)-insulated cables. Reception Gym Security Gate Terminal up to 4 via system Lift Controller VL-V70 Lift Controller VL-V70 Lift:up to Reception 4 es Wiring run Wire diameter Wire diameter Wiring run 0.5 mm ( AWG) 1. mm (17 AWG) 0.5 mm ( AWG) 1. mm (17 AWG) - () m 00 m - (Repeater Mode) 100 m 00 m - The farthest (Standard Mode) 100 m 00 m (Repeater Mode) - The farthest (Standard Mode) 100 m 00 m (Standard Mode) - Main Monit 100 m 00 m - The farthest Lift Controller 100 m 00 m VL-V70 54 * s #1 # *There are usage restrictions when connecting me than 19 s. Consult your certied Panasonic dealer f me infmation. (VL-PS40/PS41) SOS Sens Button (emergency call) 0 1 Bell Gate

12 VL-VN1900 series (IP Video Intercom System f Apartment Complexes) series (Analogue Video Intercom System f Apartment Complexes) VL-VN1900 (VL-PS40) (VL-PS40) supply unit (VL-PS40) 4 V DC, 0. A Input: 0-40 V AC, 0. A (50/0 Hz) Output: 4 V DC, 0. A Standby:.5 W, Operating: 8.5 W 7 x 179 x mm (excluding sections embedded into the wall) 11 x 100 x 54 mm Weight 1.5 kg 0 g Operating environment Ambient temperature: Approx. -10 C to +55 C Ambient temperature: Approx. 0 C to +50 C (indo use only) Display.5-inch colour display (0x40 pixels) Display language English, Arabic, French, Italian, German, Spanish and Dutch Only user guidance suppts multiple language Resident s names are only in English Talking method Hands-free Netwk interface 10BASE-T/100BASE-TX (Auto MDI/MDI-X) Netwk protocol TCP/IP, UDP Wiring UTP (cat.5e higher) Card reader (RFID) 1.5 MHz (ISO/IEC 1444 Type A (MIFARE)) Expanded interface Suppt f electric lock releasing (entrance unlocking) x 1 Viewing angle Hizontally: Approx. 10, Vertically: Approx. 7 (15 angle adjusting, vertical only) Image sens.0 M pixels CMOS sens Minimum illuminance required 1 lx (within approx. 50 cm from the camera lens) Lighting method White coloured LED lights SIP server Embedded SIP server (up to 00 devices) Video / Audio fmat Video: H.4, Audio: G.711 IP rating / IK rating IP55 *1 / Compliant with IK07 Installation method Flush mount (flush mounting box supplied) Wall mount attach to DIN rail External material Aluminium Flame retardant PC+ABS resin Suppted functions 100 numbers using numbers 0 through 9 and letters A through F Phonebook (-No., Resident s name) Theft detection buzzer Unlock lobby do via a PIN code RFID card (MIFARE) Reception mode Display a BMP file set by the user (0x180 pixels) VL-VN1500 VL-MN1000 VL-VN1700 Monit PoE (IEEE 80.af compliant, Class device) supply unit (VL-PS40 * ) 4 V DC, 0. A PoE: Standby:.5 W / Operating: 5.1 W VL-PS40: Standby:. W / Operating:. W PoE (IEEE 80.af compliant, Class device) supply unit (VL-PS40 * ) 4 V DC, 0. A PoE: Standby: 1.9 W / Operating:. W VL-PS40: Standby:.1 W / Operating:. W V AC, A, 50/0 Hz Under 50 W 141 x 100 x 8.5 mm 17.5 x 05 x 7.8 mm 88 x 40 x 40 mm Weight 50 g 550 g 4.5 kg Operating environment Ambient temperature: Approx. -10 C to +55 C 88 Display 7-inch wide colour display with touch screen (800x480 pixels) Display language English, Arabic, French, Italian, German, Spanish and Dutch Talking method Hands-free Hands-free Netwk interface 10BASE-T/100BASE-TX (Auto MDI/MDI-X) 10BASE-T/100BASE-TX (Auto MDI/MDI-X) 10BASE-T/100BASE-TX/1000BASE-T (Auto MDI/MDI-X) Netwk protocol TCP/IP, UDP TCP/IP, UDP TCP/IP, UDP Wiring UTP (cat.5e higher) UTP (cat.5e higher) UTP (cat.5e higher) Card reader (RFID) 1.5 MHz (ISO/IEC 1444 Type A (MIFARE)) Expanded interface E-lock x 1 *Relay box VL-RLY1 is required (sold separately) Sens input x 5 (including emergency / urgency button) Viewing angle Hizontally: Approx. 11, Vertically: Approx. 9 Image sens 1. M pixels CMOS sens Minimum illuminance required 1 lx (within approx. 50 cm from the camera lens) Lighting method White coloured LED lights Video / Audio fmat Video: H.4, Audio: G.711 Video: H.4, Audio: G.711 Recding Internal memy (video with audio can be saved) IP rating / IK rating IP54 *1 / Installation method Surface mount (mounting base supplied) Surface mount (mounting bracket supplied) Flush mount (mounting box VL-VN1790 sold separately) Mountable to 19-inch racks External material PC+ABS resin PC+ABS resin Front Cabinet: ABS, Lower / Upper Cabinet: Steel Suppted functions Unlock individual dos via the RFID card (MIFARE) Theft detection buzzer Moniting through the IP camera Emergency / Urgency call, Sens, bell Intercom calls between monits (family neighbours) Calls to SIP Phones (guard station, reception, etc.) Register up to IP cameras per monit * Register up to 18 SIP Phones per monit *4 Voice mail notification Suppts up to 000 SIP devices (embedded SIP server) *1 Water resistance is only assured if lobby station/the dophone installed crectly accding to the instructions in the Operating Instructions, and appropriate water protection measures are taken. * VL-PS40 is sold separately. * System total up to 500 IP cameras. Consult your dealer f me infmation. *4 System total up to 50 SIP phones. Consult your dealer f me infmation. supply unit (VL-PS40) 4 V DC, 0. A Input: 0-40 V AC, 0. A (50/0 Hz) Output: 4 V DC, 0. A Standby: Approx. 1.9 W Operating: Approx. 4.5 W 7 x 179 x.5 mm (excluding sections embedded into the wall) 11 x 100 x 54 mm Weight.0 kg 0 g Operating environment Ambient temperature: Approx. 0 C to +50 C Ambient temperature: Approx. -10 C to +55 C (indo use only) Display 4.-inch monochrome display (white backlit LCD) Display language English Talking method Hands-free Expanded interface Suppt f electric lock releasing (entrance unlocking) x 1 VIDEO-IN (recommended Panasonic security camera) x 1 Viewing angle Hizontally: Approx. 170 Vertically: Approx. 115 Image sens (1/4 inch) CMOS sens (approx. 1 M pixels) Minimum illuminance required 1 lx (within approx. 50 cm from the camera lens) Lighting method White coloured LED lights IP rating / IK rating IP55 *1 / Compliant with IK07 Installation method Flush mount (flush mounting box supplied) Wall mount attach to DIN rail External material Stainless steel (partially ABS and PC) Flame retardant PC+ABS resin Suppted functions Guidance (simple usage f visits) Night colour vision (white coloured LED lights) Heat sens: The backlight of the display and buttons are turned on when a visit is detected Display the resident s names Unlock with PIN-code 10 VL-V70 * VL-V70 / Repeater Box Lift Controller Supply Unit Supply Unit Supply Unit Supply Unit supply unit (VL-PS40) 4 V DC, 0. A supply unit (VL-PS40) 4 V DC, 0.1 A supply unit (VL-PS40) 4 V DC, 0. A supply unit (VL-PS40) 4 V DC, 0.1 A Standby: Approx..5 W Operating: Approx..7 W Standby: Approx. 1. W Operating: Approx..0 W Standby: Approx. 0.4 W Operating: Approx. 4.4 W Standby: Approx. 1.5 W Operating: Approx. 1.5 W x 10 x 5.5 mm Weight 400 g 50 g Operating environment Ambient temperature: -10 C to +50 C (indo use only) Installation method Wall mount attach to DIN rail External material ABS (flame retardant ABS resin) Log Save the text logs and visits images in the SD card (sold separately) Text logs: Me than 90,000 items Images: 90,000 images Suppted functions USB connection (provide PC application/english) date and time setting set the room number to the monit estimate the status of the equipment in the system operation setting (terminal, pass code, and so on.) SD card (SDHC/SDXC): Log function VIDEO OUTPUT (NTSC up to 1) RJ-11: Connect with system Dip switch Mode change (Distribution mode/repeater mode) Termination setting (Nmal/Termination) ID setting (1-10) Suppted control methods 1:1 control (Relay signalling) Binary control Extend lobby stations / control boxes lobby stations 4 control boxes *1 Water resistance is only assured if the lobby station is installed crectly accding to the instructions in the Installation Guide, and appropriate water protection measures are taken. * The suppted control method depends on the specifications of the lift and lift control box. Contact the lift manufacturer f details.