VIDEO INTERCOM SYSTEM. Flexible and convenient solutions that work for you. System Configuration Example. LINE-UP CATALOGUE System Units

Transcription

1 VIDEO INTERCOM SYSTEM System Configuration Example LINEUP CATALOGUE System Units Wireless Video Intercom System VLSWD50 Main Monit VLMWD50 Wireless Monit VLWD3 Bedroom DECT Repeater VLV55 VLFKD Living Kitchen Den Garage Wireless Sens Camera VLPS0 VLWD8 Electric lock Electric lock System Units Video Intercom System VLSVN5 Main Monit VLMVN5 VLV555 Bedroom Mobile Devices Living Router Kitchen Den VLPS0 Electric lock VLRLY Electric lock Trademarks and registered trademarks MIFARE is a registered trademark of NXP B.V. and is used under license. iphone and ipad are trademarks of Apple Inc., registered in the U.S. and other countries. Android is a trademark of Google Inc. SD, SDHC and SDXC Logos are trademarks of SD3C, LLC. The software of the sub monit is based in part on the wk of the Independent JPEG Group. VIGIK is a registered trademark of La Poste. All other trademarks identified herein are the property of their respective owners. Imptant Safety Precaution: Carefully read the operating instructions and installation manual befe using this product. Panasonic cannot be responsible f the perfmance of the netwk and/ other manufacturers' products used on the netwk. The actual product may vary slightly from the photograph. All pictures of the LCD display are simulated. Weights and dimensions are approximate. Design and specifications are subject to change without notice. These products may be subject to expt control regulations. Flexible and convenient solutions that wk f you. DISTRIBUTED BY : MGDHPC0EN 809TD/ZZZEX

2 Why Panasonic? We are making every efft to research and develop stateoftheart technology, production process technology, and quality innovation. We will provide new products that will contribute to value improvement f customers by proposing solutions. Innovative products are created together with the customer. Diverse Product Lineup Panasonic offers various Video Intercom System models to flexibly suit the size of your house and your lifestyle. Analogue Single House Histy Proud to be the No. market share holder in Japan Function/Spec Panasonic became a market leader in Japan with its Video Intercom with Wireless Monit Bell, Chime Voice Interphone Black & White Video Intercom Colour Video Intercom Video Intercom with Wireless Monit Market Share (Japan) 7% Source: Panasonic's estimate based on internal research in 0,000 Units Video Intercom with IP Touch Screen Monit Smartphone Connect,0,000 Units Remote Answering Safety/Convenience Sales& Customer Satisfaction Development Customer Production We grasp customer needs, plan products, and then proceed to develop them. Safe, reliable products are manufactured under strict quality control. In addition, customer service and products that truly fit customer needs, earning us high acclaim in wld markets IP Dedicated to the Customer Centric Policy Everything we do is f our customers Stylish Design and Rich Features Wireless IP Video Intercom SIP Phone Wide angle & PTZ We precisely grasp customer needs by asking f opinions, and then we create ideas in response. Our passion f developing truly great products helps to bring shape to these ideas. Developing these into the next product Understand usage condition Analysis of context of use Web survey Analysis of the situation of product returns Understand usage condition demand Verification Technical trend analysis Idea planning Market surveys Assessment by users/home Monit tests Commercialization Redeveloping results into the new products Customer opinions are sought both befe and after our products are launched, in an efft to offer the best possible products. Monit testing is also conducted at the prototype stage. If assessments do not meet expectations, further improvements are made. Pic. & SDcard rec Voice changer No, thank you! High Quality Products Low failure rates Numerous safety test items Highreliability tests Userfriendly & multilingual UI No, thank you! Easy installation (non polar, wire) Photos are f illustrative purposes only. 3

3 Product Lineup Comparison Chart Stylish Premium DECT Wireless Series VLSWD50 x Main Monit: VLMWD50 x : VLV55 x Wireless Sub Monit: VLWD3 Smartphone Connect Series VLSVN5 x Main Monit: VLMVN5 x : VLV555 Model Number VLSWD50 VLSVN5 Maximum Connectable Units (phone) (DieCast Aluminium) (DieCast Aluminium) Main Monit Wireless Sub Monit (DECT) Smartphone, Tablet ()* Recding Video / Picture Recding / / Connectable Devices SD Card Recding Sens Camera () Electric Lock Release ( Opener) ()* () Repeater () Others Night Vision (LED Light) Touch Panel / Pan & Tilt / / Wide Angle Camera H: 70 V: 5 H: 70 V: 30 Intercom Call Voice Changer * The main monit must be on the same home wireless netwk as a smartphone/tablet (with the dedicated app installed). * When connecting 3 s, an optional is required. Compatibility of Main Monit, Wireless Monit and Please contact your nearest Panasonic dealer f sales infmation. = Connectable = Connectable (same as packaged combination) x = Not connectable Main Monit (Package No.) Extension Monit VLMN000 Wireless Sens Camera VLWD8 (DECT) VLWD3.inch Wireless Sub Monit (DECT) VLFKD Repeater VL55/ VLV55U.0 M pixels VLV M pixels IP Module type Analogue IP VN500.3 M pixels VLVM Series.0 M pixels VLV90.0 M pixels VLVN900.0 M pixels Display size VLMWD50 (VLSWD50) VLPS0 5inch WVGA colour /Touch Panel up to up to up to (*) VLMVN5 (VLSVN5) VLPS0 5inch WQVGA colour smartphone connect model VLMV0 Buspowered type 3.5inch QVGA colour VLMV VLPS0 3.5inch QVGA colour VLMN000 PoE PoE VLPS0(*) 7inch WVGA colour /Touch Screen up to 5 VLMN000 * The image quality may be lower than that of the included in the package, but this is not a malfunction. * (VLPS0) is sold separately. 5

4 Stylish Premium DECT Wireless Series Smartphone Connect Series Wireless Video Intercom System Video Intercom System VLSWD50 VLSVN5 5inch Wide Screen 5inch Wide Screen * * VLV55 Main Monit VLMWD50 Wireless Monit VLWD3 * Easy installation by simply replacing existing dobell unit Nonpolar wire system. Touch Panel The wireless design means that there is no troublesome wiring required when adding on to the system as well. You can add on up to sub monits and DECT Wireless Sens Cameras f large homes, and easily confirm visits from a monit in each room. Main Monit VLMVN5 * Easy installation by simply replacing existing dobell unit Nonpolar wire system. DECT Wireless VLV555 Smartphone Connect* The main monit has a 5inch wide screen that clearly shows each visit's face. If it is difficult to see, simply touch the screen to activate an approximate x zoom hizontally and vertically. This makes it easy f everyone to see, and provides an easytouse operating screen. You can use your smartphone tablet as a sub monit to respond to visits and unlock electric locks no matter where you are in the home. You can also monit dophone images when you want to check the do entrance. Other Features SD Card Recding You can automatically recd video images of visits while you're away from home. It will recd up to 3,000 visits (30 seconds per visit). And you can save and play the images on a PC that has an SD card slot. WideAngle Camera (Hizontally:70, Vertically:5 ) Wireless Sens Cameras Connectable Night Vision (warm white coloured LED lights) Voice Changer Intercom Call (between main monit and sub monit) Moniting Wireless Netwk Connection Electric Lock Release Suppt : AC V A / DC V A In addition to smartphones/ tablets, the main monit can also wirelessly connect to the w ireless router f easy connections without a cable. Internet VLMVN5 Wireless netwk Router Modem Mobile devices Options (phone) VLV55 (Surface mount) VLV55U (Flush mount) CMOS.0 M pixels Flush Mounting Box VLMB55 Wireless Monit (Sub Monit) VLWD3 Wireless Sens Camera VLWD8 DECT Repeater VLFKD The main monit can send with a time stamp and image of visits to addresses registered in advance, enabling you to check who has visited when you are outside the house (even when you are overseas). Other Features Answer Visits and Unlock the Electric Locks Notification* Related Product Options Main Monit (Main Monit) (phone) VLV555 (Surface mount) CMOS 0.3 M pixels VLMWD50 Suppts ios and AndroidTM (free application)* iphone 5 and later, ipad (ios 7.0 later) Android smartphones and tablets (Android.0 later) Electric Lock Release Suppt: VLRLY ( V AC/DC, less than A) Picture Recding ( 50 visits (up to 8 still images per visit)) WideAngle Camera (Hizontally:70, Vertically:30 ) Night Vision (white coloured LED lights) Voice Changer * Some mobile devices may not be compatible. * F the latest infmation about the app and compatible devices, visit the following website. (phone) VLV55 (Surface mount) CMOS.0 M pixels * The main monit must be on the same home wireless netwk as a smartphone/tablet (with the dedicated app installed). It is also necessary to run the dedicated app in der to receive visit's calls on a smartphone/tablet. * To use this function, a main monit with sender infmation registered must be connected to the internet. may not be able to be sent, depending on the condition of the netwk. 7

5 VLSWD50 Model Composition VLSWD50 VLMWD50 x VLV55 x VLWD3 x VLSWD50U VLMWD50 x VLV55U x VLWD3 x Weight VLMWD50 Main Monit (Main monit) 5 80 supply unit (VLPS0) V DC, 0.5 A (VLPS0 supplied) Standby: Approx.. W Operating: Approx. 0 W 80 x 5 x mm 70 g Ambient temperature: Approx. 0 C to +0 C VLV55 (Surface mount) VLV55U (Flush mount) (phone) Supplied by the main monit 0 V DC, 0.3 A Main body 5 30 VLWD3 Wireless Monit (Sub monit) 73 Rechargeable NiMH (AAA x ) VLV55: 9 x 8 x 30 mm VLV55U: 9 x 8 x.5 mm (excluding sections embedded into the wall) VLV55: 05 g VLV55U: 35 g Ambient temperature: Approx. 5 C to +55 C (tested up to 0 C) Charger AC adapt Output: 5.5 V DC, 0.5 A Standby: Approx. 0. W (when the sub monit is not placed in the charger) During charging: Approx.. W 73 x 5 x 30 mm 3 x 8 x 7 mm 0 g (including the batteries) 70 g (excluding the AC adapt) Ambient temperature: Approx. 0 C to +0 C Ambient temperature: Approx. 0 C to +0 C Display 5inch wide colour / WVGA (800x80 pixels).inch colour / QVGA (30x0 pixels) Display language English, French, German, Spanish, Italian, Dutch (VLMWD50FX: English, Polish, Romanian, Hungarian) Depends on main monit Talking method Handsfree Handsfree Handsfree Frequency range.88 GHz to.90 GHz.88 GHz to.90 GHz Transmitting range Option output (A contact) Viewing angle Rated load: V AC/DC, 0.3 A lower Minimum applicable load: 5 V DC, 0.00 A (Output when there is a call from the dophone) Approx. 00 m (lineofsight distance from the main monit) Hizontally: Approx. 70 Vertically: Approx. 5 Image sens / camera (pixel) CMOS sens (Approx..0 M pixels) Minimum illuminance required lx (within approx. 50 cm from the camera lens) Lighting method Warm white coloured LED lights IP rating / IK rating IP5 * / Compliant with IK07 Installation method Wall mount (mounting bracket supplied) VLV55: surface mount (mounting base supplied) VLV55U: flush mount (flush mounting box supplied) External material Flame retardant ABS and PS resin Aluminium and flame retardant resin ABS resin ABS resin VLSVN5 Model Composition VLSVN5 VLMVN5 x VLV555 x VLMVN5 VLV555 VLPS0 VLRLY Main Monit (Main monit) (phone) Relay Box supply unit (VLPS0) V DC, 0.5 A Standby: Approx..8 W Operating: Approx. 0 W Supplied by the main monit 00 5 Input: 00 V AC, 0. A (50/0 Hz) Output: V DC, 0. A Supplied by the main monit 8 x x 3.5 mm 9 x 8 x 30 mm x 00 x 5 mm 9 x 78 x 38 mm Weight 85 g 395 g 30 g 30 g Ambient temperature: Approx. 5 C to +55 C Ambient temperature: Approx. 0 C to +0 C (tested up to 0 C) Ambient temperature: Approx. 0 C to +50 C (indo use only) Ambient temperature: Approx. 0 C to +0 C Display 5inch wide colour / WQVGA (80x7 pixels) Display language English, French, German, Spanish, Italian, Dutch (VLMVN5FX: English, Polish, Romanian, Hungarian) Talking method Handsfree Handsfree Wireless transmission method IEEE 80. b/g/n. GHz Viewing angle Hizontally: Approx. 70 Vertically: Approx. 30 Image sens / camera (pixel) CMOS sens (Approx. 0.3 M pixels) Minimum illuminance required lx (within approx. 50 cm from the camera lens) Lighting method White coloured LED lights IP rating / IK rating IP5 * / Compliant with IK07 Installation method Wall mount (mounting bracket supplied) Surface mount (mounting base supplied) Flush mount (flush mounting box sold separately)) Wall mount attach to DIN rail Wall mount attach to DIN rail External material Flame retardant ABS and PS resin Aluminium and flame retardant resin Flame retardant PC+ABS resin Flame retardant ABS resin * Water resistance is only assured if the dophone is installed crectly accding to the instructions in the Operating Instructions, and appropriate water protection measures are taken. Comparison of the wiring Options VLSWD50 VLSVN5 0 VLWD8 (F VLSWD50) VLFKD (F VLSWD50) Wireless Sens Camera (VLPS0) DECT Repeater VLV55 AC/DC AC/DC VLMWD50 VLV555 VLRLY VLMVN5 9 supply unit (VLPS0) V DC, 0. A During standby: Approx..5 W Operating: Approx..5 W (when the LED lights are not lit), Approx. 8 W (when the LED lights are lit) 0 x 8 x 90 mm (when the camera is front facing and including the wall mount bracket) Input: 00 V AC, 0. A (50/0 Hz) Output: V DC, 0. A AC adapt Output:.5 V DC, 0.5 A During standby: Approx..5 W Operating: Approx..3 W (when transmitting) x 00 x 5 mm 8 x x 39 mm Weight 90 g 30 g 88 g (excluding the AC adapt) Ambient temperature: Approx. 0 C to +50 C Ambient temperature: Approx. 0 C to +50 C (indo use only) Ambient temperature: Approx. 0 C to +0 C Frequency range.88 GHz to.90 GHz.88 GHz to.90 GHz Transmitting range Approx. 00 m (lineofsight distance from the main monit) Approx. 00 m (lineofsight distance from the main monit) Angular field of view (camera angle) Hizontal: Approx. 53 Vertical: Approx. Image sens 0.3 M pixels CMOS Minimum illuminance required lx * Lighting method white coloured LED lights *3 Sens detection range Heat sens (when the surrounding temperature is approx. 0 C) Hizontal: Approx. 3, vertical: Approx. 0, detection range: Approx. 5 m Motion detection sens Hizontal: Approx. 53, vertical: Approx. Sens detection method Pyroelectric infrared sens (heat sens) and motion detection Adjustable mounting angles Hizontal: ±90, vertical: facing fward facing down approx. 0 (adjustable when mounting) Heat sens adjustable angles Manually adjustable to angles IP rating IP5 * Installation method Wall mount (wall mount bracket supplied) Wall mount attach to DIN rail External material PC+ABS resin Flame retardant PC+ABS resin PS resin * Water resistance is only assured if the dophone/the camera is installed crectly accding to the instructions in the Installation Guide, and appropriate water protection measures are taken. Do not install the camera in areas directly exposed to water rain. * The minimum illuminance required when the camera s [Brightness] setting is set to [+3]. *3 Approx. 8.5 lx when 3 m in front of the camera, and approx. lx when 3 m away and 0 to the left right of the camera. * * AC/DC AC/DC (Optional ) * When connecting 3 Elocks, an optional is required. * Devices that can be connected to the option output: dobell light, do chime, rotating light, etc. *3 Option inputs can be used to connect senss. Option output * (A contact) AC/DC AC/DC (Optional ) PBX : Electric lock Option input x *3 (A contact) : (included with a monit) 8 9

6 Video Intercom Multi System Specifications Composition f Small Size Apartment Flush mount (Small type) Flush mount (Large type) Surface mount (Small type) Surface mount (Large type) VLVM0 x pcs. VLVM0 x pcs. VLVM0 x pcs. VLVM0 x pcs. VLVM30 x pcs. VLVM30 x pcs. VLVM30 x pcs. VLVM30 x pcs. VLVM0 x pcs. (Small type) VLVM03 x pcs. (Large type) VLVM0 x pcs. (Small type) VLVM03 x pcs. (Large type) VLVM50 x pcs. (Small type) x 30 x 9 mm* 35 x 30 x 9 mm* VLVM503 x pcs. (Large type) 33 x 35 x 89 mm x 35 x 89 mm Weight kg Module Lineup VLVM0 VLVM30 VLVM30 VLVM303 VLVM30 VLVM90 VLVM90 Button Module Button Module 3Button Module Button Module Blank Panel VIGIK Panel Weight VLVM80 No VLVM03 VLVM50 VLVM503 Back Box (Small type) Back Box (Large type) Surface Mount Cover (Small type) Surface Mount Cover (Large type) x 30 x 59 mm VLVM50 / VM503 VLVM0 / VM03 VLPS0 VLVM70 VLV703 Surface Mount Cover (Small type / Large type) Back Box (Small type / Large type) (.5A type) Distribut x 3.5 x 88 mm 3.5 VLVM0: 70 g VLVM03: 930 g VLVM50: 355 g Ambient temperature: Approx 5 C to +55 C, Relative humidity (noncondensing): 90 % Aluminium and Steel (SPCC) Stainless steel (SUS30) VLVM0 VLVM30/30/303/30 VLVM90 VLVM90 Camera Module Button Module Blank Panel VIGIK Panel 90.5 x 7.5 x 5.5 mm 7.5 x 7.5 x 0 mm x 7.5 x 5 mm x 7.5 x mm* Weight 35 g Main Features 0 g Easytosee and use call buttons A flexible system that accommodates up to 3 rooms can be designed by combining call button modules. The large call buttons with integrated nameplate and backlight make it visible in the dark and enhance its operability and visibility. 50 g Handsfree Hizontally: Approx. 70 Vertically: Approx. 0 IP55* / Compliant with IK08 lx (within approx. 50 cm from the camera lens) Lighting method White coloured LED lights External material Aluminium (partially PC and ABS) Aluminium (partially PC and ABS) Aluminium Aluminium (partially ABS) VLPS0 VLPS0 VLVM70 VLV703 (0.A type) (.5A type) Distribut x 00 x 5 mm x 0 x 58 mm Weight External material While our unique frontaccess nameplates are easily removed by hand, front access can also be prohibited with screws. Its compact design allows it to be installed in a variety of locations. Weight Display External material Pan, Tilt, Zoom 0 Supply Unit (included) supply unit (VLPS0) V DC, 0.A Refer to Estimate on the second page Standby: Approx..5 W Operating: Approx..5 W 30 g 530 g 0 g Flame retardant PC+ABS resin VLMV0 Monit g ABS (flame retardant ABS resin) Ambient temperature: Approx 0 C to +50 C, Relative humidity (noncondensing): 90 % ABS (flame retardant ABS resin) Installation Position and Camera Range 5 Side view Image range Approx. 0 Refer to Estimate on the second page 70 g Ambient temperature: Approx. 0 C to +0 C, 3.5inch colour / QVGA (30x0 pixels) Flame retardant ABS (f ) with 3 mode PAN (f VLVM0) Expanded interface bell input, A contact output Top view (view when looking from above) Supplied by the bus line (from a distribut a lobby station) Moniting outside HAC (Hearing Aid Compatibility) 08.5 supply unit (sold separately): VLPS0 (V DC, 0.A) VLPS0 (V DC,.5A) Suppted functions Electric lock release suppt 5.5 Input: 00 V AC, A (50/0 Hz) Output: V DC,.5 A Flame retardant PC+ABS resin 9 x 30 x 5 mm 08.5 x 0 x 5.5 mm Ambient temperature: Approx. 0 C to +50 C Ambient temperature: Approx 0 C to +50 C, Ambient temperature: Approx 0 C to +55 C, (indo use only) Relative humidity (noncondensing): 90 % Relative humidity (noncondensing): 90 % 33 x 0 x 5 mm 0 5 Input: 00 V AC, 0. A (50/0 Hz) Output: V DC, 0. A Compact design Compliant with IP55**3 / Compliant with IK08*3 Front access name plate 75 g (/ inch) CMOS sens (approx..0 M pixels) Minimum illuminance required Freely mix and match Ambient temperature: Approx 5 C to +55 C, Relative humidity (noncondensing): 90 % IP rating / IK rating Image sens View angle VLVM503: 5 g Ambient temperature: Approx 5 C to +55 C, Relative humidity (noncondensing): 90 % VLPS0 Talking method (0.A type) x 3.5 x 88 mm External material Extension Cable ( m, 5 g) 35 x 30 x 59 mm kg VLVM0 0 Camera Module 5 35 Refer to Estimate on the second page HAC (Hearing Aid Compatibility) 88.7 kg supply unit (sold separately): VLPS0 (V DC, 0.A) VLPS0 (V DC,.5A) kg Centre of the Camera lens Approx. 50 mm Approx. 00 mm Approx. 70 Approx. 500 mm Approx. 500 mm Approx. 500 mm Approx. 750 mm Yes (VLMV0EX only) * Excluding sections embedded into the wall. * Water resistance is only assured if the product is installed crectly accding to the instructions in the Operating Instructions, and appropriate water protection measures are taken. *3 When a VIGIK module is installed, the rating does not include the VIGIK module.

7 Bus Wiring Starshaped Wiring 8 # Distributs 3 Distribut #8 VLVM70 Units #3 # #5 # #3 #3 #3 3 Units #30 #9 #7 # #0 # # #3 # Distribut # VLVM70 #5 # VLPS0 #9 #8 #7 * VLPS0 Wiring distance: Monit 00 m (ø0.5 mm) / 00 m (ø.0 mm) (VLPS0) 0 m (ø0.5 mm) / 0 m (ø.0 mm) (VLPS0) 50 m (ø0.5 mm) / 00 m (ø.0 mm) Estimate (F Starshaped Wiring) VLV703 * Monit VLPS0 (0.A) VLPS0 (.5A) (Unit: pcs.) ~ 5~3 This is an estimate of a minimal configuration. The actual configuration depends on the installation environment/conditions. s # # #3 # #5 # Monit Lineup VLMWD50 Bell VLPS0 VLPS0 Wiring distance: Farthest Distribut Distribut (VLVM70)*3 Monit* (VLPS0) (VLPS0) (VLPS0/PS0) Distribut VLPS0 ~ 5~8 9~ 3 VLPS0 00 m (ø0.5 mm) / 00 m (ø.0 mm) 00 m (ø0.5 mm) / 00 m (ø.0 mm) 0 m (ø0.5 mm) / 0 m (ø.0 mm) 50 m (ø0.5 mm) / 00 m (ø.0 mm) 0 m (ø0.5 mm) / 0 m (ø.0 mm) Estimate (F Bus Wiring) Monit Distribut VLVM70 VLPS0 VLPS0 VLPS0 VLPS0 VLMV0 VLV55 3~ 7~0 5 ~ 5~8 7 Bell Source Supplied by the bus line a lobby station NP: NonPolar : Wireless Monit VLWD3 * If the system consists of VLPS0 and 5 me distributs are used, connect wiring from the VLPS0 to the st and 5th distributs. * A (VLPS0) is included with the (VLV703). *3 Distribut connected to power supply unit (when using VLMV0) * Farthest monit (when using VLMV0) * When a VLMV0 is connected using VLPS0 power supply unit 9~3 8 VLMV0 (Unit: pcs.) Excludes quantity of s used by s. This is an estimate of a minimal configuration. The actual configuration depends on the installation environment/conditions. Option output * (A contact) Option output * (A contact) Wireless Sens Camera VLWD8 VLMVN5 Components Surface Mount VLV555 VLMVN5 : * * *3 * A is included with the monit. Devices that can be connected to the option output: dobell light, do chime, rotating light, etc. A Relay Box (VLRLY) is NOT included with the monit (VLMVN5). Option inputs can be used to connect senss. Wireless router (Unit: pcs) Number of call buttons VLVM0 VLVM30 VLVM30 VLVM303 VLVM30 VLVM90 VLVM50/VM503 * VLVM0/VM03 VLVM80 VLMWD VLVM503: () VLVM03: 3 VLVM503: () VLVM03: VLVM50: () VLVM0: VLVM50: () VLVM0: VLRLY*3 Smartphone * 0 mm me When the surface mount installation method is used to install s sidebyside, a gap of 0 mm me is required. Option input * (A contact) *The surface mount cover cannot be attached when the lobby station is flush mounted. However, make sure to use the surface mount cover when the lobby station is surface mounted. 3

8 One Panasonic Solution Greater peace of mind with interconnected Panasonic IP products IP Video Intercom IP Video Intercom System f Apartment Complexes SIP Phone Communication SIP Phone / Netwk Camera Moniting Main Features VLVN900 Pure IP lobby station with a colour LCD monit and wideangle camera. Elegant design and durable structure with a metallic panel. 3.5inch colour LCD monit (30x0 pixels) Displays the resident's name Onscreen user guidance Wide angle camera Wide view of 0 degrees (hizontal), 7 degrees (vertical) Mechanical adjustment (up to +/ 5 degrees vertically).0 M pixels provide a clear image Elock unlocking function Unlock the public do by using an IC card (Builtin MIFARE RFID) Unlock the public do by using a PIN code f each residence Other Features Strong and elegant exteri with an aluminium panel IP55, compliant with IK07 Phonebook (No., Resident s names) Theft detection buzzer Monit VLMN000 Pure IP room monit with 7inch wide LCD and touch screen. Main Features 7inch wide LCD with capacitive touch screen Provides a clear image on the wide screen Accurate and smooth operation via a capacitive touch screen IP camera monit various areas using a Panasonic Netwk Camera (Suppted devices: Panasonic ipro series, Eseries) Standard PoE is suppted can be supplied via Ethernet cable (PoE) also available (VLPS0 is sold separately) Other Features Video messages from the : up to most recent 50 Manual recding (videos): up to most recent 50 Auto/manual recding (still images): up to most recent 00 Elock unlocking (both individual and public dos) 5 sens inputs (emergency/urgency button and other senss) and do bell input Recommended ModelNo. * KXHDV30 (Video and Audio) KXHDV30 (Audio) KXHDV30 (Audio) Main Features VLVN500 Pure IP do station with a wideangle camera and RFID reader. Simple and sleek design. Wideangle camera Wide view of 3 degrees (hizontal), 9 degrees (vertical).3 M pixels provide a clear image Elock unlocking function Unlock the individual dos by using an IC card (Builtin MIFARE RFID) * Relay box is required when connecting an Elock to the do station. (VLRLY is sold separately) Standard PoE is suppted can be supplied via Ethernet cable (PoE) also available (VLPS0 is sold separately) Other Features Night vision with white coloured LED lights Theft detection buzzer Operation Specification Codec Fmat: H. (Fixed) Image Resolution: 70p (80x70 pixels) less Frame Rate: 0 fps less Recommended Models * Eseries, ipro series VLVN devices* are suppted. Panasonic SIP Phone is available in the system. * Includes setup tool f mass configuration of 000 devices Main Features Embedded SIP server Suppts 000 SIP devices (,, Monit and Panasonic SIP Phone) Voice mail Voice mails can be issued by the SIP Phone to each room grouped rooms Other Features notification* Even if the guard is out, voice mails from residents to the guard station (SIP Phone) can be fwarded via , enabling quick access to imptant voice mail * External mail server and an internet connection are required. 5

9 System Diagram of the Apartment System Suppt up to 00 devices on a system without a Suppt up to,000 devices on a system with a FUNCTION FUNCTION 00 SIP devices are suppted Multiple sessions are suppted Send text mail from control room to all monits Easy setup by PC tool,000 SIP devices are suppted Multiple sessions are suppted notification Send voice mail from control room to all monits Easy setup by PC tool Site Entrance Parking Common Area Common Area Entrance Parking Common Area Entrance Parking Supply U Switch Guard Guard SIP Phone Common Area Switch Switch Common Area SIP Phone PC PC Switch Switch * Elock f requires Relay Box (Sold separately. ModelNo. VLRLY) 7

10 Analogue Video Intercom System f Apartment Complexes VLV70 Lift Controller VLV70 VLV703 Functions as a distribution box repeater. The function can be switched with a DIP switch. Controlling the destination of lifts Controlling the destination (flo) of visits by linking with the lift and lift control box. Device f extending the lobby stations and control boxes. Role as a distribution box Suppted control methods Features A distribution box f connecting the control box with the main monit of each room. Role as a repeater box A repeater box f amplifying the signal when the control box and main monit are far away from each other. Only one can be connected between the control box and distribution box #0. : control (Relay signalling) Binary control * The suppted control method depends on the specifications of the lift and lift control box. Contact the lift manufacturer f details. Extend lobby stations / control boxes lobby stations control boxes Features VLV90 phone f the public entrance of housing complexes. Destination display, calling, conversation, electric lock Guidance (simple usage f visits) Wide angle camera : Hizontally: approx. 70 Vertically: approx. 0 Heat sens: The backlight of the display and buttons are turned on when a visit is detected..3inch LCD / white backlit LCD Blue / Amber LED backlit buttons White coloured LED lights f night colour vision Unlock with PINcode number and name registration owner name display Connectable devices Security camera Electric lock Access controller VLV700 Device f controlling the entire system Features Easy setup ( number registration) Easy connection check (Check connections between the control box and main monit of each room) Real time moniting Log (SD card recding) Text log: Me than 90,000 items (date, caller, receiver, operation, status) Image log: 90,000 images (overwrite save) (visits call) Connectable devices PBX PC (f program settings) Monit (f real time moniting) Main Monit Line Up VLMVN5 supply unit (VLPS0) V DC, 0.5 A Standby: Approx..8 W Operating: Approx. 0.0 W VLMV supply unit (VLPS0) V DC, 0.5 A Standby: Approx.. W Operating: Approx. 8.0 W 8 x x 3.5 mm 9 x 9 x 9 mm Weight 85 g 330 g Ambient temperature: Approx. 0 C to +0 C Display 5inch wide colour / WQVGA (80x7 pixels) 3.5inch colour / QVGA (30x0 pixels) Display language English, French, German, Spanish, Italian, Dutch (VLMVN5FX: English, Polish, Romanian, Hungarian) English Frequency range IEEE 80. b/g/n. GHz Installation method Wall mount (mounting bracket supplied) External material Flame retardant ABS and PS resin Flame retardant ABS resin Suppted functions station bell VLPS0 ( ) do station input (VLV55/V55U, VLV555) do bell input Electric lock release suppt (f individual x *, f public x ) Picture recding 00 images (up to 50 visits (up to 8 still images per visit)) do bell input (f public x ) 30 images (up to 30 visits, shot per visit) Voice changer Yes Pan, Tilt, Zoom Pan, Tilt, Zoom (f VLV90, VLV55/V55U, VLV555) Smartphone connect notification * Other functions Guard call Monit security camera Emergency call Guard call *3 Monit security camera Emergency call *3 * The optional VLRLY is required. * The main monit must be connected to a wireless router that is connected to the Internet in der to use feature. *3 Either one can be connected. VLPS0 ( ) 8 9

11 Basic System Monit Lineup Expanded System f Multi building Each Branch connects up to 0 es Each connects up to 0* Units (* units: up to 50 f each control box) 50 0 Bell es per Branch #0 #~#0: Standard mode Units VLMVN5 VLV700,0 Units VLV703 VLV # 50 #9 # # VLV700 # Your Smartphones Sens V DC supply unit (supplied) Bell VLV70 # 0 Repeater VLV70 Gym # # es Units VLV703 5 Reception V DC supply unit (supplied) * s # # # VLV70 Bell 50 Units Monit * SOS Repeater Units per 50 Security VLMV VLV703 # # VLV70 * Either one can be connected. bell connect to the option input * Either one can be connected. Gate VLV70 Expanded System f Large scale building There are restrictions* on the system Bell # 50 VLV700 Units # VLV70 VLV70 50 VLV700 Branch x Branch Branch3 Branch Branches VLV VLV700 SD Card (sold separately) Units x Units Coax (NTSC) # Coax (NTSC/PAL) # Security Camera VLV90 VLV90 VLV90 es do not operate as repeaters that allow longer distances between the Control Box and s. s (VLV90) connected to es (VLV703) cannot be called from the main monits terminals. Wiring Distance Lift Controller () The farthest (Standard Mode) (Standard Mode) Main Monit es Units VLV703 # # Terminal up to via PBX system Reception Lift:up to 3 Gym VLV90 Gate 5 * s VLV90,0 Units * * There are usage restrictions when connecting me than 9 s. Consult your certified Panasonic dealer f me infmation. * When a visit calls a resident from the on a system with multiple es installed in one building, even though there is only one building, the visit needs to enter the building number befe entering the room number. *Use PE (polyethylene)insulated cables. Wiring run Extension Box Security VLV70 Gate :up to 3 (without ) up to 8 (with ) :up to 3 ( s can be connected to each.) Gym Access Controller PBX VLV70 Security PBX Lift Controller Reception 50 VLV700 VLV70 Monit Lift Controller VLV703 s 0 SOS VLV700 VLV703 PBX #9 VLV70 VLV90 Wireless router Units x x 8 VLRLY Bell Units VLV70 Main monit * VLV70 Bell #0 VLV700 Wire diameter 0.5 mm ( AWG). mm (7 AWG) 00 m 00 m 00 m 00 m 00 m 00 m Wiring run (Repeater Mode) (Repeater Mode) The farthest (Standard Mode) The farthest Lift Controller Wire diameter 0.5 mm ( AWG). mm (7 AWG) 00 m 00 m 00 m 00 m 00 m 00 m (VLPS0) SOS Emergency Button

12 VLVN900 series (IP Video Intercom System f Apartment Complexes) VLV90 series (Analogue Video Intercom System f Apartment Complexes) VLVN900 VLVN500 VLMN000 Monit (included item) VLVN790 (Mounting box) Flush mount box VLPS (sold separately) Flush mount box (included item) VLV90 (VLPS0) 00 5 supply unit (VLPS0) V DC, 0. A Standby: 3.5 W, Operating: 8.5 W PoE (IEEE 80.3af compliant, Class device) supply unit (VLPS0 *3 ) V DC, 0. A PoE: Standby:.5 W / Operating: 5. W VLPS0: Standby:. W / Operating:.3 W PoE (IEEE 80.3af compliant, Class device) supply unit (VLPS0 *3 ) V DC, 0. A PoE: Standby:.9 W / Operating:.3 W VLPS0: Standby:. W / Operating:. W 373 x 79 x mm (excluding sections embedded into the wall) x 00 x 8.5 mm 37.5 x 05 x 7.8 mm Weight.5 kg 50 g 550 g Ambient temperature: Approx. 0 C to +55 C Ambient temperature: Approx. 0 C to +55 C Ambient temperature: Approx. 0 C to +0 C Display 3.5inch colour display (30x0 pixels) 7inch wide colour display with touch screen (800x80 pixels) Display language English, Arabic, French, Italian, German, Spanish and Dutch Only user guidance suppts multiple language English, Arabic, French, Italian, German, Spanish and Dutch Resident s names are only in English Talking method Handsfree Handsfree Handsfree Netwk interface 0BASET/00BASETX (Auto MDI/MDIX) 0BASET/00BASETX (Auto MDI/MDIX) 0BASET/00BASETX (Auto MDI/MDIX) Netwk protocol TCP/IP, UDP TCP/IP, UDP TCP/IP, UDP Wiring UTP (cat.5e higher) UTP (cat.5e higher) UTP (cat.5e higher) Card reader (RFID) * 3.5 MHz (ISO/IEC 3 Type A (MIFARE)) 3.5 MHz (ISO/IEC 3 Type A (MIFARE)) Expanded interface Suppt f electric lock releasing (entrance unlocking) x Elock x *Relay box VLRLY is required (sold separately) Sens input x 5 (including emergency / urgency button) Viewing angle Hizontally: Approx. 0, Vertically: Approx. 7 (5 angle adjusting, vertical only) Hizontally: Approx. 3, Vertically: Approx. 9 Image sens.0 M pixels CMOS sens.3 M pixels CMOS sens Minimum illuminance required lx (within approx. 50 cm from the camera lens) lx (within approx. 50 cm from the camera lens) Lighting method White coloured LED lights White coloured LED lights SIP server Embedded SIP server (up to 00 devices) Video / Audio fmat Video: H., Audio: G.7 Video: H., Audio: G.7 Video: H., Audio: G.7 IP rating / IK rating IP55 * / Compliant with IK07 IP5 * / Recding Internal memy (video with audio can be saved) Installation method Surface mount (mounting bracket supplied) Flush mount (flush mounting box supplied) Surface mount (mounting base supplied) Flush mount (mounting box VLVN790 sold separately) External material Aluminium PC+ABS resin PC+ABS resin Suppted functions numbers using numbers 0 through 9 and letters A through F Phonebook (No., Resident s name) Theft detection buzzer Unlock lobby do via a PIN code RFID card (MIFARE) Reception mode Display a BMP file set by the user (30x80 pixels) Unlock individual dos via the RFID card (MIFARE) Theft detection buzzer Moniting through the IP camera Emergency / Urgency call, Sens, bell Intercom calls between monits (family neighbours) Calls to SIP Phones (guard station, reception, etc.) Register up to 3 IP cameras per monit * Register up to 8 SIP Phones per monit *5 Options VLVN700 VLPS0 VLRLY Relay Box V AC, A, 50/0 Hz Input: 00 V AC, 0. A (50/0 Hz) Output: V DC, 0. A Supplied by the main monit Under 50 W 88 x 30 x 30 mm x 00 x 5 mm 9 x 78 x 38 mm Weight.5 kg 30 g 30 g Ambient temperature: Approx. 0 C to +50 C Ambient temperature: Approx. 0 C to +0 C Ambient temperature: Approx. 0 C to +0 C (indo use only) Display Display language Talking method Netwk interface 0BASET/00BASETX/000BASET (Auto MDI/MDIX) Netwk protocol TCP/IP, UDP Wiring UTP (cat.5e higher) Expanded interface Video / Audio fmat Recding Installation method Mountable to 9inch racks Wall mount attach to DIN rail Wall mount attach to DIN rail External material Front Cabinet: ABS, Lower / Upper Cabinet: Steel Flame retardant PC+ABS resin Flame retardant ABS resin Suppted functions Voice mail notification Suppts up to 000 SIP devices (embedded SIP server) * 0,000 RFID card keys can be registered to each. Each card key must be individually registered / updated ( Issue card, Lost / Found, and Delete ) to each with which it will be used. There are no batch operations to register / update card keys to multiple s at the same time. * Water resistance is only assured if lobby station/the dophone installed crectly accding to the instructions in the Operating Instructions, and appropriate water protection measures are taken. *3 VLPS0 is sold separately. * System total up to 500 IP cameras. Consult your dealer f me infmation. *5 System total up to 50 SIP phones. Consult your dealer f me infmation supply unit (VLPS0) V DC, 0. A Input: 00 V AC, 0. A (50/0 Hz) Output: V DC, 0. A Standby: Approx..9 W Operating: Approx..5 W 373 x 79 x.5 mm (excluding sections embedded into the wall) x 00 x 5 mm Weight.0 kg 30 g Ambient temperature: Approx. 0 C to +55 C Ambient temperature: Approx. 0 C to +50 C (indo use only) Display.3inch monochrome display (white backlit LCD) Display language English Talking method Handsfree Expanded interface Suppt f electric lock releasing (entrance unlocking) x VIDEOIN (recommended Panasonic security camera) x Viewing angle Hizontally: Approx. 70 Vertically: Approx. 0 Image sens (/ inch) CMOS sens (approx. M pixels) Minimum illuminance required lx (within approx. 50 cm from the camera lens) Lighting method White coloured LED lights IP rating / IK rating IP55 * / Compliant with IK07 Installation method High crosion resistant stainless steel (SUS3), partially ABS and PC Wall mount attach to DIN rail External material Stainless steel (partially ABS and PC) Flame retardant PC+ABS resin Suppted functions Guidance (simple usage f visits) Night colour vision (white coloured LED lights) Heat sens: The backlight of the display and buttons are turned on when a visit is detected Display the resident s names Unlock with PINcode 0 VLV700 VLV70 VLV70 * VLV703 / Repeater Box Lift Controller Supply Unit Supply Unit Supply Unit Supply Unit supply unit (VLPS0) V DC, 0. A supply unit (VLPS0) V DC, 0. A supply unit (VLPS0) V DC, 0. A supply unit (VLPS0) V DC, 0. A Standby: Approx. 3.5 W Operating: Approx. 3.7 W Standby: Approx.. W Operating: Approx..0 W 08.5 x 0 x 5.5 mm Standby: Approx. 0. W Operating: Approx.. W Standby: Approx..5 W Operating: Approx..5 W Weight 00 g 350 g Ambient temperature: 0 C to +50 C (indo use only) Installation method External material Log Suppted functions Save the text logs and visits images in the SD card (sold separately) Text logs: Me than 90,000 items Images: 90,000 images USB connection (provide PC application/english) date and time setting (HH:MM DD/MM/YYYY) set the room number to the monit estimate the status of the equipment in the system operation setting (terminal, pass code, and so on.) SD card (SDHC/SDXC): Log function VIDEO OUTPUT (NTSC up to ) RJ: Connect with PBX system Wall mount attach to DIN rail ABS (flame retardant ABS resin) Dip switch Mode change (Distribution mode/repeater mode) Termination setting (Nmal/Termination) ID setting (0) Suppted control methods : control (Relay signalling) Binary control Extend lobby stations / control boxes lobby stations control boxes * Water resistance is only assured if the lobby station is installed crectly accding to the instructions in the Installation Guide, and appropriate water protection measures are taken. * The suppted control method depends on the specifications of the lift and lift control box. Contact the lift manufacturer f details. 3