VIDEO INTERCOM SYSTEM LINE-UP CATALOGUE. Flexible and convenient solutions that work for you. System Configuration Example DISTRIBUTED BY :

Transcription

1 System Configuration Example Wireless Video Intercom System VL-SWD501 System Units Main Monit VL-MWD501 Wireless Monit VL-WD13 VIDEO INTERCOM SYSTEM LINE-UP CATALOGUE Bedroom 1 Do VL-V55 DECT Repeater VL-FKD Living Kitchen Den Garage Wire VL-PS0 Wireless Sens Camera VL-WD81 Electric lock Electric lock Video Intercom System VL-SVN511 System Units Main Monit Do VL-V555 Bedroom 1 Mobile Devices Living Router Kitchen Den Wire VL-PS0 Electric lock VL-RLY1 Electric lock Trademarks and registered trademarks - MIFARE is a registered trademark of NXP B.V. and is used under license. - iphone and ipad are trademarks of Apple Inc., registered in the U.S. and other countries. - Android is a trademark of Google Inc. - SD, SDHC and SDXC Logos are trademarks of SD-3C, LLC. - The software of the sub monit is based in part on the wk of the Independent JPEG Group. -VIGIK is a registered trademark of La Poste. All other trademarks identified herein are the property of their respective owners. Imptant - Safety Precaution: Carefully read the operating instructions and installation manual befe using this product. - Panasonic cannot be responsible f the perfmance of the netwk and/ other manufacturers' products used on the netwk. DISTRIBUTED BY : Flexible and convenient solutions that wk f you. MG-DHPC0EN 1809TD/ZZZ-EX1

2 Why Panasonic? We are making every efft to research and develop state-ofthe-art technology, production process technology, and quality innovation. We will provide new products that will contribute to value improvement f customers by proposing solutions. Innovative products are created together with the customer. Diverse Product Line-up Panasonic offers various Video Intercom System models to flexibly suit the size of your house and your lifestyle. Analogue Single House Histy Proud to be the No. 1 market share holder in Japan Function/Spec Panasonic became a market leader in Japan with its Video Intercom with Wireless Monit Bell, Chime Voice Interphone Black & White Video Intercom Colour Video Intercom Market Share (Japan) 7% Source: Panasonic's estimate based on internal research in 01,000 Units Video Intercom with IP Video Intercom with Wireless Monit Touch Screen Monit Smartphone Connect 1,0,000 Units Remote Answering Safety/Convenience Sales& Customer Satisfaction Development Customer Production We grasp customer needs, plan products, and then proceed to develop them. Safe, reliable products are manufactured under strict quality control. In addition, customer service and products that truly fit customer needs, earning us high acclaim in wld markets IP Dedicated to the Customer Centric Policy Everything we do is f our customers Stylish Design and Rich Features Wireless IP Video Intercom SIP Phone Wide angle & PTZ We precisely grasp customer needs by asking f opinions, and then we create ideas in response. Our passion f developing truly great products helps to bring shape to these ideas. Developing these into the next product Understand usage condition Analysis of context of use Web survey Analysis of the situation of product returns Understand usage condition demand Technical trend analysis Idea planning Market surveys Assessment by users/home Monit tests Verification Commercialization Redeveloping results into the new products Customer opinions are sought both befe and after our products are launched, in an efft to offer the best possible products. Monit testing is also conducted at the prototype stage. If assessments do not meet expectations, further improvements are made. Pic. & SD-card rec Voice changer No, thank you! High Quality Products Low failure rates Numerous safety test items High-reliability tests User-friendly & multilingual UI No, thank you! Easy installation (non polar, -wire) Photos are f illustrative purposes only. 3

3 Product Lineup Comparison Chart Stylish Premium DECT Wireless Series VL-SWD501 1 x Main Monit: VL-MWD501 1 x Do : VL-V55 1 x Wireless Sub Monit: VL-WD13 Smartphone Connect Series VL-SVN511 1 x Main Monit: 1 x Do : VL-V555 Model Number VL-SWD501 VL-SVN511 Maximum Connectable Units Do (Dophone) (Die-Cast Aluminium) (Die-Cast Aluminium) Main Monit 1 1 Wireless Sub Monit (DECT) Smartphone, Tablet () Recding Video / Picture Recding / / Connectable Devices SD Card Recding Sens Camera () Electric Lock Release (Do Opener) ()* () Repeater () Others Night Vision (LED Light) Touch Panel / Pan & Tilt / / Wide Angle Camera H: 170 V: 115 H: 170 V: 130 Intercom Call Voice Changer The main monit must be on the same home wireless netwk as a smartphone/tablet (with the dedicated app installed). * When connecting 3 s, an optional Do is required. Compatibility of Main Monit, Wireless Monit and Do Please contact your nearest Panasonic dealer f sales infmation. = Connectable = Connectable (same as packaged combination) x = Not connectable Main Monit (Package No.) Extension Monit VL-MN1000 Wireless Sens Camera VL-WD81 (DECT) VL-WD13.-inch Wireless Sub Monit Do (DECT) VL-FKD Repeater VL-55/ VL-V55U 1.0 M pixels VL-V M pixels IP Module type Analogue IP VN M pixels VL-VM Series 1.0 M pixels 1.0 M pixels VL-VN M pixels Display size VL-MWD501 (VL-SWD501) VL-PS0 5-inch WVGA colour /Touch Panel up to up to up to () (VL-SVN511) VL-PS0 5-inch WQVGA colour smartphone connect model VL-MV10 Bus-powered type 3.5-inch QVGA colour VL-MV VL-PS0 3.5-inch QVGA colour VL-MN1000 PoE PoE VL-PS0(*) 7-inch WVGA colour /Touch Screen up to 5 VL-MN1000 * 1 The image quality may be lower than that of the Do included in the package, but this is not a malfunction. * (VL-PS0) is sold separately. 5

4 Stylish Premium DECT Wireless Series Smartphone Connect Series Wireless Video Intercom System VL-SWD501 5-inch Wide Screen Video Intercom System VL-SVN511 5-inch Wide Screen Wire * Wire * Do VL-V55 Main Monit VL-MWD501 Wireless Monit VL-WD13 Do VL-V555 Main Monit * Easy installation by simply replacing existing dobell unit Nonpolar -wire system. * Easy installation by simply replacing existing dobell unit Nonpolar -wire system. DECT Wireless Touch Panel Smartphone Connect Notification * The wireless design means that there is no troublesome wiring required when adding on to the system as well. You can add on up to sub monits and DECT Wireless Sens Cameras f large homes, and easily confirm visits from a monit in each room. The main monit has a 5-inch wide screen that clearly shows each visit's face. If it is difficult to see, simply touch the screen to activate an approximate x zoom hizontally and vertically. This makes it easy f everyone to see, and provides an easy-to-use operating screen. You can use your smartphone tablet as a sub monit to respond to visits and unlock electric locks no matter where you are in the home. You can also monit dophone images when you want to check the do entrance. The main monit can send with a time stamp and image of visits to addresses registered in advance, enabling you to check who has visited when you are outside the house (even when you are overseas). Other Features SD Card Recding You can automatically recd video images of visits while you're away from home. It will recd up to 3,000 visits (30 seconds per visit). And you can save and play the images on a PC that has an SD card slot. Other Features Electric Lock Release Suppt : AC1 V-1 A / DC1 V-1 A Wide-Angle Camera (Hizontally:170, Vertically:115 ) Wireless Sens Cameras Connectable Night Vision (warm white coloured LED lights) Voice Changer Intercom Call (between main monit and sub monit) Answer Visits and Unlock the Electric Locks Wireless Netwk Connection In addition to smartphones/ tablets, the main monit can also wirelessly connect to the wireless router f easy connections without a cable. Moniting Internet Wireless netwk Router Mobile devices Modem Suppts ios and Android TM (free application)* - iphone 5 and later, ipad (ios 7.0 later) - Android smartphones and tablets (Android.0 later) Electric Lock Release Suppt: VL-RLY1 (1 V AC/DC, less than 1 A) Picture Recding ( 50 visits (up to 8 still images per visit)) Wide-Angle Camera (Hizontally:170, Vertically:130 ) Night Vision (white coloured LED lights) Voice Changer * Some mobile devices may not be compatible. * F the latest infmation about the app and compatible devices, visit the following website. Options Related Product Options Do (Dophone) VL-V55 (Surface mount) VL-V55U (Flush mount) CMOS 1.0 M pixels Flush Mounting Box VL-MB55 Wireless Monit (Sub Monit) VL-WD13 Wireless Sens Camera VL-WD81 DECT Repeater VL-FKD Main Monit (Main Monit) VL-MWD501 Do (Dophone) VL-V555 (Surface mount) CMOS 0.3 M pixels Do (Dophone) VL-V55 (Surface mount) CMOS 1.0 M pixels The main monit must be on the same home wireless netwk as a smartphone/tablet (with the dedicated app installed). It is also necessary to run the dedicated app in der to receive visit's calls on a smartphone/tablet. * To use this function, a main monit with sender infmation registered must be connected to the internet. may not be able to be sent, depending on the condition of the netwk. 7

5 VL-SWD501 Model Composition VL-SWD501 VL-MWD501 x 1 VL-V55 x 1 VL-WD13 x 1 VL-SWD501U VL-MWD501 x 1 VL-V55U x 1 VL-WD13 x 1 VL-MWD501 Main Monit (Main monit) VL-V55 (Surface mount) VL-V55U (Flush mount) Do (Dophone) VL-WD13 Wireless Monit (Sub monit) Main body Charger VL-SVN511 Model Composition VL-SVN511 x 1 VL-V555 x 1 VL-V555 VL-PS0 VL-RLY1 Main Monit (Main monit) Do (Dophone) Relay Box supply unit (VL-PS0) Supplied by the main monit AC adapt V DC, 0.5 A Rechargeable Ni-MH (AAA x ) 0 V DC, 0.3 A Output: 5.5 V DC, 0.5 A (VL-PS0 supplied) Standby: Approx. 0. W (when the sub Standby: Approx. 1. W monit is not placed in the charger) Operating: Approx. 10 W During charging: Approx. 1. W (H x W x D) VL-V55: 19 x 118 x 30 mm 180 x 15 x 1 mm VL-V55U: 19 x 118 x 1.5 mm 173 x 5 x 30 mm 3 x 81 x 7 mm (excluding sections embedded into the wall) Weight VL-V55: 05 g 70 g 10 g (including the batteries) 70 g (excluding the AC adapt) VL-V55U: 35 g Operating environment Ambient temperature: Approx. -15 C to +55 C Ambient temperature: Approx. 0 C to +0 C Ambient temperature: Approx. 0 C to +0 C Ambient temperature: Approx. 0 C to +0 C (tested up to -0 C) Display 5-inch wide colour / WVGA (800x80 pixels).-inch colour / QVGA (30x0 pixels) Display language English, French, German, Spanish, Italian, Dutch Depends on main monit (VL-MWD501FX: English, Polish, Romanian, Hungarian) Talking method Hands-free Hands-free Hands-free Frequency range 1.88 GHz to 1.90 GHz 1.88 GHz to 1.90 GHz Transmitting range Approx. 100 m (line-of-sight distance from the main monit) Option output (A contact) Rated load: V AC/DC, 0.3 A lower Minimum applicable load: 5 V DC, A (Output when there is a call from the dophone) Viewing angle Hizontally: Approx. 170 Vertically: Approx. 115 Image sens / camera (pixel) CMOS sens (Approx. 1.0 M pixels) Minimum illuminance required 1 lx (within approx. 50 cm from the camera lens) Lighting method Warm white coloured LED lights IP rating / IK rating IP5 / Compliant with IK07 Installation method VL-V55: surface mount Wall mount (mounting bracket supplied) (mounting base supplied) VL-V55U: flush mount (flush mounting box supplied) External material Flame retardant ABS and PS resin Aluminium and flame retardant resin ABS resin ABS resin supply unit (VL-PS0) Input: 0-0 V AC, 0. A (50/0 Hz) Supplied by the main monit Supplied by the main monit V DC, 0.5 A Output: V DC, 0. A Standby: Approx. 1.8 W Operating: Approx. 10 W (H x W x D) 18 x 11 x 3.5 mm 19 x 118 x 30 mm 11 x 100 x 5 mm 9 x 78 x 38 mm Weight 85 g 395 g 30 g 130 g Operating environment Ambient temperature: Approx. -15 C to +55 C Ambient temperature: Approx. 0 C to +50 C Ambient temperature: Approx. 0 C to +0 C Ambient temperature: Approx. 0 C to +0 C (tested up to -0 C) (indo use only) Display 5-inch wide colour / WQVGA (80x7 pixels) Display language English, French, German, Spanish, Italian, Dutch (FX: English, Polish, Romanian, Hungarian) Talking method Hands-free Hands-free Wireless transmission method IEEE b/g/n. GHz Viewing angle Hizontally: Approx. 170 Vertically: Approx. 130 Image sens / camera (pixel) CMOS sens (Approx. 0.3 M pixels) Minimum illuminance required 1 lx (within approx. 50 cm from the camera lens) Lighting method White coloured LED lights IP rating / IK rating IP5 / Compliant with IK07 Installation method Surface mount (mounting base supplied) Wall mount (mounting bracket supplied) Wall mount attach to DIN rail Wall mount attach to DIN rail Flush mount (flush mounting box sold separately)) External material Flame retardant ABS and PS resin Aluminium and flame retardant resin Flame retardant PC+ABS resin Flame retardant ABS resin Water resistance is only assured if the dophone is installed crectly accding to the instructions in the Operating Instructions, and appropriate water protection measures are taken. Comparison of the wiring Options VL-SWD501 VL-SVN511 VL-WD81 (F VL-SWD501) VL-FKD (F VL-SWD501) Wireless Sens Camera (VL-PS0) DECT Repeater VL-V55 VL-MWD501 VL-V AC/DC AC/DC VL-RLY1 1 9 supply unit (VL-PS0) Input: 0-0 V AC, 0. A (50/0 Hz) AC adapt V DC, 0. A Output: V DC, 0. A Output:.5 V DC, 0.5 A During standby: Approx. 1.5 W During standby: Approx. 1.5 W Operating: Approx..5 W (when the LED lights are not lit), Operating: Approx..3 W (when transmitting) Approx. 8 W (when the LED lights are lit) (H x W x D) 10 x 118 x 90 mm 11 x 100 x 5 mm 8 x 111 x 39 mm (when the camera is front facing and including the wall mount bracket) Weight 90 g 30 g 88 g (excluding the AC adapt) Operating environment Ambient temperature: Approx. 0 C to +50 C Ambient temperature: Approx. -0 C to +50 C Ambient temperature: Approx. 0 C to +0 C (indo use only) Frequency range 1.88 GHz to 1.90 GHz 1.88 GHz to 1.90 GHz Transmitting range Approx. 100 m (line-of-sight distance from the main monit) Approx. 100 m (line-of-sight distance from the main monit) Angular field of view (camera angle) Hizontal: Approx. 53 Vertical: Approx. 1 Image sens 0.3 M pixels CMOS Minimum illuminance required 1 lx * Lighting method white coloured LED lights *3 Sens detection range Heat sens (when the surrounding temperature is approx. 0 C) Hizontal: Approx. 3, vertical: Approx. 0, detection range: Approx. 5 m Motion detection sens Hizontal: Approx. 53, vertical: Approx. 1 Sens detection method Pyroelectric infrared sens (heat sens) and motion detection Adjustable mounting angles Hizontal: ±90, vertical: facing fward - facing down approx. 0 (adjustable when mounting) Heat sens adjustable angles Manually adjustable to angles IP rating IP5 Installation method Wall mount (wall mount bracket supplied) Wall mount attach to DIN rail External material PC+ABS resin Flame retardant PC+ABS resin PS resin Water resistance is only assured if the dophone/the camera is installed crectly accding to the instructions in the Installation Guide, and appropriate water protection measures are taken. Do not install the camera in areas directly exposed to water rain. * The minimum illuminance required when the camera s [Brightness] setting is set to [+3]. *3 Approx. 8.5 lx when 3 m in front of the camera, and approx. lx when 3 m away and 0 to the left right of the camera. AC/DC AC/DC (Optional Do ) When connecting 3 E-locks, an optional Do is required. * Devices that can be connected to the option output: dobell light, do chime, rotating light, etc. *3 Option inputs can be used to connect senss. Option output * (A contact) AC/DC AC/DC (Optional Do ) PBX : Electric lock Option input x *3 (A contact) : (included with a monit) 8 9

6 Video Intercom Multi Do System f Small Size Apartment Specifications Flush mount (Small type) Flush mount (Large type) Surface mount (Small type) Surface mount (Large type) Composition VL-VM101 x 1pcs. VL-VM101 x 1pcs. VL-VM101 x 1pcs. VL-VM101 x 1pcs. VL-VM30 x pcs. VL-VM30 x pcs. VL-VM30 x pcs. VL-VM30 x pcs. VL-VM0 x 1pcs. (Small type) VL-VM03 x 1pcs. (Large type) VL-VM0 x 1pcs. (Small type) VL-VM03 x 1pcs. (Large type) VL-VM50 x 1pcs. (Small type) VL-VM503 x 1pcs. (Large type) (H x W x D) x 130 x 9 mm 315 x 130 x 9 mm x 135 x 89 mm 3 x 135 x 89 mm Weight 1.3 kg 1.8 kg 1.7 kg. kg (sold separately): VL-PS10 source supply unit VL-PS0 (V DC, 0.A) (V DC,.5A) Refer to Estimate on the second page HAC (Hearing Aid Compatibility) No VL-VM0 VL-VM03 VL-VM50 VL-VM503 Back Box (Small type) Back Box (Large type) Surface Mount Cover (Small type) Surface Mount Cover (Large type) Module Lineup VL-VM101 Camera Module VL-VM301 1-Button Module VL-VM30 -Button Module VL-VM303 3-Button Module VL-VM30 -Button Module VL-VM901 Blank Panel VL-VM90 VIGIK Panel (H x W x D) x 130 x 59 mm 315 x 130 x 59 mm 33 x 13.5 x 88 mm 3 x 13.5 x 88 mm VL-VM801 Extension Cable (1 m, 15 g) Main Features Freely mix and match VL-VM50 / VM503 Surface Mount Cover (Small type / Large type) VL-VM0 / VM03 Back Box (Small type / Large type) A flexible system that accommodates up to 3 rooms can be designed by combining call button modules. VL-PS10 (.5A type) VL-PS0 (0.A type) VL-VM701 Distribut Easy-to-see and use call buttons The large call buttons with integrated nameplate and backlight make it visible in the dark and enhance its operability and visibility. Weight VL-VM0: 70 g VL-VM03: 930 g VL-VM50: 355 g VL-VM503: 5 g Operating temperature: Approx -15 humidity (non-condensing): temperature: Approx -15 humidity (non-condensing): environment Ambient C to +55 C, Relative 90 % Ambient C to +55 C, Relative 90 % External material Aluminium and Steel (SPCC) Stainless steel (SUS30) VL-VM101 VL-VM301/30/303/30 VL-VM901 VL-VM90 Camera Module Button Module Blank Panel VIGIK Panel (H x W x D) 90.5 x x 5.5 mm x x 0 mm x x 5 mm x x mm * Weight 315 g 10 g 50 g 75 g Operating temperature: Approx (non-condensing): environment Ambient -15 C to +55 C, Relative humidity 90 % Talking method - - Hands-free - View angle Hizontally: Approx Vertically: Approx. 110 IP rating / IK rating IP55 * / Compliant with IK08 Compliant with IP55 **3 / Compliant with IK08 *3 Image sens (1/ inch) CMOS sens (approx. 1.0 M pixels) Minimum illuminance required 1 lx (within approx. 50 cm from the camera lens) Lighting method White coloured LED lights External material Aluminium (partially PC and ABS) Aluminium (partially PC and ABS) Aluminium Aluminium (partially ABS) VL-PS0 VL-PS10 VL-VM701 (0.A type) (.5A type) Distribut (H x W x D) 11 x 100 x 5 mm 11 x 10 x 58 mm 133 x 10 x 51 mm x 10 x 5.5 mm Supply Unit (included) Input: 0-0 V AC, 0. A (50/0 Hz) Input: 0-0 V AC, 1 A (50/0 Hz) supply unit (sold separately): supply unit (VL-PS0) V DC, 0.A Output: V DC, 0. A Output: V DC,.5 A VL-PS0 (V DC, 0.A) VL-PS10 (V DC,.5A) Refer to Estimate Standby: Approx. 1.5 W - - on the second page Operating: Approx. 1.5 W Weight 30 g 530 g 0 g 350 g Operating environment Ambient temperature: Approx. 0 C to +50 C Ambient temperature: Approx 0 C to +50 C, Ambient temperature: Approx -10 C to +55 C, Ambient temperature: Approx -10 C to +50 C, (indo use only) Relative humidity (non-condensing): 90 % Relative humidity (non-condensing): 90 % Relative humidity (non-condensing): 90 % External material Flame retardant PC+ABS resin Flame retardant PC+ABS resin ABS (flame retardant ABS resin) ABS (flame retardant ABS resin) Front access name plate While our unique front-access nameplates are easily removed by hand, front access can also be prohibited with screws. Compact design Its compact design allows it to be installed in a variety of locations. (H x W x D) 19 x 130 x 5 mm VL-MV10 Monit Supplied by the bus line (from a distribut a lobby station) Refer to Estimate on the second page Weight 70 g Operating environment Ambient temperature: Approx. 0 C to +0 C, Display 3.5-inch colour / QVGA (30x0 pixels) External material Flame retardant ABS Suppted functions Electric lock release suppt 1 (f ) Pan, Tilt, Zoom with 3 mode PAN (f VL-VM101) Moniting outside - Expanded interface Do bell input 1, A contact output 1 HAC (Hearing Aid Compatibility) Yes (VL-MV10EX only) Installation Position and Camera Range Centre of the Camera lens Approx mm Side view Image range Approx. 110 Top view Excluding sections embedded into the wall. * Water resistance is only assured if the product is installed crectly accding to the instructions in the Operating Instructions, and appropriate water protection measures are taken. *3 When a VIGIK module is installed, the rating does not include the VIGIK module. Approx. 500 mm Approx. 150 mm Approx. 100 mm Approx. 750 mm (view when looking from above) Approx. 170 Approx. 500 mm

7 Bus Wiring Star-shaped Wiring 8 Distributs # Distribut #8 VL-VM wire, NP wire, NP #3 #31 3 wire, NP wire, NP wire, NP wire, NP wire, NP wire, NP wire, NP wire, NP wire, NP wire, NP #30 3 wire, NP wire, NP #9 #3 #7 wire, NP wire, NP wire, NP wire, NP wire, NP wire, NP wire, NP wire, NP wire, NP wire, NP # # # #0 wire, NP wire, NP wire, NP wire, NP wire, NP wire, NP wire, NP wire, NP #3 wire, NP VL-PS10 wire, NP 9 # wire, NP wire, NP 8 Distribut VL-VM701 #5 wire, NP wire, NP 7 wire, NP wire, NP wire, NP wire, NP VL-PS10 wire, NP wire, NP wire, NP wire, NP wire, NP wire, NP wire, NP * wire, NP # wire, NP #3 wire, NP # wire, NP #5 wire, NP # wire, NP s Wiring distance: Monit 100 m (ø0.5 mm) / 00 m (ø1.0 mm) (VL-PS0) 10 m (ø0.5 mm) / 0 m (ø.0 mm) (VL-PS10) 50 m (ø0.5 mm) / 100 m (ø.0 mm) Estimate (F Star-shaped Wiring) (Unit: pcs.) Monit 1~ 5~3 This is an estimate of a minimal configuration. 1 The actual configuration depends on the VL-PS0 (0.A) 1 - installation environment/conditions. VL-PS10 (.5A) - 1 Monit Lineup VL-MWD501 VL-MV10 VL-PS0 VL-PS0 VL-PS0 VL-PS0 VL-PS0 VL-PS0 Wiring distance: Farthest Distribut 100 m (ø0.5 mm) / 00 m (ø1.0 mm) Distribut (VL-VM701)* 3 Monit* 100 m (ø0.5 mm) / 00 m (ø1.0 mm) (VL-PS0) 10 m (ø0.5 mm) / 0 m (ø.0 mm) (VL-PS10) 50 m (ø0.5 mm) / 100 m (ø.0 mm) (VL-PS0/PS10) Distribut 10 m (ø0.5 mm) / 0 m (ø.0 mm) Estimate (F Bus Wiring) (Unit: pcs.) Monit 1~ 5~8 9~1 13~1 17~0 1~ 5~8 9~3 Distribut VL-VM VL-PS0 1 - VL-PS10-1 Excludes quantity of s used by s. This is an estimate of a minimal configuration. The actual configuration depends on the installation environment/conditions. NP: Non-Polar : When a VL-MV10 is connected using 1 VL-PS10 power supply unit If the system consists of 1 VL-PS10 and 5 me distributs are used, connect wiring from the VL-PS10 to the 1st and 5th distributs. * A (VL-PS0) is included with the (). *3 Distribut connected to power supply unit (when using VL-MV10) * Farthest monit (when using VL-MV10) Do Bell VL-V55 VL-MWD501 Option output * (A contact) Wireless Monit VL-WD13 Wireless Sens Camera VL-WD81 Do Bell VL-MV10 Option output * (A contact) Source Supplied by the bus line a lobby station Components Surface Mount VL-V555 : A is included with the monit. * Devices that can be connected to the option output: dobell light, do chime, rotating light, etc. *3 A Relay Box (VL-RLY1) is NOT included with the monit (). * Option inputs can be used to connect senss. (Unit: pcs) Number of call buttons VL-VM VL-VM301 1 VL-VM30 1 VL-VM303 1 VL-VM VL-VM901 3 VL-VM50/VM503 * VL-VM503: () VL-VM503: (1) VL-VM50: () VL-VM50: (1) VL-VM0/VM03 VL-VM03: VL-VM03: 1 VL-VM0: VL-VM0: 1 VL-VM *The surface mount cover cannot be attached when the lobby station is flush mounted. However, make sure to use the surface mount cover when the lobby station is surface mounted. 0 mm me When the surface mount installation method is used to install s side-by-side, a gap of 0 mm me is required. VL-RLY1 * Option input * (A contact) Wireless router Smartphone

8 One Panasonic Solution Greater peace of mind with interconnected Panasonic IP products IP Video Intercom IP Video Intercom System f Apartment Complexes SIP Phone Communication SIP Phone / Netwk Camera Moniting Main Features VL-VN1900 Pure IP lobby station with a colour LCD monit and wide-angle camera. Elegant design and durable structure with a metallic panel. 3.5-inch colour LCD monit (30x0 pixels) - Displays the resident's name - On-screen user guidance Wide angle camera - Wide view of 10 degrees (hizontal), 7 degrees (vertical) - Mechanical adjustment (up to +/- 15 degrees vertically) -.0 M pixels provide a clear image E-lock unlocking function - Unlock the public do by using an IC card (Built-in MIFARE RFID) - Unlock the public do by using a PIN code f each residence Other Features - Strong and elegant exteri with an aluminium panel - IP55, compliant with IK07 - Phonebook (-No., Resident s names) - Theft detection buzzer Monit VL-MN1000 Pure IP room monit with 7-inch wide LCD and touch screen. Main Features 7-inch wide LCD with capacitive touch screen - Provides a clear image on the wide screen - Accurate and smooth operation via a capacitive touch screen IP camera monit - Monits various areas using a Panasonic Netwk Camera (Suppted devices: Panasonic i-pro series, E-series) Standard PoE is suppted - can be supplied via Ethernet cable (PoE) - also available (VL-PS0 is sold separately) Other Features - Video messages from the : up to most recent 50 - Manual recding (videos): up to most recent 50 - Auto/manual recding (still images): up to most recent E-lock unlocking (both individual and public dos) - 5 sens inputs (emergency/urgency button and other senss) and 1 do bell input Recommended Model-No. * - KX-HDV30 (Video and Audio) - KX-HDV30 (Audio) - KX-HDV130 (Audio) Main Features Do VL-VN1500 Pure IP do station with a wide-angle camera and RFID reader. Simple and sleek design. Wide-angle camera - Wide view of 113 degrees (hizontal), 9 degrees (vertical) M pixels provide a clear image E-lock unlocking function - Unlock the individual dos by using an IC card (Built-in MIFARE RFID) * Relay box is required when connecting an E-lock to the do station. (VL-RLY1 is sold separately) Standard PoE is suppted - can be supplied via Ethernet cable (PoE) - also available (VL-PS0 is sold separately) Other Features - Night vision with white coloured LED lights - Theft detection buzzer Operation Specification - Codec Fmat: H. (Fixed) - Image Resolution: 70p (180x70 pixels) less - Frame Rate: 0 fps less Recommended Models * - E-series, i-pro series VL-VN devices* are suppted. Panasonic SIP Phone is available in the system. * Includes setup tool f mass configuration of 000 devices Main Features Embedded SIP server - Suppts 000 SIP devices (, Do, Monit and Panasonic SIP Phone) Voice mail - Voice mails can be issued by the SIP Phone to each room grouped rooms Other Features - notification* Even if the guard is out, voice mails from residents to the guard station (SIP Phone) can be fwarded via , enabling quick access to imptant voice mail * External mail server and an internet connection are required. 1 15

9 System Diagram of the Apartment System Suppt up to 00 devices on a system without a Suppt up to,000 devices on a system with a FUNCTION - 00 SIP devices are suppted - Multiple sessions are suppted - Send text mail from control room to all monits - Easy setup by PC tool FUNCTION -,000 SIP devices are suppted - Multiple sessions are suppted - notification - Send voice mail from control room to all monits - Easy setup by PC tool Residence Residence Residence Site Do Monits Do Monits Do Monits Do Monits Do Monits Do Monits 1 Do Monits Do Monits Residence Residence Residence Do Monits Do Monits Do Monits Do Monits Do Monits Do Monits Do Monits Do Monits Residence Residence Residence Do Monits Do Monits Do Monits Do Monits Do Monits Do Monits Do Monits Do Monits Common Area Entrance Parking Common Area Common Area Entrance Parking Common Area Common Area Entrance Parking Supply U Switch Switch Switch Guard Guard SIP Phone PC SIP Phone PC Switch Switch * E-lock f Do requires Relay Box (Sold separately. Model-No. VL-RLY1) 1 17

10 Analogue Video Intercom System f Apartment Complexes Lift Controller VL-V70 Functions as a distribution box repeater. The function can be switched with a DIP switch. Controlling the destination of lifts Controlling the destination (flo) of visits by linking with the lift and lift control box. Device f extending the lobby stations and control boxes. Role as a distribution box Suppted control methods Features A distribution box f connecting the control box with the main monit of each room. Role as a repeater box A repeater box f amplifying the signal when the control box and main monit are far away from each other. Only one can be connected between the control box and distribution box :1 control (Relay signalling) - Binary control * The suppted control method depends on the specifications of the lift and lift control box. Contact the lift manufacturer f details. Extend lobby stations / control boxes - lobby stations - control boxes Features Dophone f the public entrance of housing complexes. Destination display, calling, conversation, electric lock - Guidance (simple usage f visits) - Wide angle camera : Hizontally: approx. 170 Vertically: approx Heat sens: The backlight of the display and buttons are turned on when a visit is detected. -.3-inch LCD / white backlit LCD - Blue / Amber LED backlit buttons - White coloured LED lights f night colour vision - Unlock with PIN-code - number and name registration - owner name display Connectable devices - Security camera - Electric lock - Access controller Device f controlling the entire system Features - Easy setup ( number registration) - Easy connection check (Check connections between the control box and main monit of each room) - Real time moniting - Log (SD card recding) Text log: Me than 90,000 items (date, caller, receiver, operation, status) Image log: 90,000 images (overwrite save) (visits call) Connectable devices - PBX - PC (f program settings) - Monit (f real time moniting) Main Monit Line Up VL-MV supply unit (VL-PS0) supply unit (VL-PS0) V DC, 0.5 A V DC, 0.5 A Standby: Approx. 1.8 W Standby: Approx. 1. W Operating: Approx W Operating: Approx. 8.0 W (H x W x D) 18 x 11 x 3.5 mm 19 x 19 x 9 mm Weight 85 g 330 g Operating environment Ambient temperature: Approx. 0 C to +0 C Display 5-inch wide colour / WQVGA (80x7 pixels) 3.5-inch colour / QVGA (30x0 pixels) Display language English, French, German, Spanish, Italian, Dutch English (FX: English, Polish, Romanian, Hungarian) Frequency range IEEE b/g/n. GHz - Installation method Wall mount (mounting bracket supplied) External material Flame retardant ABS and PS resin Flame retardant ABS resin Suppted functions VL-PS0 ( ) VL-PS0 ( ) Do station 1 do station input (VL-V55/V55U, VL-V555) - Do bell 1 do bell input 1 do bell input 1 Electric lock release suppt (f individual x 1, f public x 1) (f public x 1) Picture recding 00 images 30 images (up to 50 visits (up to 8 still images per visit)) (up to 30 visits, 1 shot per visit) Voice changer Yes - Pan, Tilt, Zoom Pan, Tilt, Zoom (f, VL-V55/V55U, VL-V555) - Smartphone connect - notification * - Other functions Guard call Guard call *3 Monit security camera Monit security camera Emergency call Emergency call *3 The optional VL-RLY1 is required. * The main monit must be connected to a wireless router that is connected to the Internet in der to use feature. *3 Either one can be connected

11 Basic System Each Branch connects up to 10 es Each connects up to 0* (* units: up to 50 f each control box) 10 es per Branch Do Bell 0 0 Wire Wire Wire Wire ~0: Standard mode Do Bell Wire x Wire x Do Bell #9 #9 Wire Wire Wire Wire Repeater # # Wire Wire Wire Wire 0 per Repeater 50 Expanded System f Multi building,0 PBX Security Reception Gym # es # Wire Wire Wire Wire 5 s # 50 # # 50 Gate Monit Lineup Do Bell SOS Sens V DC supply unit (supplied) VL-MV Do Bell * SOS VL-RLY1 Main monit Monit V DC supply unit (supplied) Wireless router Your Smartphones Either one can be connected. Do bell connect to the option input * Either one can be connected. Expanded System f Large scale building There are restrictions* on the system 18 s Wire # Do Bell Wire Branches Wire x Wire Wire Wire Wire Branch1 Branch Branch3 Branch Coax (NTSC/PAL) Security Camera Wiring Distance *Use PE (polyethylene)-insulated cables. Wiring run Access Controller :up to 3 (without ) up to 18 (with ) :up to 3 ( s can be connected to each.) Wire PBX Coax (NTSC) Reception Security Gym Gate Terminal up to via PBX system Wire Wire Monit SD Card (sold separately) Wire Lift Controller VL-V70 Lift Controller VL-V70 Lift Controller VL-V70 Wire x Lift:up to 3 Reception PBX es Gate Security Gym Wire Wire Wire * # Wire diameter Wire diameter Wiring run 0.5 mm ( AWG) 1. mm (17 AWG) 0.5 mm ( AWG) 1. mm (17 AWG) - () m 00 m - (Repeater Mode) 100 m 00 m - The farthest (Standard Mode) 100 m 00 m (Repeater Mode) - The farthest (Standard Mode) 100 m 00 m (Standard Mode) - Main Monit 100 m 00 m - The farthest Lift Controller 100 m 00 m 5 s (VL-PS0) SOS Emergency Button ,0 There are usage restrictions when connecting me than 19 s. Consult your certified Panasonic dealer f me infmation. * When a visit calls a resident from the on a system with multiple es installed in one building, even though there is only one building, the visit needs to enter the building number befe entering the room number. 0 1

12 VL-VN1900 series (IP Video Intercom System f Apartment Complexes) series (Analogue Video Intercom System f Apartment Complexes) VL-VN1900 VL-VN1500 VL-MN1000 Do Monit (VL-PS0) 179 (included item) Flush mount box VL-PS VL-VN1790 (Mounting box) (sold separately) Flush mount box (included item) PoE (IEEE 80.3af compliant, Class device) PoE (IEEE 80.3af compliant, Class device) supply unit (VL-PS0) V DC, 0. A supply unit (VL-PS0 *3 ) V DC, 0. A supply unit (VL-PS0 *3 ) V DC, 0. A PoE: Standby:.5 W / Operating: 5.1 W PoE: Standby: 1.9 W / Operating:.3 W Standby: 3.5 W, Operating: 8.5 W VL-PS0: Standby:. W / Operating:.3 W VL-PS0: Standby:.1 W / Operating:. W (H x W x D) 373 x 179 x mm (excluding sections embedded into the wall) 11 x 100 x 8.5 mm x 05 x 7.8 mm Weight 1.5 kg 50 g 550 g Operating environment Ambient temperature: Approx. -10 C to +55 C Ambient temperature: Approx. -10 C to +55 C Ambient temperature: Approx. 0 C to +0 C Display 3.5-inch colour display (30x0 pixels) 7-inch wide colour display with touch screen (800x80 pixels) Display language English, Arabic, French, Italian, German, Spanish and Dutch Only user guidance suppts multiple language English, Arabic, French, Italian, German, Spanish and Dutch Resident s names are only in English Talking method Hands-free Hands-free Hands-free Netwk interface 10BASE-T/100BASE-TX (Auto MDI/MDI-X) 10BASE-T/100BASE-TX (Auto MDI/MDI-X) 10BASE-T/100BASE-TX (Auto MDI/MDI-X) Netwk protocol TCP/IP, UDP TCP/IP, UDP TCP/IP, UDP Wiring UTP (cat.5e higher) UTP (cat.5e higher) UTP (cat.5e higher) Card reader (RFID) 13.5 MHz (ISO/IEC 13 Type A (MIFARE)) 13.5 MHz (ISO/IEC 13 Type A (MIFARE)) Expanded interface Suppt f electric lock releasing (entrance unlocking) x 1 E-lock x 1 *Relay box VL-RLY1 is required (sold separately) Sens input x 5 (including emergency / urgency button) Viewing angle Hizontally: Approx. 10, Vertically: Approx. 7 Hizontally: Approx. 113, Vertically: Approx. 9 (15 angle adjusting, vertical only) Image sens.0 M pixels CMOS sens 1.3 M pixels CMOS sens Minimum illuminance required 1 lx (within approx. 50 cm from the camera lens) 1 lx (within approx. 50 cm from the camera lens) Lighting method White coloured LED lights White coloured LED lights SIP server Embedded SIP server (up to 00 devices) Video / Audio fmat Video: H., Audio: G.711 Video: H., Audio: G.711 Video: H., Audio: G.711 IP rating / IK rating IP55 * / Compliant with IK07 IP5 * / Recding Internal memy (video with audio can be saved) Installation method Surface mount (mounting bracket supplied) Flush mount (flush mounting box supplied) Surface mount (mounting base supplied) Flush mount (mounting box VL-VN1790 sold separately) External material Aluminium PC+ABS resin PC+ABS resin Suppted functions numbers using numbers 0 through 9 and letters A Unlock individual dos via the RFID card (MIFARE) Moniting through the IP camera through F Theft detection buzzer Emergency / Urgency call, Sens, Do bell Phonebook (-No., Resident s name) Intercom calls between monits (family neighbours) Theft detection buzzer Calls to SIP Phones (guard station, reception, etc.) Unlock lobby do via a PIN code RFID card (MIFARE) Register up to 3 IP cameras per monit * Reception mode Register up to 18 SIP Phones per monit *5 Display a BMP file set by the user (30x180 pixels) Options VL-VN1700 VL-PS0 VL-RLY1 Relay Box V AC, A, 50/0 Hz Input: 0-0 V AC, 0. A (50/0 Hz) Output: V DC, 0. A Supplied by the main monit Under 50 W (H x W x D) 88 x 30 x 30 mm 11 x 100 x 5 mm 9 x 78 x 38 mm Weight.5 kg 30 g 130 g Operating environment Ambient temperature: Approx. 0 C to +50 C Ambient temperature: Approx. 0 C to +0 C Ambient temperature: Approx. 0 C to +0 C (indo use only) Display Display language Talking method Netwk interface 10BASE-T/100BASE-TX/1000BASE-T (Auto MDI/MDI-X) Netwk protocol TCP/IP, UDP Wiring UTP (cat.5e higher) Expanded interface Video / Audio fmat Recding Installation method Mountable to 19-inch racks Wall mount attach to DIN rail Wall mount attach to DIN rail supply unit (VL-PS0) V DC, 0. A Input: 0-0 V AC, 0. A (50/0 Hz) Output: V DC, 0. A Standby: Approx. 1.9 W Operating: Approx..5 W (H x W x D) 373 x 179 x.5 mm (excluding sections embedded into the wall) 11 x 100 x 5 mm Weight.0 kg 30 g Operating environment Ambient temperature: Approx. 0 C to +50 C Ambient temperature: Approx. -10 C to +55 C (indo use only) Display.3-inch monochrome display (white backlit LCD) Display language English Talking method Hands-free Expanded interface Suppt f electric lock releasing (entrance unlocking) x 1 VIDEO-IN (recommended Panasonic security camera) x 1 Viewing angle Hizontally: Approx. 170 Vertically: Approx. 110 Image sens (1/ inch) CMOS sens (approx. 1 M pixels) Minimum illuminance required 1 lx (within approx. 50 cm from the camera lens) Lighting method White coloured LED lights IP rating / IK rating IP55 / Compliant with IK07 Installation method High crosion resistant stainless steel (SUS31), partially ABS and PC Wall mount attach to DIN rail External material Stainless steel (partially ABS and PC) Flame retardant PC+ABS resin Suppted functions Guidance (simple usage f visits) Night colour vision (white coloured LED lights) Heat sens: The backlight of the display and buttons are turned on when a visit is detected Display the resident s names Unlock with PIN-code 10 VL-V70 * / Repeater Box Lift Controller Supply Unit Supply Unit Supply Unit Supply Unit supply unit (VL-PS0) V DC, 0. A supply unit (VL-PS0) V DC, 0.1 A supply unit (VL-PS0) V DC, 0. A supply unit (VL-PS0) V DC, 0.1 A Standby: Approx. 3.5 W Standby: Approx. 1. W Standby: Approx. 0. W Standby: Approx. 1.5 W Operating: Approx. 3.7 W Operating: Approx..0 W Operating: Approx.. W Operating: Approx. 1.5 W (H x W x D) x 10 x 5.5 mm Weight 00 g 350 g Operating environment Ambient temperature: -10 C to +50 C (indo use only) Installation method Wall mount attach to DIN rail External material ABS (flame retardant ABS resin) Log Save the text logs and visits images in the SD card (sold separately) Text logs: Me than 90,000 items Images: 90,000 images Suppted functions USB connection (provide PC application/english) date and time setting (HH:MM DD/MM/YYYY) set the room number to the monit estimate the status of the equipment in the system operation setting (terminal, pass code, and so on.) SD card (SDHC/SDXC): Log function VIDEO OUTPUT (NTSC up to 1) RJ-11: Connect with PBX system Dip switch Mode change (Distribution mode/repeater mode) Termination setting (Nmal/Termination) ID setting (1-10) Suppted control methods 1:1 control (Relay signalling) Binary control Extend lobby stations / control boxes lobby stations control boxes Water resistance is only assured if the lobby station is installed crectly accding to the instructions in the Installation Guide, and appropriate water protection measures are taken. * The suppted control method depends on the specifications of the lift and lift control box. Contact the lift manufacturer f details. External material Front Cabinet: ABS, Lower / Upper Cabinet: Steel Flame retardant PC+ABS resin Flame retardant ABS resin Suppted functions Voice mail notification Suppts up to 000 SIP devices (embedded SIP server) 10,000 RFID card keys can be registered to each. Each card key must be individually registered / updated ( Issue card, Lost / Found, and Delete ) to each with which it will be used. There are no batch operations to register / update card keys to multiple s at the same time. * Water resistance is only assured if lobby station/the dophone installed crectly accding to the instructions in the Operating Instructions, and appropriate water protection measures are taken. *3 VL-PS0 is sold separately. * System total up to 500 IP cameras. Consult your dealer f me infmation. *5 System total up to 50 SIP phones. Consult your dealer f me infmation. 3