PRICE LIST HARCO DEEP BELL DUCTILE IRON FITTINGS 1½" 12" FITTINGS AND JOINT RESTRAINTS FOR IPS PVC PIPE 2" 4" LATERAL ISOLATION VALVES UTILITY

Transcription

1 UD0212 PGE 1 OF 21 HRCO DEEP BELL DUCTILE IRON FITTINGS 1½" 12" FITTINGS ND JOINT RESTRINTS FOR IPS PVC PIPE 2" " LTERL ISOLTION VLVES UTILITY UD0212 See for latest additions FREIGHT TERMS F.O.B. Lynchburg, Virginia LL FITTINGS MEET OR EXCEED: Materials STM -536 Joints WW C-111 Gaskets STM F-77 Coating WW C-153 ENGINEERED FOR DURBILITY pplicable U.S. Patents: #5,183,298; #5,6,27; #7,055,865; #7,255,12; #7,552,99 HRRINGTON CORPORTION P.O. BOX LYNCHBURG, VIRGINI

2 UTILITY HRCO DUCTILE IRON PRODUCTS Contents Ductile Iron Fittings Repair Couplings Bends Tees Tapped Tees Crosses and Tapped Crosses Wyes Spigot x Bell and Bell x Bell Reducers Male dapters Plug and Tapped Plugs Caps and Tapped Caps Flange dapters, Tees, and ccessories Links and Retainer Clips Replacement Gaskets Ductile Iron Saddles Saddles Lateral Connection System Swivel Tees and Saddles Swivel Lateral 90 s and Nipples Lateral 90 s, Threaded Spigot x Male NPT dapters Swivel Extensions and dapters Joint Restraint Knuckle Fitting to Pipe Pipe to Pipe Valve to Pipe Fitting to Valve Fitting to Valve to Pipe Ductile Iron Threaded Fittings Threaded Fittings Nipples Unions Ductile Iron Valves Valves Parts UD0212 PGE 2 OF 21 DISCOUNT CTEGORY Ductile Iron Sewer Fittings Wyes and Tee-Wyes G Tees G 5 Bends G 90 Bends G dapters G Concentric Increasers G U.S. made Push On Fittings available in many configurations. Call for price and availability. NOTES 1. GSKETS Included in prices unless otherwise noted. 2. CONNECTION LINKS re included in the price and shipped automatically with each SEB reducer, solid and tapped plug, and spigot x flange adapter. 3. CEMENT LINING Per WW C153. vailable upon request. dd 5% to list prices, please specify on purchase order and allow up to two weeks for shipment. Cement lined fittings are non-cancellable, non-returnable, and non-refundable.. FUSION BOND EPOXY EXTERIOR COTING Per WW C116. vailable upon request. dd 15% to list prices, please specify on purchase order and allow up to three weeks for shipment. Non-cancellable. Returnable value subject to restock and coating charge. 5. FUSION BOND EPOXY INTERIOR COTING Per WW C116. vailable upon request. dd 15% to list prices, please specify on purchase order and allow up to three weeks for shipment. Non-cancellable. Returnable value subject to restock and coating charge. 6. OTHER COTINGS available upon request, COL TR EPOXY, PROTECTO 01, and others. Call for pricing and lead times. Non-cancellable. Returnable value subject to restock and coating charge. 7. DDITIONL ITEMS Many additional configurations are possible by assembling standard fittings. Please inquire if fittings required are not in this list. 8. SUITBILITY The presence of corrosive soils or carried water may require the use of protective measures such as polyethylene encasement and/or coatings. HRRINGTON CORPORTION P.O. BOX LYNCHBURG, VIRGINI B C C C C C D D D D D D E E E F F

3 UTILITY HRCO DEEP BELL DUCTILE IRON FITTINGS UD0212 PGE 3 OF 21 REPIR COUPLING (Knock-On) 90 BEND (1/ Bend) 5 BEND (1/8 Bend) 1½ $ $0.00 2½ $ $ $ $ $ $ $ $ ½ $ $ ½ $ $ $ $ $ $ $ ½ * $ $ ½ $ $ $ $ $ $ $9.00 * ssembled from subcomponents. 22½ BEND (1/16 Bend) NUMBER WT 2½ $ $ $ $ $ $ $ ¼ BEND (1/32 Bend) TEE NUMBER WT $ $ $ $ $ ½ $ x 2 x 1½ * $ $ x 2 x 2½ $ x 2 x $ ½ x 2½ x 1½ * $ ½ x 2½ x $ ½ $ ½ x 2½ x $ x 2 x $ x 2½ x 2½ $ x 3 x 1½ * $ x 3 x $ x 3 x 2½ $ $ x x 1½ * $ x x $1.00 x x 2½ $17.00 x x $ $ x 6 x $ x 6 x 2½ $ x 6 x $ x 6 x $ $ x 8 x $ x 8 x $ x 8 x $ $ x 10 x $ x 10 x $ x 10 x $ $ x 12 x $ x 12 x $ x 12 x $1, $ * ssembled with Service Tee and Male dapter. ssembled with Tee and S.E.B. Reducer Products in this price list are mostly import. Call for domestic products, which are available for a limited set of configurations. HRRINGTON CORPORTION P.O. BOX LYNCHBURG, VIRGINI Discount Category

4 UTILITY HRCO DEEP BELL DUCTILE IRON FITTINGS UD0212 PGE OF 21 Discount Category TPPED TEE (Service Tee) (Female NPT Outlet) 1½ - 8" 10-16" CROSS (ll Gasketed Bell) 1½ x 1 * $ ½ x 2½ x 1½ x 1½ $ ½ x 1½ * $ ½ x 2½ x 2 x $ x $ x 3 x 2 x $ x 1¼ $ x 3 x 2½ x 2½ $ x 1½ $6.00 x x 2 x $ x 2 * $ x x 2½ x 2½ $ ½ x $8.00 x x 3 x $ ½ x 1¼ $ x 6 x 2 x $ ½ x 1½ $ x 6 x 2½ x 2½ $ ½ x $ x 6 x 3 x $ ½ x 2½ * $ x 8 x 2 x $ x $ x 8 x 2½ x 2½ $ x 1¼ $ x 8 x 3 x $ x 1½ $93.00 ny combination of outlets available; 1½", 2". 2½", and 3". 3 x $ x 2½ $95.00 TPPED CROSS 3 x 3 * $ x $ (Female NPT Outlet) x 1¼ $ x 1½ $ x $ ½ x 1¼ $57.00 x 2½ $ ½ x 1½ $57.00 x $ ½ x $ x $ x $ x 1¼ $ x 2½ $ x 1½ $ x $ x $ x 2½ $ x 2½ $ x $ x $ x $ x $ x 2½ $ x 1¼ $ x $ x 1½ $ x $ x $ x 2½ $ x 2½ $ x $ x $ ny combination of outlets available; 1½", 2", 2½", and 3". 10 x 1 * $ x 1¼ * $ x 1½ * $ x 2 * $ x 2½ * $ x 3 * $ x $ x 1 * $ x 1¼ * $ x 1½ * $ x 2 * $ x 2½ * $ x 3 * $ x $ * ssembled from subcomponents. 10" through 12" Tapped Tees are assembled from Swivel Tee and Swivel x Thread dapter. Some items shipped using Ductile Iron Threaded Bushing to accomplish smaller thread sizes. HRRINGTON CORPORTION P.O. BOX LYNCHBURG, VIRGINI

5 UTILITY HRCO DEEP BELL DUCTILE IRON FITTINGS UD0212 PGE 5 OF 21 WYE (Bell x Bell x Bell) NUMBER WT 1½ 80010B 10 $ B 12 $ ½ 80210B 16 $ B 2 $ Wyes may be configured for any size gasketed branch up to run diameter. WYE (Bell x Bell x Female NPT) 1½ $ $ ½ $ $ Wyes may be configured for any size thread branch from 1¼" to maximum tap size shown. Pleace specify thread tap size required. REDUCER (Bell x Bell) NUMBER WT 2 x 1½ 80130BB 13 $ ½ x 1½ 80232BB 19 $ ½ x BB 16 $ x BB 17 $ x 2½ 80330BB 17 $ x 2 803BB 21 $ x 2½ 8032BB 22 $ x BB 23 $ x BB 3 $ x 2½ 80636BB $ x BB 38 $ x $ x 2½ 80838BB 60 $ x BB 61 $ x 8083BB 55 $ x $ x BB 106 $ x BB 107 $ x BB 130 $ x BB 13 $ x BB 13 $ S.E.B. REDUCER Small End Bell (Spigot x Bell) U.S. Patent #5,183,298 2 x 1½ $ ½ x 1½ $ ½ x $ x $ x 2½ $60.00 x $6.00 x 2½ $6.00 x $ x $ x 2½ $ x $ x $ x $ x 2½ $ x $ x $ x $ x $ x $ x $ x $ x $ x $ x $ x $ Two (2) links and two (2) wedges for each spigot side only of S.E.B. Reducer are included in price and shipped automatically. Some S.E.B. Reducers assembled from Tapped Plug and Male dapter MLE DPTER (Bell x Male NPT) 1½ x 1½ $ x 1½ $ x $1.00 2½ x $7.00 2½ x 2½ $ x 2½ $ x $56.00 x $66.00 See "Knuckle Restraint," page 10, for economical restraint of Male dapter. Discount Category HRRINGTON CORPORTION P.O. BOX LYNCHBURG, VIRGINI

6 UTILITY HRCO DEEP BELL DUCTILE IRON FITTINGS UD0212 PGE 6 OF 21 Discount Category PLUG (Solid x Spigot) NUMBER WT $1.00 2½ $ $ $ $ $ $ $ Two (2) links and two (2) wedges for each Plug are included in price and shipped automatically. CP 1½ 2 2½ Style NUMBER WT STYLE B B B B B B B Style B $78.00 $78.00 $78.00 $ $ $ $ $31.00 $53.00 TPPED PLUG (Spigot x Female NPT) TPPED CP (Bell x Female NPT) 2 x $ x $ x 1½ $ x 1½ $ ½ x $ ½ x $ ½ x 1½ $ ½ x 1½ $ ½ x $ ½ x $ x $ x $ x 1½ $ x 1½ $ x $ x $ x 2½ $ x 2½ $ x 1½ $56.00 x 1½ $ x $66.00 x $ x 2½ $56.00 x 2½ $ x $66.00 x $ x 1½ $ x 1½ $ x $ x $ x 2½ $ x 2½ $ x $ x $ x 1½ $ x 1½ $ x $ x $ x 2½ $ x 2½ $ x $ x $ x 1½ $ x 1½ $ x $ x $ x 2½ $ x 2½ $ x $ x $ x $ x $ x 1½ $ x 1½ $ x $ x $ x 2½ $ x 2½ $ x $ x $ x $ x $ Two (2) links and two (2) wedges for each Tapped Plug are included in price and shipped automatically. HRRINGTON CORPORTION P.O. BOX LYNCHBURG, VIRGINI

7 UTILITY HRCO DEEP BELL DUCTILE IRON FITTINGS UD0212 PGE 7 OF 21 SPIGOT x FLNGE DPTER NUMBER WT $ $ $ $ $ $ Two (2) links and two (2) wedges for each Spigot x Flange dapter are included in price and shipped automatically. FLNGE CCESSORIES (For Class 125 & 150) NUMBER WT $ $ $ $ $ $69.00 Each kit contains ⅛" red rubber full face gasket and zinc plated bolts and nuts. Discount Category FLNGE x BELL DPTER NUMBER WT STYLE 3 x FB 22 B $ x B $ x 8060FB 29 $ x B $ x FB 7 $ x B $ x FB 67 $ x B $ x FB 56 $ x B $ x FB 76 B $ REPLCEMENT GSKETS 1½ $ $.00 2½ $ $ $ $ $ $ $28.00 FLNGE OUTLET TEE (Bell x Bell x Flange) 3 x F 27 $ x 8000F 39 $ x 80601F 9 $ x F 62 $ x F 76 $ x F 9 $ x F 111 $ x F 130 $ x F 180 $ x F 128 $ x 8 12 x F 81200F $ $1, * Flange gaskets and bolts not included. LINKS 10-12" Fitting Size 1½ - 8" 10-12" Transition & TYPE NUMBER WT 1½ $ $ Transition * $7.00 Links included in price of and automatically shipped with S.E.B.s, flange adapters, and plugs. * Used to assemble old style lug to new style thicker lug. RETINER CLIP & TYPE NUMBER WT N/ $3.00 lternative to wood wedge used when linking fittings together. HRRINGTON CORPORTION P.O. BOX LYNCHBURG, VIRGINI

8 UTILITY HRCO DUCTILE IRON SDDLES UD0212 PGE 8 OF 21 Discount Category B SDDLE (Female NPT) 3 x 1 * $ x 1½ * $ x $ x 2½ $58.00 x 1 * $60.00 x 1½ * $60.00 x $60.00 x 2½ $ x 1 * $ x 1½ * $ x $ x 2½ $ x 1 * $ x 1½ * $ x $ x 2½ $ x 1½ * $ x $ x 2½ $ x 1½ * $ x $ x 2½ $98.00 * Produced using 2" NPT with 2" x 1½" or 2" x 1" Ductile Iron Bushing, installed and sealed at factory. HRRINGTON CORPORTION P.O. BOX LYNCHBURG, VIRGINI

9 UTILITY HRCO LTERL CONNECTION SYSTEM UD0212 PGE 9 OF 21 HRCO's swivel fittings for use in effluent spray field systems. The HRCO swivel joint lateral connection systems provide for ease of installation, orientation, and "in ground" flexibility especially useful in effluent spray field riser assemblies and lateral connections. Sprinkler head Discount Category C Riser Swivel Lateral Nipple Swivel Joint Swivel joints Swivel Tee 2 2½ SWIVEL TEE NUMBER WT $8.00 $8.00 $98.00 $ $16.00 $ $17.00 $7.00 $ $1, Typical arrangement SDDLE (Female Swivel Outlet) NUMBER WT *ssembled from Service Saddle & Male dapter Bolt torque: 0-50 ft-lbs. See installation instructions. $6.00 $65.00 $77.00 $86.00 $ $ LTERL NIPPLE (Male NPT x Male Swivel) Standard x RISE WT NUMBER 2 x $ x $ x 1 * $.00 2 x $ ½ x $ x $.00 * Will not be replenished when current quantities are exhausted. 1" Side Outlet 1" Side Outlet Plugged NUMBER NUMBER $ P $ $1.00 $ P P $.00 $ $ P $ $ P $ $ P $51.00 HRRINGTON CORPORTION P.O. BOX LYNCHBURG, VIRGINI

10 UTILITY HRCO LTERL CONNECTION SYSTEM UD0212 PGE 10 OF 21 Discount Category C The HRCO swivel joint lateral connection systems provide for ease of installation, orientation, and "in ground" flexibility especially useful in effluent spray field riser assemblies and lateral connections. Sprinkler head Riser Swivel joint Swivel joint Typical arrangement LTERL 90 (Male NPT x Male Swivel) Standard 1" Side Outlet 1" Side Outlet Plugged x RISE WT NUMBER NUMBER NUMBER 1 x 6 80B86 $ B862 $ B862P $ ½ x $ $ P $ x $ $ P $ x $ $ P $ ½ x $ $ P $ x $ $ P $61.00 LTERL 90 (Spigot x Male Swivel) Standard 1" Side Outlet 1" Side Outlet Plugged x RISE 2 x 6 WT 6 NUMBER $33.00 NUMBER $38.00 NUMBER P $0.00 2½ x $ $ P $ x $ $ P $55.00 x RISE 2 x 10 2 x 12 2 x 18 LTERL NIPPLE (Spigot x Male Swivel) WT 5 7 Standard NUMBER $ $ $.00 1" Side Outlet NUMBER $ $ $8.00 1" Side Outlet Plugged NUMBER P $ P $ P $51.00 HRRINGTON CORPORTION P.O. BOX LYNCHBURG, VIRGINI

11 UTILITY HRCO LTERL CONNECTION SYSTEM UD0212 PGE 11 OF 21 Standard x RISE WT NUMBER 1½ $ $ ½ $ $69.00 SPIGOT x MLE NPT DPTER 1½ x $ x $ x $ x $ x $.00 X- 2 x $8.00 SECT. IN USE 2½ x $ x $3.00 Part has groove on spigot end for restraint to HRCO Bell with Knuckle Restraint. Call for other sizes and lengths. lso available in spigot x spigot. Knuckles sold separately. LTERL 90 (Male NPT x Male NPT) 1" Side Outlet 1" Side Outlet Plugged NUMBER NUMBER $ P $ $ P $ $ P $ $ P $79.00 Control valve Lateral Connection See page 1 for Swivel Isolation Valve Swivel joint Discount Category C SPIGOT x MLE NPT DPTER, COMPCT NUMBER WT 2 x $ x 1¼ $ x 1½ $32.00 X- 2 x $32.00 SECT. 2 x 2½ $35.00 Part has groove on spigot end for restraint to HRCO bell with Knuckle Restraint. Knuckles sold separately. RISE SWIVEL EXTENSION (Male Swivel x Female Swivel) RISE MNPT NUMBER NUMBER WT 6 11 DPTER (Female Swivel x Thread) WT 3 $29.00 $7.00 $60.00 HRRINGTON CORPORTION P.O. BOX LYNCHBURG, VIRGINI

12 UTILITY HRCO JOINT RESTRINT UD0212 PGE 12 OF 21 Discount Category D KNUCKLE RESTRINT U.S. Patent #7,552,99 1½ $ $ ½ $ $ $71.00 Knuckle bolt torque: 35 ft-lbs. FITTING TO PIPE RESTRINT (Clamshell Restraint) PIPE TO PIPE RESTRINT (Style ) $ ½ $ $ $ $ $ $ $ Price is for one (1) set consisting of one (1) clamp and bolt set, one (1) backup ring, and two (2) T-bolts with nuts. VLVE TO $83.00 PIPE RESTRINT $ (Style B) 2-8" 10-12" $ $ $ $ Price is for one (1) set consisting of two (2) clamp halves and 2½ $ four () clamp bolts with nuts $ $ FITTING TO $ $ PIPE RESTRINT $79.00 (Style ) $ Price is for one (1) set including two (2) clamp and bolt sets, and restraint rods with nuts as required $5.00 2½ $59.00 FITTING TO VLVE $ $83.00 TO PIPE RESTRINT 2-8" $ (Style ) 10-12" $15.00 Price is for one (1) set including one (1) clamp and bolt set, and two (2) eye bolts with nuts $ ½ $ $ FITTING TO VLVE $ RESTRINT $ $ $ $ $ $59.00 Price is for one (1) set including one (1) clamp and bolt set, $66.00 and restraint rods and nuts as required $80.00 Price is for one (1) set including backup ring and two (2) eye bolts with nuts. Grip Ring bolt torque: 100 ft-lbs. Knuckle Restraint bolt torque: 35 ft.-lbs. Valve restraints fit the following brands: merican Flow Control, VK, Clow, Kennedy, Matco-Norca, M&H, Nibco, Waterous HRRINGTON CORPORTION P.O. BOX LYNCHBURG, VIRGINI

13 UTILITY HRCO JOINT RESTRINT UD0212 PGE 13 OF 21 Tables below list number of adjacent pipe joints to be restrained for basic fitting configurations. These were calculated using the joint restraint calculator available at for a set of assumptions that will envelop many applications. Check that the assumptions listed below meet or exceed your application. If your situation is not covered by the assumptions or a more refined restraint scheme is desired, use the restraint calculator at Bends, Reducers, Caps, and Valves Bends Reductions Dead Size 11¼ 22½ Ends 2 2½ Tees - Branch bell only restrained: Use joint restraints ONLY on branch. Number below is number of 20' joints to be restrained with pipe to pipe restraints. Run Tees (Branch Size) 2 2 Size 2 2½ ½ Bends & Caps/Dead Ends: Restrain all bells and the adjacent joints listed in table (both directions for bends) Discount Category D Reducers: Restrain large bell and adjacent joints listed in table. Valves: Treat as Dead End. Use Valve Restraint and restrain adjacent upstream joints listed in table. If closed valve can have pressure from either side, restrain adjacent joints both sides per table. Tees - Branch bell only restrained: Use joint restraint on LL three branches of tee. Number below is number of 20' joints to be restrained with pipe to pipe restraints in branch only direction. Run Tees (Branch Size) Size 2 2½ ½ Tees - With Run Reductions: Restrain all bells and adjacent branch joints noted. Treat run reduction as a reducer. Restrain as noted adjacent joints to large bell per reducer table. Restraint Calculation ssumptions: Maximum pressure: 125 psi Restrained Lengths: Each restraint connects 20 ft length of pipe Soil Type: Type GM, gravel-sand-silt mixture Minimum Burial Depths: 2" 2½", 18" cover; 3" 8", 2" cover; 10" 12", 30" cover; 1"-16", 36" cover Trench Type: 3, pipe bedded in inches minimum loose soil. Backfill lightly consolidated to top of the pipe. Safety Factor: 1.5 HRRINGTON CORPORTION P.O. BOX LYNCHBURG, VIRGINI

14 UTILITY HRCO DUCTILE IRON THREDED FITTINGS UD0212 PGE 1 OF 21 Discount Category E TEE BUSHING CP COUPLING 90 BEND 5 BEND PLUG 1½ $ $ ½ $ $ ¼ x $9.00 1½ x $9.00 1½ x 1¼ $ x $ x 1¼ $ x 1½ $ ½ x 1½ $ ½ x $ x $ x 2½ $ ½ $ $ ½ $ $61.00 NUMBER WT 1½ ½ NUMBER 1½ ½ NUMBER WT 1½ ½ $12.00 $17.00 $29.00 $3.00 WT 1 $ $21.00 $ $67.00 $21.00 $2.00 $57.00 $ $7.00 1½ $9.00 $ ½ $ $16.00 UNION NIPPLE (Male NPT x Male NPT) 1½ NUMBER WT ½ T.O.E. Nipples available $56.00 $71.00 $ $ ½ x Close $9.00 1½ x $9.00 1½ x $ ½ x $ ½ x $ ½ x $ ½ x $ ½ x $2.00 1½ x $6.00 1½ x $ ½ x $ ½ x $ x Close $ x $ x $ x $ x $ x $ x $ x $ x $ x $ x $ x $ x $ x $ ½ x $ ½ x $ ½ x $2.00 2½ x $7.00 2½ x $ ½ x $ ½ x $ ½ x $7.00 2½ x $ x Close $ x $ x 3 x $32.00 $ x $ x $ x $ x $ x $ x $ x $92.00 HRRINGTON CORPORTION P.O. BOX LYNCHBURG, VIRGINI

15 UTILITY HRCO VLVES UD0212 PGE 15 OF 21 For Swivel Lateral Connection Fittings. See page 9. Useful in effluent sprayfield systems. STYLE LTERL ISOLTION VLVE (U.S. Patents #7,055,865; #7,552,99) Outlet Size x Main to Lateral Rise DESCRIPTION (Size x "Rise to Lateral") 2" x 6" Gasket x Male Swivel WT 15 With Cross Handle NUMBER With Square Nut * NUMBER Discount Category F 2" x 6" Gasket x Male Swivel, 1" Side Outlet Plugged 15 2" x 12" Gasket x Male Swivel Minimum "rise" of 13". 2" x 12" Gasket x Male Swivel, 1" Side Outlet Plugged 2" Gasket x Gasket 17 2" Gasket x Gasket, 1" Side Outlet Plugged 17 2½" x 6" Gasket x Male Swivel, 1" Side Outlet Plugged 15 3" x 6" Gasket x Male Swivel, 1" Side Outlet Plugged 22 N/ " x 6" Gasket x Male Swivel, 1" Side Outlet Plugged 29 N/ ** Use the New HRCO Lateral Isloation Valve Price List for LIV pricing ** S STYLE DESCRIPTION LIV Cross Handle LIV Square Operating Nut NUMBER NUMBER WT STYLE DESCRIPTION LIV Bonnet $2.00 ssembly, 2" & 2½" LIV Bonnet $18.00 ssembly, " & " WT 5.0 $ $ " Grip Ring ssembly $ " Gasket $.00 2½" Grip Ring ssembly $ ½" Gasket $.00 3" Grip Ring ssembly $ " Gasket $5.00 " Grip Ring ssembly $30.00 " Gasket $5.00 HRRINGTON CORPORTION P.O. BOX LYNCHBURG, VIRGINI

16 UTILITY HRCO DUCTILE IRON SEWER FITTINGS UD0212 PGE 16 OF 21 Harco DI Sewer Fittings are for gravity sewer systems using various types of pipes, including: Sewer: PVC Pipe to STM D303 DIPS: PVC Pipe to WW C900 and DI Pipe to WW C900 IPS: PVC Pipe to STM D2665, D1785, D221 6 x 8 x 8 x 6 TEE-WYE (GxGxG) Bituminous Cement Coal Tar Protecto 01 Bituminous Cement Coal Tar Protecto 01 Bituminous Cement Sewer x Sewer # WT C T P C T P C $ $16.00 $ $ $ $ $ $ $23.00 $ $ $ C T P 9 Discount Category G $ $ $29.00 $68.00 $ $ $ $ P C T P 63 $ $3.00 $ $55.00 $ $ $05.00 $7.00 Coal Tar T Protecto P Sewer x DIPS DIPS x Sewer # WT # WT C T P C T 7 $ $38.00 $ $72.00 $ $ $ $78.00 WYE (GxGxG) 6 x 6 8 x COTING Sewer x Sewer DIPS x DIPS DIPS x Sewer DIPS x IPS COTING # WT # WT # WT Bituminous $ Cement C $ Coal Tar T $12.00 Protecto P $ Bituminous $ Cement C $ Coal Tar T $ Protecto P $36.00 Bituminous $ Cement C $ Coal Tar T $ Protecto P $ Bituminous $ $ Cement C $ C $ C 6 Coal Tar T $ T $ T 69 Protecto P $ P $ P Bituminous $ $ Cement C $ C $ C 5 76 Coal Tar T $ T $ T 58 Protecto P $ P $ P $ $38.00 $ $72.00 $ $ $ $ C T P C T P x 6 x 8 x 6 # WT HRRINGTON CORPORTION P.O. BOX LYNCHBURG, VIRGINI

17 UTILITY HRCO DUCTILE IRON SEWER FITTINGS UD0212 PGE 17 OF BEND (GxG) Sewer x Sewer DIPS x DIPS IPS x IPS COTING # WT # WT # WT Bituminous $ $98.00 Cement C $ C $ C $ Coal Tar T $ T $ Protecto P $ P $29.00 Bituminous $ $ Cement C $ C $ C $ Coal Tar T $ T $ Protecto P $ P $ Bituminous Cement C $ Coal Tar Protecto 01 5 BEND (GxS) Sewer x Sewer DIPS x DIPS COTING # WT # WT Bituminous $ Cement C $ C 11 Coal Tar T $ T 15 Protecto P $ P Bituminous $ Cement C $ C 20 Coal Tar T $ Protecto P $ Bituminous Cement C Coal Tar 8 Protecto 01 $89.00 $9.00 $ $ $ $ IPS x IPS # WT C T P 1 $70.00 $7.00 $81.00 $ TEE (GxGxG) DIPS x DIPS COTING # WT 8 x Cement C 93 $ x 6 Cement C 103 $ x 8 Cement C 109 $ x 6 CONCENTRIC INCRESER (GxS) Sewer x Sewer COTING # WT Bituminous Cement C Coal Tar T 11 Protecto P $51.00 $53.00 $58.00 $27.00 Discount Category G HRRINGTON CORPORTION P.O. BOX LYNCHBURG, VIRGINI

18 UTILITY HRCO DUCTILE IRON SEWER FITTINGS UD0212 PGE 18 OF 21 Discount Category G DPTER (GxS) DIPS x Sewer Sewer x DIPS IPS x Sewer COTING # WT # WT # WT Bituminous $ $3.00 Cement C $ C $ Coal Tar T $ T $9.00 Protecto P $ P $ Bituminous $ $ Cement C $ C $ Coal Tar T $ T $81.00 Protecto P $ P $ Bituminous Cement Coal Tar Protecto 01 Bituminous Cement Coal Tar Protecto 01 Bituminous Cement Coal Tar Protecto C $ $ Sewer x DIPS COTING # WT Bituminous Cement P C T $ Coal Tar T P $ Protecto P $ Bituminous C $ Cement C T $20.00 Coal Tar T P $53.00 Protecto P $22.00 Bituminous C $26.00 Cement C T $ Coal Tar T P $ Protecto P 6 Bituminous Cement Coal Tar Protecto 01 DPTER (GxG) C T $ $ $ $ $ $ $ $ $ $ $ $15.00 $ $21.00 $ $ BEND (GxS) Sewer x Sewer Sewer x DIPS DIPS x DIPS IPS x IPS COTING # WT # WT # WT # WT Bituminous $ $ $90.00 Cement C $ C $ C $ C $ Coal Tar T $ T $ T $ T $10.00 Protecto P $ P $ P $ P $ Bituminous $ $ $ Cement C $ C $ C $ C $ Coal Tar T $ T $ T $ T $ Protecto P $ P $ P $ P $3.00 Bituminous 8 Cement C $ Coal Tar T $ Protecto p $5.00 HRRINGTON CORPORTION P.O. BOX LYNCHBURG, VIRGINI

19 UTILITY HRCO PUSH JOINT DUCTILE IRON SEWER FITTINGS TYPICL USES For the most up-to-date version of this price list, Discount Category G IPS, G x S, 5 Bend Part # xxx IPS (DWV) Sewer Lateral DI x IPS, Wye Part # xxyy UD0212 PGE 19 OF 21 DI or C900 PVC Pipe Sewer Main Sewer, G x S, 5 Bend Part # xxx PVC Sewer Lateral Sewer x DIPS, G x G, dapter Part # 2837-xxx DI x Sewer, Wye Part # xxyy DI or C900 PVC Pipe Sewer Main PVC Sewer Main DI or C900 PVC Pipe Sewer Main Water Main Sewer x DIPS, G x S, dapter Part # 283-xxx HRRINGTON CORPORTION P.O. BOX LYNCHBURG, VIRGINI

20 UTILITY HRCO PUSH JOINT DUCTILE IRON SEWER FITTINGS TYPICL USES For the most up-to-date version of this price list, Tapered flow way providing for smooth transition UD0212 PGE 20 OF 21 Discount Category G DIPS x Sewer, G x G, dapter Part # 2837-xxx DIPS x DIPS, G x G, 90 Bend Part # xxx Sewer x DIPS, G x G, 5 Bend Part # xxx DI or C900 PVC Pipe Sewer Lateral Sewer x DIPS, Tee-Wye Part # xxyy Sewer x DIPS, Tee-Wye Part # xxyy PVC Sewer Main HRRINGTON CORPORTION P.O. BOX LYNCHBURG, VIRGINI

21 UTILITY NOTES UD0212 PGE 21 OF 21 Notes HRRINGTON CORPORTION P.O. BOX LYNCHBURG, VIRGINI

22 This page was intentionally left blank

23 This page was intentionally left blank

24 UD0212 PGE 20 OF 20 OTHER COMPTIBLE PIPE STNDRDS British Standards: BS 3505/3506 1½", 2", 3", ", 6", 8", 10", 12" Japanese Standards: JIS K 671 with transition gaskets, Call for Product # s 50mm, 75, 150, 200, 250, 300 US made Push On fittings are available in many configurations. Call for price and availability. Mechnical Joint Fittings are available. Call for price and availability. Conditions of Sale RETURNS: ll returned merchandise must have authorization from Harco. Returned merchandise will only be accepted within one (1) year of the date of invoice. Merchandise must be in new and marketable condition. Freight charges on authorized returns must be prepaid and a restocking charge will be made except for returns resulting from shipping errors on our part or material proven to be defective. CLIMS: ll claims for damage or shortage in transit shall be handled with the carrier by the consignee. GURNTEE: The Harrington Corporation (Seller) guarantees to credit against invoice price or, at its option, to furnish, but not to install, replacement parts of like kind, F.O.B. its plant, Lynchburg, Virginia, any item of its manufacture proved to be defective in material or workmanship within one (1) year from date of shipment provided Buyer (or Purchaser) gives immediate written notice of such alleged defect and, if required, returns defective item to Seller s plant freight prepaid. Items or components not of Seller s manufacture are not included in the foregoing guarantee but are subject only to any warranty of their respective manufacturers. Seller shall not be liable for the cost of any repairs or work done or materials used by the Buyer because of defective or non-conforming items, unless authorized in writing by Seller. IN NO EVENT SHLL SELLER BE LIBLE FOR INCIDENTL OR CONSEQUENTIL DMGES CUSED BY BRECH OF THIS GURNTEE unless applicable federal or state law forbids exclusion of incidental or consequential damages. WRRNTIES: EXCEPT FOR THE BOVE GURNTEE, SELLER MKES NO EXPRESS WRRNTIES ND NO IMPLIED WRRNTIES OF MERCHNT BILITY OR FITNESS FOR NY ICULR PURPOSE S TO PRODUCTS SOLD BY US, UNLESS PPLICBLE FEDERL OR STTE LW FORBIDS SUCH DISCLIMER OF WRRNTIES. NO WIVER, LTERTION, OR MODIFICTION OF THIS DISCLIMER OF WRRNTIES SHLL BE VLID UNLESS MDE IN WRITING ND SIGNED BY N EXECUTIVE OFFICER OF SELLER. S: Subject to change without notice. Possession of price sheets does not constitute an obligation to sell and orders may be refused without cause. SUITBILITY: The presence of corrosive soils or carried water may require the use of protective measures such as polyethylene encasement and/or coatings. Plant in Lynchburg, Virginia Warehouses in Virginia, Florida, Texas, and rizona ENGINEERED FOR DURBILITY HRRINGTON CORPORTION HRCO Fittings MILING DDRESS: P.O. Box Lynchburg, V PHYSICL DDRESS 3721 Cohen Place Lynchburg, V PHONE: FX: EMIL: sales@harcofittings.com