ZA-3150AC1 Motherboard

Transcription

1 ZA-3150AC1 Motherboard User Manual Support Intel Celeron N3150 Quad core Processor Version: 1.0 Issue date: 06/2016

2 ZA-3150AC1 Motherboard Configuration Diagram 1

3 ZA-3150AC1 Motherboard Diagram 2

4 Catalog ZA-3150AC1 Motherboard Configuration Diagram...1 ZA-3150AC1 Motherboard Diagram...2 Chapter 1 Hardware Installation Precautions Before Installation...3 Chapter 2 Introduce The System Board Motherboard Specification...4 Chapter 3 Motherboard I/O Interface Diagram... 5 Chapter 4 Hardware Characteristics... 6 Graphics/LAN/USB/Hard Disk Interface...6 Hard Drive Power Supply/Other Onboard Pin/ COM COM/Other Onboard Pin LVDS Wiring Specification... 9

5 Chapter 1: Hardware Installation 1-1 Precautions Before Installation Precision integrated circuits and other components, which are easily damaged by static electricity. Please read this manual before installation and prepare for the following: Please confirm that the chassis size is in line with the motherboard before installation. Before the installation, please do not tear up the motherboard serial number and dealer warranty sticker, otherwise it will affect product warranty period identified standard. Be sure to turn off the power and remove the power cord from the socket before installing or removing the motherboard and other hardware device. When installing other hardware devices to the socket on the motherboard, make sure that the interface and socket are tightly integrated. Please take the motherboard do not to touch the metal wiring part to avoid short circuit. Take the motherboard, CPU or Memory, it is best to wear anti-static bracelet. If there is no anti-static bracelet, make sure your hands are dry and touch the metal at first to eliminate static electricity. The motherboard is not installed, please put in anti-static pad or anti-static bag. Make sure the power is turned off when you pull the plug on the motherboard socket. Before you turn on the power, make sure that the voltage value of the power supply is the standard voltage set in the area. Before the power on please make sure all hardware devices and power line are correctly connected. Do not allow screws to touch the circuit or other parts on the motherboard to avoid damage to the motherboard. Make sure there are no screws or metal products left on the motherboard or in the computer case. Please do not place the computer host in the unstable place. Please do not place the computer host in a high temperature environment. If the power is turned on during installation, it may cause damage to the motherboard, other devices or yourself. If you are not familiar with the installation, or use this product have any technical problems, please consult a professional technical staff.. 3

6 Chapter 2: Introduce The System Board 2-1.Motherboard Specification Model NO. ZA-3150AC1 Size Mini ITX 170mm x 170mm CPU Intel Celeron N3150 Quad Core Processor Memory 1 DDR3 Slot, support DDR3L-1600,Up to 8GB Graphics Chipset Intel HD Graphics N3150 1* DC Power Supply (12V) 1* HDMI Rear I/O 1* VGA 4* USB3.0 1* L AN 1* Mic-in/Line-out 1* USB PIN,Support 2* USB2. 0 1* CPUFan Internal I/O Expansion Slot Storage BIOS LAN H/W Monitoring Audio Operating System Temp. Humidity 1* SYSFan 1* LVDS, Support Dual Channel 8 bit 2* COM 1*LCD Backlight Control Port 1* LCD Inverter 1* 1*12 VGA PIN 1* 2*2 PIN Power Socket 1* SATA 1* Audio Pin Port (2W/CH) 1* Front Panel 1* MINI-PCIE(Support MSATA) 1* MINI-PCIE(Support WiFi 3G) 1* SATA Slot AMIBIOS,64M bit Flash Memory 1*Realtek 8111E,10/100/1000M, Ethernet Control Temperature Management,Voltage Management,System Power Management ALC662 Dual Channel Output WindowsXP, Windows7, Windows8, Windows10, Linux -10 C ~ 55 C 0% ~ 95% (Relative Humidity,No Condensation) 4

7 Chapter 3: Motherboard I/O Interface Diagram ZA-3150AC1 Motherboard MSATA1 FP1 SYS_FAN COM1 COM2 INVERT1 SATAPWR1 LVDSP1 SATA1 TISM2 WiFi FUSB1 CFPA1 SPEAK1 PWR4P4 HDMI2 12VDC HDMI VGA VGA USB3.0 RJ45 USB3.0 MIC/LINEOUT Notice The above diagram maybe is not the same with your motherboard,just for reference. 5

8 Chapter 4: Hardware Characteristics Graphics Display Display Chip And Core Intel Graphics Media Accelerator Db15 Interface And 1*12PIN Interface 1*12PIN VGA PIN Definition: Interface Type VGA Interface Type HMDI HDMI Standard interface LAN Chip Card Function Interface Type NIC Lamp Definition USB Interface Type Realtek RTL8111E 10/100/1000M bps Adaptive,support PX E boot,support remote wake-up Rj45 Custom USB Interface Rear Interface 4 Internal PIN USB PIN Definition : 1. VCC 2. DATA0-3. DATA0+ 4. GND Interface And PIN Type Hard Disk Interface Interface Type PIN Definition 1*4Pin header/2.54mm 1*SATA Port;1*MSATA Standard Notice Please use the SATAPORT with our collocation power line,can not be replaced. 6

9 Hard Disk Power 1.+5V 2. GND 3.GND 4.+12V Interface Definition JSATA PIN And Interface Type Notice Other Onboard PIN 1*4 pin/2.54mm Please use the SATAPORT with our collocation power line,can not be replaced. Front panel Definition Pin Define: 1. HDD LED+(HD Active LED) 2. PWRLED+ 3. HDD LED- (HD Active LED)H 4. GND 5. RESET (Reset Button Signal) 6. P_SWIN 7. GND 8. GND 9. GND HDD Active LED: 1,3 Power Button: 6,8 Power LED: 2,4 Reset Button: 5, PIN Type 2.54mm /2*5Pin CPUFAN QTY 1 Power Interface 1 Standard 12V DC Power Notice COM Position COM PIN Definition Do not use the 19V adapter. 2 serial Port.COM1 COM2.COM3.COM4.COM5.COM6. All For PIN Interface. Pin Definition (Standard RS 232): Full Signal RS232 2*5 PIN Definition 1. DCD 2. RXD 3. TXD 4. DTR 5. GND 6. DSR 7. RTS 8. CTS 9. RI 10. NC(CUT) COM1 and COM2 the 9th feet can be passed the FUN1 and FUN2 jumper setting Power Type And Mode PIN Define 1-2 RI V V 7

10 COM PIN:COM1/COM2/COM3/COM4/COM5/COM6 COM PIN Signal Define LVDS Wiring Specification 1.Specification For Wiring: 2. Screen circuit board power supply selection: 3.Inverter Setting: PIN Voltage output 1-2 RI V V LVDSP GND GND Adj EN +12V +12V INVERT1 *Other Matters Please consult the sales staff 8