DZT Line Deutsche Zähler Technik

Transcription

1 DZT Line Deutsche Zähler Technik DZTechnik stands for Deutsche Zähler Technik, and respresents an alternative range of DIN-rail electricity meters with a perfect mix of quality and price. These high quality meters come with a 24 months warranty. The DZT meters can be used for simple measurement as well as read out at a distance. The DZT meters are thoroughly tested and have been used for more than a decade all over the world. Especially fit for panel building, measurement of energy use in apartment blocks, small spaces and of course environmentally friendly applications, like photo voltaic installations or windmills, these meters are highly suitable. The range of MID (Measurement Instrument Directive) approved meters are suitable for billing purposes. If you are operating in a price sensitive marketplace and want to save on energy for economic and environmental reasons, our DZT meters are perfect for you.

2

3 Index Single phase energy meters... 1 Module - (optional: MID - Modbus)... V05 2 Module - (optional: Modbus)... V07 4 Module - (optional: MID - Modbus/M-bus)... V09 Three phase energy meters... 2 Module - CT - (optional: Modbus)... V11 4 Module - (optional: Direct/CT - Modbus)... V13 5 Module - (optional: CT - IEC1107)... V15 7 Module - (optional: Direct/CT - Modbus)... V17 Meterboard Meter - 1 phase... Meterboard Meter - 3 phase... Selection Table - 1 Phase... Selection Table - 3 Phase... MID Certified Meter Overview... V19 V21 V23 V24 V25 Inepro - Metering - DZT-Line - V03

4 V04 - Inepro - Metering - DZT-Line

5 1 Phase - 1 Module The DZT 6002 is simple single phase one module Din-Rail meter. This meter is MID certified and can be used for billing purposes. The DZT 6001 is a more sophisticated one module Din rail meter (19,5 mm width). This none MID approved meter has RS485- Modbus communication and can read and display the following variables: kwh, active energy, reactive energy and active power. Phase and Module 1 1 DZT 6002 wiring diagram: MID certified suitable for billing purposes. Inepro - Metering - DZT-Line - V05

6 Specifications 1 Phase - 1 Module Technical specifications Height : 97,2-120mm Width Depth Mounting Starting current Power consumption Frequency International standard Warranty : 18-19,5mm : 63-69mm : DIN rail : 0,004Ib : 8VA - 0,4W : 50 / 50-60Hz : EN (DZT6002), EN , EN , DIN EN50022, DIN43880 : 24 months Different models Article code MID Pha. Mod. Amp. Volt. Com. Con. mode Digits Tot. Energy 1 Bat. Acc. Class Register Backlight Impuls DZT6001 x A 230V Modbus Direct LCD 5+2 x F+R Yes DZT6002 Yes A 230V x Direct LCD 6+1 x F+R x B 1000 DZT6004 x A 230V x Direct Mech. 5+2 x F+R x DZT6054 x A 230V x Direct LCD 6+1 Blue F+R x DZT6143 x A 230V x Direct LCD 5+2 x F+R x DZT6144 x A 230V x Direct LCD 6+1 x F+R x DZT6277 Yes A 230V x Direct Mech. 5+1 x F+R x B 1000 DZT6278 Yes A 230V x Direct Mech. 5+1 x F+R x B 100 DZT6279 Yes A 230V x Direct Mech. 5+1 x F+R x B 2000 DZT6280 Yes A 230V x Direct LCD 5+1 Blue F x B 2000 DZT6284 Yes A 230V x Direct Mech. 5+1 x F x B Total Energy is calculated as Forward + Reverse (F+R) or Forward only (F) V06 - Inepro - Metering - DZT-Line

7 1 Phase - 2 Module The DZT 6005 is a simple single phase two module Din-Rail meter equipped with reset button. The display shows two rows with values. The upper row can be reset and the row under it displays the total energy (usage). Phase and Module The DZT 6009 is more sophisticated because it has also been equipped with RS485/Modbus communication. The DZT 6051 is the most sophisticated meter because it also has an internal relay which allows you to switch the meter on or off. 1 2 DZT 6005 wiring diagram: Single phase meter equipped with reset button. Inepro - Metering - DZT-Line - V07

8 Specifications 1 Phase - 2 Module Technical specifications Height : 118mm Width Depth Mounting Starting current Power consumption Frequency Infra-red International standard Internal relay Warranty : 18mm : 63mm : DIN rail : 0,004lb : 8VA - 4W : 50 / 50-60Hz : Yes (DZT6015) : EN , EN , DIN EN50022, DIN43880 : Yes (DZT6015, DZT6051) : 24 months Different models Article code MID Pha. Mod. Amp. Volt. Com. Con. mode Digits Tot. energy 1 Acc. Class Register Backlight Battery Impuls DZT6005 x A 230V x direct LCD 5+1 x F+R x DZT6009 x A 230V Modbus direct LCD 5+1 x F+R x DZT6015 x A 230V IEC1107 direct x x x F+R x DZT6051 x A 230V Modbus direct LCD 5+1 x F+R x Total Energy is calculated as Forward + Reverse (F+R) or Forward only (F) V08 - Inepro - Metering - DZT-Line

9 1 Phase - 4 Module The DZT 6007 is a single phase four module Din-Rail meter equipped with RS485-Modbus communication. This meter is MID certified and can be used for billing purposes. The DZT 6010 is a none-mid 4 module meter with M-bus communication. The 4 module 100A versions without communication are named: DZT 6032 and The DZT 6032 has a mechanical register. The DZT 6047 has a LCD register The DZT 6049 meter with internal relay completes the product range. This 60A meter has Modbus communication. Phase and Module 1 4 DZT 6007 wiring diagram: Communication meter suitable for billing purposes Inepro - Metering - DZT-Line - V09

10 Specifications 1 Phase - 4 Module Technical specifications Height : 76mm Width Depth Mounting Starting current Power consumption Frequency International standards Internal relay Warranty : 100mm : 65mm : DIN rail : 0,004lb : 7VA - 1W : 50Hz : EN (DZT6007), DIN43880 : Yes (DZT6049) : 24 months Different models Article code MID Pha. Mod. Amp. Volt. Com. Con. mode Digits Tot. energy 1 Acc. Class Register Backlight Battery Impuls DZT6007 Yes A 230V Modbus direct LCD 5+2 x F+R x B 1600 DZT6010 x A 230V M-bus direct LCD 5+2 x F+R x DZT6032 x A 230V x direct Mech. 5+1 x F+R x DZT6047 x A 230V x direct LCD 5+2 x F+R x DZT6048 x A 230V Modbus direct LCD 5+2 x F+R x DZT6049 x A 230V Modbus direct LCD 5+2 x F+R x Total Energy is calculated as Forward + Reverse (F+R) or Forward only (F) V10 - Inepro - Metering - DZT-Line

11 3 Phase - 2 Module The DZT 6169 is a simple single phase two module Din-Rail meter equipped with reset button. The display shows two rows with values. The upper row can be reset and the row under it displays the total energy (usage). Phase and Module The DZT 6009 is more sophisticated because it has also been equipped with RS485/Modbus communication. The DZT 6051 is the most sophisticated meter because it also has an internal relay which allows you to switch the meter on or off. 3 2 DZT 6169 wiring diagram: Three phase CT/VT meter. Inepro - Metering - DZT-Line - V11

12 Specifications 3 Phase - 2 Module Technical specifications Height : 118mm Width Depth Mounting Starting current Power consumption Frequency Infra-red International standard Internal relay Warranty : 18mm : 63mm : DIN rail : 0,004lb : 8VA - 4W : 50 / 50-60Hz : Yes (DZT6015) : EN , EN , DIN EN50022, DIN43880 : Yes (DZT6015, DZT6051) : 24 months Different models Article code MID Pha. Mod. Amp. Volt. Com. Con. mode Digits Tot. energy 2 Acc. Class Register Backlight Battery Impuls DZT6169 x 3 2 /6A 230/400V Modbus CT LCD Var. 1 Yes F+R Yes Variable; depending on the CT-ratio: 5+3, 6+2, 7+1, Total Energy is calculated as Forward + Reverse (F+R) or Forward only (F) V12 - Inepro - Metering - DZT-Line

13 3 Phase - 4 Module The DZT6014 is a CT meter with a fantastic design and great functionality. The meter has a blue backlight. The meter has a pulse output of pulses and is also available in pulse version (DZT6156). Phase and Module 3 4 Fantastic design and great functionality. Inepro - Metering - DZT-Line - V13

14 Specifications 3 Phase - 4 Module Technical specifications Height : 100mm Width Depth Mounting Starting current Basic current (Ib) Max current (Imax) Power consumption Frequency International standard CT ratio (for CT models) Warranty : 76mm : 65mm : DIN rail : 0,004lb : 1.5 / 5A : 6 / 80A : 10VA - 2W : 50 / 50-60Hz : EN , EN , DIN EN50022 : Selectable : 24 months Different models Article code MID Pha. Mod. Amp. Volt. Com. Con. mode Digits Tot. energy 1 Acc. Class Register Backlight Battery Impuls DZT6014 x 3 4 /6A 230/400V x CT LCD 6+2 Blue F+R x DZT6035 x A 230/400V x Direct LCD 6+2 Blue F+R Yes DZT6156 x A 230/400V x Direct LCD 6+2 Blue F+R Yes DZT6252 Yes A 230/400V x Direct LCD 6+2 Blue F Yes B Total Energy is calculated as Forward + Reverse (F+R) or Forward only (F) V14 - Inepro - Metering - DZT-Line

15 3 Phase - 5 Module The DZT 6013 is a three phase four module Din-Rail meter equipped with RS485-IEC1107 communication and infra red eye. IEC1107 is a communication protocol similar to Modbus. The meter can display up to 8 tariffs. Phase and Module 3 5 DZT 6013 wiring diagram: This meter can display up to 8 tariffs. Inepro - Metering - DZT-Line - V15

16 Specifications 3 Phase - 5 Module Technical specifications Height : 128mm Width Depth Mounting Starting current Power consumption Frequency International standard CT ratio (for CT model) Warranty : 90mm : 67mm : DIN rail : 0,004lb : 10VA - 1,5W : 50 / 50-60Hz : EN , EN , DIN EN50022, DIN43880 : Selectable : 24 months Different models Article code MID Pha. Mod. Amp. Volt. Com. Con. mode Dig. Tot. energy 1 Acc. Class Register Backlight Battery Impuls Infra Red DZT6013 x A 220/380V IEC1107 Direct LCD 7+1 x F+R x Yes DZT6145 x 3 5 /6A 230/400V x CT LCD 6+2 Yes F+R Yes x 1 Total Energy is calculated as Forward + Reverse (F+R) or Forward only (F) V16 - Inepro - Metering - DZT-Line

17 3 Phase - 7 Module The DZT 6006 is a three phase seven module meter (MID certified) and has an amperage of 100A. The more sophisticated none MID meters DZT 6011, 6037 and 6132 do have Modbus communication and different features like an infra red eye, multi tariff or a battery. Phase and Module The DZT 6011 does have a relay which allows the user to switch the meter on or off. 3 7 DZT 6006 wiring diagram: Features like an infrared eye, multi tariff or a battery. Inepro - Metering - DZT-Line - V17

18 Specifications 3 Phase - 7 Module Technical specifications Height : 100mm Width Depth Mounting Starting current Power consumption Frequency International standard Infra-red Internal relay MultiTarriff Warranty : 122mm : 66mm : DIN rail : 0,004lb : 10VA - 2W : 50 / 50-60Hz : EN (DZT6006), EN , EN , DIN EN50022, DIN43880 : Yes (DZT6011) : Yes (DZT6011) : 2 tariff (DZT6012) Programmable (DZT6037, DZT6132) : 24 months Different models Article code MID Pha. Mod. Amp. Volt. Com. Con. mode Dig. Tot. energy 1 Acc. Class Register Backlight Battery Impuls DZT6006 Yes A 230/400V x Direct LCD 6+1 x F+R x B 1000 DZT6011 x A 230/400V Modbus Direct LCD 6+2 x F+R x DZT6012 x A 230/400V x Direct LCD 5+2 x F+R x DZT6037 x A 230/400V Modbus Direct LCD 6+1 x F+R Yes DZT6038 x A 230/400V x Direct Mech. 6+1 x F+R x DZT6050 x A 230/400V x Direct LCD 6+1 x F+R x DZT6132 x A 230/400V Modbus Direct LCD 6+1 x F+R Yes Total Energy is calculated as Forward + Reverse (F+R) or Forward only (F) V18 - Inepro - Metering - DZT-Line

19 Meterboard Meter - 1 Phase The DZT6214 is a single phase kwh meters that is especially suited for projects where price is an important factor. The DZT6214 has a LCD Display in a small wall mount casing (IP51). It has a high accuracy class (Class 1) and a connection rate up to 60A for use in V AC networks. This meter comes with SO output and and has an excellent long term stability which is designed for IEC and EN standards. Phase and Amoerage 1 60A Our scharply priced 1 phase meterboard meter. Inepro - Metering - DZT-Line - V19

20 Specifications Meterboard meter 1 phase Technical specifications Height : 107mm (153mm with protection cover) Width Depth Mounting Accuracy class : 1 Connection mode Display : 118mm : 50mm : Wall mount casing (IP51) : Direct : LCD Display digits : 5+2 Register Connection mode Starting current S0 output Nominal Voltage (Un) : LCD : Direct : 0,4% of basic current : Yes : 230V AC Operational Voltage : 145/265V Basic current (Ib) Max current (Imax) Operational current range Operational frequency range Int. power consumption Basic error : 5A : 60A : 0,4%Ib~Imax : 50Hz : 0,6W/Phase - 0,3VA/Phase : Standard International standard : IEC , IEC Operating temperature Pulse output Warranty : -30 ~ +70 C : imp/kwh : 24 months V20 - Inepro - Metering - DZT-Line

21 Meterboard Meter - 3 Phase The DZT6215 series are three phase kwh meters that are especially suited for projects where price is an important factor. The DZT6215 has a LCD Display in a wall mount casing (IP51). It has a high accuracy class (Class 1) and a connection rate up to 100A for use in V AC networks. This meter comes with SO output and and has an excellent long term stability which is designed for IEC and EN standards. Phase and Amperage 3 100A Our scharply priced 3 phase meterboard meter. Inepro - Metering - DZT-Line - V21

22 Specifications Meterboard meter 3 phase Technical specifications Height : 230mm Width Depth Mounting Accuracy class : 1 Connection mode Display : 170mm : 72mm : Wall mount casing (IP51) : Direct : LCD Display digits : 5+2 Register Connection mode Starting current S0 output Nominal Voltage (Un) : LCD : Direct : 0,4% of basic current : Yes : 230V AC Operational Voltage : 145/265V Basic current (Ib) Max current (Imax) Operational current range Operational frequency range Int. power consumption Basic error : 5A : 60A : 0,4%Ib~Imax : 50Hz : 0,6W/Phase - 0,3VA/Phase : Standard International standard : IEC , IEC Operating temperature Pulse output Warranty : -15 ~ +70 C : 800 imp/kwh : 24 months V22 - Inepro - Metering - DZT-Line

23 Selection Table - 1 Phase Article code Phase Module MID x Yes x x x Yes Yes Yes Yes Amperage 80A 45A 45A 50A 50A 50A 50A 50A 50A Mounting Din Din Din Din Din Din Din Din Din Register LCD LCD Mech. LCD Mech. Mech. Mech. LCD Mech. Class 1 B 1 1 B B B B B S0 Output Modbus Yes x x x x x x x x M-bus x x x x x x x x x Tariffs Multi Cosphi LCD Yes x x x x x x x x Reactive LCD Yes x x x x x x x x Relay x x x x x x x x x Article code Phase Module n.a. MID x x x x Yes x x x x x x Amperage 80A 80A 80A 60A 80A 80A 100A 80A 80A 60A 60A Mounting Din Din Din Din Din Din Din Din Din Din Wall Register LCD LCD Mech. LCD LCD LCD Mech. LCD LCD LCD LCD Class B B S0 Output Modbus x Yes x Yes Yes x x x Yes Yes x M-bus x x x x x Yes x x x x x Tariffs Cosphi LCD x x x x x x x x x x x Reactive LCD x x x x x x x x x x x Relay x x Yes Yes x x x x x Yes x Inepro - Metering - DZT-Line - V23

24 Selection Table - 3 Phase Article code Phase Module MID x x x x Yes x x Yes x x x x x x Amperage /6A /6A 80A 80A 80A 100A /6A 100A 65A 100A 100A 100A 100A 100A Mounting Din Din Din Din Din Din Din Din Din Din Din Din Din Din Register LCD LCD LCD LCD LCD LCD LCD LCD LCD LCD LCD Mech. LCD LCD Class B 1 1 B S0 Output Modbus Yes x x x x x x x Yes x Yes x x Yes M-bus x x x x x x x Yes x x x x x x Tariffs Multi Multi Multi Multi 1 Cosphi LCD Yes x x x x Yes x x Yes Yes x x x x Reactive LCD Yes x x x x Yes x x Yes Yes x x x x Relay x x x x x x x x Yes x x x x x 1 Programmable V24 - Inepro - Metering - DZT-Line

25 MID Certified Meter Overview The overview below summarizes all our MID Certified meters in the DZT line: Article code Phase Mod. Amp. Voltage Com. Con. mode Digits Tot. energy DZT A 230V x Direct LCD 5+2 x x x B 1000 DZT A 230V x Direct Mech. 5+1 x Yes x B DZT A 230V x Direct Mech. 5+1 x Yes x B 100 DZT A 230V x Direct Mech. 5+1 x Yes x B DZT A 230V x Direct LCD 5+1 Blue Yes x B DZT A 230V x Direct Mech. 5+1 x Yes x B DZT A 230V Modbus Direct LCD 5+2 x Yes x B 1600 DZT A 230/400V x Direct LCD 6+2 Blue Yes Yes B DZT A 230/400V x Direct LCD 6+1 x Yes x B 1000 Acc. Class Register Backlight Battery Impulse Inepro - Metering - DZT-Line - V25