User s Manual. EX i Series. Fanless BOX PC w/intel SkyLake/Kaby Lake. (i3/i5/i7 & Celeron 3965U)(Redhat enterprise 7.

Transcription

1 User s Manual Fanless BOX PC w/intel SkyLake/Kaby Lake (i3/i5/i7 & Celeron 3965U)(Redhat enterprise 7.0/ Linux Kernal 4.11/Win 10 IoT)

2 Copyrights 2016 All rights reserved. The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer. All trademarks are property of their respective owners Liability Disclaimer In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages. Regulatory Information CE Notice Copyrights

3 Contents Copyrights... ii Liability Disclaimer... ii Regulatory Information... ii CE Notice... ii Contents... iii 1. Hardware Setup Packing Contents Quick Tour... 4 Front View... 4 Back View... 4 Front Panel I/O... 5 Back Panel I/O Basic Peripherals Installation... 6 Power Adapter... 6 USB Mouse, USB Keyboard and USB ODD... 7 LAN Cable Turn on the device I/O Definition Power Connector Serial Port VGA Port HDMI DP Specification Mother board. 15

4 1. 1. Hardware Setup 1.1. Packing Contents 1.2. Quick Tour Front View Back View LED Indicator A B A. The Power indicator will glow green when power is on. B. The HDD (SSD) is Working

5 Front Panel I/O I H G F E A B F C D A. Line out / Mic in F. COM 3 B. USB 2.0 G. COM 4 C. USB 2.0 H. COM 5 D. COM 2 I. COM 6 E. COM 1 Back Panel I/O J G H E D C I F A B A. 19VDC in F. DP B. Power Switch G. LAN 1 C. Power Reset Switch H. LAN 2 D. VGA I. USB 3.0 E. HDMI J. Antenna Hole

6 1.3. Basic Peripherals Installation All cables and wires from peripherals to the device are recommended to connected as the direction as shown below. Power Adapter Important! Plug the AC adapter into the Box, and then connect to the mains power supply. Connect the 2-pin output jack of the adapter to the DC in jack on the back panel of the device.

7 USB Mouse, USB Keyboard and USB ODD Connect your USB Mouse, USB Keyboard and USB ODD to USB ports on the front or back panel of the device. LAN Cable Connect one end of RJ-45 LAN cable to the LAN port on the back panel of the device, another end to your network device.

8

9 1.5. Turn on the device 1. Make sure all peripherals are connected properly. 2. Press and hold the power switch until the power indicator on the back panel glow green. Power Switch

10 2. 2. I/O Definition Please refer the detailed technical information about all I/O ports as followings Power Connector PIN Signal Name PIN Signal Name 1 19V 3 GND 2 GND

11 2.2. Serial Port COM1, 3, 4, 5 Pin NO. R232 Pin NO. R232 1 DCD 6 DSR 2 RXD 7 RTS 3 TXD 8 CTS 4 DTR 9 RI 5 GND COM 2 Pin NO. R485 Pin NO RS RS COM 6 Pin NO. R232 Pin NO. R RXD 7-3 TXD GND

12 2.3. VGA Port VGA DE-15 PIN Description PIN Description 1 RED 9 KEY/PWR 2 GREEN 10 GND 3 BLUE 11 ID0/RES 4 ID2/RES 12 ID1/SDA 5 GND 14 VSync 6 RED_RTN 15 ID3/SCL 7 GREEN_RTN 8 BLUE_RTN 2.4. HDMI HDMI PIN Signal Name PIN Signal Name 1 TMDS Data2+ 11 TMDS Clock Shield 2 TMDS Data2 Shield 12 TMDS Clock 3 TMDS Data2 13 CEC 4 TMDS Data1+ 14 Reserved(N.C. on device) 5 TMDS Data1 Shield 15 SCL(I²C serial clock for DDC) 6 TMDS Data1 16 SDA(I²C serial data for DDC) 7 TMDS Data0+ 17 DDC/CEC Ground 8 TMDS Data0 Shield V Power 9 TMDS Data0 19 Hot Plug Detect 10 TMDS Clock+ 20 TMDS Clock Shield

13 2.5. DP DP PIN Signal Name PIN Signal Name 1 ML_Lane 0(p) 11 GND 2 GND 12 ML_Lane 3(n) 3 ML_Lane 0(n) 13 GND 4 ML_Lane 1(p) 14 GND 5 GND 15 AUX_CH(p) 6 ML_Lane 1(n) 16 GND 7 ML_Lane 2(p) 17 AUX_CH(n) 8 GND 18 Hot Plug 9 ML_Lane 2(n) 19 DP_PWR Return 10 ML_Lane 3(p) 20 DP_PWR

14 3. 3. Specification Main Board CPU SkyLake I5-6300U (Dual Core, 3M Cache, up to 3.00 GHz) I5-6200U (Dual Core, 3M Cache, up to 2.80 GHz) I3-6100U (Dual Core, 3M Cache, up to 2.30 GHz) Kaby Lake I7-7500U (Dual Core, 4M Cache, up to 3.90 GHz) I5-7300U (Dual Core, 3M Cache, up to 3.50 GHz) I3-7100U (Dual Core, 3M Cache, 2.40 GHz) Celeron 3965U (Dual Core, 2 MB Cache, 2.2 GHz) Graphic System Memory Intel HD Graphics 520 (Skylake) Intel HD Graphics 620 / 610 (Kabylake) DDR3L-1333/1600; Up to 32GB

15 Cooling Solution BIOS Fanless conductive thermal module AMI UEFI BIOS OS Windows 10 / Linux Kernel 4.11 Storage Device Interface SATA-3 x 1 + msata x SSD or HDD (Option) or msata SSD (Option) I/O Ports USB USB 3.0 x 2, USB 2.0 x 4 Giga LAN Gigabit Ethernet by RJ-45 x 2 Display Port HDMI Type A Female Connector x 1 VGA x 1 DP x 1 Audio Port Line Out /in x 1 COM Port COM 1, 3, 4, 5: RS232 COM 2: RS485 (Data+, Data-) COM 6: RS232 (TX, RX only) System Button DC-in Power Power On / Off Switch x 1 Reset Switch X1 19V DC input- lockable (9 ~ 28V wide voltage range) Antenna Hole Wi-Fi Antenna Hole x 2 Wireless Connectivities Mini PCI-e Slot Support Wifi Module (Option) Indicators Power LED x 1, HDD LED x 1

16 Others Mounting mechanism Support wall mount Color Black Material Metal enclosure Certifications Dimension ( WxDxH ) Net Weight / Gross Weight CE / FCC / WEEE / RoHS 200.0x x 50.0 mm with Wall mount and without Antenna 1.2 kg, 2.64 lb / 2.1kg, 4.63 lb Environmental Conditions Operating Temperature -20 ~ 60 C Storage Temperature -20 ~ 70 C Relative Humidity 20% ~ 85% RH (non-condensing)

17 User s Manual 4. Motherboard

18 Copyrights 2017 All rights reserved. The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer. All trademarks are property of their respective owners Liability Disclaimer In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages. Regulatory Information CE Notice

19 1. Hardware Setup Attentions 1) Notes under a table or figure indicate the difference of models, or alternative definition of specific pin of the header (jumper/connector). 2) Identify the first pin of a header or jumper: Usually, there is a thick line or a triangle near the header s or jumper s pin 1. Square pad, which you can find on the back of the motherboard, is usually used for pin 1.

20 2. Specification Main Board CPU Graphic System Memory Cooling Solution BIOS OS Intel Kaby Lake, Max. TDP 15 Watt: - Intel Core i7-7500u (Dual Core, 4M Cache, up to 3.50 GHz) - Intel Core i5-7300u (Dual Core, 3M Cache, up to 3.50 GHz) - Intel Core i3-7100u (Dual Core, 3M Cache, 2.40 GHz) - Intel Celeron 3965U (Dual Core, 2M Cache, 2.20 GHz) Intel Skylake, Max. TDP 15 Watt: - Intel Core i7-6500u (Dual Core, 4M Cache, up to 3.10 GHz) - Intel Core i5-6200u (Dual Core, 3M Cache, up to 2.80 GHz) - Intel Core i3-6100u (Dual Core, 3M Cache, 2.30 GHz) Skylake: Intel HD Graphics 520 Kaby Lake: Intel HD Graphics 620 / 610 SO-DIMM DDR3L up to 1600MHz x 1, Max. 8GB Fanless conductive thermal module AMI UEFI BIOS Windows 7 (Skylake only) Windows 10 Linux kernel 4.0+ & associated distributions Storage Device HDD or SSD Optional 2.5" HDD or 2.5" SSD x 1 (SATA 3.0 by cable) msata SSD Optional msata SSD x 1 I/O Ports USB USB 3.0 x 2, USB 2.0 x 4 Giga LAN Gigabit Ethernet by RJ-45 x 2 HDMI x 1 Display Port VGA x 1 DP x 1 (Optional) Audio Port Line Out /in x 1 COM 1, 3, 4, 5: RS232 COM Port COM 2: RS485 (Data+, Data-) COM 6: RS232 (TX, RX only) System Power Power On / Off Switch x 1 Button Reset Switch X1 DC-in Locking Jack 9~28V DC input Antenna Hole Wi-Fi Antenna Hole x 2 Wireless Connectivity Mini PCI-e Slot Support WiFi Module (Option) Indicators Power LED x 1, HDD LED x 1 Others Mounting mechanism Support wall mount Color Black Material Metal enclosure Certifications CE / FCC / WEEE / RoHS 20 x 12 x 5 cm (7.9 x 4.7 x 2 inch) Dimension ( WxDxH ) without wall mount and without Antenna

21 Net Weight / Gross Weight Environmental Conditions Operating Temperature Storage Temperature Relative Humidity 1.9 kg, 4.19 lbs / 2.8kg, 6.17 lbs With extended temperature peripherals : -20 ~ 60 C (-4 ~ 140 F) with 0.7m/s air flow -40 ~ 85 C (-40 ~ 185 F) 40 C (non-condensing)

22 3. Location of Jumpers / Headers and Connectors

23 Jumpers / Headers and Connectors 1 Audio Pin Header 15 System Fan Connector 2 Expansion IO Connector 16 DC Power Input Connector 3 Front USB Pin Header 17 PS/2 Pin Header 4 COM2 RS485 Signal Pin Header 18 VGA Pin Header 5 Front Panel Pin Header 19 Clear CMOS Jumper 6 Front USB3 Pin Header 20 msata Slot 7 GPIO Pin Header 21 SATA 3.0 Connector 8 COM6 Pin Header 22 SO-DIMM Slot 9 COM1,3,4,5 Pin Header 23 Mini PCIe Slot 10 SIM Card Pin Header 24 VGA Connector 11 edp Signal Pin Header 25 HDMI 12 Panel VDD Select Jumper 26 LAN Connectors 13 Panel Backlight Control Pin Header 27 USB3.0 Connectors 14 SATA Power Pin Header

24 4. Definition of Jumpers / Headers and Connectors 4.1 Audio Pin Header (4*2 Pin 2.0mm) J_AUDIO1 1 LOUT_R 2 MCIN_R 3 GND 4 GND 5 GND 6 GND 7 LOUT_L 8 MCIN _L 4.2 Clear CMOS Jumper (3*1 Pin 2.54mm) Location Jumper Setting Function CLR_CMOS1 1-2(Default) Normal 2-3 Clear CMOS 4.3 COM2 RS485 Signal Pin Header (2*1 Pin 2.54 mm) J485 1 RS RS COM6 Pin Headers (3*2 Pin 2.00mm) J_COM5-6 1 COM6_RXD 2 Reserved 3 COM6_TXD 4 Reserved 5 GND 6 GND

25 4.5 COM1,3,4,5 Pin Headers (20*2 Pin 2.00mm) 1 COM1_DCD# 2 COM1_RXD 3 COM1_TXD 4 COM1_DTR# 5 GND 6 COM1_DSR# 7 COM1_RTS# 8 COM1_CTS# 9 COM1_RI# 10 GND 11 COM3_DCD# 12 COM3_ RXD 13 COM3_ TXD 14 COM3_DTR# 15 GND 16 COM3_DSR# 17 COM3_RTS# 18 COM3_CTS# J_COM COM3_RI# 21 COM4_DCD# 22 COM4_RXD 23 COM4_TXD 24 COM4_DTR# 25 GND 26 COM4_DSR# 27 COM4_RTS# 28 COM4_CTS# 29 COM4_RI# 30 GND 31 N/C 32 COM5_RXD 33 COM5_TXD 34 COM5_DTR# 35 GND 36 COM5_DSR# 37 COM5_RTS# 38 COM5_CTS# 39 N/C 40 GND 4.6 VGA Pin Header (wafer 12*1 Pin 2.00mm) 1 CRT_ON# 2 CRT_VS 3 CRT_HS 4 GND J_VGA1 5 CRT_R 6 GND 7 CRT_G 8 GND 9 CRT_B 10 GND 11 VGA_SDA 12 VGA_SCL

26 4.7 DC Power Input Connector (wafer 4*1 Pin 2.54mm) DC_IN1 1 +9~28V 2 +9~28V 3 GND 4 GND 4.8 Expansion IO Connector (20*2) Location Connector Pin Definition Pin Definition V V 3 USB0-4 USB2-5 USB0+ 6 USB2+ 7 GND 8 GND 9 SERIRQ 10 GND 11 USB1-12 USB1+ 13 GND 14 SVIO_CLK- 15 SVIO_CLK+ 16 GND 17 PCIE_RX1-18 PCIE_RX1+ SVIO 19 GND 21 WAKE# 22 NC 23 PCIE_TX1-24 PCIE_TX1+ 25 GND 26 LAD3 27 LFRAME# 28 LAD2 29 SIO_GP40SB 30 LAD1 31 SIO_GP10SB 32 LAD V 34 GND V 36 PCI_RST# V 38 SVIO_LCLK V V

27 4.9 GPIO Pin Header (5*2 Pin 2.00mm) 1 PCH_GPP_D17 (0xFDAE0548 Bit0,H) [1] 2 PCH_GPP_D18 (0xFDAE0550 Bit0,H) 3 PCH_GPP_D19 (0XFDAE0558 Bit0,H) 4 PCH_GPP_D20 (0xFDAE0560 Bit0,H) J_GPIO1 5 GND 6 PCH_GPP_G6 (0xFDAC04F0 Bit1,H) 7 PCH_GPP_G7 (0xFDAC04F8 Bit1,H) 8 PCH_GPP_A17 (0xFDAF0488 Bit1,H) 9 PCH_GPP_A16 (0XFDAF0480 Bit1,H) V Note: [1]: H or L means the default voltage is High or Low level Front USB Pin Headers (5*2 Pin 2.00mm) V V F-USB1 F_USB2 3 USB3- [1] 4 USB4- [1] 5 USB3+ [1] 6 USB4+ [1] 7 GND 8 GND Note: 10 GND [1]: F_USB2(pin3/pin5) share the same signal with minipcie, and F_USB2(pin4/pin6) share the same signal with one USB2.0 of SVIO(pin11/pin12). They can t be used simultaneously Front Panel Pin Header (5*2 Pin 2.54 mm) 1 HD LED+ 2 Power LED+ 3 HD LED- 4 Power LED- F_PANEL1 5 GND 6 PWR+ 7 RESET# 8 PWR- 9 N/C

28 4.12 Front USB3 Pin Header (5*2 Pin 2.00mm) V V 3 USB5-4 USB6- F_USB3 5 USB5+ 6 USB6+ 7 GND 8 GND 10 GND 4.13 edp Signal Pin Header (20*2 Pin 1.25mm) 1 VDD [1] 2 VDD [1] 3 Reserved 4 GND 5 VDD [1] 6 VDD [1] 7 Reserved 8 EDP_TX0_D- 9 Reserved 10 EDP_TX0_D+ 11 GND 12 GND 13 Reserved 14 EDP_TX1_D- 15 Reserved 16 EDP_TX1_D+ 17 GND 18 N/C LVDS1 19 Reserved 20 EDP_TX2_D- 21 Reserved 22 EDP_TX2_D+ 23 GND 24 GND 25 Reserved 26 EDP_TX3_D- 27 Reserved 28 EDP_TX3_D+ 29 GND 30 GND 31 N/C 32 EDP_HPD# 33 GND 34 GND 35 Reserved 36 EDP_AUX_D- 37 Reserved 38 EDP_AUX_D+ 39 N/C 40 GND Note: [1]: Panel Power VDD is 3.3V by default, 5V or 12V is selectable by Panel VDD Select Jumper (JC_LVDS1, Location 12).

29 4.14 Panel VDD Select Jumper (3*2 Pin 2.54mm) Location Jumper Setting Function JC_LVDS1 1-2(Default) + 3.3V V V 4.15 Panel Backlight Control Pin Header (6*1 Pin 2.00mm) LVDS_P1 1 GND 2 GND 3 PWM_ADJ 4 LVDS_BKL_EN V V 4.16 SATA Power Pin Headers (wafer 4*1 Pin 2.00mm) P_SATA V 2 GND 3 GND 4 + 5V 4.17 SIM Card Pin Header (6*1 Pin 2.00mm) 1 UIM_PWR 2 GND J_SIM1 3 UIM_DAT 4 UIM_CLK 5 UIM_RST 6 UIM_VPP 4.18 System Fan Connector (3*1 Pin 2.54mm) SYS_FAN 1 GND V 3 FAN Speed Detection 4.19 PS/2 Pin Header (wafer 6*1 Pin 2.0mm) 1 KB_CLK 2 KB_DATA J_KBMS1 3 MS_CLK 4 GND 5 + 5V 6 MS_DATA