ROBO-N201G/G2. User's Manual
|
|
|
- Peregrine Hoover
- 6 years ago
- Views:
Transcription
1 ROBO-N201G/G2 10BASE-T/100BASE-TX/1000BASE-T Ethernet Daughter Board User's Manual P/N: B Version 1.0 Copyright Portwell, Inc., All rights reserved. All other brand names are registered trademarks of their respective owners.
2 Preface Table of Contents How to Use This Manual Chapter 1 Introduction Features of Intel 82540EM ROBO-N201G/G2 Specifications Check List Pin-Assignment Mechanical Drawing Chapter 2 Hardware Installation Chapter 3 Software Installation Driver Installation ROBO-N201G/G2 User s Manual
3 Preface How to Use This Manual The manual describes how to configure your ROBO-N201G/G2 system to meet various operating requirements. It is divided into four chapters, with each chapter addressing a basic concept and operation of Single Board Computer. Chapter 1: Introduction. This chapter presents what you have in the box and gives you an overview of the product specifications and basic system architecture for this Ethernet Daughter Board. Chapter 2: Hardware Installation. This chapter shows you how to mount ROBO-N201G/G2 onto your system board. Chapter 3: Software Installation. This chapter describes how to properly install software drivers, in terms of different operating systems. The content of this manual is subject to change without prior notice. These changes will be incorporated in new editions of the document. Portwell may make supplement or change in the products described in this document at any time. Updates to this manual, technical clarification, and answers to frequently asked questions will be shown on the following web site: ROBO-N201G/G2 User s Manual
4 Introduction Chapter 1 Introduction The ROBO-N201G and ROBO-N201G2 single port and dual 10BASE-T / 100BASE-TX / 1000BASE-T Ethernet Daughter Board are designed to enhance the capability of any existing computer board that has external 68-pin PCI connector. As an auxiliary PCI device, this daughter board is to increase system integration potential, while still keeps a minimum physical system size. The design of this daughter board is completely based on Intel 82540EM 10BASE-T/100BASE-TX/1000BASE-T Gigabit Ethernet chipset that caches up to 64 packet descriptors in a single burst for efficient PCI bandwidth use. In addition, using hardware acceleration, the controller offloads tasks from the CPU, such as TCP/UDP/IP checksum calculations and TCP segmentation. The Intel 82540EM integrates Intel s fourth generation Gigabit MAC design with fully integrated, physical layer circuitry to provide a standard IEEE Ethernet interface for 1000BASE-T, 100BASE-TX, and 10BASE-T applications (802.3, 802.3u, and 802.3ab). The controller designed with a pipeline DMA Unit and 128-bit-wide buses for the fast performance. It handles Gigabit Ethernet traffic with low network latency and minimal internal processing overhead. 1.1 Features of Intel 82540EM The ROBO-N201G/G2 10BASE-T/100BASE-TX/1000BASE-T Ethernet Daughter Board adopts Intel 82540EM Gigabit Ethernet Controller. Features of this Ethernet controller includes: 32-bit PCI bus master interface Efficient PCI-bandwidth usage with caches up to 64 packet descriptors in a single burst Compliant with Advanced Configuration and Power Interface (ACPI) and PCI Power Management specification Hardware offload of TCP/UDP/IP to increased throughput and lower CPU utilization Optimized fetching and write-back mechanisms for efficient system memory and PCI bandwidth usage Moderation interrupt controls enable IT staff to easily create multiple virtual LAN segments ROBO-N201G/G2 User s Manual 1-1
5 Introduction 1.2 ROBO-N201G/G2 Specifications 68-pin external PCI interface One 68-pin external PCI interface for quick installation with spacer/screws Core Logic Chipset Intel 82540EM 10BASE-T / 100BASE-TX / Gigabit Ethernet Controller Standard RJ-45 connector Supports one single port or dual port card with standard RJ-45 connector(s) on it for easy connection LED Indication for LAN Status Supports dual (ROBO-N201G) or four (ROBO-N201G2) LEDs indication for LAN speed, LAN active, and LAN Link Integrity Physical and Environmental Requirements - Outline Dimension (L X W): 76.7mm X 50.7mm - PCB layout: 6-layer - Operating Temperature: 0 o C ~ 60 o C (32 o F ~ 140 o F) - Storage Temperature: -20 o F ~ 80 o F - Relative Humidity: 5% ~ 95%, non-condensing 1.3 Check List Item Model ROBO-N201G ROBO-N201G2 Ethernet Daughter Board 1 pcs 1 pcs Single Port Adapter Card 1 pcs (PA-C2G) - Dual Port Adapter Card - 1 pcs (PA-C2G2) Signal Adapter Cable 1 pcs 2 pcs LED Adapter Cable 1 pcs 1 pcs Mounting Screw 2 pcs 2 pcs Brass Spacer 1 pcs 1 pcs Washer 2 pcs 2 pcs User s Manual 1 pcs 1 pcs Driver Disc 1 pcs 1 pcs ROBO-N201G/G2 User s Manual 1-2
6 Introduction 1.4 Pin-Assignment Component side Solder Side ROBO-N201G/G2 User s Manual 1-3
7 Introduction J1: 68 pin PCI Connector PIN No. Signal Description PIN No. Signal Description 1 VCC 2 AD0 3 AD1 4 AD2 5 AD3 6 AD4 7 AD5 8 AD6 9 AD7 10 GND 11 VCC 12 AD8 13 AD9 14 AD10 15 AD11 16 AD12 17 AD13 18 AD14 19 AD15 20 GND 21 VCC 22 AD16 23 AD17 24 AD18 25 AD19 26 AD20 27 AD21 28 AD22 29 AD23 30 GND 31 VCC 32 AD24 33 AD25 34 AD26 35 AD27 36 AD28 37 AD29 38 AD30 39 AD31 40 GND 41 VCC 42 BE#0 43 BE#1 44 BE#2 45 BE#3 46 PAR 47 Frame# 48 TRDY# 49 IRDY# 50 GND 51 VCC 52 STOP# 53 Devsel# 54 Reserved for PERR# 55 SERR# 56 REQ#2 57 GNT#2 58 Reserved for REQ#3 59 Reserved for GNT#3 60 GND 61 PCI Clock1 62 PCI Clock2 63 PCIRST# 64 LOCK# 65 IRQ#A 66 IRQ#B 67 IRQ#C 68 IRQ#D ROBO-N201G/G2 User s Manual 1-4
8 Introduction JP1: Signal Description PIN No. Signal Description 1 L1_LINK1000# 2 L2_LINK1000# 3 L1_ACTLED# 4 L2_ACTLED# 5 L1_LINKLED# 6 L2_LINKLED# 7 L1_LINK100# 8 L2_LINK100# 9 Signal Ground 10 NC JP2: (LAN1) and JP3 (LAN2) Signal Description PIN No. Signal Description 1 MDI[0]+ 2 MDI[0]- 3 MDI[1]+ 4 MDI[1]- 5 MDI[2]+ 6 MDI[2]- 7 MDI[3]+ 8 MDI[3]- 9 Chassis Ground 10 Chassis Ground (Key) ROBO-N201G/G2 User s Manual 1-5
9 Introduction 1.5 Mechanical Drawing ROBO-N201G/G2 User s Manual 1-6
10 Hardware Installation Chapter 2 Hardware Installation Opening the box After you open ROBO-N201G /G2 package, you should find three hardware items. I. ROBO-N201G/G BASE-T/100BASE-TX/1000BASE T Ethernet Daughter Board. II. Single/Dual Port Adapter card III. ROBO-N201G/G2 Accessories Mounting Screw x 2 Washer x 2 Brass Spacer x 1 Signal Adapter cable x 1 or 2 for ROBO-N201G2 LED Adapter cable x 1 ROBO-N201G/G2 User s Manual 2-1
11 Hardware Installation Installation steps Please follow the steps below to mount ROBO-N201G/G2 correctly onto your system board. Portwell ROBO-8710VLA Single Computer Board with ROBON-N201G2 are used as demonstrated sample here. The same installation step may apply on other Portwell SBC that has 68-pin OmniPCI connector as well. I. Put washer between mounting screw and PCB. II. Fixing mounting screw from the solder side of the system board (ROBO-8710VLA) with brass spacer at component side. III. Mount Ethernet Daughter Board onto the 68-pin OmniPCI connector (J27) of the system board. Fix the Ethernet Daughter Board by screw with washer in the middle. ROBO-N201G/G2 User s Manual 2-2
12 Hardware Installation IV. Plug 2 pcs signal adapter and LED adapter cable onto JP2 (LAN1), JP3 (LAN2) and JP1 (LED) connector of ROBO-N201G2 Ethernet Daughter Board. V. Plug 2pcs signal adapter cables and LED adapter cable onto JP1 (LAN1), JP2 (LAN2) and JP3 (LED connector) of Dual Port Adapter Card. ROBO-N201G/G2 User s Manual 2-3
13 Software Installation Chapter 3 Software Installation 3.1 Driver Installation Please refer to the installation guide in the enclosed Intel Ethernet Driver read-me file. Note: 1. ROBO-N201G/G2 does not support Wake-On-Lan. However, this function is available over ROBO-668 (Intel 82559), ROBO-678 (Intel and 82801BA MAC), ROBO-8710VLA and ROBO-8712VLA (Intel 82562ET/EM). 2. If your operating system does not support multiple Ethernet ports, please ROBO-N201G/G2 before OS installation. Apply ROBO-N201G/G2 onto the board after the completion of OS installation. Drivers Support Please find LAN driver in \Ethernet\IntelPRO\ directory of Driver CD-title. The drivers support Netware, Windows-NT 3.51/4.0, Windows-98/98SE/ME, Windows-2000, Windows-XP, OS2 and \Ethernet\IntelPRO\PRO1000 for Embedded_XP, SCO OpenServer 5.0.2, SCO Unixware 7.0, Solaris, FreeBSD and Linux. (1) Windows-98/98SE/ME: Please execute \Ethernet\IntelPRO\WIN98ME\Pro98me.exe to start Ethernet driver installation. (2) Windows-NT 4.0: Please execute \Ethernet\IntelPRO\WINNT4\pront4.exe to start Ethernet driver installation. (3) Windows-2000/XP: Please execute \Ethernet\IntelPRO\WIN2KXP\Pro2kxp.exe to start Ethernet driver installation. ROBO-N201G/G2 User s Manual 3-1
Preface. To get the most out of this manual, you should have an understanding of Ethernet networking concepts. In this manual, you will find:
Preface This manual describes how to install and use the PCI Express Ethernet Adapter. This allows options of the different fiber connections (such as connector types and segment distance). To get the
HP NC7771 PCI-X 1000T
Overview The NC7771 supports 10/100/1000Mbps Ethernet speeds as well as a PCI-X 64-bit/133MHz data path and it is backwards compatible with existing PCI bus architectures. This range of features enables
QuickSpecs. Integrated NC7782 Gigabit Dual Port PCI-X LOM. Overview
Overview The integrated NC7782 dual port LOM incorporates a variety of features on a single chip for faster throughput than previous 10/100 solutions using Category 5 (or better) twisted-pair cabling,
QuickSpecs. NC7771 PCI-X 1000T Gigabit Server Adapter. HP NC7771 PCI-X 1000T Gigabit Server Adapter. Overview
Overview The NC7771 supports 10/100/1000Mbps Ethernet speeds as well as a PCI-X 64-bit/133MHz data path and it is backwards compatible with existing PCI bus architectures. Additionally, the NC7771 ships
OPERATIONS MANUAL PPM-GIGABIT
OPERATIONS MANUAL PPM-GIGABIT NOTE: This manual has been designed and created for use as part of the WinSystems Technical Manuals CD and/or the WinSystems website. If this manual or any portion of the
Models Compaq NC3123 Fast Ethernet Adapter PCI, 10/100 WOL B21 Single B22 5-Pack
Overview Models Compaq NC3123 Fast Ethernet Adapter PCI, 10/100 WOL 174830-B21 Single 174830-B22 5-Pack The Compaq NC3123 Fast Ethernet Adapter provides high-performance and feature-rich functionality
QuickSpecs. HP NC6170 PCI-X Dual Port 1000SX Gigabit Server Adapter. Overview. Retired
The is a dual port fiber Gigabit server adapter that runs over multimode fiber cable. It is the first HP server adapter to combine dual port Gigabit Ethernet speed with PCI-X bus technology for fiber-optic
PCIe Dual Port Gigabit Server. Adapter
PCIe Dual Port Gigabit Server Adapter User Manual Ver. 2.01 All brand names and trademarks are properties of their respective owners. Contents: Chapter 1: Introduction... 3 1.1 Product Introduction...
D-Link DGE-528T. Gigabit Ethernet PCI Adapter. User Manual. Rev.5.0
D-Link DGE-528T Gigabit Ethernet PCI Adapter User Manual Rev.5.0 1 Table of Contents 1. Introduction... 3 System Requirement... 3 Features... 4 Driver Support... 4 2. Installation... 5 Unpack and Inspect...
Gigabit Network Card user manual Model
Gigabit PCI Network Card user manual Model 522328 INT-522328-UM-0108-01 Thank you for purchasing the INTELLINET NETWORK SOLUTIONS Gigabit PCI Network Card, Model 522328. A high-performance network adapter
Introduction CHAPTER 1
CHAPTER 1 Introduction The ROBO-667 all-in-one single board computer is designed to fit a high performance Pentium-III based CPU and compatible for high-end computer system with PCI/ISA Bus architecture.
PCIe 10G 5-Speed. Multi-Gigabit Network Card
PCIe 10G 5-Speed Multi-Gigabit Network Card User Manual Ver. 2.00 All brand names and trademarks are properties of their respective owners. Contents: Chapter 1: Introduction... 3 1.1 Product Introduction...
MIC-3665A/B. Advantech CompactPCI. Modular Industrial Computer. Dual Gigabit Ethernet PMC Function Modules
MIC-3665A/B Dual Gigabit Ethernet PMC Function Modules Advantech CompactPCI Modular Industrial Computer Copyright Notice This document is copyrighted, 2004. All rights are reserved. The original manufacturer
The ROBO-8710VLA package should cover the following basic items
The ROBO-8710VLA all-in-one full size single board computer is designed to fit high performance and scalable Intel Pentium 4/Celeron processors and compatible for high-end industrial computer system with
NVR-CV. Network Video Recorder Hot-Swappable Tray for 3.5 HDD x 4 or 2.5 HDD x 4 Gigabit Ethernet x 2 COM x 2, USB2.0 x 6. VGA x 1, DVI-D x 1
Netw ork Video Recorder N V R - CV Network Video Recorder Hot-Swappable Tray for 3.5 HDD x 4 or 2.5 HDD x 4 Gigabit Ethernet x 2 COM x 2, USB2.0 x 6 VGA x 1, DVI-D x 1 Manual 1st Ed. Oct. 2013 Copyright
PCI Express Gigabit Ethernet Adapter. User's Guide
PCI Express Gigabit Ethernet Adapter User's Guide FCC Certifications This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
OE2G2I35 Dual Port Copper Gigabit Ethernet OCP Mezzanine Adapter Intel I350BT2 Based
OE2G2I35 Dual Port Copper Gigabit Ethernet OCP Mezzanine Adapter Intel I350BT2 Based Product Description Silicom s Gigabit Ethernet Open Compute Project (OCP) mezzanine adapter is designed for use with
Introduction Electrical Considerations Data Transfer Synchronization Bus Arbitration VME Bus Local Buses PCI Bus PCI Bus Variants Serial Buses
Introduction Electrical Considerations Data Transfer Synchronization Bus Arbitration VME Bus Local Buses PCI Bus PCI Bus Variants Serial Buses 1 Most of the integrated I/O subsystems are connected to the
4-Port Gigabit Ethernet Network Card - PCI Express, Intel I350 NIC
4-Port Gigabit Ethernet Network Card - PCI Express, Intel I350 NIC Product ID: ST4000SPEXI Here s a dependable and cost-effective way to add four high-performance Gigabit Ethernet ports to your server
Gigabit Server Network Interface Cards Copper and Fiber
DATA SHEET Gigabit Server Network Interface Cards Copper and Fiber Key Benefits Tenfold Throughput Boost Accelerate your Fast Ethernet server connection to 1000 Mbps. 3Com gigabit server network interface
Retired. HP NC7771 PCI-X 1000T Gigabit Server Adapter Overview
Overview The NC7771 supports 10/100/1000Mbps Ethernet speeds as well as a PCI-X 64-bit/133MHz data path and it is backwards compatible with existing PCI bus architectures. Additionally, the NC7771 ships
PC/104+ to PCMCIA PC-Card/CardBus Adapter. Model 335 (Rev.A)
SENSORAY CO., INC. PC/104+ to PCMCIA PC-Card/CardBus Adapter Model 335 (Rev.A) August 15, 2007 Sensoray 2007 7313 SW Tech Center Dr. Tigard, OR 97223 Phone 503.684.8005 Fax 503.684.8164 www.sensoray.com
10/100/1000Mbps PCI Gigabit Ethernet Adapter
10/100/1000Mbps PCI Gigabit Ethernet Adapter 64-bit Model: 64/32-bit, 66/33MHz PCI 32-bit Model: 32-bit, 66/33MHz PCI User s Manual This equipment has been tested and found to comply with the limits of
PE3G4TSFI35P Quad Port Fiber Gigabit Ethernet PCI Express Time Stamp Server Adapter Intel Based
PE3G4TSFI35P Quad Port Fiber Gigabit Ethernet PCI Express Time Stamp Server Adapter Intel Based Product Description Silicom s Quad SFP Gigabit Ethernet PCI Express Time Stamping server adapter is designed
PBP-06V4. Horizontal 4 PCI/2 PICMG Passive Backplane. Introduction. Design Philosophy
PBP-06V4 T Horizontal 4 PCI/2 PICMG Passive Backplane He PBP-06V4 backplane is fully PICMG Rev 2.1 compliant. It is a member of PBP s PCI product family and is intended to support all PICMG compliant boards
QuickSpecs. Models. HP NC380T PCI Express Dual Port Multifunction Gigabit Server Adapter. Overview
Overview The HP NC380T server adapter is the industry's first PCI Express dual port multifunction network adapter supporting TOE (TCP/IP Offload Engine) for Windows, iscsi (Internet Small Computer System
cpci-8273 Advance Technologies; Automate the World. 3 Port IEEE 1394a 3U CompactPCI Card User s Manual Manual Rev. 2.00
cpci-8273 3 Port IEEE 1394a 3U CompactPCI Card User s Manual Manual Rev. 2.00 Revision Date: November 18, 2004 Part No: 50-15036-100 Advance Technologies; Automate the World. Copyright 2004 ADLINK TECHNOLOGY
USB-C to Gigabit Network Adapter
USB-C to Gigabit Network Adapter Product ID: US1GC30B Now, you can easily connect to a Gigabit network through the USB -C or Thunderbolt 3 port on your laptop or desktop computer. This Gigabit Ethernet
PE2G6I35 Six Port Copper Gigabit Ethernet PCI Express Server Adapter Intel i350am2 Based
PE2G6I35 Six Port Copper Gigabit Ethernet PCI Express Server Adapter Intel i350am2 Based Product Description Silicom s Six Port Copper Gigabit Ethernet PCI Express Server adapter is PCI-Express X8 network
TPCE260. PCI Express PMC Carrier. Version 1.0. User Manual. Issue August 2014
The Embedded I/O Company TPCE260 PCI Express PMC Carrier Version 1.0 User Manual Issue 1.0.1 August 2014 TEWS TECHNOLOGIES GmbH Am Bahnhof 7 25469 Halstenbek, Germany Phone: +49 (0) 4101 4058 0 Fax: +49
NIC-PCIE-4RJ45-PLU PCI Express x4 Quad Port Copper Gigabit Server Adapter (Intel I350 Based)
NIC-PCIE-4RJ45-PLU PCI Express x4 Quad Port Copper Gigabit Server Adapter (Intel I350 Based) Quad-port Gigabit Ethernet server adapters designed with performance enhancing features and new power management
USB-C to Gigabit Network Adapter - Silver
USB-C to Gigabit Network Adapter - Silver Product ID: US1GC30A Now, you can easily connect to a Gigabit network through the USB-C port on your laptop. This Gigabit Ethernet (GbE) network adapter delivers
USB 3.0 Dual Port Gigabit. Ethernet Cable
USB 3.0 Dual Port Gigabit Ethernet Cable User Manual Ver. 1.00 All brand names and trademarks are properties of their respective owners. Contents: Chapter 1: Introduction... 3 1.1 Product Introduction...
XE1-P241. XE1-P241 PCI Express PCIe x4 Dual SFP Port Gigabit Server Adapter (Intel I350 Based) Product Highlight
Product Highlight o Halogen-free dual-port Gigabit Ethernet adapters with fiber interface options o Innovative power management features including Energy Efficient Ethernet (EEE) and DMA Coalescing for
Typical System Implementation
PCI Typical System Implementation CPU Cache Memory Subsystem DRAM Subsystem Host Bus PCI Local Bus PCI Bridge/ Memory Controller ISA Bus Bridge ISA Bus PCI Add-in Slots ISA Add-in Slots PCI 2 Desktop Platforms
Reference board User Guide for PI7C8152 By Glenn Sanders
Reference board User Guide for PI7C8152 By Glenn Sanders Introduction The Pericom PI7C8152 PCI-to-PCI bridge evaluation board demonstrates the bridge and allows testing of key features either before or
Mercator II User Manual
Mercator II User Manual PC/104-Plus I/O Module with 2 Dual 10/100 Ethernet Switches and DIO Revision Date Comment A 11/19/2012 Initial Release A.1 5/2/13 Minor update with enhanced Ethernet description
1-Port Gigabit Ethernet Network Card - PCI Express, Intel I210 NIC
1-Port Gigabit Ethernet Network Card - PCI Express, Intel I210 NIC Product ID: ST1000SPEXI Boost the performance and capabilities of your server or desktop computer by adding a Gigabit Ethernet port through
Combo-card convenience and cost-savings
3-port PCI Express USB 3.0 card + Gigabit Ethernet StarTech ID: PEXUSB3S3GE This PCIe USB 3.0 card couples your peripheral and network connections into a single, scalable solution. By combining three USB
Product Specification NIC-1G-2PF. A-GEAR PRO Gigabit PF Dual Post Server Adapter NIC-1G-2PF. datasheet A-GEAR World Wide Manufacturing
Product Specification NIC-1G-2PF A-GEAR PRO Gigabit PF Dual Post Server Adapter Apply two Gigabit Fiber SFP ports server connections in a single PCI Express * slot. 1. Features Build on PCI Express Technology
2-Port Gigabit Ethernet PCIe Card
2-Port Gigabit Ethernet PCIe Card User Manual Ver. 1.00 All brand names and trademarks are properties of their respective owners. Contents: Chapter 1: Introduction... 3 1.1 Product Introduction... 3 1.2
TABLE OF CONTENTS 1. INTRODUCTION 2. SPECIFICATION 3. HARDWARE INSTALLATION 6EM 1.1. PREFACE KEY FEATURES PERFORMANCE LIST...
6EM TABLE OF CONTENTS 1. INTRODUCTION 1.1. PREFACE...1-1 1.2. KEY FEATURES...1-1 1.3. PERFORMANCE LIST...1-2 1.4. BLOCK DIAGRAM...1-3 1.5. INTRODUCE THE Pentium II Processor & AGP...1-4 1.6 What is AGP?...1-6
cpci-pci Adapter Technical Reference Manual cpci-pci Adapter Reference Manual Version 1.0
cpci-pci Adapter Reference Manual Version 1.0 The cpci-pci Adapter has been designed by: N.A.T. GmbH Kamillenweg 22 D-53757 Sankt Augustin Phone: ++49/2241/3989-0 Fax: ++49/2241/3989-10 E-Mail: sales@nateurope.com
USB-C to Gigabit Ethernet Adapter - USB 3.0
USB-C to Gigabit Ethernet Adapter - USB 3.0 Product ID: US1GC30DB This USB-C to Gigabit Ethernet adapter lets you connect easily to a wired Ethernet network, with full Gigabit bandwidth support, through
PRO/1000 PT Dual Port Server Adapter
Product Brief Network Connectivity Intel PRO/1000 PT Dual Port Server Adapter Two Gigabit Copper Server Connections in a Single PCI Express* Slot Two high-performance PCI Express 10/100/1000 Mbps connections
TABLE OF CONTENTS 1. INTRODUCTION 2. SPECIFICATION 3. HARDWARE INSTALLATION 6BA
6BA TABLE OF CONTENTS 1. INTRODUCTION 1.1. PREFACE...1-1 1.2. KEY FEATURES...1-1 1.3. PERFORMANCE LIST...1-2 1.4. BLOCK DIAGRAM...1-3 1.5. INTRODUCE THE Pentium II / III Processor...1-4 1.6. What is AGP?...1-5
PE2G4B19L Quad Port Copper Gigabit Ethernet PCI Express Server Adapter Broadcom BCM5719 Based
PE2G4B19L Quad Port Copper Gigabit Ethernet PCI Express Server Adapter Broadcom BCM5719 Based Product Description Silicom s Quad Port Copper Gigabit Ethernet PCI Express Server adapter is PCI-Express X4
PCI Express Gigabit Ethernet Adapter. User's Guide
PCI Express Gigabit Ethernet Adapter User's Guide FCC Certifications This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Introducing. QuickLogic s The Basics of PCI. QuickPCI - The PCI Solution for System Needs
Introducing QuickLogic s The Basics of PCI QuickPCI - The PCI Solution for System Needs Typical System Implementation CPU Cache Memory Subsystem DRAM Subsystem Host Bus PCI Local Bus PCI Bridge/ Memory
Preface. To get the most out of this manual, you should have an understanding of Ethernet networking concepts. In this manual, you will find:
Preface This manual describes how to install and use the PCI Express Gigabit Ethernet Adapter. This PCI Express Gigabit Ethernet Adapter allows options of different fiber connections (such as connector
QuickSpecs. Models HP NC364T PCI Express Quad Port Gigabit Server Adapter B21. HP NC364T PCI Express Quad Port Gigabit Server Adapter.
DA - 12701 Worldwide Version 1 3.26.2007 Page 1 Overview The HP NC364T PCI Express Quad-Port Gigabit Server features four 10/100/1000T Gigabit Ethernet ports on a single card, saving valuable server I/O
PE2G6SFPI35 Six Port SFP Gigabit Ethernet PCI Express Server Adapter Intel i350am4 Based
PE2G6SFPI35 Six Port SFP Gigabit Ethernet PCI Express Server Adapter Intel i350am4 Based Product Description Silicom s Six Port SFP Gigabit Ethernet PCI Express Server adapter is PCI-Express X8 network
LevelOne. User Manual. USB Fast Ethernet Adapter USB Ver. 1.0
LevelOne User Manual USB-0301 USB Fast Ethernet Adapter Ver. 1.0 ABOUT THIS MANUAL This manual provides a beginner's introduction to installing, configuring and using the USB2.0 Ethernet Adapter. Information
PE310G4BPI40-T Bypass Adapter Quad port Copper 10 Gigabit Ethernet PCI Express Bypass Server Intel x540 Based
PE310G4BPI40-T Bypass Adapter Quad port Copper 10 Gigabit Ethernet PCI Express Bypass Server Intel x540 Based Product Description Silicom s quad port Copper 10 Gigabit Ethernet Bypass server adapter is
1-Port PCIe 10GBase-T / NBASE-T Ethernet Network Card
1-Port PCIe 10GBase-T / NBASE-T Ethernet Network Card Product ID: ST10GSPEXNB This 5-speed network adapter card offers versatile and cost-efficient network connectivity. It lets you add an Ethernet port
TABLE OF CONTENTS 1. INTRODUCTION 2. SPECIFICATION 3. HARDWARE INSTALLATION 6EX 1.1. PREFACE KEY FEATURES PERFORMANCE LIST...
6EX TABLE OF CONTENTS 1. INTRODUCTION 1.1. PREFACE...1-1 1.2. KEY FEATURES...1-1 1.3. PERFORMANCE LIST...1-2 1.4. BLOCK DIAGRAM...1-3 1.5. INTRODUCE THE Pentium II Processor & AGP...1-4 1.6 What is AGP?...
ROBO-603. User's Manual
ROBO-603 Embedded System Board User's Manual P/N: 861106030041 Version 1.0 Copyright Portwell, Inc., 2001. All rights reserved. All other brand names are registered trademarks of their respective owners.
Models HP NC320T PCI Express Gigabit Server Adapter B21
Overview The HP NC320T server adapter is a single port Gigabit Ethernet network adapter for Local Area Networks using copper cabling. The NC320T is a single lane (x1), serial device designed for PCI Express
IQEXTENDER IQ Module. Board Manual. March Order Number:
IQEXTENDER IQ Module Board Manual March 1998 Order Number: 272942-002 Information in this document is provided in connection with Intel products. No license, express or implied, by estoppel or otherwise,
Manual. esata PCI Card 1+1. english.
Manual esata PCI Card 1+1 english Manual_Page 2 Trademarks All names and products mentioned below are registered trademarks of their respective companies. Product Features PCI 2.3 compliant interface Supports
CM17215HR 100MB/s Fiber CM17212HR 10/100MB/s UTP PC/104-Plus Dual Ethernet utilitymodule. User s Manual. BDM Rev. A
CM17215HR 100MB/s Fiber CM17212HR 10/100MB/s UTP PC/104-Plus Dual Ethernet utilitymodule User s Manual BDM-610020066 Rev. A CM17215HR 100MB/s Fiber CM17212HR 10/100MB/s Twisted Pair PC/104-Plus Dual Ethernet
OPERATIONS MANUAL PPM-USB2
OPERATIONS MANUAL PPM-USB2 WinSystems reserves the right to make changes in the circuitry and specifications at any time without notice. Copyright 2004 by WinSystems. All Rights Reserved. REVISION HISTORY
Older PC Implementations
PCI Older PC Implementations 2 Newer PC Implementations 3 Server Platforms 4 PCI Overview 5 PCI Features 32-Bit or 64-Bit address and data 66 or 33 down to 0 MHz synchronous operation Single or multiple
LREC9030PF PCIe x1 100FX Desktop Fiber Ethernet Adapter (Intel Based)
LREC9030PF PCIe x1 100FX Desktop Fiber Ethernet Adapter (Intel 82574 Based) Descriptions: LREC9030PF-SFP is a typical model of 100FX Ethernet adapter, based on Intel 82574 Ethernet Controller, researched
LevelOne. User Manual. USB-0301 USB Fast Ethernet Adapter
LevelOne User Manual USB-0301 USB Fast Ethernet Adapter ABOUT THIS MANUAL This manual provides a beginner's introduction to installing, configuring and using the USB2.0 Ethernet Adapter. Information in
5-Speed NBASE-T Network. Controller Card
5-Speed NBASE-T Network Controller Card User Manual Ver. 1.00 All brand names and trademarks are properties of their respective owners. Contents: Chapter 1: Introduction... 3 1.1 Product Introduction...
CM17202 PC/104-Plus Fast Ethernet Controller utilitymodule. User s Manual. BDM Rev. A
CM17202 PC/104-Plus Fast Ethernet Controller utilitymodule User s Manual BDM-610020025 Rev. A CM17202 PC/104-Plus Fast Ethernet Controller utilitymodule User s Manual RTD Embedded Technologies, INC. 103
2-port PCIe 10GBase-T / NBASE-T Ethernet Network Card - with Intel X550 Chip
2-port PCIe 10GBase-T / NBASE-T Ethernet Network Card - with Intel X550 Chip Product ID: ST10GPEXNDPI This dual-port network card offers versatile and cost-efficient network connectivity, by increasing
Sensoray Model 623 PC/104+ to PCI Adapter. Revised December 19, Sensoray Model 623 Instruction Manual 1
Sensoray Model 623 PC/104+ to PCI Adapter Revised December 19, 2003 Sensoray Model 623 Instruction Manual 1 TABLE OF CONTENTS LIMITED WARRANTY... 3 SPECIAL HANDLING INSTRUCTIONS... 3 1. INTRODUCTION...
FCC Class B Statement
FCC Class B Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any
Installation Manual. Introduction
Installation Manual Introduction This 5.25 enclosure is designed to provide a solution to connect existing storage devices such as 3.5 IDE hard drive, MO drives, CD devices or DVD devices to IEEE1394a
PCM-4153-A2 PC/104+ SBC w/amd LX800, VGA, LCD, Dual LAN, USB 2.0, On-board Flash and Memory Startup Manual
PCM--A PC/0+ SBC w/amd LX800, VGA, LCD, Dual LAN, USB.0, On-board Flash and Memory Startup Manual Packing List Specifications Before you begin installing your card, please make sure that the following
PCI Host Controller 14a Hardware Reference Release 1.2 (October 16, 2017)
PCI Host Controller 14a Hardware Reference 1 PCI Host Controller 14a Hardware Reference Release 1.2 (October 16, 2017) Purpose: Host Controller to support the PCI bus according to the PCI/104 specification.
PE2G4SFPI35L Quad Port SFP Gigabit Ethernet PCI Express Server Adapter Intel i350am4 Based
PE2G4SFPI35L Quad Port SFP Gigabit Ethernet PCI Express Server Adapter Intel i350am4 Based Product Description Silicom s Quad Port SFP Gigabit Ethernet PCI Express Server adapter is PCI-Express X4 SFP
M1E340G2Qi71 Fiber (SR4) 40 Gigabit Ethernet PCI Express Module Server Adapter
M1E340G2Qi71 Fiber (SR4) 40 Gigabit Ethernet PCI Express Module Server Adapter Product Description Silicom s 40 Gigabit Ethernet PCI Express Module server adapters are designed for Servers and high-end
QuickSpecs. Models. HP NC110T PCI Express Gigabit Server Adapter. Overview. Retired
Overview The HP NC110T is a cost-effective Gigabit Ethernet server adapter that features single-port, copper, single lane (x1) PCI Express capability, with 48KB onboard memory that provides 10/100/1000T
1000Base-SX (SC) Multi-Mode Fiber Gigabit PCI Express Card PEX1000MMSC
1000Base-SX (SC) Multi-Mode Fiber Gigabit PCI Express Card PEX1000MMSC FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
PE310G4TSF4I71 Quad Port SFP+ 10 Gigabit Ethernet PCI Express Time Stamp Server Adapter Intel Based
PE310G4TSF4I71 Quad Port SFP+ 10 Gigabit Ethernet PCI Express Time Stamp Server Adapter Intel Based Product Description Silicom s 40 Gigabit Ethernet PCI Express Time Stamping server adapter is designed
USB-C to Gigabit Network Adapter with Extra USB 3.0 Port
USB-C to Gigabit Network Adapter with Extra USB 3.0 Port Product ID: US1GC301AU Now, you can easily connect to a Gigabit network through the USB-C or Thunderbolt 3 port on your laptop or desktop computer,
PE2G4SFPI80 Quad Port SFP Gigabit Ethernet PCI Express Server Adapter Intel 82580EB Based
PE2G4SFPI80 Quad Port SFP Gigabit Ethernet PCI Express Server Adapter Intel 82580EB Based Product Description Silicom s Quad Port SFP Gigabit Ethernet PCI Express Server adapter is PCI-Express X4 SFP Gigabit
USB Type-C Dual Port Gigabit. Ethernet Cable
USB Type-C Dual Port Gigabit Ethernet Cable User Manual Ver. 1.00 All brand names and trademarks are properties of their respective owners. Contents: Chapter 1: Introduction... 3 1.1 Product Introduction...
PCM-9584 Onboard Intel Pentium M EBX SBC with Audio, VGA 2LVDS and LAN
PCM-9584 Onboard Intel Pentium M EBX SBC with Audio, VGA 2LVDS and LAN Packing List Before you begin installing your card, please make sure that the following materials have been shipped: 1 PCM-9584 all-in-one
NPCI-PMC Technical Reference Manual
NPCI-PMC PCI Carrier for PMC Modules Technical Reference Manual V1.2 HW Revision 1.1 The NPCI-PMC has been designed by: N.A.T. GmbH Kamillenweg 22 D-53757 Sankt Augustin Phone: ++49/2241/3989-0 Fax: ++49/2241/3989-10
PCIe 10G SFP+ Network Card
PCIe 10G SFP+ Network Card User Manual Ver. 1.00 All brand names and trademarks are properties of their respective owners. Contents: Chapter 1: Introduction... 3 1.1 Product Introduction... 3 1.2 Features...
ACROMAG INCORPORATED Tel: (248) South Wixom Road Fax: (248) P.O. BOX 437 Wixom, MI U.S.A.
APC-PMC USER S MANUAL ACROMAG INCORPORATED Tel: (248) 295-0310 30765 South Wixom Road Fax: (248) 624-9234 P.O. BOX 437 Wixom, MI 48393-7037 U.S.A. Copyright 2005, Acromag, Inc., Printed in the USA. Data
A-GEAR 10Gigabit Ethernet Server Adapter X520 2xSFP+
Product Specification NIC-10G-2BF A-GEAR 10Gigabit Ethernet Server Adapter X520 2xSFP+ Apply Dual-port 10 Gigabit Fiber SFP+ server connections, These Server Adapters Provide Ultimate Flexibility and Scalability
PICMG Backplane. 13-slot (4xPCI) PICMG Backplane - Fit for 14-slot chassis - Special design for full-length PCI cards
PICMG PICMG GENERAL DESCRIPTION PICMG in this section are SBC (Single Board Computer)/SHB (Single Host Board) companion that feature expansion slots such as ISA, PCI, PCI-X or PCI Express interface. In
PICMG Backplane. Passive Backplane: Backplane that only support up to four PCI master PICMG GENERAL DESCRIPTION PICMG 1.
PICMG PICMG GENERAL DESCRIPTION PICMG in this section are SBC (Single Board Computer)/SHB (Single Host Board) companion that feature expansion slots such as ISA, PCI, PCI-X or PCI Express interface. In
PE2G6BPi35 Six Port Copper Gigabit Ethernet PCI Express Bypass Server Adapter Intel based
PE2G6BPi35 Six Port Copper Gigabit Ethernet PCI Express Bypass Server Adapter Intel based Description Silicom s Six Port Copper Gigabit Ethernet PCI Express Bypass Server adapter is PCI-Express X8 network
Introduction to the PCI Interface. Meeta Srivastav
Introduction to the PCI Interface Meeta Srivastav 4 th March, 2005 Talk layout BUS standards PCI Local Bus PCI protocol Special Cases Electrical and Mechanical Specifications Other Topics 2 Inside a Computer
IT and Instrumentation for industry. CE5-CADENZA CompactPCI Hostadapter Quad Serial ATA Controller & 2.5-Inch Hard Disk Drive
CE5-CADENZA CompactPCI Hostadapter Quad Serial ATA Controller & 2.5-Inch Hard Disk Drive The CE5-CADENZA from EKF is a quad port Serial ATA hostadapter, compliant with.0 specification. The CompactPCI board
PE340G2BPI71 Dual Port Fiber 40 Gigabit Ethernet PCI Express Bypass Server Adapter Intel XL710 Based
PE340G2BPI71 Dual Port Fiber 40 Gigabit Ethernet PCI Express Bypass Server Adapter Intel XL710 Based Product Description Silicom s 40 Gigabit Ethernet PCI Express Bypass server adapters are designed for
PCI Express 10 Gigabit Ethernet Fiber Network Card w/ Open SFP+ - PCIe x4 10Gb NIC SFP+ Adapter
PCI Express 10 Gigabit Ethernet Fiber Network Card w/ Open SFP+ - PCIe x4 10Gb NIC SFP+ Adapter Product ID: PEX10000SFP The PEX10000SFP 10 Gigabit Fiber Network Card is a cost-effective solution that delivers
CM17215HR 100Mb/s Fiber CM17212HR 10/100Mb/s UTP PC/104-Plus Dual Ethernet utilitymodule. User s Manual
CM17215HR 100Mb/s Fiber CM17212HR 10/100Mb/s UTP PC/104-Plus Dual Ethernet utilitymodule User s Manual ISO9001 and AS9100 Certified BDM-610020066 Rev. E CM17215HR 100Mb/s Fiber CM17212HR 10/100Mb/s Twisted
TABLE OF CONTENTS 1. INTRODUCTION 2. SPECIFICATION 3. HARDWARE INSTALLATION. Table of Contents 1.1. PREFACE KEY FEATHERS...
Table of Contents TABLE OF CONTENTS 1. INTRODUCTION 1.1. PREFACE... 1-1 1.2. KEY FEATHERS... 1-1 1.3. PERFORMANCE LIST... 1-2 1.4. BLOCK DIAGRAM... 1-3 1.5. INTRODUCE THE PENTIUM II/ III PROCESSORS...
PCI Bus Quick Reference by Doug Abbott
PCI Bus Quick Reference by Doug Abbott This quick reference to the PCI Bus is based on the information contained in PCI BUS DEMYSTIFIED by Doug Abbott, published by LLH Technology Publishing. To order
PRELIMINARY IDT7M9510 IDT7M9514
79RV60/79RC6V7 PCI MEZZANINE CARD PRELIMINARY 7M9510 7M951 FEATURES: PCI Mezzanine Card (PMC) (IEEE 1386) form factor 7M9510 High performance 79RV60 MIPS Processor 100Mhz, 150Mhz, 0Mhz, 00MHz CPU speeds
TABLE OF CONTENTS 1. INTRODUCTION 2. SPECIFICATION 3. HARDWARE INSTALLATION 6BXDS 1.1. PREFACE KEY FEATURES...1-1
6BXDS 1. INTRODUCTION TABLE OF CONTENTS 1.1. PREFACE...1-1 1.2. KEY FEATURES...1-1 1.3. PERFORMANCE LIST...1-2 1.4. BLOCK DIAGRAM...1-3 1.5. INTRODUCE THE Pentium II Processor...1-4 1.6. What is AGP?...1-6
User Guide for the Pericom PI7C8150 Reference board By Glenn Sanders
2789027890278902278902789027890227890278902789022789027890278902278902 Introduction The Pericom PI7C80 PCI-to-PCI bridge evaluation board demonstrates the bridge and allows testing of key features either
ROBO-8710VLA. User's Manual
ROBO-8710VLA Single Board Computer User's Manual P/N: B8980710 Version 1.4 Copyright Portwell, Inc., 2004. All rights reserved. All other brand names are registered trademarks of their respective owners.