pickeringtest.com B Microwave Multiplexer Module

Transcription

1 0-78B Microwave Multiplexer Module Single or Dual Channel Panel Mounted Multiplexer Up To 3 Remote Multiplexers From Single Slot Version 18GHz, 2.GHz and 0GHz Versions 0 Ohm Terminated and Unterminated Versions 7Ω Version With 2.GHz LED Indication VISA, IVI & Kernel Drivers Supplied for Windows XP/Vista/7/8 Supported by PXI or LXI Chassis 3 Year Warranty Pickering Interfaces PXI Microwave multiplexer modules are suitable for switching 0Ω signals up to 0GHz. The 0-78B is available as a single or dual channel multiplexer, with relays mounted on the front panel. The single slot version can support up to three supplied remotely mounted multiplexers. The single slot remote multiplexer versions occupy less PXI panel space and allow the microwave relays to be placed closer to the UUT and other RF test equipment. In some applications it can shorten the length of RF cable runs and improve system performance. The remote multiplexers are supplied complete with a 1.m interface cable. A 0Ω terminated version with panel mounted multiplexers is also available that occupies or (for the dual version) slots. A 7Ω version is now available with a bandwidth of 2.GHz, using the Siemens 1./. style 7Ω connector. The 0-78B is suitable for constructing complex microwave switching networks and provides a range of switching configurations to suit most applications. connection is by high performance SMA and SMA-2.9 connectors for 0 Ohm versions Single slot version controls 1, 2 or 3 remotely mounted microwave multiplexers via interface cables Com Model 0-78B-22 Features 2 Separate Non Terminated Channel Microwave Multiplexers (model 0-78A-21 has 1 multiplexer bank) Default State Shown MUX Bank COM Com MUX Bank 1 off MUX Bank 2 off Model 0-78B-21-T Features a single Terminated Channel Microwave Multiplexer (model 0-78A-22-T has 2 multiplexer banks) Default State Shown These modules offer high RF & Microwave performance with applications mainly in the Microwave region, however there are many uses in the RF spectrum where extremely low insertion loss and ultra-high isolation are critical ISSUE 1.1 OCT 201

2 Specification General Multiplexer Information Relay Manufacturer: Configuration: LED Indicators: Operate Time: Maximum Cold Switch Voltage: Maximum Carry Current: Radiall SPT Microwave Multiplexer with 1, 2 or 3 independent banks. Multiplexers have blue LEDs to indicate a closed RF path. Typically 1ms 100V 1A Multiplexer Specification - 18GHz Versions Connectors: 0Ω SMA DC to 18GHz 80dB (0-3GHz) 70dB (3-8GHz) 0dB (8-12.GHz) 0dB (12.-18GHz) 0.2dB (0-3GHz) 0.3dB (3-8GHz) 0.dB (8-12.GHz) 0.dB (12.-18GHz) 1.2:1 (0-3GHz) 1.3:1 (3-8GHz) 1.:1 (8-12.GHz) 1.:1 (12.-18GHz) 20W (0-3GHz) 10W (3-8GHz) 120W (8-12.GHz) 100W (12.-18GHz) Typical Insertion Loss (db) Plot for 18GHz Versions Typical Isolation (db) Plot for 18GHz Versions Typical VSWR Plot for 18GHz Versions Termination Power Rating: Expected Life (Low Power) 1W per termination, 3W total per channel multiplexer. 18GHz option > million operations 18GHz terminated option >2 million operations Typical Isolation (db) Plot for Terminated 18GHz Versions Typical Insertion Loss (db) Plot for Terminated 18GHz Versions Typical VSWR Plot for Terminated 18GHz Versions

3 Multiplexer Specification - 2.GHz Connectors: Termination power rating: Expected Life (low power): 0Ω SMA DC to 2.GHz 80dB (0-3GHz) 70dB (3-8GHz) 0dB (8-12.GHz) 0dB (12.-18GHz) db (18-2.GHz) 0.2dB (0-3GHz) 0.3dB (3-8GHz) 0.dB (8-12.GHz) 0.dB (12.-18GHz) 0.7dB (18-2.GHz 1.2:1 (0-3GHz) 1.3:1 (3-8GHz) 1.:1 (8-12.GHz) 1.:1 (12.-18GHz) 1.7:1(18-2.GHz) 20W (0-3GHz) 10W (3-8GHz) 120W (8-12.GHz) 100W (12.-18GHz) 0W (18-2.GHz) 1W per termination, 3W total per channel multiplexer >2 million ops per position Multiplexer Specification - 2.GHz Unterminated Versions Connectors: Expected Life (low power): 0Ω SMA-2.9 DC to 2.GHz 70dB (0-GHz) 0dB (-12.GHz) 0dB (12.-18GHz) db (18-2.GHz) 0.2dB (0-GHz) 0.dB (-12.GHz) 0.dB (12.-18GHz) 0.7dB (18-2.GHz 1.2:1 (0-GHz) 1.:1 (-12.GHz) 1.:1 (12.-18GHz) 1.7:1(18-2.GHz) 0W (0-GHz) 30W (-12.GHz) 2W (12.-18GHz) 1W (18-2.GHz) >2 million ops per position Typical Isolation (db) Plot for 2.GHz Versions Typical VSWR Plot for 2.GHz Versions Typical Insertion (db) Loss Plot for 2.GHz Typical Isolation (db) Plot for 2.GHz Typical Insertion Loss (db) Plot for 2.GHz Versions Typical VSWR Plot for 2.GHz

4 Multiplexer Specification - 0GHz Versions Connectors: Termination power rating: Expected Life (Low Power): 0Ω SMA-2.9 DC to 0GHz 70dB (0-GHz) 0dB (-12.GHz) 0dB (12.-18GHz) db (18-2.GHz) 0dB (2.-0GHz) 0.2dB (0-GHz) 0.dB (-12.GHz) 0.dB (12.-18GHz) 0.7dB (18-2.GHz) 1.1dB (2.-0GHz) 1.3:1 (0-GHz) 1.:1 (-12.GHz) 1.:1 (12.-18GHz) 1.7:1(18-2.GHz) 2.2:1 (2.-0GHz 0W (0-GHz) 30W (-12.GHz) 2W (12.-18GHz) 1W (18-2.GHz) W (2.-0GHz) 1W per termination, 3W total per channel multiplexer >2 million operations per position Typical VSWR Plot for 0GHz Versions Typical Insertion (db) Loss Plot for 0GHz Typical Insertion Loss (db) Plot for 0GHz Versions Typical Isolation (db) Plot for 0GHz Typical Isolation (db) Plot for 0GHz Versions Typical VSWR Plot for 0GHz

5 Mux Specification - 2.GHz 7 Ohms unterminated version 7Ω Connectors: 1./. Expected Life (Low Power): DC to 2.GHz 80dB (0-1GHz) 70dB (1-2.GHz) 0.2dB (0-1GHz) 0.3dB (1-2.GHz) 1.2:1 (0-1GHz) 1.3:1 (1-2.GHz) 00W (0-1GHz) 20W (1-2.GHz) >2 million operations per position Interconnection between the 0-78B single slot version and the remotely mounted microwave multiplexers 3 off Interface Cables 1.m Length 0-78B Single Slot Version MUX BANK 1 MUX BANK 2 MUX BANK 3 pickering Remotely Mounted Microwave Multiplexers Typical Insertion Loss (db) Plot for 2.GHz 7Ω Versions Remote Mount Microwave Multiplexer 0-78B-1-E Typical Isolation (db) Plot for 2.GHz 7Ω Versions Power Requirements Power consumption from the backplane supply is as follows: +3.3V +V +12V -12V 0 0.2A 0.7A 0 Mechanical Characteristics Front panel mounted versions occupy 3 slots, terminated front panel mounted versions occupy (single) or (dual versions) slots. Remote multiplexer versions occupy one slot and are supplied with a 1.m interface cable for each of the supplied microwave relays. 3D models for all versions in a variety of popular file formats are available on request. Typical VSWR Plot for 2.GHz 7Ω Versions Connectors PXI bus via 32-bit P1/J1 backplane connector. Connectors on microwave switches are coaxial as follows: 18GHz versions - SMA 2.GHz versions - SMA or SMA-2.9 0GHz versions - SMA-2.9 7Ω versions - Siemens 1./. 7Ω connectors

6 Product Order Codes 18GHz Multiplexer Versions - 0Ω Single Chan, Panel mount, 0Ω SMA Dual Chan, Panel mount, 0Ω SMA Single Chan, Panel mt, 0Ω SMA, Term. Dual Chan, Panel mt, 0Ω SMA, Term Single Chan, Remote mount, 0Ω SMA Dual Chan, Remote mount, 0Ω SMA Triple Chan, Remote mount, 0Ω SMA Single Chan, Remote, 0Ω SMA, Term. Dual Chan, Remote, 0Ω SMA, Term Triple Chan, Remote, 0Ω SMA, Term 2.GHz Multiplexer Versions - 0Ω Single Chan, Panel mount, 0Ω SMA-2.9 Dual Chan, Panel mount, 0Ω SMA-2.9 Single Chan, Panel mt, 0Ω SMA, Term. Dual Chan, Panel mt, 0Ω SMA, Term Single Chan, Remote mount, 0Ω SMA-2.9 Dual Chan, Remote mount, 0Ω SMA-2.9 Triple Chan, Remote mount, 0Ω SMA-2.9 Single Chan, Remote, 0Ω SMA, Term. Dual Chan, Remote, 0Ω SMA, Term Triple Chan, Remote, 0Ω SMA, Term 0GHz Multiplexer Versions - 0Ω Single Chan, Panel mount, 0Ω SMA-2.9 Dual Chan, Panel mount, 0Ω SMA-2.9 Single Chan, Panel mt, 0Ω SMA-2.9, Term Dual Chan, Panel mt, 0Ω SMA-2.9, Term Single Chan, Remote mount, 0Ω SMA-2.9 Dual Chan, Remote mount, 0Ω SMA-2.9 Triple Chan, Remote mount, 0Ω SMA-2.9 Single Chan, Remote, 0Ω SMA-2.9, Term Dual Chan, Remote, 0Ω SMA-2.9, Term Triple Chan, Remote, 0Ω SMA-2.9, Term 2.GHz Multiplexer Versions - 7Ω Single Chan, Panel mount, 7Ω 1./. Dual Chan, Panel mount, 7Ω 1./. Single Chan, Remote mount, 7Ω 1./. Dual Chan, Remote mount, 7Ω 1./. Triple Chan, Remote mount, 7Ω 1./. 0-78B B B-21-T 0-78B-22-T 0-78B-21-E 0-78B-22-E 0-78B-23-E 0-78B-21-TE 0-78B-22-TE 0-78B-23-TE 0-78B B B-31-T 0-78B-32-T 0-78B-31-E 0-78B-32-E 0-78B-33-E 0-78B-31-TE 0-78B-32-TE 0-78B-33-TE 0-78B B B-1-T 0-78B-2-T 0-78B-1-E 0-78B-2-E 0-78B-3-E 0-78B-1-TE 0-78B-2-TE 0-78B-3-TE 0-78B B B-71-E 0-78B-72-E 0-78B-73-E Accessories: Microwave relay bracket for remote mounting - Contact Pickering Interfaces for information. These models have equivalents in the 0-78A range that occupy only two PXI slots. These models have been superceded with more competitive options from model 0-78A, however remain available for legacy requirements. Mating Connectors & Cabling For connection accessories for the 0-78B range please refer to the D RF Cable Assemblies data sheets where a complete list and documentation can be found for accessories, or refer to the Connection Solutions catalog.

7 Programming Pickering provide kernel, IVI and VISA (NI and Agilent) drivers which are compatible with 32/-bit versions of Windows including XP, Vista, 7 and 8 operating systems. The VISA driver is also compatible with Real-Time Operating Systems such as LabVIEW RT. For other RTOS support contact Pickering. These drivers may be used with a variety of programming environments and applications including: National Instruments products (LabVIEW, LabWindows/ CVI, Switch Executive, MAX, TestStand, etc.) Microsoft Visual Studio products (Visual Basic, Visual C+) Agilent VEE Mathworks Matlab Marvin ATE Easy MTQ Testsolutions Tecap Drivers for popular Linux distributions are available, other environments are also supported, please contact Pickering with specific enquiries. PXI & CompactPCI Compliance The module is compliant with the PXI Specification 2.2. Local Bus, Trigger Bus and Star Trigger are not implemented. Uses 33MHz 32-bit backplane interface. Safety & CE Compliance All modules are fully CE compliant and meet applicable EU directives: Low-voltage safety EN1010-1:2001, EMC Immunity EN :2001, Emissions EN011:1998. PXI & LXI Chassis Compatibility Compatible with all chassis conforming to the 3U PXI and 3U cpci specification. Compatible with Legacy and Hybrid peripheral slots in a 3U PXI Express chassis. Compatible with Pickering Interfaces LXI Modular Chassis. For information on driving your switching solution in an LXI environment refer to the LXI Product Catalog. Operating/Storage Conditions Operating Conditions Operating Temperature: Humidity: Altitude: 0 C to + C Up to 90% non-condensing 000m Storage and Transport Conditions Storage Temperature: -20 C to +7 C Up to 90% non-condensing Humidity: Altitude: 1000m Please refer to the 200 page Pickering Interfaces Connection Solutions catalog for the full list of connector/cabling options, including drawings, photos and specifications. Available in either print or as a download. Alternatively our web site has dynamically linked connector/ cabling options, including pricing, for all Pickering PXI modules. Latest Details Please refer to our Web Site for Latest Product Details. www. The Big PXI Catalog gives full details of Pickering s entire range of PXI switch modules, instrument modules and support products. At over 00 pages, the Big PXI Catalog is available on request or can be downloaded from the Pickering website. The Cables & Connectors Map - outlines the cable and connector options available for all PXI Modules. Ever wondered what PXI is all about? Pickering Interfaces PXImate explains the basics of PXI and provides useful data for engineers working on switch based test systems. The PXImate is available free on request from the Pickering website. The PXI Module Map - a simple foldout selection guide to all Pickering s 00+ PXI Modules.

8 Copyright (201) Pickering Interfaces. All Rights Reserved Pickering Interfaces maintains a commitment to continuous product development, consequently we reserve the right to vary from the description given in this data sheet.