Illustrated Parts List TACO BELL I-LINE COUNTER. Duke Manufacturing Co.

Transcription

1 Illustrated Parts List TACO BELL I-LINE COUNTER This manual is Copyright 2010 Duke Manufacturing Co. All rights reserved. Reproduction without written permission is prohibited. Duke is a registered trademark of the Duke Manufacturing Co. Duke Manufacturing Co N. Broadway St. Louis, MO Fax: P/N C

2 TABLE OF CONTENTS DETERMINING THE MANUFACTURING DATE FROM A PIECE OF EQUIPMENT S SERIAL NUMBER... 3 TRI-CHANNEL COLD PAN PARTS LIST... 4 Table: PL-1 Tri-Channel Cold Pan... 4 Figure: PL-1 Tri-Channel Cold Pan... 5 REFRIGERATED BASE UNIT PARTS LIST... 6 Table: PL-2 Refrigerated Base Unit... 6 Figure: PL-2 Refrigerated Base Unit... 7 DRY CHANNEL WARMER PARTS LIST... 8 Table: PL-3 Dry Channel Warmer... 8 Figure: PL-3 Dry Channel Warmer... 9 DRY CHANNEL RELAY BOX ASSEMBLY Table: PL-4 Dry Relay Box Assembly Figure: PL-4 Dry Relay Box Assembly...11 DRY CHANNEL RELAY BOX ASSEMBLY REV Table: PL-5 Dry Relay Box Assembly Rev Figure: PL-5 Dry Relay Box Assembly Rev DRY CHANNEL CONTROL BOARD Figure PL-6 Dry Channel Control Board Figure PL-7 Dry Channel Control Board Version I-LINE EXTENSION TABLE Table: PL-8 I-Line Extension Table Figure: PL-8 I-Line Extension Table

3 DETERMINING THE MANUFACTURING DATE FROM A PIECE OF EQUIPMENT S SERIAL NUMBER Units Manufactured in St. Louis Serial Number Example: 30JDJF JD JF 0001 Specifies the Specifies the Specifies the Sequential type of unit year manufactured - month manufactured - digits see code below. see code below. Code Interpretation for units manufactured in St. Louis. A = 1 B = 2 C = 3 D = 4 E = 5 F = 6 G = 7 H = 8 I = 9 J = 0 The serial number 30JDJF0001 indicates that the unit was built in 2004 (JD = 04) in the month of June (JF = 06). Units Manufactured in Sedalia Serial Number Example: Specifies the Specifies the Sequential month manufactured year manufactured digits The serial number indicates that the unit was built in January of

4 TRI-CHANNEL COLD PAN PARTS LIST ITEM # QTY. PART NUMBER DESCRIPTION Condensing Unit, TXV, 1/3 HP 120VAC, 60Hz Switch, Toggle, Red, 30 amp 2a Griddle Switch, GTO Retrofit Tri-Channel Control, Temperature Thermostat, Elreha Digital Display Door, Load Center Motor, Electric Fan, 120VAC Fan Bracket Fan Blade APW Tortilla Griddle Griddle Bracket Pronto Bottle Holder #C Taco Rail Assembly Not shown Switch, Tri-Channel Main Power Not shown Valve, Auto Exp. I-Line TB (Not Shown) Not shown Filter, 9.375" X 9.875" (Not Shown) Not shown Dryer Not shown TXV Valve, 54PSI, Adjustable Not shown Lift-Off Louvered Panel Not shown A/R Position Stud, Carving Board, SS Not shown Switch, Toggle, 30A, Red Not shown Panel, Grill Switch Not shown Guard, Toggle Switch Not shown Filter, 9.375" x 9.875" x.3125" Table: PL-1 Tri-Channel Cold Pan 4

5 TRI CHANNEL Illustrated Parts Lists for Taco Bell I-Line Counter TRI-CHANNEL COLD PAN a Figure: PL-1 Tri-Channel Cold Pan 5

6 REFRIGERATED BASE UNIT PARTS LIST ITEM # QTY. PART NUMBER DESCRIPTION Door, Insulated, 19" RT Refrigerated Cabinet Door, Insulated, 17" RT Refrigerated Cabinet Door, Insulated, 17" LT Refrigerated Cabinet Door, Insulated, 19" LT Refrigerated Cabinet Gasket, Door, 17" Gasket, Door, 19" Hinge, Base Hinge, Door, Back Counter Plate, Control Access Filter, 9.375" x 9.875" x.3125" Refrigerated Base Control, Temperature, #A Condensing Unit. 1/5 HP R-134A, 120V, 60 Hz Leg Assembly, Galvanized, 1-5/8" x 6" Plate Mount Leg Assembly, Stainless Steel, 1-5/8" x Panel, Fold Down LR Panel, Fold Down LR Assembly, Shelf Pilaster Pilaster Mount Filler Wire Rack, 17" Opening, SS Wire Rack, 19" Opening, SS Plate, Evaporator Cover Thumb Screws, Evaporator Cover X 5/ Shelf, Clip Display, Temperature Not shown Support, Pin Not shown Box, Electrical, 4 Switch Not Shown Cap, Tube,.042" ID X.093" OD (Order by qty, 10 ft) Table: PL-2 Refrigerated Base Unit 6

7 REFRIGERATED BASE UNIT F 38 F Figure: PL-2 Refrigerated Base Unit 7

8 DRY CHANNEL WARMER PARTS LIST ITEM # QTY. PART NUMBER DESCRIPTION Tub Assembly, Dry Channel HDC Frame Assembly, Channel Top HDC Kit, Channel HDC 3/ Switch, Toggle, Red, 30A Assembly, Relay Box with Switch Not shown Ground Bar, REV 5.1 Not shown Ground Wire Cable Not shown Label, Front of Unit Not shown Label, Back of Unit Not shown Retrofit Toggle Switch Kit Not Shown Kit, Element Replacement Not Shown Kit, RTD Replacement Not Shown Kit, Hi-limit Replacement Not Shown Kit, Channel Gasket, Single Zone Table: PL-3 Dry Channel Warmer 8

9 CHANNEL TOWER TORTILLA CHANNEL Illustrated Parts Lists for Taco Bell I-Line Counter DRY CHANNEL WARMER PARTS LIST O ON OFF TRI TACO GRILL DRY PROG 4 5 Figure: PL-3 Dry Channel Warmer 9

10 DRY CHANNEL RELAY BOX ASSEMBLY ITEM # QTY. PART NUMBER DESCRIPTION Box, Relay with Switch Plate, Relay Mounting Relay, Mini No 20A-240V-24V Label, Relay Box Screw 8 X 1/2" TEK PHIL Switch, Lighted, DPST 125V Transformer, 208/240V Pri, 24V Sec Stud PEM 8-32 X 1/2" SS Nut Hex 8-32 HZ-T KEPS Cable, Assembly Heater Wiring, 3-CHN Nutsert, ALM Terminal Block Top, Relay Box Wiring Diagram Label, Relays X 1/2" RD HD PHIL SS Screw, Connector Harness, DSUB Relay Angle, Mounting Bracket, Left Angle, Mounting Bracket, Right Not Shown Harness, Terminal Block Not Shown Kit, Dry Channel retrofit Table: PL-4 Dry Relay Box Assembly 10

11 DRY CHANNEL RELAY BOX ASSEMBLY DANGER Figure: PL-4 Dry Relay Box Assembly 11

12 DRY CHANNEL RELAY BOX ASSEMBLY REV 5.1 ITEM # QTY. PART NUMBER DESCRIPTION Box, Relay with Switch Plate, Relay Mounting Relay, Mini No 20A-240V-24V Terminal Block Transformer, 208/240V Pri, 24V Sec Angle, Mounting Bracket, Left Angle, Mounting Bracket, Right Stud, PEM, 8-32 X 1/2", SS Terminal Block Top, Relay Box Bushing, HEYCO Harness, Dry Channel, RTD's Harness, Dry Channel, Relays Pop Rivet, 5/32 X 1/8 SS Screw, 8-32 X 1/2" PAN PHIL Nut, Hex, 8-32 HZ-T KEPS Screw, 8 X 1/2" TEK PHIL Screw, 4-40 X 1/2" FPPH Switch, Toggle, NKK, 25 Amp Plate, ON OFF, 12MM Conduit, Assembly, Power Supply Relay Box, Hardwired Wiring Diagram Table: PL-5 Dry Relay Box Assembly Rev

13 DRY CHANNEL RELAY BOX ASSEMBLY REV Figure: PL-5 Dry Relay Box Assembly Rev

14 DRY CHANNEL CONTROL BOARD DRY CHANNEL TEMPERATURE Figure: PL-6 Dry Channel Control Board PART NO. DESCRIPTION HDC HDC4-44 HDC Assembly, Display Control Board Figure: PL-7 Dry Channel Control Board Version 4 PART NO. DESCRIPTION HDC HDC4-44 HDC Assembly, Dual Zone, Display Control Board Ver 4 (04/2007) Assembly, Single Zone, Display Control Board Ver 4 (04/2007)

15 I-LINE EXTENSION TABLE ITEM # QTY. PART NUMBER DESCRIPTION Wrapper Shelf Divider, RT Wrapper Shelf, LT 2 1 TB Wrapper Shelf, RL J-Hook, Small Pan Scale, S/S Table: PL-8 I-Line Extension Table Figure: PL-8 I-Line Extension Table 15

16 Duke Manufacturing Co N. Broadway St. Louis, MO Fax: P/N C