3M 4-Wall, Tripolarized Header.050".100" Latch/Ejector, PTH & SMT Straight, PTH Right Angle 810 Series
|
|
- Darleen Goodwin
- 5 years ago
- Views:
Transcription
1 Tripolarized for robust alignment when mating to 820 series socket 50 mil 100 mil halves the connector length vs. traditional 100 mil x 100 mil products Latching Ejector for rugged high performance applications Available for through hole or surfacemount attachment High temperature plastic for lead free surfacemount or Paste-in-Hole soldering methods Four-wall shroud provides contact protection s: 20, 26, 6, 40, 50, 60, 68, 80 and 100 See the Regulatory Information Appendix (RIA) in the RoHS compliance section of com for compliance information Date Modifi ed: January 11, 2011 Sheet 1 of 7 Physical Electrical Insulation: Material: High Temperature Plastic (LCP) Flammability: UL 94V-0 Color: Black (RB Plating only) or Natural : Material: Copper Alloy Plating: Underplating: 100 µ" [2.54 mm] Nickel Wiping Area: 0 µ" [0.76 mm] Gold Solder Tails: Matte Tin or Tin Lead (See Ordering Information) Marking: M Logo, Part Number and Orientation Triangle Mating Compatibility: 820 Series (TS-0254) Current Rating:.00 A, 1 Powered 2.00 A, 4 s Powered 0.75 A, All s powered Rating Conditions: EIA Method 2, 0 degrees C maximum temperature rise, 20% derated. Reference appropriate M Product Specification for detailed current derating curves. Environmental Insulation Resistance: > Ω at 500 V DC Withstanding Voltage: 500 V RMS at Sea Level Temperature Rating: -55 C to +105 C Process Rating: Maximum 260 C (Profile per J-STD-020C) Moisture Sensitivity Level: 1 (per J-STD-020C) UL File No.: E68080
2 C Inch [Imm] Tolerance Unless Noted Inch ±.1 ±.01 ±.005 [ ] for Reference Only Quantity 020 Table 1 A B C [26.92] [18.4] [12.70] D Short (Ref.) [42.44] D Long (Ref.) [46.79] [0.7] [22.15] [16.51] [46.25] [50.60] 2X.092 [2.4] A B C.015 X.015 [0.8] X [0.8] Position 2 See Note [7.08] [9.62] [45.97] [52.2] [57.40] [28.50] [1.04] [7.9] [4.74] [48.82] [22.86] [25.40] [1.75] [8.10] [4.18] [52.60] [55.14] [61.49] [67.84] [72.92] [56.95] 2.42 [59.49] [65.84] [72.19].042 [77.27] [65.02] [56.44] [50.80].171 [80.54].42 [84.89].10 [7.87].015 X.015 [0.8] X [0.8].050 Typ.100 Ref [77.72] [69.14] [6.50].671 [9.24] Table 2 PCB Thickness "F" Solder Tail Length ± [97.59].062 [1.57].090 [2.29].094 [2.9].112 [2.84].125 [.18].14 [.6] D Long Latch.620 Ref [ ] Short Latch.165 ±.010 [ 4.19 ].440 ±.010 [11.18] Orientation Triangle Notes: 1. This polarization bump does not exist on the 20 position header. 2. Recommended to be mated to the.050" X.100" Wiremount Socket 820 Series..828 Ref [ 21.0 ].405 [10.29].265 [6.7].140 ±.010 [.56].015 [0.8] F (See Table 2) 2X Ø.116 [2.95].105 [2.67].160 Ref [4.06].06 Ref [7.77] Ordering Information Ejector Latches (If Ordered Separately) Long Latches (natural) B (black) Short Latches (natural) B (black) Quantity (See Table 1) Ejector/Latch System: 0 = None (Special Order) 5 = With Short Ejectors Installed (Special Order) 6 = With Long Ejector Latches Installed (Standard) PTH Right Angle Header 81XXX - 5X0X0 - XX Plating suffix: blank = 125 µ" tin lead tails (RIA E & C2 apply) RB = 250 µ" matte tin tails (RIA E1 & C1 apply) Tail: 2 = Solder Tail for.062 [ 1.57 ] PC Board (Standard) = Solder Tail for.094 [ 2.9 ] PC Board (Special Order) 4 = Solder Tail for.125 [.18 ] PC Board (Special Order) Sheet 2 of 7
3 Ø.024 ±.00 Typ.050 ±.002 *Solder Thief Solder Pads (See Note 2) Table Ejector Latches Dimension E Min None.575 [14.61] Long [25.65] Short.885 [22.48] [0.89] [1.14] - [1.52] *Solder Thief Solder Pads required only on Solder side of PC Board. View A E C ± ± ±.002 Typ Tolerance Noncumulative.55 Max [9.02] Position 2.05 Min [7.75] Flow Solder Direction View A 2X Ø.109 ±.002 [2.77] Ø.024 ±.00 Typ Recommended Mounting Hole Pattern PTH Right Angle Header (shown for mounting side of PC Baord).160 ±.002 [4.06] Notes: 1. Recommended to process PC Boards through the solder bath such that the connector enters end first (two solder tails at a time). This will help prevent solder bridging. 2. A Dummy or Solder Thief Solder Pad at the end of each row is recommended on the bottom or solder side of the PC Board in order to help prevent solder bridging on the end solder tails. The solder thiefs are only required on the end of the rows which leave the solder bath last.. In order to facilitate soldering it is recommended that ejector latches be installed after the soldering process. Sheet of 7
4 Quantity Table 1 A B C Short (Ref.) C Long (Ref.) D [26.92] [18.4] [42.44] [46.79] [21.84] [0.7] [22.15] [46.25] [50.60] [25.65] [7.08] [28.50] [52.60] [56.95] [2.00] [9.62] [1.04] [55.14] 2.42 [59.49] 1.60 [4.54] [45.97] [7.9] [61.49] [65.84] [40.89] [52.2] [4.74] [67.84] [72.19] [47.24] [57.40] [48.82] [72.92].042 [77.27] [52.2] [65.02] [56.44].171 [80.54].42 [84.89] 2.60 [59.94] [77.72] [69.14].671 [9.24].842 [97.59] [72.64] C A Table 5 PCB Thickness "F" Solder Tail Length ± [7.87] Position 2 B See Note [1.57].092 [2.4].094 [2.9].110 [2.79].015 X.015 [ 0.8 ] X [ 0.8 ].050 Typ.100 Ref.05 Ref Mating Point.265 [6.7].140 ±.010 F (See Table 2) ± ± Ref Ref X XØ.116 2,95 Orientation Triangle D.015 X.015 [0.8 X 0.8] Optional Press fit post mount alignment feature Notes: 1. This polarization bump does not exist on the 20 position header. 2. Recommended to be mated to the.050" x.100" 820 Series Socket. Ordering Information Ejector Latches (If Ordered Separately) Long Latches (natural) B (black) Short Latches (natural) B (black) Quantity (See Table 4) Ejector/Latch System: 0 = None (Special Order) 5 = With Short Ejectors Installed (Special Order) 6 = With Long Ejector Latches Installed (Standard) PTH Straight Header 81XXX - 6X0X0X - XX Plating suffix: blank = 125 µ" tin lead tails (RIA E & C2 apply) RB = 250 µ" matte tin tails (RIA E1 & C1 apply) Board Mounting Options: 1 = None (Special Order) = Press fit posts both ends (Standard) Tail: 2 = Solder Tail for.062 [ 1.57 ] PC Board (Standard) = Solder Tail for.094 [ 2.9 ] PC Board (Special Order) 4 = Solder Tail for.125 [.18 ] PC Board (Special Order) Sheet 4 of 7
5 .025 ± [0.89].050 ± [1.14] - [1.52] *Solder Thief Solder Pads (See Note2) Table 6 Ejector/Latches Dimension E (Min) None.215 [5.46] Long.650 [16.51] Short.525 [1.4] *Solder Thief Solder Pads required only on Solder side of PC Board. View A E 2X.205 ±.00 [5.21] D ± ±.002 Typ Tolerance Noncumulative Flow Solder Direction.160 Min [4.06].050 ±.00 VIEW A View A.225 Min [5.72] 2X.109 ±.002 [2.77].025 ±.00 Typ Recommended Mounting Hole Pattern PTH Vertical Header (shown for mounting side of PC Board) Note: 1. Recommended to process PC Boards through the solder bath such that the connector enters end first (two solder tails at a time). This will help prevent solder bridging. 2. A Solder Thief Solder Pad (Dummy Pad) at the end of each row is recommended on the bottom or solder side of the PC Board in order to help prevent solder bridging on the end solder tails. The Solder Thiefs are only required on the end of the rows which leave the solder bath last. Inch [Imm] Tolerance Unless Noted Inch ±.1 ±.01 ±.005 [ ] for Reference Only Sheet 5 of 7
6 Table 7 C Quantity A B D Short (Ref.) D Long (Ref.) Tape & Reel Suffix [26.92] [18.4] [42.44] [46.79] WD [0.7] [22.15] [46.25] [50.60] [7.08] [28.50] [52.60] [56.95] WF [9.62] [1.04] [55.14] 2.42 [59.49] [45.97] [52.2] [7.9] [4.74] [61.49] [67.84] [65.84] [72.19] WF [57.40] [65.02] [48.82] [56.44] [72.92].171* [80.54].042* [77.27].42* [84.89] WG [77.72] [69.14].671 [9.24].842 [97.59] WH *Requires WH pocket tape Short Latch Orientation Triangle D Long Latch.165 ±.010 [4.19].440 ±.010 [11.18].828 Ref [21.0].10 ±.010 [.0].620 Ref [15.75].015 [0.8].405 [10.29].05 Ref Mating Point.265 [6.7].092 [2.4] Optional Single Press Fit Post Mount/Alignment Feature.116 [2.95] Optional Metal Clip Retention.080 [2.0].46 ±.010 [8.79] Inch [Imm] Tolerance Unless Noted Notes: 1. This polarization bump does not exist on the 20 position header. 2. Recommended to be mated to the.050" X.100" 820 Series Wiremount Socket Inch ±.1 ±.01 ±.005 [ ] for Reference Only Ordering Information Quantity (See Table 7) Ejector/Latch System: 0 = None (Special Order) 5 = With Short Ejectors Installed (Special Order) 6 = With Long Ejector Latches Installed (Standard) SMT Straight Header 81XXX - 6X0C0X - XX - XX Board Mounting Options: 1 = None 4 = Press Fit Post Mount at end 7 = Metal retention clips 8 = #1 end press fit post & metal retention clips (Special Order) Packaging Options: Blank = Trays WX = Tape & Reel Package (see table) Plating suffix: blank = 125 µ" tin lead tails (RIA E & C2 apply) RB = 250 µ" matte tin tails (RIA E1 & C1 apply) Ejector Latches (If Ordered Separately) Long Latches (natural) B (black) Short Latches (natural) B (black) Sheet 6 of 7
7 .065 ±.002 Typ [1.65] Ejector Latches H Min None.775 [19.69] Long [27.56] Short 1.21 [0.7].042 ±.00 Typ (Plated thru hole) [1.07] Typ, Full R Detail A Optional plated thru hole for metal clip retention No. of Positions F G [11.4] N/A [15.24] [21.59] N/A [24.1] N/A [0.48].025 [.64] [6.8] [41.91] [49.5] [62.2] CL Optional Drilled Hole for Plastic Post.109 ±.002 [2.77].158 ±.002 [4.01] See Detail A Position 2 CL F.050 ±.002 Typ Tolerance Noncumulative.029 ±.001 [0.74] CL G 2X.075 ±.002 [1.905].220 ±.00 [5.59].76 [9.55].110 ±.002 [2.79] H CL.280 [7.11].205 ±.00 [5.21] Recommended Mounting Hole Pattern, SMT Straight Header (Shown for mounting side of PC Board) Sheet 7 of 7
8 Important Notice All statements, technical information, and recommendations related to M s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in M s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of ninety (90) days from the time of purchase. M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at M s option, to replace or repair the M product or refund the purchase price of the M product. Except where prohibited by law, M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this M product, regardless of the legal theory asserted. M Electronics Solutions Division 6801 River Place Blvd. Austin, TX U.S.A Please recycle. Printed in USA. M All rights reserved. RIA-2217B-E
3M Serial Advanced Technology Attachment (SATA) Connector Signal Plug, Boardmount, Surface Mount Right Angle and PTH Vertical
7-position supports motherboard signal requirements EMLB contacts for hot swap Blind mate polarization for easy cable attach Through-hole and surface mount options PCB retention clip aids manufacturing
More information3M Boardmount Socket 2 mm x 2 mm Straight Surface Mount, Straight and Right Angle Plated Through-Hole 1502 Series
M Boardmount Socket High Temperature Insulator Reflow Solder ompatible Low height helps minimize PB stack height End Stackable Thru-hole versions are side stackable SMT parts are available in tape and
More information3M Pak 100 Wiremount Plug Series
Pak 100 Wiremount Plug Shrouded to protect against physical and chemical pin damage Open or closed end covers available Optional ejector latches Accepts flat cable or discrete wire Military (with 3518
More information3M Mini-Clamp Socket 2 mm Boardmount, Straight Solder Tails 372 Series
2 mm Boardmount, Straight Solder Tails 72 Series Compact design saves board space High number of mating cycles Mating latch features provide a reliable interconnection in demanding applications Enables
More information3M I/O Connector Mounting Options and Hardware
M I/O Connector Mounting Options and Hardware Hardware Guide Date Modified: July 20, 2009 Part Number Type Mounting Hardware Applications - Table 1 Mini D Ribbon (MDR) Conn. s D Sub Conn. s D Ribbon Conn.
More information3M Ribbon Cable Socket and Header, Series 451 & " x.050" (1.27 mm x 1.27 mm)
1 of 8 3M Ribbon Cable Socket and Header, Series 451 & 452.050" x.050" (1.27 mm x 1.27 mm) Product Specification: 78-5102-0091-4 Revised: 05-01-2013 2 of 8 Page Cover Page..... 1 Contents 2 1. Scope......
More information3M (TM) Ribbon Cable Socket and Header, 451 and 452 Series.050" x.050" (1.27 mm x 1.27 mm)
3M (TM) Ribbon Cable Socket and Header, 451 and 45 Series.050" x.050" (1.7 mm x 1.7 mm) Product Specification: 78-510-0091-4 Revised: 1-6-016 78-510-0091-4 Rev D of 9 Page Cover Page..... 1 Contents 1.
More information3M Textool BGA Test & Burn-In Sockets 1.00 mm, Types 0, I, II and III Open Top
Textool BGA Test & Burn-In Sockets 1.00 mm, Types 0, I, II and III Open Top Double-beam normally-closed contact delivers balanced, opposing forces to solder ball with minimal shear stress Contact tips
More informationGeneral Process Specification for Reflow Soldering of Boardmount 3M Pak Connectors, 3M CF Card Headers and 3M PCMCIA Sockets and Headers
General Process Specification for Reflow Soldering of Boardmount 3M Pak Connectors, 3M CF Card Headers and 3M PCMCIA Sockets and Headers Technical Report November 2004 78-8136-1133-8-A Table of Contents
More information3M I/O Connector Mounting Options and Hardware
M I/O Connector Mounting Options and Hardware Hardware Guide Date Modified: January 14, 2008 Part Number Type Mounting Hardware Applications - Table 1 Mini D Ribbon (MDR) Conn. s D Sub Conn. s D Ribbon
More information3M Connectors for Embedded Systems Connectors for AdvancedTCA, CompactPCI and MicroTCA Systems from 3M
3M Connectors for Embedded Systems Connectors for AdvancedTCA, CompactPCI and MicroTCA Systems from 3M 3M 2011. All Rights Reserved. Introduction Purpose To explain the features and benefits of the connectors
More information3M SlimLine 85ohm Cable Assembly
Product Specifications May 2017 78-5102-0240-7, Rev B Scope This document summarizes test methods, test conditions, and product performance requirements for 3M SlimLine 85ohm Cable Assembly. Reference
More informationStandard Products Assembly Equipment Table 3M Electronic Products Division
Plug Connectors 3M plug connectors can be used with either flat cable or discrete wire and are the ideal interface for standard sockets. They can be used as a T-tap from a cable bus, a splice connector
More information3M DSLAM Mounting Bracket Kit J0746
3M DSLAM Mounting Bracket Kit J0746 Instructions July 2009 3 Contents 1.0 3M DSLAM Mounting Bracket J0746 - Installation...3 2.0 DSLAM Installation, Nokia...5 3.0 Accessory Kit, Cable Addition Shroud J0747
More information3M 100G QSFP28 Direct Attach Copper Cable Assemblies, 9Q Series
Product Specifications June 2017 78-5102-0262-1, Rev A 3M 100G QSFP28 Direct Attach Copper Cable Assemblies, 9Q Series Scope This document summarizes test methods, test conditions, and product performance
More informationDUBOX SHUNTS BOARD/WIRE-TO-BOARD CONNECTORS FEATURES & BENEFITS. Dual-beam contacts for added reliability
BOARD/WIRE-TO-BOARD CONNECTORS DUBOX SHUNTS FEATURES & BENEFITS Dual-beam contacts for added reliability Slotted cutout in low profile housing simplifies electrical testing Side-by-side and end-to-end
More information3M Connectors for CFast Cards The Next Generation of Removable CompactFlash Storage
3M Connectors for CFast Cards The Next Generation of Removable CompactFlash Storage 3M 2011. All Rights Reserved. Introduction Purpose To explain the features and benefits of the 3M Connectors for removable
More information3M Quick Connect System (QCS) 2814
Communication Markets Division 3M Quick Connect System (QCS) 2814 Designed for your broadband network The 3M Quick Connect System 2814 is a terminal/cross-connect system featuring integrated protection
More information3M Add-On Terminals 4220P (100, 200, 300 & 400 pairs)
3M Add-On Terminals 4220P (100, 200, 300 & 400 pairs) Instructions August 2011 3 78-8130-2330-1-C 1.0 General 1.1 The 3M Add-On Terminals 4220P-100, 4220P-200, 4220P-300 and 4220P-400 are designed to expand
More informationProduct Discontinuation Notice 3M Assorted Japan Sourced Connectors
Product Discontinuation Notice 3M Assorted Japan Sourced Connectors Issue Number: 756 Date: March 26, 2010 Product Discontinuance Effective June 1, 2010, 3M will exit a few assorted low volume Japanese
More informationPGA / BGA / PLCC SOCKETS
PGA / BGA / PLCC SOCKETS QUICK SELECTOR CHART PGA / BGA / PLCC PGA BGA PLCC GRID 2.54 mm INTERSTITIAL 1.27 mm 1.27 mm 1 mm SOCKETS Solder tail 156 161 165 SEE PAGE 173 Surface mount 156 161 165 166 169
More information3M Quick Connect System (QCS) 2811
Communication Markets Division 3M Quick Connect System (QCS) 2811 Designed for your broadband network The 3M Quick Connect System (QCS) 2811 is an insulation displacement connector (IDC) termination system
More informationBOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) MICTOR RECEPT ASSY, 38 POS.
More informationProduct Specification. Mezza-pede SMT Connector Low Profile 1.0mm Pitch
Mezza-pede SMT Connector Low Profile 1.0mm Pitch Rev. 1 December 7, 2016 1.0 Scope This product specification applies to 1.0mm pitch Mezza-pede SMT Connectors, designed for the mating and unmating of a
More information3M Passive Optical Splitter Shelves and Modules
Communication Markets Division 3M Passive Optical Splitter Shelves and Modules 3M offers a robust portfolio of passive optical fiber splitter products made to enable easy configuration, design, ordering,
More informationA Full Range for Different Applications The STG2000 modules offer three different types of IDC circuits. The Network of Networks
The Network of Networks 3M High Density Cross-Connect Modules STG2000 Series The 3M High Density Cross-Connect Modules STG2000 Series are IDC copper cross-connects that can be used in a wide variety of
More information3M Indoor Protected Building Entrance Terminal 4788V-QCS Series
The Network of Networks. 3M Indoor Protected Building Entrance Terminal 4788V-QCS Series with 3M Quick Connect System (QCS) 2811 Dry Flame Retardant Block for Field-Terminated Building Cables Instructions
More information3M Cross-Connect Cabinet Riser Installation Guide
3M Cross-Connect Cabinet Riser Installation Guide Installing riser in stake, hand hole and pad-mount applications Instructions October 2016 78-0015-3063-9-B 2 October 2016 78-0015-3063-9-B Contents 1.
More informationDubox Product Presentation
Product Presentation Basics Portfolio Agenda 1. Value Proposition 2. Product Overview 3. Product Specifications 4. Features & Benefits 5. Part Numbers 6. Markets & Applications 7. Marcomm Collaterals Product
More informationBOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) MICT,REC,038,ASY,.025,TAPE,CAP
More informationQUICKIE SHROUDED HEADERS LOW PROFILE
BOARD/WIRE-TO-BOARD CONNECTORS QUICKIE SHROUDED HEADERS LOW PROFILE FEATURES & BENEFITS Recessed pins assure proper alignment and eliminate damage during mating End windows for latching with IDC receptacle
More information3M Power Clamp System Power/Signal Distribution I/O Connector System
3M Power Clamp System Power/Signal Distribution I/O Connector System 3M 2011. All Rights Reserved. Introduction Purpose To explain the features and benefits of the 3M Power Clamp System Objectives Highlight
More information3M Indoor Protected Building Entrance Terminal (IBET) 4688V Series
3M Indoor Protected Building Entrance Terminal (IBET) 4688V Series Instructions Underwriters Laboratories (UL 348X) Listed February 2017 78-0013-6127-4-B 2 February 2017 78-0013-6127-4-B 1.0 General The
More information3M Indoor Protected Building Entrance Terminal 4588V-QCS Series
3M Indoor Protected Building Entrance Terminal 4588V-QCS Series with 3M Quick Connect System 2811 Dry Flame Retardant Block Instructions Underwriters Laboratories (UL 348X) Listed April 2010 3 78-0013-1813-4-A
More informationBOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS
BOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS MINITEK UNSHROUDED VERTICAL HEADERS TECHNICAL INFORMATION MATERIALS Housing: High temperature, black thermoplastic Flammability rating:
More information3M Compact Coarse Wave Division Multiplexer (CCWDM) Module Installation
3M Compact Coarse Wave Division Multiplexer (CCWDM) Module Installation Instructions June 2010 3 Contents 1.0 Introduction...3 2.0 Kit Contents...3 3.0 Preparation and Installation of One and Two 3M Compact
More information3M Indoor Building Entrance Terminal (IBET) 4790V and 4790VL Series
3M Indoor Building Entrance Terminal (IBET) 4790V and 4790VL Series with 3M Quick Connect System (QCS) 2811 Dry Flame-Retardant Block and RJ-11 Test Ports Instructions Underwriters Laboratories (UL 348X)
More informationNew Product Release Summary for 3M Authorized Sales Reps and Distributors 3M Industrial M12 Wiremount Connectors, 3N104 and 3N304 Series
3M Industrial M12 Wiremount Connectors, 3N104 and 3N304 Series Issue Number: 838 Date: December 12, 2012 Product Description The 3M Industrial M12 Wiremount Connectors are an expansion of 3M s extensive
More informationPower Connectors & Interconnection Systems
Product Facts Available in latch versions for VRMs up to 3 oz. Available with metal clip for VRMs over 3 oz. VRM connectors to support a wide variety of power supply standards Solder tail, press-fit and
More informationPC/104, PC/104 Plus Specification
PC/104, PC/104 Plus Specification Industry Standard bus connection systems, typically used on embedded PC applications. Designed for oard-to-oard stacking with a common bus. PC/104 Connectors mm pitch
More informationThe con ectors serve low durability cycle applications
Power Connectors & Interconnection Systems Introduction to High Current Card Edge Connectors Product Facts Contacts on.100 [2.54] Centerlines Selective gold plating of contacts for high performance at
More informationCOMPONENT SPECIFICATION. PC/104 AND PC/104 Plus CONNECTORS JANUARY 2013 CONTENTS: SECTION TITLE PAGE
PC/104 AND PC/104 Plus CONNECTORS JANUARY 2013 CONTENTS: SECTION TITLE PAGE 1 Description of Connector and Intended Application 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix 1 Part Number
More informationSOD123F (Type B) Top View. Part Number Compliance Case Packaging (Type Number)-7* AEC-Q101 SOD123F (Type B) 3,000/Tape & Reel
SURFACE MOUNT ZENER DIODE Features Flat Lead Package Design for Low Profile and High Power Dissipation Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. Green Device (Note
More informationProduct Details
My Cart My Part Lists Sign In/Register English (Change) Have a Question? Chat with a Product Information Specialist What can we help you find? Products Industries Resources About TE My Account Innovation
More informationCatalog C-035 Rev. C
Catalog C-035 Rev. C P O S I T R O N I C I N D U S T R I E S Today, some customer applications have requirements for high bandwidth transfer between VMEbus cards. Requirements which even the most updated
More informationIndoor Protected Entrance Terminal 4588 Series
Indoor Protected Entrance Terminal 4588 Series Instructions Underwriters Laboratories (UL) Listed September 2003 78-8135-1209-8-A 1.0 General The 3M Indoor Protected Entrance Terminal (PET) 4588 Series
More informationModel 1100B CHG Terminator. Operating Instructions
Model 1100B CHG Terminator Operating Instructions 1 Contents: 1.0 Safety Information... 3 2.0 General Introduction... 3 3.0 Operation... 4 2.8 2.1 2.7 V 2.2 2.9 2.2 2.10 2.11 2.11 2.3 2.4 2.5 2.5 2.6 2
More information3M Textool Open-Top Test and Burn-In Sockets for Ball Grid Array Packages
3M Textool Open-Top Test and Burn-In Sockets for Ball Grid Array Packages 3Innovation Table of Contents Product Advantages...1 Durability...1 Reliability...2 Micro-Wiping and Solder Ball Deformation...3
More informationD-SUBMINIATURE PIN-IN-PASTE CONNECTORS
INPUT/OUTPUT CONNECTORS D-SUBMINIATURE PIN-IN-PASTE CONNECTORS OVERVIEW The D-Subminiature connectors are one of the most popular I/O solutions, addressing segments such as Telecommunications, Industrial,
More informationAmphenol. Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN.
Amphenol Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN. FEATURES & BENEFITS Available in 2 through 4 rows - Offers maximum design flexibility Tested and qualified to
More informationHIGH POWER HOT PLUGGABLE INTERCONNECTION SYSTEM. US Patent # 6,299,492 B1 2. POWER, RIGHT ANGLE EARLY 3. POWER, RIGHT ANGLE EARLY
HIGH POWER HOT PLUGGABLE INTERCONNECTION SYSTEM US Patent # 6,299,492 B1 The HOTMATE board to board interconnection system provides a unique method of transferring hot pluggable power requirements within
More informationUSB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
More informationConductive Pressure Sensitive Cover Tape 2666
3 Conductive Pressure Sensitive Cover Tape 2666 Technical Data January, 2007 Product Description 3M Conductive Pressure Sensitive Cover Tape 2666 is a transparent, conductive polyester film tape with a
More informationIntroduction to High Current Card Edge Connectors
Introduction to High Current Card Edge Connectors Product Facts Contacts on.100 [2.54] Centerlines Selective gold plating of contacts for high performance at low cost Flow solder applications Glass-filled
More informationMounting Bracket for 8 in. Charles Industries Pedestal for use with 3M Fiber Dome Terminal Closure FDT 08
Mounting Bracket for 8 in. Charles Industries Pedestal for use with 3M Fiber Dome Terminal Closure FDT 08 Instructions October 2006 78-8135-6184-8-A 1.0 Introduction This kit mounts a 3M Fiber Dome Terminal
More informationUSB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
More informationElcon CROWN EDGE Card Edge-style High Current Connectors
Elcon CROWN EDGE Card Edge-style High Current Connectors CROWN EDGE is a board-to-board power interconnect solution that uses Elcon high performance Crown contact technology configured to mate directly
More informationProduct Data Sheet. 3M Active Optical Cable (AOC) Assemblies for CX4 and QSFP+ Applications
78-5102-0126-8 B Product Data Sheet 3M Active Optical Cable (AOC) Assemblies for CX4 and QSFP+ Supersedes: Rev A Page: 1 of 9 Table of Contents 1.0 DESCRIPTION...2 2.0 AOC BLOCK DIAGRAM...2 3.0 CONNECTOR
More informationUSB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
More informationCABLE CONNECTOR 6100/6200/6200S/6230 SERIES. 2.54mm Pitch Flat Ribbon Cable Connector K-7
CABLE CONNECTOR 2.54mm Pitch Flat Ribbon Cable Connector 6/6/6S/62 SERIES K-7 6/6/6S/62 SERIES 2.5mm PITCH FC CONNECTOR 2.54mm Pitch FC Connector Product Line-up SERIES / FIGURE TYPE CONNECTOR STYLE TERMINATION
More informationRIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) A/L UNIV HDR 14P VERT AMP-LATCH Universal
More informationSOD123. Top View. Date Code Key Year Code A B C D E H I J K L
SURFACE MOUNT ZENER DIODE Features Mechanical Data Planar Die Construction 5mW Power Dissipation General Purpose, Medium Current Ideally Suited for Automated Assembly Processes Totally Lead-Free & Fully
More informationI/O 4 NC I/O 3 I/O 1 V SS I/O 2
4 CHANNEL LOW CAPACITANCE TVS DIODE ARRAY Features Low Clamping Voltage Typical 9V at 10A 100ns, TLP Typical 9V at 10A 8μs/20μs IEC 61000-4-2 (ESD): Air ±30kV, Contact ±30kV IEC 61000-4-4 (EFT): 60A(5/50ns,
More informationDETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-83503/24C 4 August 2010 SUPERSEDING MIL-DTL-83503/24C 21 July 2004 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, FLAT CABLE, NONENVIRONMENTAL FOUR WALL HEADER, RIGHT ANGLE (.100
More informationSSL - Top Load Socket
The 9159 series of Board-to-Board interconnect system allows two PCB's to be mated end-to-end creating strips of LED lighting. Designed specifically for the unique Solid State Lighting (SSL) market requiring
More informationProduct Details
My Cart My Part Lists Sign In/Register English (Change) Have a Question? Chat with a Product Information Specialist What can we help you find? Products Industries Resources About TE My Account Innovation
More informationRIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) IDC LOW PRO HDR 30P VERT LG LA AMP-LATCH
More informationUSB, MINI USB, MICRO USB FIREwIRE & MINI FIREwIRE UNIVeRSAl SeRIAl BUS & Ieee 1394 FIRewIRe USB & FwC SeRIeS
introduction: Adam Tech USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available in a variety
More informationPart Number Compliance Case Packaging (Type Number)-7* Commercial SOD323 3,000/Tape & Reel
SURFACE MOUNT PRECISION ZENER DIODE Features Very Sharp Breakdown Characteristics Very Tight Tolerance on V Z Ideally Suited for Automated Assembly Processes Very Low Leakage Current Totally Lead-Free
More informationModular FLATPAQ. provided, and Elcon will provide samples, typically within one week.
Modular FLATPAQ Modular FLATPAQ connectors provide custom solutions to hot pluggable AC and DC power needs in a board-to-board format. By using off-the-shelf modular components, power and signal modules,
More informationAMPMODU System 50 Connectors
AMPMODU System 50 Connectors (Page 52) (Page 44) (Page 8) (Page 40) (Page 45) (Page 9) (Page 1) (Page 29) AMPMODU System 50 (Page 4) (Page 0) (Page ) (Page 50) Double Row,.025 Ribbon Cable Mount Receptacle
More information2mm Pitch Miniature Connector for HDD
2mm Pitch Miniature Connector for HDD A3E Series Product Specifications Rating type without polarizing guide type with polarizing guide Features 1. Variation in Number of Contacts This connector can be
More informationSSL 1.1 Series. Product Data Sheet REV. 4, 2014 JUN
SSL 1.1 Series Product Data Sheet REV. 4, 2014 JUN General Specification Number of Positions Current Rating 2, 4, 6P 3A (Max) Voltage Rating Dielectric Withstand Voltage Durability Color Operating Temperature
More informationRIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) 20 NOVO MIL/CTR 15DP,LEAD FREE 1658621-4
More informationMini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
More informationFeatures. Case Material: Molded Plastic, Green Molding Compound. Computers and Peripheral
LOW CAPACITANCE BIDIRECTIONAL TVS DIODE Product Summary V BR (Min) I PP (Max) C T (Typ) 15V 9A 2pF Description This new generation TVS is designed to protect sensitive electronics from the damage due to
More informationRight Angle 2.0mm Pitch Connector
AVX extends their board-to-board right angle connectors with a new 2mm pitch version, an addition to the existing versions 9155-300 with a 3mm pitch and 9155-500 with a 2.5mm pitch. This new connector
More informationMini-Universal MATE-N-LOK 2 Connectors
MP Mini-Universal MTE-N-LOK 2 Product Facts One molded piece, secondary locking plug and cap housing assemblies Three-point stabilization to provide better terminal position Fully polarized to provide
More information3M SLiC Fiber Splicing Workstation with Cleaver Arm
3M SLiC Fiber Splicing Workstation with Cleaver Arm Terminal Closure 530 Closures 533, 547 and 733 Instructions September 2016 78-8135-7148-2-D 2 September 2016 78-8135-7148-2-D 1.0 General 1.1 The 3M
More information3M Sensored Cable Accessories for Underground Medium Voltage Distribution System
3M Sensored Cable Accessories for Underground Medium Voltage Distribution System 3M Electronics & Energy Business 1 Introduction The focus on enhancing reliability and efficiency of the power grid has
More informationCOMMUNICATIONS, DATA, CONSUMER DIVISION DIN Selector Guide. PCB Connectors
COMMUNICATIONS, DATA, CONSUMER DIVISION DIN 41612 Selector Guide PCB Connectors FCI: SETTING THE STANDARD FOR CONNECTORS With operations in 30 countries, FCI is a leading manufacturer of connectors. Our
More informationAMP-LATCH RIBBON CABLE INTERCONNECT SOLUTIONS
AMP-LATCH RIBBON CABLE INTERCONNECT SOLUTIONS Quick Reference Guide AMP-LATCH connectors are ribbon cable-to-board devices used to make the transition between ribbon cable and pc board circuitry. They
More informationMini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
More informationCommercial MATE-N-LOK Connectors
MP Commercial MTE-N-LOK Connectors Product Facts Fully polarized nylon housings Easy cavity identification Locking devices are integral part of design. Connector halves will hold together under severe
More informationSEPTEMBER C.CS.1000 / GB
SEPTEMBER 2005 - C.CS.1000 / GB C R I M P F L E X C O N N E C T O R S CRIMPFLEX connectors TECHNICAL DATA MATERIAL Phosphor bronze MALE SOLDER TAB PLATING The standard connector is tin plated (thickness
More informationFLAT FLEXIBLE CABLE (FFC) CONNECTORS
FLAT FLEXIBLE CABLE (FFC) CONNECTORS TE Connectivity s (TE) family of FFC connectors includes a variety of high density cable-to-board and cable-to-cable connectors designed for automated assembly. The
More information500mW, 2% Tolerance SMD Zener Diode
500mW, 2% Tolerance SMD Zener Diode FEATURES - Wide zener voltage range selection : 2.4V to 75V - Surface mount device type - Moisture sensitivity level - Pb free and RoHS compliant - V Z Tolerance Selection
More informationDistributed by: www.jameco.com -800-8-44 The content and copyrights of the attached material are the property of its owner. Pin and Socket Mini-Universal MTE-N-LOK Product Facts Compact, durable housings
More informationCF CARD CONNECTOR MA Type
Emboss Tape CF CARD CONNECTOR MA Type 1.27mm pitch/50-circuit CF card connector Socket / Dual-row straddle type, SMT type Card frame / for type I cards Adapter / for type I, II cards Header / for type
More informationMicro D Series Filtered Connectors
Micro D Series Filtered Connectors For designs that require even smaller connector packages, API s Spectrum Control brand has designed a line of filtered Micro D-Subminiature connectors. This line of connectors
More information3M Constant Monitors WSMONITOR1, WSMONITOR 2, WSMONITOR3
3M Constant Monitors WSMONITOR1, WSMONITOR 2, WSMONITOR3 User s Guide WSMONITOR1 WSMONITOR2 WSMONITOR3 Table of Contents Section Page SAFETY INFORMATION...3 Introduction...5 Installation...6 Operation...9
More informationElma Bustronic CompactPCI Reference Sheet
Elma Bustronic CompactPCI Reference Sheet Rev. 4 5.10.10 The cpci reference sheet provides relevant reference material for the CompactPCI product line. The information provided may change at anytime. Elma
More informationMolex s family of high-speed Micro SAS Connectors featuring the Dual-stack Receptacle with Pin Cover
Design-enhanced Micro SAS connectors now include dual-drive stacked receptacles with an integrated ground plane and a protective pin cover for greater reliability in compact storage applications Molex
More informationDirectory chapter 05. D-Sub Filter subminiature D connectors, 2.54 mm pitch
F Directory chapter 05 D-Sub Filter subminiature D connectors, 2.54 mm pitch New Page General information.............................................. 05.02 Technical characteristics..........................................
More informationDynatel Advanced Modular System 965AMS ADSL2+ Service Module
3 Dynatel Advanced Modular System 965AMS ADSL2+ Service Module User s Guide Future-Proof Testing Platform May 2006 78-8135-5269-8 Contents ADSL2+ Service Module...5 Module Installation...5 Hook-Up...6
More information500mW, 5% Tolerance SMD Zener Diodes
500mW, 5% Tolerance SMD Zener Diodes FEATURES Wide zener voltage range selection: 2.4V to 5V V Z tolerance selection of ± 5% Moisture sensitivity level: level, per J-STD-020 Compliant to RoHS directive
More informationFeatures U-DFN Pin Description (Top View)
4 CHANNEL LOW CAPACITANCE TVS DIODE ARRAY Product Summary V BR (Min) I PP (Max) C I/O (Typ) 5.5V 3.5A 0.45pF Description The is a high-performance device suitable for protecting four high speed I/Os. These
More information2.5mm & 3.5mm AUDIO JACKS STEREO & MONO EARPHONE JACKS ASJ SERIES
.mm &.mm AUDIO JACKS INTRODUCTION: Adam Tech ASJ Series Stereo Jacks are a broad range of.mm and.mm jacks used primarily in computer and multi-media audio applications. This series provides a multitude
More informationMini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
More information343
.050" IDC CONNECTORS DUL ROW SOCKETs & Transition Plugs HFCS & HFDP SERIES Introduction: dam Tech.050" IDC Sockets and Transition Plugs are low profile, precision designed flat cable connectors that feature
More information