Embedded System MCU ARM. Bolymin Display MCU - BEGVxx Series - BE6xx Series ARM -BE9xx Series

Size: px

Start display at page:

Download "Embedded System MCU ARM. Bolymin Display MCU - BEGVxx Series - BE6xx Series ARM -BE9xx Series"

Lizbeth Phelps
5 years ago
Views:

1 Embedded System Bolymin Display MCU - BEGVxx Series - BE6xx Series ARM -BE9xx Series MCU ARM

2 MCU Microprogrammed Control Unit - (BEGVxx Series) - (BE6xx Series) μp Monochrome LCM -BEGVxx Series μp TFT Display -BE6xx Series

3 MCU-μp Monochrome LCM - (BEGVxx Series) BEGV606M BEGV627M BEGV629M BEGV639M BEGV641A BEGV643A

4 MCU_1.1

5 Example code by C30 compiler is available. MCU_1.2 NOV-2012

BEGV627M Display Embedded System EEPROM PIC24F Microprocessor RS232 RS422 RS485 T/P Connector ISP port 12 pins Connector Your 64KB application software here!

consumption 180mA On-chip power-on reset (POR) and programmable watchdog reset 128 x 64 monochrome STN LCD Comprehensive set of development tools and application notes for self programming RS485 /

6 BEGV627M Display Embedded System EEPROM PIC24F Microprocessor RS232 RS422 RS485 T/P Connector ISP port 12 pins Connector Your 64KB application software here! Features High performance, Low power PIC 16-bit microprocessor Built-in 64KB ISP Flash memory / 8KB SRAM On board updateable 64KB EEPROM (128KB option) 1 x RS485 / 422 / 232, 1 x RS232 Current consumption 180mA On-chip power-on reset (POR) and programmable watchdog reset 128 x 64 monochrome STN LCD Comprehensive set of development tools and application notes for self programming RS485 / 422 / 232 driver, I²C EEPROM driver, touch panel driver, LCM driver and utility are supported Dimension (W x H x D): 93 x 70 x 15mm Hardware Specifications Processor Microchop PIC24FJ64GA bit microprocessor Memory 64KB in-system programmable flash 8KB internal SRAM 64KB x 1 external I²C CMOS EEPROM (option: 64KBx2) Display Interface Support I²C 128 x 64 monochrome STN LCD (edge LED white backlight) RS232 / 422 / 485 Port Support dual serial port, one is three-wired RS232, another is shared in among RS232/422/485 port by option Touch Panel Interface Support four-wired resisitive touch panel interface Software Utilities Support RS232 / 422 / 485 driver, I²C EEPROM driver, touch panel driver, and LCM driver for free DC Requirement DC4.5V~5.5V BOLYMIN, INC. MCU_2.1 VER:05 1

7 Example code by C30 compiler is available. MCU_

8 MCU_3.1

9 Example code by C30 compiler is available. MCU_3.2 NOV

10 MCU_4.1

11 Example code by C30 compiler is available. MCU_4.2 NOV-2012

BEGV641A Display Embedded System T/P Connector RS485 32 pins Connector (With ISP port) RS232 B / L RS422 Your 64KB/128KB(option) application

LCD Controller EEPROM ATMEL Microprocessor Features High performance, Low power AVR 8-bit microprocessor Built-in 64KB/128KB ISP Flash

4-wired resistive touch panel Current consumption 180mA 240 x 128 monochrome STN LCD On-chip power-on reset(por) and programmable watchdog

touch panel driver, LCM driver and utility are supported Dimension (W x H x D): 148 x 74.

flash 2KB/4KB internal EEPROM 4KB/16KB internal SRAM 64KB x 2 external I²C CMOS EEPROM (option: 64KBx3) Display Interface Support 8-bit

RS232, another is shared in among RS232 / isolated RS422 / isolated RS485 port by option Serial Peripheral Interface One full-duplex,

12 BEGV641A Display Embedded System T/P Connector RS pins Connector (With ISP port) RS232 B / L RS422 Your 64KB/128KB(option) application program here! LCD Controller EEPROM ATMEL Microprocessor Features High performance, Low power AVR 8-bit microprocessor Built-in 64KB/128KB ISP Flash Memory, 4KB/16KB SRAM On board updateable 128KB EEPROM (plus 64KB option) One RS485 / 422 / 232, 1 x RS232 High speed SPI and I²C Built-in 4-wired resistive touch panel Current consumption 180mA 240 x 128 monochrome STN LCD On-chip power-on reset(por) and programmable watchdog reset Comprehensive set of development tools and application notes for self programming RS485 / 422 / 232 driver, SPI driver, I²C driver, touch panel driver, LCM driver and utility are supported Dimension (W x H x D): 148 x 74.6 x 20mm Hardware Specifications Processor ATMEL ATmega644P/ATmega1284P AVR 8-bit microprocessor Memory 64KB/128KB in-system programmable flash 2KB/4KB internal EEPROM 4KB/16KB internal SRAM 64KB x 2 external I²C CMOS EEPROM (option: 64KBx3) Display Interface Support 8-bit single scan 240 x 128 monochrome STN LCD (edge LED white backlight) RS232 / 422 / 485 Port Support dual serial port, one is three-wired RS232, another is shared in among RS232 / isolated RS422 / isolated RS485 port by option Serial Peripheral Interface One full-duplex, three-wired synchronous data transfer SPI port One two-wired serial interface(i²c) up to 250KHz data transfer speed Touch Panel Interface Support four-wired resisitive touch panel interface Software Utilities Support RS232 / 422 / 485 driver, SPI driver, I²C driver, touch panel driver, and LCM driver for free DC Requirement DC4.5V~5.5V BOLYMIN, INC. MCU_5.1 1

13 BEGV641A Packing List BEGV641A Embedded System User Manual Software Utility Disc MKII and ISP Cable (option) BEGV641A BLOCK DIAGRAM HS-SPI AVR 8-bit Microprocessor I²C 240 x 128 STN Display Touch Panel 64KB/128KB ISP Flash 2KB/4KB Internal EEPROM 4KB/16KB Internal SRAM (default) (by option) RS232 RS232 isolated RS-485 isolated RS-422 I²C 64KB x 3 EEPROM (Optional) IO Pin Mapping Table PIN NO. Signal PIN NO. Signal PIN NO. Signal GND EEPSDA VDD EEPSCL Vadj EEPWP Vout IOB /Reset NC /SS RP MOSI 422RN MISO 422TP/485P SCK 422TN/485N RX0 VDD2 TX0 VDD RX1 GND2 TX1 GND2 SDA EN485 SCL A IOA K Order Information Parts NO. Description RS232-A RS232-B RS422 RS485 BEGV641A Dual RS232 BEGV641A1 One RS232 BEGV641A2 One RS232/One RS422 BEGV641A3 One RS232/One RS485 Display: FSTN/Gray LCD,LED/White Backlight(Default) MCU_5.2 2

BEGV643A Display Embedded System ATMEL Microprocessor T/P Connector RS422 LCD Controller Features Your 64KB/128KB(option) application program

(plus 64KB option) One RS485 / 422 / 232, 1 x RS232 High speed SPI and I²C Built-in 4-wired resistive touch panel Current consumption 180mA 320

Comprehensive set of development tools and application notes for self programming RS485 / 422 / 232 driver, SPI driver, I²C driver, touch panel

5mm Hardware Specifications Processor ATMEL ATmega644P/ATmega1284P AVR 8-bit microprocessor Memory 64KB/128KB in-system programmable flash

320 x 240 monochrome STN LCD (edge LED white backlight) RS232 / 422 / 485 Port Support dual serial port, one is three-wired RS232, another is

data transfer SPI port One two-wired serial interface(i²c) up to 250KHz data transfer speed Touch Panel Interface Support four-wired resisitive

14 BEGV643A Display Embedded System ATMEL Microprocessor T/P Connector RS422 LCD Controller Features Your 64KB/128KB(option) application program here! High performance, Low power AVR 8-bit microprocessor Built-in 64KB/128KB ISP Flash Memory, 4KB/16KB SRAM On board updateable 128KB EEPROM (plus 64KB option) One RS485 / 422 / 232, 1 x RS232 High speed SPI and I²C Built-in 4-wired resistive touch panel Current consumption 180mA 320 x 240 monochrome STN LCD EEPROM RS pins Connector (With ISP port) On-chip power-on reset(por) and programmable watchdog reset Comprehensive set of development tools and application notes for self programming RS485 / 422 / 232 driver, SPI driver, I²C driver, touch panel driver, LCM driver and utility are supported Dimension (W x H x D): 160 x 109 x 16.5mm Hardware Specifications Processor ATMEL ATmega644P/ATmega1284P AVR 8-bit microprocessor Memory 64KB/128KB in-system programmable flash 2KB/4KB internal EEPROM 4KB/16KB internal SRAM 64KB x 2 external I²C CMOS EEPROM (option: 64KBx3) Display Interface Support 8-bit single scan 320 x 240 monochrome STN LCD (edge LED white backlight) RS232 / 422 / 485 Port Support dual serial port, one is three-wired RS232, another is shared in among RS232 / isolated RS422 / isolated RS485 port by option Serial Peripheral Interface One full-duplex, three-wired synchronous data transfer SPI port One two-wired serial interface(i²c) up to 250KHz data transfer speed Touch Panel Interface Support four-wired resisitive touch panel interface Software Utilities Support RS232 / 422 / 485 driver, SPI driver I²C driver, touch panel driver and LCM driver for free DC Requirement DC4.5V~5.5V Operation Temperature -20 ~ 70 BOLYMIN, INC. MCU_6.1 VER:08 1

15 BEGV643A Packing List BEGV643A Embedded System User Manual Software Utility Disc MKII and ISP Cable (option) BEGV643A BLOCK DIAGRAM HS-SPI AVR 8-bit Microprocessor 64KB/128KB ISP Flash (default) I²C RS x 240 STN Display Touch Panel 2KB/4KB Internal EEPROM 4KB/16KB Internal SRAM (by option) RS232 isolated RS-485 isolated RS-422 I²C 64KB x 3 EEPROM (Optional) IO Pin Mapping Table PIN NO. Signal PIN NO. Signal PIN NO. Signal GND EEPSDA VDD EEPSCL Vadj EEPWP Vout IOB /Reset NC /SS RP MOSI 422RN MISO 422TP/485P SCK 422TN/485N RX0 VDD2 TX0 VDD RX1 GND2 TX1 GND2 SDA EN485 SCL A IOA K Order Information Parts NO. Description RS232-A RS232-B RS422 RS485 BEGV643A Dual RS232 BEGV643A1 One RS232 BEGV643A2 One RS232/One RS422 BEGV643A3 One RS232/One RS485 Display: FSTN/Gray LCD,LED/White Backlight(Default) MCU_6.2

16 MCU-μp TFT Display - (BE6xx Series) BE635 BE643 BE643WF BE657

BE635 Display Embedded System 512 MicroSD GPIO RS-485 RS-422 RS-232 I²C 3.

SD 1xRS232, 1xSPI, 1xI²C 1xRS232/422/485/USB port (selected one from four) 1xADC, 12xGPIO Built-in Buzzer 3.

programming RS232/422/485/USB driver, SPI driver, I²C driver, touch panel driver, TFT driver are supported Dimension

flash 64KB internal SRAM 16KB EEPROM Display 3.

SPI port One two-wired serial interface (I²C) up to 400KHz data transfer speed RS232/422/485/USB port RS232

other is selected from RS232/422/485/USB port External I/O Support ADC (1 x channel, 10 bits Resolution) Support

17 BE635 Display Embedded System 512 MicroSD GPIO RS-485 RS-422 RS-232 I²C C~70 C High performance, PIC32 32-bit microprocessor Built-in 512KB ISP flash memory, 64KB SRAM Support micro SD 1xRS232, 1xSPI, 1xI²C 1xRS232/422/485/USB port (selected one from four) 1xADC, 12xGPIO Built-in Buzzer 3.5" TFT-LCD with 320x240 (QVGA) resolution Comprehensive set of device library and programming guide for self programming RS232/422/485/USB driver, SPI driver, I²C driver, touch panel driver, TFT driver are supported Dimension (WxHxD): 93x67x15mm Weight: 92g Processor Microchip PIC32 32-bit microprocessor Memory 512KB in-system programmable flash 64KB internal SRAM 16KB EEPROM Display 3.5 TFT panel 320X240 QVGA With LED Backlight Serial interface One full-duplex, four-wired synchronous data transfer SPI port One two-wired serial interface (I²C) up to 400KHz data transfer speed RS232/422/485/USB port RS232 (standard) RS232/422/485/USB Port (selected one from four) Support dual serial port, one is three-wired RS232, the other is selected from RS232/422/485/USB port External I/O Support ADC (1 x channel, 10 bits Resolution) Support GPIO (12 x GPIO) Touch Panel Interface Support four-wired resistive touch panel interface Software Utilities Support RS232/422/485/USB driver, SPI driver, I²C driver, touch panel driver, and TFT driver for free DC Requirement DC 5.0 V MCU_7 DEC VER: 02

BE643 Display Embedded System 512 MicroSD 5V GPIO RS-485 RS-422 RS-232 I²C 4.

SD 1xRS232, 1xSPI, 1xI²C 1xRS232/422/485/USB port (selected one from four) 1xADC, 12xGPIO 4.

25mm Weight: 130g Processor Microchip PIC32 32-bit microprocessor Memory 512KB in-system programmable flash 64KB

3 TFT panel 480X272 WQVGA With LED Backlight Serial interface One full-duplex, four-wired synchronous data transfer

(standard) RS232/422/485/USB 2/42 Port (selected one from four) Support dual serial port, one is three-wired RS232,

18 BE643 Display Embedded System 512 MicroSD 5V GPIO RS-485 RS-422 RS-232 I²C C~70 C High performance, PIC32 32-bit microprocessor Built-in 512KB ISP flash memory, 64KB SRAM Support micro SD 1xRS232, 1xSPI, 1xI²C 1xRS232/422/485/USB port (selected one from four) 1xADC, 12xGPIO 4.3" TFT-LCD with 480X272 (WQVGA) resolution Comprehensive set of device library and programming guide for self programming RS232/422/485/USB driver, SPI driver, I²C driver, touch panel driver, TFT driver are supported Dimension (WxHxD): 125.8x71.5x14.25mm 14.25mm Weight: 130g Processor Microchip PIC32 32-bit microprocessor Memory 512KB in-system programmable flash 64KB internal SRAM 16KB EEPROM Display 4.3 TFT panel 480X272 WQVGA With LED Backlight Serial interface One full-duplex, four-wired synchronous data transfer SPI port One two-wired serial interface (I²C) up to 400KHz data transfer speed RS232/422/485/USB port RS232 (standard) RS232/422/485/USB 2/42 Port (selected one from four) Support dual serial port, one is three-wired RS232, the other is selected from RS232/422/485/USB port External I/O Support ADC (1 x channel, 10 bits resolution) Support GPIO (12 x GPIO) Touch Panel Interface Support four-wired resistive touch panel interface Software Utilities Support RS232/422/485/USB driver, SPI driver, I²C driver, touch panel driver, and TFT driver for free DC Requirement DC 5V MCU_8 SEP, 2015 VER: 02

BE643WF Display Embedded System 512 MicroSD 5V GPIO RS-485 RS-422 RS-232 I²C 4.

1xI²C 1xRS232/422/485/USB port (selected one from four) 1xADC, 12xGPIO 1xSpeaker 4.

RS232/422/485/USB driver, I²C driver, touch panel driver, TFT driver are supported Dimension (WxHxD): 121.5x69.

speed RS232/422/485/USB port RS232 (standard) RS232/422/485/USB 2/42 Port (selected one from four) Support dual serial port, one

19 BE643WF Display Embedded System 512 MicroSD 5V GPIO RS-485 RS-422 RS-232 I²C C~70 C High performance, PIC32 32-bit microprocessor Built-in 512KB ISP flash memory, 64KB SRAM Support micro SD 1xRS232, 1xI²C 1xRS232/422/485/USB port (selected one from four) 1xADC, 12xGPIO 1xSpeaker 4.3" TFT-LCD with 480X272 (WQVGA) resolution Comprehensive set of device library and programming guide for self programming RS232/422/485/USB driver, I²C driver, touch panel driver, TFT driver are supported Dimension (WxHxD): 121.5x69.4x16mm 16mm Weight: 175g Processor Microchip PIC32 32-bit microprocessor Memory 512KB in-system programmable flash 64KB internal SRAM 16KB EEPROM Display 4.3 TFT panel 480X272 WQVGA With LED Backlight Serial interface One two-wired serial interface (I²C) up to 400KHz data transfer speed RS232/422/485/USB port RS232 (standard) RS232/422/485/USB 2/42 Port (selected one from four) Support dual serial port, one is three-wired RS232, the other is selected from RS232/422/485/USB port External I/O Support ADC (1 x channel, 10 bits resolution) Support GPIO (12 x GPIO) Touch Panel Interface Support capactive touch panel Software Utilities Support RS232/422/485/USB driver, I²C driver, touch panel driver, and TFT driver for free DC Requirement DC 5V MCU_9 NOV, 2015 VER: 01

BE657 Display Embedded System 512 MicroSD 5V~24V GPIO

7-20 C~70 C High performance, PIC32 32-bit microprocessor

SD 1xRS232, 1xSPI, 1xI²C 1xRS232/422/485/USB port

7 TFT-LCD with 640x480 resolution (320X240 optional)

ramming guide for self programming RS232/422/485/USB

driver are supported Dimension (WxHxD): 164x106x29mm 106

microprocessor Memory 512KB in-system programmable flash

color TFT T at 18bpp mode With LED Backlight Serial

transfer SPI port One two-wired serial interface (I²C) up

(standard) RS232/422/485/USB Port (selected one from four)

other is selected from RS232/422/485/USB port External I/O

(12 x GPIO) Touch Panel Interface Support four-wired

20 BE657 Display Embedded System 512 MicroSD 5V~24V GPIO RS-485 RS-422 RS-232 I²C C~70 C High performance, PIC32 32-bit microprocessor Built-in 512KB ISP flash memory, 64KB SRAM Support micro SD 1xRS232, 1xSPI, 1xI²C 1xRS232/422/485/USB port (selected one from four) 1xADC, 12xGPIO Built-in Buzzer 5.7 TFT-LCD with 640x480 resolution (320X240 optional) Comprehensive set of device library and programming ramming guide for self programming RS232/422/485/USB driver, SPI driver, I²C driver, touch panel driver, TFT driver are supported Dimension (WxHxD): 164x106x29mm 106 Weight: 310g Processor Microchip PIC32 32-bit microprocessor Memory 512KB in-system programmable flash 64KB internal SRAM 16KB EEPROM Display 5.7 TFT panel 640X480 VGA 5.7 TFT panel 320X240 QVGA (optional) Support port 262K color TFT T at 18bpp mode With LED Backlight Serial interface One full-duplex, l four-wired synchronous data transfer SPI port One two-wired serial interface (I²C) up to 400KHz data transfer speed RS232/422/485/USB port RS232 (standard) RS232/422/485/USB Port (selected one from four) Support dual serial port, one is three-wired RS232, the other is selected from RS232/422/485/USB port External I/O Support ADC (1 x channel, 10 bits Resolution) Support GPIO (12 x GPIO) Touch Panel Interface Support four-wired resistive touch panel interface Software Utilities Support RS232/422/485/USB driver, SPI driver, I²C driver, touch panel driver, and TFT driver for free DC Requirement DC 5V~24V MCU_10 DEC VER: 05

21 ARM Advanced RISC Machine - (BE9xx Series) Mobile Data Terminal -BE9xx Series

22 ARM- Mobile Data Terminal - (BE9xx Series) BE905A1 BE905A2 BE905AF BE905G BE905F2

BE905A1 Mobile Data Terminal Features TI 1GHz 32-bit ARM Cortex-A8 Single Core CPU 512MB LPDDR emmc 4.41 I/F 8GB WINCE 6.

Built-in Battery Charger Circuit With Car Mount Internal 2W Speaker Hardware re Specifications cations Processor TI 1GHz Single

0 R3 Core License (without IE browser/media player/ayg shell etc.) System Memory LPDDR-400 512MB Internal Storage emmc 4.

Auto-adjustment by Light Sensor 4-wired Resistive Touch Panel Telecom (optional) Hexa-Band UMTS (800/850/900/1700/1900/2100 MHz)

2 Mbps Quad-band GSM (850/900/1800/1900 MHz) GPRS Class 33, CS1-CS4 107 Kps EDGE Class 33, MCS1-MCS9 296 Kbps External I/O

(2.0b with ISO 11898-1) Key Pads 7xUser Defined Programmable HotKey 1xPower Key Audio Internal 2 Watt Speaker (Mono) Internal

23 BE905A1 Mobile Data Terminal Features TI 1GHz 32-bit ARM Cortex-A8 Single Core CPU 512MB LPDDR emmc 4.41 I/F 8GB WINCE 6.0 CORE OS Support SD/SDHC Card 7" TFT LCD with 800x480 Resolution 4-wired Resistive Touch Panel 1xRS232C, 1xCAN BUS ADC, GPIO, USB 2.0 Device, USB 2.0 Host Built-in Light Sensor On Board 3G/GPS Module (optional) 7xUser Defined Programmable Key Pad DC 11V~30V Power Requirement Built-in Battery Charger Circuit With Car Mount Internal 2W Speaker Hardware re Specifications cations Processor TI 1GHz Single Core CPU (32-bit ARM Cortex-A8) USB 1xUSB 2.0 Host, 1xUSB 2.0 Device OS Windows Embedded CE6.0 R3 Core License (without IE browser/media player/ayg shell etc.) System Memory LPDDR MB Internal Storage emmc 4.41 I/F 8GB External Storage Support SD/SDHC Card Slot Up to 32GB Display 7" TFT LCD 800x480 WVGA With LED Backlight Backlight Auto-adjustment by Light Sensor 4-wired Resistive Touch Panel Telecom (optional) Hexa-Band UMTS (800/850/900/1700/1900/2100 MHz) HSPA: HSUPA 5.6 Mbps, HSDPA 7.2 Mbps Quad-band GSM (850/900/1800/1900 MHz) GPRS Class 33, CS1-CS4 107 Kps EDGE Class 33, MCS1-MCS9 296 Kbps External I/O Support ADC (2xChannel, 10-bits Resolution) Support GPIO (2xGP Input, 2xGP Output) Support RS232C (5-Wired UART) Support CAN BUS (2.0b with ISO ) Key Pads 7xUser Defined Programmable HotKey 1xPower Key Audio Internal 2 Watt Speaker (Mono) Internal Microphone External 3.5mm Mono Headset Jack (Mic/Earphone) Power Supply DC 11V~30V Internal Li-Polymer Battery of 2500 mah Operation Temperature -20 ~ 70 Chassis Industrial grade, IP54 (MDT+Power Cord) GPS (optional) 50-channel Receiver Engine Certification RoHS, Reach, WEEE, CE, FCC, E-MARK, UL Dimension 190mm(W)x140mm(H)x35mm(D) Weight 795g (w/ battery) 695g (w/o battery) ARM_1 DEC VER:08

BE905A2 Mobile Data Terminal Features TI 1GHz 32-bit ARM Cortex-A8 Single Core CPU 512MB LPDDR emmc 4.41 I/F 8GB Android 2.

0 Host Built-in Light Sensor On Board 3G/GPS Module (optional) 6xUser Defined Programmable Key Pad DC 11V~30V Power Requirement Built-in Battery Charger Circuit With Car

3 System Memory LPDDR-400 512MB Internal Storage emmc 4.

Resistive Touch Panel Telecom (optional) Hexa-Band UMTS(800/850/900/1700/1900/2100 MHz) HSPA: HSUPA 5.6 Mbps, HSDPA 7.

Reach, WEEE, CE, FCC, E-MARK, UL USB 1xUSB 2.0 Host, 1xUSB 2.

24 BE905A2 Mobile Data Terminal Features TI 1GHz 32-bit ARM Cortex-A8 Single Core CPU 512MB LPDDR emmc 4.41 I/F 8GB Android 2.3 OS Support SD/SDHC Card 7" TFT LCD with 800x480 Resolution 4-wired Resistive Touch Panel 1xRS232C, 1xCAN BUS ADC, GPIO, USB 2.0 Device, USB 2.0 Host Built-in Light Sensor On Board 3G/GPS Module (optional) 6xUser Defined Programmable Key Pad DC 11V~30V Power Requirement Built-in Battery Charger Circuit With Car Mount Internal 2W Speaker Hardware are Specifications Processor TI 1GHz Single Core CPU (32-bit ARM Cortex-A8) OS Android 2.3 System Memory LPDDR MB Internal Storage emmc 4.41 I/F 8GB External Storage Support SD/SDHC Card Slot Up to 32GB Display 7" TFT LCD 800x480 WVGA With LED Backlight Backlight Auto-adjustment by Light Sensor 4-wired Resistive Touch Panel Telecom (optional) Hexa-Band UMTS(800/850/900/1700/1900/2100 MHz) HSPA: HSUPA 5.6 Mbps, HSDPA 7.2 Mbps Quad-band GSM (850/900/1800/1900 MHz) GPRS Class 33, CS1-CS4 107 Kps EDGE Class 33, MCS1-MCS9 296 Kbps GPS (optional) 50-channel Receiver Engine Certification RoHS, Reach, WEEE, CE, FCC, E-MARK, UL USB 1xUSB 2.0 Host, 1xUSB 2.0 Device External I/O Support ADC (2xChannel, 10-bits Resolution) Support GPIO (2xGP Input, 2xGP Output) Support RS232C (5-Wired UART) Support CAN BUS (2.0b with ISO ) Key Pads 7xUser Defined Programmable HotKey 1xPower Key Audio Internal 2 Watt Speaker (Mono) Internal Microphone External 3.5mm Mono Headset Jack (Mic/Earphone) Power Supply DC 11V~30V Internal Li-Polymer Battery of 2500 mah Operation Temperature -20 ~ 70 Chassis Industrial grade, IP54 (MDT+Power Cord) Dimension 190mm(W)x140mm(H)x35mm(D) Weight 795g (w/ battery) 695g (w/o battery) ARM_2 DEC VER:03

BE905AF (Vehicle-mounted Computer) Cam2 (Video) Cam3 (Video) Cam4 (Video) AV-out IN IN 1GHz CPU, 512MB RAM, Android OS 7" TFT, Touch Panel, 3G/GPS module AV-out x 1, AV-in x 1, Video-in x 3 Built-in

Support CAN BUS (2.0b with ISO 11898-1) Key Pads User Defined Programmable HotKey x 7 Power Key x 1 Audio Internal 2 Watt Speaker (Mono) Internal Microphone External 3.

(800/850/900/1700/1900/2100 MHz) HSPA: HSUPA 5.6 Mbps, HSDPA 7.

25 BE905AF (Vehicle-mounted Computer) Cam2 (Video) Cam3 (Video) Cam4 (Video) AV-out IN IN 1GHz CPU, 512MB RAM, Android OS 7" TFT, Touch Panel, 3G/GPS module AV-out x 1, AV-in x 1, Video-in x 3 Built-in G-sensor and Light sensor External Display 1 External Display 2 Cam1 (Audio/Video) Hardware Specifications Processor TI 1GHz Single Core CPU (32-bit ARM Cortex-A8) OS Android 2.3 System Memory LPDDR MB Internal Storage emmc 4.41 I/F 8GB External Storage Support SD/SDHC Card Slot (Up to 32GB) External I/O Support ADC (Channel x 2, 10-bits Resolution) Support GPIO (GP Input x 2, GP Output x 2) Support RS232C (5-Wired UART) Support CAN BUS (2.0b with ISO ) Key Pads User Defined Programmable HotKey x 7 Power Key x 1 Audio Internal 2 Watt Speaker (Mono) Internal Microphone External 3.5mm Mono Headset Jack (MIC/Earphone) Display 7" TFT LCD 800x480 WVGA With LED Backlight Backlight Auto-adjustment by Light Sensor 4-wired Resistive Touch Panel Telecom (optional) Hexa-Band UMTS (800/850/900/1700/1900/2100 MHz) HSPA: HSUPA 5.6 Mbps, HSDPA 7.2 Mbps Quad-band GSM (850/900/1800/1900 MHz) GPRS Class 33, CS1-CS4 107 Kps EDGE Class 33, MCS1-MCS9 296 Kbps Audio/Video Interface AV-out x 1, AV-in (MIC in) x 1, Video-in x 3 Power Supply DC 11V~30V Internal Li-ion Battery of 2500 mah Operation Temperature -20 o C~ +70 o C Chassis Industrial grade, IP54 GPS (optional) 50-channel Receiver Engine Certification RoHS, Reach, WEEE, CE, FCC, E-MARK, UL USB USB 2.0 Host x 1, USB 2.0 Device x 1 Dimension 190mm (W) x 144mm (H) x 35mm (D) Weight 810g (w/ battery) 710g (w/o battery) ARM Cortex A8 512 SD 11V~30V USB 2.0 GPIO RS-232 CAN BUS 7-20 C~70 C IP54 ARM_3 June, 2015 VER: 02

26 ARM_4

BE905G (Vehicle-mounted Computer) Features 600MHz 32bit RISC ARM Cortex-A8 Linux With Debian Distribution

0b GPI x 3 Support Micro SD/SIM Card Built-in Accelerometer/Magnetometer External Microphone DC 9V~36V

With Debian Distribution and Qt Library System Memory DDR3L 512MB Internal Storage emmc 4GB 3G Dual-Band

11b/g/n Sensor Built-in Accelerometer Sensor Built-in Magnetometer Sensor Interface SD Card for Micro SD

It could be used for reading the speed of a vehicle's wheel rotation.) CAN bus 2.

5mm jack DB9 Debug Port Power Support DC 9V~36V Power Certification (pending) E-Mark Environment for

27 BE905G (Vehicle-mounted Computer) Features 600MHz 32bit RISC ARM Cortex-A8 Linux With Debian Distribution and Qt Library On Board 3G/Wi-Fi/GPS Module 1 x CAN bus 2.0b GPI x 3 Support Micro SD/SIM Card Built-in Accelerometer/Magnetometer External Microphone DC 9V~36V Power BT (Optional) Front Rear Hardware Specifications Processor 600Mhz 32bit RISC ARM Cortex-A8 OS Linux With Debian Distribution and Qt Library System Memory DDR3L 512MB Internal Storage emmc 4GB 3G Dual-Band UMTS/HSDPA 900/2100MHz GPS Stand-alone GPS QUALCOMM XTRA GPS mode Wi-Fi Support IEEE b/g/n Sensor Built-in Accelerometer Sensor Built-in Magnetometer Sensor Interface SD Card for Micro SD SIM Card for SIM Connectors and Cardholders GPI x 3 5V (GPI 1 is VSS [Vehicle Speed Sensor] port. It could be used for reading the speed of a vehicle's wheel rotation.) CAN bus 2.0b using DB9 connector External Microphone for 3.5mm jack DB9 Debug Port Power Support DC 9V~36V Power Certification (pending) E-Mark Environment for RoHS, Reach, WEEE Environmental Conditions Operation Temperature -20 o C ~ +70 o C Storage Temperature -30 o C ~ +80 o C Dimension 125.8mm (W) x 124mm (H) x 53mm (D) Weight 430g 512 AM335x CPU MicroSD Wi-Fi 9V~36V Debug Port CAN BUS -20 C~70 C ARM_5 June, 2015 VER. 01

Introduction Video Camera Support Option TREQ Platform Datasheet. January Rev. 2 A-317 Video Getting Started Guide 1 / 6

Introduction Video Camera Support Option TREQ -317 Platform Datasheet January 2018 Rev. 2 A-317 Video Getting Started Guide 1 / 6 Introduction The TREQ -317 is a rugged Automotive Tablet designed for in-cab