Energy Management Solution

Transcription

1 Energy Management Energy Management P 7-1 Power Meter Concentrator P 7-2 Smart Power Meter & Devices P Software Utility P 7-6 Power Meter Concentrator P 7-7 Three-phase Smart Power Meter PM-3133-RCT/-MTCP/-CPS P 7-8 PM-3133/-MTCP/-CPS P 7-10 PM-3033/-MTCP/-CPS P 7-12 Single-phase Smart Power Meter P 7-14 Multi-circuit Smart Power Meter P channel True RMS Input Module P 7-21 Industrial Multi-power-meter Display P 7-23 Energy Management s - EM Brochure True RMS Input Module TouchPAD - VPD series Smart Power Meter Smart Power Meter Concentrator Power Data Management Software Or refer to

2 ICPDAS Product Catalog 1. Energy Management System Architecture t For the resources of the earth are getting depleted faster in recent years, countries around the world and all walks of life all set off a wave of energy saving and carbon reduction in order to avoid the waste of resources and pursue living a sustainable life to extend earth's resources. Under the trend of energy saving and carbon reduction, power monitoring gradually becomes an important project for maximizing energy efficiency by power monitoring always contributing to significant energy savings no mater on the individual, corporate or national level. In order to achieve more efficient use of energy and reduce resources consumption, ICP DAS provides an innovative total solution in energy saving by connecting PMC/PMD (Power Meter Concentrator) to the Power Meters via RS-485 or Ethernet interface, it can measure and monitor the power consumption of the devices, machines, lighting, air conditioning or other electricity equipments. In addition, PMC/PMD also provides power demand management and alarm notification functions. With the integration of ICP DAS I/O modules and the standard Modbus I/O devices, it can perform logic control or load shedding of the devices based on the power demand in real time. PMC/PMD also supports Modbus TCP/RTU protocol for seamless integration with SCADA. So that the administrator can monitor the status of power consumption of each device and perform statistics and analysis of the power information, thus improving the overall efficiency in electricity consumption to save costs on utility bills. This innovative total solution for energy saving includes: front-end Smart Power Meter, Power Meter Concentrator, back-end software tool for database import operation (PMC Data Server) and InduSoft SCADA software. In addition to hardware devices, ICP DAS also provides total solution so that the user could easily view power data by their mobile phones or PC, the administrator could set up the system quickly and the data can be recorded in real time for energy consumption inquiry to achieve effective energy saving. During the early stage, if the scale of the application is small, the user could simply use Smart Power Meter and PMC/PMD to set up a simple power monitoring system, once the scale of the application is expanded, the user could get the back-end software tool involved and build an easy-to-expand power monitoring system via blocks stacked structure. By this way, the system will be highly flexible and could be implemented in phases to meet various requirements. 7-1 ICP DAS CO., LTD. Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems Vol. FPC

3 2. Power Meter Concentrator PMC/PMD Features: PAC Products Panel Products PMC PMD No extra software tool, using browsers to perform system operations Featuring web-based HMI for easy operations, the user could connect to PMC/PMD webpage via browsers to view the power data, set up system parameters, manage power demand and perform logic editing function for alarm notification. Built-in Micro SD card for power data logging The PMC/PMD features a built-in Micro SD card. After the PMC/ PMD retrieving the power data from the power meter, the system will save the power data in CSV format in the Micro SD card and regularly send back the data files to the backend management center for data analysis and statistics. Display real-time or historical power data trend In addition to display power data of the power meter in text form, the power data can also be displayed in real-time and historical trend chart for user to easily identify the variation of the electricity usage of the devices. DAQ Card Remote I/O Module and Unit Industrial Wireless Motion Automation Energy Management FTP Server/Client for data file management and file recovery mechanism supported The built-in FTP Client function of PMC/PMD allows regular transmission of the power data logger files saved in the Micro SD card of PMC/PMD to the backend management center for data analysis and statistics. The PMC/PMD offers a complete data file recovery mechanism so that when experiencing network disconnection, the data log files will be recovered after the network is resumed to ensure the system operates properly. With the FTP Server of PMC/PMD, the user could also use FTP Client utility to retrieve the power data files saved in PMC/PMD from the PC side easily. Accessories Website: service@icpdas.com Vol. FPC

4 ICPDAS Product Catalog Built-in IF-THEN-ELSE logic engine for thought-out power demand management and auto alarm notification when unusual events occurs PMC/PMD is equipped with IF-THEN-ELSE logic engine. The user could complete the control logic via web page and download the logic rules to the PMC/PMD. The logic engine will loop execute the rules in order. By editing the IF- THEN-ELSE logic rules, the user could include the following information in the IF condition, such as: fail to connect to power meter, FTP upload failed, insufficient disk space, power demand management, abnormal power data, etc. In addition, the Schedule setting and channel values of I/O modules that are connected to the PMC/PMD can be also included in the IF condition. When the evaluation of the IF condition is matched, the corresponding Action will be executed (such as: /SMS alarm message sending or AO/DO channel value of the I/O modules setting). By this way, the user could quickly implement applications for power demand management, electricity control of the devices and alarm notification sending. Provide Schedule function PMC/PMD provides Schedule function that allows to edit logic for applications that requires Schedule function. The Calendar interface allows to easily set up the schedule for weekdays or weekends so that the user could schedule the operations for the devices as required for power saving. Provide historical power data statistics report PMC/PMD provides historical data report inquiry and display function, the easy-to-read daily and monthly report of the historical power data would help to understand current electricity usage of the devices. Modbus TCP/RTU for seamless integration with SCADA The PMC/PMD supports Modbus TCP/RTU Slave protocol to connect to SCADA software or HMI devices in control center so that it could perform real-time monitoring and control of the electricity usage for the devices. Therefore, the regulation of the system will be more flexible. Provide Timer Function Timer function provides Timeout/Not Timeout status for condition evaluations. With the timer function, the users are able to edit logic that requires timing approach. In addition, the timer function can be reset/started in real time that increases flexibility when performing logic control. 7-3 ICP DAS CO., LTD. Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems Vol. FPC

5 Support a variety of wide-range I/O modules to achieve power control and load shedding of the devices According to the requirements of the application and based on the devices connected, the PMC/PMD is able to connect to M-7000 I/O modules, standard Modbus TCP/RTU Slave modules or DO Relay channel of the PM Series power meter for real time I/ O control operation of the devices, the abundant selections enable maximum flexibility for system set up and power saving. Industrial PAC Products Panel Products Remote I/O Module and Unit On-Site Power data viewing and Power Meter setting PMD (Power Meter Concentrator with Display) series is equipped with TFT LCD (with Touch Panel). It provides an easy way for viewing the power data and set up the Power Meter parameters on sites. Support SNMP Function In addition to Modbus protocol, PMC/PMD also supports SNMP function that allows seamless integration with IT Management software. The users could integrate PMC/PMD with the existing management system and collect the power data of each device by SNMP function easily. Provide Power Usage Effectiveness (PUE) calculation operation Power usage effectiveness (PUE) is a measure of how efficiently a computer data center uses energy; specifically, how much energy is used by the computing equipment (in contrast to cooling and other overhead). PUE is the ratio of total amount of energy used by a computer data center facility to the energy delivered to computing equipment. The PUE will be greater than 1. The larger the PUE number the less efficient your utilization is. PMC/PMD provides the PUE calculation operation and also display the PUE data in two modes (Real-Time and History) through Web page. Wireless Motion Automation Energy Management DAQ Card Accessories Website: service@icpdas.com Vol. FPC

6 ICPDAS Product Catalog 3. Smart Power Meter & Devices PM Smart Power Meter Features Provide multi-phase multi-circuit power measurement function PM-3033: 1 Three Phase Circuit PM-3133: 1 Three Phase Circuit PM-3033 PM-3112: 2 Single Phase Circuits PM-3114: 4 Single Phase Circuits PM-4324: 8 Three Phase Circuits or 24 Single Phase Circuits RTU PM-3112 TCP Support multiple communication interfaces: RS-485 PM-3133 Ethernet CANopen PM-3114 Support multiple standard communication protocols: Modbus RTU Modbus TCP CANopen PM-4324 Support 2 built-in Power Relay Output With CT W Accuracy Better than 0.5% (PF=1) Clip on CT for easy installation Compact size, easy to install, suitable for a variety of industrial applications True RMS Input Module Features Industrial Multi-power-meter Display M-7017RMS 7 Series DCON RTU 4.3 Series TPD-703-PM VPD-173-PM PM TCP TPD-433-PM VPD-143N-PM RTU 8-channel True RMS Input ±0.15% Factory Calibrated Accuracy RMS Input Range: +150 mvrms ~ +10 Vrms For Standard Operation with Frequencies: 45 Hz ~ 10 KHz Individual Channel Configurable 4 kv ESD Protection ±35 VDC Overvoltage Protection 2500 VDC Intra-module Isolation Built-in HMI for Infermation Display of Power Meters IP40/IP60 Ingress Protection for Front Panel Support Modbus TCP/RTU Protocols Support Max. of 8 Single-phase/3-phase Power Meters (PM-3xxx series) or One PM-4324 Support Max. of 4 Modbus/TCP Connections for SCADA Software Support Phase Sequence Detection Support Fine Tune of Voltage and Current Ratio 7-5 ICP DAS CO., LTD. Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems Vol. FPC

7 4. Software Utility Remote I/O Module and Unit Panel Products PAC Products PMC Data Server The PMC Data Server is a database utility designed for connecting to the PMC/PMD concentrators. When PMC/PMD Data Server is connected to these PMC/PMDs by Ethernet, the PMC/PMDs will send the power data logger files to the PMC Data Server at scheduled time, and these power data will be transformed to MS Access/MS SQL/MySQL database format for easy data review or inquiry. During the whole process of system development, no programming is required. It takes only a few settings for users to quickly retrieve and view the power data of the devices based on database system and furthermore, enables further process of the data for statistics and analysis. Power Meter Utility Power Meter Utility has to be installed on PC and it enables to retrieve and display the power measurement values that measured by power meter via COM Port or Ethernet. The users will be able to read the power measurement values and to perform parameter settings of the meter. When connecting with ICP DAS power meters by RS-485 communication protocol interface, it requires to convert RS-232 or USB on PC to RS-485 communication interface, converter modules (such as ICP DAS I-7561, I-7520) might be required; When connecting with ICP DAS power meters by Ethernet interface, it must setup the correct IP address to retrieve the power measurement values easily. Features: By Modbus RTU or Modbus TCP protocol, it enables to connect with ICP DAS Power Meters and data retrieving. Real time monitor power measurement values of the meter. Real time setting up parameters of the meter. Restore the parameters of the meter to default settings. Support Data Log function DAQ Card Industrial Wireless Motion Automation Accessories Energy Management Website: service@icpdas.com Vol. FPC

8 ICPDAS Product Catalog Power Meter Concentrator Features: No extra software tool is required, using browsers to operate system Support at most 24 ICP DAS Modbus Power Meter and 8 Modbus I/O modules (COM2, COM3 and LAN interface can connect to Max. 16 power meters.) Display real-time or historical power data (in data table or chart form) Provide power data statistics report (Daily and Monthly report) Data file auto send-back & recovery when network is resumed after disconnection Built-in IF-THEN-ELSE logic engine for power demand management PMC-5151 Provide alarm message notification function via or SMS (for SMS message sending, GTM-203M-3GWA is required) Adjust device operations by its power status via Modbus I/O modules Provide Schedule function for operations of I/O modules (devices) Support Modbus TCP/RTU Slave protocol for seamless integration with SCADA Support Standard SNMP Protocol Introduction: The PMC-5151 is a web-based intelligent Power Meter Concentrator developed by ICP DAS. It offers webpage interface, and features various functions such as: power data collection, logic control, power demand management, data logger and alarm notification functions. PMC-5151 allows connections to ICP DAS Smart Power Meters via RS-485 or Ethernet interface to read the power data of the devices measured by the power meters; and then real-time record the power values in the data logger file. It also provides data logger file auto send-back function; together with PMC Data Server software or SCADA software, it allows collection and analysis of the power data. Power Meter Concentrator With Display Features: Provide 7"/10.4" Touch Panel for On-Site operations Provide remote connection using browsers to login for operations Support up to 24 ICP DAS Modbus Power Meter and 8 Modbus I/O (COM2, COM3 and LAN interface can connect to Max. 16 power meters.) Provide real-time/historical power data statistics report Provide microsd card to store power data information Data file auto send-back & recovery when disconnected network is resumed Built-in IF-THEN-ELSE logic engine for power demand management Provide alarm message notification function via Adjust device operations by its power status via Modbus I/O modules 10.4 TFT LCD PMD TFT LCD PMD-2201 Provide Schedule function for operations of I/O modules (devices) Support Modbus TCP/RTU Slave protocol for integration with SCADA Support SNMP Protocol Introduction: The PMD is a web-based intelligent Power Meter Concentrator with Display. It offers webpage interface, and features various functions such as: power data collection, logic control, power demand management, data logger, local display/web page data display and alarm notification functions. PMD allows connections to ICP DAS Smart Power Meters via RS-485 or Ethernet interface to read and record the power data of the devices measured by the power meters. PMD also provides data logger file auto send-back function; together with PMC Data Server software or SCADA software, it allows collection and analysis of the power data. PMD is equipped with 7"/10.4" TFT LCD (with Touch Panel). It provides an easy way for viewing the power data and setting the system parameters on sites. In addition, it can also access built-in Web Server on the PMD via browsers for the above operations. PMD also offers Modbus TCP/RTU Slave function that allows seamless integration with most SCADA software 7-7 ICP DAS CO., LTD. Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems Vol. FPC

9 Three-phase Smart Power Meter PM-3133-RCT/-MTCP/-CPS Introduction: Specifications: Features: True RMS Power Measurements Energy Analysis for 3P4W, 3P3W, 1P3W, 1P2W Current Measurements Up to 2000 A Voltage Measurements Up to 500 V Rogowski Coil Soft CT for Easy Installation W Accuracy Better than 1% (PF=1; Input Current >50A) Supports RS-485, Ethernet (PoE) or CANopen Interface Supports Modbus RTU, Modbus TCP or CANopen Protocol Supports 2 Power Relay Output (Form A) Total Harmonic Distortion (THD) ICP DAS brings the most powerful, cost-effective, advanced Smart Power Meters PM-3133-RCT that gives you access to real-time electric usage for three-phase power measurement. With its high accuracy (<1%, PF=1; Input Current >50A), this series can be used to both low voltage primary side and medium/high voltage secondary side and enables the users to obtain reliable and accurate energy consumption readings from the monitored equipments in real time under operation. These compact size and cost-effective power meters monitoring equipment with Rogowski Coil CT is "rope-style" Current Transformer which delivers "Easy Installation" features for large window size (55 ~ 105mm) and mechanical fl exibility for tight space. It operates over a wide range of input voltages 10 ~ 500 VAC which allows universal compatibility. Also, with 2 channels relay outputs, it can be linked with sirens or lightings for alarm messages. It also supports Modbus RTU, Modbus TCP or CANopen protocols for easy integration. Models PM-3133-RCT PM-3133-RCT-MTCP PM-3133-RCT-CPS AC Power Measurement Wiring 3P4W-3CT, 3P3W-2CT, 3P3W-3CT, 1P2W-1CT, 1P3W-2CT Measurement Voltage 10 ~ 500 V Measurement Current CTØ55 mm (500 A), CTØ80 mm (1000 A), CTØ105 mm (2000 A) Measurement Frequency 50/60 Hz W Accuracy Better than 1% (PF=1; Input Current >50 A) Power Parameter Measurement True RMS voltage (Vrms), True RMS current (Irms), Active Power (kw), Active Energy (kwh), Apparent Power (kva), Apparent Energy (kvah), Reactive Power (kvar), Reactive Energy (kvarh), Power Factor (PF), Frequency, THD 1 Second Data Update Rate Interface RS-485 Ethernet (PoE) CANopen Protocol Modbus-RTU Modbus TCP CANopen Baud rate 9600,19200 (default), 38400, 125 k (default), 250 k, 500 k, 1 M; ; DIP Switch Selectable DIP Switch Selectable Data format N,8,1 (default); N,8,2; E,8,1; E,8,2; O,8,1; O,8,2 - - Isolation 3000 VDC VDC Alarm Output Power Relay Form A (Normal Open) x 2; Relay Contact Voltage Range: VAC (47 ~ 63Hz), 5 30 VDC Power Power Input +12 ~ 48 VDC +12 ~ 48 VDC or PoE +12 ~ 48 VDC Power Consumption Environment Temperature Ambient Relative Humidity 2 W Operating Temperature: -20 ~ +70 C / Storage Temperature: -25 ~ +80 C 10% ~ 90% RH, Non-condensing PAC Products Panel Products Remote I/O Module and Unit Industrial Wireless Motion Automation Energy Management DAQ Card Accessories Website: service@icpdas.com Vol. FPC

10 ICPDAS Product Catalog Installation A B C D Rogowski Coil Soft CT Installation Dimensions (Units: mm): Models A B PM-3133-RCT500P PM-3133-RCT1000P PM-3133-RCT2000P Ordering Information: RS-485 Interface PM-3133-RCT500P PM-3133-RCT1000P PM-3133-RCT2000P Modbus RTU, 3-phase power meter, 500A Rogowski Coil CT Modbus RTU, 3-phase power meter, 1000A Rogowski Coil CT Modbus RTU, 3-phase power meter, 2000A Rogowski Coil CT Ethernet Interface PM-3133-RCT500P-MTCP PM-3133-RCT1000P-MTCP PM-3133-RCT2000P-MTCP CANopen Interface PM-3133-RCT500P-CPS PM-3133-RCT1000P-CPS PM-3133-RCT2000P-CPS Available soon Modbus TCP, 3-phase power meter, 500A Rogowski Coil CT Modbus TCP, 3-phase power meter, 1000A Rogowski Coil CT Modbus TCP, 3-phase power meter, 2000A Rogowski Coil CT Available soon CANopen, 3-phase power meter, 500A Rogowski Coil CT CANopen, 3-phase power meter, 1000A Rogowski Coil CT CANopen, 3-phase power meter, 2000A Rogowski Coil CT 7-9 ICP DAS CO., LTD. Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems Vol. FPC

11 Three-phase Smart Power Meter Introduction: Specifications: PM-3133/-MTCP/-CPS Models PM-3133 PM-3133-MTCP PM-3133-CPS AC Power Measurement Wiring 3P4W-3CT, 3P3W-2CT, 3P3W-3CT, 1P2W-1CT, 1P3W-2CT Measurement Voltage 10 ~ 500 V Measurement Current CTØ10 mm (60 A); CTØ16 mm (100 A); CTØ24 mm (200 A); CTØ36 mm (300 A); CTØ36 mm (400 A) Measurement Frequency 50/60 Hz W Accuracy Better than 0.5% (PF=1) Power Parameter Measurement Data Update Rate True RMS voltage (Vrms), True RMS current (Irms), Active Power (kw), Active Energy (kwh), Apparent Power (kva), Apparent Energy (kvah), Reactive Power (kvar), Reactive Energy (kvarh), Power Factor (PF), Frequency 1 Second Protocol Modbus-RTU ,19200 (default), 38400, Baud rate RS ; DIP Switch Selectable - - Data format N,8,1 - - Isolation 3000 VDC - - Ethernet (PoE) Protocol - Modbus TCP - Protocol - - CANopen CANopen Baud rate k (default), 250 k, 500 k, 1 M; DIP Switch Selectable Isolation VDC Alarm Output Power Relay Form A (Normal Open) 2; Relay Contact Voltage Range: VAC (47 ~ 63Hz), 5 30 VDC Power Power Input +12 ~ 48 VDC +12 ~ 48 VDC or PoE +12 ~ 48 VDC Power Consumption Environment Temperature Ambient Relative Humidity Features: True RMS Power Measurements Energy Analysis for 3P4W, 3P3W, 1P3W, 1P2W Current Measurements Up to 400 A with Different CT Ratio Voltage Measurements Up to 500 V Clip-on CT for Easy Installation W Accuracy Better than 0.5% (PF=1) Supports RS-485, Ethernet (PoE) or CANopen Interface Supports Modbus RTU, Modbus TCP or CANopen Protocol Supports 2 Power Relay Output (Form A) Total Harmonic Distortion (THD) IEC and EN ICP DAS brings the most powerful, cost-effective, advanced Smart Power Meters PM-3133 series that gives you access to real-time electric usage for three-phase power measurement. With its high accuracy (<0.5%, PF=1 ), the PM-3133 series can be applied to both low voltage primary side and/or medium/high voltage secondary side and enables the users to obtain reliable and accurate energy consumption readings from the monitored equipments in real time under operation. These compact size and cost-effective power meters are equipped with revolutionary wired clip-on CT (various types, support input current up to 400 A). It operates over a wide input voltages range 10 ~ 500 VAC which allows worldwide compatibility. And with 2 channels relay outputs, it can be linked with sirens or lightings for alarm messages. It also supports Modbus RTU, Modbus TCP or CANopen protocols for easy integration. You can use CT's that you currently own with PM-3133P (without CTs) Power Meter. The CT inputs of the PM-3133P can handle a maximum of 333mV of AC current. 2 W Operating Temperature: -20 ~ +70 C / Storage Temperature: -25 ~ +80 C 10% ~ 90% RH, Non-condensing PAC Products Panel Products Remote I/O Module and Unit Industrial Wireless Motion Automation Energy Management DAQ Card Accessories Website: service@icpdas.com Vol. FPC

12 ICPDAS Product Catalog Appearance: LED indicators RUN Power DO0 DO1 RS-485 Interface CANopen Interface Dimensions (Units: mm): Ethernet Interface Left View Front View Right View Rear View Top View Bottom View Selection Guide: PM-3133 Ordering Information: RS-485 Interface - x x x P PM-3133P Modbus RTU, 3-phase power meter (Compatible with CTs from 50 to 1000 A/333 mv output) PM Modbus RTU, 3-phase power meter (60 A) PM Modbus RTU, 3-phase power meter (100 A) PM Modbus RTU, 3-phase power meter (200 A) PM P Modbus RTU, 3-phase power meter (300 A) PM P Modbus RTU, 3-phase power meter (400 A) - CT size (measurement) Current Transformers 100: CTΦ10 mm, 60 A Max. (Secondary voltage 333mV) 160: CTΦ16 mm, 100 A Max. 240: CTΦ24 mm, 200 A Max. 360P: CTΦ36 mm, 300 A Max. 400P: CTΦ36 mm, 400 A Max. x x x : RS-485 CPS: CANopen MTCP: Modbus TCP Ethernet Interface PM MTCP Modbus TCP, 3-phase power meter (60 A) PM MTCP Modbus TCP, 3-phase power meter (100 A) PM MTCP Modbus TCP, 3-phase power meter (200 A) PM P-MTCP Modbus TCP, 3-phase power meter (300 A) PM P-MTCP Modbus TCP, 3-phase power meter (400 A) CANopen Interface PM CPS CANopen, 3-phase power meter (60 A) PM CPS CANopen, 3-phase power meter (100 A) PM CPS CANopen, 3-phase power meter (200 A) PM P-CPS CANopen, 3-phase power meter (300 A) PM P-CPS CANopen, 3-phase power meter (400 A) 7-11 ICP DAS CO., LTD. Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems Vol. FPC

13 Three-phase Smart Power Meter Introduction: Specifications: PM-3033/-MTCP/-CPS Models PM-3033 PM-3033-MTCP PM-3033-CPS AC Power Measurement Wiring 3P4W-3CT, 3P3W-2CT, 3P3W-3CT, 1P2W-1CT, 1P3W-2CT Measurement Voltage 10 ~ 500 V Measurement Current 1A or 5A Measurement Frequency 50/60 Hz W Accuracy Better than 0.5% (PF=1) True RMS voltage (Vrms), True RMS current (Irms), Active Power (kw), Active Energy (kwh), Power Parameter Measurement Apparent Power (kva), Apparent Energy (kvah), Reactive Power (kvar), Reactive Energy (kvarh), Power Factor (PF), Frequency Data Update Rate 1 Second Protocol Modbus-RTU - - RS-485 Baud rate 9600,19200 (default), 38400, ; DIP Switch Selectable - - Data format N,8,1 (default); N,8,2; E,8,1; E,8,2; O,8,1; O,8,2 - - Isolation 3000 VDC - - Ethernet (PoE) Protocol - Modbus TCP - Protocol - - CANopen CANopen Baud rate k (default), 250 k, 500 k, 1 M; DIP Switch Selectable Isolation VDC Power Power Input +12 ~ 48 VDC +12 ~ 48 VDC or PoE +12 ~ 48 VDC Power Consumption Environment Temperature Ambient Relative Humidity Features: True RMS Power Measurements Energy Analysis for 3P4W, 3P3W, 1P3W, 1P2W Direct input of secondary side 1A/5A CT Voltage Measurements Up to 500 V W Accuracy Better than 0.5% (PF=1) Supports RS-485, Ethernet (PoE) or CANopen Interface Supports Modbus RTU/Modbus TCP or CANopen Protocol Total Harmonic Distortion (THD) IEC and EN Total Harmonic Distortion (THD) IEC and EN ICP DAS brings the most powerful, cost-effective, advanced Smart Power Meters PM-3033 series that gives you access to real-time electric usage for three-phase power measurement. With its high accuracy (<0.5%, PF=1 ), the PM-3033 series can be applied to both low voltage primary side and/or medium/high voltage secondary side and enables the users to obtain reliable and accurate energy consumption readings from the monitored equipments in real time under operation. Direct input from secondary side 1A/5A type CTs. Dedicated CTs are no longer needed, which lowers the cost of implementation. It operates over a wide input voltages range 10 ~ 500 VAC which allows worldwide compatibility. It also supports Modbus RTU, Modbus TCP or CANopen protocols for easy integration. 2 W Operating Temperature: -20 ~ +70 C / Storage Temperature: -25 ~ +80 C 10% ~ 90% RH, Non-condensing PAC Products Panel Products Remote I/O Module and Unit Industrial Wireless Motion Automation Energy Management DAQ Card Accessories Website: service@icpdas.com Vol. FPC

14 ICPDAS Product Catalog CT Installation and Wiring: Aux. Power Input +12 ~ 48 VDC LED indicators Direct input of secondary side 1A/5A CT AC Measurement 10 ~ 500 V Dimensions (Units: mm): Left View Front View Right View Rear View Top View Bottom View Selection Guide: PM-3033 Ordering Information: RS-485 Interface PM x xx : RS-485 CPS: CANopen MTCP: Modbus TCP Modbus RTU, 3-phase power meter (1A/5A CT Input type) Ethernet Interface PM-3033-MTCP CANopen Interface PM-3033-CPS Modbus TCP, 3-phase power meter (1A/5A CT Input type) CANopen, 3-phase power meter (1A/5A CT Input type) 7-13 ICP DAS CO., LTD. Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems Vol. FPC

15 Single-phase Smart Power Meter PM-3112 Introduction: Specifications: PM-3114 PM-3112/-MTCP/-CPS PM-3114/-MTCP/-CPS Models PM-3112 PM-3114 PM-3112-MTCP PM-3114-MTCP PM-3112-CPS PM-3114-CPS AC Power Measurement Wiring 1P2W-2CT 1P4W-4CT 1P2W-2CT 1P4W-4CT 1P2W-2CT 1P4W-4CT Input Voltage 10 ~ 300 V Input Current CTØ10 mm (60 A); CTØ16 mm (100 A); CTØ24 mm (200 A) Input Frequency 50/60 Hz W Accuracy Better than 0.5% (PF=1) Starting Current >0.03A ( 60A ), >0.05A (100A ), >0.09A( 200A ) Power Parameter Measurement Data Update Rate Features: True RMS Power Measurements Energy Analysis for 1P2W, 1P4W Current Measurements Up to 200 A with Different CT Ratio Voltage Measurements Up to 300 V Clip-on CT for Easy Installation W Accuracy Better than 0.5% (PF=1) Supports RS-485, Ethernet or CANopen Interface Supports Modbus RTU, Modbus TCP or CANopen Protocol Supports 2 Power Relay Output (Form A) IEC and EN ICP DAS brings the most powerful, cost-effective, advanced Smart Power Meters PM-3000 series that gives you access to real-time electric usage for single-phase power measurement. With its high accuracy (< 0.5%, PF=1 ), the PM-3000 series can be applied to both low voltage primary side and/or medium/high voltage secondary side and enables the users to obtain reliable and accurate energy consumption readings from the monitored equipments in real time under operation. These compact size and cost-effective power meters are equipped with revolutionary wired clip-on CT (various types, support input current up to 200 A). It operates over a wide input voltages range 10 ~ 300 VAC which allows worldwide compatibility. And with 2 channels relay outputs, it can be linked with sirens or lightings for alarm messages. It also supports Modbus RTU, Modbus TCP or CANopen protocols for easy integration. True RMS voltage (Vrms), True RMS current (Irms), Active Power (kw), Active Energy (kwh), Apparent Power (kva), Apparent Energy (kvah), Reactive Power (kvar), Reactive Energy (kvarh), Power Factor (PF), Frequency 1 Second Protocol Modbus-RTU ,19200 (default), 38400, Baud rate RS ; DIP Switch Selectable - - Data format N,8,1 - - Isolation 3000 VDC - - Ethernet (PoE) Protocol - Modbus TCP - Protocol - - CANopen CANopen 125 k (default), 250 k, 500 k, 1 M; Baud rate - - DIP Switch Selectable Alarm Output Power Relay Form A (Normal Open) 2; Relay Contact Voltage Range: VAC (47 ~ 63 Hz), 5 30 VDC Power Input Range +12 ~ 48 VDC +12 ~ 48 VDC +12 ~ 48 VDC Power Consumption 2 W Environment Temperature Operating Temperature: -20 ~ +70 C / Storage Temperature: -25 ~ +80 C Ambient Relative Humidity 10% ~ 90% RH, Non-condensing PAC Products Panel Products Remote I/O Module and Unit Industrial Wireless Motion Automation Energy Management DAQ Card Accessories Website: service@icpdas.com Vol. FPC

16 ICPDAS Product Catalog Appearance: 1P4W-4CT LED indicators RUN Power DO0 DO1 RS-485 Interface 1P2W-2CT 1P4W-2CT CANopen Interface Dimensions (Units: mm): Ethernet Interface Left View Selection Guide: PM-311 Front View Right View Rear View x - x x x - x x 33 Top View Bottom View x Ordering Information: Channel 2: 2 Circuits 4: 4 Circuits RS-485 Interface PM Modbus RTU, 2 single-phase circuits Power Meter with 2 CTs (60 A) PM Modbus RTU, 2 single-phase circuits Power Meter with 2 CTs (100 A) PM Modbus RTU, 2 single-phase circuits Power Meter with 2 CTs (200 A) Ethernet Interface PM MTCP Modbus TCP, 2 single-phase circuits Power Meter with 2 CTs (60 A) PM MTCP Modbus TCP, 2 single-phase circuits Power Meter with 2 CTs (100 A) PM MTCP Modbus TCP, 2 single-phase circuits Power Meter with 2 CTs (200 A) CANopen Interface PM CPS CANOpen, 2 single-phase circuits Power Meter with 2 CTs (60 A) PM CPS CANOpen, 2 single-phase circuits Power Meter with 2 CTs (100 A) PM CPS CANOpen, 2 single-phase circuits Power Meter with 2 CTs (200 A) CT size (measurement) 100: CTΦ10 mm (0 ~ 60 A) 160: CTΦ16 mm (0 ~ 100 A) 240: CTΦ24 mm (0 ~ 200 A) RS-485 Interface PM PM PM Ethernet Interface PM MTCP PM MTCP PM MTCP CANopen Interface PM CPS PM CPS PM CPS : RS-485 CPS: CANopen MTCP: Modbus TCP Modbus RTU, 4 single-phase circuits power meter (60 A) Modbus RTU, 4 single-phase circuits power meter (100 A) Modbus RTU, 4 single-phase circuits power meter (200 A) Modbus TCP, 4 single-phase circuits power meter (60 A) Modbus TCP, 4 single-phase circuits power meter (100 A) Modbus TCP, 4 single-phase circuits power meter (200 A) CANOpen, 4 single-phase circuits power meter (60 A) CANOpen, 4 single-phase circuits power meter (100 A) CANOpen, 4 single-phase circuits power meter (200 A) 7-15 ICP DAS CO., LTD. Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems Vol. FPC

17 Multi-circuit Smart Power Meter Introduction: PM-4324/-MTCP/-CPS PM-4324A/-MTCP/-CPS Features: 8 Three Phase Circuits or 24 Single Phase Circuits True RMS Power Measurements Energy Analysis for 3P4W, 3P3W, 1P3W, 1P2W 2 Independent main circuit inputs for PM-4324A series Current Measurements Up to 400 A with Different CT Ratio Voltage Measurements Up to 500 V Easy install with split core CT W Accuracy Better than 0.5% (PF=1) Support RS-485, Ethernet or CAN bus Interface Support 2 Power Relay Output (Form A) Total Harmonic Distortion (THD) The PM-4324 series multi-circuit power meter monitors up to 8 three-phase circuits or 24 single-phase circuits, or any combination of single or three-phase circuits. The PM-4324 series can measure up to 24 currents via external Current Transformers (CTs). This flexibility makes the PM-4324 series perfect for multi-tenant facilities such as residential projects, office buildings and shopping malls. This compact instrument is designed to easily fit into existing panelboards or be flush mounted nearby, thus eliminating the need for expensive retrofit projects or for allocating extra space for the device. The PM-4324A is the same model as the PM-4324, except for the AC Measurement. The PM-4324A has 2 separate main circuit inputs that can use in the different power system. Specifications: Models PM-4324/PM-4324A PM-4324-MTCP/ PM-4324A-MTCP PM-4324-CPS/ PM-4324A-CPS AC Power Measurement Wiring 3P4W-3CT, 3P3W-2CT, 3P3W-3CT, 1P2W-1CT, 1P3W-2CT Measurement Voltage 10 ~ 500 V Measurement Current CTØ10 mm (60 A); CTØ16 mm (100 A); CTØ24 mm (200 A); CTØ36 mm (300 A); CTØ36 mm (400 A) Measurement Frequency 50/60 Hz W Accuracy Better than 0.5% (PF=1) Power Parameter Measurement Data Update Rate True RMS voltage (Vrms), True RMS current (Irms), Active Power (kw), Active Energy (kwh), Apparent Power (kva), Apparent Energy (kvah),reactive Power (kvar), Reactive Energy (kvarh), Power Factor (PF), Frequency 1 Second Interface RS-485 Ethernet CAN Bus Protocol Modbus-RTU Modbus TCP CANopen Baud rate 9600,19200 (default), 38400, 125 k (default), 250 k, 500 k, 1 M; ; DIP Switch Selectable DIP Switch Selectable Data format N,8,1; N,8,2; E,8,1; E,8,2; O,8,1; O,8,2 - - Isolation 3000 VDC VDC Alarm Output Power Relay Form A (Normal Open) x 2; Relay Contact Voltage Range: VAC (47 ~ 63 Hz), 5 30 VDC Power Input Range +85 ~ +264 VAC Power Consumption 6 W Mechanical Dimensions / Casing 237 mm x 52 mm x 134 mm (W x L x H) / Plastic Module Installation DIN-Rail Mounting; Wall mounting Environment Temperature Operating Temperature: -20 ~ +70 C / Storage Temperature: -25 ~ +80 C Ambient Relative Humidity 10% ~ 90% RH, Non-condensing PAC Products Panel Products Remote I/O Module and Unit Industrial Wireless Motion Automation Energy Management DAQ Card Accessories Website: service@icpdas.com Vol. FPC

18 ICPDAS Product Catalog Appearance: PM-4324A V2 reference voltage V1 reference voltage Aux. Power Input 85 ~ 264 VAC Up to 24 currents via external Current Transformers (CTs) RS-485 AC Measurement 10 ~ 500 V (A, B, C, N) V1 reference voltage PM CH Relay output Node ID Baud rate Selection Guide: PM independent main circuit inputs A x xxp x xx CT size (measurement) 100P: CTΦ10 mm, 60 A Max. 160P: CTΦ16 mm, 100 A Max. 240P: CTΦ24 mm, 200 A Max. 360P: CTΦ36 mm, 300 A Max. 400P: CTΦ36 mm, 400 A Max. - Current Transformers (Secondary voltage 333mV) : RS-485 CPS: CANopen MTCP: Modbus TCP Ordering Information: RS-485 Interface PM-4324P Modbus RTU, Multi-Circuit Power Meter (Can be directly input from the secondary side of 333mV CT) PM P Modbus RTU, Multi-Circuit Power Meter (60 A) PM-4324A-100P Modbus RTU, Multi-Circuit Power Meter (60 A) PM P Modbus RTU, Multi-Circuit Power Meter (100 A) PM-4324A-160P Modbus RTU, Multi-Circuit Power Meter (100 A) PM P Modbus RTU, Multi-Circuit Power Meter (200 A) PM-4324A-240P Modbus RTU, Multi-Circuit Power Meter (200 A) PM P Modbus RTU, Multi-Circuit Power Meter (300 A) PM-4324A-360P Modbus RTU, Multi-Circuit Power Meter (300 A) PM P Modbus RTU, Multi-Circuit Power Meter (400 A) PM-4324A-400P Modbus RTU, Multi-Circuit Power Meter (400 A) Ethernet Interface PM P-MTCP Modbus TCP, Multi-Circuit Power Meter (60 A) PM-4324A-100P-MTCP Modbus TCP, Multi-Circuit Power Meter (60 A) PM P-MTCP Modbus TCP, Multi-Circuit Power Meter (100 A) PM-4324A-160P-MTCP Modbus TCP, Multi-Circuit Power Meter (100 A) PM P-MTCP Modbus TCP, Multi-Circuit Power Meter (200 A) PM-4324A-240P-MTCP Modbus TCP, Multi-Circuit Power Meter (200 A) PM P-MTCP Modbus TCP, Multi-Circuit Power Meter (300 A) PM-4324A-360P-MTCP Modbus TCP, Multi-Circuit Power Meter (300 A) PM P-MTCP Modbus TCP, Multi-Circuit Power Meter (400 A) PM-4324A-400P-MTCP Modbus TCP, Multi-Circuit Power Meter (400 A) CANopen Interface PM P-CPS CANOpen, Multi-Circuit Power Meter (60 A) PM-4324A-100P-CPS CANOpen, Multi-Circuit Power Meter (60 A) PM P-CPS CANOpen, Multi-Circuit Power Meter (100 A) PM-4324A-160P-CPS CANOpen, Multi-Circuit Power Meter (100 A) PM P-CPS CANOpen, Multi-Circuit Power Meter (200 A) PM-4324A-240P-CPS CANOpen, Multi-Circuit Power Meter (200 A) PM P-CPS CANopen, Multi-Circuit Power Meter (300 A) PM-4324A-360P-CPS CANopen, Multi-Circuit Power Meter (300 A) PM P-CPS CANopen, Multi-Circuit Power Meter (400 A) PM-4324A-400P-CPS CANopen, Multi-Circuit Power Meter (400 A) 7-17 ICP DAS CO., LTD. Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems Vol. FPC

19 CT Introduction for Smart Power Meter Dimensions (Units: mm): PAC Products 100: CTΦ10mm (60 A Max.) 39 TopView Fr 360P: CTΦ36mm (300 A Max.) 38.4±0.3 22± ± ± ±0.3 19± ±0.3 Panel Products Left View 160: CTΦ16mm (100 A Max.) Front View ±0.3 Left View 400P: CTΦ36mm (400 A Max.) 38.4±0.3 22±0.3 Front View 57± ±0.3 Remote I/O Module and Unit 26 Left View 47 Front View ±0.3 Left View 4 9.7±0.3 Front View 19± ±0.3 Industrial 240: CTΦ24mm (200 A Max.) RCT1000P: CTΦ800mm (1000 A Max.) Wireless Installation Left View Front View A B C Motion Automation Energy Management Clip-on CT Installation A B C D DIN-Rail Mounting (EX: PM-3133) DAQ Card Rogowski coil Soft CT Installation Accessories Website: service@icpdas.com Vol. FPC

20 ICPDAS Product Catalog 8-channel True RMS Input Module Features: 8-channel True RMS Input ±0.15% Factory Calibrated Accuracy The RMS input range: +150 mvrms ~ +10 Vrms For Standard Operation with Frequencies: 45 Hz ~ 10 KHz Individual Channel Configurable M-7017RMS Introduction: The M-7017RMS is an 8-channel differential AC input module that is used to convert the AC input signals to their True RMS DC values. The RMS input range can be from +150 mvrms to +10 Vrms, and each channel can be configured individually. The M-7017RMS is a complete, high-accuracy, RMS-to-DC converter that computes the True RMS DC value of any complex waveform. It also features 4 kv ESD protection, 2500 VDC intra-module isolation and +/-35 VDC overvoltage protection. System Specifications: Applications: Building Automation Factory Automation Machine Automation Remote Maintenance Remote Diagnosis Testing Equipment Interface RS-485 Bias Resistor No (Usually supplied by the RS-485 Master. Or, add a tm-sg4 or SG-785.) Baud Rate 1200 to bps Protocol Modbus RTU, DCON Dual Watchdog Yes, Module (1.6 Seconds), (Programmable) LED Indicators/Display System LED Indicator 1 as Power/ Indicator Isolation Intra-module Isolation, Field-to-Logic 2500 VDC EMS Protection ESD (IEC ) ±4 kv Contact for each Terminal ±8 kv Air for Random Point EFT (IEC ) ±4 kv for Power Line Surge (IEC ) ±0.5 kv for Power Line Power Reverse Polarity Protection Yes Input +10 ~ +30 VDC Consumption 0.9 W Mechanical Dimensions (L W H) 123 mm 72 mm 35 mm Installation DIN-Rail Environment Operating Temperature -25 to +75 C Storage Temperature -40 to +85 C Humidity 10 to 95% RH, Non-condensing I/O Specifications: Analog Input Channels 8 Wiring Differential 0 ~ +10 Vrms, 0 ~ +5 Vrms, Input Range 0 ~ +1 Vrms, 0 ~ +500 mvrms, 0 ~ +150 mvrms Resolution 16-bit Sinusoid 50/60 Hz ±0.15% of FSR 45 Hz to 10 khz ±0.5% of FSR Accuracy Non-Sinusoid Crest Factor = 1 to 2 ±0.2% of FSR Crest Factor = 2 to 3 ±0.35% of FSR DC 0 ~ +10 Vrms/ 0 ~ +5 ±0.3% of FSR Vrms/ 0 ~ +1 Vrms, Other ±0.7% of FSR Sampling Rate 10 Hz (Total) -3dB Bandwidth 15.7 Hz Zero Drift ±20 μv/ C Span Drift ±25 ppm/ C Common Mode Rejection 86 db Normal Mode Rejection 100 db Input Impedance >2 MΩ Individual Channel Configuration Overvoltage Protection Yes ±35 VDC 7-19 ICP DAS CO., LTD. Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems Vol. FPC

21 DN-800 Introduction Series Voltage Attenuator and Current Transformer Introduction: DN-800 series is a Voltage Attenuator and Current Transformer designed for used in high-voltage applications. The current can be converted into +/- 10 Vpp attenuated signal, so that a general electronic measuring device is able to read the signals. Compared to ICP DAS power meter products (PM-3033, PM-3133, PM-4324, etc.), in addition to AC signals, the DN-800 series can convert DC signals as well. The users can use appropriate ICP DAS Remote I/O Modules such as: M-7017R, I-87017RW, or ET-7217 to measure the converted +/- 10 VDC signal via DN-800 series. And use M-7017RMS or I-87017W-RMS, etc. to measure the AC signals. sby using DN-800 series, the power data of all kinds of machines and AC/DC motors can be easily measured and retrieved, and then the analyzed data can be used to develop a model to build a failure warning system. Applications: The operating current of AC or DC motor of the machines is converted into +/- 10 Vpp attenuated signal via DN-844, and then the +/- 10 Vpp signal is converted based on Modbus / RTU protocol for seamless integration with all kinds of PLC or SCADA. Wireless PAC Products Panel Products Remote I/O Module and Unit Industrial Appearance and Specifications: DN-843VI-600V DN-843I-CT-1 DN-843I-CT-10 DN-843I-CT-20 DN-843I-CT-50 Motion Automation DN-831I-100V-50A DN-831I-100V-200A DN-831I-100V-500A DN-848VI-10V DN-848VI-80V DN-848VI-150V DN A DN A DN A Energy Management DAQ Card Model Input Channel Input Type Input Range CT Type Cable Output DN-831I-100V-50A ±100 Vpp, ±50 A 1 Voltage, DN-831I-100V-200A AC/DC ±100 Vpp, ±200 A 1 Current DN-831I-100V-500A ±100 Vpp, ±500 A Clip-on 1.5 m/3 m ±10 Vpp DN-843VI-600V 3 Voltage AC/DC ±600 Vpp N/A N/A ±10 Vpp DN-848VI-10V ±10 Vpp, DN-848VI-80V DN-848VI-150V 8 Voltage AC/DC ±80 Vpp, ±150 Vpp N/A N/A ±10 Vpp DN-843I-CT-1 ±1 A, ±1.6 Vpp, DN-843I-CT-10 ±10 A, Solid Core ±10 Vpp, 3 Current AC/DC N/A DN-843I-CT-20 ±20 A, (closed) ±10 Vpp, DN-843I-CT-50 ±50 A ±4 Vpp DN A ±50 A, DN A DN A 4 Current AC/DC ±200 A, ±500 A Clip-on 1.5 m/3 m ±10 Vpp Accessories Website: service@icpdas.com Vol. FPC

22 ICPDAS Product Catalog Industrial Multi-power-meter Display TPD-433-PM TPD-703-PM Features: Built-in HMI for Information Display of Power Meters 4.3"/7" Colorful Display with Touch Panel IP40/IP60 Ingress Protection for Front Panel Built-in Real Time Clock Support Modbus TCP/RTU Protocols Support Max. of 8 Single-phase/3-phase Power Meters (PM-3xxx series) or One PM-4324 Support Max. of 4 Modbus/TCP Connections for SCADA Software Support Phase Sequence Detection Support Fine Tune of Voltage and Current Ratio VPD-143N-PM 4.3 Series VPD-173-PM 7 Series Introduction: The Industrial Multi-power-meter Display features 4.3"/7" high-resolution high-color TFT touch screen and IP40/IP65 warterproof. The built-in HMI screen pages for the information display of power meter, via the communication mechanism, can automatically display the meter information without additional programming. The multi-power-meter & multi-circuit device information can be shown in one display device, customers can now provide the display solution to the local end. Furthermore, the data can be integrated into the background SCADA control system, not only to get the power information, but also to facilitate the integration and configuration. Meter Configuration Guide: Ordering Information: Model No. Description TPD-433-PM CR 4.3" Industrial Multi-meter TouchPAD, IP40 Waterproof (RoHS) VPD-143N-PM CR 4.3" Industrial Multi-meter TouchPAD, IP65 Waterproof (RoHS) TPD-703-PM CR 7" Industrial Multi-meter TouchPAD, IP40 Waterproof (RoHS) VPD-173-PM CR 7" Industrial Multi-meter TouchPAD, IP65 Waterproof (RoHS) 7-21 ICP DAS CO., LTD. Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems Vol. FPC