Ethernet Remote I/O Modules. OME-ET-7000/ OME-PET-7000 Series. Features

Transcription

1 Ethernet Remote I/O Modules OMEET7000/ OMEPET7000 Series U MultiFunction Web Based Ethernet I/O Modules Models Available For Thermocouple, RTD, Analog Voltage and Current Input U BuiltIn Web Server for Remote Configuration and I/O Monitoring/Control U Web HMI U Communications Security U Supports Modbus TCP and UDP Protocols U OMEPET7000 Series Features PoE (PoweroverEthernet) The OMEET7000/OMEPET7000 Series, a webbased Ethernet I/O module, features a builtin web server which allows configuration, I/O monitoring and I/O control by simply using a regular web browser. Remote control is as easy as browsing the Internet. With the web HMI function, programming or HTML skills are not required; creating dynamic and attractive web pages for I/O monitoring and I/O control is easy. The OMEET7000/OMEPET7000 Series offers easy and safe access for users at any time, from any location. In addition, the OMEET7000/OMEPET7000 Series also supports Modbus TCP protocol that makes perfect integration to SCADA software. OMEPET7000 features PoE where not only data but also power is carried through an Ethernet cable. This feature makes installation of OMEPET7000 easy. No more unnecessary wires; only an ethernet cable that takes care of everything in the field. Features OMEPET7000 OMEET7002 shown smaller than actual size.. Power over Ethernet (PoE) The OMEPET7000 series module can be powered by an IEEE802.3af compliant PoE switch. Both data and power can be carried by an Ethernet cable eliminating the need for additional wiring and power supply. Applications Building Automation, Factory Automation, Machine Automation, Remote Maintenance, Remote Diagnosis, Testing Equipment. OMEPET Builtin Web Server Each OMEET7000/OMEPET7000 module has a Builtin web server that allows the users to easily configure, monitor and control the module from a remote location using a regular web browser. SM Extended Warranty Program OMEGACARE SM extended warranty program is available for this series. Ask your sales representative for full details when placing an order. OMEGACARE SM covers parts, labor and equivalent loaners.

2 3. Web HMI The Web HMI function allows the users to create dynamic and attractive web pages to monitor and control the I/O points. Users can upload specific I/O layout pictures (bmp, jpg, gif format) and define a description for each I/O point. No HTML or Java skills are needed to create the web pages. Communication Watchdog is a software function to monitor the communication between the host and the OMEET7000/OMEPET7000 module. The timeout of the communication Watchdog is programmable, when the OMEET7000/OMEPET7000 doesn t receive commands from the host for a while, the watchdog forces the AO/DO to preprogrammed Safe Value to prevent unpredicatable damage of the connected devices. 4. Communication Security Account and password are needed when logging into the OMEET7000 web server. An IP address filter is also included, which can be used to allow or deny connections with specific IP addresses. 5. Support for both Modbus TCP and Modbus UDP Protocols The Modbus TCP, Modbus UDP slave function on the Ethernet port can be used to provide data to remote SCADA software. A free MODBUS software development toolkit is included on the utility software CD that is supplied with the OMEET7000/ OMEPET7000 Series modules. 6. Builtin I/O Various I/O components are mixed with multiple in a single module, which provides the most cost effective I/O usage and enhances performance of the I/O operations. 7. Dual Watchdog The Dual Watchdog consists of a module Watchdog and a communication Watchdog. The action of AO/DO are also associated with the Dual Watchdog. Module Watchdog is a Builtin hardware circuit to monitor the operation of the module and will reset the CPU if a failure occurs in the hardware or the software. Then the poweron value of AO/DO will be loaded. 8. Poweron Value and Safe Value Besides setting by the set AO/DO commands, the AO/DO can be set under two other conditions. Poweron Value: The Poweron Value is loaded into the AO/DO under 3 conditions: Poweron, reset by Module Watchdog, reset by reset command. Safe Value: When the Communication Watchdog is enabled and a Communication Watchdog timeout occurs, the safe value is loaded into the AO/DO.. I/O Pair Connection This function is used to create a AI/DI to AO/DO pair through the Ethernet. Once the configuration is completed, the OMEET7000/OMEPET7000 module can poll the status of remote AI/DI devices and then use the Modbus TCP protocol to continuously write to local AO/DO in the background. 0. Highly Reliable Under Harsh Environments Wide Operating Temperature Range: 25 to 75 C (3 to 67 F) Storage Temperature: 30 to 80 C ( to 76 F) Humidity 0 to 0% RH (noncondensing) 4.8 (.6).0 (.37) Dimensions: mm (inch) 0. (0.42) 3.7 (.25).0 (4.84) 0.2 (3.8) 0. (0.42) 32.3 (.27) 5.2 (2.33) 72.0 (2.83).4 (.4) 3.7 (.24) 8.0 (0.3) Top View Front View Left Side View Right Side View Rear View Bottom View 2

3 OMEET7000 Series OMEPET7000 Series Analog Input Models Model No. OMEET705 OMEPET705 OMEET707 OMEPET707 OMEET7070 OMEPET7070 OMEET708Z OMEPET708Z OMEET70Z OMEPET70Z AI Channel Voltage and Current Input Sensor Input Channel Type 7 8 0/ ±50 mv, ±500 mv, ± V, ±5 V, ±0 V, ±20 ma, 0 to 20 ma, 4 to 20 ma ±50 mv, ±500 mv, ± V, ±5 V, ±0 V, ±20 ma, 0 to 20 ma, 4 to 20 ma ±5 mv, ±50 mv, ±00 mv, ±500 mv, ± V, ±2.5 V ±20 ma, 0 to 20 ma, 4 to 20 ma ±5 mv, ±50 mv, ±00 mv, ±50 mv, ±500 mv, ± V, ±5 V, ±0 V ±20 ma, 0 to 20 ma, 4 to 20 ma RTD: Pt00, Pt000, Ni20, Cu00, Cu000 4 DO / Open collector Thermocouple: J, K, T, E, R, S, B, N, C, L, M, and LDIN4370 Thermocouple: J, K, T, E, R, S, B, N, C, L, M, and LDIN Open collector Open collector Note: Use OMEET708Z/OMEPET708Z and OMEET70Z/OMEPET70Z for extremely accurate thermocouple measurement. 3

4 Multifunction I/O Model No. OMEET7002 OMEPET7002 Channel 3 AI AO DI/Counter DO Voltage and Current Input ±50 mv, ±500 mv, ± V, ±5 V, ±0 V, 0 ma to 20 ma, ±20 ma, 4 to 20 ma Sensor Input Channel Voltage and Current Output Channel Contact Channel Type 6 Wet (sink, source) 3 Power relay (form A) OMEET7026 OMEPET ±50 mv, ±500 mv, ± V, ± 5 V, ±0 V, 0 to 20 ma, ±20 ma, 4 to 20 ma 2 0 to 5 V, ±5 V, 0 to 0 V, ±0 V, 0 to 20 ma, 4 to 20 ma 2 Dry (source), wet (sink, source) 2 Open collector (sink) Digital I/O DI/Counter DO Model No. OMEET7042 OMEPET7042 Channel Contact / Channel Type / 6 Open collector Maximum Load 25 C 00 ma/channel OMEET7044 OMEPET Wet, source 8 Open collector 300 ma/channel OMEET7050 OMEPET Wet, source 6 Open collector 00 ma/channel OMEET705 OMEPET705 6 Wet, source OMEET7052 OMEPET Wet, source 8 Open collector 650 ma/channel OMEET7053 OMEPET Dry Relay Output and Digital Input Model No. OMEET7060 OMEPET7060 OMEET7067 OMEPET7067 Relay Output Channel Relay Type 6 Power relay 8 Power relay Form A (SPST N.O.) Form A (SPST N.O.) DI/Counter Maximum Load 25 C Channel Contact / 5.0 A/channel 6 Wet, source 5.0 A/channel 4

5 3Channel Analog Input and DIO Modules OMEET7002/OMEPET7002 U BuiltIn Web Server U Web HMI U Support for both Modbus TCP and Modbus UDP Protocols U Communication Security U Dual Watchdog U Wide Operating Temperature Range: 25 to 75 C (3 to 67 F) U I/O Pair Connection U BuiltIn I/O AI: 3 Channels with 240 Vrms Overvoltage DI/Counter: 6 Channels Power Relay: 3 Channels Applications U Building Automation U Factory Automation U Machine Automation U Remote Maintenance U Remote Diagnosis U Testing Equipment OMEPET7002 shown actual size. Voltage Input Current Input The OMEET7002/OMEPET7002 is a webbased Ethernet I/O module that features a builtin web server which allows remote configuration, I/O monitoring and I/O control simply by using a regular web browser. Remote control is as easy as browsing the Internet. In addition, the web HMI function means that programming or HTML skills are no longer required so creating dynamic and attractive web pages for I/O monitoring and I/O control purposes is easy. The OMEET7002/OMEPET7002 offers easy and safe access for users at anytime and from any location, and also supports the Modbus TCP protocol that ensures perfect integration with SCADA software. Furthermore, the OMEPET7002 features PoE, meaning that not only is data transmitted through an Ethernet cable but also power making installation of the OMEPET7002 easy. No more unnecessary wires with only an ethernet cable being required to take care of everything in the field. The OMEET7002/OMEPET7002 is a multifunction module; there are 3channel analog inputs, 6channel digital inputs and 3channel relay outputs module. It provides programmable input range on all analog inputs (±50 mv, ±500 mv, ± V, ±5 V, ±0 V, ±20 ma, 0 to 20 ma and 4 to 20 ma). Each analog input is allowed to configure an individual range and has 240 Vrms high overvoltage protection. Jumper selectable for voltage or current inputs, OMEET7002/OMEPET7002 is fully RoHScompliant and has qualification for 4 kv ESD protection as well as 2500 Vdc intramodule isolation. mv/v V mv/v V Digital Input/ Counter Power Relay Relay Output Vin Vin Vin Default JUMPER Vin Vin Default Readback as Readback as 0 0 DIxto 0K 50 Vdc OPEN DIx 0K or <4 Vdc DIx DI.COM JUMPER 0K DI.COM DIx 0K 0 to 50 Vdc OPEN or <4 Vdc DIx 0K DI.COM ma ma DI.COM RLx.COM Relay Close AC/DCRLx.COM Relay Close Readback as AC/DC RLx.NO RLx.COM Relay Close RLx.NO AC/DC w RLx.NO DIx DI.COM 0K DI.COM DIx 0K DIx 0K DIx 0K DI.COM DI.COM DI.COM RLx.COM AC/DCRLx.COM OFF State Readback as 0 AC/DC RLx.NO RLx.COM RLx.NO AC/DC RLx.NO Vin JUMPER Vin Vin JUMPER Relay Open Relay Open Relay Open 5

6 6 System Specifications Models OMEET7002 OMEPET7002 Software Builtin Web Server Web HMI I/O Pair Connection Communication Ethernet Port 0/00 basetx with Auto MDI/ MDIX PoE Protocol Modbus TCP, Modbus UDP Security ID, password and IP filter, module (0.8 seconds), Dual Watchdog communication (programmable) LED Indicators L (System Running) (Ethernet Link/Act) (Ethernet 0/00 M Speed) PoE Power 2Way Isolation Ethernet 500 Vdc I/O 2500 Vdc 2500 Vdc EMS ESD (IEC ) 4 kv contact for each terminal and 8 kv air for random point EFT (IEC ) ±4 kv for power Surge (IEC ) ±4 kv for power Power Requirements Reverse Polarity Powered from, 0 to, 2 to Terminal Block 30 Vdc 48 Vdc, IEEE Powered from PoE 802.3af, Class Consumption.7 W Mechanical Dimensions (W x L x D) 72 x x mm (2.8 x 4.8 x.4) Installation L DINrail or wall mounting Environment Operating PET7002 Temperature 25 to 75 C (3 to 67 F) Storage Temperature 30 to 80 C ( to 76 F) Humidity 0 to 0% RH, noncondensing IN 5 IN 4 IN 3 IN 2 IN IN 0 R COM R NO RL COM RL NO RL0 COM RL0 NO Pin Assignments Vin 0 in 0 Vin 0 in 0 Vin in Vin in Vin 2 in 2 Vin 2 in 2 /A 0 IN 5 IN 4 IN 3 IN 2 IN IN 0 R COM R NO RL COM RL NO RL0 COM RL0 NO 0 (R)Vs R)Vs B)GND I/O Specifications Analog Input Channels 3 (differential) ±50 mv, ±500 mv, ±V, ±5 V, Type ±0 V 0 ma to 20 ma, ±20 ma, 4 to 20 ma (jumper selectable) Individual Channel Configuration Resolution Normal Mode 6bit Fast Mode 2bit Sampling Normal Mode 0 samples/second (total) Rate Fast Mode 60 samples/second (total) Accuracy Normal Mode ±0.% Fast Mode ±0.5% or better Zero Drift ±20 μv/ C Span Drift ±25 ppm/ C Overvoltage 240 Vrms Overcurrent 50 ma maximum at 0 Vdc/Vac maximum Input Voltage 2 MΩ Impedance Current 24 Ω Common Mode Rejection 86 db minimum Normal Mode Rejection 00 db Digital Input/Counter Channels 6 Contact Wet contact / (NPN/PNP) /source On Voltage Level 0 Vdc to 50 Vdc Off Voltage Level 4 Vdc maximum Input Impedance 0 kω, 0.5W Channels 6 Maximum Count 4,24,67,285 (32bit) Counters Maximum Input Frequency 00 Hz Minimum Pulse Width 5 ms Overvoltage 50 Vdc Power Relay Channels 3 Type Power relay, Form A (SPST N.O.) Operating Voltage Range 250 Vac/30 Vdc Maximum Load Current 5.0A/channel at 25 C Operate Time 6 ms (typical) Release Time 3 ms (typical) VDE: Vdc 30,000 ops (0 ops/minute) at 75 C 5 30 Vdc 70,000 ops (0 ops/minute) at 75 C Electrical Life (Resistive Load) UL: Vac/30 Vdc 6000 ops Vac/30 Vdc 00,000 ops Mechanical Life 20,000,000 ops. at no load (300 ops./minute) L Intramodule Isolation, FieldtoLogic 3750 Vdc PET7002 Poweron Value, programmable Safe Value, programmable Model No. Description OMEET7002 3channel analog input and DIO module OMEPET7002 3channel analog input and DIO module with PoE RAI5 mm (.4") DIN rail, m (3.3') length idrnps000 DIN rail power supply, 5 to 240 Vac input, 24 Vdc output at 850 ma OMESW05 5port unmanaged ethernet switch OMESW05POE 5port POE ethernet switch (four 0/00 base TX ports with POE and one 0/00 base TX uplink port) Comes complete with wall mount bracket, quick start guide, utility software and operator s manual on CD. Ordering Example: OMEET7002 3channel analog input and DIO module and OCW OMEGACARE SM extends standard year warranty to a total of 2 years.

7 7Channel RTD Input Modules OMEET705/OMEPET705 U BuiltIn Web Server U Web HMI U Support for both Modbus TCP and Modbus UDP Protocols U Communication Security U Dual Watchdog U Wide Operating Temperature Range: 25 to 75 C (3 to 67 F) U I/O Pair Connection U BuiltIn I/O RTD Input: 7 Channels Applications U Building Automation U Factory Automation U Machine Automation U Remote Maintenance U Remote Diagnosis U Testing Equipment The OMEET705/OMEPET705 is a webbased ethernet I/O module that features a builtin web server which allows remote configuration, I/O monitoring and I/O control simply by using a regular web browser. Remote control is as easy as browsing the Internet. In addition, the web HMI function means that programming or HTML skills are no longer required so creating dynamic and attractive web pages for I/O monitoring and I/O control purposes is easy. The OMEET705/ OMEPET705 offers easy and safe access for users at anytime and from any location, and also supports the Modbus TCP protocol that ensures perfect integration with SCADA software. Furthermore, the OMEPET705 features PoE, meaning that not only is data transmitted through an ethernet cable but also power making installation of the OMEPET705 easy. No more unnecessary wires with only an Ethernet cable being required to take care of everything in the field. OMEET705 shown actual size. OMEET705/OMEPET705 is specifically designed for longdistance RTD measurement. It features automatic compensation for threewire RTD so that it can measure correctly regardless of the length of wires and provide open wire detection for RTD measurement. OMEET705/OMEPET705 offers 7, each of which could be connected with different kinds of RTD (Pt00, Pt000, Ni20, Cu00, Cu000). Also, OMEET705/OMEPET705 is fully RoHScompliant and has qualification for 4 kv ESD protection as well as 2500 Vdc intramodule isolation. Wire Connections Open Collector () CH0,, 2, 5 and 6 CH3 and CH4 2Wire of RTD RTDx 3Wire of RTD RTDx RTDx RTDx RTD3 RTD3 RTD4 RTD4 RTD3 RTD3 RTD4 RTD4 7

8 System Specifications Model No. OMEET705 OMEPET705 Software Builtin Web Server Web HMI I/O Pair Connection Communication Ethernet Port 0/00 BaseTX with Auto MDI/ MDIX PoE Protocol Modbus TCP, Modbus UDP Security ID, password and IP filter Dual Watchdog, module (0.8 seconds), communication (programmable) LED Indicators L (System Running) (Ethernet Link/Act) (Ethernet 0/00 M Speed) PoE Power 2Way Isolation Ethernet 500 Vdc I/O 2500 Vdc 2500 Vdc EMS ESD (IEC ) 4 kv contact for each terminal and 8 kv air for random point EFT (IEC ) ±4 kv for power Power Requirements Reverse Polarity Powered from Terminal Block, 0 to 30 Vdc Powered from PoE, 2 to 48 Vdc, IEEE 802.3af, class Consumption 2.0 W 2.6 W Mechanical Dimensions (W x L x D) Installation Environment Operating Temperature Storage Temperature Humidity 72 x x mm (2.8 x 4.84 x.37") DINrail or wall mounting 25 to 75 C (3 to 67 F) 30 to 80 C ( to 76 F) 0 to 0% RH, noncondensing Pin Assignments RTD Input Channels Sensor Type Wire Connections Individual Channel Configuration Resolution Sampling Rate 7 (differential) Pt00, Pt000, Ni20, Cu00, Cu000 2/3 wire 6bit Accuracy ±0.05% Zero Drift Span Drift Common Mode Rejection Normal Mode Rejection Input Impedance Open Wire Detection 3wire RTD Lead Resistance Elimination ET705 RTD4 RTD4 RTD3 RTD3 RTD2 RTD2 RTD RTD RTD0 RTD0 I/O Specifications RTD5 RTD5 2 samples/second (total) ±0.5 μv/ C ±20 μv/ C 50 db 00 db > MΩ RTD6 ET705 RTD6 N.C. L 0 (R)Vs L RTD5 RTD5 RTD6 RTD6 N.C. (R)Vs To Order Visit omega.com/omeet7000_omepet7000 for Pricing and Details Model No. Description OMEET705 7channel RTD input module OMEPET705 7channel RTD input module with PoE RAI5 mm (.4") DIN rail, m (3.3') length idrnps000 DIN rail power supply, 5 to 240 Vac input, 24 Vdc output at 850 ma OMESW05 5port unmanaged ethernet switch OMESW05POE 5port POE ethernet switch (four 0/00 base TX ports with POE and one 0/00 base TX uplink port) Comes complete with wall mount bracket, quick start guide, utility software and operator s manual on CD. Ordering Example: OMEET705 7channel analog input module and OCW OMEGACARE SM extends standard year warranty to a total of 2 years. 8

9 8Channel Analog Input and DO Modules OMEET707/OMEPET707 U BuiltIn Web Server U Web HMI U Support for both Modbus TCP and Modbus UDP Protocols U Communication Security U Dual Watchdog U Wide Operating Temperature Range: 25 to 75 C (3 to 62 F) U I/O Pair Connection U BuiltIn I/O AI: 8 Channels with 240 Vrms Overvoltage DO: 4 Channels Applications U Building Automation U Factory Automation U Machine Automation U Remote Maintenance U Remote Diagnosis U Testing Equipment The OMEET707/OMEPET707 is a webbased Ethernet I/O module that features a builtin web server which allows remote configuration, I/O monitoring and I/O control simply by using a regular web browser. Remote control is as easy as browsing the Internet. In addition, the web HMI function means that programming or HTML skills are no longer required so creating dynamic and attractive web pages for I/O monitoring and I/O control purposes is easy. The OMEET707/ OMEPET707 offers easy and safe access for users at anytime and from any location, and also supports the Modbus TCP protocol that ensures perfect integration with SCADA software. Furthermore, the OMEPET707 features PoE, meaning that not only is data transmitted through an Ethernet cable but also power making installation of the OMEPET707 easy. No more unnecessary wires with only an Ethernet cable being required to take care of everything in the field. Wire Connections Voltage Input JUMPER Current Input OMEET707 shown actual size. The OMEET707/OMEPET707 is a 6bit, 8channel differential analog input and 4channel digital ouput module that provides programmable input range on all analog (±50 mv, ±500 mv, ± V, ±5 V, ±0 V, ±20 ma, 0 to 20 ma and 4 to 20 ma) and digital output can be set as alarm output with shortcircuit protection and overload protection. Each analog channel is allowed to configure an individual range and has 240 Vrms high overvoltage protection. Modules are jumper selectable for voltage or current input. The sampling rate of OMEET707/OMEPET707 is selectable; fast mode or normal mode. OMEET707/OMEPET707 also has qualification for 4 kv ESD protection as well as 3000 Vdc intramodule isolation. JUMPER mv/v V Vin Vin Vin Vin Default ma Digital Output Readback as OFF State Readback as 0 Open Collector () 5 to 50 VDC 5 to 50 VDC

10 ET707 System Specifications Models OMEET707 OMEPET707 Software Builtin Web Server Web HMI I/O Pair Connection Communication Ethernet Port 0/00 basetx with auto MDI/ MDIX PoE Protocol Modbus TCP, Modbus UDP Security ID, password and IP filter Dual Watchdog, module (0.8 seconds), communication (programmable) LED Indicators L (System Running) (Ethernet Link/Act) (Ethernet 0/00 M Speed) PoE Power 2Way Isolation Ethernet 500 Vdc I/O 2500 Vdc 2500 Vdc EMS ESD (IEC ) 4 kv contact for each terminal and 8 kv air for random point EFT (IEC ) ±4 kv for power Power Requirements Reverse Polarity Powered from Terminal Block, 0 to 30 Vdc Powered from PoE, 2 to 48 Vdc, IEEE 802.3af, class Consumption 2.6 W 3. W Mechanical Dimensions (W x L x D) Installation Environment Operating Temperature Storage Temperature Humidity 72 x x mm (2.83 x 4.84 x.38") DINrail or wall mounting 25 to 75 C (3 to 67 F) 30 to 80 C ( to 76 F) 0 to 0% RH, noncondensing Pin Assignments I/O Specifications Analog Input Channels Type Vin6 Vin6 Vin5 Vin5 Vin4 Vin4 Vin3 Vin3 Vin2 Vin2 Vin Vin Vin0 Vin0 Vin7 Vin7 DO0 DO DO2 DO3 (R)Vs 8 (differential) ±50 mv, ±500 mv, ±V, ±5V, ±0V, ±20 ma, 0 to 20 ma, 4 to 20 ma (jumper selectable) Individual Channel Configuration Resolution Normal Mode 6bit Fast Mode 2bit Sampling Normal Mode 0 samples/second (total) Rate Fast Mode 60 samples/second (total) Accuracy Normal Mode ±0.% Fast Mode ±0.5% or better Zero Drift ±20 μv/ C Span Drift ±25 ppm/ C Overvoltage 240 Vrms Input Voltage 2 MΩ Impedance Current 25 Ω Common Mode Rejection 86 db minimum Normal Mode Rejection 00 db Digital Output Channels 4 Type Isolated open collector / (NPN/PNP) Maximum Load Current 700 ma/channel Load Voltage 5 Vdc to 50 Vdc Overvoltage 60 Vdc Overload.4 A ShortCircuit PowerOn Value, programmable Safe Value, programmable ET707 To Order Visit omega.com/omeet7000_omepet7000 for Pricing and Details 0 L Vin7 Vin7 DO0 DO DO2 DO3 (R)Vs Model No. Description OMEET707 8channel analog input and DO module OMEPET707 8channel analog input and DO module with PoE RAI5 mm (.4") DIN rail, m (3.3') length idrnps000 DIN rail power supply, 5 to 240 Vac input, 24 Vdc output at 850 ma OMESW05 5port unmanaged ethernet switch OMESW05POE 5port POE ethernet switch (four 0/00 base TX ports with POE and one 0/00 base TX uplink port) Comes complete with wall mount bracket, quick start guide, utility software and operator s manual on CD. Ordering Example: OMEET707 8channel analog input and DO module and OCW OMEGACARE SM extends standard year warranty to a total of 2 years. 0

11 0 Differential/20 SingleEnded Channel Analog Input Modules OMEET7070/OMEPET7070 U BuiltIn Web Server U Web HMI U Support for Both Modbus TCP and Modbus UDP Protocols U Communication Security U Dual Watchdog U Wide Operating Temperature Range 25 to 75 C (3 to 67 F) U I/O Pair Connection U BuiltIn I/O AI: 0 Differential/20 SingleEnded Channels with 240 Vms Overvoltage Applications U Building Automation U Factory Automation U Machine Automation U Remote Maintenance U Remote Diagnosis U Testing Equipment The OMEET7070/OMEPET7070 is a webbased Ethernet I/O module that features a builtin web server which allows remote configuration, I/O monitoring and I/O control simply by using a regular web browser. Remote control is as easy as browsing the Internet. In addition, the web HMI function means that programming or HTML skills are no longer required so creating dynamic and attractive web pages for I/O monitoring and I/O control purposes is easy. The OMEET7070/OMEPET7070 offers easy and safe access for users at anytime and from any location, and also supports the MODBUS TCP protocol that ensures perfect integration with SCADA software. Furthermore, the OMEPET7070 features PoE, meaning that not only is data transmitted through an Ethernet cable but also power making installation of the OMEPET7070 easy. No more unnecessary wires with only an Ethernet cable being required to take care of everything in the field. The OMEET7070 is a 6bit, 0channel differential or 20channel singleended analog input module that provides programmable input range on all analog (±50 mv, ±500 mv, ± V, ±5 V, ±0 V, ±20 ma, 0 to 20 ma and 4 to 20 ma). Each analog channel is allowed to configure an individual range and has 240 Vrms high overvoltage protection. Modules are jumper selectable for voltage or current input. The sampling rate of OMEET707/ OMEPET707 is selectable; fast mode or normal mode. OMEET707/OMEPET707 also has qualification for 4 kv ESD protection as well as 3000 Vdc intramodule isolation. Wire Connections mv/v V mv/v V ma Voltage Input (Differential Mode) JUMPER Voltage Input (Singleended Mode) JUMPER Vin Current Input Vin Vin Vin Vin OMEET7070 shown actual size. JUMPER Default Default SM or Shop Online at omega.com

12 ET System Specifications Models OMEET7070 OMEPET7070 Software Builtin Web Server Web HMI I/O Pair Connection Communication Ethernet Port 0/00 BaseTX with Auto MDI/MDIX PoE Protocol Modbus TCP, Modbus UDP Security ID, password and IP filter Dual Watchdog, module (0.8 seconds), communication (programmable) LED Indicators L (System Running) (Ethernet Link/Act) (Ethernet 0/00 M Speed) PoE Power 2Way Isolation Ethernet 500 Vdc I/O 2500 Vdc 2500 Vdc EMS ESD (IEC ) 4 kv contact for each terminal and 8 kv air for random point EFT (IEC ) ±4 kv for power Power Requirements Reverse Polarity Powered from Terminal Block, 0 to 30 Vdc, 2 to 48 Vdc Powered from PoE, IEEE 802.3af, class Consumption 2.6 W 3.8 W Mechanical Dimensions (W x L x D) 72 x x mm (2.83 x 4.84 x.38") Installation DINrail or wall mounting Environment Operating Temperature 25 to 75 C Storage Temperature 30 to 80 C Humidity 0 to 0% RH, noncondensing Model No. OMEET7070 OMEPET7070 RAI5 idrnps000 OMESW05 OMESW05POE Pin Assignments I/O Specifications Analog Input Channels Type Individual Channel Configuration Normal Resolution Mode Fast Mode Sampling Rate Accuracy Zero Drift Span Drift Vin6/Vin6 Overvoltage Vin6 Vin5/Vin5 Vin5 Vin4/Vin4 Normal Mode Fast Mode Normal Mode Fast Mode Differential Single Ended Input Voltage Impedance Current Common Mode Rejection Normal Mode Rejection Vin7 Vin7/Vin7 Vin8 Vin8/Vin8 Vin Vin/Vin (R)Vs 0 differential or 20 singleended*, software selectable ±50 mv, ±500 mv, ±V, ±5V, ±0V, ±20 ma, 0 to 20 ma, 4 to 20 ma (Jumper Selectable) 6bit 2bit 0 samples/second (total) 60 samples/second (total) ±0.% ±0.5% or better ±20 μv/ C ±25 ppm/ C 240 Vrms 50 Vrms 2 MΩ (differential), MΩ (singleended) 25 Ω 86 db minimum 00 db Vin4 Vin3/Vin3 Vin3 Vin2/Vin2 Vin2 ET7070 Vin/Vin Vin Vin0/Vin0 Vin0 0 L Vin7 Vin7/Vin7 Vin8 Vin8/Vin8 Vin Vin/Vin (R)Vs Description 0 differential/20 singleended channel analog input module 0 differential/20 singleended channel analog input module with PoE mm (.4") DIN rail, m (3.3') length DIN rail power supply, 5 to 240 Vac input, 24 Vdc output at 850 ma 5port unmanaged ethernet switch 5port POE ethernet switch (four 0/00 base TX ports with POE and one 0/00 base TX uplink port) * Differential mode can be used for voltage input and current input. Singleended mode can be used for voltage input only. Comes complete with wall mount bracket, quick start guide, utility software and operator s manual on CD. Ordering Example: OMEET differential/20 singleended channel analog input module and OCW OMEGACARE SM extends standard year warranty to a total of 2 years.

13 0Channel Thermocouple Input Modules with OMEDB820 Daughter Board OMEET708Z/OMEPET708Z U BuiltIn Web Server U Web HMI U Support for Both Modbus TCP and Modbus UDP Protocols U Communication Security U Dual Watchdog U Wide Operating Temperature Range: 25 to 75 C (3 to 67 F) U I/O Pair Connection U BuiltIn I/O Thermocouple Input: 0 Channels DO: 6 Channels Applications U Building Automation U Factory Automation U Machine Automation U Remote Maintenance U Remote Diagnosis U Testing Equipment OMEET708Z shown actual size. The OMEET708Z/OMEPET708Z is a webbased Ethernet I/O module that features a builtin web server which allows remote configuration, I/O monitoring and I/O control simply by using a regular web browser. Remote control is as easy as browsing the Internet. In addition, the web HMI function means that programming or HTML skills are no longer required so creating dynamic and attractive web pages for I/O monitoring and I/O control purposes is easy. The OMEET708Z/ OMEPET708Z offers easy and safe access for users at anytime and from any location, and also supports the Modbus TCP protocol that ensures perfect integration with SCADA software. Furthermore, the OMEPET708Z features PoE, meaning that not only is data transmitted through an Ethernet cable but also power making installation of the OMEPET708Z easy. No more unnecessary wires with only an Ethernet cable being required to take care of everything in the field. The OMEET708Z/OMEPET708Z is specifically designed for extremely accurate thermocouple measurement and features automatic coldjunction compensation for each channel to ensure temperature output consistency and stable temperature output in the field. Current input and voltage input are both supported. Another feature is that the ten input can be individually configured for different kinds of analog input. Open thermocouple detection and ESD/EFT/Surge protection mechanisms are also included. The six digital output can be set as alarm outputs with shortcircuit protection and overload protection. SM or Shop Online at omega.com 3

14 System Specifications Model No. OMEET708Z OMEPET708Z Software Builtin Web Server Web HMI I/O Pair Connection Communication Ethernet Port 0/00 BaseTX with Auto MDI/MDIX PoE Protocol Modbus TCP, Modbus UDP Security Dual Watchdog LED Indicators L (System Running) (Ethernet Link/Act) (Ethernet ID, password and IP filter, module (0.8 seconds), communication (programmable) 0/00 M Speed) PoE Power 2Way Isolation Ethernet 500 Vdc I/O 2500 Vdc 2500 Vdc EMS ESD (IEC ) EFT (IEC ) Power Requirements Reverse Polarity 4 kv contact for each terminal and 8 kv air for random point ±4 kv for Power Powered from Terminal Block, 0 to 30 Vdc Powered from PoE Consumption 2.0 W 3.0 W Mechanical Dimensions (W x L x D) Installation Environment Operating Temperature Storage Temperature Humidity, 2 to 48 Vdc, IEEE 802.3af, class 72 x 6 x mm (2.83 x 4.5 x.37") DINrail or wall mounting 25 to 75 C (3 to 67 F) 30 to 80 C ( to 76 F) 0 to 0% RH, noncondensing I/O Specifications Thermocouple Input Channels 0 (differential) ±5 mv, ±50 mv, ±00 mv, ±500 mv, ± V, ±2.5 V ±20 ma, 0 to 20 ma, 4 to Sensor Type 20 ma (Requires Optional External 25 Ω Resistor) Thermocouple (J, K, T, E, R, S, B, N, C, L, M, and LDIN4370) Individual Channel Configuration Resolution 6bit Sampling Rate 0 samples/second (total) Accuracy ±0.% of FSR or better Zero Drift ±0.5 μv/ C Span Drift ±25 ppm/ C Over Voltage 240 Vrms Input Impedance >300 kω Common Mode Rejection 50 db minimum Normal Mode Rejection 00 db Temperature Output Consistency Stable Temperature Output in the Field Open Wire Detection Digital Output Channels 6 Type Isolated open collector / (NPN/PNP) Max. Load Current 700 ma/channel Load Voltage 5 to 50 Vdc Overvoltage 60 Vdc Overload.4 A Shortcircuit Poweron Value, programmable Safe Value, programmable Wire Connections 25 Ω V Voltage Input (Default) CH Thermocouple Input (Default) CH CH CH Current Input CH Note: When connecting to a current source, an CHoptional external 25 Ω resistor is required. Digital Output Readback as OFF State Readback as 0 Open Collector () 5 to 50 Vdc 5 to 50 Vdc 4

15 3.5 (.24) Dimensions: mm (inch) Rear M3 Pin 3.5 Assignments OMEDB820 CON CHCH2 CH2 33 (.3) 3.5 (.55) 72.0 (2.83) CH3 3.5 (.55) CH4 OMEDB820 L (R)Vs DO5 DO4 DO2 DO3 DO DO0 64 (2.52) 58 (2.28) CH 64 (2.52) 64 (2.52) 0.8 (0.42) 5 (0.5) 2.8 (0.5) 2.8 (0.5) 2.8 (0.5) 2.8 (0.5) 2.8 (0.5) 65 (2.55) (0.42) 5 (0.5) (2.55) 5 (0.5) 0.8 (0.42) 0.8 (0.42) Top view 5 (0.5) 0.8 (0.42) 5 (0.5) 0.8 (0.42) 0. (0.4 Rear view 58 (2.28) 0.8 (0.42) (0.5) (0.42) (0.42) (0.5) 5 (0.5) 78 (3.07) 73.3 (2.88) 5 (0.5) 2.8 (0.5)(.37) 2.8 (0.5) 2.8 (0.5) 2.8 (0.5) Bottom View 2.8 (0.5) 0.8 (0.42) 5 (0.5) ( 5 (0.5) 0.8 (0.42) Left side view Model No. OMEET708Z OMEPET708Z RAI5 idrnps000 OMESW05 OMESW05POE 0 0 To Order Visit omega.com/omeet7000_omepet7000 for Pricing and Details 64 (2.52) 58 (2.28) 0.8 (0.42) (.37) 78 (2.55) CH8 (2.55) (2.88) CH83.5 CH (.55) CON 73.3 (2.88) 78 (3.07) 73.3 (2.88) 58 (2.28) CH6 65 CH7(2.55) CH765(3.07) Front view 5 (0.5) (4.56) (0.42) (0.42) (0.42) (0.5) (0 CH6 CH3 OMEET708Z Bottom view Description 0channel thermocouple input module with OMEDB820 daughter board 0channel thermocouple input module with OMEDB820 daughter board with PoE mm (.4") DIN rail, m (3.3') length DIN rail power supply, 5 to 240 Vac input, 24 Vdc output at 850 ma 5port unmanaged ethernet switch 5port POE ethernet switch (four 0/00 base TX ports with POE and one 0/00 base TX uplink port) Comes complete with wall mount bracket, quick start guide, utility software and operator s manual on CD. Ordering Example: OMEET708Z 0channel thermocouple input module with OMEDB820 daughter board and OCW OMEGACARESM extends standard year warranty to a total of 2 years. ( 3.5 (.55) (.37) (.37) (.37) CH5 CH5 58 (2.28) 64 (2.52) 64 (2.52) 64 (2.52) CH4 Top view DN8 58 (2.28) 64 (2.52) 58 (2.28) 58 (2.28) 64 (2.52) 78 OMEDB (2.52) (3.07) (.55) DIN rail(.55) mounting bracket CH0 CH0 2SCREW 58 (2.28) 6 M3 CH (4.56) OMEDB (2.28) COM OMEDB (.55) 78 (3.07) (3.07) 78 (2.88) (3.07) 73.3 (2.88) 73.3 (2.88) 72.0 (2.83) 6 Rear (4.56) view (R)Vs OMEDB (.3) OMEDB (.3) OMEDB (2.83) F.G. DO2 2SCREW M3 3.5 (.55) 3.5 (.55) 3.5 (.55) F.G. F.G SCREW M DO0 (.37) DO5 (.24) (.37) Right side view 6 (4.56) 6 (4.56) 6 33 (.3) (4.56) OMEDB (2.83) OMEDB820 OMEDB (.24) (.37) 78 (3.07) (3.07) 73.3 (3.07) (2.88) (2.88) (2.88)F.G. (.37) (.37) 3.5 (.24) 2SCREW M3 The OMEDB820 daughter board 2SCREW (terminal panel) connects directly to M3 the OMEET708Z or OMEPET708Z 2SCREW 3.5 M3 2SCREW Ethernet module. (.37) (.24) 33 (.3) 72.0 (2.83) 33 (.3) 72.0 (2.83) 33 (.3) 72.0 (2.83) 2SCREW M3 2SCREW 2SCREW M3 M3 33 (.3) 72.0 (2.83) 33 (.3) 33 (.3) (2.83) (2.83) Front view (.37) (.37) (.37) DO DO4 3.5 (.24) 3.5 (.24) 3.5 (.24) DO3 Front (.37) (.24) (.24) 5

16 0Channel Thermocouple Input Modules with OMEDB820 Daughter Board OMEET70Z/OMEPET70Z U BuiltIn Web Server U Web HMI U Support for both Modbus TCP and Modbus UDP Protocols U Communication Security U Dual Watchdog U Wide Operating Temperature Range: 25 to 75 C (3 to 67 F) U I/O Pair Connection U BuiltIn I/O AI: 0 Channels with 240 Vrms Overvoltage DO: 6 Channels Applications U Building Automation U Factory Automation U Machine Automation U Remote Maintenance U Remote Diagnosis U Testing Equipment OMEET70Z shown actual size. The OMEET70Z/OMEPET70Z is a webbased Ethernet I/O module that features a builtin web server which allows remote configuration, I/O monitoring and I/O control simply by using a regular web browser. Remote control is as easy as browsing the Internet. In addition, the web HMI function means that programming or HTML skills are no longer required so creating dynamic and attractive web pages for I/O monitoring and I/O control purposes is easy. The OMEET70Z/ OMEPET70Z offers easy and safe access for users at anytime and from any location, and also supports the Modbus TCP protocol that ensures perfect integration with SCADA software. Furthermore, the OMEPET70Z features PoE, meaning that not only is data transmitted through an Ethernet cable but also power making installation of the OMEPET70Z easy. No more unnecessary wires with only an Ethernet cable being required to take care of everything in the field. The OMEET70Z/OMEPET70Z is specifically designed for extremely accurate thermocouple measurement and features automatic coldjunction compensation for each channel to ensure temperature output consistency and stable temperature output in the field. Current input and voltage input are both supported. Another feature is that the ten input can be individually be configured for different kinds of analog input. Open thermocouple detection and ESD/EFT/Surge protection mechanisms are also included. The six digital output can be set as alarm outputs with shortcircuit protection and overload protection. 6

17 System Specifications Models OMEET70Z OMEPET70Z Software Builtin Web Server Web HMI I/O Pair Connection Communication Ethernet Port 0/00 BaseTX with Auto MDI/MDIX PoE Protocol Modbus TCP, Modbus UDP Security ID, Password and IP Filter, module Dual Watchdog (0.8 seconds), communication (programmable) LED Indicators L (System Running) (Ethernet Link/Act) (Ethernet 0/00 M Speed) PoE Power 2Way Isolation Ethernet 500 Vdc I/O 2500 Vdc 2500 Vdc EMS ESD (IEC ) 4 kv contact for each terminal and 8 kv air for random point EFT (IEC ) ±4 kv for power Surge (IEC ) ±3 kv for power Power Requirements Reverse Polarity Powered from Terminal Block, 0 to 30 Vdc, 2 to 48 Vdc Powered from PoE, IEEE 802.3af, Class Consumption 2.5 W 3.5 W Mechanical Dimensions (W x L x D) 72 x 6 x mm (2.83 x 4.56 x.37") Installation DINrail or wall mounting Environment Operating Temperature 25 to 75 C (3 to 67 F) Storage Temperature 30 to 80 C ( to 76 F) Humidity 0 to 0% RH, noncondensing I/O Specifications Analog Input Channels 0 (differential) ±5 mv, ±50 mv, ±00 mv, ±50 mv, ±500 mv, ± V, ±2.5 V, ±5 V, ±0 V, Sensor Type ±20 ma, 0 to 20 ma, 4 to 20 ma (jumper selectable) Thermocouple (J, K, T, E, R, S, B, N, C, L, M, and LDIN4370) Individual Channel Configuration Resolution 6bit Sampling Rate 0 samples/second (total) Accuracy ±0.% of FSR or better Zero Drift ±0.5 μv/ C Span Drift ±25 ppm/ C Over Voltage 240 Vrms Input Impedance >300 kω Common Mode Rejection 86 db minimum Normal Mode Rejection 00 db Temperature Output Consistency Stable Temperature Output in the Field Open Wire Detection Digital Output Channels 6 Type Isolated open collector / (NPN/PNP) Maximum Load Current 700 ma/channel Load Voltage 5 to 50 Vdc Overvoltage 60 Vdc Overload.4 A ShortCircuit PowerOn Value, programmable Safe Value, programmable Front Rear The OMEDB820 daughter board (terminal panel) connects directly to the OMEET70Z or OMEPET70Z Ethernet module. SM or Shop Online at omega.com 7

18 Pin Assignments F.G. F.G OMEDB820 (.24) 3.5 (.24) 3.5 (.24) COM 2SCREW 3.5 M3 (.24) OMEET70Z 2SCREW M3 2SCREW M3 3.5 (.24) (R)Vs DO4 DO5 3.5 (.55) 3.5 (.55) 3.5 (.55) 2SCREW 33 (.3) 72.0 (2.83) 33 (.3) 72.0 (2.83) Voltage Input (Default) 3.5 OMEDB820 CH OMEDB820 V OMEDB820 OMEDB (2.28) 78 (3.07) (3.07) 78 (2.88) (3.07) 73.3 Thermocouple 73.3 (2.88) (2.88) 64 (2.52) (2.28) (3.07)V 58 (2.28) (2.52) (2.88) 64 (2.52) 78 (3.07) 73.3 (2.88) OMEDB (2.28) 5 to 50 Vdc V CH V CH0.8 CH CH 58 (2.28) (0.42) (2.52) (0.42)CH 5 (0.5) CH CH CH Digital Output Readback as 5 to 50 Vdc Open Collector () 5 to 50 Vdc Model No. OMEET70Z OMEPET70Z RAI5 idrnps000 OMESW05 OMESW05POE 5 (0.5) 0.8 (0.42) 5 (0.5) 5 to 50 Vdc CH CH CH 5 to 50 Vdc 5 to 50 Vdc 5 (0.5) 5 (0.5) 0.8 (0.42) Left side view 2.8 (0.5) CH0.8 (0.42) 2.8 (0.5) Bottom view 0.8 (0.42) 65 ( (0.5) 2.8 (0.5) 2.8 (0.5) 2.8 (0.5) 2.8 (0.5) Top view OFF State Readback as 0 5 to 50 Vdc Description 0channel thermocouple input module with OMEDB820 daughter board 0channel thermocouple input module with OMEDB820 daughter board with PoE mm (.4") DIN rail, m (3.3') length DIN rail power supply, 5 to 240 Vac input, 24 Vdc output at 850 ma 5port unmanaged ethernet switch 5port POE ethernet switch (four 0/00 base TX ports with POE and one 0/00 base TX uplink port) Comes complete with wall mount bracket, quick start guide, utility software and operator s manual on CD. Ordering Example: OMEET70Z 0channel thermocouple input module with OMEDB820 daughter board and OCW OMEGACARESM extends standard year warranty to a total of 2 years (0.42) (0.42) (0.5) 5 ( (0.42) 5 65 (0.5) (2.55) 0.8 (0.42) Rear view 0.8 (0.42) 5 (0.5) CH 5 (0.5) 0.8 (0.42) CH0.8 (0.42) 6 (4.56) 6578 (2.55) (3.07) (2.55) 65 (.37) (2.88) 3.5 (2.55) 2.8 (.55) (0.5) CH 2.8 (0.5) 2.8 CH(0.5) Vdc 5 to 50 5 to 50 Vdc Bottom view (2.52)(2.55) CH5 (0.5) 3.5 (.55) 58 (2.28) 0.8 (0.42) (0.5) (0.42) (0.42) 78 5 (0.5) (3.07) (0.5) 73.3 CH (2.88) OMEDB820 2 (0.8 (.37) (.37) (.37) (.37) Front view 64 (2.52) 64 (2.52) 64 (2.52) CH CH CHCH CHCH Input (Default) Rear view 3.5 CH(.55) Current Input 58 (2.28) 64 (2.52) 33 (.3) 72.0 (2.83) (.55) (.55) DIN rail(.55) mounting bracket (.37) 2SCREW 6 M3 (4.56) OMEDB (2.28) 58 (2.28) 64 (2.52) 58 (2.28) Wire M3Connections 3.5 (.55) Top view 78 (3.07) (3.07) (3.07) (2.88) (4.56) (2.88) (2.88) (.37) 2SCREW M3 OMEDB820 OMEDB820 (.37) (.37) (.37) 3.5 (.24) Right side view 6 (4.56) 6 33 (.3) (4.56) (2.83) (4.56) (.24) OMEDB820 DO2 DO3 DO DO0 33 (.3) 72.0 (2.83) 33 (.3) (.3) 72.0 (2.83) 33 2SCREW 72.0 (2.83) M3 (.37) (.24) (.24) 2SCREW M3 2SCREW 2SCREW M3 M3 Front view (.37) L 33 (.3) 72.0 (2.83) 33 (.3) 33 (.3) (2.83) (2.83) (.37) (.37) (.37) CON 3.5 (.24) Dimensions: mm (inch)

19 Multifunction Analog/Digital I/O Modules OMEET7026/OMEPET7026 U BuiltIn Web Server U Web HMI U Support for Both Modbus TCP and Modbus UDP Protocols U Communication Security U Dual Watchdog U Wide Operating Temperature Range: 25 to 75 C (3 to 67 F) U I/O Pair Connection U BuiltIn I/O AI: 6 Channels with 240 Vrms Overvoltage AO: 2 Channels DI/Counter: 2 Channels DO: 2 Channels Applications U Building Automation U Factory Automation Wire Connections U Machine Automation U Remote Maintenance U Remote Diagnosis mv/v V U Testing Equipment Voltage Input OMEPET7026 shown smaller than actual size. JUMPER Default The OMEET7026/OMEPET7026 is a webbased Ethernet I/O module that features a builtin web server which allows remote configuration, I/O monitoring and I/O control simply by using a regular web browser. Remote control is as easy as browsing the Internet. In addition, the web HMI function means that programming or HTML skills are no longer required so creating dynamic and attractive web pages for I/O monitoring and I/O control purposes is easy. The OMEET7026/ OMEPET7026 offers easy and safe access for users at anytime and from any location, and also supports the Modbus TCP protocol that ensures perfect integration with SCADA software. Furthermore, the OMEPET7026 features PoE, meaning that not only is data transmitted through an Ethernet cable but also power making installation of the OMEPET7026 easy. No more unnecessary wires with only an Ethernet cable being required to take care of everything in the field. The OMEET7026/OMEPET7026 is a multifunction module; there are 6channel analog inputs, 2channel analog output, 2channel digital inputs and 2channel digital outputs. It provides programmable input range on all analog inputs (±500 mv, ± V, ±5 V, ±0 V, ±20 ma, 0 to 20 ma and 4 to 20 ma), analog outputs are 2 bit with ±5 V, ±0 V, 0 to 20 ma and 4 to 20 ma and digital output can be set as alarm output. Each analog input is allowed to configure an individual range and has 240 Vrms high overvoltage protection. Modules are jumper selectable for voltage or current inputs/outputs. Digital Input/ Counter Dry Contact Digital Output Open Collector () ma Load Load Current Input Vin Vin Vin Vin Voltage Output v Vout Current Output Readback as Readback as 5 to 50 Vdc Vout DIx ISO GND JUMPER Default OFF State Readback as 0 DIx ISO GND OFF State Readback as 0 5 to 50 Vdc SM or Shop Online at omega.com

20 20 Vout0 Vin5 Vin5 Vin4 Vin4 Vin3 Vin3 Vin2 Vin2 Vin Vin Vin0 Vin0 System Specifications Models OMEET7026 L OMEPET7026 Software Builtin Web ET7026 Server Web HMI I/O Pair Connection Communication Ethernet Port 0/00 basetx with auto MDI/MDIX PoE Protocol Modbus TCP, Modbus UDP Security ID, password and IP filter Dual Watchdog, module (0.8 seconds), communication (programmable) LED Indicators L (System Running) (Ethernet Link/Act) (Ethernet 0/00 M Speed) PoE Power 2Way Isolation Ethernet 500 Vdc I/O 2500 Vdc 2500 Vdc EMS ESD 4 kv contact for each terminal and (IEC ) 8 kv air for random point EFT ±4 kv for power (IEC ) Power Requirements Reverse Polarity Powered from, 0 to 30 Vdc, 2 to 48 Vdc Terminal Block Powered from PoE Consumption 3. W 4.2 W Mechanical Dimensions (W x L x D) Installation Environment Operating Temperature Storage Temperature Humidity Vout DI0 DI DO0 DO (R)Vs Pin Assignments 0 (R)Vs, IEEE 802.3af, class 72 x x mm (2.83 x 4.84 x.37") DINrail or wall mounting 25 to 75 C (3 to 67 F) 30 to 80 C ( to 76 F) 0 to 0% RH, noncondensing Model No. Description OMEET7026 Multifunction analog/digital I/O module OMEPET7026 Multifunction analog/digital I/O PoE module RAI5 mm (.4") DIN rail, m (3.3') length idrnps000 DIN rail power supply, 5 to 240 Vac input, 24 Vdc output at 850 ma OMESW05 5port unmanaged ethernet switch 5port POE ethernet switch (four 0/00 OMESW05POE base TX ports with POE and one 0/00 base TX uplink port) Comes complete with wall mount bracket, quick start guide, utility software and operator s manual on CD. Ordering Example: OMEET7026 multifunction analog/digital I/O module and OCW OMEGACARE SM extends standard year warranty to a total of 2 years. Vout DI0 DI DO0 DO I/O Specifications Analog Input Channels 6 (differential) ±500 mv, ±V, ±5 V, ±0 V Type 0 to 20 ma, ±20 ma, 4 to 20 ma (jumper selectable) Individual Channel Configuration Resolution Normal Mode 6bit Fast Mode 2bit Sampling Normal Mode 0 samples/second (total) Rate Fast Mode 60 samples/second (total) Accuracy Normal Mode ±0.% Fast Mode ±0.5% or better Zero Drift ±20 μv/ C Span Drift ±25 ppm/ C Overvoltage 240 Vrms Input Impedance 2 MΩ Common Mode Rejection 86 db minimum Normal Mode Rejection 00 db Analog Output Channels 2 0 to 5 Vdc, ±5 Vdc, 0 Vdc to Type 0 Vdc, ±0 Vdc, 0 to 20 ma, 4 to 20 ma (jumper selectable) Individual Channel Configuration Resolution 2bit Accuracy ±0.% of FSR Voltage Output Capability 20 0 V Current Load Resistance 500 Ω Open Wire Detection, for 4 to 20 ma only Poweron Value, programmable Safe Value, programmable Digital Input/Counter Channels 2 On Voltage Level Close to GND Dry Off Voltage Level Open Contact Effective () Distance for Dry 500 M maximum Wet contact (/ ) Contact On Voltage Level Off Voltage Level Vdc maximum 3.5 to 30 Vdc Channels 2 Maximum Count 4,24,67,285 (32bit) Counters Maximum Input Frequency 00 Hz Minimum Pulse Width 5 ms Overvoltage 30 Vdc Digital Output Channels 2 Type Isolated open collector / (NPN/PNP) Maximum Load Current 700 ma/channel Load Voltage 5 to 50 Vdc Overvoltage 60 Vdc Overload.4 A ShortCircuit Poweron Value, programmable Safe Value, programmable

21 6Channel Isolated Digital Output Modules OMEET7042/OMEPET7042 U BuiltIn Web Server U Web HMI U Support for both Modbus TCP and Modbus UDP Protocols U Communication Security U Dual Watchdog U Wide Operating Temperature Range: 25 to 75 C (3 to 67 F) U I/O Pair Connection U BuiltIn I/O DO: 6 Channels Applications U Building Automation U Factory Automation U Machine Automation U Remote Maintenance U Remote Diagnosis U Testing Equipment OMEET7042 shown actual size. OMEPET7042 shown actual size. The OMEET7042/OMEPET7042 is a webbased Ethernet digital output module that features a builtin web server which allows configuration, I/O monitoring and I/O control by simply using a web browser. Using the web HMI function, no more programming or HTML skills are required. The user can create dynamic and attractive web pages easily. The module offers easy and safe access for users at anytime and from any location. It also supports Modbus TCP protocol that makes perfect integration to SCADA software. The module provides 6 sinktype digital output. It features optical isolation for 3750 Vrms of transient overvoltage protection and doesn t have channeltochannel isolation. The poweron value and safe value of digital output channel are programmable. SM or Shop Online at omega.com 2

22 I/O Specifications Models OMEET7042 OMEPET7042 System Specifications Models OMEET7042 OMEPET7042 Software Builtin Web Server Web HMI I/O Pair Connection Communication Ethernet Port 0/00 basetx with auto MDI/ MDIX PoE Protocol Modbus TCP, Modbus UDP Security ID, password and IP filter Dual Watchdog, module (0.8 seconds), communication (programmable) LED Indicators L (System Running) (Ethernet Link/Act) (Ethernet 0/00 M Speed) PoE Power 2Way Isolation Ethernet 500 Vdc I/O 3750 Vrms 3750 Vrms EMS ESD (IEC ) 4 kv contact for each Output terminal Type Output Type EFT (IEC ) ±2 kv for power Power Requirements Drive Relay Drive Relay Reverse Polarity Powered from Terminal Block, 0 to 30 Vdc, 2 to 48 Vdc Resistance Powered from PoE, Resistance IEEE Load 802.3af, Loadclass Consumption 2.7 W 3.0 W Mechanical Dimensions (W x L x D) 72 x x mm (2.83 x 4.84 x.37") Installation DINrail or wall mounting Environment Operating Temperature 25 to 75 C (3 to 67 F) Storage Temperature 30 to 80 C ( to 76 F) Humidity 0 to 0% RH, noncondensing Digital Output Channels 6 Type Isolated open collector / (NPN/PNP) Maximum Load Current Load Voltage Overvoltage Overload Shortcircuit Poweron Value Safe Value Wire Connections Output Type Output Type Drive Relay Drive Relay Output Type Readback as Readback as Readback as Readback as Readback as Drive Delay Resistance Load Resistance Resistance Load Load 00 ma/channel at 25 C direct drive power relay module 5 Vdc to 30 Vdc 60 Vdc.3 A, programmable, programmable DO DO0 DO DO8 DO7 DO6 DO5 DO4 DO3 DO2 DO DO0 ET7042 Pin Assignments OMEET DO DO0 DO DO8 DO7 DO6 DO5 DO4 DO3 DO2 DO DO0 DO DO0 DO DO8 DO7 DO6 DO5 DO4 DO3 DO2 DO DO0 0 OFF State Readback as 0 OFF State OFF State OFF State Readback as Readback as 0 Readback OFF State as 0 Readback as 0 L 0 To Order Visit omega.com/omeet7000_omepet7000 for Pricing and Details Model No. OMEET7042 OMEPET7042 RAI5 idrnps000 Description 6channel isolated digital output module 6channel isolated digital output module with PoE mm (.4") DIN rail, m (3.3') length DIN rail power supply, 5 to 240 Vac input, 24 Vdc output at 850 ma OMESW05 5port unmanaged ethernet switch 5port POE ethernet switch (four OMESW05POE 0/00 base TX ports with POE and one 0/00 base TX uplink port) Comes complete with wall mount bracket, quick start guide, utility software and operator s manual on CD. Ordering Example: OMEET7042 6channel isolated digital output module and OCW OMEGACARE SM extends standard year warranty to a total of 2 years. PET7042 DO2 DO2 DO3 DO3 DO4 DO5 ET7042 DO5 OMEPET7042 (R)Vs DO2 DO3 DO4 DO5 2 2 (R)Vs DO4 (R)Vs L L 0 DO DO0 DO DO8 DO7 DO6 DO5 DO4 DO3 DO2 DO DO0 PET7042 L

23 8Channel DI and 8Channel Isolated Digital Output Modules OMEET7044/OMEPET7044 U BuiltIn Web Server U Web HMI U Support for both Modbus TCP and Modbus UDP Protocols U Communication Security U Dual Watchdog U Wide Operating Temperature Range: 25 to 75 C (3 to 67 F) U I/O Pair Connection U BuiltIn I/O DI/Counter: 8 Channels DO: 8 Channels Applications U Building Automation U Factory Automation U Machine Automation U Remote Maintenance U Remote Diagnosis U Testing Equipment OMEET7044 shown smaller than actual size. The OMEET7044/OMEPET7044 is a webbased Ethernet digital I/O module that features a builtin web server which allows configuration, I/O monitoring and I/O control by simply using a web browser. Using the web HMI function, no more programming or HTML skills are required. The user can create dynamic and attractive web pages easily. The module offers easy and safe access for users at anytime and from any location. It also supports Modbus TCP protocol that makes perfect integration to SCADA software. Wire Connections Digital Input/Counter Readback as Readback as 0 Digital as Readback as 0 Digital Input/Counter Digital DigitalInput/Counter Digital Input/Counter Output Type Output Type Output Output Type Type Output Type Drive Relay Resistance Load Load Drive Drive Relay Relay Drive Relay Resistance Resistance Load Drive Relay Resistance Load Readback Readback as Readback as 0 as as Readback as 0 0 ~ 50 VDC Readback as OPEN or <4 VDC Readback as 0 0 ~ 50 VDC OPEN or <4 VDC 0K 0K 0K 0K 0K 0K 0K 0K 0K 0K 0 ~ 50 0 to 0 VDC OPEN or <4 VDC 0 Vdc ~ 50 VDC 50 VDC Open OPEN or or <4 VDC VDC < 4 Vdc To other To To other 0 ~ 50 VDC OPEN or <4 VDC 0 0 to ~ 50 0 VDC Vdc 0 ~ 50 VDC OPEN or Open <4 VDC ~ 50 VDC VDC OPEN OPEN or or <4 or VDC VDC < <4 4 VDCVdc 0K 0K 0K 0K To other Readback as Readback as Readback Readback as as The module provides 8 wet contact digital input and 8 sinktype digital output. It features optical isolation for 3750 Vrms of transient overvoltage protection but doesn t provide channeltochannel isolation. Each input channel can be used as a 32bit counter and each output channel can drive 300 ma load. The poweron value and safe value of digital output channel are programmable. It can safely be used in applications where hazardous voltages are present. 0K 0K 0K 0K To other OFF OFF State State OFF Readback State as as 0 0 OFF OFF State State Readback Readback as as 00 as 0 SM or Shop Online at omega.com

24 System Specifications Models OMEET7044 OMEPET7044 Software Builtin Web Server Web HMI I/O Pair Connection Communication Ethernet Port 0/00 basetx with auto MDI/ MDIX PoE Protocol Modbus TCP, Modbus UDP Security ID, password and IP filter Dual Watchdog, module (0.8 seconds), communication (programmable) LED Indicators L (System Running) (Ethernet Link/Act) (Ethernet 0/00 M Speed) PoE Power 2Way Isolation Ethernet 500 Vdc I/O 3750 Vdc 3750 Vdc EMS ESD (IEC ) 4 kv contact for each terminal EFT (IEC ) ±2 kv for power Power Requirements Reverse Polarity Powered from Terminal Block, 0 to 30 Vdc Powered from PoE, 2 to 48 Vdc, IEEE 802.3af, class Consumption 2.4 W 3.0 W Mechanical Dimensions (W x L x D) 72 x x mm (6.77 x 4.84 x.38") Installation Environment Operating Temperature Storage Temperature Humidity DINrail or wall mounting 25 to 75 C (3 to 67 F) 30 to 80 C ( to 76 F) 0 to 0% RH, noncondensing I/O Specifications Digital Input/Counter Channels 8 Contact Wet contact / (NPN/PNP) /source On Voltage Level 0 to 50 Vdc Off Voltage Level 4 Vdc maximum Input Impedance 0 kω Maximum Count 4,24,67,285 (32 bits) Counters Maximum Input Frequency 500 Hz IN2 IN IN0 DO7 DO6 DO5 DO4 DO3 DO2 DO DO0 Minimum Pulse Width ms Overvoltage 70 Vdc Digital Output Channels 8 Type Isolated open collector / (NPN/PNP) Maximum Load Current 300 ma/channel at 25 C L (77 F) direct drive power relay module Load Voltage 0 to 40 Vdc Overvoltage ET Vdc Overload. A Shortcircuit Poweron Value, programmable Safe Value, programmable Pin Assignments IN2 IN IN0 DO7 DO6 DO5 DO4 DO3 DO2 DO DO0 ET IN3 IN4 IN5 IN6 IN7 2 (R)Vs L To Order Visit omega.com/omeet7000_omepet7000 for Pricing and Details Model No. OMEET7044 OMEPET7044 RAI5 idrnps000 OMESW05 Description 8channel DI and 8channel DO module 8channel DI and 8channel DO module with PoE mm (.4") DIN rail, m (3.3') length DIN rail power supply, 5 to 240 Vac input, 24 Vdc output at 850 ma 5port unmanaged ethernet switch OMESW05POE 5port POE ethernet switch (four 0/00 base TX ports with POE and one 0/00 base TX uplink port) Comes complete with wall mount bracket, quick start guide, utility software and operator s manual on CD. Ordering Example: OMEET7044 8channel DI and 8channel DO module and OCW OMEGACARE SM extends standard year warranty to a total of 2 years. 24 IN3 IN4 IN5 IN6 IN7 2 (R)Vs

25 2Channel DI and 6Channel Isolated Digital Output Modules OMEET7050/OMEPET7050 U BuiltIn Web Server U Web HMI U Support for both Modbus TCP and Modbus UDP Protocols U Communication Security U Dual Watchdog U Wide Operating Temperature Range: 25 to 75 C (3 to 67 F) U I/O Pair Connection U BuiltIn I/O DI/Counter: 2 Channels DO: 6 Channels Applications U Building Automation U Factory Automation U Machine Automation U Remote Maintenance U Remote Diagnosis U Testing Equipment OMEET7050 shown smaller than actual size. The OMEET7050/OMEPET7050 is a webbased Ethernet digital I/O module that features a builtin web server which allows configuration, I/O monitoring and I/O control by simply using a web browser. Using the web HMI function, no more programming or HTML Wire Connections Digital Input/Counter Readback as Readback as 0 Digital Input/Counter Digital Input/Counter Output Type Output Type Output Type Drive Relay Drive Relay Readback as Readback as 0 0 Readback to 50 as as Vdc Open Readback or as as < 04 Vdc 0 ~ 50 VDC OPEN or <4 VDC 0 0K ~ 50 VDC VDC OPEN or or 0K <4 <4 VDC VDC 0K 0K 0K 0K To To other To To other 0 to 0 50 ~ 50 Vdc VDC Open OPEN or <4 < VDC 4 Vdc 0 ~ 50 VDC VDC OPEN or or <4 <4 VDC VDC 0K 0K 0K 0K 0K To other To To other ON ON Readback State as Readback as as skills are required. The user can create dynamic and attractive web pages easily. The module offers easy and safe access for users at anytime and from any location. It also supports Modbus TCP protocol that makes perfect integration to SCADA software. To To other OFF State OFF Readback State as as 0 0 Readback as as 0 Resistance Resistance Load Load SM or Shop Online at omega.com 25

26 L ET7050 The module provides 2 wet contact digital input and 6 sinktype digital output. It features optical isolation for 3750 Vrms of transient overvoltage protection but doesn t provide channeltochannel isolation. Each input channel can be used as a 32bit counter and each output channel can drive 00 ma load. The poweron value and safe value of digital output channel are programmable. System Specifications Models OMEET7050 OMEPET7050 Software Builtin Web Server Web HMI I/O Pair Connection Communication Ethernet Port 0/00 basetx with auto MDI/ MDIX PoE Protocol Modbus TCP, Modbus UDP Security ID, password and IP filter Dual Watchdog, module (0.8 seconds), communication (programmable) LED Indicators L (System Running) (Ethernet Link/Act) (Ethernet 0/00 M Speed) PoE Power 2Way Isolation Ethernet 500 Vdc I/O 3750 Vrms 3750 Vrms EMS ESD (IEC ) 4 kv contact for each terminal EFT (IEC ) ±2 kv for power Power Requirements Reverse Polarity Powered from Terminal Block, 0 to 30 Vdc, 2 to 48 Vdc Powered from PoE, IEEE 802.3af, class Consumption 2.4 W 3.0 W Mechanical Dimensions (W x L x D) 72 x x mm (2.83 x 4.84 x.37") Installation DINrail or wall mounting Environment Operating Temperature 25 to 75 C (3 to 67 F) Storage Temperature 30 to 80 C ( to 76 F) Humidity 0 to 0% RH, noncondensing Pin Assignments IN5 IN4 IN3 IN2 IN IN0 DO5 DO4 DO3 DO2 DO DO0 I/O Specifications IN6 IN7 IN8 IN IN0 IN (R)Vs Models OMEET7050 OMEPET7050 Digital Input/Counter Channels 2 Contact Wet contact / (NPN/PNP) /source On Voltage Level 0 to 50 Vdc Off Voltage Level 4 Vdc maximum Input Impedance 0 kω Maximum Count 4,24,67,285 (32 bits) Counters Maximum Input 500 Hz Frequency Minimum Pulse Width ms Overvoltage 70 Vdc Digital Output Channels 6 Type Isolated open collector / (NPN/PNP) Maximum Load Current 00 ma/channel at 25 C (77 F) Direct drive power relay module Load Voltage 5 to 30 Vdc Overvoltage 60 Vdc Overload.3 A Shortcircuit Poweron Value, programmable Safe Value, programmable ET L IN6 IN7 IN8 IN IN0 IN (R)Vs Model No. OMEET7050 Description 2channel DI and 6channel DO module OMEPET7050 2channel DI and 6channel DO module with PoE RAI5 mm (.4") DIN rail, m (3.3') length idrnps000 DIN rail power supply, 5 to 240 Vac input, 24 Vdc output at 850 ma OMESW05 5port unmanaged ethernet switch OMESW05POE 5port POE ethernet switch (four 0/00 base TX ports with POE and one 0/00 base TX uplink port) Comes complete with wall mount bracket, quick start guide, utility software and operator s manual on CD. Ordering Example: OMEET7050 2channel DI and 6channel DO module and OCW OMEGACARE SM extends standard year warranty to a total of 2 years. 26

27 6Channel Isolated Digital Input Modules OMEET705/OMEPET705 U BuiltIn Web Server U Web HMI U Support for Both Modbus TCP and Modbus UDP Protocols U Communication Security U Dual Watchdog U Wide Operating Temperature Range: 25 to 75 C (3 to 67 F) U I/O Pair Connection U BuiltIn I/O DI/Counter: 6 Channels Applications U Building Automation U Factory Automation U Machine Automation U Remote Maintenance U Remote Diagnosis U Testing Equipment The OMEET705/OMEPET705 is a webbased Ethernet digital input module that features a builtin web server which allows configuration, I/O monitoring and I/O control by simply using a web browser. Using the web HMI function, no more programming or HTML skills are required. The user can create dynamic and attractive web pages easily. The module offers easy and safe access for users at anytime and from any location. It also supports Modbus TCP protocol that makes perfect integration to SCADA software. The module provides 6 wet contact digital input. Each input channel can be used as a 32bit counter. It features optical isolation for 3750 Vrms of transient overvoltage protection but doesn t provide channeltochannel isolation. It can safely be used in applications where hazardous voltages are present. OMEET705 shown actual size. Wire Connections Digital Input/Counter Readback as Readback as 0 0 to 50 Vdc Open or < 4 Vdc 0K 0K 0 to 50 Vdc Open or < 4 Vdc 0K 0K SM or Shop Online at omega.com 27

28 System Specifications Models OMEET705 OMEPET705 Software Builtin Web Server Web HMI I/O Pair Connection Communication Ethernet Port 0/00 basetx with auto MDI/ MDIX PoE Protocol Modbus TCP, Modbus UDP Security ID, password and IP filter Dual Watchdog, module (0.8 seconds), communication (programmable) LED Indicators L (System Running) (Ethernet Link/Act) (Ethernet 0/00 M Speed) PoE Power 2Way Isolation Ethernet 500 Vdc I/O 3750 Vrms 3750 Vrms EMS ESD (IEC ) 4 kv contact for each terminal EFT (IEC ) ±2 kv for power Power Requirements Reverse Polarity Powered from Terminal Block, 0 to 30 Vdc, 2 to 48 Vdc Powered from PoE, IEEE 802.3af, class Consumption 2.4 W 3.0 W Mechanical Dimensions (W x L x D) 72 x x mm (2.83 x 4.84 x.37") Installation DINrail or wall mounting Environment Operating Temperature 25 to 75 C (3 to 67 F) Storage Temperature 30 to 80 C ( to 76 F) Humidity 0 to 0% RH, noncondensing I/O Specifications Digital Input/Counter Channels 6 Contact Wet contact / (NPN/PNP) /source On Voltage Level 0 to 50 Vdc Off Voltage Level 4 Vdc maximum Input Impedance 0 kω Maximum Count 4,24,67,285 (32 bits) Maximum Input Counters Frequency 500 Hz L Minimum Pulse ms Width Overvoltage 70 Vdc IN2 IN IN0 IN IN8 IN7 IN6 IN5 IN4 IN3 IN2 IN IN0 Pin Assignments PET705 0 IN2 IN IN0 IN IN8 IN7 IN6 IN5 IN4 IN3 IN2 IN IN0 0 IN3 IN4 IN5 2 (R)Vs PET705 L To Order Visit omega.com/omeet7000_omepet7000 for Pricing and Details Model No. Description OMEET705 6channel isolated digital input module OMEPET705 6channel isolated digital input module with PoE RAI5 mm (.4") DIN rail, m (3.3') length idrnps000 DIN rail power supply, 5 to 240 Vac input, 24 Vdc output at 850 ma OMESW05 5port unmanaged ethernet switch OMESW05POE 5port POE ethernet switch (four 0/00 base TX ports with POE and one 0/00 base TX uplink port) Comes complete with wall mount bracket, quick start guide, utility software and operator s manual on CD. Ordering Example: OMEET705 6channel isolated digital input module and OCW OMEGACARE SM extends standard year warranty to a total of 2 years. IN3 IN4 IN5 2 (R)Vs 28

29 8Channel DI and 8Channel DO Modules OMEET7052/OMEPET7052 U BuiltIn Web Server U Web HMI U Support for Both Modbus TCP and Modbus UDP Protocols U Communication Security U Dual Watchdog U Wide Operating Temperature Range: 25 to 75 C (3 to 67 F) U I/O Pair Connection U BuiltIn I/O DI/Counter: 8 Channels DO: 8 Channels Applications U Building Automation U Factory Automation U Machine Automation U Remote Maintenance U Remote Diagnosis U Testing Equipment The OMEET7052/OMEPET7052 is a webbased Ethernet digital I/O module that features a builtin web server which allows configuration, I/O monitoring and I/O control by simply using a web browser. Using the web HMI function, no more programming or HTML skills are required. The user can create dynamic and attractive web pages easily. The module offers easy and safe access for users at anytime and from any location. It also supports Modbus TCP protocol that makes perfect integration to SCADA software. Wire Connections Digital Input/Counter Readback as Readback as 0 Digital Input/Counter Digital Input/Counter 0 to 50 Vdc Readback as 0 Open or < 0 4 Vdc Digital Output Digital Output Digital Output 0 ~ 50 VDC 0 ~ 50 VDC OPEN or <4 VDC OPEN or <4 VDC 0K 0K 0K 0K 0K 0K To other To other 0 to 50 Vdc Open or < 4 Vdc 0 ~ 50 VDC 0 ~ 50 VDC OPEN or <4 VDC OPEN or <4 VDC 0K 0K 0K 0K 0K 0K To other Readback as Readback as Readback as OFF State Readback as 0 To other OFF State OFF State Readback as 0 Readback as 0 OMEET7052 shown actual size. The module provides 8 wet contact digital input and 8 sourcetype digital output. It features optical isolation for 3750 Vrms of transient overvoltage protection but doesn t provide channeltochannel isolation. Each input channel can be used as a 32bit counter and each output channel can drive 650 ma load. The poweron value and safe value of digital output channel are programmable. It can safely be used in applications where hazardous voltages are present. Inverse protection Inverse protection Inverse protection Inverse protection Load Fuse Overvoltage Load Fuse ESD Overvoltage ESD Current 0KCurrent Limit Limit Load 0K Fuse Overvoltage Load Fuse ESD Overvoltage Current Limit ESD 0KCurrent Limit 0K SM or Shop Online at omega.com 2

30 System Specifications Models OMEET7052 OMEPET7052 Software Builtin Web Server Web HMI I/O Pair Connection Communication Ethernet Port 0/00 basetx with auto MDI/MDIX PoE Protocol Modbus TCP, Modbus UDP Security ID, password and IP filter Dual Watchdog, module (0.8 seconds), communication (programmable) LED Indicators L (System Running) (Ethernet Link/Act) (Ethernet 0/00 M Speed) PoE Power 2Way Isolation Ethernet 500 Vdc I/O 3750 Vrms 3750 Vrms EMS ESD (IEC ) 4 kv contact for each terminal EFT (IEC ) ±2 kv for power Power Requirements Reverse Polarity Powered from Terminal Block, 0 to 30 Vdc, 2 to 48 Vdc Powered from PoE, IEEE 802.3af, class Consumption 2.4 W 3.0 W Mechanical Dimensions (W x L x D) 72 x x mm (2.83 x 4.84 x.37") Installation DINrail or wall mounting Environment Operating Temperature 25 to 75 C (3 to 67 F) Storage Temperature 30 to 80 C ( to 76 F) Humidity 0 to 0% RH, noncondensing I/O Specifications Digital Input/Counter Channels 8 Contact Wet contact / (NPN/PNP) /source On Voltage Level 0 to 50 Vdc Off Voltage Level 4 Vdc maxmium Input Impedance 0 kω Maximum Count 4,24,67,285 (32 bits) Counters Maximum Input 500 Hz Frequency Minimum Pulse Width ms Overvoltage 70 Vdc Digital Output Channels 8 Type Isolated open collector / (NPN/PNP) Max. Load Current 650 ma/channel at 25 C L Load Voltage 0 to 40 Vdc Overvoltage 47 Vdc Overload ET7052 Shortcircuit Poweron Value, programmable Safe Value, programmable IN2 IN IN0 DO7 DO6 DO5 DO4 DO3 DO2 DO DO0 Pin Assignments IN3 IN4 IN5 IN6 IN7 2 IN.GND (R)Vs 0 IN2 IN IN0 DO7 DO6 DO5 DO4 DO3 DO2 DO DO0 0 L ET7052 To Order Visit omega.com/omeet7000_omepet7000 for Pricing and Details Model No. Description OMEET7052 8channel DI and 8channel DO module OMEPET7052 8channel DI and 8channel DO module with PoE RAI5 mm (.4") DIN rail, m (3.3') length idrnps000 DIN rail power supply, 5 to 240 Vac input, 24 Vdc output at 850 ma OMESW05 5port unmanaged ethernet switch OMESW05POE 5port POE ethernet switch (four 0/00 base TX ports with POE and one 0/00 base TX uplink port) Comes complete with wall mount bracket, quick start guide, utility software and operator s manual on CD. Ordering Example: OMEET7052 8channel DI and 8channel DO module and OCW OMEGACARE SM extends standard year warranty to a total of 2 years. 30 IN3 IN4 IN5 IN6 IN7 2 IN.GND (R)Vs

31 6Channel Isolated Digital Input Modules OMEET7053/OMEPET7053 U BuiltIn Web Server U Web HMI U Support for Both Modbus TCP and Modbus UDP Protocols U Communication Security U Dual Watchdog U Wide Operating Temperature Range: 25 to 75 C (3 to 67 F) U I/O Pair Connection U BuiltIn I/O DI/Counter: 6 Channels Applications U Building Automation U Factory Automation U Machine Automation U Remote Maintenance U Remote Diagnosis U Testing Equipment OMEET7053 shown actual size. The OMEET7053/OMEPET7053 is a webbased Ethernet digital input module that features a builtin web server which allows configuration, I/O monitoring and I/O control by simply using a web browser. Using the web HMI function, no more programming or HTML skills are required. The user can create dynamic and attractive web pages easily. The module offers easy and safe access for users at anytime and from any location. It also supports Modbus TCP protocol that makes perfect integration to SCADA software. The module provides 6 dry contact digital input. Each input channel can be used as a 32bit counter. It features optical isolation for 3750 Vrms of transient overvoltage protection but doesn t provide channeltochannel isolation. It can safely be used in applications where hazardous voltages are present. Wire Connections Digital Input/Counter Readback as OFF State Readback as 0 Dry Contact Relay Open IN.GND Relay Close IN.GND SM or Shop Online at omega.com 3

32 System Specifications Models OMEET7053 OMEPET7053 Software Builtin Web Server Web HMI I/O Pair Connection Communication Ethernet Port 0/00 basetx with auto MDI/MDIX PoE Protocol Modbus TCP, Modbus UDP Security ID, password and IP filter, Module Dual Watchdog (0.8 seconds), communication (programmable) LED Indicators L (System Running) (Ethernet Link/Act) (Ethernet 0/00 M Speed) PoE Power 2Way Isolation Ethernet 500 Vdc I/O 3750 Vrms 3750 Vrms EMS ESD (IEC ) 4 kv contact for each terminal EFT (IEC ) ±2 kv for power Power Requirements Reverse Polarity Powered from,, Terminal Block 0 to 30 Vdc 2 to 48 Vdc Powered from PoE, IEEE 802.3af, class Consumption 2.4 W 3.0 W Mechanical Dimensions (W x L x D) Installation Environment Operating Temperature Storage Temperature Humidity 72 x x mm (2.83 x 4.84 x.37") DINrail or wall mounting 25 to 75 C (3 to 67 F) 30 to 80 C ( to 76 F) 0 to 0% RH, noncondensing I/O Specifications Digital Input/Counter Channels 6 Contact Dry contact / (NPN/PNP) On Voltage Level Open Off Voltage Level Close to GND Maximum Count 4,24,67,285 (32 bits) Counters Maximum Input Frequency 500 Hz Minimum L ms Pulse Width Overvoltage ET7053 Effective Distance Pin Assignments OMEET7053 OMEPET7053 IN2 IN IN0 IN IN8 IN7 IN6 IN5 IN4 IN3 IN2 IN IN0 IN.GND M maximum IN2 IN IN0 IN IN8 IN7 IN6 IN5 IN4 IN3 IN2 IN IN0 IN.GND IN2 IN IN0 IN IN8 IN7 IN6 IN5 IN4 IN3 IN2 IN IN0 IN.GND IN3 IN4 IN5 IN.GND (R)Vs ET L IN2 IN IN0 IN IN8 IN7 IN6 IN5 IN4 IN3 IN2 IN IN0 IN.GND PET7053 PET L 0 IN3 IN4 IN5 IN.GND2 (R)Vs L IN3 IN4 IN5 IN.GND (R)Vs To Order Visit omega.com/omeet7000_omepet7000 for Pricing and Details Model No. Description OMEET7053 6channel isolated digital input module OMEPET7053 6channel isolated digital input module with PoE RAI5 mm (.4") DIN rail, m (3.3') length idrnps000 DIN rail power supply, 5 to 240 Vac input, 24 Vdc output at 850 ma OMESW05 5port unmanaged ethernet switch OMESW05POE 5port POE ethernet switch (four 0/00 base TX ports with POE and one 0/00 base TX uplink port) Comes complete with wall mount bracket, quick start guide, utility software and operator s manual on CD. Ordering Example: OMEET7053 6channel isolated digital input module and OCW OMEGACARE SM extends standard year warranty to a total of 2 years. IN3 IN4 IN5 IN.GND2 (R)Vs 32

33 6Channel Power Relay Output and DI Modules OMEET7060/OMEPET7060 U BuiltIn Web Server U Web HMI U Support for Both Modbus TCP and Modbus UDP Protocols U Communication Security U Dual Watchdog U Wide Operating Temperature Range: 25 to 75 C (3 to 67 F) U I/O Pair Connection U BuiltIn I/O DI/Counter: 6 Channels Power Relay: 6 Channels Applications U Building Automation U Factory Automation U Machine Automation U Remote Maintenance U Remote Diagnosis U Testing Equipment OMEPET7060 shown actual size. Wire Connections Digital Input/ Counter Readback as Readback as 0 0 to 50 Vdc OPEN or <4 Vdc 0K 0K OMEET7060/OMEPET7060 is a webbased ethernet digital I/O module that features a builtin web server which allows configuration, I/O monitoring and I/O control by simply using a web browser. Using the web HMI function, no more programming or HTML skills are required. The user can create dynamic and attractive web pages easily. The module offers easy and safe access for users at anytime and from any location. It also supports Modbus TCP protocol that makes perfect integration to SCADA software. The module provides 6 wet contact digital input and 6 form A electromechanical relays. It features optical isolation for 3000 Vrms of transient overvoltage protection and doesn t have channeltochannel isolation. Each input channel can be used as a 32bit counter. The poweron value and safe value of relay are programmable. Power Relay Relay Output 0 to 50 Vdc OPEN or <4 Vdc Readback as or Shop Online at omega.com RLx.COM AC/DC RLx.NO 0K Relay Close To OFF State Readback as 0 Note: When inductive loads are connected to the relays, a large counter electromotive force may occur when the relay actuates because of the energy stored in the load. These flyback voltages can severely damage the relay contacts and greatly shorten the relay life. Limit these flyback voltages at your inductive load by installing a flyback diode for DC loads or a metal IN.GNDoxide varistor for AC loads. IN.GND Relay Open Relay Close SM 33 RLx.COM 0K AC/DC RLx.NO Relay Open