Cambium Networks LTE Program. EMEA Partner Event Budapest, July 2018

Transcription

1 Cambium Networks LTE Program EMEA Partner Event Budapest, July 2018

2 Why LTE? Customer Perspective Small WISP (<2,000 subscribers) 1 NLOS performance, need for better range and coverage than other available solutions Medium WISP (2,000-10,000 subscribers) Licensed spectrum to add capacity and provide premium service Investment protection 2 Inexpensive CPE options Large WISP (> 10,000 subscribers) 3 Investors demand industry standard LTE Attractive Air Interface attributes Inexpensive CPE Cambium Perspective Adopt industry standard and innovate rather than reinvent Lower Cost SM: LTE chipsets are inexpensive relative to FPGA & DSP LTE air interface features OFDMA in downlink Improved receive sensitivity due to coding gains Carrier aggregation and LAA Frequency reuse 1 for licensed bands Inter cell interference coordination Hybrid ARQ with soft combining 2

3 Why Not Use Existing LTE solutions? Too complex (EPC, SIM cards) Too costly Not Fixed Service Provider-friendly Products that exist are immature or beta quality 3

4 Cambium Networks - Differentiating on a Standard Remove cost and complexity typically associated with LTE Exploit LTE Air Interface Features High power radio to take advantage of higher regulatory limits in 2.5GHz and 3.5 GHz Leverage our expertise in robust outdoor CPE design Retain PMP 450 networking, QoS, security and management features 4

5

6 Our LTE Solution Building on our 450 to LTE comparison, we close the gap between the existing solutions and the Cambium LTE solution. Best Customer Experience Range and Coverage Interference Mitigation Worst Existing LTE Solutions Cambium PMP Cambium LTE N/A 450 still outperforms LTE in many ways, but Cambium s LTE addresses deficiencies in alternative LTE solutions. Total Sector Capacity Subscriber Bandwidth Infrastructure Costs Mobility Support Total Cost of Ownership 6

7 Separate Baseband and Radio (Traditional LTE model) PMP450 has baseband and radio together LTE will have 8x8 Baseband Unit (BBU) and Remote Radio Heads (RRH) 2x2 Radio 8x8 Baseband (DSP SoC) RF Control (FPGA ) 2x2 Radio 2x2 Baseband (FPGA SoC) 450i AP The BBU can drive 4 2x2 radios to provide 360⁰ coverage Or one 8x8 radio for a single Sector with MU-MIMO support 8x8 Radio 8x8 Baseband (DSP SoC) RF Control (FPGA ) 7

8 Deployment ISP Data Network CPRI (Fiber) Start with one RRH, add more as you grow, all powered by same BBU RRH band spins without changing BBU hardware Future proof for LAA, just add 5GHz RRU to existing BBU No tower climb needed to access BBU easier diagnostics, lower operational expense DC In Sync In BBU 8

9 Flexibility by splitting Baseband and Radio Start with one RRH, add more as you grow, all powered by same BBU RRH bandspins without changing BBU hardware 2.5GHz 3.5GHz 5 GHz Future proof for LAA, just add 5GHz RRU to existing BBU No tower climb needed to access BBU easier diagnostics, lower operational expense 2.5GHz 5 GHz 9

10 Planned Spectrum Coverage First Release, Q4, nd Release, Q2, MHz 2400 MHz 2496 MHz 2690 MHz 3.4 GHz 3.6 GHz 3.8 GHz Band 40 (TDD) Band 41 (TDD) Band 42 (TDD) Band 43 (TDD) Band 38 (TDD) 2570 MHz 2620 MHz Band 48 (TDD) 3.55 GHz 3.7 GHz 10

11 Private LTE Solutions at 2300 MHz (Band 40) 11

12 Uncovering Opportunity Potential Band 40 opportunity for Electricity Distributors in Slovenia Likely that other similar opportunities can be found throughout Europe 12

13 What is being delivered? Q Baseband Unit LTE A Rel rack mount unit 8TX, 8RX Drive sectors (2x2 each) over CPRI 64 SM per sector GPS in 2x GigE ports Integrated EPC Future Enhancements Dual sector, LAA Carrier aggregation 600/100 Mbps 1588v SM support No mobility No roaming Remote Radio Head Band 38, 40, GHz to 2.7 GHz 2TX, 2RX 2W per port CPRI (fiber) connection to BBU 90 sector antenna 17 dbi antenna gain IP66/IP67 Future Enhancements CA (20+20, 10+10) Dual sector (no CA) Available 8W per port version Subscriber Module Band 38, 40, GHz to 2.7 GHz CAT 4 1 TX, 2 RX 100/50 Mbps 1x GigE port 30V DC Input 14 dbi integrated patch Future Enhancements CAT 6 High Gain Integrated Dish Dual Band (2 + 3 GHz) 13

14 LTE Roadmap Network Component Q Q Q H, Platform 3 GHz 450m 8x8 MU-MIMO 3 GHz 450b High Gain BBU OFDM-A Enhanced FEC 8Tx, 8Rx (High Performance) Carrier Aggregation MU-MIMO LAA LTE Narrowband IOT 1024 SMs 2Tx, 2Rx Integrated Radio (Lower Cost) RRH GHz (Bands 38, 40, 41) 2x2 2W per port GHz (Bands 38, 40, 41) 2x2 8W per port (possibly 10W per port) GHz (Bands 42, 43, 48) 2x2 (450 SM support) GHz (2x2) GHz 8x8 (MU-MIMO) GHz 8x8 (MU-MIMO) SM GHz (14 dbi Int.) CAT 4 SM GHz (High Gain) CAT 6 SM GHz (Mid and High Gain) CAT 4,6 SM GHz CA (High Gain) CAT 6 SM CAT 12 SM Product concepts described in this presentation may still be under investigation or development. Specific details, specifications and timelines are subject to change without notice. Cambium makes no commitment or representation that such product concepts will be available as commercial products. 14

15 Cambium cnranger Roadmap PLAN OF INTENT SUBJECT TO CHANGE June, Nov Dec Jan Feb Mar Apr May Jun Q3 Q4 1H 2H R1.0 Nov Sierra 800 BBU 2 GHz Palisade 200 (2x2 RRH) 2 GHz Tyndall 100 (Cat 4 SM) Initial Release R1.2 3 GHz Palisade 200 (2x2 RRH) 3 GHz Tyndall 100 (Cat 4 SM) 3 GHz Tyndall 210 (Cat 6 SM) 2 Carrier Aggregation 1024 SM Support in BBU R GHz Palisade 800 (8x8 RRH) Tyndall 300 (Cat 12 Dual Band SM) MU MIMO LAA Narrow Band IOT Completed Gate 2 Committed Gate 7 In Planning Gate 10 Evaluating Gate 13 Candidate Gate 15 R1.1 Q1 2 GHz Tyndall 210 (Cat 6 SM) 2 GHz Palisade 210 (2x2 RRH, High Power) R1.3 Q4, 2019 Tyndall 220 (Cat 6 Dual Band SM) 4 Carrier Aggregation 15

16