STEEL SOCKETS AND NIPPLES Product Catalogue

BLACK & GALVANIZED SCH 40 STEEL NIPPLES

BLACK & GALVANIZED SCH 40 BLACK AND GALVANIZED Product Specifications Welded steel pipe nipples both galvanized and black in diameters ranging from 1/8 up to 4 in lengths from close to 12 and cut-pipe

STEEL NIPPLES BLACK BRASS & GALVANIZED FITTINGSSCH 40

1/8" DIMETER STEEL NIPPLES BLCK BRSS & GLVNIZED SCH 40 Length Box/Case pprox. Galv 56-001 1.89 X Close (3/4") 5/600 0.02 57-001 1.34 56-002 1.95 x 1-1/2" 5/600 0.03 57-002 1.51 56-003 2.19 x 2" 5/600 0.04

90 Elbows Long Radius

90 Elbows Long Radius DN O.D. Center SCH STD SCH XS SCH XXS SCH 10 SCH 20 SCH 30 SCH 40 SCH 60 SCH 80 SCH 100 SCH 120 SCH 160 Inch mm to End Thickness Weight Thickness Weight Thickness Weight Thickness

4SP/6SP Series. One Piece Bite-the-Wire Spiral Hose Ends. For use with H464, H470 and H485 Hose. Marketing Catalog

For use with 464, 470 and 485 ose Marketing Catalog One Piece Bite-the-Wire Spiral ose Ends 4SP/6SP Series ose Ends eavy wall thickness maintained 4-SPIR or 6-SPIR and hose size stenciled on socket Bite-the-Wire

(618) FAX (618)

All STEEL PRODUCTS, Inc. Steel Pipe 1/8 through 120 O.D. Mechanical Squares & Rectangulars 1/2 thru 4 Square Equal Rectangulars Structural Squares & Rectangulars 1-1/2 thru 16 Square Equal Rectangulars

ROUND BEND U-BOLTS. Standard Pack: 10 Pieces. Some sizes also available in Stainless Steel. See page 50.

Round Bend s for Steel or Wrought Iron pipe sizes 1/4"-18" clusive, as listed on this and next pages, are produced from low carbon steel and supplied with NC rolled threads and two (2) hex nuts. In addition,

ROUND BEND U-BOLTS. Standard Pack: 10 Pieces. Some sizes also available in Stainless Steel. See page 50.

ROUND BEND U-BOLTS Round Bend s for Steel or Wrought Iron pipe sizes 1/4"-18" clusive, as listed on this and next pages, are produced from low carbon steel and supplied with NC rolled threads and two (2)

DN100 (4") - DN500 (20") Hot Tappings

DN00 (4") - DN500 (20") Hot Tappings TONISCO B40 Hot Tapping Machine is versatile and easy to operate. It has a full range capability of setting valves DN00 DN500 by completing it with proper adapters.

Pipe fittings and flanges, sockets for bayonet locks

Data Sheet 909750 (909725) Page 1/7 Pipe fittings and flanges, sockets for bayonet locks for temperatures up to 600 C for different fitting lengths simple installation and replacement pressure-tight sealing

SCHEDULE 40 FLUSH JOINT FITTINGS

130 PIPE SIZE 2.5' 5' 10' 20' 2.5' 5' 10' 20' 1" 11.19 15.29 22.87 41.16 17.51 25.41 39.31 72.77 1-1/4" 12.83 19.80 28.54 51.21 19.15 29.92 44.98 82.82 1-1/2" 16.78 25.79 43.10 74.53 23.10 35.91 59.53

standard stock range Consistent approach Exclusively for Stockholders Premier collection service Comprehensive stock availability

Consistent approach Exclusively for Stockholders Premier collection service Comprehensive stock availability Stainless Steel, Aluminium, Copper and Brass Stockholder Sales tel: + (0) 2 2 200 fax: + (0)

Ultrasonic Calibration Blocks & Welded Flawed Specimens for NDE Training

Ultrasonic Calibration Blocks & Welded Flawed Specimens for NDE Training Ultrasonic Calibration Blocks Custom blocks available upon request All blocks are available in metric/ inch dimensions Standard

North US 290 US 183. MLK Blvd. FM 969. ASERO Steel Sales. Ben White TX 71 IH-35 US 183

North US 290 US 8 MLK Blvd. FM 969 ASERO Steel Sales Ben White TX IH- US 8 Hot Rolled Strip Commercial Quality A - 0 Size in Per 20 Ft. /8 x /2.2 4.26 /4.9 6.8.42 8.0 /4. 0.62 /2.68 2.6 2.80.00 2 /2.06

SCHEDULE 40 FLUSH JOINT FITTINGS

130 PIPE SIZE 2.5' 5' 10' 20' 2.5' 5' 10' 20' 1" 11.19 15.29 22.87 41.16 17.51 25.41 39.31 72.77 1-1/4" 12.83 19.80 28.54 51.21 19.15 29.92 44.98 82.82 1-1/2" 16.78 25.79 43.10 74.53 23.10 35.91 59.53

SCH 5S/10S/40S/80S. Stainless Steel/Carbon Steel Butt-welding Fittings

Stainless Steel/arbon Steel Butt-welding Fittings SH 5S/10S/40S/80S Ranged from equal and reduced tees, 45 and 90 elbows, concentric and eccentric reducers, to stub ends and caps, DIE ERSTE supplies a

BTL. Taper bushing A. PLATE SPROCKET REBORE TO "G"DIMENSION. WELD TAPER WELD. ON HUB TAPER SPROCKET

is a new type of component used for joining mechanical transmission. It changed from the traditional design and now features easy-on, easy-off construction and high standardization. The grip is tightened

Compression fittings Metric and inch

Fittings Compression fittings Metric and inch Ø 4 to 28 mm tube Ø 3 /16" to È" tube Wide range of types and sizes. Rugged and durable. Suitable for use under extreme conditions of temperature and pressure.

Socket Head Cap Screw Metric

1 2 0 0 M2 WRENCH 1.mm 11 1 1 1 1 21 0 Pcs 1, 0 0 0 00 00 00 00 00 00 00 00 WRENCH 2mm 11 1 1 1 0 Pcs 0 0 0 00 00 00 00 00 WRENCH 2.mm 21 002 11 00 00 1 0 01 21 002 000 0 Pcs 1 0 2 0 00 00 00 00 00 00

Easy Flow Indicator Magnetisch-Induktiver Durchflussmesser. Type 8024 For Insertion Fittings. Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI

Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI Advantages / Benefits Reduced costs of ownership up to 6% Economic integration in pipe systems without any additional piping Shows flow rate with a clear,

Plastra is a trademark of Asya Traffic INC. The products in the catalogue are registered by Turkish Patent Institute.

Plastra is a trademark of Asya Traffic INC. The products in the catalogue are registered by Turkish Patent Institute. 20 2016 TRAFFIC INC. 2016 About Plastra Plastra products are manufactured according

Gabion Box. Selvedge Wire (mm) 6x Mesh Wire (mm) Mesh Opening (cm) Lacing Wire (mm) LxWxH (m) Plastics Coated.

Gabion Box LxWxH (m) 2x1x0.5 Opening (cm) Selvedge Lacing Square meter Material 8x10 2.00-3.05 2.7-3.8 Hot dip galvanized 2.2-3.0 10x12 2.00-3.20 2.7-4.0 High galvanized 7.5 12x15 2.00-3.80 2.7-4.2 5%

HANKIA. DSV type. Single stage,vertical Axially split case double suction pump

DSV type Single stage,vertical Axially split case double suction pump High efficiency and low pulsation Wind performance range with up to 280m head Stable service and low maintenance Heavy duty design

8100, 8200, , 8202, 8203, 8204, 8205, 8206

800, 8200, 8300 820, 8202, 8203, 8204, 8205, 8206 W R A, O USA T: 800 32 7950 440 998 2788 F: 440 992 2925... 023208 2 INSTRUCTIONS FOR 3/4,, -/4 DIAMETER TAPS FIGURE A B C D E F G HOT TAP SPINDLE HOT

Index. E Expanded Metal Raised Flattened Grating... 93

Index A Aluminum Angle... 0 Channel... 07 Flat... 0 Hexagon... 0 Pipe... 0 Plate... 99 Round... 0 Sheet... 9 Square... 0 Tread Plate (Floor/Diamond Plate)... 00 Tube... 09 Angle Aluminum... 0 Bar Size...

METRIC TO OPERATE OVERHEAD VALVES DUCTILE IRON STAINLESS STEEL ALUMINUM CARBON STEEL

METRIC TO OPERATE OVERHEAD VALVES DUCTILE IRON STAINLESS STEEL ALUMINUM CARBON STEEL CHAINWHEELS Page 2 Ductile Iron wheels Sprocket-Type, for use with Single Loop Cut Used to operate overhead valves from

Technical Data. Care and Maintenance

Worldwide Contacts www.tyco-fire.com GRINNELL G-FIRE Grooved Fittings, Ductile Iron General Description GRINNELL G-FIRE Grooved Fittings provide an economical and efficient method of changing direction,

Thermal Mass Flowmeter Sensyflow FMT200-D

Data Sheet Thermal Mass Flowmeter Sensyflow FMT200-D Direct measurement of mass flow or standard volume flow of compressed air, nitrogen and biogas independent of media pressure and temperature Wide measuring

Kully Reference Book

Kully Reference Book Serving the Greater Mid-West since 1946 Angles Channels Beams Rounds Sheets Squares Flats Rebar Wire Mesh Black & Galvanized Pipe Anchor Bolts Plastic, Copper, Black, Galvanized Pipe

Technical Data. Care and Maintenance

Worldwide Contacts www.tyco-fire.com GRINNELL G-FIRE Grooved Fittings, Ductile Iron General Description GRINNELL G-FIRE Grooved Fittings provide an economical and efficient method of changing direction,

SEAMLESS HOT ROLLED TUBES

HELÉNS RÖR AB PRUCT RANGE SEAMLESS HOT ROLLED TUBES & HOLLOW BARS Product range SEAMLESS HOT ROLLED TUBES HEAVY WALL TUBES Seamless hot rolled steel tubes for construction, mechanical and general engineering

Contents. Page 2 TRCTFP101

Contents CHAINS SPZ-SPA-SPB-SPC Profile Selection 3 Taper Bore SPZ 4-7 Taper Bore SPA 8-10 Taper Bore SPB 11-14 Taper Bore SPC 15-17 Taper Bushes 18-19 Taper Bushes - Metric 20-23 Taper Bushes - Imperial

WELDBEND CARBON STEEL WELDING FITTINGS

070-1 CARBON STEEL WELDING FITTINGS STANDARD WALL NOMIN. 90 ELBOWS 45 RETURN TEES PIPE LONG SHORT ELBOWS BEND FULL SZ STUB SIZE RADIUS RADIUS LR LR OUTLET CAPS ENDS 1/2" 16.56 17.60 154.60 20.36 235.71

CLASS 150. Investment Cast Stainless Steel Threaded End Fittings

Investment Cast Stainless Steel Threaded End Fittings Covering sizes from /8 to, DIE ERSTE manufactures and supplies the highest quality investment cast stainless steel threaded end fittings. In this series,

Stainless Steel Parts & Accessories Catalog NOVEMBER 2017

Stainless Steel Parts & Accessories Catalog NOVEMBER 2017 www.airnet-system.com TABLE OF CONTENTS PIPING PIPE 304L... 3 PIPE 316L... 3 FITTINGS QUICK DROP... 4 SWAN NECK... 4 ELBOW 45... 4 ELBOW 90...5

MICROMETERS. Traditional External Micrometer 1961 Series. Traditional External Micrometer 1965 Series. For more information visit

Traditional External Micrometer 1961 Series Standard: BS870, DIN 863/1, ISO361 All models feature Tungsten carbide measuring faces 6.5mm spindle diameter Speeder type ratchet Locking lever Choice of standard

Inch and Metric Flaring Tooling for 1025

Inch and Metric Flaring Tooling for 1025 Flaring Tools Parflange 1025 37 Flaring and Flanging Systems Parker s Parflange 1025 machine is designed to create 37 flared tube ends. For more detailed information

DN40 (1 1/2") - DN200 (8") Hot Tappings

DN40 ( /2") - DN200 (8") Hot Tappings TONISCO B30 Hot Tapping Machine is versatile and easy to operate. It has a full range capability of setting valves DN40 DN200 by completing it with proper adapters.

OIL INDIA LIMITED (A Government of India Enterprise) P.O. Duliajan, Pin Dist-Dibrugarh, Assam CORRIGENDUM

OIL INDIA LIMITED (A Government of India Enterprise) P.O. Duliajan, Pin 786602 Dist-Dibrugarh, Assam CORRIGENDUM Addendum No. 1 Dated 30.03.2016 to Tender No. SSG0666L16/01 This Addendum No. 1 dated 30.03.2016

YOUR STABLE PARTNER FOR MANUFACTURING. MARSTAND

- YOUR STABLE PARTNER FOR MANUFACTURING. MARSTAND MarStand Indicator Stands, Comparator Stands and Run out Testing Instruments offer high stablity which ensures precise measurements; regardless of whether

DFW Ultrasonic Water Meters

2012 NEW RELEASE DFW Ultrasonic Water Meters Waterworks and Industrial applications, DN32 600 Available Battery powered -- 6 years life expectancy No moving parts Rugged mechanical design -- IP68 Built-in

Signet 2552 Metal Magmeter Flow Sensors

Signet 2552 Metal Magmeter Flow s Features Test certificate included Award winning hot-tap magnetic flow sensor up to DN2550 (102 in.) Patented Magmeter technology* Operating range 0.05 to 10 m/s (0.15

Seamless. Hydrocarbon Processing Industry. Power Generation

Seamless Hydrocarbon Processing Industry Power Generation About Us Hydrocarbon Processing Industry (HPI) We cover the full range of steel grades for the Hydrocarbon Processing Industry, from carbon steel

Clamps with RUBBER BUSHING

Clamps with RUBBER BUSHING Order Codes and dimensions Standard series DIN 3015, Part 1 p 34 Order Codes and dimensions Heavy series DIN 3015, Part 2 p 35-36 clamps with rubber bushing Mounting example

WORKSHOP EQUIPMENT. Engineers Stud. Flanged Nut. T-Slot Nut. Step Block. Extension Nut. Step Clamp

GROUP Indexa T-Slot Clamping Kits Designed to save set up time and solve most T-Slot clamping problems. All components are manufactured from S45C (JIS)/CK45 (DIN) grade non-alloy carbon steel, heat treated

UltraGrip PE & PVC Connections & Repairs

Next Generation UltraGrip PE & PVC Connections & Repairs NOW AVAILABLE UP TO DN600 PIONEERS IN PIPE SOLUTIONS UltraGrip Overview Ideal for PE & PVC Pipe Connections & Transitions Pipe Materials UltraGrip

CLAMPS & SUPPORTS CATALOG

ISO-900:2008 CLAMPS & SUPPORTS CATALOG Phone: 28 96 0900 Fax: 28 96 000 Email: sales@expotechusa.com Web: expotechusa.com 32 Cat. No. Page Cat. No. Page Cat. No. Page 07667... 6 03936... 2 038292... 0

ANCHORS EARTH HARDWARE POLELINE AERIAL DROP HARDWARE ATTACHMENTS DROP GROUNDING HARDWARE BANDING TOOLS ANCHORS WALL FASTENERS

EARTH ANCHORS POLELINE HARDWARE AERIAL DROP HARDWARE DROP ATTACHMENTS GROUNDING HARDWARE BANDING TOOLS WALL ANCHORS 2009-2010 FASTENERS EA1 Single Solid Square Hub Power Driven Anchor Installation is performed

1 5 / 8" 7 /8" 2" 7 /8" 75. 3" 7 /8" 75 Polyurethane HI-TECH Delrin / /16 3/4

For use on wood furniture that can accept a 3 /8" diameter hole approximately 1 5 /8" deep. No.20 pressed steel adapter (Part #50011) with toothed base is supplied. size: 5 /16" diameter x 1 1 /2" long.

Table Of Contents. Tyson Gentz General Manager Electrical Services of Arizona. Training & Consulting. Custom Fabrication. Temporary Power Stations 4

Thank you for your interest in Electrical Services of Arizona. ESA s mission is two-fold. Through our service offerings we help customers be more competitive. In our products areas, we offer competitive

BaerCoil Thread Repair Kits

BaerCoil Thread Repair Kits www.baercoil.com Thread repair Besides thread reinforcement, the BaerCoil thread insert also enable the repair of damaged threads. Rejected parts can be saved while maintaining

Catalogue 2016 HOSE TECHNOLOGY. Fittings, Valves and Accessories. Schauenburg Hose Technology Group

Catalogue 2016 HOSE TECHNOLOGY Fittings, Valves and Accessories Schauenburg Hose Technology Group PREAMBLE The new fittings and accessories range of APD Petzetakis Schlauchtechnik GmbH Quality and reliability

STEEL PIPE NIPPLES G1616 STANDARD BLACK STEEL NIPPLES ITEMS HIGHLIGHTED

STEEL PIPE NIPPLES Pipe PRICE Part No. Size Length EACH G1616 STANDARD BLACK STEEL NIPPLES G1616-0XC 1 8" Close $ 2.00 G1616-0X1.5 1 8" 1 1 2" 2.20 G1616-0X2 1 8" 2" 2.30 G1616-0X2.5 1 8" 2 1 2" 2.50 G1616-0X3

Amphenol. 608 Series. Amphenol Limited. Design Features. Circular Environmental Connectors Approved to BS9522 F0020 (Pattern 608)

Amphenol 608 Series Circular Environmental Connectors Approved to BS9522 F0020 (Pattern 608) CE30 Design Features Keyway Polarisation. Ni Aluminium Bronze Shells. Threaded Anti Vibration coupling mechanism.

Radiator Lockshield Valves ADN.. AEN..

07 EN - Straight version ADN.. Angle version AEN.. ACVATIX TM Radiator Lockshield Valves ADN.. AEN.. for -pipe heating systems Valve bodies made of brass, mat nickel-plated DN 0, DN and DN 0 Integrated

Explosionproof Meter Housings

METER HOUSINGS Explosionproof - Screw Cover Drilled and tapped to specification, attach layout sheet. Dimensions are nominal internal. 134 XJDH N4 4 1/8 x 4 1/8 x 3 Cover Opening 3 3/4 XJSH N4 (Tapped

PVC HI-STRENGTH SCHEDULE 80 PIPE - PLAIN ENDS

29 PRICE LIST 1 May 2018 Hi-Strength Industrial Piping System Plastic Systems PVC Schedule 80 Piping system is truly an industrial product. Often referred to as Hi Strength PVC, its industrial grade wall

Standard Trackstar material. FDA/USDA approved material. Improved wear resistance and reduced thermal expansion Available in all colors except white

2 The Advantage Fight friction and reduce costs with long-wearing Trackstar UHMW Belt and Chain Guides. Available from stock, Fenner Drives offers the widest range of standard profiles for use in guiding

Tech Tubes & Fittings. An ISO 9001: 2008 Company

Tech Tubes & Fittings An ISO 9001: 2008 Company The Company Tech Tubes & Fittings is a highly acclaimed manufacturer and exporter of products like Instrumentation/Tube Fittings, Pipe Fittings, Flanges

Material Testing Machine

JINAN TIANCHEN TESTING MACHINE MANUFACTURING CO., LTD Address: No.66 Kaiyuan Road, Licheng District, Jinan City, Shandong Province, China. Zip ode: 250101 Tel: +86-531-88608888 Fax: +86-531-88607888 Web:

How to Identify Fluid Ports and Connectors. A guide to North American, British, Japanese, German (DIN metric), and ISO connections

How to Identify Fluid Ports and Connectors A guide to North American, British, Japanese, German (DIN metric), and ISO connections How to measure threads Use a thread pitch gauge to determine the number

are graded into grades according to mean grading deviation of the nominal ball diameter in the lot D wm Balls

Rolling Elements Balls Balls as a rolling bearing component are made of the same material as bearing rings. The material hardness after processing (hardening) is 61 to 65 HRC. Balls with diameter = 3.175

Fig 1 Changing Pipe Wall Thicknesses in the Master Files, and making these changes available to use in the spec.

Fig 1 Changing Pipe Wall Thicknesses in the Master Files, and making these changes available to use in the spec. Fig 2 Select the Master Files from the Edit menu Fig 3 Fig 4 Click the Show Unused Rows

Head office. Sales offices. ISRAEL NOGA Engineering Ltd. Tel: Fax:

C A T A L O G Head office ISRAEL NOGA Engineering Ltd. Tel: 972-4-9808080 Fax: 972-4-9808638 noga@noga.com www.noga.com Sales offices ISRAEL NOGA Tools Tel: 972-9-835-3243 Fax: 972-9-835-3307 nogatools@nogatools.co.il

Products Catalogue Objective and Structure The company s main objective is the supply of quality products, with respect to: practical design increased durability easy and quick installation reasonable

Pipe Fittings. ADVANTAGES Very easy to assemble. No special tools or extra parts are necessary. May be assembled/ disassembled numerous times.

Fittings TTON Fittings are manufactured with female R Series and male BST threads in accordance with AS1772. These robust fittings are available in a comprehensive range of sizes ranging from 1/8" to 1".

1735 N. 28th Avenue Suite 1 Phoenix, AZ Local: Outside AZ: Fax:

1735 N. 28th Avenue Suite 1 Phoenix, AZ 85009 Local: 602-269-1775 Outside AZ: 877-845-7940 Fax: 602-269-0542 CONTENTS SOLID CARBIDE THREAD MILLS Thread Mill Identification System Carbide Grades Internal

7 Micrometers. 47 Calipers. 77 Depth & Height Gauges. 89 Indicator & Dial Gauges. 131 Bore Gauges. 137 Other Gauges. 161 Gauges

CATALOG NO. AS7 I N D E X 7 Micrometers 7 Calipers 77 Depth & Height Gauges 89 Indicator & Dial Gauges Bore Gauges 7 Other Gauges Gauges 8 Testers & Optical Instrument A S I M E T O C A T A L O G 7 Precision

Product Catalogue in partnership with

Conduit & Fittings Product Catalogue in partnership with Welcome to our catalogue. SENTOR ELECTRICAL is the premier stockist of TOP TUBES ELECTRICAL, the market leading British company for top quality

Rosemount 1595 Conditioning Orifice Plate

Rosemount 1595 Conditioning Orifice Plate Ordering information Rosemount 1595 Conditioning Orifice combines a flow conditioner with an orifice plate into a highly accurate primary element. Requires only

HMT330 Series Humidity and Temperature Transmitters for Industrial Applications

HMT330 Series Humidity and Temperature Transmitters for Industrial Applications The HMT330 transmitter family has the solution for demanding industrial humidity measurements. Six models for demanding industrial

precision pipe fittings

Precision Pipe Fittings 1 8 to 1 sizes 316 stainless steel, brass, and exotic materials NPT threads HOKE Inc. PO Box 4866 Spartanburg, SC 29305-4866 Phone (864) 574-7966 Fax (864) 587-5608 www.hoke.com

GRINNELL Figure 730 Mechanical Tees and Crosses Threaded / Grooved General Description. Technical Data. Page 1 of 8 JANUARY 2014 G210

Worldwide ontacts www.grinnell.com GRINNLL Figure 730 Mechanical s and es Threaded / General escription The GRINNLL Figure 730 Mechanical s provide an additional threaded or grooved outlet in existing

Features: Quality Testing and Documentation

1 The Yokogawa Falcon Series Dual Chamber Orifice Assembly YFOM-DC, is suitably designed for on-line retraction and inspection of orifice plates in process full flow and pressure conditions. The orifice

METAL CUTTING BAND SAW

SHOOT Brand METAL CUTTING BAND SAW YANTAI SHOOT IMPORT & EXPORT CO.,LTD Add:No.113 Zhengfu Street, Muping District, Yantai City,Shandong Province China Tel:86-535-4222377,4364070 Fax:86-535-8941177 Post

CLARK-DRAIN. Security Solutions.

CLARK-DRAIN T H E D R A I N A G E C O M P A N Y Security Solutions CLARK-DRAIN T H E D R A I N A G E C O M P A N Y INTRODUCTION Clark-Drain Ltd are leaders in our field, with over 50 years of experience

selection of special materials is available to handle almost any fluid.

For Pressure Transmitters and Bourdon Tube Pressure Gauges Types 839 X Chemical Seals for Various Applications Advantages / Benefits Separation of medium and measuring device in difficult applications

Compression Fittings 34 Series Inch

4 Series /6" O/ l Wide range of types and sizes l Rugged and durable l Suitable for use under extreme conditions of pressure and temperature l Ideal for most general industrial applications Technical ata

r b rothley burn Introduction Fittings & Accessories Adaptable Boxes Switch & Socket Boxes

rothley Contents Introduction 2-4 * HDG Conduit Manufacturing Process * BCMS Burn Cable Management System UK product range * Standards * Maximum corrosion prevention * Major advacntages of using BURN steel

نﺎﻤﻟ آ ﻲﻧﺎﭙﻤﻛ يرﺎﺼﺤﻧا هﺪﻨﻳﺎﻤﻧ

ا زما صنعت گراد Mahr - your stable partner for manufacturing. Marstand. The latest information on MARSTAND products can be found on our website: www.mahr.com, WebCode 210 marstand Indicator Stands, Comparator

How to Identify Fluid Ports and Connectors. A guide to North American, British, Japanese, German (DIN metric), and ISO connections

How to Identify Fluid Ports and Connectors A guide to North American, British, Japanese, German (DIN metric), and ISO connections How to measure threads Measure the thread diameter with an / caliper. When

Electrak quick fit floor service outlet boxes

www.electrak.co.uk 12 Electrak quick fit floor service outlet boxes Tel: 01207 503400 Fax: 01207 501799 Email: sales@electrak.co.uk Because of our policy of continuous improvement, Electrak reserves the

TILBURY STEEL SERVICE CENTRE

TILBURY STEEL SERVICE CENTRE 159 Queen Street North Tilbury, ON, N0P 2L0 Voice: 519-682-0000 Toll-Free: 1-800-565-1077 Fax: 519-682-0004 Email: tsales@tilburysteel.com STOCK BOOK & REFERENCE GUIDE Tilbury

Grease Guns PRELIxx and PRELIxx PRO

Grease Guns PRELIxx and PRELIxx PRO 2014.1 Quality that leads Different grease gun colors for different grease types 03 Grease Guns PRELIxx and PRELIxx Pro 2014.1 Contents Contents PRELIxx 2014.1 Technical

Spec Setup Part One. Fig 2 - Select Job/Spec Setup from the "Edit" menu in order to add a Specification to the current job.

Spec Setup Part One Fig 1 Typical AcornPipe Drawing Fig 2 - Select Job/Spec Setup from the "Edit" menu in order to add a Specification to the current job. Fig 3 - The Job/Spec Setup screeen opens. Fig

Type of Project: Metric Mix Metric Inches. Project Standard: ANSI ANSI/ ISO ISO DIN

3D Plant Project Setup Use this form to help you compile the various of information you need to design an effective, comprehensive, and correct 3D plant project. Date Prepared: Project Name: Project Location:

Weld Fittings Ultrahigh-Purity and Industrial

www.swagelok.com Catalog Title Weld ittings Ultrahigh-Purity and Industrial / to in. and to mm 3, 3, 3 VR, and 3 VIM/VR stainless steel materials ittings for manual or automatic welding equipment 2 Weld

Hot Rolled Steel Products. Contents

Hot Rolled Steel Products Contents Angles 2 Bar Gratg 3 Beams & Tees 4 Cap Rail 6 Channels 6 Expanded Metal 8 Flats & Strip 9 Floor Plate 12 Grip Step 13 Ladder Rung 13 Pipe 13 Plate 14 Rebar 14 Rounds

Security Seals, Scaffolding and Transit Protection

Security Seals, Scaffolding and Transit Protection Security Seals 68-70 Transit Protection 71-73 Scaffolding Safety 74-75 67 Quote / sample / order online Smooth Grips SR 1153 Smooth strap allows easy

Series DMHF Heat Meter

Series DMHF Heat Meter The Series DMHF adopt the MultiPulse TM Technology, Digital Signal Processing Technology and Error Correction Technology, which are the state-of-the-art non-invasive flow measurement

D-2000 Quick Opening Closures

D-2000 Quick Opening Closures s: 4-inch and larger Bulletin No: 50.003.04 Version:.2017 Cross Indexing No: n/a Supercedes: 50.003.03 (01.20) Options Description T.D. Williamson, Inc. s Clamp Ring Closures

Dimensions [16.6] M8x [16.6] [16.6] M12x1. M12x [16.7] M18x1 DP DP DP Bi 2-G12-AP6X-H1141

Sensors Die Protector DP-08-25-08 DP-08-50-08 DP-12-25-12 DP-12-50-12 DP-18-25-18 DP-18-75-18 A2521 A9473 A2519 A9169 A2520 A9527 A B C D E F G H 0.984 [25.0] 1.97 [50.0] 0.984 [25.0] 1.969 [50.0] 0.984

www.industrial-needs.com PCE Americas Inc. 711 Commerce Way Suite 8 Jupiter FL-33458 USA From outside US: +1 Tel: (561) 320-9162 Fax: (561) 320-9176 info@pce-americas.com PCE Instruments UK Ltd. Units

060-Hardware. Clamps and Brackets Hose Clamps

Hose Clamps Part No. Range 401-41904 7/32" - 5/8" 401-41906 7/16" - 25/32" 401-41908 1/2" - 29/32" 401-41910 9/16" - 1-1/16" 401-41912 11/16" - 1-1/4" 401-41916 13/16" - 1-1/2" 401-41920 13/16" - 1-3/4"

SPIRAL G.P. GASKETS. Wound Gaskets. Leader in Gasket Provider

SPIRAL Wound Gaskets Overview G.P.Gaskets is offering a full range of Spiral Wound Gaskets. The objective is to make available in India, Spiral Wound Gaskets manufactured to the most exacting international

FITTINGS FOR COMMERCIAL VEHICLES

FITTINGS FOR COMMERCIAL VEHICLES Catalogue no. C CB gb 048 01 LOAD SECURING SERIES MEDIUM 1 2 3 4 9 Vertical load restraining bar Order no. F 22 FC V22142 00 00 height 2055 mm Telescopic load restraining

INTERAPID Depth Feet. Brown & Sharpe CENTER FINDER. Model with a flat measuring face. Model with a prismatic measuring face H-16

INTERAPID Depth Feet Model with a flat measuring face ø28 ø8 Finish lapped measuring faces. Clamp with lock for mounting a dial gauge or an electronic probe Supplied ø6.5 without indicator 80 Suited carrying

CI/SfB (74) X. Cistern Frames and Flush Plates. Second Edition DOLPHIN

CI/SfB (74) X Cistern Frames and Flush Plates Second Edition Washrooms worth experiencing You can tell how much a company cares about its customers by inspecting its washrooms Copyright Bell-Chem Products

SGB100 BLUETOOTH COMMUNICATION MODULE

SGB100 BLUETOOTH COMMUNICATION MODULE USER MANUAL SMARTGEN (ZHENGZHOU) TECHNOLOGY CO.,LTD. Chinese trademark English trademark SmartGen make your generator smart SmartGen Technology Co., Ltd No. 28 Jinsuo

Rice PVC Water Well Casing Solutions for Water Well Drillers

Rice PVC Water Well Casing Solutions for Water Well Drillers We use PVC that is manufactured to strict quality, performance and dimension standards. Stocked in solid & slotted well screen. Specifications

Thermocouple Technology, Inc.

Series E End Cap Series - Manufacturing Standard Valid only for Overall Length L maximum of 24" and/or one-piece construction barstock *NOTICE: TTEC provides a one piece construction machined barstock