auto TVS Automotive Solutions AEC-Q100 Qualified TVS Solutions
|
|
|
- Felix Ramsey
- 6 years ago
- Views:
Transcription
1 auto AEC-Q100 Qualified TVS Solutions TVS Automotive Solutions Semtech s Circuit Protection solutions for automotive interfaces provide AEC-Q100 Qualified TVS solutions featuring industry leading clamping voltage performance, high ESD immunity and low capacitance TVS arrays.
2 contents USB Protection 3 Ethernet Protection 4 HDMI & Antenna Protection 5 Vbus/DC & SD Card Protection 6 Audio Protection 7 High Performance Circuit Protection Automotive Products Semtech s industry leading TVS protection devices safeguard Automotive data-line circuits from ESD and other overvoltage transients. With leading edge process technologies and applications know-how Semtech is leading the way in automotive circuit protection. Keypad Protection 7 USB 2.0 Infotainment Phone Connectivity Antennas AM/FM, DAB, GPS, Satellite, WiFi, Telematics Applications Analog Video, LVDS ADAS, Back-up Camera Applications USB 3.0 / HDMI Audio Video Infotainment, Back-end Display 2-Wire Ethernet ADAS, 360 Camera View, Audio Standard Ethernet On-Board Diagnostics, Networking SD Card / Memory Navigation Applications Audio Infotainment, Console Display CAN, LIN Control Bus, Networking 2 Semtech Automotive Selector Guide 2016
3 USB Protection Vbus µclamp0571p USB Connector D+ USB Controller D- RClamp0512TQ USB 2.0 application USB 2.0 RClamp 0512TQ 5V 2 ±30kV / ±30kV 20A 2pF 1.0x0.6x0.58 RClamp 0582N 5V 3 ±20kV / ±12kV 5A 0.5pF 1.2x1.0x0.58 USB 2.0 RClamp 0531TQ 5V 1 ±20kV / ±12kV 4A 0.5pF 1.0x0.6x0.5 RClamp 0582BQ 5V 2 ±30kV / ±25kV 15A 1.2pF 1.6x1.6x0.75 EClamp 8052P 5V 2 ±30kV / ±25kV 6A 1.2pF 1.9x1.7x0.55 USB Type B Device Connector USB Type A Device Connector SSRX- SSTX- SSTX+ SSRX+ D+ D- D+ VBus SSRX- RClamp3346P RClamp3346P SSTX- D- SSRX+ µclamp0571p µclamp0571p SSTX+ VBus USB 3.0 application USB 3.0 RClamp 3346P 3.3V 6 ±20kV / ±17kV 4.5A 0.65pF 2.7x0.8x0.5 USB 3.0 RClamp 3324P 3.3V 4 ±20kV / ±17kV 4.5A 0.6pF 2.5x1.0x0.5 RClamp 3552T 3.5V 2 ±17kV / ±12kV 4A 0.4pF 1.0x0.6x
4 Ethernet Protection Low Pass Filter Connector Ethernet PHY RClamp0582BQ 2-Wire ethernet application 2-Wire Ethernet 2-Wire Ethernet Single Twisted Pair RClamp 0512TQ 5V 2 ±30kV / ±30kV 20A 2pF 1.0x0.6x0.58 RClamp 0582BQ 5V 3 ±30kV / ±25kV 15A 1.2pF 1.6x1.6x0.75 RClamp 0531TQ 5V 1 ±20kV / ±12kV 4A 0.5pF 1.0x0.6x0.5 TP1+ RJ-45 Connector TP2+ RClamp3374N TP3+ Ethernet PHY TP4+ RClamp3374N TP1- TP2- TP3- TP4- Standard ethernet application Standard Ethernet Standard Ethernet RClamp 2574NQ 2.5V 4 ±30kV / ±30kV 40A 1.7pF 3.0x2.0x0.6 RClamp 3374N 3.3V 4 ±30kV / ±30kV 40A 1.7pF 3.0x2.0x0.6 4 Semtech Automotive Selector Guide 2016
5 HDMI & Antenna/RF Protection TMDS DATA 2+ RClamp0524PQ TMDS DATA 2- TMDS DATA 1+ TMDS DATA 1- TMDS DATA 0+ To HDMI Graphics Chip TMDS DATA 0- TMDS CLOCK + TMDS CLOCK - CEC SCL SDA HP Detect HDMI 1.4 eye pattern 5V Power RClamp0524PQ HDMI application HDMI, MIPI, MHL HDMI, MIPI, MHL RClamp 0524PQ 5V 4 ±25kV / ±20kV 5A 0.6pF 2.5x1.0x0.5 EClamp 8052P 5V 2 ±30kV / ±25kV 6A 1.2pF 1.9x1.7x0.55 Receiver Circuit Antenna application Antenna/RF RClamp 0531TQ 5V 1 ±20kV / ±12kV 4A 0.5pF 1.0x0.6x0.5 Antenna Interfaces RClamp 1521PQ 15V 1 ±15kV / ±8kV 4A 0.3pF 1.0x0.6x0.5 RClamp 0582BQ 5V 2 ±30kV / ±25kV 15A 1.2pF 1.6x1.6x0.75 RClamp 2431TQ 24V 1 ±13kV / ±8kV 2A 0.35pF 1.0x0.6x
6 Vbus/DC and SD Card Protection Vbus ESD Sensitive Circuit µclampxx71p ESD surge clamping performance Vbus application Qualified Single-line DC Bus Protection Typ Application Part Number V rwm Lines ESD Rating (air/contact) Surge (8x20us) Cap (pf) Pkg Size (mm) Single-line DC Bus Protection µclamp 0571P 5V 1 ±30kV / ±30kV 80A 675pF 1.6x1.0x0.57 µclamp 0871P 8V 1 ±30kV / ±30kV 65A 475pF 1.6x1.0x0.57 µclamp 1071P 10V 1 ±30kV / ±30kV 60A 350pF 1.6x1.0x0.57 µclamp 1271P 12V 1 ±30kV / ±30kV 45A 275pF 1.6x1.0x0.57 µclamp 1571P 15V 1 ±30kV / ±30kV 40A 220pF 1.6x1.0x0.57 µclamp 1871P 18V 1 ±30kV / ±30kV 35A 220pF 1.6x1.0x0.57 µclamp 2271P 22V 1 ±30kV / ±30kV 25A 165pF 1.6x1.0x0.57 µclamp 2671P 26V 1 ±30kV / ±30kV 23A 155pF 1.6x1.0x0.57 µclamp 3671P 36V 1 ±30kV / ±30kV 18A 150pF 1.6x1.0x Baseband Controller DAT2 DAT SD Controller DAT3 CMD VCC CLK SD-DET DAT DAT3 CMD VCC CLK SD-DET DAT0 SD Memory Connector DAT1 DAT1 EClamp2357NQ Key: Top Side Trace Bottom Side Trace Via EClamp2357NQ pin configuration SD application Filter Devices - TVS + EMC Filter Typ Application Part Number V rwm Lines ESD Rating (air/contact) Filter Type Cap (pf) Pkg Size (mm) SD Card EClamp 2410PQ 5V 6 ±17kV / ±12kV SD Card Termination 15pF 4.0x1.6x0.5 EClamp 2357NQ 5V 6 ±20kV / ±12kV RC filter SD Card Termination 20pF 3.0x3.0x0.6 6 Semtech Automotive Selector Guide 2016
7 Audio and Touchkey/keypad Protection µclamp0511pq Audio application Audio Protection Audio µclamp 0511PQ 5V 1 ±30kV / ±30kV 12A 75pF 1.0x0.6x0.5 R1 µclamp0511pq R2 R3 C1 C2 C3 C4 µclamp0511pq Keypad application Touchkey/keypad Keypads, Touchbuttons, Control Lines µclamp 0301PQ 3.0V 1 ±30kV / ±25kV 5A 12pF 1.0x0.6x0.5 µclamp 3311PQ 3.3V 1 ±30kV / ±25kV 5A 12pF 1.0x0.6x0.5 µclamp 0511PQ 5V 1 ±30kV / ±30kV 12A 75pF 1.0x0.6x
8 SEMTECH CORPORATION Semtech Corporation is a leading supplier of high performance analog, mixed-signal semiconductors and advanced algorithms for high-end consumer, enterprise computing, communications, and industrial equipment. Semtech, publicly traded since 1967, is listed on the Global Select Market under the symbol SMTC and has more than 32 sales and application support offices in 14 countries as well as representatives and distribution support locations in more than 30 countries. Semtech is dedicated to providing proprietary platforms, differentiated by innovation, size, efficiency, performance, and reach. Our solutions are used in some of the most innovative systems and products in the fastest growing markets today. These markets include smartphones, LCD TVs, notebooks, tablets, smart grid, automotive, automatic meter reading, medical, wireless infrastructure, PON, Internet of Things, optical transport, and datacenters. More than 5,000 customers worldwide rely on our diverse product portfolio and world class technology roadmap for solutions in low-power wireless communications, optical data transport, video broadcasting, power management, circuit protection, touch sensing, and more, making Semtech one of the most balanced semiconductor companies in the industry. For a detailed list of sales representatives for your area please visit find us, like us, follow us visit for more 200 Flynn Road, Camarillo, California phone: (805) fax: (805) Semtech and the Semtech logo are registered marks of Semtech Corporation. All other trademarks and trade names mentioned may be marks and names of their respective companies. Semtech reserves the right to make changes to, or discontinue any products described in this document without further notice. Semtech makes no warranty, representation or guarantee, express or implied, regarding the suitability of its products for any particular purpose Semtech Corporation. All rights reserved. TVS-Auto-2018
Product Family Brief. Semtech s AEC-Q100 Qualified TVS. Advanced Circuit Protection Solutions to Safeguard Automotive Interfaces
SEMTECH PROTECTION PRODUCTS Semtech s AEC-Q100 Qualified TVS Advanced Circuit Protection Solutions to Safeguard Automotive Interfaces WWW.SEMTECH.COM Current (I) Product Family Brief The Need for Automotive
Transient Voltage Suppressors (TVS)
Product Selector Guide Q SEMTECH PROTECTION PRODUCTS Transient Voltage Suppressors (TVS) Transient voltage protection to meet the industry s toughest requirements Semtech s protection products are industryleading,
RClamp3324P. Low Capacitance RailClamp 4-Line Surge and ESD Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Low Capacitance RailClamp 4-Line Surge and ESD Protection PROTECTION PRODUCTS Description RailClamp provides ESD protection for highspeed data interfaces. It features a high maximum ESD withstand voltage
Transient Voltage Suppressors (TVS) Protection for Next Generation Designs
Product Brief Q0 Transient Voltage Suppressors (TVS) Protection for Next Generation Designs S E M T E C H P R O T E C T I O N P R O D U C T S Transient voltage suppression for lightning, electrostatic
RClamp7524T. Low Capacitance RClamp 4-Line ESD Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.
Low Capacitance RClamp 4-Line ESD Protection PROTECTION PRODUCTS Description RailClamp TVS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series
High Power µclamp 3.3V ESD & Surge Protection
High Power µclamp 3.3V ESD & Surge Protection PROTECTION PRODUCTS Description µclamp TVS diodes are designed to protect sensitive electronics from damage or latch-up due to EOS, lightning, CDE, and ESD.
2011 Protection Design Guide for Portable Device Interfaces
2011 Protection Design Guide for Portable Device Interfaces www.semtech.com Table of Contents Section I: Introduction & Background Trends in circuit protection > 4 Semtech advantages process & technology
RClamp3346P. Low Capacitance RClamp 6-Line ESD Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.
Low Capacitance RClamp 6-Line ESD Protection PROTECTION PRODUCTS Description The RClamp provides ESD protection for highspeed data interfaces. It features a high maximum ESD withstand voltage of ±17kV
RClamp3374N. High Power TVS for Ethernet Interfaces. PRELIMINARY Features
PROTECTION PRODUCTS - RailClamp Description RailClamp TS diodes are specifically designed to protect sensitive components which are connected to high-speed data and transmission lines from overvoltage
RClamp0524PA RClamp0522P
PROTECTION PRODUCTS - RailClamp Description RailClamp TVS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series has been specifically designed
TClamp1202P. Low Capacitance TClamp Surge Protection for 12V Interfaces. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
TClamp122P Low Capacitance TClamp Surge Protection for 12V Interfaces PROTECTION PRODUCTS Description TClamp 122P provides dedicated surge and ESD protection for RS-485 and other 12V lines in industrial
RClamp TM 0504M RailClamp Low Capacitance TVS Diode Array PRELIMINARY Features
Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. The RClamp series has been specifically designed to protect sensitive components which are connected
RClamp3328P. Low Capacitance RClamp. 8-Line Protection PRELIMINARY
PROTECTION PRODUCTS - RailClamp Description The RClamp provides low voltage ESD protection for high-speed ports. It features a high maximum ESD withstand voltage of ±25kV contact and ±3kV air discharge
RClamp7528T. Ultra Low Capacitance TVS Array. PRELIMINARY Features. PROTECTION PRODUCTS - RailClamp Description. Mechanical Characteristics
- RailClamp Description RailClamp TVS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive
RClamp3324T PRELIMINARY. PROTECTION PRODUCTS Absolute Maximum Rating. Electrical Characteristics (T=25 o C Unless Otherwise Specified) I PP V R
- RailClamp Description The RClamp 3324T provides ESD protection for USB3., HDMI.3/.4, and other high-speed ports. It features a high maximum ESD withstand voltage of ±25kV contact and ±3kV air discharge
ESD protection for ultra high-speed interfaces
XSON7 Rev. 1 19 August 214 Product data sheet 1. Product profile 1.1 General description The device is designed to protect high-speed interfaces such as SuperSpeed and Hi - Speed USB combination, Secure
RClamp0582B. Low Capacitance RClamp ESD and EOS Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.
RClamp582B Low Capacitance RClamp ESD and EOS Protection PROTECTION PRODUCTS Description The RClamp 582B transient voltage suppressor is specifically designed to protect sensitive components which are
Glass Ceramic ESD Suppressor
Glass Ceramic ESD Suppressor Ideal ESD Suppressor for Ultra High Speed Lines 2014.2 1/19 Contents Development Background Electrical Characteristics Application in Circuit IC Module Mobile RF Antenna TV/STB
RClamp0504F RailClamp Low Capacitance TVS Array
- RailClamp Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected
ESD Protection Diode for Smartphone
ESD Protection Diode for Smartphone Accountability Customer Focus Mutual Trust and Collaboration Innovation Learning and Growth Electrostatic Discharge IEC61000-4-2 Level Test Voltage Contact Discharge
RClamp0532T. Low Capacitance RailClamp 2-Line Surge and ESD Protection for Ethernet Interfaces. PROTECTION PRODUCTS Description.
PROTECTION PRODUCTS Description RClamp 53T is a high performance TVS array designed to protect two differential lines from overvoltage events caused by ESD, lightning, CDE (Cable Discharge Events) and
RClamp5011ZA. Ultra Small RClamp 1-Line, 5V ESD Protection. PROTECTION PRODUCTS - RailClamp Description. Features. Mechanical Characteristics
- RailClamp Description RClamp TVS diodes are designed to protect sensitive electronics from damage or latch-up due to ESD. They are designed to replace 21 size multilayer varistors (MLVs) in portable
Overvoltage protection with PROTEK TVS diodes in automotive electronics
Ian Doyle Protek / Zoltán Kiss Endrich Bauelemente Vertriebs GmbH Overvoltage protection with PROTEK TVS diodes in automotive electronics A utomotive electronics is maybe the area of the automotive industry,
BDE6A5.0D-3 BDE6A5.0D-3. Low Capacitance ESD Protection for High Speed Data
BYD Microelectronics Co., Ltd. Low Capacitance ESD Protection for High Speed Data The Series is designed to protect high speed data lines from ESD. Its common anode design protects up to four separate
RClamp0504PA RailClamp Low Capacitance TVS Array
- RailClamp Description RailClamp TVS diodes are specifically designed to protect sensitive components which are connected to high-speed data and transmission lines from overvoltage caused by ESD (electrostatic
Application guide ESD protection Automotive
Application guide ESD protection Automotive For In-Vehicle Networks and multimedia buses: CAN, LIN, FlexRay, BroadR-Reach, HDMI, LVDS, USB Type-C Contents Introduction... 3 A growing and challenging market
RClamp0522P RClamp0524P
PROTECTION PRODUCTS - RailClamp Description RailClamps are ultra low capacitance TVS arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive
RClamp0551P. Ultra-Low Capacitance 1-Line, 5V ESD protection. PRELIMINARY Features. PROTECTION PRODUCTS - RailClamp Description
- RailClamp Description RailClamp TS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive
AOZ8809ADI. Ultra-Low Capacitance TVS Diode. Features. General Description. Applications. Typical Applications
Ultra-Low Capacitance TVS Diode General Description The AOZ889ADI is a transient voltage suppressor array designed to protect high speed data lines such as HDMI 1.4/2., USB 3./3.1, MDDI, SATA, and Gigabit
RClamp7522T. Ultra Low Capacitance TVS Array PRELIMINARY
- RailClamp Description RailClamp TVS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive
ESD7004, SZESD7004. Transient Voltage Suppressors. Low Capacitance ESD Protection Diode for High Speed Data Line
Transient Voltage Suppressors Low Capacitance ESD Protection Diode for High Speed Data Line The transient voltage suppressor is designed to protect high speed data lines from ESD. Ultra low capacitance
Five Frequently Asked Questions about System Level Transient Voltage Protection
Five Frequently Asked Questions about System Level Transient Voltage Protection By Timothy Puls, Semtech Corporation 1. Do I really need a circuit protection device to protect my system from ESD? Years
RClamp0504FA RailClamp Low Capacitance TVS Array
- RailClamp Description RailClamp low capacitance TVS array designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected
4-Line BUS-Port ESD Protection - Flow Through Design FEATURES VBUS54GD-FBL VBUS54GD-FBL-G MOLDING COMPOUND FLAMMABILITY RATING
4Line BUSPort ESD Protection Flow Through Design nc. 1 nc. GND nc. nc. 9 8 7 6 D1+ D1 GND D2+ D2 22552 MARKING (example only) Dot = pin 1 marking YY = type code (see table below) XX = date code 22791 YYXX
ESD7008, SZESD7008. ESD Protection Diode Low Capacitance ESD Protection Diode for High Speed Data Line
ESD Protection Diode Low Capacitance ESD Protection Diode for High Speed Data Line The ESD78 ESD protection diode is designed specifically to protect four high speed differential pairs. Ultra low capacitance
ESD7008 Transient Voltage Suppressors Low Capacitance ESD Protection for High Speed Data
Transient Voltage Suppressors Low Capacitance ESD Protection for High Speed Data The ESD78 transient voltage suppressor is designed specifically to protect four high speed differential pairs. Ultra low
AOZ8858DI Channel Ultra-Low Capacitance TVS Array. Features. General Description. Applications. Typical Applications
4-Channel Ultra-Low Capacitance TVS Array General Description The AOZ8858DI-03 is a transient voltage suppressor array designed to protect high speed data lines such as HDMI 1.4/2.0, USB 3.0/3.1, LVDS,
Features. Applications
- MicroClamp Description The µclamp TM series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD. It is designed to replace multilayer varistors (MLVs) in portable
AOZ8844. Ultra-Low Capacitance TVS Diode. Features. General Description. Applications. Typical Applications
Ultra-Low Capacitance TVS Diode General Description The is a transient voltage suppressor array designed to protect high speed data lines such as HDMI, USB 3.0, MDDI, SATA, and Gigabit thernet from damaging
AOZ8808. Ultra-Low Capacitance TVS Diode. Features. General Description. Applications. Typical Applications
Ultra-Low Capacitance TVS Diode General Description The is a transient voltage suppressor array designed to protect high speed data lines such as HDMI 1.4/2.0, USB 3.0, MDDI, SATA, and Gigabit thernet
AZC002-04S Low Capacitance ESD Protection Array For High Speed Data Interfaces Features IEC (ESD) ±15kV (air), ±8kV (contact)
Features ESD Protect for 4 high-speed I/O channels Provide ESD protection for each channel to IEC 000-4- (ESD) ±kv (air), ±8kV (contact) IEC 000-4-4 (EFT) (/0ns) Level-3, 0A for I/O, 40A for Power IEC
RClamp2504P & RClamp3304P RailClamp 2.5V & 3.3V TVS Arrays
- RailClamp Description RailClamp is a low capacitance TS array designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected
RClamp0502A RailClamp Low Capacitance TVS Array
- RailClamp Description The RailClamp series consists of ultra low capacitance TS arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive
EMIF06-USD14F3. 6-line low capacitance IPAD for micro-sd card with EMI filtering and ESD protection. Applications. Description. Features.
6-line low capacitance IPAD for micro-sd card with EMI filtering and ESD protection Applications Datasheet production data Flip Chip (15 bumps) Consumer and computer electronics with micro-sd card such
Ceramic Transient Voltage Suppressors
EPCOS Sample Kit 2015 Ceramic Transient Voltage Suppressors CTVS Multilayer Varistors and CeraDiodes for General Use www.epcos.com Protection against ESD and high energy transients for general use TDK
SPA TVS Diode Arrays ESD and Lightning Protection
Introduction: Designers today s electronic devices have demanded more functionality with greater flexibility and higher levels user interaction. These circumstances have helped in driving the development
System-Level and Application Specific ESD Protection Guide
2009 Littelfuse, Inc 1 Introduction: Designers of today s electronic devices have demanded more functionality with greater flexibility and higher levels of user interaction. These circumstances have helped
SFC ChipClamp ΤΜ Flip Chip TVS Diode with T-Filter PRELIMINARY Features
Description The SFC2282-50 is a low pass T-filter with integrated TVS diodes. It is designed to provide bidirectional filtering of EMI/RFI signals and electrostatic discharge (ESD) protection in portable
INTEGRATED EMI FILTER/ESD PROTECTION FOR LCD DISPLAYS IN MOBILE HANDSETS
INTEGRATED EMI FILTER/ESD PROTECTION FOR LCD DISPLAYS IN MOBILE HANDSETS Manufactured by: Integrated Products Group Garden Grove, CA Telephone: (714) 891-6171 More than solutions enabling possibilities
RClamp0501T. Low Capacitance 1-Line ESD protection. PROTECTION PRODUCTS - RailClamp Description. Features. Mechanical Characteristics.
- RailClamp Description RailClamp TS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive
PESDxUSB3S series. ESD protection for differential data lines
Rev. 3 26 April 2016 Product data sheet 1. Product profile 1.1 General description The devices are ElectroStatic Discharge (ESD) protection for one, two and three differential channels. It is footprint
Emerging Markets for Ethernet Technology. JC Lin, Ph.D. VP, Ethernet Products Micrel, Inc. Oct. 16, 2009
Emerging Markets for Ethernet Technology JC Lin, Ph.D. VP, Ethernet Products Micrel, Inc. Oct. 16, 2009 Ethernet History Invented by Robert Metcalf at Xerox in 1973 and patented in 1976 Ethernet PHY Bus
AZC099-04S 4 IEC (ESD)
Features ESD Protect for 4 high-speed I/O channels Provide ESD protection for each channel to IEC 000-4- (ESD) ±kv (air), ±8kV (contact) IEC 000-4-4 (EFT) (/0ns) Level-3, 0A for I/O, 40A for Power IEC
USB Type-C Connector Specification
HDMI Over Alt USB Mode Type-C for USB Type-C Connector Specification HDMI Licensing, LLC 2016 1 Copyright HDMI Licensing, LLC 2016 All Rights Reserved What is HDMI Alt Mode for USB Type-C? HDMI Alt Mode
The Information contained herein is subject to change without notice. Revisions may be issued regarding changes and/or additions.
Cobalt MC Gumstix, Inc. shall have no liability of any kind, express or implied, arising out of the use of the Information in this document, including direct, indirect, special or consequential damages.
L30ESDL5V0C6-4X SOT23-6L. STAND-OFF VOLTAGE Volts POWER DISSIPATION WATTS ESD PROTECTION DEVICE GENERAL DESCRIPTION FEATURES APPLICATION
LITE-ON SEMICONDUCT L0ESDLV0C-X ESD PROTECTION DEVICE STANOFF VOLTAGE -.0 Volts POWER DISSIPATION - 00 WATTS GENERAL DESCRIPTION The L0ESDLV0C-X is low capacitance TVS arrays designed to protect high speed
Dell Studio 1569 Comprehensive Specifications
Dell Studio 1569 Comprehensive Specifications This document provides information that you may need when setting up, updating drivers for, and upgrading your computer. NOTE: Offerings may vary by region.
CDDFN P - Surface Mount TVS Diode Array
*RoHS COMPLIANT Features n RoHS compliant* n Low capacitance -. pf (I/O to I/O) n ESD protection to IEC -- (Level ) Applications n USB 3. n USB 3. CDDFN-5P - Surface Mount TVS Diode Array General Information
ESD7104. Transient Voltage Suppressors. Low Capacitance ESD Protection for High Speed Data
ESD714 Transient Voltage Suppressors Low Capacitance ESD Protection for High Speed Data The ESD714 transient voltage suppressor is designed to protect high speed data lines from ESD. Ultra low capacitance
Diodes Incorporated Corporate Direction
Diodes Incorporated Corporate Direction Vision: Create Shareholder Value Goal 1: $1B Market Cap 2010 Goal 2: $1B Annual Revenue 2017* Goal 3: $1B Gross Profit Goal 4: $1B Profit Before Tax $1B PBT $1B
Application guide: ESD protection
Application guide: ESD protection For automotive and industrial applications: car infotainment, body control modules, video cameras, industrial computers, and test & measurement equipment Contents 1. Automotive
AOZ8804A. Ultra-Low Capacitance TVS Diode. Features. General Description. Applications. Typical Applications
Ultra-Low Capacitance TS Diode General Description The is a transient voltage suppressor array designed to protect high speed data lines such as HDMI, USB 3.0, MDDI, SATA, and Gigabit thernet from damaging
EMIF06-HSD04F3. 6-line low capacitance IPAD for micro-sd card with EMI filtering and ESD protection. Features. Application.
6-line low capacitance IPAD for micro-sd card with EMI filtering and ESD protection Features Datasheet production data Figure 1. Pin configuration (bump side) Very low line capacitance to compensate long
AOZ8806. Ultra-Low Capacitance TVS Diode. General Description. Features. Applications. Typical Applications
Ultra-Low Capacitance TVS Diode General Description The OZ8806 is a transient voltage suppressor array designed to protect high speed data lines such as HDMI, USB 3.0, MDDI, ST, and Gigabit thernet from
EMI4172. Common Mode Filter with ESD Protection
Common Mode Filter with ESD Protection Functional Description The is an integrated common mode filter providing both ESD protection and EMI filtering for high speed digital serial interfaces such as HDMI
RClamp0554S RailClamp Low Capacitance TVS Diode Array
- RailClamp Description RailClamp is a low capacitance TVS array designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected
RClamp0504S RailClamp Low Capacitance TVS Array
- RailClamp Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected
AGL Reference Hardware Specification Document
AGL Reference Hardware Specification Document 2017/10/18 Ver 0.1.0 1 Change History Version Date 0.1.0 2017/10/18 The first edition 2 Index 1. AGL Reference Hardware overview... 5 1.1. Goals of AGL Reference
SF100 programmer Serial Flash In System Programming solution
4F-2, N16, Jin Jhou St, Taipei, Taiwan, ROC SF100 programmer Serial Flash In System Programming solution The Innovative solution to update the Serial Flash on board High performances for low price USB
AZC002-02N Low Capacitance ESD Protection Array For High Speed Data Interfaces Features IEC (ESD) ±15kV (air), ±8kV (contact)
Features ESD Protect for 2 high-speed I/O channels Provide ESD protection for each channel to IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact) IEC 61000-4-4 (EFT) (5/50ns) Level-3, 20A for I/O, 40A for
PCMFxUSB3S series. Common-mode EMI filter for differential channels with integrated ESD protection
Common-mode EMI filter for differential channels with integrated ESD protection Rev. 2 7 March 2016 Product data sheet 1. Product profile 1.1 General description Common-mode ElectroMagnetic Interference
4-Line BUS-Port ESD Protection - Flow Through Design FEATURES VBUS54ED-FBL VBUS54ED-FBL-G MOLDING COMPOUND FLAMMABILITY RATING
4Line BUSPort ESD Protection Flow Through Design nc. nc. GND nc. nc. 9 8 7 6 D1+ D1 GND D2+ D2 22552 MARKING (example only) Dot = pin 1 marking YY = type code (see table below) XX = date code 22551 YYXX
Galvanic Isolated Latching 60V Solid State Relay
TRIUNE PRODUCTS Features Low Quiescent Operating Currents 2uA/4uA in OFF/ON state Scalable galvanic isolation from primary to secondary sides of the device Single control signal for on/off input (CLK)
SABRE for Automotive Infotainment Quick Start Guide. Smart Application Blueprint for Rapid Engineering Based on the i.mx 6 Series
SABRE for Automotive Infotainment Quick Start Guide Smart Application Blueprint for Rapid Engineering Based on the i.mx 6 Series About SABRE Platform for Automotive Infotainment Based on the the i.mx 6
MG2040. Transient Voltage Suppressors. Low Capacitance ESD Protection for High Speed Video Interface
Transient Voltage Suppressors Low Capacitance ESD Protection for High Speed Video Interface The MG24 transient voltage suppressor is designed specifically to protect HDMI and Display Port with full functionality
Ceramic Transient Voltage Suppressors
EPCOS Sample Kit 2015 Ceramic Transient Voltage Suppressors CTVS Multilayer Varistors and CeraDiodes for Industrial Use www.epcos.com Protection against ESD and surge currents for industrial use Industrial
EMI2121, SZEMI2121. Single Pair Common Mode Filter with ESD Protection
Single Pair Common Mode Filter with ESD Protection Description The EMI22 is an integrated common mode filter providing both ESD protection and EMI filtering for high speed serial digital interfaces such
AOZ8882. Ultra-Low Capacitance TVS Diode Array. General Description. Features. Applications. Typical Application
Ultra-Low Capacitance TS Diode Array General Description The AOZ8882 is a transient voltage suppressor array designed to protect high speed data lines such as HDMI, MDDI, USB, SATA, and Gigabit Ethernet
IEC (EFT) 40A
Features ESD Protect for high-speed I/O channels Provide ESD protection for each channel to IEC 61000-4- (ESD) ±1kV (air), ±8kV (contact) IEC 61000-4-4 (EFT) 40A (/0ns) IEC 61000-4- (Lightning) 1A (8/0µs)
uclamp2512t Lightning and ESD Protection for Gigabit Ethernet Interfaces PROTECTION PRODUCTS - MicroClamp Description Features
- MicroClamp Description The μclamp 5T TVS diode is specifically designed to meet the performance requirements of Gigabit Ethernet interfaces. They are designed to protect sensitive PHY chips from damage
RClamp3331ZA. Ultra Small RailClamp 1-Line, 3.3V ESD Protection
- RailClamp Description RailClamp TVS diodes are ultra low capacitance devices designed to protect sensitive electronics from damage or latch-up due to ESD, EFT, and EOS. They are designed for use on high
CitrusCom CS0806U. Features. Applications. Mechanical Characteristics. Description. Circuit Diagram. Pin Configuration
Features Transient protection for high-speed data lines IEC 1000--2 (ESD) ±1kV (Air) ±8kV (Contact) IEC 1000-- (EFT) 0A (/0 ns) Cable Discharge Event (CDE) Small package (2.9mm 2.8mm 1.mm) Protects four
European Conference on Nanoelectronics and Embedded Systems for Electric Mobility. Automotive Ethernet The Road Ahead
European Conference on Nanoelectronics and Embedded Systems for Electric Mobility emobility emotion 25-26 th September 2013, Toulouse, France Automotive Ethernet The Road Ahead Peter Hank, System Architect
uclamp0801t Low Profile μclamp 1-Line ESD protection PROTECTION PRODUCTS - MicroClamp Description Features Mechanical Characteristics Applications
- MicroClamp Description The μclamp series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD. It is designed to replace multilayer varistors (MLVs) in portable
Parameter Value Unit. Contact Discharge Voltage Per IEC KV. Air Discharge Voltage Per IEC KV. Operating Temperature -55 to +125
1 Feature Ultra-Low capacitance:0.05pf(typ.) Fast response time(
ESD7002, SZESD7002. Transient Voltage Suppressors. Low Capacitance ESD Protection Diode for High Speed Data Line
ESD72, SZESD72 Transient Voltage Suppressors Low Capacitance ESD Protection Diode for High Speed Data Line The ESD72 transient voltage suppressor is designed to protect high speed data lines from ESD.
T0504SP. Features. Applications. Mechanical Characteristics. Description. Circuit Diagram. Pin Configuration. Chip Integration Technology Corporation
Features Transient protection for high-speed data lines IEC 61000-4-2 (ESD) ±25kV (Air) ±17kV (Contact) IEC 61000-4-4 (EFT) 40A (5/50 ns) Cable Discharge Event (CDE) Package optimized for high-speed lines
SF100, SF200, SF300 Serial Flash Programming solutions
4F., No.7, Ln. 143, Xinming Rd., Neihu Dist., Taipei City 114, Taiwan SF100, SF200, SF300 Serial Flash Programming solutions The Innovative solution to update the Serial Flash on board and Offline High
IP4220CZ6 Dual USB 2.0 Integrated ESD protection to IEC level 4
INTEGRATED DISCRETES Integrated ESD protection to IEC 61000-4-2 level 4 2004 September 17 Philips Semiconductors FEATURES ESD IEC 61000-4-2 level 4, ± 8kV contact discharge compliant protection Four ultra-low
Very High-speed CMOS logic for next-generation designs
Very High-speed CMOS logic for next-generation designs NXP VHC/T & XC7 logic Delivering very high speed with low power over an extended temperature range, NXP s VHC/T logic devices are drop-in replacements
Efficient Verification of Mixed-Signal SerDes IP Using UVM
Efficient Verification of Mixed-Signal SerDes IP Using UVM Varun R, Senior Design Engineer, Cadence Vinayak Hegde, Design Engineering Manager, Cadence IP are an integral part of systems-on-chips (SoC)
WELCOME TO TE CONNECTIVITY
WELCOME TO TE CONNECTIVITY With a 50-plus year history of leadership, TE Connectivity is a global, $12.1 billion company that designs and manufactures over 500,000 products that connect and protect the
A4732 DPDT ANALOG SWITCH LOW-POWER, TWO-PORT, HIGH-SPEED, USB2.0 (480Mbps)
DESCRIPTION The is a Low-Power, Two-Port, High-Speed, USB2.0 (480Mbps) double pole double-throw (DPDT) Analog Switch featuring an On-Resistance of 4.5 ohm at VCC=3V and a Low On Capacitance 3.7pf Typical.
NUP2114 Series, SNUP2114UCMR6T1G Transient Voltage Suppressors Low Capacitance ESD Protection for High Speed Data
NUP2114 Series, SNUP2114UCMR6T1G Transient Voltage Suppressors Low Capacitance ESD Protection for High Speed Data The NUP2114 transient voltage suppressor is designed to protect high speed data lines from
EMI4162MUTAG. Common Mode Filter with ESD Protection
Common Mode Filter with ESD Protection Functional Description The EMI4162MU is an integrated common mode filter providing both ESD protection and EMI filtering for high speed digital serial interfaces
WS05R. Features SOT-143. Transient Voltage Suppressor IEC COMPATIBILITY (EN ) Pin 4. Pin 3. Pin 2. Pin 1 SOT-143 (Top View)
Document: W, Rev: C Transient Voltage Suppressor Features 5 Watts Peak Power per Line (tp = 8/μs) Protects two I/O lines Low operating voltage: 5V Ultra Low capacitance(
AOZ Ultra-Low Capacitance TVS Diode. Features. General Description. Applications. Typical Applications
Ultra-Low Capacitance TS Diode General Description The -03 is a transient voltage suppressor array designed to protect high speed data lines such as HDMI 1.4/2.0, USB 3.1, MDDI, SATA, and Gigabit thernet
Time Synchronization Trends for Critical Infrastructure. Randy Brudzinski Vice President Microsemi
Time Synchronization Trends for Critical Infrastructure Randy Brudzinski Vice President Microsemi Power Matters. TM Microsemi Corporation Time Synchronization Trends for Critical Infrastructure Randy Brudzinski
DATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER UDD32CXXL01 series
Product specification November 05, 2018 V.0 DATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER series RoHS compliant & Halogen free 2 Electrostatic Discharged Protection Devices
SDC15. TVS Diode Array for ESD Protection of 12V Data and Power Lines. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Description The transient voltage suppressor (TVS) is designed to protect components which are connected to data and transmission lines from voltage surges caused by electrostatic discharge (ESD), electrical