Agilent CDMA Base Station Over-Air Maintenance Tool

Transcription

1 Agilent CDMA Base Station Over-Air Maintenance Tool Configuration Guide The Agilent Technologies CDMA Over- Air Maintenance Tool is used to make diagnostic measurements of cdmaone, IS-2000 (cdma2000 1x), and J-STD-008 CDMA base stations over the air. The system software runs on a PC that interfaces with a digital RF receiver or a CDMA mobile phone or both.

2 The purpose of this configuration guide is to assist you in ordering the correct system configuration for your application. It is designed to be used in conjunction with the Agilent CDMA Over-Air Maintenance Tool Data Sheet (Agilent literature number E), which describes the features and functionality in detail. The Agilent CDMA Over-Air Maintenance Tool for IS-2000 is available as a receiver based system. This document is divided into six parts: Part 1. Basic description of product configuration Part 2. Software options Part 3. Receiver hardware options Part 4. Accessories Part 5. Upgrading existing systems Part 6. Ordering examples Part 6 provides the information required for upgrading existing systems. For example, if you currently own an Agilent E6474A wireless network optimization platform with only phone-based measurement capability, and you want to upgrade it to have combined phone and receiver-based measurement capability, then the information in Part 6 will assist you in ordering the necessary options. Part 1. Basic description of product configuration The E6474A system is made up of software, receiver hardware, and accessories. To order a system, you: 1. Choose the software functionality that you want (option numbers in the 150 s). 2. Choose the receiver hardware that you want (from E645XC family). 3. Choose the accessories that you want (Agilent 86154A and E6473A drive test system accessories). Each system requires an Agilent digital receiver. The system also requires a PC with Windows 95, 98, Windows ME, NT, or 2000 running the measurement software. A GPS receiver and GPS antenna are required to log the position information and provide timing for the receiver CDMA measurements. IMPORTANT: At least one software option and receiver must be ordered for the product configuration to be valid. Windows 95, 98, and NT are U.S. registered trademarks of Microsoft Corporation. 2

3 Figure 1 illustrates the process of choosing the specific options to order with your Agilent E6474A system. Decide what system functionality you want Choose software license Agilent E6474A Option 1xx Option 150 code domain power and spectrum mask Choose receiver hardware Agilent E645XC receiver E6452C cellular band receiver E6450C PCS band receiver E6457C Japan cellular band receiver These receivers include an internal GPS receiver. If desired, an external GPS receiver may be used instead. E6453C Korea PCS band receiver E6454C PCS band CDMA/GSM receiver E6456C PCS band cdma2000/umts receiver 86154A Option 010 laptop PC Choose drive test accessories 86154A Option 210 external GPS receiver with dead reckoning 86154A Option 230 differential GPS receiver 86154A Option 531 briefcase carrier E6473A Option 010 vehicle-mounted USB hub kit Place order Figure 1. Ordering decision process new systems 3

4 Part 2. Software options This part of the document assumes that you are building a new system. If you are adding functionality to an existing system, refer to Part 5, Upgrading existing systems. The following software options are available for the Agilent CDMA Over-Air Maintenance Tool: Option 150: cdmaone and cdma2000 1x code domain power and spectrum mask software license Use Table 1 to determine which software option(s) you require for your application. For a detailed description of the functionality, please refer to the Agilent CDMA Over-Air Maintenance Tool Data Sheet (Agilent literature number E). Table 1. Software functionality Desired functionality Software option(s) required cdmaone and cdma2000 1x code domain power 150 measurements and IS-97 spectrum mask capability Each software order includes the following components: CD with software and documentation Getting Started Guide software license key (attaches to PC parallel or USB port) 4

5 Part 3. Receiver hardware options This part of the document assumes that you are building a new system. If you are adding functionality to an existing system, refer to Part 5, Upgrading existing systems. The following digital receiver hardware options are available for the CDMA Over-Air Maintenance Tool: E6452C: E6450C: E6457C: E6453C: E6454C: E6456C: Cellular band digital receiver with internal GPS receiver PCS band CDMA/TDMA digital receiver with internal GPS receiver Japan cellular band receiver with internal GPS receiver Korea PCS band receiver with internal GPS receiver PCS band CDMA/GSM receiver PCS band cdma2000/umts receiver Software Option 150 is required to operate Agilent receivers. One software package can control up to four receivers. Internal GPS provides portability and simplifies system configuration. If you require dead reckoning with your GPS, use an external GPS receiver. Agilent RF E645XC receivers come with internal GPS or an external GPS can be added. Agilent offers an external GPS with dead reckoning capability. Refer to Part 4, Accessories. For receiver specifications and a detailed description of the receiver functionality, please refer to the Agilent CDMA Over-Air Maintenance Tool Data Sheet (Agilent literature number E). Select the receiver that covers the frequency band in which you want to make measurements. If you need to make measurements in more than one band, order multiple measurement receivers. Each receiver includes the following components: magnetic-mount RF antenna for the corresponding frequency band TNC-to-type N adapter for RF antenna RS-232 cable for connection to PC 1 cable for connecting in multiple receiver configuration AC/DC power supply 1 DC power cord (cigarette lighter type) 1 mounting kit (brackets and screws for mounting receiver in a vehicle) magnetic-mount GPS antenna with cable 1 Alternatively, Agilent provides optional system accessories that can be used to power and connect simultaneously up to two phones and up to two receivers to the PC. The E6473A option 010 (vehicle-mounted USB hub kit) is provided for drive testing (in-vehicle) environments. Refer to Part 4: Accessories 5

6 Part 4. Accessories Accessories for the Agilent CDMA Over-Air Maintenance Tool are ordered using the Agilent 86154A or E6473A model numbers. This model number provides an easy way to order accessories. Table 2 lists the accessories that are available. Items in column 1 would typically be ordered with a new E6474A system. Items in column 2 would typically be ordered as replacement parts, as these elements are included with new systems. Table 2. Accessories E6474A Optional system accessories Agilent 86154A E6474A Replacement accessories Agilent 86154A Option 010: Laptop PC Option 099: Multiple receiver interconnect kit Option 210: Trimble Placer GPS 455 with Option 410: PCS band magnetic-mount dead reckoning RF antenna Option 230: Differential GPS receiver Option 430: Cellular band magneticmount RF antenna Option 531: Briefcase carrier Option 510: Vehicle mounting kit E6473A Accessories Option 010: Vehicle-mounted USB hub kit For a detailed description of these accessories, please refer to the Agilent CDMA Over-Air Maintenance Tool Data Sheet (Agilent literature number E). 6

7 Part 5. Upgrading existing systems The Agilent E6474A is a scalable system. You can start with one set of capabilities and integrate additional capabilities later. For example: Start with a receiver-based system and upgrade later to include phone-based measurements. The system is made up of software, receiver hardware, and accessories. Upgrading a system is similar to building a new system. You simply order those system elements that you don t currently have. To upgrade a system: 1. Decide what system capability you want. 2. Identify the capability you currently have. 3. Choose the software options that you need to add (option numbers in the 150 s). 4. Choose the hardware options that you need to add (E645XC receivers). 5. Choose the accessories that you need to add (Agilent 86154A and E6473A drive test system accessories). Figure 2 illustrates the process of choosing the specific options to order when you are upgrading an Agilent E6474A system. The CDMA Over-Air Maintenance Tool system is completely scalable with the Agilent E6474A CDMA drive test system. For more information on related products, please refer to the literature listed at the end of this document. Upgrading existing cdmaone systems If you own an older E7490A or E7473A cdmaone system and would like to upgrade receiver hardware and/or system software to cdma2000 1x capability, choose from the following options: 86157A - Upgrades E6450B or E6452A receiver to higher performance C version. Upgrades E7473A Option 111 or E7490A Option 111 code domain power software for cdma2000 1x measurements. E6474A Option Upgrades E7473A Option 111 or E7490A Option 111 code domain power software for cdma2000 1x measurements (software requires C version receiver for these measurements) C - Upgrades E6450B or E6452A receiver to higher performance C version. 7

8 Decide what system functionality you want Identify the capability you currently have Choose software license Agilent E6474A Option 1xx Option 151 code domain power and spectrum mask Choose receiver hardware Agilent E645XC E6452C cellular band receiver E6450C PCS band receiver E6457C Japan cellular band receiver E6453C Korea PCS band receiver E6454C PCS band CDMA/GSM receiver E6456C PCS band cdma2000/umts receiver Choose drive test accessories 86154A Option 010 laptop PC 86154A Option 210 external GPS receiver with dead reckoning 86154A Option 230 differential GPS receiver 86154A Option 531 briefcase carrier E6473A Option 010 vehicle-mounted USB hub kit Place order Figure 2. Upgrade ordering decision process 8

9 Part 6. Ordering examples Table 3 lists several typical Agilent CDMA Over-Air Maintenance Tool system configurations along with the products and options that must be ordered for each configuration. This is not a complete list of all possible configurations, but it includes typical configurations to illustrate the ordering process. Table 3. Typical ordering configurations Desired system capability What to order Description Quantity Code domain power and spectrum mask system E6474A CDMA Over-Air Maintenance Tool for the cellular band with internal GPS. Option 150Code domain power and spectrum mask SW 1 Carrying case for the system. E6452C Cellular receiver with internal GPS 1 You will provide your own laptop A Drive system accessories Option 531 Briefcase carrier 1 Code domain power and spectrum mask E6474A CDMA Over-Air Maintenance Tool for the PCS band. Powered cable for Option 150Code domain power and spectrum mask SW 1 QCP2700. You want a laptop PC included E6450C PCS receiver 1 with the system A Drive system accessories Option 010 Laptop PC 1 Option 531 Briefcase carrier 1 E6473A Drive system accessories Option 010 Vehicle-mounted USB hub kit 1 Option 801 Interface cable for QCP820/1920/ Code domain power for IS-2000 and 86157A Provides software and hardware 1 spectrum mask (you already own a upgrade as described on page 7 cdmaone receiver-based system). 9

10 Additional Agilent literature Product overviews CDMA Over-Air Maintenance Tool Product Overview E E6474A Wireless Network Optimization Platform Product Overview EN OPAS32 Engineering Information Management and Analysis Software Product Overview EN Direct Connect Hub Product Overview EN Configuration guides E6474A Wireless Network Optimization Platform Configuration Guide EN OPAS32 Engineering Information Management and Analysis Software Configuration Guide EN Data sheets CDMA Over-Air Maintenance Tool Data Sheet E E7473A CDMA Drive Test System Data Sheet E Product Notes CDMA Drive Test Product Note E Using Agilent E7473A CDMA Drive Test System Product Note EN Application Notes Optimizing your CDMA Wireless Network Today and Tomorrow Using Drive Test Solutions Application Note E 10

11 11

12 For more information about related products, applications, and services visit our Web site: Agilent Technologies Test and Measurement Support, Services, and Assistance Agilent Technologies aims to maximize the value you receive, while minimizing your risk and problems. We strive to ensure that you get the test and measurement capabilities you paid for and obtain the support you need. Our extensive support resources and services can help you choose the right Agilent products for your applications and apply them successfully. Every instrument and system we sell has a global warranty. Support is available for at least five years beyond the production life of the product. Two concepts underlie Agilent's overall support policy: "Our Promise" and "Your Advantage." Our Promise Our Promise means your Agilent test and measurement equipment will meet its advertised performance and functionality. When you are choosing new equipment, we will help you with product information, including realistic performance specifications and practical recommendations from experienced test engineers. When you use Agilent equipment, we can verify that it works properly, help with product operation, and provide basic measurement assistance for the use of specified capabilities, at no extra cost upon request. Many self-help tools are available. Your Advantage Your Advantage means that Agilent offers a wide range of additional expert test and measurement services, which you can purchase according to your unique technical and business needs. Solve problems efficiently and gain a competitive edge by contracting with us for calibration, extra-cost upgrades, out-of-warranty repairs, and on-site education and training, as well as design, system integration, project management, and other professional engineering services. Experienced Agilent engineers and technicians worldwide can help you maximize your productivity, optimize the return on investment of your Agilent instruments and systems, and obtain dependable measurement accuracy for the life of those products. By internet, phone, or fax, get assistance with all your test & measurement needs Online assistance: Phone or Fax United States: (tel) Canada: (tel) (fax) (905) China: (tel) (fax) Europe: (tel) (31 20) (fax) (31 20) Japan: (tel) (81) (fax) (81) Korea: (tel) (82-2) (fax) (82-2) Latin America: (tel) (305) (fax) (305) Taiwan: (tel) (fax) (886-2) Other Asia Pacific Countries: (tel) (65) (fax) (65) tm_asia@agilent.com Product specifications and descriptions in this document subject to change without notice. Copyright 2001 Agilent Technologies Printed in U.S.A. August 30, E