Metcal MFR-2200 Series Dual Output 60W Solder / Rework Station Series
|
|
|
- Colin Boone
- 6 years ago
- Views:
Transcription
1 ual Output 60W Solder / Rework Station Series Test Equipment epot Washington Street Melrose, M TestEquipmentepot.com MFR-2200 Series Features and enefits Many options so you can create the system you need ual 60W output enables you to use two hand-pieces simultaneously. SmartHeat tips and cartridges sense the load and instantly delivers the right amount of heat to the joint. No calibration required which saves money and down-time. MFR-2200: 2 Outputs and 5 Handpiece Options: There Is System That s Right For You Metcal's MFR-2200 Soldering/esoldering Stations are powerful, cost-effective systems that have a wide variety of options and accessories to meet just about any application. The MFR-2200 power supply has 2 outputs, so your operators can use 2 hand-pieces simultaneously. 5 hand-pieces are available, including a desoldering option, so the MFR-2200 can meet just about any need. PROUCT UPTE Technical Specifications Part No. MFR-2200 Series mbient Operating Temp C ( F) Max. Enclosure Temp. 55 C (131 F) Input Line Voltage VC Power Consumption 130W Max. Input Line Frequency 50/60 Hz grounded circuit Output Power 22 C/output (2 outputs)* Output Frequency 450 KHz Power Cord (3-wire) 183cm (6 ), 18/3 SJT imensions (approx.) W x x H 170 x 200 x 152.5mm (7 x 8 x 6 ) Weight 2.97 kg (6.55 lbs) Surface Resistivity Z Ohms Certification / Marking ctuvus, CE Soldering Handle and Coil ssembly Specifications Tip-to-Ground Potential < 2 mv RMS Tip-to-Ground Resistance <2 ohms Idle Temperature Repeatability ± 1.1 C (2 F) in still air Handle Cord ssembly Length 122cm (4 ) burn proof, ES safe Connector 8-pin circular IN Workstand W x x H 100 x 200 x 100mm (4 x 8 x 4 ) Workstand Weight 0.69 kg (1.51 lbs) *RF SmartHeat Technology provides greater power. The MFR-2200 series uses SmartHeat Technology, a microprocessor controlled heating system which operates at lower temperatures and eliminates calibration time. With both soldering and desoldering capabilities, the MFR-2200 eliminates the need for two separate units. The MFR-2200 series is the best choice for small or large production environments which need a versatile soldering system with a small footprint. 5 Hand-piece Options Solder Cartridge Hand-piece (MFR-H1-SC2) Standard equipment with MFR-2210/2211 Tip Solder Hand-piece (MFR-H2-ST2) Standard equipment with MFR-2220/2222 SSC Cartridge Solder Hand-piece (MFR-H6-SSC). Can be used with cartridges from Metcal s SP200 Soldering Station. vailable as an accessory; see page 3 Precision Tweezer Solder Hand-piece (MFR-H4-TW). Standard equipment with MFR-2240/2241 esolder Hand-piece (MFR-H5-S). vailable as an accessory; see page 3 Pg 1
2 MFR-2200 Series Stations Metcal MFR-2200 Series ual 60W Solder / Rework Station Part No. Photo Qty. escription 1 MFR Solder Station w/solder Cartridge Hand-piece E MFR-PS MFR-PS2200 Power Supply (60W per output) MFR-H1-SC2 1 Soldering Cartridge Hand-piece WS1 E 1 Universal Soldering Workstand SxP & RxP Cart. G Soldering/Rework Cartridges (SOL SEPRTELY) MFR Solder Station w/2 Solder Cartridge Hand-pieces MFR-PS MFR-PS2200 Power Supply (60W per output) MFR-H1-SC2 2 Soldering Cartridge Hand-piece WS1 E 2 Universal Soldering Workstand See page 3 for additional accessories E 2 SxP & RxP Cart. G Soldering/Rework Cartridges (SOL SEPRTELY) MFR Solder Station w/solder Tip Hand-piece 3 E MFR-PS MFR-PS2200 Power Supply (60W per output) MFR-H2-ST2 C 1 Soldering Tip Hand-piece WS1 E 1 Universal Soldering Workstand SxV & CxV Tips H Soldering/lade Tips (SOL SEPRTELY) MFR Solder Station w/2 Solder Tip Hand-pieces MFR-PS MFR-PS2200 Power Supply (60W per output) MFR-H2-ST2 C 2 Soldering Tip Hand-piece Each system includes 1 Tip Cleaner per hand-piece C E 4 WS1 E 2 Universal Soldering Workstand SxV & CxV Tips H Soldering/lade Tips (SOL SEPRTELY) MFR Solder Station w/tweezer Cartridge Hand-piece MFR-PS MFR-PS2200 Power Supply (60W per output) 5 F C MFR-H4-TW 1 Tweezer Cartridges Hand-piece MFR-WSPT F 1 Tweezer Hand-piece Workstand PROUCT UPTE TxP Cartridges I Tweezer Cartridges (SOL SEPRTELY) MFR Solder Station w/solder & Tweezer Cart. Hand-piece MFR-PS MFR-PS2200 Power Supply (60W per output) MFR-H1-SC2 1 Soldering Cartridge Hand-piece MFR-H4-TW 1 Tweezer Cartridges Hand-piece WS1 C 1 Universal Soldering Workstand MFR-WSPT F 1 Tweezer Hand-piece Workstand TxP Cartridges I Tweezer Cartridges (SOL SEPRTELY) SxP & RxP Cart. G Soldering/Rework Cartridges (SOL SEPRTELY) SxP Soldering Cartridges See pg. 4 G RxP Rework Cartridges See pg. 5 SxV H Soldering Tips See pgs. 6-7 CxV lade Tips - See pg. 7 MFR-UK5 esoldering Kit - esolder Hand-piece (MFR-H5-S) and Venturi Workstand (MFR-WSSX) also available. See page 3 for additional upgrade kits. TxP Tweezer Cartridges See pg. 8 I F C 6 Unit includes a 3 position switch (left/both/right) so you can use a single hand-piece or 2 handpieces simultaneously Pg 2
3 ccessories and Replacement Parts PROUCT UPTE Pg 3
4 SxP Solder & Rework Cartridges PROUCT UPTE CHISEL HOOF SXP SOLERING & REWORK 0.04" 1mm 0.06" 1.5mm mm mm 0.08" 0.1" 2.5mm 2.0mm 0.12" 3.0mm 0.14" 3.5mm 0.2" 5mm CRTRIGES 0.36" 9.2mm 0.39" 10mm mm 0.4" 10.0mm mm.394" 10mm 0.43" 11.0mm 0.43" 11.0mm 0.3" 7.6mm Compatible with: MFR-1110, MFR-1161, MFR-1351, MFR-2211, MFR-2241 Systems and MFR-H1-SC hand-piece SFP-CH10 STP-CH10 SCP-CH10 SFP-CH15 STP-CH15 SCP-CH15 SFP-CH15 STP-CH15 SCP-CH15 SFP-CH20 STP-CH20 SCP-CH20 SFP-CHL20 STP-CHL20 SCP-CHL20 SFP-CH25 STP-CH25 SCP-CH25 SFP-CH30 STP-CH30 SCP-CH30 SFP-CH35 STP-CH35 SCP-CH35 SFP-CH50 STP-CH50 SCP-CH50 STP-WV20 SFP-WV20 SCP-WV20 STP-WV30 SFP-WV30 SCP-WV30 CONICL EVEL HOOF KNIFE SFP-CN04 STP-CN04 SCP-CN04 SFP-CN04 STP-CN04 SCP-CN04 SFP-CNL04 STP-CNL04 SCP-CNL04 SFP-CN05 STP-CN05 SCP-CN05 SFP-CN05 STP-CN05 SCP-CN05 SFP-CNL06 SCP-CNL06 SFP-VL10 STP-VL10 SCP-VL10 F = FR4 / Fiberglass, for most standard applications T = Temperature Sensitive C = Ceramic for high thermal demand applications..06" 1.5mm mm mm mm 0.02" 0.5mm 0.04" 1.0mm 0.02" 0.5mm.039" 1.0mm 0.2" 5.0mm 0.34" 8.6mm 0.6" 15.21mm 0.59" 14.9mm 0.579" 14.7mm 0.56" 14.22mm 0.6" 15.21mm.45" 11.6 mm 0.63" 16mm 60.46" 11.6mm SFP-RH05 STP-RH05 SCP-RH05 SFP-RH610 STP-RH610 SCP-RH610 SFP-RH15 STP-RH15 SCP-RH15 SFP-RH615 STP-RH615 SCP-RH615 SFP-RH35 STP-RH35 SCP-RH35 SFP-RK50 STP-RK50 SCP-RK50 Pg 4
5 RxP Rework Cartridges LE RXP REWORK CRTRIGES.02" 0.5mm.87" 22.1mm.36" 9.14mm Compatible with: MFR- 1110, MFR-1161, MFR-1351, MFR-2211, MFR-2241 Systems, MFR-H1-SC and MFR-H1-SC2 hand-pieces. ll dimensions shown are in mm (inches) RFP-L1 RCP-L1 RFP-L2 RCP-L2 RFP-L3 RCP-L3 SMT TYPE 10 (0.41) 15.6 (0.62) 22.1 (0.87) TUNNEL RFP-L1 RCP-L1 RFP-L2 RCP-L (0.204) 5.18 (0.204) (0.40) 4.32 (0.17) 3.22 (0.127) 2.29 (.09) Tunnel SOIC Tunnel SOIC-8 RFP-L3 RCP-L (.270) (0.44) 2.29 (.09) Tunnel SOIC-16 SLOT RFP-SL1 RCP-SL1 RFP-SL2 RCP-SL (.092) 3.48 (.137) 1.37 (.054) 1.63 (.064) 1.78 (.07) 1.78 (.07) 0805 Chip Package 1206 Chip Package 2 2 SMT TYPE QU 2 RFP-Q4 RCP-Q4 RFP-Q6 RCP-Q (.500) (.700) (.450) (.660) 3.81 (.150) 3.81 (.150) (.600) (.700) (.550) (.660) PLCC 32 PLCC 44 RFP-Q7 RCP-Q (.995) (.960) 5.59 (.220) (.995) (.960) PLCC 68 PROUCT UPTE 2 RFP-Q10 RCP-Q10 RFP-Q15 RCP-Q15 RFP-Q19 RCP-Q19 RFP-Q20 RCP-Q (.800) (.525) (.635) (.650) (.760) (.485) (.635) (.650) 3.81 (.150) 2.79 (.110) 3.30 (.130) 3.30 (.130) (.800) (.525) (.635) (.885) (.760) (.485) (.635) (.885) PLCC 52 TQFP 80 QFP 44 QFP 100 F = FR4 / Fiberglass, for most standard applications T = Temperature Sensitive C = Ceramic for high thermal demand applications. Pg 5
6 SxV Solder Tips PROUCT UPTE Pg 6
7 SxV Solder Tips / CxV lade Tips PROUCT UPTE Pg 7
8 TxP Tweezer Cartridges TXP TWEEZER CRTRIGES_ Compatible with: MFR-1140, MFR-2240, MFR2241 Systems and MFR-H4-TW hand-piece LE.03" 0.76mm.04" 1.0mm.03" 0.76mm.079" 2.0mm.55" 14mm.55" 14mm TFP-LP1 TTP-LP1 TCP-LP1 TFP-LP2 TTP-LP2 TCP-LP2 1.0mm x 14mm (.04" x.55") 2.0mm x 14mm (.08" x.55").015".38mm.75" 19.1mm TFP-CNP1 TTP-CNP1 TCP-CNP1 Conical 0.4mm x 19.1mm (.015" x.75") HEVY UTY 0.028" 0.57mm 0.055" 1.4mm TFP-LH40 TTP-LH40 TCP-LH40 TFP-LH50 TTP-LH50 TCP-LH50 TFP-LH60 TTP-LH60 TCP-LH mm (.25") 16mm (.62") 20.5mm (.81") PROUCT UPTE TFP-LH70 TTP-LH70 TCP-LH70 28mm (1.1") Pg 8
Metcal MFR-1100 Series 60W Single Output Solder / Rework System
60W Single Output Solder / Rework System MFR-1100 Series Features and Benefits Many options enable you to create the system you need 60W output gives you the power you need while using lower and safer
Metcal MFR-1300 Series Dual Output 60W Desolder / Solder System w/internal Pump
ual Output 60W esolder / Solder System w/internal Pump Test Equipment epot - 800.517.8431-99 Washington Street Melrose, M 02176 - TestEquipmentepot.com MFR-1300 Series Features and enefits Self-contained
Metcal MFR-1300 Series Dual Output 60W Desolder / Solder System w/internal Pump
ual Output 60W esolder / Solder System w/internal Pump MFR-1300 Series Features and enefits Self-contained internal pump and large capacity collection chamber makes desoldering easy Pistol handpiece can
MFR-PS2200 MFR-H1-SC2 MFR-H2-ST2 MFR-H4-TW WS1 MFR-WSPT
MFR-2200 Series Dual Output Simultaneous Soldering & Rework Systems The MFR-2200 Series features dual output capability allowing users to select operation of one handpiece or two hand-pieces simultaneously.
P S M F R M F R PS-900 MFR-1100 Series MFR-1300 Series NEW MX-500 Series
Hand Soldering, Desoldering & P S - 9 0 0 M F R - 1 1 0 0 M F R - 2 2 0 0 Single Port Dual Port Switchable PS-900 MFR-1100 Series MFR-1300 Series NEW MX-500 Series M U L T I F U N C T I O N NEW STYLE PS-900
Perfect for SMD Rework.
Perfect for SMD Rework. Introducing the new CV-500 Connection Validation Metcal is pleased to introduce the CV-500 Connection Validation, the companion station to the CV-5210 system. The CV-500 packs all
brand new color. Innovation has a Introducing the new CV-5200 Connection Validation Soldering Station
Innovation has a brand new color. Introducing the new CV-5200 Connection Validation Soldering Station Metcal is raising the bar with a technology that will change hand soldering forever. Metcal soldering
New MX-5000 versus Original MX-500 Systems Comparison
New MX-5000 versus Original MX-500 Systems Comparison Overview The new MX-5000 Series is the next generation of the trusted Soldering and Rework Systems from Metcal. With double the power of its predecessor,
Metcal MX User Guide. Power. Precision. Performance. Soldering, Desoldering and Rework System _4
Metcal MX-5200 Soldering, Desoldering and Rework System User Guide Power. Precision. Performance. 7000-2500_4 Test Equipment Depot - 800.517.8431-99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com
ESD WORK TABLE WITH DIGITAL REWORK STATION
ESD WORK TABLE WITH DIGITAL REWORK STATION (SMD Rework / PTH Rework) Package - 1 TIP Activator SMD Components Soldering PTH Desoldering QFP / PLCC / SOIC SOP Desoldering Fume Absorber DIGITAL REWORK STATION
EasyBraid. Why EasyBraid? Copyright EasyBraid All Rights Reserved
EasyBraid Why EasyBraid? 1 Why EasyBraid? Secured Grounding Faster Start-up Sustained Power Output Increased Plating Gold Plated Connectors Easy Color Identification Unique New Tip Profiles Quality Control
Ready-to-use package - all you need is mains input power
All inclusive package, no hassles for customer Developed from best of breed tools & accessories Covers SMD/PTH soldering & desoldering Ideal for service centers, Labs Ready-to-use package - all you need
in-built Vacuum Pick-up for large SMD ICs RS232 to USB interface for direct connection to PC
Hi-End Hi-features rich 3-in-1 SMT/PTH Rework System Model MFRS-500SUSB reliable & caring since 1976 in-built Vacuum Pick-up for large SMD ICs RS232 to USB interface for direct connection to PC LEAD RoHS
1 Tool Control Unit Ref. DI-D
www.jbctools.com 1 Tool Control Unit Ref. DI-D Packing List The following items should be included: DI Control Unit... 1 unit Ref. DI-1D (120V) DI-2D (230V) DI-9D (100V) Power Cord... 1 unit Ref. 0009417
PLUTO ELIABLE SOLDERING & REWORK STATIONS. Since 2002 PLUTO
Since 2002 SOLDERING & REWORK STATIONS R PLU TO D 7 77 UGGED ELIABLE ADICAL We are a Leading and also pioneer in indigenously deeloped soldering and de soldering station and haing a more than decade of
SPECIFICATION SHEETS REV:12 / APRIL 10
SPECIFICATION SHEETS REV:12 / APRIL 10 2 BT Soldering stations PAG.4 BD Soldering stations 5 CD-A Soldering stations 6 CF-A Soldering feed stations 7 CP-A Micro tweezer Station 8 CS/CV Desoldering stations
Premium Precision Soldering station
www.jbctools.com English Premium Precision Soldering station Ref. DIR-D 2 www.jbctools.com Packing List The following items should be included: DI Control Unit... 1 unit Ref. DI-1D (120V) DI-2D (230V)
Four-Tool Control Unit
www.jbctools.com English Four-Tool Control Unit Ref. DME-A Packing List The following items should be included: Four-Tool Control Unit... 1 unit Ref. DME-1A (120V) DME-2A (230V) DME-9A (100V) Power Cord...
ESD safe. A global organization at your service. The power of experience. High technology, superior quality
A global organization at your service JBC is a global company with a distributor network spanning 5 continents that guarantees a solid commercial organization with quick and efficient service. The power
English Nano Rework station Ref. NASE-A
English Nano Rework station Ref. NASE-A Packing List Features The following items should be included: Control Unit... 1 unit Ref. NAE-1A (10V) NAE-A (30V) NAE-9A (100V) Nano Soldering Iron Handle... 1
Introducing the. Solder Tip Cleaner. Solder Tip Cleaner AC-STC. metcal.com/stc 2017 Metcal, metcal.com
New Products 2017 Tel +44 2380 489 100 +33 1767 104 03 +49 3222 109 19 00 Email: Europe-Orders@okinternational.com www.metcal.com www.okinternational.com Solder Tip Cleaner AC-STC Part Number AC-STC AC-STC-BBRUSH
EDSYN Quality. PHONE: FAX (Sales): FAX (Service): INTERNET:
Integrated design and a unique calibration feature allow the EDSYN MCS100 master control soldering and analytical system to save you time and money when you use, test, evaluate or calibrate soldering processes.
DDE-B Robot station Ref. DDRE-B
DDE-B Robot station Ref. DDRE-B Packing List Features The following items should be included: USB-A connector 2.8 Color TFT screen 2 Tools Control Unit... 1 unit Ref. DDE-1B (120V) DDE-2B (230V) DDE-9B
Four-Tool Control Unit
English Four-Tool Control Unit Ref. DME-A Packing List Connections The following items should be included: Work simultaneously with up to 4 tools and 1 module + 1 pedal for each tool (Peripherals). Four-Tool
HPA4202 1/5. 2-Channel High Power Multi-Impedance Amplifier. General Description. Features. Applications. AtlasIED.com. HPA4202 Front.
1/5 HPA4202 2-Channel High Power Multi-Impedance Amplifier Features 70.7V/100V and 2Ω, 4Ω, and 8Ω Output 100V 70.7V 8Ω 2 x 1200W 4Ω 2Ω 2 x 2500W 8Ω BRIDGED 1 x 3800W 4Ω BRIDGED 1 x 4800W Balanced Inputs
Micro-Ohmmeter. Digital 200A. Model Measure low resistance with high accuracy
Digital 200A Micro-Ohmmeter Model 6290 Measure low resistance with high accuracy Accurately measures low contact resistances with test currents up to 200A Measures resistances up to 20mΩ Low resolution
Precision Soldering Station Ref. CD-SE
Precision Soldering Station Ref. CD-SE Packing List The following items should be included: Features CD Control Unit... 1 unit Ref. CD-1E (120V) CD-2E (230V) CD-9E (100V) Precision Purpose Handle... 1
C-Series C142 Machine Controller Eurocard DIN Packaged Systems
C-Series C142 Machine Controller Eurocard DIN Packaged Systems FEATURES: Available as 2- or 3-axes CNC Controller Remote START/STOP/RESET Bidirectional serial communication at up to 192 baud 32K of on-board
Selective Soldering. from InterSelect Germany. of Selective Soldering Machines. Perfect Service. German Quality.
The new Generation of Selective Soldering Machines Worldwide Network. Innovative Products. Perfect Service. German Quality. Selective Soldering from InterSelect Germany A wide range from a small stand-alone
EDSYN Quality. PHONE: FAX (Sales): FAX (Service): INTERNET:
When your name is on the line in today s electronics universe, precise performance and adaptability count. EDSYN is dedicated to manufacturing the world s finest quality products in accordance to the line
English Heavy Duty station Ref. HDE-A
English Heavy Duty station Ref. HDE-A Packing List The following items should be included: HDE Control Unit...1 unit Ref. HDE-1A (120V) HDE-2A (230V) HDE-9A (100V) Stand... 1 unit Ref. HD-SD HD General
ERSA i-tool The World s Most intelligent Professional Soldering Iron!
The Revolutionary ERSA i-con and i-tool: intelligent and Performing Power For the Ultimate innovation in Hand Soldering ERSA GmbH Soldering & Inspection Systems ERSA i-tool The World s Most intelligent
MS9000SE: 2 Ways Rework Station. Catalogue (Ver.1.06) Overview. Main Features;
MS9000SE: 2 Ways Rework Station. Catalogue (Ver.1.06) Overview MS9000SE is the all-round rework system which almost all SMD can be reworked. And the original ITTS auto profiler system is operates of the
EMS Plant List 23 rd November 2018 Issue 2.1
EMS Plant List Issue 2.1 Plant List Overview Surface Mount Assembly 2 x fully automated Surface Mount Lines with capacity up of 148,000 CPH and placements down to 01005 Line 1 = 38,000 CPH Line 2 = 110,000
Int883 INSTRUCTION MANUAL. IR-Preheating System BASIC TROUBLESHOOTING GUIDE. 12 Contact the vendor.
BASIC TROUBLESHOOTING GUIDE PROBLEM 1: THE UNIT HAS NO POWER 1. Check if the unit is switched ON. 2. Check the fuse. Replace with the same type if fuse is blown. 3. Check the power cord and ensure there
Strain gauge Measuring Amplifier GSV-1A8. Instruction manual GSV-1A8, GSV-1A8USB, GSV-1A16USB
Strain gauge Measuring Amplifier GSV-1A8 Instruction manual GSV-1A8, GSV-1A8USB, GSV-1A16USB GSV-1A8USB SubD1 (front side) GSV-1A8USB M12 (front side) GSV-1A16USB (rear side) GSV-1A8USB K6D (front side)
Soldering Iron Evaluation
The tests were done by an independent contract manufacturer for the purpose of evaluating for future purchases, what they have deemed to be the best soldering station, for their respective applications.
Weller WR Series Based
Integrated ESD Workstation cum SMD/PTH Rework MulfiFunction Package Allin, Complete ESD Workbench and essential tools/accessories for SMD/PTH Rework reliable & caring since 976 IEWRWPMST3MPK Integrated
English Heavy Duty station Ref. HDE-A
English Heavy Duty station Ref. HDE-A Packing List The following items should be included: HDE Control Unit...1 unit Ref. HDE-1A (120V) HDE-2A (230V) HDE-9A (100V) Stand... 1 unit Ref. HD-SD General purpose
Content. Microprocessor-controlled soldering. Micro soldering pencil. WMRP soldering pencil for RT soldering tips 12 WD 1 / WD 1000 / WD 2 4
Content Microprocessor-controlled soldering Page Micro soldering pencil Page WD 1 / WD 1000 / WD 2 4 Technical data WD 1 6 Scope of supply WD 1 6 Scope of supply WD 1000 6 Accessories WD 1/ WD 1000 6 Technical
T Q S 2 1 L H 8 X 8 1 x x
Specification Quad Small Form-factor Pluggable Plus QSFP+ TO 4xSFP+ AOC Ordering Information T Q S 2 1 L H 8 X 8 1 x x Distance Model Name Voltage Category Device type Interface LOS Temperature TQS-21LH8-X81xx
Programmable DC power supplies
3-Year Warranty Series 2260B 360W, 720W, and 1080W versions with voltages up to 800V and currents up to 108A Programmable voltage or current rise and fall times prevents damage to low impedance loads from
Believe in innovation, enjoy the power. Station Guide
Believe in innovation, enjoy the power Station Guide global organization at your service JBC is a global company with a distributor network spanning continents that guarantees a solid commercial organization
Pogo Pin / Spring Probe. Custom Configurations. Test & Burn-in (ZIF) SOCKET SOLUTIONS. Up to 40 GHz. Prototyping. Production.
, PROTOTYPING How to Choose The Right Socket Finding the right socket for your project is easy. Gathering the following key characteristics will assist you in finding the correct ET part number: 1. Pin
AOYUE INT 853A++ Pre Heating System INSTRUCTION MANUAL BASIC TROUBLESHOOTING
BASIC TROUBLESHOOTING PROBLEM 1: THE UNIT HAS NO POWER 1. Check if the unit is switched ON. 2. Check the fuse. Replace with the same type if fuse is blown. 3. Check the power cord and ensure there are
Temperature Switches
ETS 00 Series Temperature Switch for Inline and Tank Mounting Applications Description The ETS 00 is a compact electronic temperature switch with 4-digit digital display. Pressure resistant to 8700 psi,
Soldering Stations. Silver line. Fast Response. Standard Line. Active Tip. Preheating plate. FE-Soldering iron. Solder bath. max.
Soldering Stations WD WD M PUD 8 PUD 5 PU 8 supply 80 W supply 50 W supply 80 W supply 50 W supply 80 W Silver line Fast Response Standard Line WP 80 WP 0 XT soldering tips LR WSP 80 WMP NT Soldering tips
CompactBlock Guard I/O EtherNet/IP Safety Modules
Installation Instructions CompactBlock Guard I/O EtherNet/IP Safety Modules Catalog Numbers 1791ES-IB8XOBV4, 1791ES-IB16 Topic Page Important User Information 2 North American Hazardous Location Approval
4-Pole Relay. 2 Coil. [V] Hz A1 A2 60 Hz A24 A1 A20 A2
![4-Pole Relay. 2 Coil. [V] Hz A1 A2 60 Hz A24 A1 A20 A2](/thumbs/76/73938132.jpg "4-Pole Relay. 2 Coil. [V] Hz A1 A2 60 Hz A24 A1 A20 A2")
ulletin - Product Overview/Product Selection ulletin - Industrial Relay ontact cartridges convertible from.o. to.. and vice versa EM V coils Pneumatic timing unit Solid-state timing unit Overlap contacts
JBC,THE POWER OF EXPERIENCE
JBC,THE POWER OF EXPERIENCE 75years of specialised experience have placed JBC in the technological forefront for soldering equipment and tools. Innovation, efficiency and reliability are the key features
360W and 720W Programmable DC Power Supplies
3-Year Warranty Series 2260B 360W and 720W versions with voltage up to 80V and current up to 72A Combine power supplies in serial and parallel combinations to expand voltage and current outputs up to 160V
P/N: AX Applications: power gen set engine control systems oil and gas equipment automation off-highway machine automation
TECHNICAL DATASHEET #TDAX031200 11:9 CAN CONTROLLER 11 Inputs (Analog, Digital, Magnetic Pick Up, Universal Signal) 4 Relay, 4 Analog, 1 Valve Driver Outputs 2 CAN (SAE J1939) with Electronic Assistant
Field Metrology Wells
99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.testequipmentdepot.com Field Metrology Wells Technical Data Recently, we introduced Metrology Wells, which
Specifications XPA 2002, XPA 2003, XPA 2004 Series
Specifications XPA 2002, XPA 2003, XPA 2004 Series Audio Voltage gain XPA 2002, XPA 2004... 23x (27 db) /100V (ch. 1 and 2) 23x (27 db) XPA 2002-70V, (ch. 3 only) 57x (35 db) XPA 2002-100V, (ch. 3 only)
ONYX 32 MULTIFUNCTIONAL POSITIONING AND SOLDERING SYSTEM
ONYX MULTIFUNCTIONAL POSITIONING AND SOLDERING SYSTEM MACHINES.0 APPLICATION: SMT ZEVAC-LINE: ONYX The complete ONYX product line documentation is composed of the following data sheets: MACHINES.0 ACCESSORIES.0,.0
JOVY SYSTEMS. isolder-40. User Manual. Rev. 1.00
JOVY SYSTEMS isolder-40 User Manual Rev. 1.00 1 Thank you for purchasing Jovy systems isolder-40 soldering station. Please read this manual before operating the isolder-40. Keep the manual in accessible
MICROFUSION FEATURES OPTIONS CERTIFICATIONS (PENDING) THREE PHASE SCR POWER CONTROLLERS
MICROFUSION THREE PHASE SCR POWER CONTROLLERS FEATURES Auto-Ranging Input Voltage 24-600 VAC, 45-65 Hz AC Output 16, 32, 50, 80 Amps (@ 50 C 6000 ft) Control Features Microprocessor-based controller /
Powermite 599 MT Series SAS Electronic Valve Actuator 24 Vac or 24 Vdc, Proportional Control
Powermite 599 MT Series SAS Electronic Valve Actuator 24 Vac or 24 Vdc, Proportional Control Description Features Application The Powermite 599 MT Series SAS Electronic Valve Actuator requires a 24 Vac
40 & 60 Watt Models. Low Leakage Current. EN61000 Compliant. Single & Multiple Outputs. Cover Kits Available
ECM40-60 40 & 60 Watt Models Small Size 2.0 x 4.0 x 1.2 Low Leakage Current Industrial & Medical Approvals Full Load Available Convection Cooled Wide Operating Temperature 0 C to +70 C Level B Conducted
SPECIFICATION. Preliminary. TFT-LCD Monitor TITLE. Signature Date Prepared by Date
SPECIFICATION TITLE TFT-LCD Monitor MODEL NAME IDS31-070W540DVA1E Signature Date Prepared by Date Please return 1 copy for our confirmation with your signature and comments Model :IDS31-070W540DVA1E Rev.
Module 7 Electronics Systems Packaging
Module 7 Electronics Systems Packaging Component Assembly, materials for assembly and joining methods in electronics -Surface Mount technology- design, fabrication and assembly; -failures library; -materials
Features & Benefits LIGHT STRIP 15
Features & Benefits LIGHT STRIP High Output L80 Epistar SMD light source. Eco friendly UV resistant PVC materials. Max,000Lm/Meter with uniform light output. Solder free system for quick installations.
OPERATION MANUAL - DS-MOD-
Description Characteristic features Transducer electronics with current output 4...20 ma or voltage output 0...10 V For ceramic pressure sensor series DS-KE or other bridge signals Adjustment over potentiometer
Specification for temperature sensor calibration setup
1. Item description Automated Temperature calibration setup made of: A. High accuracy temperature bath with internal and external reference probe, multiple sensors insert kits, carry case and other accessories.
Dual Monitor USB-C Dock - 60W Power Delivery - 4K
Dual Monitor USB-C Dock - 60W Power Delivery - 4K Product ID: DKWG30DPHPD This USB-C dock lets you transform your Windows 10 laptop into a full-sized workstation, connecting two external monitors (DisplayPort
PRODUCT SPECIFICATION
SIM Card Connector, Hinged Type, 6 Pin, SMT, 1.85mm Profile. Page 1 SIM Card Connector, Hinged Type, 6 Pin, SMT, 1.85mm Profile. Page 2 1.0 SCOPE. This specification covers performance, tests and quality
Fluke 3000 FC Series Test Tools Technical Data
Test Equipment Depot - 800.517.8431-99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com Fluke 3000 FC Series Test Tools Technical Data Now compatible with Fluke Connect Mobile App Start building
Products, Services & Capabilities
Products, Services & Capabilities Toll Free: (800) 404-0204 U.S. Only Tel: (952) 229-8200 Fax: (952) 229-8201 email: info@ironwoodelectronics.com Overview Company Overview Founded 1986 Over 5,000 products
Programmable Dual-Range DC Power Supplies 9170B & 9180B Series
Test Equipment Depot - 800.517.8431-99 Washington Street Melrose, MA 02176 TestEquipmentDepot.com Data sheet Programmable Dual-Range DC Power Supplies 9170B & 9180B Series Outstanding performance combined
GSV-1A4 M12/2 M12/2. Highlights
GSV-1A4 M12/2 M12/2 Highlights Input sensitivity: 2mV/V; 4mV/V, 2 mv/v, 1mV/V, 0.5mV/V configurable via jumpers Output signals ±10V AND 12mA+-8mA on 15 pin Sub-D Integrated half and quarter bridge completion
MED102A. Industrial Serial to Single-mode Fiber Converter
MED102A - 0708 pg. 1 / 5 MED102A Industrial Serial to Single-mode Fiber Converter Data Rates up to 115.2 kbps 9 Mile (15 km) Range 10 to 48 VDC Input Voltage Wide Operating Temperature 2000V Isolation
Heavy Duty Differential Pressure Manometer. Model User's Guide
99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.testequipmentdepot.com Back to the Extech 407910 Product Page User's Guide Heavy Duty Differential Pressure
Micro-Ohmmeter. Digital 200A. Model Measure low resistance with high accuracy
Digital 200A Micro-Ohmmeter Model 6290 Measure low resistance with high accuracy Accurately measures low contact resistances with test currents up to 200A Measures resistances from 0 to 20mΩ Resolution
HCS-3600 / 3602 / 3604 Laboratory Grade & High RFI Immunity Switching Mode Power Supply with Rotary Encoder Control
HCS-3600 / 3602 / 3604 Laboratory Grade & High RFI Immunity Switching Mode Power Supply with Rotary Encoder Control 1. INTRODUCTION User Manual This family of efficient, upgraded SMPS with small form factor,
TECHNICAL DATASHEET #TDAX023300
Preliminary TECHNICAL DATASHEET #TDAX023300 2 Universal Inputs, Dual Universal Valve Controller 2 Universal Inputs 2-3A Outputs CAN (SAE J1939) Configurable with Electronic Assistant P/N: AX023300 Features
! Ranges from -45º to 650ºC. ! Rapid heating, cooling and settling. ! Switch test, ramp, step and preset functions
DBC SERIES DBC 150/650 Series Dry Block Temperature Calibrators 99 Washington Street Melrose, MA 02176 Fax 781-665-0780 TestEquipmentDepot.com! s from -45º to 650ºC! Rapid heating, cooling and settling!
Ordering Information. Snap Action Switch V. Model Number Legend V General Purpose Snap Action Switch. Snap Action Switch V 121
Snap ction Switch V General Purpose Snap ction Switch Industry standard design with switching currents of 10 to 21 Widely used for applications where long life expectancy and high reliability is required.
PRODUCT SPECIFICATION
SIM Card Connector, Hinged Type, 8 Pin, SMT, 1.50mm Profile. Page 1 SIM Card Connector, Hinged Type, 8 Pin, SMT, 1.50mm Profile. Page 2 1.0 SCOPE. This specification covers performance, tests and quality
i-con soldering/desoldering stations
Ersa i-con innovative technology for efficient and comfortable hand soldering Ensuring quality in lead-free soldering is a huge challenge for hand soldering. Consequently the users have a wide range of
Contacts Contact Arrangement. 8-Pole Relay. 12-Pole Relay
Bulletin -P Heavy-Duty Industrial s Product Selection DC-Operated s Rail Mount DIN Rail Mount Cat. No. Cat. No. -Pole DC-P DC-PD DC-P DC-PD -Pole DC-P DC-PD DC-P DC-PD -Pole DC-P DC-PD DC-P DC-PD DC Coil
Strain gauge Measuring Amplifier GSV-1A8. Instruction manual GSV-1A8, GSV-1A8USB, GSV-1A16USB
Strain gauge Measuring Amplifier GSV-A8 Instruction manual GSV-A8, GSV-A8USB, GSV-A6USB GSV-A8USB SubD5 (front side) GSV-A8USB M2 (front side) GSV-A6USB (rear side) GSV-A8USB K6D (front side) Version:
TEK360M series is a fan-less 300W, U-frame, switching power supply with active PFC function for medical application. Rated Output Power.
LHV POWER CORPORTION CB FETURES 300W convection cooled and 360W forced air cooling single output medical power supply ctive PFC meets Class D Conducted EMI meets CISPR/FCC Class B High Efficiency up to
CFD-S05 SERVICE MANUAL CD RADIO CASSETTE-CORDER. Australian Model Singapore Model Taiwan Model Korea Model Thai Model. Ver
SERVICE MANUAL Ver. 1.0 2010.03 Australian Model Singapore Model Taiwan Model Korea Model Thai Model CD Section TC Section Model Name Using Similar Mechanism Optical Pick-up Name Model Name Using Similar
Multi-Ways Rework Station MS9000SE
Multi-Ways Rework Station MS9000SE Air & IR heating are Possible Flat Package & Chip Components are Possible (2x2 to 50x50 & 01005(0402) to 0805(2021) All-Reworking Processes is Possible (Removing-Cleaning-Printing-Replacing-Soldering)
BGA/QFP Rework Systems
BGA/QFP Rework Systems Technical Data ESD WHA 3000P WHA 3000V WQB 4000SOPS Dimensions (B x L x H) mm: 240 x 270 x 170 240 x 270 x 101 630 x 630 x 650 Dimensions (W x L x H) inch: 9,44 x 10,63 x 6,69 9,44
Pen Vibration Meter. User's Guide. Model VB Washington Street Melrose, MA Phone Toll Free
User's Guide 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.testequipmentdepot.com Pen Vibration Meter Model VB400 Introduction Congratulations on your
Modular Power System 1200 W per mainframe GPIB
View at www.testequipmentdepot.com High Performance DC Power Supplies 1200 W per mainframe GPIB Modular system permits up to 8 outputs of 150 W per output in 4 U of rack space Reconfigure fast with easily
PowerFlex 523 AC Drive
PowerFlex 523 A rive PowerFlex 523 A drives are designed to help reduce installation and configuration time with an innovative modular design while providing just enough control for your application. These
ECF40 Series. 40 Watts. AC-DC Power Supplies. Models & Ratings. Mechanical Details
40 Watts 40 W Convection Rating 1.5 by 3 Footprint Low 1.1 Profile High Efficiency Medical and ITE pprovals High Power Density Less than 0.15 W No Load Input Power 3 Year Warranty The ECF40 series is designed
1. Table of contents History Tools Parts manipulation Soldering Soldering iron or station...
1. TABLE OF CONTENTS 1. Table of contents... 3 2. History... 15 3. Tools... 19 3.1. Parts manipulation... 19 4. Soldering... 23 4.1. Soldering iron or station... 23 4.2. Hot-air rework stations... 24 4.3.
New products Price List RECOMMENDED RETAIL PRICE IN EURO
New products Price List RECOMMENDED RETAIL PRICE IN EURO Compact stations Glass Screen CD-2BD 230V High performance soldering station T245-A Handpiece C245-903 and C245-741 Cartridges Use C245 Cartridge
USB-C to HDMI Video Adapter with USB Power Delivery - 4K 60Hz
USB-C to HDMI Video Adapter with USB Power Delivery - 4K 60Hz Product ID: CDP2HDUCP This USB-C to HDMI adapter lets you connect your laptop or MacBook with USB Type-C to an HDMI display. The video adapter
Motor protection relays
Thermal overload relays for currents between 0.09 and 420A Electronic thermal overload relays for currents between 0.4 and A Electronic thermal overload relays with selectable tripping class: 5--20-30
Wireless (WiGig) or USB-C Dual-Monitor Docking Station for Laptops - Power Delivery
Wireless (WiGig) or USB-C Dual-Monitor Docking Station for Laptops - Power Delivery Product ID: DKWG30DPHPDU This versatile laptop docking station gives you the option to dock your laptop through either
Sauter Systems
96.692/1 EYZ 292:, interface The is a interface for connecting the CASE Suite/ programming tools and the various novapro software on the management level to the EY3600 system with in a local area network
FSLP Sensor Data Sheet
Features and Benefits Description Rugged design - Over 1M The (FSLP) Sensor is Interlink's solution for capturing position and force simultaneously in compact applications. The sensor's tough, moisture
MJÖLNER 600 Microhmmeter
Microhmmeter A Megger Group Company Microhmmeter The MJÖLNER 600 is designed to measure the resistance of circuit breaker contacts, bus-bar joints, contact elements in bus-bars and other high-current links.
RN-174. WiSnap M2 Super Module. Features. Description. Applications. ~ page 1 ~ rn-174-ds v1.1 6/1/2011
WiSnap M2 Super Module Features Development board containing the RN-171 module, status LEDs, power regulator Supports chip antenna (RN-174-C), PCB Trace antenna (RN-174-P), wire antenna (RN- 174-W) and
CSI 720 Focused Infrared Welding System
CSI 720 Focused Infrared Welding System INSTRUCTION MANUAL Thank you for purchasing CSI 720 Focused Infrared Welding System. It is important to read the manual before using the equipment. Please keep manual
Over 5,000 products High Performance Adapters and Sockets Many Custom Designs Engineering Electrical and Mechanical ISO9001:2008 Registration
Overview Company Overview Over 5,000 products High Performance Adapters and Sockets Many Custom Designs Engineering Electrical and Mechanical ISO9001:2008 Registration Adapter Technology Overview Pluggable