Metcal MFR-1300 Series Dual Output 60W Desolder / Solder System w/internal Pump
|
|
- Chester Garrett
- 6 years ago
- Views:
Transcription
1 ual Output 60W esolder / Solder System w/internal Pump Test Equipment epot Washington Street Melrose, M TestEquipmentepot.com MFR-1300 Series Features and enefits Self-contained internal pump and large capacity collection chamber makes desoldering easy Pistol handpiece can easily be converted to a pencil grip SmartHeat technology operates at lower and safer temperatures and eliminates overshoot. No calibration required which saves money and down-time. PROUCT UPTE Technical Specifications Part Number MFR-1350 / MFR-1351 Input Line Voltage VC Input Line Frequency 50/60Hz Power Consumption 110W Max. (Power Supply MFR-PS1300) Output Power 60 Watts Max* Output Frequency 450 KHz Idle Tip Temperature Stability +/- 1.1 C (2 F) in Still ir mbient Operating Temperature C ( F) Maximum Enclosure Temperature 55 C (131 F) Noise level < 55 d Vacuum Suction Force 0.7 bar (21 Hg at vacuum sea level) Power Cord (3-wire) 183cm (72 ) esolder Hand-piece Cable Length 152cm (60 ), burn proof, ES safe Solder Hand-piece Cable Length 122cm (48 ), burn proof, ES safe Hand-piece Connector 8 pin power connector Tip to Ground Potential <2mV Tip to Ground Resistance <2 Ohms Surface Resistivity Ohms pprovals ctuvus, CE imensions (approx.) W x x H 170 x 200 x 152.5mm (7 x 8 x 6 ) Workstand imensions 100 x 200 x 100mm (4 x 8 x 4 ) *RF SmartHeat Technology provides greater power. Makes esoldering Clean and Easy Metcal's MFR-1300 esoldering System is a powerful, costeffective system with a small footprint. With 0.7 bar of vacuum suction force, both the MR-1350 and MR-1351 have what it takes to make through-hole desoldering clean and easy. Each system includes a esoldering Pistol with a large capacity, easy to change solder collection chamber to ensure minimum downtime. The pistol can easily be converted to a pencil grip for additional control. Metcal offers a wide range of long life desoldering tips that will keep your equipment working efficiently. The MFR-1351 unit has both desoldering and soldering capabilities, eliminating the need for two separate units. The MFR uses SmartHeat, a microprocessor controlled system which operates at lower temperatures and eliminates calibration time. The MFR-1300 series is the best choice for small or large production environments which need exceptional desoldering and soldering performance from a unit with a small footprint. Large capacity desoldering collection chamber is easy to change, reducing downtime esoldering pistol can easily be changed to a pencil grip for additional control. Pg 1
2 60W ual Output System w/internal Pump MFR-1300 Series System and ccessories Part No. Photo escription 1 MFR esolder System with Internal Pump Includes: MFR-PS1300 ual Output Power Supply MFR-H5-S esolder Hand-piece MFR-WSSU C Workstand for esolder Hand-piece XP Tips esoldering Tips (SOL SEPRTELY) C MFR esolder / Solder System with Internal Pump Includes: MFR-PS1300 ual Output Power Supply MFR-H5-S esolder Hand-piece MFR-WSSU C Workstand for esolder Hand-piece MFR-H1-SC2 E Solder Hand-piece 2 F C WS1 F Workstand for Solder Hand-piece xp Tips esoldering Tips (SOL SEPRTELY) SxP Cartridges G Soldering Cartridges (SOL SEPRTELY) RxP Cartridges H Rework Cartridges (SOL SEPRTELY) E xp esoldering Tips See pgs. 4 See page 3 for additional accessories G SxP Soldering Cartridges See pgs. 5-6 H RxP Rework Cartridges See pg. 6 MFR-PS1300 Power Supply - ual output w/3 position switch (Left/oth/Right) lso vailable - MFR-1150 esoldering / Soldering Unit lso vailable From Metcal - MFR-1150 esoldering System PROUCT UPTE MFR-1150 esoldering System includes: MFR-PS Power Supply MFR-HS-S - esolder Hand-piece MFR-WSSX - Workstand with Venturi MFR-FTKIT - ir Hose and Fittings Kit (for shop air connections) C-TC - esolder Tip Cleaner Tool Metcal also offers the MFR-1150 esloldering System - a single output system and a workstand with a built in venturi helps to efficiently eliminate unwanted solder. The workstand uses your shop air system to create a.85 bar vacuum, which helps remove and collect nonessential solder. The MFR-1150 includes a esoldering Pistol with an easy to change, large capacity solder collection chamber to ensure minimum downtime. The pistol can easily be converted to a pencil grip for additional control. Metcal offers a wide range of long life desoldering tips that will keep your equipment working efficiently. Pg 2
3 ccessories and Replacement Parts PROUCT UPTE Pg 3
4 xp esoldering Tips See pages 5-6 for SxP Soldering Cartridges and page 6 for RxP lade Rework Cartridges PROUCT UPTE Pg 4
5 SxP Soldering Cartridges PROUCT UPTE CHISEL HOOF SXP SOLERING & REWORK 0.04" 1mm 0.06" 1.5mm mm mm 0.08" 0.1" 2.5mm 2.0mm 0.12" 3.0mm 0.14" 3.5mm 0.2" 5mm CRTRIGES 0.36" 9.2mm 0.39" 10mm mm 0.4" 10.0mm mm.394" 10mm 0.43" 11.0mm 0.43" 11.0mm 0.3" 7.6mm Compatible with: MFR-1110, MFR-1161, MFR-1351, MFR-2211, MFR-2241 Systems and MFR-H1-SC hand-piece SFP-CH10 STP-CH10 SCP-CH10 SFP-CH15 STP-CH15 SCP-CH15 SFP-CH15 STP-CH15 SCP-CH15 SFP-CH20 STP-CH20 SCP-CH20 SFP-CHL20 STP-CHL20 SCP-CHL20 SFP-CH25 STP-CH25 SCP-CH25 SFP-CH30 STP-CH30 SCP-CH30 SFP-CH35 STP-CH35 SCP-CH35 SFP-CH50 STP-CH50 SCP-CH50 STP-WV20 SFP-WV20 SCP-WV20 STP-WV30 SFP-WV30 SCP-WV30 CONICL EVEL HOOF KNIFE SFP-CN04 STP-CN04 SCP-CN04 SFP-CN04 STP-CN04 SCP-CN04 SFP-CNL04 STP-CNL04 SCP-CNL04 SFP-CN05 STP-CN05 SCP-CN05 SFP-CN05 STP-CN05 SCP-CN05 SFP-CNL06 SCP-CNL06 SFP-VL10 STP-VL10 SCP-VL10 F = FR4 / Fiberglass, for most standard applications T = Temperature Sensitive C = Ceramic for high thermal demand applications..06" 1.5mm mm mm mm 0.02" 0.5mm 0.04" 1.0mm 0.02" 0.5mm.039" 1.0mm 0.2" 5.0mm 0.34" 8.6mm 0.6" 15.21mm 0.59" 14.9mm 0.579" 14.7mm 0.56" 14.22mm 0.6" 15.21mm.45" 11.6 mm 0.63" 16mm 60.46" 11.6mm SFP-RH05 STP-RH05 SCP-RH05 SFP-RH610 STP-RH610 SCP-RH610 SFP-RH15 STP-RH15 SCP-RH15 SFP-RH615 STP-RH615 SCP-RH615 SFP-RH35 STP-RH35 SCP-RH35 SFP-RK50 STP-RK50 SCP-RK50 Pg 5
6 RxP lade Rework Cartridges LE RXP REWORK CRTRIGES.02" 0.5mm.87" 22.1mm.36" 9.14mm Compatible with: MFR- 1110, MFR-1161, MFR-1351, MFR-2211, MFR-2241 Systems, MFR-H1-SC and MFR-H1-SC2 hand-pieces. ll dimensions shown are in mm (inches) RFP-L1 RCP-L1 RFP-L2 RCP-L2 RFP-L3 RCP-L3 SMT TYPE 10 (0.41) 15.6 (0.62) 22.1 (0.87) TUNNEL RFP-L1 RCP-L1 RFP-L2 RCP-L (0.204) 5.18 (0.204) (0.40) 4.32 (0.17) 3.22 (0.127) 2.29 (.09) Tunnel SOIC Tunnel SOIC-8 RFP-L3 RCP-L (.270) (0.44) 2.29 (.09) Tunnel SOIC-16 SLOT RFP-SL1 RCP-SL1 RFP-SL2 RCP-SL (.092) 3.48 (.137) 1.37 (.054) 1.63 (.064) 1.78 (.07) 1.78 (.07) 0805 Chip Package 1206 Chip Package 2 2 SMT TYPE QU 2 RFP-Q4 RCP-Q4 RFP-Q6 RCP-Q (.500) (.700) (.450) (.660) 3.81 (.150) 3.81 (.150) (.600) (.700) (.550) (.660) PLCC 32 PLCC 44 RFP-Q7 RCP-Q (.995) (.960) 5.59 (.220) (.995) (.960) PLCC 68 PROUCT UPTE 2 RFP-Q10 RCP-Q10 RFP-Q15 RCP-Q15 RFP-Q19 RCP-Q19 RFP-Q20 RCP-Q (.800) (.525) (.650) (.760) (.485) (.650) 3.81 (.150) 2.79 (.110) 3.30 (.130) 3.30 (.130) (.800) (.525) (.885) (.760) (.485) (.885) PLCC 52 TQFP 80 QFP 44 QFP 100 F = FR4 / Fiberglass, for most standard applications T = Temperature Sensitive C = Ceramic for high thermal demand applications. Pg 6
Metcal MFR-1300 Series Dual Output 60W Desolder / Solder System w/internal Pump
ual Output 60W esolder / Solder System w/internal Pump MFR-1300 Series Features and enefits Self-contained internal pump and large capacity collection chamber makes desoldering easy Pistol handpiece can
More informationMetcal MFR-2200 Series Dual Output 60W Solder / Rework Station Series
ual Output 60W Solder / Rework Station Series Test Equipment epot - 800.517.8431-99 Washington Street Melrose, M 02176 - TestEquipmentepot.com MFR-2200 Series Features and enefits Many options so you can
More informationMetcal MFR-1100 Series 60W Single Output Solder / Rework System
60W Single Output Solder / Rework System MFR-1100 Series Features and Benefits Many options enable you to create the system you need 60W output gives you the power you need while using lower and safer
More informationMFR-PS2200 MFR-H1-SC2 MFR-H2-ST2 MFR-H4-TW WS1 MFR-WSPT
MFR-2200 Series Dual Output Simultaneous Soldering & Rework Systems The MFR-2200 Series features dual output capability allowing users to select operation of one handpiece or two hand-pieces simultaneously.
More informationP S M F R M F R PS-900 MFR-1100 Series MFR-1300 Series NEW MX-500 Series
Hand Soldering, Desoldering & P S - 9 0 0 M F R - 1 1 0 0 M F R - 2 2 0 0 Single Port Dual Port Switchable PS-900 MFR-1100 Series MFR-1300 Series NEW MX-500 Series M U L T I F U N C T I O N NEW STYLE PS-900
More informationPerfect for SMD Rework.
Perfect for SMD Rework. Introducing the new CV-500 Connection Validation Metcal is pleased to introduce the CV-500 Connection Validation, the companion station to the CV-5210 system. The CV-500 packs all
More informationbrand new color. Innovation has a Introducing the new CV-5200 Connection Validation Soldering Station
Innovation has a brand new color. Introducing the new CV-5200 Connection Validation Soldering Station Metcal is raising the bar with a technology that will change hand soldering forever. Metcal soldering
More informationin-built Vacuum Pick-up for large SMD ICs RS232 to USB interface for direct connection to PC
Hi-End Hi-features rich 3-in-1 SMT/PTH Rework System Model MFRS-500SUSB reliable & caring since 1976 in-built Vacuum Pick-up for large SMD ICs RS232 to USB interface for direct connection to PC LEAD RoHS
More informationReady-to-use package - all you need is mains input power
All inclusive package, no hassles for customer Developed from best of breed tools & accessories Covers SMD/PTH soldering & desoldering Ideal for service centers, Labs Ready-to-use package - all you need
More informationNew MX-5000 versus Original MX-500 Systems Comparison
New MX-5000 versus Original MX-500 Systems Comparison Overview The new MX-5000 Series is the next generation of the trusted Soldering and Rework Systems from Metcal. With double the power of its predecessor,
More informationESD WORK TABLE WITH DIGITAL REWORK STATION
ESD WORK TABLE WITH DIGITAL REWORK STATION (SMD Rework / PTH Rework) Package - 1 TIP Activator SMD Components Soldering PTH Desoldering QFP / PLCC / SOIC SOP Desoldering Fume Absorber DIGITAL REWORK STATION
More informationMetcal MX User Guide. Power. Precision. Performance. Soldering, Desoldering and Rework System _4
Metcal MX-5200 Soldering, Desoldering and Rework System User Guide Power. Precision. Performance. 7000-2500_4 Test Equipment Depot - 800.517.8431-99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com
More informationEasyBraid. Why EasyBraid? Copyright EasyBraid All Rights Reserved
EasyBraid Why EasyBraid? 1 Why EasyBraid? Secured Grounding Faster Start-up Sustained Power Output Increased Plating Gold Plated Connectors Easy Color Identification Unique New Tip Profiles Quality Control
More informationEDSYN Quality. PHONE: FAX (Sales): FAX (Service): INTERNET:
Integrated design and a unique calibration feature allow the EDSYN MCS100 master control soldering and analytical system to save you time and money when you use, test, evaluate or calibrate soldering processes.
More informationSPECIFICATION SHEETS REV:12 / APRIL 10
SPECIFICATION SHEETS REV:12 / APRIL 10 2 BT Soldering stations PAG.4 BD Soldering stations 5 CD-A Soldering stations 6 CF-A Soldering feed stations 7 CP-A Micro tweezer Station 8 CS/CV Desoldering stations
More informationPLUTO ELIABLE SOLDERING & REWORK STATIONS. Since 2002 PLUTO
Since 2002 SOLDERING & REWORK STATIONS R PLU TO D 7 77 UGGED ELIABLE ADICAL We are a Leading and also pioneer in indigenously deeloped soldering and de soldering station and haing a more than decade of
More informationPremium Precision Soldering station
www.jbctools.com English Premium Precision Soldering station Ref. DIR-D 2 www.jbctools.com Packing List The following items should be included: DI Control Unit... 1 unit Ref. DI-1D (120V) DI-2D (230V)
More informationESD safe. A global organization at your service. The power of experience. High technology, superior quality
A global organization at your service JBC is a global company with a distributor network spanning 5 continents that guarantees a solid commercial organization with quick and efficient service. The power
More informationPogo Pin / Spring Probe. Custom Configurations. Test & Burn-in (ZIF) SOCKET SOLUTIONS. Up to 40 GHz. Prototyping. Production.
, PROTOTYPING How to Choose The Right Socket Finding the right socket for your project is easy. Gathering the following key characteristics will assist you in finding the correct ET part number: 1. Pin
More informationIntroducing the. Solder Tip Cleaner. Solder Tip Cleaner AC-STC. metcal.com/stc 2017 Metcal, metcal.com
New Products 2017 Tel +44 2380 489 100 +33 1767 104 03 +49 3222 109 19 00 Email: Europe-Orders@okinternational.com www.metcal.com www.okinternational.com Solder Tip Cleaner AC-STC Part Number AC-STC AC-STC-BBRUSH
More information1 Tool Control Unit Ref. DI-D
www.jbctools.com 1 Tool Control Unit Ref. DI-D Packing List The following items should be included: DI Control Unit... 1 unit Ref. DI-1D (120V) DI-2D (230V) DI-9D (100V) Power Cord... 1 unit Ref. 0009417
More informationEDSYN Quality. PHONE: FAX (Sales): FAX (Service): INTERNET:
When your name is on the line in today s electronics universe, precise performance and adaptability count. EDSYN is dedicated to manufacturing the world s finest quality products in accordance to the line
More informationModule 7 Electronics Systems Packaging
Module 7 Electronics Systems Packaging Component Assembly, materials for assembly and joining methods in electronics -Surface Mount technology- design, fabrication and assembly; -failures library; -materials
More informationMicro-Ohmmeter. Digital 200A. Model Measure low resistance with high accuracy
Digital 200A Micro-Ohmmeter Model 6290 Measure low resistance with high accuracy Accurately measures low contact resistances with test currents up to 200A Measures resistances up to 20mΩ Low resolution
More informationJBC,THE POWER OF EXPERIENCE
JBC,THE POWER OF EXPERIENCE 75years of specialised experience have placed JBC in the technological forefront for soldering equipment and tools. Innovation, efficiency and reliability are the key features
More informationWeller WR Series Based
Integrated ESD Workstation cum SMD/PTH Rework MulfiFunction Package Allin, Complete ESD Workbench and essential tools/accessories for SMD/PTH Rework reliable & caring since 976 IEWRWPMST3MPK Integrated
More informationi-con soldering/desoldering stations
Ersa i-con innovative technology for efficient and comfortable hand soldering Ensuring quality in lead-free soldering is a huge challenge for hand soldering. Consequently the users have a wide range of
More informationDDE-B Robot station Ref. DDRE-B
DDE-B Robot station Ref. DDRE-B Packing List Features The following items should be included: USB-A connector 2.8 Color TFT screen 2 Tools Control Unit... 1 unit Ref. DDE-1B (120V) DDE-2B (230V) DDE-9B
More informationStrain gauge Measuring Amplifier GSV-1A8. Instruction manual GSV-1A8, GSV-1A8USB, GSV-1A16USB
Strain gauge Measuring Amplifier GSV-1A8 Instruction manual GSV-1A8, GSV-1A8USB, GSV-1A16USB GSV-1A8USB SubD1 (front side) GSV-1A8USB M12 (front side) GSV-1A16USB (rear side) GSV-1A8USB K6D (front side)
More informationContent. Microprocessor-controlled soldering. Micro soldering pencil. WMRP soldering pencil for RT soldering tips 12 WD 1 / WD 1000 / WD 2 4
Content Microprocessor-controlled soldering Page Micro soldering pencil Page WD 1 / WD 1000 / WD 2 4 Technical data WD 1 6 Scope of supply WD 1 6 Scope of supply WD 1000 6 Accessories WD 1/ WD 1000 6 Technical
More informationBelieve in innovation, enjoy the power. Station Guide
Believe in innovation, enjoy the power Station Guide global organization at your service JBC is a global company with a distributor network spanning continents that guarantees a solid commercial organization
More informationJOVY SYSTEMS. isolder-40. User Manual. Rev. 1.00
JOVY SYSTEMS isolder-40 User Manual Rev. 1.00 1 Thank you for purchasing Jovy systems isolder-40 soldering station. Please read this manual before operating the isolder-40. Keep the manual in accessible
More informationEnglish Nano Rework station Ref. NASE-A
English Nano Rework station Ref. NASE-A Packing List Features The following items should be included: Control Unit... 1 unit Ref. NAE-1A (10V) NAE-A (30V) NAE-9A (100V) Nano Soldering Iron Handle... 1
More informationNew products Price List RECOMMENDED RETAIL PRICE IN EURO
New products Price List RECOMMENDED RETAIL PRICE IN EURO Compact stations Glass Screen CD-2BD 230V High performance soldering station T245-A Handpiece C245-903 and C245-741 Cartridges Use C245 Cartridge
More informationECF40 Series. 40 Watts. AC-DC Power Supplies. Models & Ratings. Mechanical Details
40 Watts 40 W Convection Rating 1.5 by 3 Footprint Low 1.1 Profile High Efficiency Medical and ITE pprovals High Power Density Less than 0.15 W No Load Input Power 3 Year Warranty The ECF40 series is designed
More informationEMS Plant List 23 rd November 2018 Issue 2.1
EMS Plant List Issue 2.1 Plant List Overview Surface Mount Assembly 2 x fully automated Surface Mount Lines with capacity up of 148,000 CPH and placements down to 01005 Line 1 = 38,000 CPH Line 2 = 110,000
More informationFour-Tool Control Unit
www.jbctools.com English Four-Tool Control Unit Ref. DME-A Packing List The following items should be included: Four-Tool Control Unit... 1 unit Ref. DME-1A (120V) DME-2A (230V) DME-9A (100V) Power Cord...
More informationOPERATION MANUAL - DS-MOD-
Description Characteristic features Transducer electronics with current output 4...20 ma or voltage output 0...10 V For ceramic pressure sensor series DS-KE or other bridge signals Adjustment over potentiometer
More informationTime Counters mini "h", DC Version
Type 633-DC Time Counters mini "h", DC Version Type 633.0 Type 633.7 Type 633.8 High shock resistance Miniature dimensions Electrical connections in standard grid Suitable for PCB mounting Machine-solderable
More informationSGD 35-M. PanelPilot Compatible Smart Graphics Display ORDERING INFORMATION FEATURES SPECIFICATIONS
PanelPilot Compatible Smart Graphics Display ORDERING INFORMATION Standard Display (Panel meter, fixing kit, quick start guide) 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431
More informationNightStar. Installation, Operation, & Maintenance Instructions M /04/2016
Installation, Operation, & Maintenance Instructions M500.140 03/04/2016 NightStar STORAGE and HANDLING The NightStar Indicator meets or exceeds all applicable specifications when shipped from the factory.
More informationOrdering Information. Snap Action Switch V. Model Number Legend V General Purpose Snap Action Switch. Snap Action Switch V 121
Snap ction Switch V General Purpose Snap ction Switch Industry standard design with switching currents of 10 to 21 Widely used for applications where long life expectancy and high reliability is required.
More informationSoldering Division: Tools & Inspection Systems
The Revolutionary ERSA i-con and i-tool: intelligent and Performing Power for the Ultimate innovation in Hand Soldering ERSA GmbH Soldering Division: Tools & Inspection Systems ERSA i-tool: The World s
More informationERSA i-tool The World s Most intelligent Professional Soldering Iron!
The Revolutionary ERSA i-con and i-tool: intelligent and Performing Power For the Ultimate innovation in Hand Soldering ERSA GmbH Soldering & Inspection Systems ERSA i-tool The World s Most intelligent
More informationACTIONI/Q Q498. DC Powered DC Input Field Configurable Isolator with Math Functions
ACTIONI/Q Q498 DC Powered DC Input Field Configurable Isolator with Math Functions Q498-0000 Provides 2 Isolated Analog Inputs, 1 Analog Output & 1 Frequency Output, as well as a Discrete Input & Output
More informationFour-Tool Control Unit
English Four-Tool Control Unit Ref. DME-A Packing List Connections The following items should be included: Work simultaneously with up to 4 tools and 1 module + 1 pedal for each tool (Peripherals). Four-Tool
More informationCurrent Loop Indicator PanelPilot Compatible Smart Graphics Display
PanelPilot Compatible Smart Graphics Display ORDERING INFORMATION Standard Display SGD 24-M42 (Panel meter, fixing kit, quick start guide) USB Cable CABLE USB A-MF (Type A to mini-b) USB Power Supply UK
More information! Ranges from -45º to 650ºC. ! Rapid heating, cooling and settling. ! Switch test, ramp, step and preset functions
DBC SERIES DBC 150/650 Series Dry Block Temperature Calibrators 99 Washington Street Melrose, MA 02176 Fax 781-665-0780 TestEquipmentDepot.com! s from -45º to 650ºC! Rapid heating, cooling and settling!
More informationPrecision Soldering Station Ref. CD-SE
Precision Soldering Station Ref. CD-SE Packing List The following items should be included: Features CD Control Unit... 1 unit Ref. CD-1E (120V) CD-2E (230V) CD-9E (100V) Precision Purpose Handle... 1
More informationThe SGD 24-M is a PanelPilot Compatible graphics display with a 320 x 240 pixel (QVGA) colour display and USB programming interface.
PanelPilot Compatible Smart Graphics Display ORDERING INFORMATION Standard Display (Panel meter, fixing kit, quick start guide) 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431
More informationTESA UPD Gauge Block Comparator with a 25 mm Measuring Span
TESA UPD Gauge Block Comparator with a 25 mm Measuring Span Direct measurement of gauge blocks with a variation in nominal length of up to 25 mm or 1 in. Allows the number of required reference gauge blocks
More informationMechanically Activated Device for Dry Run Protection in Applications with LORENTZ Solar Pump Systems
Well Probe Mechanically Activated Device for Dry Run Protection in Applications with LORENTZ Solar Pump Systems The switch can be used to detect the water level within a well. When the water level in the
More informationLuxman DML replacement manual by PE1MMK (construction)
Luxman DML replacement manual by PE1MMK (construction) 1. Dismantling Take your amplifier to a appropriate place to work on it, use a small cloth or plastic cover to place your amp on, otherwise you might
More informationField Metrology Wells
99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.testequipmentdepot.com Field Metrology Wells Technical Data Recently, we introduced Metrology Wells, which
More informationInde MFRS500 Series Based
reliable & caring since 976 Integrated SMD/PTH MultiFunction ework Packages, SMDWPMF500PK... Allin package contains all essential tools & accessories for SMD/PTH ework SMDWPMF500PK... Integrated Packages
More informationStrain gauge Measuring Amplifier GSV-1A8. Instruction manual GSV-1A8, GSV-1A8USB, GSV-1A16USB
Strain gauge Measuring Amplifier GSV-A8 Instruction manual GSV-A8, GSV-A8USB, GSV-A6USB GSV-A8USB SubD5 (front side) GSV-A8USB M2 (front side) GSV-A6USB (rear side) GSV-A8USB K6D (front side) Version:
More informationTEK360M series is a fan-less 300W, U-frame, switching power supply with active PFC function for medical application. Rated Output Power.
LHV POWER CORPORTION CB FETURES 300W convection cooled and 360W forced air cooling single output medical power supply ctive PFC meets Class D Conducted EMI meets CISPR/FCC Class B High Efficiency up to
More informationPRICE LIST 16.3 Recommended Retail Price in
PRIE LIST 16.3 Recommended Retail Price in page 4-5 D-S Precision Soldering station D- Soldering station F Solder Feed station P Micro Tweezers station S/V Desoldering stations ontrol Units page 18-19
More informationImproved performance. APR-5000-XLS System configurations and technical specifications on pages 42-43
APR-5000-XL/-XLS Advanced Package Rework System The APR-5000-XL Advanced Package Rework System provides board capability with small board precision. This system performs precise, cost effective rework
More informationSpecification for temperature sensor calibration setup
1. Item description Automated Temperature calibration setup made of: A. High accuracy temperature bath with internal and external reference probe, multiple sensors insert kits, carry case and other accessories.
More information3SM102ETT13B MEMS Microphone
MEMS Microphone Product Description The is a single chip top performing miniature analog audio IC based on CMOS foundry process. By integrating an acoustic transducer and an analog amplifier circuit into
More informationEnglish Heavy Duty station Ref. HDE-A
English Heavy Duty station Ref. HDE-A Packing List The following items should be included: HDE Control Unit...1 unit Ref. HDE-1A (120V) HDE-2A (230V) HDE-9A (100V) Stand... 1 unit Ref. HD-SD HD General
More informationWD Soldering Solutions Excellence in Performance
WD Soldering Solutions Excellence in Performance High-Power-Technology for High-Precision Results Where energy efficiency meets sensitivity Never before have the challenges in the fast-paced field of microelectronics
More informationMetaphase. MetaBright TM METAPHASER TM Model#: MP-LE1006 HIGH POWER LED LIGHT ENGINE. metaphase-tech.com. metaphase-tech.com. Technologies, Inc.
MetaBright TM METAPHASER TM Model#: MP-LE1006 HIGH POWER LED LIGHT ENGINE MetaBright TM MetaPhaser TM Model#: MP-LE1006 Industry s brightest * LED Fiber Optic Illuminator New! METAPHASER TM LED MetaBright
More informationSPECIFICATION. For SWITCHING POWER SUPPLY M/N: MPD-F113-V
SPECIFICTION For SWITCHING POWER SUPPLY M/N: MPD-F113-V Revision History REV. Oct. 1 st 2012 REV. Dec. 6 th 2012 REV. Jun. 4 th 2013 REV. Nov. 25 th 2015 Established Revised EMS performance and added mechanical
More informationHPA4202 1/5. 2-Channel High Power Multi-Impedance Amplifier. General Description. Features. Applications. AtlasIED.com. HPA4202 Front.
1/5 HPA4202 2-Channel High Power Multi-Impedance Amplifier Features 70.7V/100V and 2Ω, 4Ω, and 8Ω Output 100V 70.7V 8Ω 2 x 1200W 4Ω 2Ω 2 x 2500W 8Ω BRIDGED 1 x 3800W 4Ω BRIDGED 1 x 4800W Balanced Inputs
More informationGSV-1A4 M12/2 M12/2. Highlights
GSV-1A4 M12/2 M12/2 Highlights Input sensitivity: 2mV/V; 4mV/V, 2 mv/v, 1mV/V, 0.5mV/V configurable via jumpers Output signals ±10V AND 12mA+-8mA on 15 pin Sub-D Integrated half and quarter bridge completion
More informationMore Precision. eddyncdt // Eddy current sensors for displacement and position
More Precision eddyncdt // Eddy current sensors for displacement and position 18 High precision eddy current displacement measurement eddyncdt 00 - Micrometer accuracy - Ideal for fast measurements: Bandwidth
More information40 & 60 Watt Models. Low Leakage Current. EN61000 Compliant. Single & Multiple Outputs. Cover Kits Available
ECM40-60 40 & 60 Watt Models Small Size 2.0 x 4.0 x 1.2 Low Leakage Current Industrial & Medical Approvals Full Load Available Convection Cooled Wide Operating Temperature 0 C to +70 C Level B Conducted
More informationCSI 720 Focused Infrared Welding System
CSI 720 Focused Infrared Welding System INSTRUCTION MANUAL Thank you for purchasing CSI 720 Focused Infrared Welding System. It is important to read the manual before using the equipment. Please keep manual
More information1280 Enterprise Series Programmable Color Touchscreen Weight Indicator/Controller
1280 nterprise Series 520 Panel Mount Standard Features 7-inch Touch-only Seven-inch, 800 x 480 pixel, graphical color display that adjusts for ambient light conditions Twelve-inch, 1280 x 800 pixel, graphical
More informationInt883 INSTRUCTION MANUAL. IR-Preheating System BASIC TROUBLESHOOTING GUIDE. 12 Contact the vendor.
BASIC TROUBLESHOOTING GUIDE PROBLEM 1: THE UNIT HAS NO POWER 1. Check if the unit is switched ON. 2. Check the fuse. Replace with the same type if fuse is blown. 3. Check the power cord and ensure there
More informationSPECIFICATION Of CMOS MEMS Analog Microphone. Model No.: JL-M2417
SPECIFICATION Of CMOS MEMS Analog Microphone ( RoHS Compliance ) : : ISSUED BY J.C 09-27-2012 CHECKED BY APPROVED BY Version 00 Pages 1 / 11 Revision History Version Description Date Author Approved 00
More informationSoldering Iron Evaluation
The tests were done by an independent contract manufacturer for the purpose of evaluating for future purchases, what they have deemed to be the best soldering station, for their respective applications.
More informationPen Vibration Meter. User's Guide. Model VB Washington Street Melrose, MA Phone Toll Free
User's Guide 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.testequipmentdepot.com Pen Vibration Meter Model VB400 Introduction Congratulations on your
More informationMS9000SE: 2 Ways Rework Station. Catalogue (Ver.1.06) Overview. Main Features;
MS9000SE: 2 Ways Rework Station. Catalogue (Ver.1.06) Overview MS9000SE is the all-round rework system which almost all SMD can be reworked. And the original ITTS auto profiler system is operates of the
More information3SM102E4T12A MEMS Microphone
MEMS Microphone Product Description The is a monolithic MEMS top performing miniature analog microphone based on CMOS foundry process. By integrating an acoustic transducer and an analog amplifier circuit
More informationMotor protection circuit breakers
R Motor protection circuit breakers Motor protection circuit breakers are used for start-up and protection of electric motors (industry, small machines, external use, agricultural machines, compressors,
More informationModel 620A Maintenance and Calibration
Model 0A Maintenance and Calibration CAUTION! See Ch Pg, A & B below prior to connecting inputs to TB of the A PCB. Determine Rev. of the A board on the Model 0/0A for correct input connections. Failure
More informationMODEL: R1M-D1. PC Recorders R1M Series. SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.)
PC Recorders R1M Series PC RECORDER (contact output, 32 points) Functions & Features Industrial recorder on PC 32-point open collector outputs Easy system expansion via Modbus RTU Recorded data exportable
More information3SM102E4T13B MEMS Microphone
MEMS Microphone Product Description The is a monolithic MEMS top performing miniature analog microphone based on CMOS foundry process. By integrating an acoustic transducer and an analog amplifier circuit
More informationAssembly. 1 Compact version with valve plug 2 Short tube version with cable 3 Compact version with M12 plug 4 Short tube version with M12 plug
Vibration Limit Switch Features Limit switch for liquids External function test with test magnet Onsite function check possible thanks to LED indication Large selection of process connections for hassle-free
More informationRN-174. WiSnap M2 Super Module. Features. Description. Applications. ~ page 1 ~ rn-174-ds v1.1 6/1/2011
WiSnap M2 Super Module Features Development board containing the RN-171 module, status LEDs, power regulator Supports chip antenna (RN-174-C), PCB Trace antenna (RN-174-P), wire antenna (RN- 174-W) and
More informationAOYUE INT 853A++ Pre Heating System INSTRUCTION MANUAL BASIC TROUBLESHOOTING
BASIC TROUBLESHOOTING PROBLEM 1: THE UNIT HAS NO POWER 1. Check if the unit is switched ON. 2. Check the fuse. Replace with the same type if fuse is blown. 3. Check the power cord and ensure there are
More informationAdvance Package Rework Systems. Test Equipment Depot Washington Street Melrose, MA TestEquipmentDepot.
Advance Package Rework Systems Test Equipment Depot - 800.517.8431-99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com T o o l s f o r T e c h n o l o g y OK International has been a leading
More informationMicro-Ohmmeter. Digital 200A. Model Measure low resistance with high accuracy
Digital 200A Micro-Ohmmeter Model 6290 Measure low resistance with high accuracy Accurately measures low contact resistances with test currents up to 200A Measures resistances from 0 to 20mΩ Resolution
More informationPremium 4 Tools Rework station with Electric Pump Ref. DMSE-A
Premium 4 Tools Rework station with Electric Pump Ref. DMSE-A Packing List The following items should be included: DR560 Accessories Ref. 0010211 DME Control Unit... 1 unit Electric Desoldering Tip Cleaner...1
More informationProducts, Services & Capabilities
Products, Services & Capabilities Toll Free: (800) 404-0204 U.S. Only Tel: (952) 229-8200 Fax: (952) 229-8201 email: info@ironwoodelectronics.com Overview Company Overview Founded 1986 Over 5,000 products
More informationJadis I-35. Owner's Manual. Integrated amplifier
Jadis I-35 Integrated amplifier Owner's Manual Table of contents Introduction Warning Unpacking and checking Description Installation instruction Tube position How to match your amplifier to your loudspeaker
More informationBGA/QFP Rework Systems
BGA/QFP Rework Systems Technical Data ESD WHA 3000P WHA 3000V WQB 4000SOPS Dimensions (B x L x H) mm: 240 x 270 x 170 240 x 270 x 101 630 x 630 x 650 Dimensions (W x L x H) inch: 9,44 x 10,63 x 6,69 9,44
More informationFlow measurement FlexFlow PF20S Flow sensor for industrial applications
Product highlights Parallel measurement of flow and temperature Flow measurement independent of the mounting position Large measuring range up to 400 cm/s Measurement at high media temperatures up to 125
More informationOrchestra Orchestra reference
Orchestra Orchestra reference Integrated amplifier Owner's Manual Table of contents Introduction Warning Unpacking and checking Description Installation instruction Tube position How to match your amplifier
More information3SM102EZT13C MEMS Microphone
Product Description The brings excellent performance on the applications of ANC headphone, TWS headset, Beam-forming device and Voice Recognition device by the unique features of tiny package size, flat
More informationC-300 Preamplifier User s guide
C-300 Preamplifier User s guide C-300 Preamplifier User s guide Specifications: Contents: Output: Max 7.5Vrms unbalanced (RCA) or 15Vrms balanced (XLR) SPECIFICATIONS Page 2 Phono: istortion, line stage:
More informationModular Power System 1200 W per mainframe GPIB
View at www.testequipmentdepot.com High Performance DC Power Supplies 1200 W per mainframe GPIB Modular system permits up to 8 outputs of 150 W per output in 4 U of rack space Reconfigure fast with easily
More informationCompact data logger offering best-in-class noise resistance and communication function
T M Portable Data Station XL100 Series Compact data logger offering best-in-class noise resistance and communication function A world s first in measuring instruments! To obtain IPv6 Ready Logo Phase-1
More informationMax Output Power Voltage. Convection Forced Convection Forced Nom Peak (2) Model Number (1)
C-DC Power Supplies 500 Watts Convection/Forced-cooled Ratings Universal 85-264 VC Input IT & Medical Safety pprovals < 0.5 W Standby Power -40 C to +70 C Operation Remote On/Off 5 V/2 Standby Output 3
More informationDesolder. Lift. Position. SOLDER. WTQB1000 rework system
Desolder. Lift. Position. SOLDER. WTQB1000 rework system 1 Freely positionable arm with exchangeable attachments The arm can be positioned completely freely. Components are positioned using three XYZ control
More informationBT3563/BT3562/3561. BATTERY HiTESTER
99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.testequipmentdepot.com BATTERY HiTESTER BT3563/BT3562/3561 Component measuring instruments Simultaneous
More informationSOFIX - A fully shielded front IO solution. Product Presentation
- A fully shielded front IO solution Product Presentation Product Description SOFIX is a front IO interconnection system comprised of R/A headers and cable plugs, suitable for the distribution of power
More information