The Linux Boot Process
|
|
- Delilah Armstrong
- 6 years ago
- Views:
Transcription
1 The Linux Boot Process Dr. Billy Harris -- Linux booting -- init/services configuration Copyright 2002 Billy Harris You are welcome to use and distribute this document so long as you retain this copyright message.
2 Basic Input/Output System
3 Basic Input/Output System POST power-on self test Video BIOS VGA = 320x200, 256 colors Memory test Device initialization Basic disk drivers Setup Executes code from the MBR
4 Master Boot Record Very first block of disk holds a boot loader. The purpose of the boot loader is to load an operating system. It has 512 bytes for code to do this.
5 Master Boot Record Very first block of disk holds a boot loader. The purpose of the boot loader is to load an operating system. It has 512 bytes for code to do this. Minus whatever it uses to maintain the partition table. Under Windoze systems, the MBR is very simple it simply loads specified blocks from the disk and JMPs to begin executing.
6 Grand Unified Boot Loader
7 Grand Unified Boot Loader GRUB Mounts the boot partition [normally referenced as /boot] Configuration is stored as an ordinary text file on the disk. Despite its name, it is still x86 specific, and does not support any of the BSD distributions.
8 Other Boot Loaders /boot/loader for BSD systems LILO [older Linux boot loader] aboot, elilo, milo All have one purpose: Load Linux
9 Linux Kernel The kernel is the operating system Memory management Interprocess communication File I/O Various device drivers.
10 Linux Kernel Linux uses a modular kernel, which means that device drivers can be added and removed without rebooting the system. But what about device drivers that are needed to boot the system (SCS I?) -- Initial ramdisk [initrd] holds copies of these modules and is also loaded by the boot loader.
11 Linux Booting The kernel loads init init launches a whole bunch of programs including a variant of getty. getty runs login login su's to the user, and executes the user s shell. --slight variations if you use an Xwindows-based login.
12 Files which Modify Boot Behavoir /nologin disables non-root logins. /fastboot disabled fsck /forcefsck requires fsck /.autofsck requires fsck
13 Configuring Init
14 Old Days Shell scripts init would execute rc, then rc.local Wanted a new web server? Edit rc.local. Wanted a new ftp server? Edit rc.local. Ranted to replace old web server with a new one? Edit rc.local
15 System V Conceptually much more complicated Each service provides a shell script which lives in the init.d directory, and can start, stop, or restart the service. The system uses different run levels to determine which services to start and stop.
16 Run Levels Run Level 0: System halt Run Level 1 [S]: Single User Run Level 3: Multi-user; text login Run Level 5: Multi-user; graphical login Run Level 6: System reboot Also have two customized run levels, A and B, which start or stop services, but do not change the actual run level.
17 Init Scripts # cd /etc/init.d # ls anacron gpm kdcrotate atd halt keytable autofs httpd killall netfs random sshd crond identd kudzu functions iptables lpd #./atd status atd (pid 883) is running... #./lpd stop Stopping lpd: [ OK ]
18 Service # service httpd restart Stopping httpd: [ OK ] Starting httpd: [ OK ] Can also use service --status-all service httpd --full-restart
19 Services & Run Levels How does init know which services to start/stop? We still have rc.sysinit, rc, and rc.local. Better method: each run level has a directory. Each directory has symbolic links to the init.d scripts The name of the link determines whether the service should be started/stopped.
20 Services & Run Levels # cd /etc/rc.d/rc3.d # ls K05saslauthd S13portmap S55sshd K65identd S17keytable S56rawdevices S05kudzu S20random S56xinetd S08iptables S25netfs S58ntpd S10network S26ups S60lpd S12syslog S28autofs S78mysqld # ls -al S60lpd lrwxrwxrwx S60lpd ->../init.d/lpd
21 Telinit Use telinit to change run levels Examine each K script. If the system is running, execute the script with stop Examine each S script. If the system is not running, execute the script with start How does init know whether or not the system is running?
22 Configuring Services The RPMS should install the scripts you need. After installing, a simple # service <name> start should work. Similarly, you can stop a service and use rpm -e to remove it from your system.
23 Chkconfing Chkconfig will add/remove the symbolic links for you. # chkconfig --level 345 ntpd on # chkconfig --list ntpd ntpd 0:off 1:off 2:off 3:on 4:on 5:on 6:off Can also use --del to remove the links entirely [but the script is still in init.d] or --add to add a new service. How does chkconfig know what number to use for the S and K links?
24 Chkconfing Chkconfig will add/remove the symbolic links for you. # chkconfig --level 345 ntpd on # chkconfig --list ntpd ntpd 0:off 1:off 2:off 3:on 4:on 5:on 6:off Can also use --del to remove the links entirely [but the script is still in init.d] or --add to add a new service. How does chkconfig know what number to use for the S and K links?
25 Chkconfing [init.d]# more sshd #!/bin/bash # # Init file for OpenSSH server daemon # # chkconfig: # description: OpenSSH server daemon
26 ntsysv Redhat Service Confifuration menu-based text program redhat-configure-services GNOME based program. Both give a list of possible services; you can check/uncheck to enable/disable.
27 Inittab # # inittab This file describes # the system in a id:5:initdefault: # Trap CTRL-ALT-DELETE ca::ctrlaltdel:/sbin/shutdown -t3 -r now l2:2:wait:/etc/rc.d/rc 2 1:2345:respawn:/sbin/mingetty tty1 x:5:respawn:/etc/x11/prefdm -nodaemon
System Administration. Startup Process
System Administration Startup Process Why Care? Every process on your system comes about by following a specific chain of events from the machine startup You may want to disable processes You may want
More informationCertification. System Initialization and Services
Certification System Initialization and Services UNIT 3 System Initialization and Services UNIT 3: Objectives Upon completion of this unit the student should be able to: Describe BIOS functions with respect
More informationRHCE BOOT CAMP. The Boot Process. Wednesday, November 28, 12
RHCE BOOT CAMP The Boot Process OVERVIEW The boot process gets a machine from the useless off state to the feature rich operating system we all know and love Requires cooperation between hardware and software
More informationgrub-md5-crypt --help Usage: grub-md5-crypt [OPTION] Encrypt a password in MD5 format.
(OS Hardening). Minimal.1. grub.2..3. DVD Update.4. root ssh.5 kernel grub kernel.6. comment vi /etc/grub.conf # grub.conf generated by anaconda # # Note that you do not have to rerun grub after making
More informationIntroduction to Linux start-up. Hao-Ran Liu
Introduction to Linux start-up Hao-Ran Liu Boot process overview Hardware startup BIOS LILO or bootsect.s Linux kernel Mount root file system /sbin/init LILO is a versatile boot loader, but it is functional-equivalent
More informationHOW LINUX BOOTS. As it turns out, there isn t much to the boot process:
3 HOW LINUX BOOTS You now know the physical structure of a Linux system, what the kernel is, and how to work with processes. This chapter teaches you how the system starts (boots) that is, how the kernel
More informationPL-I Assignment Broup B-Ass 5 BIOS & UEFI
PL-I Assignment Broup B-Ass 5 BIOS & UEFI Vocabulary BIOS = Basic Input Output System UEFI = Unified Extensible Firmware Interface POST= Power On Self Test BR = Boot Record (aka MBR) BC =Boot Code (aka
More informationThe Linux IPL Procedure
The Linux IPL Procedure SHARE - Tampa February 13, 2007 Session 9274 Edmund MacKenty Rocket Software, Inc. Purpose De-mystify the Linux boot sequence Explain what happens each step of the way Describe
More informationCSE 265: System and Network Administration
CSE 265: System and Network Administration System startup and shutdown Bootstrapping Booting PCs Boot loaders Booting into single user mode Startup scripts Rebooting and shutting down Bootstrapping i.e.,
More informationCSE 265: System and Network Administration
CSE 265: System and Network Administration System startup and shutdown Bootstrapping Booting PCs Boot loaders Booting into single user mode Startup scripts Rebooting and shutting down Bootstrapping i.e.,
More informationInitialization: runlevels
Initialization: init The init process is always the first started (has a PID of 1) and will remain running until the system is shut down With init running, the kernel moves to the background awaiting system
More informationUsing grub to Boot various Operating Systems
Operating Systems and Systems Integration Using grub to Boot various Operating Systems Contents 1 Aim 2 2 What You Will Do 2 3 Background 2 3.1 Installing grub in MBR from a floppy, and from the OS........
More informationChapter 2 Booting Up and Shutting Down
Chapter 2 Booting Up and Shutting Down Boot Up? 2 Shut Down? 3 Booting Up Starting up a computer Load kernel into memory and execute it. (1) BIOS load and run the MBR (Master Boot Record) (2) MBR searches
More informationLPIC 102. be familiar with standard runlevels in a Linux system
LPIC 102 The boot process, init and runlevels 1 Aim After successfully working through this exercise, You will: be familiar with standard runlevels in a Linux system be able to rescue a system without
More informationBooting Up and Shutting Down. lctseng / Liang-Chi Tseng
Booting Up and Shutting Down lctseng / Liang-Chi Tseng Booting Up Starting up a computer Load kernel into memory and execute it. (1) BIOS load and run the MBR (Master Boot Record) (2) MBR searches for
More informationBooting: ROM vs RAM The term random access memory is somewhat misleading because DRAM, SRAM and ROM all qualify as random access memories We will
Booting Main memory stores the OS The OS needs to be in memory and running for us to be able to start and run other processes Main memory is volatile turn off the power and you lose the contents When you
More informationBooting up and Shutting down A primer for troubleshooting
Booting up and Shutting down A primer for troubleshooting In this section, we touch upon the startup and shutdown process on Linux. It is beyond the scope of this course to cover this topic in depth and
More informationLinux+ Guide to Linux Certification, Third Edition. Chapter 2 Linux Installation and Usage
Linux+ Guide to Linux Certification, Third Edition Chapter 2 Linux Installation and Usage Objectives Install Red Hat Fedora Linux using good practices Outline the structure of the Linux interface Enter
More informationMODULE 02. Installation
MODULE 02 Installation Identify the type of system, hardware, and network settings necessary for Linux installation Describe the need for pre-installation procedures Identify the different types of file
More informationBooting Up and Shutting Down
Booting Up and Shutting Down Booting Up Starting up a computer Load kernel into memory and execute it. (1) BIOS load and run the MBR (Master Boot Record) (2) MBR searches for the bootable slice (partition)
More informationITDUMPS QUESTION & ANSWER. Accurate study guides, High passing rate! IT dumps provides update free of charge in one year!
ITDUMPS QUESTION & ANSWER Accurate study guides, High passing rate! IT dumps provides update free of charge in one year! HTTP://WWW.ITDUMPS.COM Exam : 1Z0-100 Title : Oracle Linux 5 and 6 System Administration
More informationThe Early System Start-Up Process. Group Presentation by: Tianyuan Liu, Caiwei He, Krishna Parasuram Srinivasan, Wenbin Xu
The Early System Start-Up Process Group Presentation by: Tianyuan Liu, Caiwei He, Krishna Parasuram Srinivasan, Wenbin Xu 1 Boot Process Booting is the initialization of a computerized system In Linux,
More informationMore on file systems, Booting Todd Kelley CST8177 Todd Kelley 1
More on file systems, Booting Todd Kelley kelleyt@algonquincollege.com CST8177 Todd Kelley 1 bind mounts quotas Booting process and SysVinit Installation Disk rescue mode 2 A bind mount is used to mount
More informationLinux/Citrix Virtual Environment Documentation
Linux/Citrix Virtual Environment Documentation Purpose This document provides information on creating a bootable Ubuntu flash drive, customizing the interface, and using basic commands. Contents Bootable
More informationGlobal Navigator Server Installation Manual
Global Navigator Server Installation Manual February, 2005 NDA-30338, Revision 4 Liability Disclaimer NEC Unified Solutions, Inc. reserves the right to change the specifications, functions, or features,
More informationRAP Installation README
RAP Installation README (Redhat 9.x as platform) 1. Hardware System requirement CPU P3 100 + RAM 512M + Hard Disk (None SCSI) 20G+ Network Ports: 10/100/1000 1+ (HA and Clustering need 2+) CDROM System
More informationManaging the Linux Boot Process
Managing the Linux Boot Process CHAPTER 6 In this chapter, you will learn about The Linux boot process Configuring the bootloader Managing Linux runlevels Shutting down the system In the preceding chapter,
More informationAdvanced Operating Systems and Virtualization. Alessandro Pellegrini A.Y. 2017/2018
Advanced Operating Systems and Virtualization Alessandro Pellegrini A.Y. 2017/2018 Basic Information Lecture Schedule: Course begins today! Course ends on June 1 st Lecture slots: Tuesday, 08.00 am 10.00
More informationMore on file systems, Booting Todd Kelley CST8177 Todd Kelley 1
More on file systems, Booting Todd Kelley kelleyt@algonquincollege.com CST8177 Todd Kelley 1 bind mounts quotas Booting process and SysVinit Installation Disk rescue mode 2 A bind mount is used to mount
More informationChapter 6. Boot time configuration. Chapter 6 Boot time configuration
Chapter 6. Boot time configuration Chapter 6 Boot time configuration Last revised: 20/6/2004 Chapter 6 Outline In this chapter we will learn about: How the system boots How to configure the boot loaders
More informationThe kernel is not to be confused with the Basic Input/Output System (BIOS).
Linux Kernel The kernel is the essential center of a computer operating system, the core that provides basic services for all other parts of the operating system. A kernel can be contrasted with a shell,
More informationRunlevels, System Shutdown and Reboot
Information These notes were originally written in the year 2000 as part of a set of LPI Exam 101 training materials. The LPI training course at Bromley College was subsequently discontinued and some of
More informationUniversity of Pennsylvania Zachary Goldberg. CIS c. More Kernel Bits. 10/03/09 Slide 1
More Kernel Bits 10/03/09 Slide 1 Rebooting Why would one ever need to reboot on Linux? Installing new driver?... (No) Installing new applications?... (No) Installing new... Anything?... (No) Reconfiguring...
More informationRedHat. Rh202. Redhat Certified Technician on Redhat Enterprise Linux 4 (Labs)
RedHat Rh202 Redhat Certified Technician on Redhat Enterprise Linux 4 (Labs) http://killexams.com/exam-detail/rh202 QUESTION: 156 Who ever creates the files/directories on /data group owner should be automatically
More informationIntegrated Lights-Out 3 Virtual Serial Port configuration and operation
Integrated Lights-Out 3 Virtual Serial Port configuration and operation HOWTO, 6 th Edition Introduction... 2 Conceptual overview... 2 Security... 3 Configuration... 4 Configuring VSP in the host system
More information. Fill in the Blank: A directory named mydir has just been... Points:10. Add Question Success: 64 questions added as a copy.
. Fill in the Blank: A directory named mydir has just been... Success: 64 questions added as a copy. A directory named mydir has just been created with the touch command. Nochmod commands have been issued
More informationBoot Process in details for (X86) Computers
Boot Process in details for (X86) Computers Hello,,, Let's discuss what happens between the time that you power up your PC and when the desktop appears. In fact we should know that the boot process differs
More informationBoot. How OS boots
Boot How OS boots 67 1 Booting sequence 1. Turn on 2. CPU jump to address of BIOS (0xFFFF0) 3. BIOS runs POST (Power-On Self Test) 4. Find bootable devices 5. Loads and execute boot sector from MBR 6.
More informationCST8177 Linux II. Linux Boot Process
CST8177 Linux II Linux Boot Process Reference information from the text, http://www.linuxdoc.org and several other web sites Linux Boot Process Topics covered in this slide-set Basic definition of the
More informationUnit 2 System startup and shutdown
Unit 2 System startup and shutdown Course materials may not be reproduced in whole or in part without the prior written permission of IBM. 5.2 Unit objectives After completing this unit, you should be
More informationCompTIA Linux+/LPIC-1 COPYRIGHTED MATERIAL
CompTIA Linux+/LPIC-1 COPYRIGHTED MATERIAL Chapter System Architecture (Domain 101) THE FOLLOWING COMPTIA LINUX+/LPIC-1 EXAM OBJECTIVES ARE COVERED IN THIS CHAPTER: 101.1 Determine and Configure hardware
More informationOperating System Kernel and the boot process
Operating System Kernel and the Nick Urbanik Copyright Conditions: GNU FDL (seehttp://www.gnu.org/licenses/fdl.html) A computing department I ver. 1.3 Operating System Kernel and Booting
More informationNETW 110 Lab 3 Post-Installation Configuration Page 1
NETW 110 Lab 3 Post-Installation Configuration Page 1 Objective At the conclusion of this lab, the student will learn some very basic functions of vi, use vi to perform some post-installation configuration
More informationThe table below lists the domains measured by this examination and the extent to which they are represented in the examination.
Introduction The Linux+ Certification is designed to measure the competencies of the Linux Professional with six to twelve months experience with the Linux operating system. This person provides basic
More informationLPI EXAM LPI Level 1 Exam 101, Junior Level Linux Certification, Part 1 of 2. Buy Full Product.
LPI EXAM - 101-350 LPI Level 1 Exam 101, Junior Level Linux Certification, Part 1 of 2 Buy Full Product http://www.examskey.com/101-350.html Examskey LPI 101-350 exam demo product is here for you to test
More informationRed Hat Enterprise Linux 3. Reference Guide
Red Hat Enterprise Linux 3 Reference Guide Red Hat Enterprise Linux 3: Reference Guide Copyright 2003 by Red Hat, Inc. Red Hat, Inc. 1801 Varsity Drive Raleigh NC 27606-2072 USA Phone: +1 919 754 3700
More informationRH-202. RedHat. Redhat Certified Technician on Redhat Enterprise Linux 4 (Labs)
RedHat RH-202 Redhat Certified Technician on Redhat Enterprise Linux 4 (Labs) Download Full Version : https://killexams.com/pass4sure/exam-detail/rh-202 QUESTION: 159 Install the dialog-* Questions asking
More informationITEC451 Network Design & Analysis Laboratory Guide: Appendix
Linux Guide Accessing the command prompt Before you can access the command prompt, you must login to the system. The administrative user on Linux machines is named root. On most Linux distributions, you
More informationOracle 1Z Enterprise Linux System Administration. Download Full Version :
Oracle 1Z0-403 Enterprise Linux System Administration Download Full Version : http://killexams.com/pass4sure/exam-detail/1z0-403 B. It does not provide any protection to remote X connections. C. It allows
More informationRH133. Red Hat Linux System Administration
RH133 Red Hat Linux System Administration Version 3.5 QUESTION NO: 1 RH133 John works as a Network Administrator for Perfect Solutions Inc. The company has a Linux-based network. He is working as a root
More informationAutomating Linux App Startup
Automating Linux App Startup David Boyes Sine Nomine Associates Agenda Runlevels, init, and symlinks, oh, my! Sequence of events during startup A sample application startup script Caveats on insserv, yast
More informationttylinux User Guide pc i Maintained by Douglas Jerome Based on Previous Work by Pascal Schmidt April 8, 2012
ttylinux User Guide pc i486 14.0 Maintained by Douglas Jerome Based on Previous Work by Pascal Schmidt April 8, 2012 Contents i Contents 1 Introduction 1 1.1 ttylinux Overview...........................................
More informationIntroduction to Linux Init Scripts
Introduction to Linux Init Scripts In this session we will cover the Linux initialization process, run levels, how to change the run level and how to initialize a script on login. LAB: http://processors.wiki.ti.com/index.php/sitara_linux_training:_init_scripts
More informationAdvanced Unix System Administration
Advanced Unix System Administration Lecture 5 February 14, 2007 Steven Luo Shared Libraries The dynamic linker Binaries have a symbol table containing functions, etc. and
More informationBasic UNIX system administration
Basic UNIX system administration CS 2204 Class meeting 14 *Notes by Doug Bowman and other members of the CS faculty at Virginia Tech. Copyright 2001-2003. System administration Thus far, we ve only discussed:
More informationminit Felix von Leitner September 2004 minit
minit Felix von Leitner felix-minit@fefe.de September 2004 minit What is this all about? This talk is about a new init program called minit. Several itches needed scratching: 1. Typical Linux distributions
More informationFile System Hierarchy Standard (FHS)
File System Hierarchy Standard (FHS) Filesystem hierarchy standard describes directory structure and its content in Unix and Unix like operating system. It explains where files and directories should be
More informationSUSE Advanced Troubleshooting: The Boot Process Lecture
SUSE Advanced Troubleshooting: The Boot Process Lecture SUS21 Novell Training Services ATT LIVE 2012 LAS VEGAS www.novell.com Proprietary Statement Copyright 2011 Novell, Inc. All rights reserved. Novell,
More informationInitial Bootloader. On power-up, when a computer is turned on, the following operations are performed:
Initial Bootloader Introduction On power-up, when a computer is turned on, the following operations are performed: 1. The computer performs a power on self test (POST) to ensure that it meets the necessary
More informationHow to Use This Lab Manual
3 Contents How to Use This Lab Manual........................................ 5 Lab 1: Setting Up the Student System.................................. 7 Lab 2: Installing Fedora............................................
More informationUpgrade Cisco Interface Module for LoRaWAN IXM using the Console
Upgrade Cisco Interface Module for LoRaWAN IXM using the Console Contents Introduction Prerequisites Requirements Components Used Background Information Configure Step 1. Prepare the firmware images (and
More information1Z0-100 oracle.
1Z0-100 oracle Number: 1Z0-100 Passing Score: 800 Time Limit: 120 min www.examsforall.com Exam A QUESTION 1 Which two aspects can be determined from this output? A. A device is failed and has been removed
More informationWHITE PAPER. Instant openmosix. How to build a working openmosix cluster without touching a compiler
WHITE PAPER How to build a working openmosix cluster without touching a compiler Document Approvals Approved for Publication: Author Name: Ian Latter 5 April 2006 CONTROL PAGE Document Control Document
More informationRecovering GRUB: Dual Boot Problems and Solutions
Recovering GRUB: Dual Boot Problems and Solutions Published by the Open Source Software Lab at Microsoft. October 2007. Special thanks to Chris Travers, Contributing Author to the Open Source Software
More informationThe Linux Handbook. Version 1.6, August 2007
The Linux Handbook Version 1.6, August 2007 Copyright and liability Copyright 2003-2007 Hewlett-Packard Development Company, L.P. HP is a trademark of Hewlett-Packard Development Company, L.P. Linux is
More informationOPERATING SYSTEMS. Božo Krstajić, PhD, University of Montenegro Podgorica.
OPERATING SYSTEMS Božo Krstajić, PhD, University of Montenegro Podgorica bozok@cg.ac.yu 1 The /etc/rc.d directory The system initialization files are stored in the /etc/rc.d directory. Each task or runlevel
More informationLinux Administration
An Introduction to UNIX, Linux, and GNU. Linux Administration UNIT 1 Ch 1 : INTRODUCTION In recent years Linux has become a phenomenon. Various organizations that have adopted it, including some government
More informationInstructions: Step 1: Respond to the following: IT131 Linux+
IT131 Linux+ Course Objectives Upon completion of this course, the student will be able to: 1. Create a new installation of Fedora/RHEL; 2. Use utilities to manage the Fedora/RHEL system; 3. Describe how
More informationLab - Installation of the Linux Operating System
ECE4110 Spring Semester 2012 Lab - Installation of the Linux Operating System Assigned: Jan 12, 2012 Due: Jan 20, 2012 Group Number: Member Names: Lab Goals 1. Install Red Hat Enterprise Linux Work Station
More informationIndex 299. Special Characters * (asterisk) deactivating users, 110 with rpm command, 51
Index 299 Index Note that you can download the PDF file for this book from www.hentzenwerke.com (see the section How to download files at the beginning of this book). The PDF is completely searchable and
More informationServices, logging, accounting Todd Kelley CST8177 Todd Kelley 1
Services, logging, accounting Todd Kelley kelleyt@algonquincollege.com CST8177 Todd Kelley 1 services syslog logger command line utility psacct lastcomm ac, last, lastlog 2 chkconfig vs service (review)
More informationExam Name: Red Hat Certified Engineer on Redhat
Vendor: Red Hat Exam Code: RH302 Exam Name: Red Hat Certified Engineer on Redhat Version: DEMO QUESTION 1 One Logical Volume is created named as myvol under vo volume group and is mounted. The Initial
More informationCourse 55187B Linux System Administration
Course Outline Module 1: System Startup and Shutdown This module explains how to manage startup and shutdown processes in Linux. Understanding the Boot Sequence The Grand Unified Boot Loader GRUB Configuration
More informationThe LILO Configuration Handbook. Virgil J. Nisly
The LILO Configuration Handbook Virgil J. Nisly 2 Contents 1 LILO Configuration 4 2 General Options 4 3 Operating Systems 5 4 Expert 6 3 Abstract LILO Configuration is an application specificly designed
More informationAuthored by: Brian E. Brzezicki Copyright 2013, Paladin Group LLC Reuse without permission is strictly prohibited
Authored by: Brian E. Brzezicki Copyright 2013, Paladin Group LLC Reuse without permission is strictly prohibited Traditionally Unix systems have used the ATT System V initialization mechanism In System
More informationInstallation of Fedora 12 with CD
Prepared by investech.wordpress.com Installation of Fedora 12 with Net Install CD Version 1.0 investech.wordpress.com 07-12-09 This document is produced under Creative Common License (Attribution No Derivatives).
More informationVendor: RedHat. Exam Code: RH133. Exam Name: Red Hat Linux System Administration. Version: Demo
Vendor: RedHat Exam Code: RH133 Exam Name: Red Hat Linux System Administration Version: Demo QUESTION NO: 1 You work as a Network Administrator for Perfect Solutions Inc. The company has a Linux-based
More informationExam : 1Z Title : Enterprise Linux System Administration. Version : DEMO
Exam : 1Z0-403 Title : Enterprise Linux System Administration Version : DEMO 1. You are logged in to server1 and want to allow remote connections to server1 through X Display Manager Control Protocol (XDMCP).
More informationUser. Applications. Operating System. Hardware
2 User Applications Operating System Hardware 3 What is the Booting 1.When the user powers up the computer the CPU (Central Processing Unit) activates the BIOS (Basic Input Output System). 2. The first
More informationChapter 02 Linux Installation and Usage
Chapter 02 Linux Installation and Usage TRUEFALSE 1. A swap partition contains a filesystem. 2. When a user interacts with his computer, he interacts directly with the kernel of the computer's operating
More informationECE 471 Embedded Systems Lecture 16
ECE 471 Embedded Systems Lecture 16 Vince Weaver http://web.eece.maine.edu/~vweaver vincent.weaver@maine.edu 6 October 2017 Midterm will be graded Don t forget HW#5 Announcements MEMSYS wrapup. Academia,
More informationBasic Linux Security. Roman Bohuk University of Virginia
Basic Linux Security Roman Bohuk University of Virginia What is Linux? An open source operating system Project started by Linus Torvalds kernel Kernel: core program that controls everything else (controls
More informationLinux Bible. Negus, C. Table of Contents ISBN-13: Part I: Getting Started 1 Chapter 1: Starting with Linux 3
Linux Bible Negus, C ISBN-13: 9781118218549 Table of Contents Introduction xxxiii Part I: Getting Started 1 Chapter 1: Starting with Linux 3 Understanding What Linux Is 4 Understanding How Linux Differs
More informationCSE 265: System and Network Administration
CSE 265: System and Network Administration Daemons init cron and atd inetd and xinetd Kernel daemons File service daemons Internet daemons Time synchronization daemons Booting and configuration daemons
More informationECE 4110 Internetwork Programming Lab 1: Installation of the Linux Operating System. Lab Goals. Section I: Before we begin
Group Number: ECE 4110 Internetwork Programming Lab 1: Installation of the Linux Operating System Member Names: Date Issued: Tuesday January 10, 2013 Date Due:Thursday January 18, 2013 Last Edited: 1/9/2013
More information1Z Oracle Linux 6 Implementation Essentials Exam Summary Syllabus Questions
1Z0-460 Oracle Linux 6 Implementation Essentials Exam Summary Syllabus Questions Table of Contents Introduction to 1Z0-460 Exam on Oracle Linux 6 Implementation Essentials.. 2 Oracle 1Z0-460 Certification
More information1.3 What does Ctrl-D, Ctrl-A, Ctrl-F and Ctrl-T do in terms of command line editing? (6)
Question 1 2 ICT2631 1.1 How do you switch between virtual consoles? (3) Hold down CTRL and ALT keys and press F1 through F7 to switch between consoles. 1.2 Give three reasons why you may opt to use a
More informationInstalling Red Hat Enterprise Linux AS 4 Update 3 on the IBM System p5 185 or IBM Intellistation POWER 185
Installing Red Hat Enterprise Linux AS 4 Update 3 on the IBM System p5 185 or IBM Intellistation POWER 185 A change in the IBM (R) System p5 (TM) 185 and IBM Intellistation (R) POWER (TM) 185 requires
More informationWomp Howto. William Daniau 1st January 2004
Womp Howto William Daniau 1st January 2004 1 Introduction I ve tried to make Womp as self-exponent as possible, nevertheless a user documentation will be written... one day. Hereafter you ll find some
More informationAutomating Linux App Startup
Automating Linux App Startup David Boyes Session L55 2006 Sine Nomine Associates Agenda Runlevels, init, and symlinks, oh, my! Sequence of events during startup A sample application startup script Separating
More informationThousands of Linux Installations (and only one administrator)
Thousands of Linux Installations (and only one administrator) A Linux cluster client for the University of Manchester A V Le Blanc I T Services University of Manchester LeBlanc@man.ac.uk Overview Environment
More informationCIT 480: Securing Computer Systems
CIT 480: Securing Computer Systems Operating System Security CIT 480: Securing Computer Systems Slide #1 Topics 1. OS Security Features 2. Bypassing OS Security 1. Boot time security 2. BIOS security 3.
More informationManage Directories and Files in Linux. Objectives. Understand the Filesystem Hierarchy Standard (FHS)
Manage Directories and Files in Linux Objectives Understand the Filesystem Hierarchy Standard (FHS) Identify File Types in the Linux System Change Directories and List Directory Contents Create and View
More informationExpressCluster for Linux Ver3.0
ExpressCluster for Linux Ver3.0 Cluster Installation and Configuration Guide (Shared Disk) 2004.06.30 1st Revision Revision History Revision Revision date Descriptions 1 2004/06/30 New manual 2 EXPRESSCLUSTER
More informationInstalling Linux on JMU Computer-Science Department Removable Hard Drives for CS-450 and CS-550
Installing Linux on JMU Computer-Science Department Removable Hard Drives for CS-450 and CS-550 Charles Abzug (1) Be advised that the complete installation of Linux takes at least slightly in excess of
More informationComputer Center, CS, NCTU. Outline. FreeBSD version 8.2-RELEASE. Installing FreeBSD. From CD-ROM
FreeBSD changlp Outline FreeBSD version 8.2-RELEASE Installing FreeBSD From CD-ROM 2 FreeBSD Version FreeBSD Branches/Tags Three parallel development branches: -RELEASE Latest Release Version: 8.2 (Feb,
More informationInitial Bootloader > Flash Drive. Warning. If not used carefully this process can be dangerous
Initial Bootloader > Flash Drive Warning If not used carefully this process can be dangerous Running the script used in this article with an incorrect argument can cause loss of data and potentially damage
More informationSystem control mechanisms
System control mechanisms David Morgan System control - boot and after passing kernel boot parameters sysconfig: boot process control /proc and sysctrl: tuning kernel config others controlling default
More informationsystemd: What to Know and How to Transition
systemd: What to Know and How to Transition Tom Sorensen Solutions Architect, Red Hat 2 Agenda 4 What is systemd? What does systemd offer? How does this affect me? How do I transition to systemd? What
More informationBooting Up & Processes
CS 326: Operating Systems Booting Up & Processes Lecture 3 Today s Schedule Booting the System Process Structure Process Execution The Init System fork() wait() 1/31/18 CS 326: Operating Systems 2 Today
More information