EMC Simple Support Matrix

Transcription

1 EMC Simple Support Matrix EMC Symmetrix DMX-3 and DMX-4 OCTOBER 2014 P/N REV EMC Corporation. All Rights Reserved. EMC believes the information in this publication is accurate as of its publication date. The information is subject to change without notice. THE INFORMATION IN THIS PUBLICATION IS PROVIDED AS IS. EMC CORPORATION MAKES NO REPRESENTATIONS OR WARRANTIES OF AN KIND WITH RESPECT TO THE INFORMATION IN THIS PUBLICATION, AND SPECIFICALL DISCLAIMS IMPLIED WARRANTIES OF MERCHANTABILIT OR FITNESS FOR A PARTICULAR PURPOSE. Use, copying, and distribution of any EMC software described in this publication requires an applicable software license. EMC 2, EMC, and the EMC logo are registered trademarks or trademarks of EMC Corporation in the United State and other countries. All other trademarks used herein are the property of their respective owners. For the most up-to-date regulator document for your product line, go to EMC Online Support ( The information in this ESSM is a configuration summary. For more detailed information, refer to

2 Table 1 EMC E-Lab qualified specific versions or ranges for EMC Symmetrix DMX-3 and DMX-4 EMC Enginuity 5773 (page 1 of 3) Path and Volume Management Cluster Virtual Solutions Provisioning Enabler EMC PowerPath Native Symantec / Veritas / Native Symantec / Oracle SE MPIO/ DMP / VxVM / VxDMP Veritas / RAC LVM SFRAC/VxCFS / Platform Support Target Rev Allowed Target Rev Allowed SF HA j AIX a, f SP1 P01 g AIX a, f MP3 10g - 11g SP1 P01 g ; AIX a, f, k , P , 6.1.0, 5.5 P P06, 5.7 a, f, AIX k 5.3 (AIX) VIOS or later q, f HP-UX, 11iv1 c, f HP-UX, 11iv2 c, f HP-UX, 11iv3 c, f 5.5 or later 5.1 SP2 5.1 SP2-5.2 P04 SP1 P01 g ; P Linux: AX 2.0 GA SP3 c, p Linux: AX 3 c ; 5.7 SP1-5.7 SP1 P01 m 5.3.x g, m Linux: AX 4 c Linux: Citrix XenServer 6.x o 5.6 and 5.7 SP1 m Pvlinks f / d PR , 6.03, 6.1, , 6.0.3, MP3-5.1 PowerHA (HACMP) MP , 6.0.3, 6.0.5, , 6.0.3, 6.0.5, 11g, 11g R2, 3.5 SG g , 6.0.3, SG SG , g R2-11g R1 10g R2-11g R2, 5.0 MP , 6.0.3, 6.1.0, PR , 6.0.3, 6.1.0, 6.0.5, , 6.0.3, x - Linux:OL4U4-4U7 c, p 5.0 MP2-5.0 MP4 Linux: OL 5.0, c 5.3.x g, m 5.0 MP3-5.0 MP4 10g - Linux: OL c 5.5 m, 11g 5.0 MP3-5.1 Linux: OL m, Linux: OL 5.7, m, g 6.0 Linux: OL 5.x UEK R1; R1 U1; R2 U1 r m 5.7 SP1-5.7 SP5 Linux: OL 5.x UEK R1 U2 & U3; R2 U2, U3, & U4 r 5.7 SP1 P01 - Linux: OL 6.x UEK R1; R1 U3; R2 U1, U2, U3, & U4 r 5.7 SP1-5.7 SP5 m Linux: OL 6.x UEK R1 U1 and U2; R2 r Linux: OL 6.x UEK R3 r Linux: OVM 2.2 and later m 5.7 SP3-5.7 SP5 5.3 SP1 HF2 g 10g R2 & - 11g R2 (L, M) s Linux: RHEL 4 U2 - U4 c, h, p ; c, h, p d 4.1, MP4 Linux: RHEL 5.0, 5.1 c, k 4.1 MP2-5.0 MP m, 5.7 SP1 m, Linux: RHEL 5.2 c, k 5.3.x g, m 5.0 MP3-5.1 Linux: RHEL c, k 5.7 SP1 P01 - P02 m, 5.0 MP MP4 - Linux: RHEL c, k Linux: RHEL 5.7, 5.8, 5.9 k 5.6 m, 5.7 SP1 m, 5.7 SP1 P01 - P02 m, Linux: RHEL 5.10, k 5.7 SP1 P01- P02 m, , 6.0.5, 6.1.0, 5.0 MP MP , 6.0.5, 6.1, 10g - 11g 10g - 11g, , 6.0.5, 6.1.0,

3 Table 1 EMC E-Lab qualified specific versions or ranges for EMC Symmetrix DMX-3 and DMX-4 EMC Enginuity 5773 (page 2 of 3) Path and Volume Management Cluster Virtual Solutions Provisioning Enabler EMC PowerPath Native Symantec / Veritas / Native Symantec / Oracle SE MPIO/ DMP / VxVM / VxDMP Veritas / RAC LVM SFRAC/VxCFS / Platform Support Target Rev Allowed Target Rev Allowed SF HA j Linux: RHEL 6.0 c, k 5.6 m, 5.7 SP1 m, 5.7 SP1 P01 - P02 m, PR1 and PR2 Linux: RHEL 6.1, 6.2, k PR , Linux: RHEL 6.3, 6.4, k PR2 & RP3, , Linux: RHEL 6.5, k 6.0.3, 6.0.5, 6.1, PR2 PR , 6.0.5, 6.1, RP3, , 6.0.5, 6.1, 6.0.3, 6.1, 11g R2, Linux: RHEL 7.0 Linux: SLES 9 SP3 - SLES 9 SP4 c 5.5 m 5.3.x g, m 4.1 MP2-5.0 RP1 4.1, g Linux: SLES 10 SP2 - SLES 10 SP3 5.0 MP g R2 - Linux: SLES 10 SP g Linux: SLES 11 Linux: SLES 11 SP1 - SLES 11 SP2 Linux: SLES 11 SP SP1 m, 5.7 SP1 P01 - P02 m, MP MP , g R2-5.7 SP , g R2 Microsoft Windows 2003 (x86 and x64) SP2 and R2 SP2 c MSCS SP2 Microsoft Windows 2008 (x86) SP SP2 and SP SP Microsoft Windows 2008 (x64) SP1 5.3 SP1 g and SP2 k 5.1 SP MPIO / Failover Microsoft Windows 2008 R2 and R2 Cluster SP1 k 5.1 SP2-6.1, , MPxIO / 10g R2-11g 10g R2-11g, Symantec SF PR2 Symantec SF PR , SP1 PR2 & RP3, , , 6.0.5, 6.1, - 6.0, , , SP2 5.1 SP2-6.1, Microsoft Windows Server 2012 k 5.5 SP1-5.7 SP , 6.0.2, 6.1, 6.0.2, 6.1, b, c, h Netware 6.5 SP5 Refer to the Netware Letter of Support at Custom Queries > Extended Support > Specialized Configurations. OpenVMS Alpha v7.3-2, 8.2, 8.3, 8.4 f OpenVMS Integrity v8.2-1, 8.3, 8.3-1H1, 8.4 f Solaris 8 SPARC c, h Refer to the Solaris Letters of Support, located at Custom Queries > Extended Support > Specialized Configurations. Solaris 9 SPARC c SC SP1 10g - 11g Solaris 10 SPARC , P04 g SC g R2 - SP , Solaris 10 x g, _x _x64 5.0_x64-5.1_x , 6.0.3, _x P _x64 Solaris 11 SPARC 6.0 PR , 6.0 PR , 6.0.3, 6.0.5, SC PR , 6.03, 6.0.5, 6.1, 6.0.3, 6.0.5, 6.1.0, 6.1.0, Solaris 11.1 SPARC Solaris 11 x P P P PR1_x , 6.0.3_x , SC 4.1 SC , 6.0.5, 6.1, 6.0 PR , g R2, 6.0.3, PR , 6.0.3_x64 Solaris 11.1 x P P _x64 SC _x64 Solaris 11.2 SPARC Solaris 11.2 x P P , 6.0.5, 6.1.0, 6.0.3_x64, 6.0.5_x64 SC , 6.0.5, 6.1.0, 6.0.3_x64, 6.0.5_x x x 7.3.x - 7.4, 7.5.x x - 7.4, 7.5.x -

4 Table 1 EMC E-Lab qualified specific versions or ranges for EMC Symmetrix DMX-3 and DMX-4 EMC Enginuity 5773 (page 3 of 3) Path and Volume Management Cluster Virtual Solutions Provisioning Enabler EMC PowerPath Native Symantec / Veritas / Oracle SE MPIO/ DMP / VxVM / VxDMP RAC LVM Platform Support Tru64 v5.1b-0 through v5.1b-6 f VMware ESX 3.5 c N/A VMware ESX/ESXi 4.0 (vsphere) c PP/VE SP1 VMware ESX/ESXi 4.1 (vsphere) k PP/VE 5.4 SP2 VxDMP VMware ESXi 5.0 (vsphere) e, k, l PP/VE 5.7 n, N/A NMP ESX 5.7 P02 n, 5.8, 7.2, 7.5.x SP1-5.9 SP1 P02 VxDMP 6.0.1, 6.1 VMware ESXi 5.1 (vsphere) e, k, l PP/VE 5.7 P02 n, 5.8, 5.9, 5.9 SP1-5.9 SP1 P02 VxDMP 6.1 VMware ESXi 5.5 (vsphere) e, k, l PP/VE 5.9, 5.9 SP1-5.9 SP1 P02 Contact your EMC account team for any microcode NDU (non-disruptive upgrade) requirements or prerequisites. Reference EMC Knowledge Base emc Target Rev = EMC recommended versions for new and existing installations. These versions contain the latest features and provide the highest level of reliability. Allowed = Older EMC-approved versions that are still functional, or newer/interim versions not yet targeted by EMC. These versions may not contain the latest fixes and features and may require upgrading to resolve issues or take advantage of newer product features. Versions are suitable for sustaining existing environments but should not be targeted for new installations. See Footnotes and Components, next page. Footnotes for EMC Symmetrix DMX-3 and DMX-4 EMC Enginuity 5773 Legend: a. Minimum ODM definition for AIX 5.2, 5.3, and 6.1. Minimum ODM definition for AIX 7.1. = Qualified; not version-specific b. Virtual Provisioning is supported only if the Virtual Provisioning device is fully provisioned. Blank = Not qualified c. Supports 1 GB HBAs but only with FC_SW connectivity. d. MPIO with AX supported at AX 2.0 SP1 and later. MPIO with RHEL supported at RHEL 4.0 U3 and later. NA = Not applicable e. Supported with DMX-4 only. f. Only server vendor-sourced HBAs are supported. g. These PowerPath versions have reached EOL. For extended support contact PowerPath Engineering or h. Refer to the appropriate Letter of Support on the E-Lab Navigator, Extended Support tab, End-of-Life Configurations heading, for information on endof-life configurations. i. Pvlinks is an HP-UX alternate pathing solution that does not support load balancing. j. Refer to Symantec Release Notes ( for supported VxVM versions, which are dependent on the Veritas Cluster version. k. For EMC XtremCache software operating system interoperability information, refer to the ESM, located at l. Refer to the VMware vsphere 5 ESSM, located at Simple Support Matrix tab, Platform Solutions, for details. m. Version and kernel specific. n. Before upgrading to vsphere 5.1, refer to EMC Knowledgebase articles emc and emc o. All guest operating systems and features that Citrix supports, such as XenMotion, XenHA, and XenDesktop, are supported. p. This operating system is currently EOL. All corresponding configurations are frozen. It may no longer be publicly supported by the operating system vendor and will require an extended support contract from the operating system vendor in order for the configuration listed in the ESSM to be supported by EMC. It is highly recommended the customer upgrade the server to an ESSM-supported configuration or install it as a virtual machine on an EMCapproved virtualization hypervisor. q. Consult the Virtualization Hosting Server (Parent) Solutions table in E-Lab Navigator at for your specific VIOS version prior to implementation. r. For OL with Red Hat stock kernel, refer to the equivalent Red Hat RHEL configuration for supported configurations (for example, OL 5.0 U8 = RHEL 5.8). s. EMC recommends changing Linux MPIO kernel parameter no_path_retry=15 (default is 5). Components for EMC Symmetrix DMX-3 and DMX-4 EMC Enginuity 5773 Host Servers/ Adapters Switches Operating environment Federated Live Migration (FLM) Target Rev Allowed Target Rev Allowed Native Symantec / Veritas / SFRAC/VxCFS / SF HA j All Fibre Channel HBAs from Emulex, QLogic (2 Gb/s or greater), and Brocade (8 Gb/s or greater), including vendor rebranded versions. Solaris requires an RPQ when using any Brocade HBA. All 10 Gb/s Emulex, QLogic, Brocade, Cisco, Broadcom, and Intel CNAs (10GbE NICs that support FCoE). All 1 Gb/s or 10 Gb/s NICs for iscsi connectivity, as supported by Server/OS vendor. Any EMC or vendor-supplied OS-approved driver/firmware/bios is allowed. EMC recommends using latest E-Lab Navigator listed driver/firmware/bios versions. Adapters must support link speed compatible with switch (fabric) or array (direct connect). All host systems are supported where the host and OS vendor allows the host/os/adapter combination. If systems meet the criteria in this ESSM, no further ELN connectivity validation and no RPQ is required. All FC SAN switches (2 Gb/s or greater) from EMC Connectrix, Brocade, Cisco, and QLogic for host and storage connectivity are supported. Refer to the Switched Fabric Topology Parameters table located on the E-Lab Navigator (ELN) at for supported switch fabric interoperability firmware and settings. Enginuity code v : GA release. Virtual Provisioning support. HP-UX, and OpenVMS device identification. Enginuity code v A07: Virtual Provisioning enhancements. Thin device enhancements. Note: Refer to the ELN at for the complete list of available versions. For complete details on FLM support, refer to the EMC Federated Live Migration Simple Support Matrix located at N/A / 7.2.x -

5 Table 2 Category Flag Description 5773 Factory Default Settings EMC Symmetrix DMX-3 and DMX-4 director bits for Fibre Channel switches VPLEX Windows Windows 2003 SP / and later 2012 Linux HP-UX 11i v1 and 11i v2 HP-UX 11i v3 IBM AIX VMware Solaris HP- TRU6 4 HP- Celerra Netware AS400 Fujitsu Fujitsu OpenVMS BS2000/ OSD OSD/ XC FC Loop ID 0 SCSI Soft Reset s SCSI Environment Reports to Host e E E SCSI Return Busy b SCSI Common SN C (opt.) SCSI Disable Queue Reset on Unit Attention d D (opt.) D D D SCSI Enable Sunapee scl SCSI Enable Siemens s SCSI Sequent Host seq SCSI Avoid Reset Broadcast arb ARB SCSI SCSI3 Interface sc3 SC3 SC3 (opt.) (opt.) b (opt.) SC3 SC3 (opt.) (opt.) SC3 SC3 (opt.) SC3 SC3 SCSI SCSI Primary Commands SPC2 (opt.) (opt.) (opt.) (opt.) spc2 SCSI OS2007 os07 a os07 OS07 OS07 (opt.) (opt.) (opt.) (opt.) (opt.) os07 (opt.) (opt.) OS07 OS07 OS07 SCSI Enable Volume Set Addressing v V V V FC Non Participate Hard Addressing np FC Enable point to point mode PP FC Unique Worldwide Name UWN SCSI Initiator Group vcm (opt.) SCSI Open VMS OVM ovms S OVMS FC Enable Auto Negotiation EAN c (opt.) FC FA AS400 as4 AS4 FC Link Speed 2/4 Gb e FICON d Host Vendor (IBM) N/A f FICON d Channel Interface ID 00-FF N/A f FICON d Disable Extended None N/A f FICON d Surpress Simm Port None N/A f FICON d SN Modifier 00 or 02 N/A f FICON d Channel A N/A f Legend: Blank = No change from array factory default setting. Lowercase = Value disabled (off). Uppercase = Value enabled (on). (opt.) = Optional. (Optional settings are tolerated and may be used as required by specialized configuration.) Notes: a. SPC2 must be enabled when OSO7 is enabled. b. The SC3 bit for HP-UX 11i v1 and v2 can be optionally set as indicated only if the SPC2 bit is also set. c. When EAN is enabled (by default), the link speed is negotiated by the target port and switch up to the maximum capable speed. Refer to the appropriate Symmetrix Product Guide for more information. d. Platform support for z/os is 1.11, 1.12, and 1.13; for z/vm, v6.1 and 6.2. z/vm 6.1 and 6.2 are supported with zlinux SuSE SLES [s390-x64-bit] operating systems, fabric attached, Fibre Channel Protocol (FCP), and FC-SW SAN only in a SAN/switch environment. No Navi agent supported running in any zlinux VM. e. The link speed setting is only effective when the EAN flag is disabled. The supported link speeds will be dependent on the I/O module installed. f. FICON is not supported.

6 Table 3 Category Flag Description 5773 Factory Default Settings EMC Symmetrix DMX-3 and DMX-4 director bits for Fibre Channel Direct Connect VPLEX Windows 2003 SP1 and later Windows 2008 / 2012 Linux HP-UX 11i v1 and 11i v2 HP-UX 11i v3 IBM AIX VMware Solaris Celerra Netware AS400 Fujitsu Fujitsu BS2000/ OSD/ OSD XC FC Loop ID SCSI Soft Reset s SCSI Environment Reports to Host e E E SCSI Return Busy b SCSI Common SN (opt. C ) SCSI Disable Queue Reset on Unit Attention d D (opt.) D D D SCSI Enable Sunapee scl SCSI Enable Siemens s SCSI Sequent Host seq SCSI Avoid Reset Broadcast arb ARB SCSI SCSI3 Interface sc3 SC3 SC3 (opt.) (opt.) b (opt.) SC3 SC3 (opt.) SC3 (opt.) SC3 SC3 SCSI SCSI Primary Commands SPC2 (opt.) (opt.) spc2 SCSI OS2007 os07 a os07 OS07 OS07 (opt.) (opt.) (opt.) (opt) (opt.) os07 OS07 OS07 OS07 SCSI Enable Volume Set v V V V Addressing FC Non Participate Hard np NP NP NP NP Addressing FC Enable point to point mode PP pp FC Unique Worldwide Name UWN SCSI Initiator Group vcm (opt.) Host Open VMS ovms FC Enable Auto Negotiation EAN c (opt.) Host FA AS400 as4 AS4 FC Link Speed 2/4 Gb e FICON d Host Vendor (IBM) N/A f FICON d Channel Interface ID 00-FF N/A f FICON d Disable Extended None N/A f FICON d Surpress Simm Port None N/A f FICON d SN Modifier 00 or 02 N/A f FICON d Channel A N/A f Legend: Blank = No change from array factory default setting. Lowercase = Value disabled (off). Uppercase = Value enabled (on). (opt.) = Optional. (Optional settings are tolerated and may be used as required by specialized configuration.) Notes: a. SPC2 must be enabled when OSO7 is enabled. b. The SC3 bit for HP-UX 11i v1 and v2 can be optionally set as indicated only if the SPC2 bit is also set. c. When EAN is enabled (by default), the link speed is negotiated by the target port and HBA up to the maximum capable speed. Refer to the appropriate Symmetrix Product Guide for more information. d. Platform support for z/os is 1.11, 1.12, and 1.13; for z/vm, v6.1 and 6.2. z/vm 6.1 and 6.2 are supported with zlinux SuSE SLES [s390-x64-bit] operating systems, fabric attached, Fibre Channel Protocol (FCP), and FC-SW SAN only in a SAN/switch environment. No Navi agent supported running in any zlinux VM. e. The link speed setting is only effective when the EAN flag is disabled. The supported link speeds will be dependent on the I/O module installed. f. FICON is not supported.

7 Table 4 EMC Symmetrix DMX-3 and DMX-4 director bits for iscsi Category Flag Description 5773 Windows 2003 Windows Linux IBM AIX VMware Solaris Factory Default Settings SP1 and later 2008 / 2012 SCSI Soft Reset s SCSI Environment Reports to e Host SCSI Return Busy b SCSI Common SN C c (opt.) SCSI Disable Queue Reset on Unit Attention d D D(opt.) SCSI Enable Sunapee scl SCSI Enable Siemens s SCSI Sequent Host seq SCSI Avoid Reset Broadcast arb SCSI SCSI3 Interface sc3 SC3 SC3 (opt.) SC3 SC3 (opt.) SCSI SCSI Primary Commands SPC2 (opt.) SCSI OS2007 os07 a OS07 OS07 (opt.) (opt.) (opt.) os07 SCSI Enable Volume Set v Addressing SCSI Initiator Group vcm Host Open VMS ovms SCSI Initiator Session ID isid iscsi IPV4 address iscsi IPV4 Netmask iscsi Link Speed 1Gb (opt.) iscsi Default Gateway (opt.) iscsi isns IP Address iscsi Max Transmission Unit 1500 Legend: Blank = No change from array factory default setting. Lowercase = Value disabled (off). Uppercase = Value enabled (on). (opt.) = Optional. (Optional settings are tolerated and may be used as required by specialized configuration.) Notes: a. SPC2 must be enabled when OSO7 is enabled.

8 Copyright 2015 EMC Corporation. All rights reserved. Published in USA. EMC believes the information in this publication is accurate as of its publication date. The information is subject to change without notice. The information in this publication is provided as is. EMC Corporation makes no representations or warranties of any kind with respect to the information in this publication, and specifically disclaims implied warranties of merchantability or fitness for a particular purpose. Use, copying, and distribution of any EMC software described in this publication requires an applicable software license. EMC², EMC, and the EMC logo are registered trademarks or trademarks of EMC Corporation in the United States and other countries. All other trademarks used herein are the property of their respective owners. For the most up-to-date regulatory document for your product line, go to EMC Online Support (