Windows 10 Meetinghouse Device Setup Procedure

Transcription

1 Windows 10 Meetinghouse Device Setup Procedure This document provides a simple, step-by-step process for setting up a new Windows 10 device. If you need assistance, please contact the Global Service Center at Device Setup Procedure Before powering on the new device If you work in a facility where physical network connections are available, it is highly recommended that you connect now. STEP 1: After the computer is connected to power and any available network, power it on. STEP 2: The first screen you will see is the Region Settings Screen. The default region is set to United States. If this is correct, select Yes. If not, select your region and then Yes.

2 STEP 3: Choose your primary keyboard layout. US is automatically selected. If this is correct, select Yes. If not, choose your layout and proceed. You will then be prompted to add a second keyboard layout. If you need one, click Add layout. If you do not want one, select Skip.

3 STEP 4: You should now be logged in. If you are on a laptop or a desktop with wireless connection, you should be prompted to connect to a wireless network. If a known wireless network is available, connect now. STEP 5: You should now be logged in and prompted to allow your PC to be discoverable. We recommend selecting No. If you select Yes, this will change some of the basic permissions associated with your network settings to allow your device to be visible to other devices on the network.

4 STEP 6: No action or input is required until you see the following prompt. This is the Computer Asset Updater. This tool will allow you to determine how the computer will be provisioned. Please read the descriptions below if you are unsure about which option to select. If at any time you need to change your selection, you may do so by simply reselecting the profile option at the top of the tool. Option 1 Workforce (Domain Joined): This profile should be selected if you work in a Church-owned facility where a Church-managed network is available. You log in to your computer with your LDS Account and your password is automatically synchronized. Option 2 Field (Seminaries, FM Office, Local Workgroup, etc.): This profile should be selected if you work in a location such as a seminary building, institute, facility, or other office where you may have connection to the internet, but you are required to use the VPN to access Church Intranet Services. Option 3 Clerk/Meetinghouse: This profile should be selected by an STS or clerk to be used in a meetinghouse for any reason, including MLS leadership and financial management. Option 4 imtc: This profile should be selected to be used in a Missionary Training Center (other than Provo) for either a teacher, classroom, or computer lab. Option 5 Temple: This profile should be selected for use in temples to configure a device for use as an ordinance scanning station, a recommend desk, or an administrative computer. Option 6 Cancel Provisioning: You should only use this option if you are instructed to do so by a GSC support agent or a TSR. If you are unsure of which option to choose, please contact the GSC at If you cancel provisioning and reboot, the profile selection tool will run again.

5 STEP 7: After you make your selection, you will see the following confirmation box. Click OK. Once again, if at any time you need to change your selection, you may do so by simply reselecting the profile option at the top of the tool. STEP 8: You will now see the following User Account Control (UAC) to allow provisioning to run. Please click Yes.

6 STEP 9: The Computer Asset Updater will allow you to customize the device for your use. Input your information as shown in the example below. Unit Number, Country, Region, and Language are required fields. When you are finished, click Apply. Your computer will perform a few functions and then REBOOT. This will automatically restart your device.

7 STEP 10: The device will automatically log back in and complete the Provisioning process, which can take up to 10 minutes. No action is required during this procedure. You will see screens like this one. After Provisioning is completed, the computer will again restart. You will be presented with the screen to log in.

8 STEP 11: Select the account to match your Unit Number entered on the Asset Updater and click Sign In. You will immediately be asked to change/create your password. Click OK. No previous password exists; you will just be allowed to set your new password. Click on the line labeled New password and type in your new password. Re-type it on the line below and select the arrow. You will then be able to log in.