Access Control Manager TM Release Notes

Transcription

1 Access Control Manager TM Release Notes Version Released Monday, March 4, 2019 Files Released Avigilon Access Control Manager Physical Appliance Files bit OS and Applica on Upgrade Avigilon Access Control Manager Virtual Appliance Files ACM_VM_ ova ACM_VM_ zip Upgrade Path 1. There is no direct upgrade path to ACM from revisions prior to ACM , SR1 or SR2. If not at ACM or one of the service releases, ACM must first be upgraded to SR2 and then to The upgrade package for ACM SR2 is available at p:// p.avigilon.com/acm/5.12.0_sr2/ The release notes for ACM SR2 are available at p:// p.avigilon.com/acm/5.12.0_sr2/acm SR2 Customer Release Notes.pdf 2. There is no direct upgrade path to ACM SR2 from revisions prior to ACM The system must first be upgraded to ACM and then to SR2. The upgrade package for ACM is available at p:// p.avigilon.com/acm/5.10.2/ The release notes for ACM are available at p:// p.avigilon.com/acm/5.10.2/acm Customer Release Notes.pdf 3. There is no direct upgrade path to ACM from revisions prior to ACM The system must first be upgraded to ACM and then to The upgrade package for ACM is available at p:// p.avigilon.com/acm/5.6.0/ The release notes for ACM are available at p:// p.avigilon.com/acm/5.6.0/acm5.6.0 Release Notes v2.pdf 4. There is no direct upgrade path to ACM from revisions prior to ACM The system must first be upgraded to ACM and then to The upgrade package for ACM is available at p:// p.avigilon.com/acm/5.2.0/ The release notes for ACM are available at p:// p.avigilon.com/acm/5.2.0/acm Release Notes.pdf 1/16

2 ACM Upgrade Instructions - ACM includes OS upgrade to 64 bit Perform a full backup (configuration and transactions) of ACM prior to applying this upgrade DO NOT PROCEED WITHOUT AN ACM BACKUP DO NOT POWER CYCLE THE APPLIANCE DURING THE UPGRADE PROCESS (UPS RECOMMENDED) Replica on must be disabled on all appliances prior to upgrade (Previous ACM upgrades required replica on to be ac ve to complete properly, this is not the case for ACM ) Upgrades are supported on ACM Professional (Dell Op Plex XE2) ACM Enterprise (Dell PowerEdge R210, R220, R230 and MBX) and Enterprise PLUS (Dell PowerEdge R330) The appliance will be offline from clients and controllers for the dura on of the process ACM does not support licensing for Dedicated Micros, please contact technical support for new license prior to upgrade This upgrade may take significantly longer to complete than our previous upgrades. The dura on of the upgrade process is directly propor onal to amount of data stored on the appliance Avoid running reports on the appliance for a few hours a er the upgrade. The upgrade process will con nue in the background performing a postgres reindex once the appliance is back online with clients and controllers ACM virtual, please take a snapshot and check the system to ensure storage is not over allocated before proceeding with the upgrade and have a minimum of 500GB disk free space ACM Virtual instances should have VMNic1 and VMNic2 connected in the VMWare host prior to performing ACM upgrade The new ACM upgrade monitor that is running during the upgrade has been set to communicate over port 8888, modifica ons may be required for any external service ports that have been set to use port 8888 on the ACM appliance page un l the upgrade completes NOTE: Please be patient and do not reboot or power off the appliance during the upgrade The upgrade from ACM to ACM includes an upgrade to the opera ng system from 32 bit Linux to 64 bit Linux which requires the databases to be migrated. This upgrade may take between 1 to 12 hours (depending on the size of databases) to complete based on QA tes ng, (see examples below) please plan accordingly For smaller systems the following may be used as es mates based of Avigilon engineering tes ng Readers=20, Iden es=800, Iden ty photo file size=0, Stored transac ons=500,000, Appliance=ACM Professional, Upgrade me=15 minutes, Post upgrade Re-index=1 minute Page 2 of /16

3 Readers=32, Iden es=1000, Iden ty photo file size=2mp, Stored transac ons=1,000,000, Appliance=ACM Professional, Upgrade me=20 minutes, Post upgrade Re-index=2 minutes Readers=200, Iden es=3000, Iden ty photo file size=2mp, Stored transac ons=10,000,000, Appliance=ACM Enterprise, Upgrade me=50 minutes, Post upgrade Re-index=45 minutes Readers=800, Iden es=10,000, Iden ty photo file size=2mp, Stored transac ons=50,000,000, Appliance=ACM Enterprise, Upgrade me=2 hours, Post upgrade Re-index=4 hours Readers=2000, Iden es=30,000, Iden ty photo file size=5mp, Stored transac ons=100,000,000, Appliance=ACM Enterprise PLUS, Upgrade me=2 hours, Post upgrade Re-index=8 hours Upgrades include drive re-par oning, a full OS upgrade from 32bit to 64bit, database migra ons and feature upgrades Upgrade mes provided are intended as guidelines for typical systems. Upgrade me will vary based on system configura ons and data Upgrade mes are based on tests conducted in Avigilon Engineering Labs Post upgrade re-index includes me for data in ACM databases to be fully available for repor ng purposes For ACM systems with large databases, please contact Tech Support to obtain more precise es mates of upgrade mes. As with previous ACM upgrades, doors will con nue to operate as usual during the upgrade and transac ons will cache on controllers and transfer to ACM once the upgrade is complete Iden ty account may require inac vity mer set to indefinite for extended upgrade mes to observe status without requiring to log in and observe logs under appliance Any login with the following rights assigned its delega on can administer and apply so ware upgrades for a physical or virtual appliance: Appliances Lis ng Appliances Edit Appliance So ware Lis ng Appliance So ware Apply Appliance So ware New (for adding upgrades) Appliance So ware Delete (for dele ng upgrades) The upgrade instruc ons can be found in Access Control Manager (ACM) help menu a. A er logging in to Access Control Manager, click on Appliance under Setup and Se ngs b. Go to the So ware Update tab and select Help near the top right of the browser window c. Search for the link labelled upda ng appliance so ware for ACM upgrade instruc ons d. Follow the instruc ons to apply the ACM upgrade Page 3 of /16

4 e. Wait for the system to reboot f. A er reboot, the ACM Upgrade Monitor loads. Note, ACM will reboot a second me during this process g. A er upgrade is complete, click Login on the ACM Upgrade Monitor to open ACM Please contact Tech Support if error occur during upgrade for troubleshoo ng or to restore the system to the previous version Note: The Enable Remote TCP/IP Management option has been disabled by default on all ACM upgrades since ACM Contact Avigilon Support for instructions on how to enable it ACM Virtual Appliance Impor ng the new ACM Virtual Appliance ACM_VM_ ova requires a minimum of VSPhere version 6.5 For exis ng ACM using VMWare, Avigilon engineering recommends se ng the VM to 64bit prior to the ACM upgrade ACM with ACC Integration Upgrade Instructions NOTE: Previous versions to of AvigilonAcmIntegra ons are not compa ble with ACM Avigilon recommends upgrading exis ng ACM/ACC integra ons to current versions of ACM and ACC Instruc ons for installing AvigilonAcmIntegra on a. Download AvigilonAcmIntegra on from h p://avigilon.com/support-and-downloads/for-so ware/acc-integra on-a nd-plug-in-downloads/ b. Make a backup copy of Avigilon\ACM to ACC Integra on\acm to ACC Alarm Gateway\AlarmConfig.xml c. Uninstall previous version of the AvigilonAcmIntegra on d. Reboot the appliance (ACC) that the integra on was installed on e. Install the AvigilonAcmIntegra on f. Ensure Vidproxy service is running g. Login to the upgraded appliance. Navigate to Se ngs/external Systems, select the Avigilon tab; select the appropriate ACC Integra on IP link from the list (may be more than one). Click on the Save bu on to reini alize the handshake between ACM and ACC. Wait un l the Avigilon Server was successfully updated prompt is presented and camera status for each camera shows display of Online. Verify camera streaming Page 4 of /16

5 ACM with replication Upgrade Instructions for Peer-to-Peer (2 or more appliances without Hot Standby) 1. For the ACM upgrade on a replicated system, Avigilon recommends using the Admin account only to perform the upgrade 2. For the ACM upgrade on a peer-to-peer replicated system, disable the replica on on all appliances 3. Apply the so ware upgrade to all appliance in any order 4. Allow the upgrade on all appliances to complete and the appliances to reboot and come back online 5. Accept the EULA for all appliances 6. Re-enable replica on on all appliances ACM with replication Upgrade Instructions for Hot Standby Auto Failover 1. For the ACM upgrade on a replicated system, Avigilon recommends using the Admin account only to perform the upgrade 2. For the ACM upgrade on a hot standby replicated system, manually failover to let the secondary appliance take over the session 3. Disable replica on on both appliances 4. Apply the upgrade to the primary appliance and accept the EULA once it completes 5. On the secondary appliance replica on page, click Fail back and make sure the primary appliance takes over the session 6. Upgrade the secondary appliance and accept the EULA once it completes 7. Re-enable replica on on both appliances ACM with replication Upgrade Instructions for 4 mixed peer to peer and Hot Standby Auto Failover 1. Appliance 1 and 2 are peer to peer; appliances 3 and 4 are failover appliances monitoring 1 and 2 respec vely 2. On appliance 3 and 4, navigate to appliance replica on page, click on take over bu on on appliance 3, 4. Make sure that appliance 3, 4 take over the control from appliance 1, 2 successfully. Observe that panels are online on appliance 3 3. Navigate to appliance replica on tab on each appliance. Uncheck enable replica on and save the configura on on each appliance 4. Upload upgrade file to appliance 1 and 2. Apply the upgrade files on 1 and 2 5. Wait ll lfs to yocto upgrade finishes successfully on appliance 1 and 2. Accept the EULA. 6. Navigate to appliance 3 and 4's appliance replica on tab, click on fail back bu on on appliance 3,4. Make sure appliance 1, 2 take the control back successfully (First try might not succeed, try mul ple mes). Observe that panels are online on appliance 1 Page 5 of /16

6 7. Upload upgrade file to appliance 3 and 4. Apply the upgrade files on 3, 4 8. Wait ll lfs to yocto upgrade finishes successfully on appliance 3 and 4. Accept the EULA. 9. Navigate to appliance replica on page on each appliance, check enable replica on and save the configura on on each appliance NOTE: If you have a scenario where one Hot Standby is monitoring multiple appliances, you should upgrade each monitored appliance one at a time by using the Hot Standby in turns and update the Hot Standby last. HID Firmware Upgrade For systems with HID VertX EVO field hardware, Avigilon recommends upgrade to ACM The HID firmware is part of the ACM upgrade package and will allow you to update the HID VertX EVO field hardware with HID firmware version A er upgrading the ACM to version , upgrade HID VertX EVO V1000 with RCP The HID firmware version will be automa cally updated as a part of the RCP Repeat the upgrade for HID VertX EVO V2000 with RCP and HID firmware version will be updated automa cally Note : ACM is the first version of ACM to support the migration from Access Control Manager Embedded Controller If your HID firmware is not running , please upgrade it ACM with Bosch Intrusion Upgrade As of ACM 5.8.4, a new Applica on Passcode must be configured in addi on to the Automa on Passcode (formerly labelled Password ) to establish the connec on with new AND exis ng intrusion panels The Applica on Passcode can be found (and set) in RPS under "AUTOMATION / REMOTE APP" / "Remote App Passcode" and in ACM under "Se ngs/external Systems/Bosch Intrusion/<panel>/Applica on Passcode" This passcode must be set in both ACM and RPS. If it does not match the panel will fail to connect Notes : - Users upgrading from and must setup the new additional security passcode to get the intrusion panels online again in ACM. - For G-series Bosch panels, a number of issues have been noted. Avigilon recommends upgrading the Bosch firmware to minimum Page 6 of /16

7 ACM with Milestone Integration Installation Instructions 1. All versions below ACM are incompa ble with Milestone Vidproxy _2018R3. 2. Instruc ons for installing Milestone Vidproxy _2018R3 a. Install Microso.NET version if it is not already installed on the computer. b. Download MilestoneVidproxy _2018R3 from n-downloads/ c. Run the installer InstallVidProxyService.msi d. Run the installer InstallVidProxyImageService.msi e. Open up the windows Services page, and verify that both VidProxyImageService and VidProxyService have installed and started f. Ensure the ac ve firewall on the windows server hos ng VidProxy and Milestone is configured to allow incoming and outgoing traffic for VidProxyService on port 8000, and incoming and outgoing traffic for VidProxyImageService on port 9000 g. Go to C://Program Files/Avigilon/VidProxyService/ h. Run VidProxyConfig.exe as Administrator i. Modify the ImagePath, this is where VidProxy will store some temporary files, ensure the path is fully qualified and a valid folder. ii. Modify RCServerIP to the IP of the ACM appliance iii. Ensure the ExternalSystemType is set to "Milestone" iv. Set the RCWebUserName to a valid ACM user v. Set the RCWebPassword to a valid ACM user password vi. Modify the x509cert filename to point to a valid x509 cer ficate file vii. Save Se ngs. viii. Press "Done" or close the window. i. Open the windows Services Page again, and restart VidProxyService and VidProxyImageService 3. Login to ACM with account with required delega ons a. Navigate to Se ngs/external Systems b. Select the Milestone tab c. Select Add Milestone Server d. Set a Name for the server e. Set the Address, this must be the IP of the the Milestone XProtect server f. Set the Port, this must be the XProtect webserver port used to access their web client g. Set the User Name, this must be the username used to login to the XProtect client, this must match the login used for XProtect exactly, including the domain if one is used h. Set the Password, this must be the password for the XProtect client i. Set the VidProxy URL, this must be h p:// :8000/vidproxy, where is the IP of the Vidproxy server Page 7 of /16

8 j. Set the VidProxyImage URL, this must be h p:// :9000/vidproxyimageservice, where is the IP of the Vidproxy server k. Check installed l. Save m. Verify that the flash string indicates that the external system was installed properly n. Verify that the status of the newly created server says "Backend Up" o. Click on the Address of the external system to see the edit page, and verify that cameras are displayed Page 8 of /16

9 New Features Pla orm Enhancements ACM is the first release built on 64-bit linux. As such, the upgrade process will perform addi onal disk re-par oning and database migra ons as outlined in sec ons above Func onal Features Added func onality to create new templates for ease of new hardware configura on o Added templates for readers, inputs and outputs o Added wiring templates for controllers and sub-panels Enhanced subpanel bulk add for new subpanels and doors from templates o Added bulk add wizard to add new panels and subpanels using templates o Added controls to change order of subpanels added o Added interface to name new doors created with a template with propaga ng name to readers, inputs and outputs Added support for the Mercury LP Series controllers o AC-MER-CONT-LP Series 3 One door controller expandable to 17 doors with PoE+ o AC-MER-CONT-LP Series 3 Two door controller expandable up to 64 doors o AC-MER-CONT-LP Series 3 Expandable controller up to 64 doors Added support for the Mercury AC-MER-RIM-MR62E reader module Added func onality to create Schedule Door Mode Overrides from the Doors Lis ng page for doors on Mercury controllers running firmware v or greater o Added bu on to create Overrides on one or more doors in the Doors tab o Added Override window to specify the following for each Override: Override name Door mode Start me End me Notes o Added Override indicator on Doors tab to display ac ve and scheduled (past or future) Overrides o Added Override indicator on Maps to display ac ve and scheduled Overrides o Added bu on to display Override lis ngs page on top right corner o Added Override lis ngs page to display all overrides Added func onality to create backups and download to a local drive via the browser Enhanced search func on on text, integer, date and internal number fields o Added Not Equals, Is Empty, for text and integer fields o Added Not equals, Greater than, and Less than for integer fields o Added Not Equals, Greater than, Equals and Less than for Integer number search o Changed during to equal for date fields Enhanced support for addi onal Card formats o Increased number of supported card formats per panel to 16 o Increased number of supported card formats per appliance to 128 Page 9 of /16

10 Added func onality to monitor real- me hardware status o Replaced Hardware Status Tab with Dashboard tab under Monitor tab o Added tool ps for current Appliance status o Added Dashboard Panels lis ngs page with sortable columns o Added accordion view for subpanels, inputs and outputs under Panels o Added Dashboard Doors lis ngs page with sortable columns Added Upgrade Monitor with visual status of upgrade progress Refreshed the ACM Professional Appliance to the Dell Op Plex XE3 (coming Q2 2019) o Improved processor and RAM o Reduced size o Next genera on pla orm Performance Enhancements Scalability Improvements rela ng to the downloading of Token informa on to panels Improved efficiency of Area based tracking Op miza ons for Enterprise Plus appliance to take advantage of addi onal available memory OpenLDAP configura on database upgrade Scalability improvements when issuing commands to panels Security Enhancements ACM will now accept minimum of TLS v1.2 connec ons, (TLS v1.1 and lower are no longer supported) Upgrades of connected solu ons are required CVE CVE CVE CVE CVE CVE Page 10 of /16

11 Changes Fixed Issues Corrected an issue where paired master doors on HID panels configured with Hard Area APB allowed an iden ty/token into a second area although the iden ty/token did not exit the first area. Corrected an issue where the Alarm report failed to generate when an Operator account men oned in the report is deleted from the system. Corrected an issue where the Monitor search did not return any results when searching for sources with capital Cyrillic le ers. Corrected an issue where searching transac on reports by full name did not return any results. Corrected an issue where the Windows Share Backup failed when the user password contains a dollar symbol. Corrected an issue where the iden ty CSV collabora on failed if SMBv1 was disabled on the host file server. Corrected an issue where iden ty profile update background jobs failed when an iden ty profile contains a forward slash symbol. Corrected an issue where doors did not appear on the door lis ngs page when the panel name included a backslash symbol. Corrected an issue where panels could not be filtered by appliance or group. Corrected an issue where a new door created from a template had blank door processing a ributes if there was only one vendor enabled. Corrected an issue where scheduled iden ty summary CSV reports do not process selected filters. Corrected an issue where Transac on reports were not saved if entries contained quota on marks. Corrected an issue where a field with a single word did not line wrap correctly. Corrected an issue where the group drop down list ignored par oning on the iden ty search page. Corrected an issue where the schedule for a door did not download when the door was switched to a different panel. Corrected an issue where the LDAP collabora on failed to import long user list items. Corrected an issue where corporate card formats were processed incorrectly for HID panels. Corrected an issue where backups could not be created on a hidden shared folder. Corrected an issue where a USB badging camera did not connect when using newer versions of supported browsers. Corrected an issue where a reader could not be added to a door while using the Russian language locale. Corrected an issue where a badge with an empty Name field could be erroneously created. Corrected an issue when using HID hardware that "Occupancy count reached up limit" and "Occupancy count reached max" events are generated mul ple mes. Page 11 of /16

12 Corrected issue where duplicate configura on of external domains were allowed. Corrected issue where integra on to Milestone XProtec failed. Corrected issue when using HID hardware where area count cannot achieve maximum occupancy a er panel reset. Corrected issue with Mercury panels going offline during role informa on update when using Mercury firmware prior to Corrected error when searching for values in iden ty search using empty "Contains" search. Corrected issue with incorrect door status display when issuing door commands from a map UI to wireless locks that do not have extended mode ac vated. Corrected issue preven ng migra ng ACM EC with FW Corrected issue where Grant via Operator Report does not return results. Corrected issue where iden ty search with special characters resulted in inconsistent results. Corrected an issue where hardware status updates are not reflected in the UI. Corrected an issue where the door alarm event count on maps was not coun ng Normal return events. Corrected an issue where the saved string matching search criteria for Access Grant via Operator Report displayed extra characters next to the search string. Corrected an issue where a badge type assigned to one or more users could be erroneously deleted. Corrected an issue where ACC events did not display correctly in global linkages. Corrected an issue where video servers linked to a global linkage could be deleted. Corrected an issue where a CSV iden ty without internal number was erroneously imported. Corrected an issue where door state was reported as closed rather than unknown when the panel was offline. Corrected an issue where trigger variable for macros allowed invalid selec on. Corrected an issue where door and panel statuses from an appliance without a me server were not displayed a er the appliance rebooted. Corrected an issue where the advanced filters on the door lis ng page was inconsistent with the basic filter. Corrected an issue where the door elevator tab data REST calls were missing the XML format tags. Corrected an issue where the Input/Output mask status was not upda ng in real me on the Hardware Status page. Corrected an issue where the Door Number drop down list for a PIM or Gateway displayed an incorrect op on when there are two or more PIMs or Gateways associated with a panel. Corrected an issue with the Token Report displaying only Ac ve Tokens when no token status was specified. Corrected an issue where elements on the Badge designer preview was not deleted dynamically. Page 12 of /16

13 Corrected an issue where the Badge Designer allowed invalid values for badge photo dimensions. Corrected an issue with the instruc ons icon shortcut in Events Monitor not displaying instruc ons every me. Corrected an issue where Door Templates did not deassign par ons to doors. Corrected an issue where a user could view doors from all par ons on the Group page. Corrected an issue where non-applicable Door Processing A ributes were displayed on the Door Edit page for NDE, LE or SimonsVoss doors. Corrected an issue with the Maximum Ac ve Tokens search in Iden ty Search displaying invalid search criteria. Corrected an issue where the Destroy Batch bu on became unavailable a er iden ty dele on and search. Corrected an issue where extra events were generated when changing a door mode from the Door lis ngs page. Corrected an issue where uninstalling an LE or NDE door erroneously generated an "Secure Channel not enabled" event. Corrected an issue where the Door List screen did not display extended door mode for wireless locks. Corrected an issue where double card taps on wireless doors were not displayed correctly on the Events page. Corrected an issue where door names containing special characters were displayed incorrectly. Corrected an issue where the background color of a text field in badge designer was not the same as the badge background color. Corrected an issue where GMT offsets with half hour offsets did not display on the Events monitor. Corrected an issue where the panels could not be filtered by appliance or group on the Panels page. Corrected an issue where manually executed Bosch intrusion global ac ons were not logged in the event monitor. Corrected an issue where the display indicators for a door under manual command or priority did not display properly a er hot standby failover. Corrected an issue where a scheduled job to update SimonsVoss wireless doors failed repeatedly. Corrected an issue where the user issued command indicator on a wireless door was removed in error a er uninstalling a policy on the door. Corrected an issue where when using ACM Verify to access virtual doors with an access group set to use a custom schedule, an invalid card schedule error occurs even though the custom schedule is valid. Corrected an issue where the privacy bu on on AD-400 wireless locks does not lock the door when the lock is connected to a Mercury panel with firmware version , Mercury firmware and later corrects issue. Corrected an issue when reboo ng a panel caused door modes to revert to default configura on during a global ac on. Page 13 of /16

14 Corrected an issue causing door modes to revert to default configura on a er panel reset/download or parameter download during a priority global ac on. Corrected an issue where door modes revert to default configura on when doors are uninstalled during a priority global ac on. ACM Known Issues Issue: ACM may create corrupted roles Descrip on : Some roles may get corrupted and prevent access to the appliance for some users. Affected Version : ACM Workaround: Ensure that the stop date field of the role is not blank Fix: Scheduled to be corrected in a future release Issue: Status Icons not displayed for objects on Map if some objects are missing Descrip on: If some objects on a map are deleted, other maps may not display status icons for valid objects Affected Version: SR1 Workaround: Save the map with missing objects to remove missing objects Fix: Scheduled to be corrected in a future release Issue: Destroy Batch bu on unavailable a er iden ty dele on and search Descrip on: The batch destroy bu on is not available a er dele ng iden es and then running an advanced search on the same iden ty search tab Affected Version: Workaround: Clear search and re-run advanced search with the same criteria Fix: Scheduled to be corrected in a future release Issue: MR62e host name change does not take effect in DHCP Descrip on: When an MR62e is set for DHCP, a host name change does not take effect without a panel reset/download. Affected Version: ACM Mercury MR62e VER Workaround: Reset/download the panel. Fix: Scheduled to be corrected in a future Mercury firmware release Page 14 of /16

15 Firmware Included Controller Firmware: HID VertX V1000/V2000 o rcp-update Mercury Security o EP1501-VER crc o EP1501-VER crc o EP1502-VER crc o EP1502-VER crc o EP2500-VER crc o EP2500-VER crc o LP1501-VER crc o LP1501-VER crc o LP1502-VER crc o LP1502-VER crc o LP2500-VER crc o LP2500-VER crc o M5IC-VER crc o M5IC-VER crc o MSICS-VER crc o MSICS-VER crc o Scp2-AES-VER crc o Scp2-VER crc o ScpC-AES-VER crc o ScpC-VER crc o ScpE-AES-VER crc o ScpE-VER crc Page 15 of /16

16 Sub-Panel Firmware: Mercury Security o M5-16DO-APPL-VER aax o M5-16DOR-APPL-VER aax o M5-20IN-APPL-VER aax o M5-2K-APPL-VER aax o M5-2RP-APPL-VER aax o M5-2SRP-APPL-VER aax o M5-8RP-APPL-VER aax o MI-RS4-APPL-VER aax o MR16IN-SER2-APPL-VER aax o MR16IN-SER3-APPL-VER aax o MR16OUT-SER2-APPL-VER aax o MR16OUT-SER3-APPL-VER aax o MR50-SER2-APPL-VER aax o MR50-SER3-APPL-VER aax o MR51E-SER2-APPL-VER aax o MR51E-SER2-APPL-VER aax o MR52-SER1-APPL-VER-1-11.aax o MR52-SER2-APPL-VER aax o MR52-SER2-APPL-VER aax o MR52-SER3-APPL-VER aax o MR62E-SER3-APPL-VER aax o MRDT-APPL-VER aax o MS-ACS-APPL-VER aax o MS-I8S-APPL-VER aax o MS-R8S-APPL-VER aax Page 16 of /16