Remote Security Camera Monitoring System

Transcription

1 Remote Security Camera Monitoring System Submitted By: Zeeshan Ahmed 1118-FBAS/BSSE/F10 Muhammad Faizan 1379-FBAS/BSSE/F10 Supervised By: MR. Syed Muhammad Saqlain Assistant Professor Department of Computer Science and Software Engineering Faculty of Basic and Applied Sciences International Islamic University, Islamabad (2014)

2 International Islamic University, Islamabad Faculty of Basic and Applied Sciences Department of Computer Science & Software Engineering Final Approval Dated: It is to certify that we have read this project report submitted by Mr. Zeeshan Ahmed registration No FBAS/BSSE/F10 and Mr. Muhammad Faizan registration No FBAS/BSSE/F10. and it is our judgment that this project is to sufficient standard to warrant its acceptance by the International Islamic University, Islamabad for the award of Degree of Bachelor of Science in Software Engineering Committee External Examiner Dr. Syed Hussnain Abbas Naqvi Assistant Professor, DCS & SE, FBAS, International Islamic University, Islamabad Mr. Imran Khan Lecturer, DCS & SE, FBAS, International Islamic University, Islamabad Supervisor Mr. Syed Muhammad Saqlain Assistant Professor, DCS & SE, FBAS, International Islamic University, Islamabad

3

4 In the name of ALLAH (SWT) who is the most beneficent and merciful

5 Dedication To the blessings of Allah (SWT) who is the biggest source of knowledge and the most merciful and his Messenger and the Teacher for the whole mankind our beloved Prophet Muhammad (PBUH). We dedicate this to our beloved Parents & Teachers, without their great support, cordial prayers and immense belief in us, the completion of the degree would have not been possible and this milestone could have been unachievable.

6 Dissertation A dissertation submitted to the Department of Computer Science & Software Engineering International Islamic University, Islamabad As a partial fulfillment of the requirements For the award of the degree of Bachelors in Software Engineering.

7 Student s Declaration We hereby declare that this application is neither, as a whole nor, as a part thereof has been copied out from any source. It is further declared that we have developed this software application and the accompanied report entirely on the basis of our personal effort made under the sincere guidance of our kind supervisor. If any part of this report is proved to be copied out or found to be reported. We shall stand by the consequences. No portion of the work presented in this report has been submitted in the support of any application for any other degree or qualification of this or any other university or institute of learning. Zeeshan Ahmed 1118-FBAS/BSSE/F10 Muhammad Faizan 1379-FBAS/BSSE/F10

8 Acknowledgement All praise to Almighty Allah, Who gave us the understanding, courage and patience to complete this project. Thanks to our parents, seniors, friends and all well-wishers, who helped us during our most difficult times and it is due to their efforts that we are at this position today. We express our gratitude to our kind supervisor Mr. Syed Muhammad Saqlain for providing us opportunity to learn and enhance our knowledge. He had been ready to help and guide us throughout the project.

9 Project in Brief Project Title: Objective: Undertaken By: Remote Security Camera Monitoring System Provide Security Solution for user to watch Live Streaming and Recorded Video Remotely. Zeeshan Ahmed Supervised By: Muhammad Faizan Mr. Syed Muhammad Saqlain Date Started: 1 March, 2014 Date Completed: 25 September, 2014 Tools, Technologies and language Used: Android SDK, JavaCV, OpenCV, Vlcj, JMF, RTSP Protocol,,Netbeans IDE System Used: Core i7 Laptop, Ram 6GB

10 Abstract This Document is for the Project Documentation of our Final Year Project for the Degree of BSSE. In this Document we discuss about Remote Security Camera Monitoring Product with Mobile Application to watch Live Streaming & Recorded Videos remotely. We Describe the Scope of this problem. That user needs protection of his home, office & land. First there is introduction of problem, idea and the motivation that bring us to do this project. Then there is Problem analysis chapter, where we discuss about the problem statement, propose solution, project Scope. Then we discuss about technologies we use for this project. We use Google Android OS Jelly Beans for this project for which we developing an app that deals with the problem above mention. Then we discuss about the project description and modules that will be used in developing of our Application which is complete product suite include Desktop Software plus Mobile Application. Then there is system analysis chapter, where we discuss the Functional requirements of our Application. Then nonfunctional requirements, Design constraints, user characteristics, user environment, Actor goal list and use case diagram. Then there are main use cases of our purposed solution. Then domain model and main sequence diagrams. Then there is Class diagram of our system. Then there is testing chapter, where we discuss the test cases of our system. Then there are conclusion and user manuals.

11 Table of Contents CHAPTER INTRODUCTION PROBLEM STATEMENT EXISTING SYSTEMS DRAWBACKS IN EXISTING SYSTEMS PROPOSED SOLUTION PROJECT SCOPE OBJECTIVE MODULES LIVE STREAMING VIDEO ARCHIVE USER MANAGER MOTION RECORDING SETTINGS MANAGE CAMERA SETTINGS MANAGE VIDEO RECORDING SETTINGS 10 CHAPTER REQUIREMENT ANALYSIS FUNCTIONAL REQUIREMENT NON FUNCTIONAL REQUIREMENT DESIGN CONSTRAINTS USER ENVIRONMENT ACTOR GOAL LIST USE CASE DIAGRAMS USE CASES BRIEF MANAGE CAMERA SETTINGS MANAGE MOTION RECORDING SETTINGS MANAGE VIDEO RECORDING SETTINGS USER MANAGER LOGIN LOGOUT LIVE VIEW LOGIN (MOBILE USER) LOGOUT (MOBILE USER) 18 Remote Security Camera Monitoring System page. 2

12 LIVE VIEW (MOBILE USER) USE CASE FULLY DRESSED USE CASE: LOGIN USE CASE: LOGOUT USE CASE: LIVE VIEW USE CASE: ADD VIDEO RECORDING SETTINGS USE CASE: UPDATE VIDEO RECORDING SETTINGS USE CASE: VIEW VIDEO RECORDING SETTINGS USE CASE: VIEW RECORDED VIDEOS USE CASE: DELETE VIDEO USE CASE: ADD CAMERA SETTINGS USE CASE: UPDATE CAMERA SETTINGS USE CASE: VIEW CAMERA SETTINGS USE CASE: DELETE CAMERA SETTINGS USE CASE: MOTION NOTIFICATION SETTINGS USE CASE: CHANGE PASSWORD USE CASE: ADD ALERT SETTINGS USE CASE: UPDATE ALERT SETTINGS USE CASE: VIEW ALERT SETTINGS USE CASE: ADD AUDIO ALARM SETTINGS USE CASE: UPDATE AUDIO ALARM SETTINGS USE CASE: VIEW AUDIO ALARM SETTINGS USE CASE: LOGIN (MOBILE USER) USE CASE: LOGOUT (MOBILE USER) USE CASE: LIVE VIEW (MOBILE USER) USE CASE: VIDEO ARCHIVE (MOBILE USER) USE CASE: FORGOT PASSWORD (MOBILE USER) DOMAIN MODEL 48 CHAPTER SYSTEM DESIGN CLASS DIAGRAM SEQUENCE DIAGRAMS LOGIN CHANGE PASSWORD LIVE VIEW ALERT AUDIO ALARM ADD CAMERA 55 Remote Security Camera Monitoring System page. 3

13 UPDATE CAMERA DELETE CAMERA VIEW CAMERA ADD VIDEO RECORDING SETTINGS UPDATE VIDEO RECORDING SETTINGS DEPLOYMENT DIAGRAM 58 CHAPTER IMPLEMENTATION SOFTWARE TECHNOLOGIES ANDROID JAVA REAL TIME STREAMING PROTOCOL (RTSP) VISION LIBRARY (OPENCV) VLCJ (OPEN SOURCE) TOOLS NETBEANS IDE ANDROID SDK 61 CHAPTER SYSTEM TESTING 63 CHAPTER CONCLUSION 87 CHAPTER USER MANUAL LOGIN HOME CAMERA CONFIGURATION VIDEO CONFIGURATION LIVE STREAMING VIDEO ARCHIVE SETTING MANAGER 95 Remote Security Camera Monitoring System page. 4

14 7.8 USER MANAGER CAMERA MANAGER ALERT SETTINGS AUDIO ALARM SETTINGS MOBILE LOGIN SCREEN MOBILE FORGOT PASSWORD MOBILE HOME SCREEN LIVE STREAMING MOBILE 103 REFERENCES 105 Remote Security Camera Monitoring System page. 5

15 Chapter 1 Introduction Remote Security Camera Monitoring System page. 6

16 Chapter 1 Introduction 1. Introduction This chapter assembles, evaluate and describe high-level needs and features of the Remote Security Camera Monitoring System. It provides an approach for developing desktop software that communicates with mobile application intended to solve the security problem by utilizing the spatial 1.1 Problem Statement With the growing trend of Surveillance software s used in Home, Office, Play Ground, Watching baby (when he/she sleeps). Though certain tools do Provide very few features but they only come in desktop based applications and are very expensive and not easy to use. Even no product in the market brings all the features under one umbrella. So we come up with solution that will help you to watch your office, home, pets when you are not around. You can watch all these things across different countries. When anything wrong around your property or someone break s into your property desktop software will generate sound alarm and send you alerts with snapshots on your Mobile phone 1.2 Existing Systems Product name Webcam Monitor Y-Cam Home Monitor Our Project Live Streaming (Desktop) Recording Surveillance (Desktop) Video Archive (Desktop) Alerts (Desktop) Audio Alarm (Desktop) Motion/Face Detection (Desktop) Smart Devices Remote Security Camera Monitoring System page. 7

17 Chapter 1 Introduction 1.3 Drawbacks in Existing Systems Different Security Software does not provide all the functionalities. Most of the time companies provide only desktop based software which is limited to your territory and you did not see the live streaming of your property. Other functionalities like motion detection, recorded videos on demand functionality 1.4 Proposed Solution Remote Security Camera Monitoring Software (Complete Surveillance Product Suite) provides all the essential features which include Live Streaming, Video Archive, Face Detection, Motion Detection, Notification, Audio Alarm all the things that are needed for Security of your home,office, land, watch kids, watch pets.when you are not in home it will facilitate you to watch live streaming,previously recorded videos directly on your Mobile Application, so you be aware what happened at specific time. Providing inexpensive solution for Security. Will be one its kind you can watch Live Surveillance Streaming Remotely. Good chances to become leading Surveillance Software in International Market All in One Surveillance Suite (Live Streaming, Recorded Videos,Motion Detection, Alerts, Audio Alarms and Face Detection) 1.5 Project Scope The "Remote Security Camera Monitoring System" is a Desktop/Mobile based application which provides different functionalities like Live Streaming, Video Archive, Motion Detection, Face Detection, Alerts, and Audio Alarms. You can facilitate with different platforms you can use mobile app to watch Live streaming around the world, and also watch recorded videos remotely. Remote Security Camera Monitoring System page. 8

18 Chapter 1 Introduction 1.6 Objective As discussed in previous section the main objectives are to provide complete security software that will help to monitor your home, land, office remotely and receive alerts on the basis of suspicious activity, which is the main objective of this project as well. 1.7 Modules Following are the modules that will be developed in this application Live Streaming In our Mobile App we can watch Live Streaming of connected cameras that are handled by the desktop software. This module is responsible for Live Streaming both on Desktop software and on Mobile Application. With the help of mobile application we can watch live streaming remotely at any place through Wi-Fi Connection Video Archive This module will be responsible for the Playing the Recorded Videos on your Pc as well as on your Android Phone/ Tablet. There is embedded Media Player and list of Recorded videos that you can easily watch on your Pc you can delete recorded videos. These Recorded Videos are also available on Mobile App where you can watch videos with the help of Web Server User Manager This module will be responsible for the changing of current password and create a new one Motion Recording Settings This module will be responsible for alert the Admin about suspicious activity. In this module we send and generate audio Alarm with the help of Face Detection/Motion Detection algorithms. Remote Security Camera Monitoring System page. 9

19 Chapter 1 Introduction Manage Camera Settings This module will be responsible for setting camera details for connecting the camera. We have camera configuration form that requires Camera-Name, Camera Ip-address, and Camera Port-no, Camera Model etc. We can also update specific configurations and view Configuration, delete Configurations Manage Video Recording Settings This module will be responsible for setting camera Video Recording. We can add video recording details that are specific for individual camera. We have video recording settings form that requires Frame Rate, Video Format and Storage Path. We can also update video recording settings and view video recording settings as well. Remote Security Camera Monitoring System page. 10

20 Chapter 2 Requirement Analysis Remote Security Camera Monitoring System page. 11

21 Chapter 2 Requirement Analysis 2. Requirement Analysis This chapter describes the analysis model of the system it explains the problem domain. Requirements of the system use cases and actors. It is the first step of SDLC. Requirements are the things or functions or more accurately services that should be delivered by the system. The proposed system has seven business transactions that are the Functional Requirements of this Desktop /Android Phone Application. These are. 2.1 Functional Requirement Remote Security Camera Monitoring System has the following Functional Requirements these are 1. Login 2. Manage Camera Setting(CRUD) 3. Manage Video Recording Settings(CRUD) 4. Manage Motion Recording Settings. 5. Live Streaming (Desktop/Android Phone) 6. User Manager 7. Video Archive 8. Logout. 9. Forgot Password 2.2 Non Functional requirement The main nonfunctional requirements are given below Usability Application will be designed in such a way that it is very simple, user friendly and the amount of presented information content is limited and well specified Remote Security Camera Monitoring System page. 12

22 Chapter 2 Requirement Analysis Reliability Application record videos in Mb s so it does not impact on its reliability app handle large files easily Performance When we talk about performance Remote Security Camera Monitoring App will provide instant response you can use Wi-Fi, 3G, and 4G in order to access Live Streaming. 2.3 Design constraints Remote Security Camera Monitoring System has following constraints: 1. The application which runs on desktop side recording videos of the connected camera Make a large video files, high resolution images which may require a lot of space on your desktop PC for storage. 2. We use IP -Surveillance Cameras that require constant power and Wi-Fi connection to operate. 3. Application that runs on mobile also requires Wi-Fi connection in order to watch Live Streaming, Recorded Videos. 2.4 User Environment User would be able to access it from anywhere as it is web based. Remote Security Camera Monitoring System page. 13

23 Chapter 2 Requirement Analysis 2.5 Actor Goal List 1. Admin Actor Name GOAL a. Manage Camera Settings. b. Manage Video Recording Settings c. Manage Motion Recording Settings. d. User Manager. e. Camera Manager. f. Live View g. Video Archive 2. Mobile <<Admin>> a. Live View b. Video Archive Table 2.1 Actor Goal List Remote Security Camera Monitoring System page. 14

24 Chapter 2 Requirement Analysis 2.6 Use Case Diagrams Remote Security Camera Monitoring System Login Update Camera Add Camera Manage Camera Settings Admin View Camera Info Delete Camera Alert <CRUD> Audio Alarm <CRUD> Manage Motion Recording Settings Add Video Recording settings Update Video Recording Setting Mobile <<Admin>> Manage Video Recording Settings View video Recording Info Live View Video Archive Delete Video User Manager Motion Notification Settings Change Password Log Out Forgott Password Figure 2.1 Use Case Diagram Remote Security Camera Monitoring System page. 15

25 Chapter 2 Requirement Analysis 2.7 Use Cases Brief Manage Camera Settings Add Camera Settings User selects the setting option of selected camera, Application will show list of options. User select the camera configuration option, new camera setting form will appear, user provide the required details and click on save option.new Camera Setting will be added successfully Update Camera Settings User selects the setting option of selected camera, Application will show list of options. User selects the camera configuration option.application will show the camera settings in an editable form. User select the desired field to make changes and click on save option. Camera Setting will be updated successfully View Camera Settings User selects the setting option of selected camera, Application will show list of options. User selects the camera configuration option. Application will show the camera settings in an editable form. Application will show the camera settings successfully Delete Camera Settings User selects the delete option of selected camera. Application will show the confirmation message. After confirmation application will delete the entire camera settings successfully Manage Motion Recording Settings Alert Settings User selects the Motion Recording option of selected camera. Application will show the list of options.user selects the Notification option. Application will show the notification form. User provides the required details and click on save option. New alert settings will be added successfully. Remote Security Camera Monitoring System page. 16

26 Chapter 2 Requirement Analysis Audio Alarm Settings User selects the Motion Recording option of selected camera. Application will show the list of options.user selects the Audio Alarm option. Application will show the Audio Alarm settings form. User provides the required details and click on save option. New Audio Alarm settings will be added successfully Manage Video Recording Settings Add Video Recording Settings User selects the setting option of selected camera. Application will show the list of options. User selects the Video Recording option. Application will show the video recording form. User provides the required details and click on save option. New video recording settings will be added successfully Update Video Recording Settings User selects the setting option of selected camera.. Application will show the list of options. User selects the Video Recording option. Application will show the video recording form in an editable format.user select the desired field to make changes and click on saves option. Video recording setting will be updated successfully View Video Recording Settings User selects the setting option of selected camera. Application will show the list of options. User selects the Video Recording option. Application will show the video recording details successfully User Manager Motion Notification Settings User selects the User Manger option from the list of options in menu bar. Application displays the motion notification settings form. User provides the required details and click on save option. Motion Notification setting will be added successfully. Remote Security Camera Monitoring System page. 17

27 Chapter 2 Requirement Analysis Change Password User selects the User Manger option from the list of options in menu bar. Application displays the change password form. User provides the required details and click on save option. Password will be updated successfully Login When Login Screen appears user write the and password and click on login option. User will be successfully gain access to dashboard Logout User clicks on logout option. User will be successfully logout from the application dashboard and redirect to log-in screen Live View User selects the Live View option from the list of options in menu bar. Application will display the list of surveillance cameras that are currently connected. User clicks on Update option. All connected surveillance cameras live footage will be updated successfully Login (Mobile User) When Login Screen appears user write the and password and click on login option. User will be successfully gain access to dashboard Logout (Mobile User) User clicks on logout option. User will be successfully logout from the application dashboard and redirect to log-in screen Live View (Mobile User) User selects the Live View option from the list of options in menu bar. Application will display the list of surveillance cameras that are currently connected. User click on desired camera and successfully viewed the live footage. Remote Security Camera Monitoring System page. 18

28 Chapter 2 Requirement Analysis 2.8 Use Case Fully Dressed Use Case: Login Use Case Name Scope Primary Actor Stakeholders and interests Pre-Condition Login Remote Security Camera Monitoring System Admin Admin Interested in to gain access to application dashboard Application should be launched successfully Success Guarantee User will gain access to application successfully Main Scenario 1) Application shows the Login Screen. 2) Login Screen prompts the user to enter and Password. 3) User enters and password. 4) Application verifies and password. 5) Application transfers the control to Dashboard Extensions *a). At any time Application fails. 1. User launches the application again. 4a). User enters wrong and password. 1. Application shows error message and prompt the user to Re-enter and password. 2. Repeat step 3 & 4 for two more times. 4a.1). User enters wrong and password 3 more times. 1. Process terminates. Remote Security Camera Monitoring System page. 19

29 Chapter 2 Requirement Analysis 4b). User does not enter either or password. 1. Application shows error message and prompt the user to reenter and password. 2. Repeat step 3 & 4 for two more times. 4b.1).User enters wrong and password 3 More times. 1. Process terminates. Table 2.8 Use Case Login Use Case: Logout Use Case Name Scope Primary Actor Stakeholders and interests Pre-Condition Logout Remote Security Camera Monitoring System Admin Admin Interested in to logout from the application dashboard. Application should be launched successfully User must be logged in. Success Guarantee User wills successfully logout from the application dashboard. Main Scenario 1). Application shows the dashboard. 2). User clicks on logout option in menu bar. 3). Application successfully logout the user and transfer the control to login screen Table 2.9 Use Case: Logout Remote Security Camera Monitoring System page. 20

30 Chapter 2 Requirement Analysis Use Case: Live View Use Case Name Scope Primary Actor Stakeholders and interests Pre-Condition Live View Remote Security Camera Monitoring System Admin Admin Interested to watch the live streaming of the connected cameras. User must be logged in. Surveillance Cameras must be connected (at least 1). Success Guarantee User will successfully watch the live streaming of the connected cameras. Main Scenario 1).User selects the Live View option from the menu bar. 2). Application displays the still image of the connected cameras. 3). User click on update button to watch live streaming of the Selected camera. 4). Application successfully displays the live streaming of the Selected camera. Extensions *a. At any time Application fails. 1. User launches the application again. 2a). Application shows error message No Camera is connected. 1. Application shows error message and prompt the user to connect at least 1 camera to watch live streaming. Table 2.10 Use Case: Live View Remote Security Camera Monitoring System page. 21

31 Chapter 2 Requirement Analysis Use Case: Add Video Recording Settings Use Case Name Scope Primary Actor Stakeholders and interests Pre-Condition Add Video Recording Settings Remote Security Camera Monitoring System Admin Admin Interested in adding a new video recording setting for a specific surveillance camera. User must be logged in. Success Guarantee Main Scenario Camera must be connected (at least 1). New Video Recording Settings will be added successfully 1).User selects the "Settings option from the dashboard. 2).Application displays the list of possible options. 3).User selects the video recording option. 4).Application displays the video recording settings form. 5).Application prompt the user to select (frame rate, video format, video mode, video storage location) from the list of possible inputs. 6).User clicks on save option after selecting the inputs. 7). Application verifies the inputs. 8). New video recording settings will be added successfully. Extensions *a.).at any time Application fails. 1. User launches the application again. 6a). User selects the cancel option. 1. Go to Step 3. Remote Security Camera Monitoring System page. 22

32 Chapter 2 Requirement Analysis 7a). User did not fill in all the mandatory fields. 1. Application displays the error message and prompts the user to fill in all the required fields. Table 2.11 Use Case: Add Video Recording Settings Use Case: Update Video Recording Settings Use Case Name Scope Primary Actor Stakeholders and interests Pre-Condition Update Video Recording Settings Remote Security Camera Monitoring System Admin Admin wants to update video recording settings of specific camera User must be logged in. Camera must be connected (at least 1). Success Guarantee Video recording settings will be updated successfully. Main Scenario 1). User selects the "Settings option from the dashboard. 2). Application displays the list of possible options. 3). User selects the video recording option. 4). Application displays the video recording settings form. 5). Application displays the (frame rate, video format, Video mode, v ideo storage location) fields in an editable format. 6). User click on save option after selecting the desired inputs. 7). Application verifies the inputs. 8). Video recording settings will be updated successfully. Remote Security Camera Monitoring System page. 23

33 Chapter 2 Requirement Analysis Extensions *a). At any time Application fails 1. User launches the application again. 6a). User selects the cancel option. 1. Go to Step 3. 7a). User did not fill in all the mandatory fields. 1. Application displays the error message and prompts the user to fill in all the required fields. Table 2.12 Use Case Update Video Recording Settings Use Case: View Video Recording Settings Use Case Name Scope Primary Actor Stakeholders and interests Pre-Condition View Video Recording Settings Remote Security Camera Monitoring System Admin Admin wants to view current video recording settings of specific camera. User must be logged in. Camera must be connected (at least 1). Success Guarantee Video recording settings will be viewed successfully Main Scenario 1).User selects the "Settings option from the dashboard 2). Application displays the list of possible options. 3). User selects the video recording option. 4). Application displays the video recording settings form. Remote Security Camera Monitoring System page. 24

34 Chapter 2 Requirement Analysis 5). Application displays the (frame rate, video format, Video mode, video storage location) fields in an editable format. 6). User viewed the current settings successfully. Table 2.13 Use Case View Video Recording Settings Use Case: View Recorded Videos Use Case Name Scope Primary Actor Stakeholders and interests Pre-Condition View Recorded Video Remote Security Camera Monitoring System Admin Admin Interested in viewing recorded videos that are available at that time User must be logged-in. Recorded videos must be available. Success Guarantee User successfully watches the recorded videos. Main Scenario 1). User selects the Video Archive from the menu bar. 2). Application displays the Embedded Media Player and list Of available recorded videos. 3). User selects the video from the list. 4). The recorded video start playing in the embedded media player. 5). User viewed the recorded videos successfully Table 2.14 Use Case: View Recorded Videos Remote Security Camera Monitoring System page. 25

35 Chapter 2 Requirement Analysis Use Case: Delete Video Use Case Name Scope Primary Actor Stakeholders and interests Pre-Condition Delete Video Remote Security Camera Monitoring System Admin Admin wants to delete video from the list. User must be logged in. Recorded videos must be available. Success Guarantee Main Scenario Recorded video will be deleted successfully. 1). User selects the Video Archive from the menu bar. 2).Application displays the Embedded Media Player and list Of available recorded videos. 3).User selects the video from the list. 4). User click on delete Video option 5). Application deletes the selected video successfully. Table 2.15 Use Case: Delete Video Remote Security Camera Monitoring System page. 26

36 Chapter 2 Requirement Analysis Use Case: Add Camera Settings Use Case Name Scope Primary Actor Stakeholders and interests Pre-Condition Add Camera Settings Remote Security Camera Monitoring System Admin Admin Interested in adding new camera configuration for connecting camera Application is in running state. User must be logged in. Camera must be connected (at least 1). Success Guarantee Main Scenario New camera settings will be added successfully 1). User selects the "Settings option from the dashboard 2). Application displays the list of possible options. 3). User selects the camera configuration option. 4). Application displays the camera configuration form. 5). Application prompt the user for (Cam-name, IP-address, Port- no, username password, cam- model, video-channel. 6). User enters the details and click on save option. 7). Application verifies the details. 8). User successfully adds new camera settings. Extensions *a). At any time Application fails. 1. User launches the application again. 6a). User selects the cancel option. 1. Go to Step 3. Remote Security Camera Monitoring System page. 27

37 Chapter 2 Requirement Analysis 7a). IP- address does not have a correct format. 1. Application displays the error message and prompts the user to re-enter the IP- address in a correct format. 7b). User did not fill in all the mandatory fields. 1. Application displays the error message and prompts the user to fill in all the required fields. 7c). User enters invalid port no, password, username. 1. Application displays the error message and prompts the user to enter the valid port no, password, username. Table 2.16 Use Case: Add Camera Settings Use Case: Update Camera Settings Use Case Name Scope Primary Actor Stakeholders and interests Pre-Condition Update Camera Settings Remote Security Camera Monitoring System Admin Admin wants to update the specific camera settings Application is in running state User must be logged in. Camera must be connected (at least 1). Success Guarantee Main Scenario Camera Settings will be updated successfully 1). User selects the "Settings option from the dashboard. 2). Application displays the list of possible options. 3). User selects the camera configuration option. Remote Security Camera Monitoring System page. 28

38 Chapter 2 Requirement Analysis 4). Application displays the camera details (Cam-name, IP-address, Port- no, username password, cam- model, video-channel).in an editable format 5). User enter the desired details and click on save option. 6). Application verifies the details. 7). User successfully updates camera settings. Extensions *a). At any time Application fails. 1. User launches the application again 5a).User selects the cancel option. 1. Go to Step 3. 7a). IP- address does not have a correct format. 1. Application displays the error message and prompts the user to re-enter the IP- address in a correct format. 7b). User did not fill in all the mandatory fields. 1. Application displays the error message and prompts the user to fill in all the required fields 7c. User enters invalid port no, password, username. 1. Application displays the error message and prompts the user to enter the valid port no, password, username Table 2.17 Use Case: Update Camera Settings Remote Security Camera Monitoring System page. 29

39 Chapter 2 Requirement Analysis Use Case: View Camera Settings Use Case Name Scope Primary Actor Stakeholders and interests Pre-Condition View Camera Settings Remote Security Camera Monitoring System Admin Admin wants to view specific camera settings Application is in running state. User must be logged in. Camera must be connected (at least 1). Success Guarantee Main Scenario Camera setting details will be displayed successfully 1). User selects the "Settings option from the dashboard. 2). Application displays the list of possible options. 3). User selects the camera configuration option. 4). Application displays the camera details (Cam-name, IP-address, Port- no, username password, cam- model, video-channel). 5). User successfully viewed the camera details. Extensions *a). At any time Application fails. 1. User launches the application again. 4a).User selects the cancel option. 1. Go to Step 3. Table 2.18 Use Case: View Camera Settings Remote Security Camera Monitoring System page. 30

40 Chapter 2 Requirement Analysis Use Case: Delete Camera Settings Use Case Name Scope Primary Actor Stakeholders and interests Delete Camera Settings Remote Security Camera Monitoring System Admin Admin wants to delete specific camera settings. Pre-Condition Application is in running state. User must be logged in. Camera must be connected (at least 1). Success Guarantee Main Scenario Camera setting details will be deleted successfully. 1). User selects the "Camera Manager option from the menu bar. 2). Application displays the list of possible options. 3). User selects the Delete option. 4). Application prompt for confirmation. 5). User click on yes option. 6). Application deletes the camera successfully with its entire details. Extensions *a). At any time application fails. 1. User launches the application again 4a). User selects the cancel option. 1. Go to Step 3 Table 2.19 Use Case: Delete Camera Settings Remote Security Camera Monitoring System page. 31

41 Chapter 2 Requirement Analysis Use Case: Motion Notification Settings Use Case Name Scope Primary Actor Stakeholders and interests Pre-Condition Success Guarantee Motion Notification Settings Remote Security Camera Monitoring System Admin Admin Interested in setting the motion notification settings. User must be logged-in. User successfully add new motion notification settings Main Scenario 1). User selects the "User Manager option from the menu bar. 2). Application displays the motion notification settings form. 3). Application prompt the user to enter (New- , Confirm New ) the details 4). User provide the details and click on save option 5). Application verifies the details. 6). Application successfully adds the motion notification settings details. Extensions *a). At any time Application fails. 1. User launches the application again 5a). is not in valid format. 1. Application displays the error message and prompts the user to re-enter in a valid format 5b). is not match with confirm-new Application displays the error message and prompts the user to re-enter . Remote Security Camera Monitoring System page. 32

42 Chapter 2 Requirement Analysis 5c). User does not enter either or confirm new Application displays the error message and prompts the user to re-enter and confirm new- . Table 2.20 Use Case: Motion Notification Settings Use Case: Change Password Use Case Name Scope Primary Actor Stakeholders and interests Pre-Condition Success Guarantee Change Password Remote Security Camera Monitoring System Admin Admin want to change his current password with new password User must be logged-in. Password will be changed successfully Main Scenario 1).User selects the "User Manager option from the menu bar. 2). Application displays the Change Password form. 3). Application prompt the user to enter (Current Password, New-Password, Confirm New Password) these details. 4). User provide the details and click on save option 5). Application verifies the details. 6). Application successfully update current password with new one. Extensions *a). At any time Application fails. 1. User launches the application again 5a). Password does not match with confirm-new password. Remote Security Camera Monitoring System page. 33

43 Chapter 2 Requirement Analysis 1. Application displays the error message and prompts the user to re-enter details 5c). User does not enter either current password, new - password or confirm new - password. 1. Application displays the error message and prompts the user to re-enter all details. Table 2.21 Use Case: Change Password Remote Security Camera Monitoring System page. 34

44 Chapter 2 Requirement Analysis Use Case: Add Alert Settings Use Case Name Scope Primary Actor Stakeholders and interests Pre-Condition Add Alert Settings Remote Security Camera Monitoring System Admin Admin Interested in adding new alert settings Application is in running state. User must be logged in. Camera must be connected (at least 1). Success Guarantee Main Scenario New -Alert settings will be added successfully 1). User selects the "Motion Recording option from the dashboard. 2). Application displays the list of possible options. 3). User selects the Notification option. 4). Application displays the Notification form 5). Application prompt the user for (From, To, Subject, Mail-Server, Port-no, photo attachment). 6). User enters the details and click on save option. 7). Application verifies the details. 8). User successfully adds new alert settings. Extensions *a). At any time Application fails. 1. User launches the application again. 6a). User selects the cancel option. 1. Go to Step 3 Remote Security Camera Monitoring System page. 35

45 Chapter 2 Requirement Analysis 7a). - address does not have a correct format. 1. Application displays the error message and prompts the user to re-enter the - address in a correct format. 7b). User did not fill in all the mandatory fields. 1. Application displays the error message and prompts the user to fill in all the required fields. 7c). User enters invalid port no. 1. Application displays the error message and prompts the user to enter the valid port no, password, username. Table 2.22 Use Case: Add Alert Settings Use Case: Update Alert Settings Use Case Name Scope Primary Actor Stakeholders and interests Pre-Condition Update Alert Settings Remote Security Camera Monitoring System Admin Admin wants to update the alert settings Application is in running state. User must be logged in. Camera must be connected (at least 1). Success Guarantee Main Scenario Alert Settings will be updated successfully 1). User selects the "Motion Recording option from the dashboard. 2). Application displays the list of possible options. 3). User selects the Notification option. Remote Security Camera Monitoring System page. 36

46 Chapter 2 Requirement Analysis 4). Application displays the Notification details.(from, To, Subject, Mail-Server, Port-no, photo attachment) in an editable format. 5). User enters the details and click on save option. 6). Application verifies the details. 7). User successfully updates alert settings. Extensions *a). At any time Application fails. 1. User launches the application again. 5a). User selects the cancel option. 1. Go to Step 3 6a). - address does not have a correct format. 1. Application displays the error message and prompts the user to re-enter the - address in a correct format. 6b). User did not fill in all the mandatory fields. 1. Application displays the error message and prompts the user to fill in all the required fields. 6c). User enters invalid port no. 1. Application displays the error message and prompts the user to enter the valid port no, password, username. Table 2.23 Use Case: Update Alert Settings Remote Security Camera Monitoring System page. 37

47 Chapter 2 Requirement Analysis Use Case: View Alert Settings Use Case Name Scope Primary Actor Stakeholders and interests Pre-Condition View Alert Settings Remote Security Camera Monitoring System Admin Admin wants to view Alert settings Application is in running state. User must be logged in. Success Guarantee Main Scenario Camera must be connected (at least 1). Alert details will be displayed successfully 1). User selects the "Motion Recording option from the dashboard. 2). Application displays the list of possible options. 3). User selects the Notification option. 4). Application displays the Notification details.(from, To, Subject, Mail-Server, Port-no, photo attachment) in an editable format. 5). User successfully viewed alert settings. Extensions *a). At any time Application fails. 1. User launches the application again 4a). User selects the cancel option. 1. Go to Step 3. Table 2.24 Use Case: View Alert Settings Remote Security Camera Monitoring System page. 38

48 Chapter 2 Requirement Analysis Use Case: Add Audio Alarm Settings Use Case Name Scope Primary Actor Stakeholders and interests Pre-Condition Add Audio Alarm Settings Remote Security Camera Monitoring System Admin Admin wants to Add Audio Alarm settings Application is in running state. User must be logged in. Camera must be connected (at least 1). Success Guarantee Main Scenario Audio Alarm settings will be added successfully. 1). User selects the "Motion Recording option from the dashboard. 2). Application displays the list of possible options. 3). User selects the Audio Alarm option. 4). Application displays the Audio alarm form. 5). Application prompts the user to enter details of (Audio-Alarm, Duration-Settings, and Volume) from the given Options. 6). User enters details and click on save option. 7). Application verifies the details. 8). User successfully adds audio alarm settings. Extensions *a). At any time Application fails. 1. User launches the application again 6a). User selects the cancel option. Remote Security Camera Monitoring System page. 39

49 Chapter 2 Requirement Analysis 1. Go to Step 3 7a). User does not enter in all fields. 1. Application displays the error and prompts the user to reenter form details. 7b). User does not select audio alarm option. 1. Application displays the error and prompts the user to enter the audio alarm from the available options. Table 2.25 Use Case: Add Audio Alarm Settings Use Case: Update Audio Alarm Settings Use Case Name Scope Primary Actor Stakeholders and interests Pre-Condition Update Audio Alarm Settings Remote Security Camera Monitoring System Admin Admin wants to Update Audio Alarm settings. Application is in running state. User must be logged in. Camera must be connected (at least 1). Success Guarantee Main Scenario Audio Alarm settings will be added successfully 1). User selects the "Motion Recording option from the dashboard. 2). Application displays the list of possible options. 3). User selects the Audio Alarm option. 4). Application displays the Audio alarm details (Audio-Alarm, Duration-Settings, and Volume) in an editable format. Remote Security Camera Monitoring System page. 40

50 Chapter 2 Requirement Analysis 5). User enters details and click on save option. 6). Application verifies the details. 7). User successfully updates audio alarm settings. Extensions *a). At any time Application fails. 1. User launches the application again 5a). User selects the cancel option. 1. Go to Step 3. 6a). User does not enter in all fields. 1. Application displays the error and prompts the user to re-enter form details. 6b). User does not select audio alarm option. 1. Application displays the error and prompts the user to enter the audio alarm from the available options. Table 2.26 Use Case: Update Audio Alarm Settings Use Case: View Audio Alarm Settings Use Case Name Scope Primary Actor Stakeholders and interests Pre-Condition View Audio Alarm Settings Remote Security Camera Monitoring System Admin Admin wants to View Audio Alarm settings. Application is in running state. User must be logged in. Camera must be connected (at least 1). Remote Security Camera Monitoring System page. 41

51 Chapter 2 Requirement Analysis Success Guarantee Main Scenario Audio Alarm settings will be displayed successfully 1). User selects the "Motion Recording option from the dashboard. 2). Application displays the list of possible options. 3). User selects the Audio Alarm option. 4). Application displays the Audio alarm details (Audio-Alarm, Duration-Settings, and Volume) in an editable format 5). User successfully viewed audio alarm settings. Extensions *a). At any time Application fails. 1. User launches the application again 4a). User selects the cancel option. 1. Go to Step 3. Table 2.27 Use Case: View Audio Alarm Settings Use Case: Login (Mobile User) Use Case Name Scope Primary Actor Stakeholders and interests Pre-Condition Success Guarantee Login (Mobile User) Remote Security Camera Monitoring System Admin Admin Interested in to gain access to application dashboard Application should be launched successfully User will gain access to application dashboard successfully Remote Security Camera Monitoring System page. 42

52 Chapter 2 Requirement Analysis Main Scenario 1). Application shows the Login Screen. 2). Login Screen prompts the user to enter and Password. 3). User enters and password. 4). Application verifies and password. Extensions 5). Application successfully transfers the control to Dashboard. *a). At any time Application fails/crashes. 1. User launches the application again 4a). User enters wrong and password. 1. Application shows error message and prompt the user to re-enter and password. 2. Repeat step 3 & 4 for two more times. 4a.1.User enters wrong and password 3 more times. 1. Process terminates. 4b). User does not enter either or password. 1. Application shows error message and prompt the user to re-enter and password. 2. Repeat step 3 & 4 for two more times. 4b.1.User enters wrong and password 3 more times. 1. Process terminates. Table 2.28 Use Case: Login (Mobile User) Remote Security Camera Monitoring System page. 43

53 Chapter 2 Requirement Analysis Use Case: Logout (Mobile User) Use Case Name Scope Primary Actor Stakeholders and interests Pre-Condition Logout(Mobile User) Remote Security Camera Monitoring System Admin Admin Interested in to logout from the application dashboard Application should be launched successfully Success Guarantee Main Scenario User must be logged in User wills successfully logout from the application dashboard 1). Application shows the dashboard. 2). User click on logout option in menu bar. 3). Application successfully logout the user and transfer the Extensions Control to login screen. *a). At any time Application fails. 1. User launches the application again. Table 2.29 Use Case: Logout (Mobile User) Remote Security Camera Monitoring System page. 44

54 Chapter 2 Requirement Analysis Use Case: Live View (Mobile User) Use Case Name Scope Primary Actor Stakeholders and interests Pre-Condition Live View (Mobile User) Remote Security Camera Monitoring System Admin Admin Interested to watch the live streaming of the connected camera s Remotely User must be logged in. Surveillance Cameras must be connected (at least 1). Success Guarantee Main Scenario User will successfully watch the live streaming of the connected cameras remotely. 1). User selects the Live View option from the menu bar. 2). Application successfully displays the live streaming of the Extensions Selected camera. *a). At any time Application fails. 1. User launches the application again Table 2.30 Use Case: Live View (Mobile User) Remote Security Camera Monitoring System page. 45

55 Chapter 2 Requirement Analysis Use Case: Video Archive (Mobile User) Use Case Name Scope Primary Actor Stakeholders and interests Pre-Condition Video Archive (Mobile User) Remote Security Camera Monitoring System Admin Admin Interested in viewing recorded videos that are available at that time remotely User must be logged-in. Recorded videos must be available Success Guarantee User successfully watches the recorded videos Main Scenario 1). User selects the Video Archive from the menu tab. 2). Application displays the list of available recorded videos. 3). User selects the video from the list. 4). The recorded video start playing in the mobile media player or Third party media player (VLC Player). 5). User viewed the recorded videos successfully. Table 2.31 Use Case: Video Archive (Mobile User) Use Case: Forgot Password (Mobile User) Use Case Name Scope Primary Actor Stakeholders and interests Pre-Condition Forgot Password(Mobile User) Remote Security Camera Monitoring System Admin Admin Interested to retrieve forgotten password remotely. Application should be launched successfully Remote Security Camera Monitoring System page. 46

56 Chapter 2 Requirement Analysis User must have an account Success Guarantee Main Scenario User will successfully retrieve the forgotten password 1). User selects the Forgot Password option from the Login Screen. 2). Application displays the form. 3). Application prompts the user to enter details ( Address). 4). User enters the details and click on save option. 5). Application verifies the detail 6). User successfully retrieves the forgotten password. Extensions *a). At any time Application fails/crashes. 1. User launches the application again. 4a). User select cancel option. 1. Go to step 1. 5a). User enters wrong 1. Application shows error message and prompt the user to reenter Repeat step 3 & 4 for two more times. 4a.1.User enters wrong 3 more times. 1. Process terminates. 5b). User does not enter Application shows error message and prompt the user To enter Repeat step 3 & 4 for two more times. Table 2.32 Use Case: Forgot Password (Mobile User) Remote Security Camera Monitoring System page. 47

57 Chapter 2 Requirement Analysis 2.9 Domain Model Figure 2.8 Domain Model Remote Security Camera Monitoring System page. 48

58 Chapter 3 System Design Remote Security Camera Monitoring System page. 49

59 Chapter 3 System Design 3. System Design The system is completely described in the analysis model and the system design is the first step toward the designing of the system. System design provides us with detailed diagrams of the system which is then implemented. System design results in the following diagrams. A list if design goals, describing the qualities of the system that developers should optimize. System design is the transformation of the analysis model into a system design model. In the system design the design goals of the project are defined. The goal of system design is to establish a design approach that provides the functions that are described in the system requirements. There are some diagrams that describe the flow of the system: 1. Class Diagram 2. Sequence Diagram 3. Deployment Diagram Remote Security Camera Monitoring System page. 50

60 Chapter 3 System Design 3.1 Class Diagram Figure 3.1 Class Diagram Remote Security Camera Monitoring System page. 51

61 Chapter 3 System Design 3.2 Sequence Diagrams Sequence diagrams show the flow of the event inside a function call. Remote Security Camera Monitoring System has following sequence diagrams as per scenario Login :Admin :DAO login(string ,string password) opendbconnection() getconnection() connection boolean loginauthentication( ,password) closedbconnection() Figure 3.2: Login sequence diagram Remote Security Camera Monitoring System page. 52

62 Chapter 3 System Design Change Password :Admin :DAO changepassword(string currentpass,string newpass,string confirmnewpass) opendbconnection() getconnection() connection boolean changepassword() closedbconnection() Figure 3.3: Change Password sequence diagram Live View :Admin :CameraConnection :LiveView displayliveview(int camid) initializecamera(int camid) connectcamera() setliveview() boolean Figure 3.4: Live View sequence diagram Remote Security Camera Monitoring System page. 53

63 Chapter 3 System Design Alert :FaceDetector :Camera : Application monitorcamera(int camid) detectionmode() boolean generate (string attachement) send () Figure 3.5: Alert sequence diagram Audio Alarm :FaceDetector :Camera :Alarm monitorcamera(int camid) detectionmode(int camid) boolean createalarm() startalarm() Figure 3.6: Audio Alarm sequence diagram Remote Security Camera Monitoring System page. 54

64 Chapter 3 System Design Add Camera :Camera :DAO addcamera(camera) opendbconnection() getconnection() connection addcamera() closedbconnection() Figure 3.7: Add Camera sequence diagram Update Camera :Camera :DAO updatecamera(camera) opendbconnection() getconnection() connection updatecamera() closedbconnection() Figure 3.8: Update Camera sequence diagram Remote Security Camera Monitoring System page. 55

65 Chapter 3 System Design Delete Camera :Camera :DAO deletecamera(int camid) opendbconnection() getconnection() connection deletecamera() boolean closedbconnection() Figure 3.9: Delete Camera sequence diagram View Camera :Camera :DAO viewcamera(int camid) opendbconnection() getconnection() connection viewcamera() camera closedbconnection() Figure 3.10: View Camera sequence diagram Remote Security Camera Monitoring System page. 56

66 Chapter 3 System Design Add Video Recording Settings :VideoSetting :DAO opendbconnection() getconnection() connection addvideosetting() closedbconnection() Figure 3.11: Add Video Recording Settings sequence diagram Update Video Recording Settings :VideoSetting :DAO updatevideosetting(int camid,videosetting) opendbconnection() getconnection() connection UpdateVideoSetting() closedbconnection() Figure 3.12: Update Video Recording Settings sequence diagram Remote Security Camera Monitoring System page. 57

67 Chapter 3 System Design 3.3 Deployment Diagram Figure 3.13 Deployment Diagram Remote Security Camera Monitoring System page. 58

68 Chapter 4 Implementation Remote Security Camera Monitoring System page. 59

69 Chapter 4 Implementation 4. Implementation Implementation (software) perspective describes software implementations in a particular technology (such as Java). Implementation means programming and building the system, not deploying it. In the implementation phase, the developer builds the components either from scratch or by composition given the architecture document from the design phase and the requirement document from the analysis phase. The architecture document should give guidance. Sometimes, this guidance is found in the requirement document. The implementation phase deals with issues of quality, performance and debugging. The end deliverable of implementation phase is the product itself. 4.1 Software Technologies Android Android is a complete operating environment based upon the Linux V2.6 kernel. Initially, the Deployment target for android was the mobile phone-arena, including smart phones and low cost flip-phone devices. However, Android s full range of computing services and rich functional support has the potential to extend beyond the mobile phone market Java Java is a programming language and computing platform first released by Sun Microsystems in There are lots of applications and websites that will not work unless you have Java installed, and more are created every day. Java is fast, secure, and reliable. From laptops to datacenters, game consoles to scientific supercomputers, cell phones to the Internet, Java is everywhere Real Time Streaming Protocol (RTSP) The Real Time Streaming Protocol (RTSP) is a network control protocol designed for use in entertainment and communications systems to control streaming media servers. The protocol is used for establishing and controlling media sessions between end points. Clients Remote Security Camera Monitoring System page. 60

70 Chapter 4 Implementation of media servers issue VCR-style commands, such as play and pause, to facilitate real-time control of playback of media files from the server Vision Library (OpenCv) OpenCV (Open Source Computer Vision) is a library of programming functions mainly aimed at real-time computer vision, developed by Intel Russia research center in Nizhny Novgorod, and now supported by Willow Garage and Itseez. It is free for use under the open source BSD license. The library is cross-platform. It focuses mainly on real-time image processing. If the library finds Intel's Integrated Performance Primitives on the system, it will use these proprietary optimized routines to accelerate it VLCJ (Open Source) Vlcj is a framework that allows you to embed an instance of a native vlc media player inside your Java application. There are a lot of special requirements that must be met when embedding vlc. Those requirements are, as much as possible, encapsulated by vlcj enabling application developers to use a media player component just as they would use any other Java component. 4.2 Tools Netbeans IDE Netbeans Ide let you quickly develop Java desktop, mobile and web applications Android SDK Google provides Android Software Development Kit to aid developers in producing Android applications. It is consists of APIs (Application Programming Interfaces) that enable easy interaction with device's hardware (buttons, touch screen, compass, GPS etc.) and operating system. It also includes a plug-in for Eclipse IDE that enables easy debugging and simulation of the written applications. At the time of writing the report, the latest version was the Android 1.0 SDK release 2. Remote Security Camera Monitoring System page. 61

71 Chapter 5 System Testing Remote Security Camera Monitoring System page. 62

72 Chapter 5 System Testing 5. System Testing Software testing is the process of evaluation a software item to detect differences between given input and expected output. Also to assess the feature of a software item. Testing assesses the quality of the product. Software testing is a process that should be done during the development process. In other words software testing is a verification and validation process. 5.1 Verification Verification is the process to make sure the product satisfies the conditions imposed at the start of the development phase. In other words, to make sure the product behaves the way we want it to. 5.2 Validation Validation is the process to make sure the product satisfies the specified requirements at the end of the development phase. In other words, to make sure the product is built as per customer requirements. 5.3 Basics of software testing There are two basics of software testing: blackbox testing and whitebox testing Blackbox Testing Black box testing is a testing technique that ignores the internal mechanism of the system and focuses on the output generated against any input and execution of the system. It is also called functional testing Whitebox Testing White box testing is a testing technique that takes into account the internal mechanism of a system. It is also called structural testing and glass box testing. Black box testing is often used for validation and white box testing is often used for verification. Remote Security Camera Monitoring System page. 63

73 Chapter 5 System Testing 5.4 Test Cases Login Description and priority Text Case Name Text Case Priority Pre-Condition Description Login High Desktop Application is installed. In this test case we enter the login detail to successfully logged-in to the Software. Dependency Module Name Post Condition Login User successfully logged in to the system Table 5.1 Login Test Case (1) Stimulus/Response Sequences Step Test Step Test Data Expected Actual Result Result 1 Admin clicks the Application Application is Application Icon Should be open loaded 2 Login Screen Login screen Application appear on the appears on the Login screen is console screen successfully appeared. 3 Admin enter zeeshan@gmail.com Application Application login information z12345 authenticate authenticates and click on login login login Remote Security Camera Monitoring System page. 64

74 Chapter 5 System Testing option. 4 Application successfully authenticate login information and transfer control to Dashboard information successfully Application verifies login details and transfer control to Dashboard information Application verifies login details and transfer control to Dashboard Table 5.1 Login Test Case (2) Logout Description and priority Text Case Name Text Case Priority Pre-Condition Logout High Desktop Application is installed. Admin must be logged-in Description In this test case we logout from the application successfully. Dependency Module Name Post Condition Logout User successfully log out from the application & control redirect to login screen Table 5.2 Logout Test Case (1) Remote Security Camera Monitoring System page. 65

75 Chapter 5 System Testing Stimulus/Response Sequences Step Test Step Test Data Expected Actual Result 1 Admin clicks the Logout Icon Result Admin successfully logout from the application and transfer control to login screen Admin successfully logout from the application and transfer control to login screen Table 5.2 Logout Test Case (2) Add Camera Configuration Description and priority Text Case Name Text Case Priority Pre-Condition Add Camera Configuration High Desktop Application is installed. Admin must be logged-in. Camera must be connected. Description In this test case we add the camera configuration details successfully. Dependency Module Name Post Condition Setting Manager User successfully adds camera configuration settings. Table 5.3 Add Camera Configuration Test Case (1) Remote Security Camera Monitoring System page. 66

76 Chapter 5 System Testing Stimulus/Response Sequences Step Test Step Test Data Expected Result Actual Result 1 Admin clicks Setting Shows Setting the setting available Shows icon on option available Dashboard option 2 Admin selects Application Application camera successfully shows form configuration displays the successfully option camera configuration form 3 Admin enters Cam-01 Application Application camera details validates successfully and select 554 camera adds camera save option zeeshan@gmail.com configuration configuration rtsp:// :554/play1.sdp successfully details. z12345 DCS-2121 Table 5.3 Add Camera Configuration Test Case (2) Remote Security Camera Monitoring System page. 67

77 Chapter 5 System Testing Update Camera Configuration Description and priority Text Case Name Text Case Priority Pre-Condition Update Camera Configuration High Desktop Application is installed. Admin must be logged-in. Camera must be connected and configured. Description In this test case we update the camera configuration details successfully. Dependency Module Name Post Condition Setting Manager User successfully updates camera configuration settings. Table 5.4 Update Camera Configuration Test Case (1) Stimulus/Response Sequences Step Test Step Test Data Expected Result Actual Result 1 Admin clicks the setting icon on Dashboard Setting Shows available option Setting Shows available option 2 Admin selects Application Application Remote Security Camera Monitoring System page. 68

78 Chapter 5 System Testing camera successfully shows configuration displays the configuration option camera details configuration successfully form in editable form 3 Admin enters Cam-01 Application Application camera details validates successfully and select 554 camera updates save option zeeshan@gmail.com configuration camera rtsp:// :554/play1.sdp successfully configuration z12345 details. DCS-2121 Table 5.4 Update Camera Configuration Test Case (2) View Camera Configuration Description and priority Text Case Name Text Case Priority Pre-Condition View Camera Configuration High Desktop Application is installed. Admin must be logged-in. Camera must be connected and configured. Description In this test case we view the camera configuration details successfully. Dependency Module Name Add Camera Configuration Setting Manager Remote Security Camera Monitoring System page. 69

79 Chapter 5 System Testing Post Condition User successfully views camera configuration settings. Table 5.5 View Camera Configuration Test Case (1) Stimulus/Response Sequences Step Test Step Test Data Expected Result Actual Result 1 Admin clicks the setting icon on Dashboard Setting Shows available option Setting Shows available option 2 Admin selects camera configuration option Application successfully displays the camera configuration form in noneditable format Application shows configuration details successfully Table 5.5 View Camera Configuration Test Case (2) Remote Security Camera Monitoring System page. 70

80 Chapter 5 System Testing Delete Camera Configuration Description and priority Text Case Name Text Case Priority Pre-Condition Delete Camera Configuration High Desktop Application is installed. Admin must be logged-in. Camera must be connected and configured. Description In this test case we delete the camera configuration details successfully. Dependency Module Name Post Condition Add Camera Configuration Camera Manager User successfully deletes camera configuration settings. Table 5.6 Delete Camera Configuration Test Case (1) Stimulus/Response Sequences Step Test Step Test Data Expected Result Actual Result 1 Admin selects the camera manager option from menu bar Camera Manager Shows available option Camera Manager Shows available options for Remote Security Camera Monitoring System page. 71

81 Chapter 5 System Testing camera 2 Admin selects delete camera option Application successfully delete the entire camera details successfully Application successfully delete the entire camera details successfully Table 5.6 Delete Camera Configuration Test Case (2) Alert Description and priority Text Case Name Text Case Priority Pre-Condition Alert High Desktop Application is installed. Admin must be logged-in. Camera must be connected and configured. Description Dependency In this test case we send the alert to mobile app on the basis of motion detection. Motion Detection/Face Detection Module Name Motion Recording Post Condition User successfully send alert to mobile app. Table 5.7 Alert Test Case (1) Remote Security Camera Monitoring System page. 72

82 Chapter 5 System Testing Stimulus/Response Sequences Step Test Step Test Data Expected Result Actual Result 1 Admin selects Motion Motion the motion Recording Recording recording successfully Shows list of option from displays list options dashboard of possible option 2 Admin selects Application Application the alert successfully successfully option. show the show the alert alert form form successfully successfully 3 Admin From:zeeshan@gmail.com Admin Admin provides To:faizan@gmail.com successfully successfully details for Subject: snapshots provide provide alert Mail server: details and details and and click on Port no:2125 create create save option Attachment:snapshots.png alert alert notification notification Table 5.7 Alert Test Case (2) Remote Security Camera Monitoring System page. 73

83 Chapter 5 System Testing Alarm Alert Description and priority Text Case Name Alarm Alert Text Case Priority High Pre-Condition Desktop Application is installed. Admin must be logged-in. Camera must be connected and configured. Description Dependency In this test case we set Alarm that generates sound on the basis of motion detection. Motion Detection/Face Detection Module Name Motion Recording Post Condition User successfully set Alarm Alert Table 5.8 Alarm Alert Test Case (1) Stimulus/Response Sequences Step Test Step Test Data Expected Result Actual Result 1 Admin selects the motion recording option from dashboard Motion Recording successfully displays list of possible Motion Recording Shows list of options Remote Security Camera Monitoring System page. 74

84 Chapter 5 System Testing option 2 Admin selects Application Application The Alarm successfully successfully alert option. show the show the Alarm alert Alarm alert form form successfully successfully 3 Admin Select sound:alarm1.mp3 Admin Admin provides Select Duration: 1 minute successfully successfully details for Volume: high provide provide Alarm alert details and details and and click on create create save option alert alert notification notification Table 5.8 Alarm Alert Test Case (2) Add Video Recording Settings Description and priority Text Case Name Text Case Priority Pre-Condition Add video recording settings High Desktop Application is installed. Admin must be logged-in. Camera must be connected and configured. Description In this test case we set video recording settings that apply to specific camera. Remote Security Camera Monitoring System page. 75

85 Chapter 5 System Testing Dependency Module Name Post Condition Add Camera Configuration Setting Manager User successfully add video recording settings Table 5.9 Add Video Recording Settings Test Case (1) Stimulus/Response Sequences Step Test Step Test Data Expected Result Actual Result 1 Admin selects Setting Setting the setting successfully successfully option from shows shows dashboard list of list of possible possible option option 2 Admin selects Application Application The video successfully successfully recording show the show the option from Video Video the dashboard recording recording settings form settings form successfully successfully 3 Admin Frame rate: 15 Admin Admin provides Video format:avi successfully successfully details for Path:C:\\zeeshan\videos\cam1 provide provide video details and details and Remote Security Camera Monitoring System page. 76

86 Chapter 5 System Testing recording settings and click on save option create video configuration for specific camera create video configuration for specific camera Table 5.9 Add Video Recording Settings Test Case (2) Update Video Recording Settings Description and priority Text Case Name Text Case Priority Pre-Condition Description Dependency Module Name Post Condition Update video recording settings High Desktop Application is installed. Admin must be logged-in. Camera must be connected and configured. In this test case we update video recording settings that apply to specific camera. Video recording settings Setting Manager User successfully update video recording settings Table 5.10 Update Video Recording Settings Test Case (1) Remote Security Camera Monitoring System page. 77

87 Chapter 5 System Testing Stimulus/Response Sequences Step Test Step Test Data Expected Result Actual Result 1 Admin selects Setting Setting the setting successfully successfully option from shows shows dashboard list of list of possible possible option option 2 Admin selects Application Application the video successfully successfully recording show the show the option from Video Video the dashboard recording recording details in an details in an editable editable format format 3 Admin Frame rate: 15 Admin Admin provides Video format:avi successfully successfully details for Path:C:\\zeeshan\videos\cam1 provide provide video details and details and recording update video update video settings and configuration configuration click on save for specific for specific option camera camera Table 5.10 Update Video Recording Settings Test Case (2) Remote Security Camera Monitoring System page. 78

88 Chapter 5 System Testing View Video Recording Settings Description and priority Text Case Name Text Case Priority Pre-Condition View video recording settings High Desktop Application is installed. Admin must be logged-in. Camera must be connected and configured. Description In this test case we view the video recording settings that apply to specific camera. Dependency Module Name Post Condition Video recording settings Setting Manager User successfully update video recording settings Table 5.11 View Video Recording Settings Test Case (1) Stimulus/Response Sequences Step Test Step Test Data Expected Result Actual Result 1 Admin selects the setting option from dashboard Setting successfully shows list of possible option Setting successfully shows list of possible option 2 Admin selects The video Application successfully Application successfully Remote Security Camera Monitoring System page. 79

89 Chapter 5 System Testing recording option from the dashboard show the Video recording details in an editable format show the Video recording details in an editable format Table 5.11 View Video Recording Settings Test Case (2) Live View Description and priority Text Case Name Text Case Priority Pre-Condition Description Live View High Desktop Application is installed. Admin must be logged-in. Camera must be connected and configured. In this test case we view the Live Streaming of the connected cameras Dependency Module Name Post Condition Live View User successfully updates Live Streaming successfully. Table 5.12 Live View Test Case (1) Remote Security Camera Monitoring System page. 80

90 Chapter 5 System Testing Stimulus/Response Sequences Step Test Step Test Data Expected Result Actual Result 1 Admin selects the Live View option from dashboard Application successfully shows list of possible option Application successfully shows list of possible option 2 Admin selects the update option available in live view display screen Application successfully shows the live streaming of connected cameras Application successfully shows the live streaming of connected cameras Table 5.12 Live View Test Case (2) Video Archive Description and priority Text Case Name Text Case Priority Pre-Condition Video Archive High Desktop Application is installed. Admin must be logged-in. Camera must be connected and configured. Description In this test case we watch the recorded videos of the Remote Security Camera Monitoring System page. 81

91 Chapter 5 System Testing connected cameras successfully. Dependency Module Name Post Condition Video Archive User successfully watched recorded videos. Table 5.13 Video Archive Test Case (1) Stimulus/Response Sequences Step Test Step Test Data Expected Result Actual Result 1 Admin selects the Video Archive option from dashboard Application successfully shows list of recorded videos with embedded media player Application successfully shows list of recorded videos with embedded media player 2 Admin selects the video from the list of available videos Application successfully shows the recorded video in media player Application successfully shows Recorded videos. Table 5.13 Video Archive Test Case (2) Remote Security Camera Monitoring System page. 82

92 Chapter 5 System Testing Delete Video Description and priority Text Case Name Text Case Priority Pre-Condition Delete Video High Desktop Application is installed. Admin must be logged-in. Camera must be connected and configured. Description In this test case we delete the recorded videos successfully. Dependency Module Name Post Condition Video Archive User successfully deletes recorded videos. Table 5.14 Delete Video Test Case (1) Stimulus/Response Sequences Step Test Step Test Data Expected Result Actual Result 1 Admin selects the Video Archive option from dashboard Application successfully shows list of recorded videos with embedded media player Application successfully shows list of recorded videos with embedded media player 2 Admin selects the video from the list of available videos Application successfully delete the selected recorded video and Application successfully delete Recorded videos. Remote Security Camera Monitoring System page. 83

93 Chapter 5 System Testing and click on delete video option update the list of videos Table 5.14 Delete Video Test Case (2) Change Password Description and priority Text Case Name Text Case Priority Pre-Condition Description Change Password High Desktop Application is installed. Admin must be logged-in. In this test case we change the current password with new password successfully. Dependency Module Name Post Condition User Manager User successfully change current password. Table 5.15 Change Password Test Case (1) Remote Security Camera Monitoring System page. 84

94 Chapter 5 System Testing Stimulus/Response Sequences Step Test Step Test Data Expected Result Actual Result 1 Admin selects the Application Application User Manager successfully shows successfully shows option from the change password Change password dashboard form. form 2 Application prompt z12345 Application Application the Admin to enter successfully change successfully details and click on the current password change the current save option with new one password with new one Remote Security Camera Monitoring System page. 85

95 Chapter 6 Conclusion Remote Security Camera Monitoring System page. 86

96 Chapter 6 Conclusion 6. Conclusion This Remote Security Camera Monitoring is a complete Security Suite which provides you the most efficient security solution. This monitoring software suite provides you Desktop Software and Mobile Application. In which you watch Live Streaming, Recorded Videos, Manages User Setting, Manage Video Recording Settings, Manage Camera Configuration, Manages Alerts, and Alarm Notification. On the other hand where you have Mobile Application that communicates with desktop software. You can easily watch Live Streaming Remotely. Recorded Videos uploaded on web server and mobile application fetches those videos and provides you remotely. You can receive Alerts on the basis of suspicious activity like Face Detection, Motion Detection Following are the major Features of Remote Security Camera Monitoring System : Watch Live Streaming on your PC Watch Live Streaming on your Android Mobile Phone/ Android Tablets. Motion Detection, Face Detection manages on PC. Manages Account Settings Watch Recorded Videos on PC. Watch Recorded Videos on your Android Mobile Phone/ Android Tablets. Send Alerts to mobile phone/tablets when Motion is detected. Remote Security Camera Monitoring System page. 87

97 Chapter 7 User Manual Remote Security Camera Monitoring System page. 88

98 Chapter 7 User Manual 7. User Manual 7.1 Login Log in your desktop application by providing username and password and attend and start Remote Security Camera Monitoring System to watch Live Streaming, Motion Detection, and Recorded Videos Figure 7.1: Login Screen Remote Security Camera Monitoring System page. 89

99 Chapter 7 User Manual 7.2 Home After Successful Login you controls redirect to Home Pages. Where you can add cameras, remove cameras. Configure camera settings, Video-recording, -Alert settings, Audio Alarm Settings, Account settings, Motion Recording and much more. Figure 7.2: Home Screen Remote Security Camera Monitoring System page. 90

100 Chapter 7 User Manual 7.3 Camera Configuration After connecting cameras you have to manually configure camera setting to use surveillance camera in real life. You have to provide all details as mentioned in screenshot. After successful completion of configuration you can easily watch live streaming it may be your roof, outdoor, indoor. Figure 7.3: Camera Configuration Screen Remote Security Camera Monitoring System page. 91

101 Chapter 7 User Manual 7.4 Video Configuration You can easily view live streaming of your surveillance camera on your desired video settings. Each camera have different video configuration so you can easily manage video settings of each camera. Figure 7.4: Video Configuration Screen Remote Security Camera Monitoring System page. 92

102 Chapter 7 User Manual 7.5 Live Streaming After configuring the cameras you can easily watch live streaming on your screen. It doesn t matter how many cameras are connected you can easily watch live streaming of the cameras.by simply select Live Streaming option in menu bar. It will show you the streaming of your desired camera Figure 7.5: Live Streaming Screen Remote Security Camera Monitoring System page. 93

103 Chapter 7 User Manual 7.6 Video Archive After configuring the cameras you can easily watch live streaming on your screen. It also recording the entire streaming on your system. Where you can watch streaming of specific time, specific month, and specific year. You can simply select option Video Archive from the menu bar. There is a embedded media player and list of available videos you can easily watch your desired video by simple click on the video. Figure 7.6: Video Archive Screen Remote Security Camera Monitoring System page. 94

104 Chapter 7 User Manual 7.7 Setting Manager You can simply click setting on home screen where you can see list of possible options.setting Manager have a list of possible option where you can easily manager camera settings, video settings, Alarm Settings, settings. Figure 7.7: Setting Manager Screen Remote Security Camera Monitoring System page. 95

105 Chapter 7 User Manual 7.8 User Manager You have to select option User Manager in menu bar. User Manager has a list of possible option where you can easily manage Change passwords settings, Motion Notification Settings. It will show you the details of password setting and motion notification settings. Figure 7.8: User Manager Screen Remote Security Camera Monitoring System page. 96

106 Chapter 7 User Manual 7.9 Camera Manager Camera Manager shows the list of connected cameras with details. Where you can easily watch the date when cameras have been installed on the system. You can also remove cameras using this interface. Figure 7.9: Camera Manager Screen Remote Security Camera Monitoring System page. 97

107 Chapter 7 User Manual Alert Settings When you select settings from home screen it will show you list of possible options in which setting is one of them. Alert Setting allows you to send snapshots to mobile phone when motion is detected. It will help us to inform the situation where cameras have been connected. Setting alerts you can easily know what s going around your property. Figure 7.10: Alert Setting Screen Remote Security Camera Monitoring System page. 98

108 Chapter 7 User Manual 7.11 Audio Alarm Settings When you select settings from home screen it will show you list of possible options in which Audio Alarm setting is one of them. Audio Alarm Setting allows you to set the Alarm sound, volume so it will generate sound using these setting when motion is detected around your property. Figure 7.11: Audio Alarm Screen Remote Security Camera Monitoring System page. 99

109 Chapter 7 User Manual 7.12 Mobile Login Screen When you launches app on you android phone it will show you the login screen where you insert the same credential as on your desktop application ( , password).after verification it will allow to access the mobile app dashboard where you watch live streaming. Figure 7.12: Mobile Login Screen Remote Security Camera Monitoring System page. 100

110 Chapter 7 User Manual 7.13 Mobile Forgot Password When you launches app on you android phone it will show you the login screen where you insert the same credential as on your desktop application( , password).if you forgot your password you have to select forgot password option. It will show you the form where you provide details and retrieve the password. Figure 7.13: Mobile Forgot Password Screen Remote Security Camera Monitoring System page. 101

111 Chapter 7 User Manual 7.14 Mobile Home Screen When you launches app on you android phone it will show you the login screen where you insert the same credential as on your desktop application( , password).after successful login it redirect your control to dashboard where you have different options you can easily watch live streaming remotely, watch recorded videos. It is not possible before but now you can easily watch live streaming across the countries. Figure 7.14: Mobile Home Screen Remote Security Camera Monitoring System page. 102

112 Chapter 7 User Manual 7.15 Live Streaming Mobile When you launches app on you android phone it will show you the login screen where you insert the same credential as on your desktop application( , password).after successful login it redirect your control to dashboard where you have different options you can easily watch live streaming remotely. Figure 7.15: Live Streaming Mobile Screen Remote Security Camera Monitoring System page. 103