ID CPR40.xx-xx. History of Firmware Revisions. Desktop Reader: ID CPR40.30-USB ID CPR40.30-SUSB ID CPR40.30-A. Reader Module:

Transcription

1 RELEASE-NOTE ID CPR40.xx-xx History of Firmware Revisions Desktop Reader: Reader Module: final public SWRN CPR40xx.doc

2 Copyright 2012 by FEIG ELECTRONIC GmbH Lange Strasse 4 D Weilburg-Waldhausen Tel.: Note With the edition of this document, all previous editions become void. Indications made in this manual may be changed without previous notice. Copying of this document, and giving it to others and the use or communication of the contents thereof are forbidden without express authority. Offenders are liable to the payment of damages. All rights are reserved in the event of the grant of a patent or the registration of a utility model or design. Composition of the information in this document has been done to the best of our knowledge. FEIG ELECTRONIC GmbH does not guarantee the correctness and completeness of the details given in this manual and may not be held liable for damages ensuing from incorrect or incomplete information. Since, despite all our efforts, errors may not be completely avoided, we are always grateful for your useful tips. The instructions given in this manual are based on advantageous boundary conditions. FEIG ELECTRONIC GmbH does not give any guarantee promise for perfect function in cross environments. FEIG ELECTRONIC GmbH assumes no responsibility for the use of any information contained in this document and makes no representation that they free of patent infringement. FEIG ELECTRONIC GmbH does not convey any license under its patent rights nor the rights of others. OBID and OBID i-scan is a registered trademark of FEIG ELECTRONIC GmbH. All cited brand names, product names, or trademarks belong to their respective holders. General information's regarding this document The following figure formats are used: 0...9: for decimal figures 0x00...0xFF: for hexadecimal figures, b0...1 for binary figures. The hexadecimal value in brackets "[ ]" marks a command. FEIG ELECTRONIC GmbH Page 2 of 17 SWRN CPR40xx.doc

3 General This document describes the history of firmware changes of the OBID classic-pro Reader types ID CPR40.xx-xx. Manual No. "H71100-#e-ID" described the functionality of this Reader types. FEIG ELECTRONIC GmbH Page 3 of 17 SWRN CPR40xx.doc

4 History of Firmware Revisions V (March 2008) appropriated manual H e-ID General First released Version CPR40.xx_-_010100_EFIKL.mhx ID CPR40.00-UCD ID CPR40.01-UCD ID CPR40.30-U CPR40.xx_SAM_010100_EFIKL.mhx ID CPR40.30-US FEIG ELECTRONIC GmbH Page 4 of 17 SWRN CPR40xx.doc

5 V (May 2008) appropriated manual H e-ID USB Interface Internal handling modified [0xBE] ISO T=CL: internal buffer handling modified CPR40.xx_-_010300_EFIKL.mhx ID CPR40.00-UCD ID CPR40.01-UCD ID CPR40.30-U CPR40.xx_SAM_010300_EFIKL.mhx ID CPR40.30-US FEIG ELECTRONIC GmbH Page 5 of 17 SWRN CPR40xx.doc

6 V (July 2008) : appropriated manual H e-ID - no firmware version available - CPR40.xx_SAM_010380_EFIKL.mhx ID CPR40.30-US [0xC0][0x01] SAM Activate / Deactivate: SAM baud rate setting modified FEIG ELECTRONIC GmbH Page 6 of 17 SWRN CPR40xx.doc

7 V (August 2008) appropriated manual H e-ID [0xA2] Write Mifare Reader Keys: handling of KEY-ADR corrected CPR40.xx_-_010400_EFIKL.mhx ID CPR40.00-UCD ID CPR40.01-UCD ID CPR40.30-U CPR40.xx_SAM_010400_EFIKL.mhx ID CPR40.30-US [0xC0] [0x01] SAM Activate / Deactivate: Adding of optional parameter EXT_TA1 Status New status byte 0x37: Unsupported SAM Baudrate FEIG ELECTRONIC GmbH Page 7 of 17 SWRN CPR40xx.doc

8 V (December 2008) USB RS232 interface Parameter appropriated manual H e-ID Delayed reset signalling (1.5 sec) to enable reset detection for several slow host systems and Windows2000 systems. Corrected handling for receive protocols with more than 255 byte. [0x25[ Select - ATQA for Transponder with bit rates higher 106 kbit/s corrected. [0x66] Get Reader Info - Swapping of Bit MODEL and ANT as described in the manual Corrected handling of receive protocols with more than 255 byte. CFG3: - ISO14443_FTUR.UID_ORDER new parameter to swap the UID byte order of ISO14443 A transponder CPR40.xx_-_010500_EFIKL.mhx Scan-Mode USB Placement of separator character between UID and data corrected CPR40.xx_SAM_010500_EFIKL.mhx [0xC0][0x01] SAM Activate / Deactivate: New option GetATR New option GetATR Smart Card Interface Several internal improvements. FEIG ELECTRONIC GmbH Page 8 of 17 SWRN CPR40xx.doc

9 V (May 2009) appropriated manual H e-ID [0xA3] Write DES/AES Reader Keys - added [0xA2] Write mifare Keys - maximum number of keys reduced to 8 [0xB2] Authent Mifare Ultralight C - added Transponder Driver Parameter Full support of NXP mifare Ultralight C (MF0ICU2): added Support of NXP mifare plus, Level 1 basic functions: added CFG6: - New parameter CFG6.SCAN-DATA2.INDPD CPR40.xx_-_010700_EFIKL.mhx CPR40.xx_SAM_010700_EFIKL.mhx FEIG ELECTRONIC GmbH Page 9 of 17 SWRN CPR40xx.doc

10 V (December 2009) appropriated manual H e-ID [0xA3] Write DES/AES Reader Keys: added [0xB0][0x01] Inventory: content of PROTO-INFO for ISO14443B chips corrected [0xB0][0x25] Select: new option DRV_SEL for dedicated Transponder driver selection. [0xBD] ISO14443A Transparent Command: new mode [0xBE] ISO14443B Transparent Command: new mode 1 Transponder Driver ISO14443A / B improved EMD handling ISO14443A anticollision for 7 byte UIDs revised Parameter - CPR40.xx_-_010900_EFIKL.mhx CPR40.xx_SAM_010900_EFIKL.mhx FEIG ELECTRONIC GmbH Page 10 of 17 SWRN CPR40xx.doc

11 V (February 2010) appropriated manual H e-ID [0xBE] ISO T=CL, PING works independent from parameter CFG3.ISO14443 FTUR.ERROR_RETRY. [0xBD] ISO14443A Transparent Command: bug-fix Transponder Driver Scan-Mode Full support of Infineon my-d move (SLE 66R01P) added ISO14443 A driver Request Guard Time modified (relevant for mifare plus in SL1 and SL2) Separator will be only inserted if UID is transferred CPR40.xx-U_-_011000_EFIKL.obid.fw.xml For readers connected via USB Interface CPR40.xx_SAM_011000_EFIKL.obid.fw.xml For readers connected via asynchronous Interface CPR40.xx_SAM_011000_EFIKL.mhx Smart Card Interface Chipcards without TD(1) are supported with T=0 Protocol Supported baudrate FI=2, DI=8 added Supported baudrate FI=#, DI=7 added FEIG ELECTRONIC GmbH Page 11 of 17 SWRN CPR40xx.doc

12 V (March 2010) Configuration appropriated manual H e-ID [0xA0] Reader Login added. CFG14 (Customer Parameters) and CFG15 (Password) added For readers connected via USB Interface: CPR40.xx-U_-_011100_EFIKL_USB.obid.fw.xml For readers connected via asynchronous Interface CPR40.xx_SAM_011100_EFIKL_serial.obid.fw.xml CPR40.xx_SAM_011100_EFIKL.mhx FEIG ELECTRONIC GmbH Page 12 of 17 SWRN CPR40xx.doc

13 V (June 2010) appropriated manual H e-ID Transponder Driver ST Transponder: SRixxx and SR revised NXP Mifare Classic: Performance enhancement For readers connected via USB Interface: CPR40.xx-U_-_011200_EFIKL.obid.fw.xml For readers connected via asynchronous Interface CPR40.xx_-_011200_EFIKL.obid.fw.xml CPR40.xx-U_SAM_011200_EFIKL.obid.fw.xml FEIG ELECTRONIC GmbH Page 13 of 17 SWRN CPR40xx.doc

14 V (March 2011) appropriated manual H e-ID General USB improvements I/O control access changed ISO14443-B improvements New command [0x72] SetOutput added [0x66] Get Reader Info Mode 0xFF (Complete Info) added [0xBD] ISO14443A Transparent Command: bug-fix [0xBE] ISO14443B Transparent Command: bug-fix [0xB2] [0xBF] ISO Container Command: bug-fix Configuration CFG1, PSST new default value = 0x00 CFG1, TR-RESPONSE-TIME new default value = 0x14 CFG2, additional parameters for I/O control added CFG8 (ISO14443-A Transponder Settings) and CFG9 (ISO14443-B Transponder Settings) added. (see Application Note N e-ID-C.doc -> available only on special request) General SoftCrypto Function for mifare DESFire, mifare PLUS and mifare Ultralight C added to standard firmware. Separate earlier firmware versions for mifare DESFire and mifare PLUS with firmware encryption becomes obsolete. [0xA3] Write DES/AES Reader Keys added. [0xC2] ISO Host for mifare Plus Communication with SoftCrypto added. [0xC1] ISO Host for DESFire Communication (High integrated for DESFire Communication) with SoftCrypto added. [0xC3] ISO Host for DESFire Communication (Flexible for DESFire Communication) with SoftCrypto added. [0xB2] [0xB2] Authent Mifare Ultralight C with SoftCrypto added. For readers connected via USB Interface: CPR40.xx-U_-_020000_EFIKL.obid.fw.xml For readers connected via asynchronous Interface CPR40.xx_-_020000_EFIKL.obid.fw.xml FEIG ELECTRONIC GmbH Page 14 of 17 SWRN CPR40xx.doc

15 General SAMCrypto Function for mifare DESFire with mifare SAM AV1 or AV2 added to standard firmware. [0x65] Get Software Version: SAM Presence-Check modified [0x66] Get Reader Info Mode 0x11 (SAM Info) added [0xC0] [0x01] Activate/Deactivate: Additional external Parameters for TC1, TC2, TBx and CLK added [0xC0] [0xBD] T=0 Data Exchange: Work Waiting Time (WWT) limitation to 9600 etu removed. New command [0xC0][0x22] GetMoreData added New command [0xC0][0xBF] ISO7816 APDU Exchange added New command [0xC3] ISO Host for DESFire Communication (Flexible for DESFire Communication) with SAMCrypto Smart Card Interface Card communication improvements Activation of 1.8V cards supported Speed up of smart card interface. Up to 6 MHz card clock possible. CPR40.xx-U_SAM_020000_EFIKL.obid.fw.xml FEIG ELECTRONIC GmbH Page 15 of 17 SWRN CPR40xx.doc

16 V (February 2012) appropriated manual H e-ID General ISO14443 improvements ISO14443-A improvements concerning Anti-Collision sequence and ATS analysis ISO14443-B Modulation index improvements ISO Error recovery enhanced ISO AMD3 compatibility improved and verified EMD (Electromagnetic Disturbance suppression) Handling added USB communication improvements RF Reset duration time changed to 6ms Command [0x66] (Get Reader Info): Mode 0x04: Parameter FNC_LST1 added Command [0x75] Adjust Antenna removed Command [0x82] Save Configuration: Protocol length calculation corrected Command [0xC1] [0xXX] High integrated for DESFire Communication updated Command [0xC2] [0xAX] MFP_SL3_Writexxx : Parameter check corrected (concerning write of 3 blocks) Command [0xC3] [0x51] DESFire GetCard UID support for TDES and AES updated Command [0xC3] [0x5C] DESFire Set Configuration support for TDES and AES updated Configuration Changed default settings CFG1: Parameter TR-RESP-TIME changed default value to 6 s, because of ISO14443 Type A Startup Frame Guard Time (SFGT) CFG3: Parameter ISO14443 BIT RATE changed default value to 106 kbit/s CFG3: Parameter ISO14443 STUPT changed default value to 0 ms CFG8 (ISO14443-A Transponder Settings) and CFG9 (ISO14443-B Transponder Settings) updated. (see Application Note N e-ID-C.doc -> available only on special request) New parameter CFG10: Mifare DESFire Scan-Mode settings added FEIG ELECTRONIC GmbH Page 16 of 17 SWRN CPR40xx.doc

17 For readers connected via USB Interface: CPR40.xx-U_-_030000_EFIKL.obid.fw.xml For readers connected via asynchronous Interface CPR40.xx_-_030000_EFIKL.obid.fw.xml General ISO7816 communication improvements Command [0xC3] [0x5F] DESFire Change File Settings [using MIFARE SAM] updated [0xC0] [0x01] Activate/Deactivate: Additional external Parameters for TC1, TC2, TBx and CLK added Smart Card Interface Card communication improvements Command [0xC0] [0x01] SAM Activate/Deactivate: New activation modes added; Voltage Class selection added. Command [0xC0] [0x23] AckAbortRequest added. Command [0xC0] [0xXX] SAM : return value IFSC CHANGE REQUEST in PSTAT added CPR40.xx-U_SAM_030000_EFIKL.obid.fw.xml FEIG ELECTRONIC GmbH Page 17 of 17 SWRN CPR40xx.doc