UNLIMITED NUMBER OF ALTERNATE UNITS AND SIZES

Transcription

1 UNLIMITED NUMBER OF ALTERNATE UNITS AND SIZES

2 The documentation in this publication is provided pursuant to a Sales and Licensing Contract for the Prophet 21 System entered into by and between Prophet 21 and the Purchaser to whom this documentation is provided ( License Agreement ). In addition, the licensed software to which this documentation refers may be supported in accordance with a customer support agreement by and between the same parties ( Support Agreement ). All warranties, conditions of use, transfer restrictions, and other provisions in the License Agreement or Support Agreement which are applicable to Licensed Software, are applicable to this publication. In addition, this publication may include inadvertent technical inaccuracies or typographical errors for which Prophet 21 is not responsible. Changes may be periodically made to this publication; these changes will be incorporated in new editions of the publication. Any questions about the material contained in the publication should be addressed to the Prophet 21 Customer Support Department at ITS-PR21. Nothing in this statement amends or extends the terms of your agreement with Prophet 21, including any warranties that might be included in our products. Warranties for such agreements are set forth in your agreement with Prophet 21. Improvements and/or changes to the Licensed Software described in this publication may be made by Prophet 21 at any time without notice. DOCUMENTATION CONVENTIONS The eyeglass symbol ( ) indicates a field on which you can browse. The star ( ) indicates the default for a field. To allow for the widest possible parameters when printing a report or performing a function, accept the defaults for all of the parameter fields. To accept the defaults, either escape through all the fields, or press [Enter] without specifying any values. Generally, samples in the documentation are shown using the default values. Start and End parameters define the limits to a range of information you will print on a report. If information does not appear on a report, it may be because the information was excluded from the Start, End range. For a detailed explanation on how maintenance screens function, refer to the Tour Guide manual. Use the search tool in Adobe Acrobat Reader 4.05c to find which manual describes a specific module, job, or function. 3/07/03 Prophet 21 Acclaim Version 14 The Prophet 21 System and Prophet 21 Acclaim are registered trademarks, and Prophet 21 and ScratchPad are trademarks of Prophet 21. All other trademarks and registered trademarks are the property of their respective companies. ii

3 Table of Contents 1 INSTALLATION INSTRUCTIONS USING THE SOFTWARE...7 CATALOG, ITEM...7 Alternate Unit Maintenance...7 SYSTEM-WIDE...8 iv

4 1 INSTALLATION INSTRUCTIONS The PKG-INSTALL module is designed to allow you to install any Prophet 21 Optional or Select Software via a serial number, instead of using a separate tape to install the feature. Before proceeding with these instructions, be sure to Stop the system. Run a Verify and the Job MISMATCH. For more information on these commands, refer to your Prophet 21 Operator s Manual. Turn all units offline. For more information on turning your units offline, refer to the Operator s Manual Make a total copy of your system. For more information on creating a total copy, refer to the Operator s Manual. After the total copy is made, keep the system stopped and turn all units online. For more information on turning your units online, refer to the Operator s Manual. At Utility Command, press [Esc] to go to the Job prompt. Press [Enter] to log into the system and get to a Job prompt or jump to box. 1. To install the Optional or Select Software, you need the shipping paper sent to you by Prophet 21. This shipping paper contains a serial number which will be used in a later step. 2. Type PKG-INSTALL at the job prompt or jump to box to display the following screen: PKG-INSTALL This program will allow you to pre-install an optional package or direct catalog feature. All that is required is the serial number, which is located on your shipping paper. Please enter serial#: 3. Enter the serial number that appears on the shipping paper sent by Prophet 21, and press [Enter]. 5

5 1 INSTALLATION INSTRUCTIONS PROPHET 21, INC. 4. If an incorrect serial number is entered, the following message appears: ** Invalid Serial Number! ** Retype the serial number from your shipping paper or contact the Prophet 21 Inside Sales Department for assistance. 5. If the correct serial number is entered, the following screen appears: ** Pre-Install Complete! ** Do you wish to run INSTALL now? (Y N) 6. To continue the installation of the Optional or Select Software, type Y and then press [Enter]. The Optional or Select Software installation screen will appear. To suspend the installation of the Optional or Select Software, type N and then press [Enter]. When you are ready to resume the installation, type INSTALL at the job prompt or jump to box and press [Enter]. The Optional or Select Software installation screen will appear. Installing: DC UNLIMITED ALT UNIT/SIZE MM/DD/YY ** No activity profile questions needed. ** ** No file or jobstream changes needed for this feature. ** Proceed? (Y N): Y Installation complete. Strike any key to continue... Enter a "Y" to Proceed, "N" otherwise. If you choose to proceed, the feature is installed. A message displays when the installation is complete. 7. When the installation has been successfully completed, remember to activate all terminals by entering GO at the Utility Command prompt.

6 2 USING THE SOFTWARE Maintain an unlimited number of alternate units and sizes for your items. The UNLIMITED NUMBER OF ALTERNATE UNITS AND SIZES Select Software allows you to maintain up to 30 alternate units and sizes for an item. In addition, the alternate units display (available system-wide) lets you view all of the units and sizes that exist for the item. CATALOG, ITEM Alternate unit information can be accessed via the Alternate unit maintenance option on the Item and Catalog main menus. ALTERNATE UNIT MAINTENANCE The Alternate unit maintenance option is used to enter additional units in which an item is purchased or sold. The screen shows the standard units (those specified in Item/Catalog Maintenance), and allows the entry of upto 30 alternate units and sizes for the item. The Alternate Units window holds up to 30 different units in which the item can be bought or sold. 7

7 2 USING THE SOFTWARE PROPHET 21, INC. SYSTEM-WIDE =================================================================================== Units: XX XX XX XX XX XX "+" More Sizes: "-" Prev The Alternate Units information display shows information for five alternate units at a time. Use the "+" to view the next five, and a "-" to view the previous five. 8