Table of Contents. 12 I have a Samsung or Lenovo Notebook with Intel HD Graphics. Why Can't I Adjust the Brightness of the Display?

Transcription

1 Table of Contents Table of Contents Samsung Laptops, Netbooks and Tablets Frequently Asked Questions (FAQ) Notebook Chargers - Notes on the use of third party chargers and diagnosing problems What is Samsung ExpressCache? Installation, Drivers and Software Troubleshooting Flickering or Dimming Display - Samsung Notebooks NP400B2B / NP400B4B How to Recover your Samsung Laptop back to Factory Software How to Troubleshoot Machines that fail to start Windows I cant install the AMD Hybrid Graphics driver on my Samsung NP350E7C-S02UK on Windows 7. What can I do? 12 I have a Samsung or Lenovo Notebook with Intel HD Graphics. Why Can't I Adjust the Brightness of the Display? 13 Why can't I adjust the Screen Brightness of my Samsung Notebook in Windows 7? 14 Why cant I use KMS activation to activate Windows 7 on my Samsung laptop purchased with Windows 8? 15 Wireless Guide 1: Troubleshooting signal problems such as low signal strength Samsung Laptops, Netbooks and Tablets 1

2 Samsung Laptops, Netbooks and Tablets Samsung Laptops, Netbooks and Tablets 2

3 Frequently Asked Questions (FAQ) Samsung Laptops, Netbooks and Tablets 3

4 Notebook Chargers - Notes on the use of third party chargers and diagnosing problems Use of Third Party Chargers Use of third party laptop chargers on Stone branded laptop products is supported but only when an appropriate charger is used. Use of a charger of the wrong rating or connector may void your product warranty, and may cause product damage. Guidelines on the use of Third Party Chargers DO use a charger of the same voltage as the original charger. Chargers that supply a lower or higher voltage should not be used. Most laptops have confirmation of the input voltage required on a label on the underside of the machine DO use a charger of the same or greater power output, either in watts (W) or amps (A). DO use a charger that provides a regulated output. Most laptop chargers do provide a regulated output, however many low cost generic power adapters (i.e. power adapters not built specifically for laptops) do not provide a regulated output. We recommend the use of branded charges which clearly show the CE Marking, and show if thedevice is Class 1 or Class 2. Example For an original adapterthat supplies19v 3.42A (65W) please see the following examples of substitute adapter and whether or not they can be used: Rating / Output Can this be used? 18.5V 3.5A No. The voltage is too low (18.5V), so even though the total power output is sufficient the adapter should not be used. 19V3.0A 19V 4.74A 24V 3.42A No. The current available (3.0A) is too low. The adapter will not be able to provide sufficient power This adapter supplies the correct voltage (19V) and can supply ample current (4.74A is more than 3.42A). This adapter can be used as long as the connector size and polarity exactly matches the old adapter. No. The voltage is too high (24V). Key: V = Volts, or voltage. Measurement of electrical pressure. A = Amps;measurement of current or electrical flow. W = Power in Watts - total power derived by multiplying the voltage (V) and amps (A). Note:If you are unsure as to the suitability of a replacement third party AC adapter please contact support before using the adapter. Alternatively, Stone may be able to supply you with a replacement adapter. Diagnosis Some notebook or tablet chargers have an LED directly on the charger itself. This LED is only useful to tell you that there is mains present (for example, that the fuse is OK). If the LED is not functioning, AC mains could still be present but the charger has failed. Conversely, even if the LED is illuminated, this does not guarantee that the charger is fully functional. Other Do's and Don'ts Applies to: Always replace the mains adapter if the cable becomes damaged or frayed Always keep the mains adapter and the notebook away from water or sources of moisture Never attempt to repair a mains adapter yourself. The only user replaceable components is the mains fuse on the mains lead, and the mains lead itself. Laptop and tablet products Samsung Laptops, Netbooks and Tablets 4

5 What is Samsung ExpressCache? Samsung ExpressCache This is a technology to improve the performance and responsiveness of some models of Samsung notebook or ultrabook. It works by caching data that is written to or read from the systems main, traditional, mechanical hard drive. The ExpressCache drive is typically only 24GB in size. The aim is to deliver significant performance improvements without incurring the cost of equipping the system with a full sized SSD hard drive, for example a 128GB SSD drive. How Do you Configure ExpressCache? The operating system should be installed to the main, larger hard drive as normal. Then use the Samsung Easy Settings manager to configure Express Cache settings. Can I Upgrade the ExpressCache? The Expresscache module on many Samsung systems cannot be upgraded. In this situation you cannot replace the chip or cache unit as it is directly soldered onto the motherboard. Example:The SamsungNP530U3C-A07UK has an issd fixed cache module which cannot be upgraded. If the unit develops a problem, the motherboard will need to be replaced. You cannot fit a module such as Stone part code ECCHAR-279. What Are the Limitations on ExpressCache? The ExpressCache can only benefit the systemperformance if the data has been read before. This means that the system does not reach SSD-only performance levels. Additionally, as the ExpressCache caching is controlled through software, the information stored on it is always unencrypted. Customers that use bitlocker or other encryption methods should be aware that data segments stored on the Expresscache are not encrypted and could potentially be forensically retrieved. Organisations in this case should check that the product meets their security needs. Applies to: Samsung notebook and ultrabook products that use Expresscache or are fitted with an issd Samsung Laptops, Netbooks and Tablets 5

6 Installation, Drivers and Software Samsung Laptops, Netbooks and Tablets 6

7 Troubleshooting Samsung Laptops, Netbooks and Tablets 7

8 Flickering or Dimming Display - Samsung Notebooks NP400B2B / NP400B4B Problem The screen may dim randomly or flicker on the Samsung Business Notebooks NP400B2B or NP400B4B. Cause This issue is caused by an updated Intel Graphics driver which is incompatible with these machines. If the problem appeared without a recent changed in driver (or other software change - for example, a recent batch of Windows Updates) then you are not affected by this issue. Check to see which version of the Intel graphics driver you have installed by looking at the display driver properties in Device Manager. The Intel graphics driver versions above x installed from Intel's website are incompatible with these models and cause an issue with the Samsung Display Manager software. Resolution To resolve this issue: Download the recommended driver published on Samsungs official website (for example, here) and select VGA (Graphics), Intel xxxx. Uninstall the incompatible display driver and the Samsung Display Manager. Restart the notebook Now update the display driver with version xxxx downloaded from the Samsung site and then reinstall the Samsung Display Manager Display manager will now function correctly and the dimming or flickering will be resolved. Applies to: Samsung Business Notebooks NP400B2B / NP400B4B Samsung Laptops, Netbooks and Tablets 8

9 How to Recover your Samsung Laptop back to Factory Software Recovering Windows to the Factory State Samsung laptops include an inbuilt recovery solution which allow you to restore the machine to the initial factory state. This is useful if Windows no longer boots, or has been severely damaged or affected by malware, viruses etc. Note:Most recovery options completely restore the system to the factory state. This will result in the removal of all user data including add-on programs, documents, favourites, desktop icons etc. Data should be backed up first if possible. If you need to backup your data and can't start Windows, you may need to contact your IT department for them to do this for you. Stone can also offer a service where we can carry this out for you at an additional cost. Steps Applies to: Shut down the machine if already running. Start the machine. Start tapping the F4 key straight away. Follow the onscreen instructions. Samsung laptops, netbooks and tablets running Microsoft Windows Samsung Laptops, Netbooks and Tablets 9

10 How to Troubleshoot Machines that fail to start Windows Scenario Your system starts loading Windows and then the system appears to reset without any error message being displayed on screen. You may or may not be able to see a blue screen appear for a brief moment before the system resets The system continues to reset at the same point during the boot process, and Windows never loads. How to Troubleshoot This Scenario There are numerous causes of this problem: Software damage caused by a virus A recent change to hardware - for example, something you recently plugged in, changed or upgraded A BIOS update which has changed some BIOS settings back to default (see SATA controller mode, below) A PC that has been newly reimaged (again, see SATA controller mode, below) A system that was not shut down cleanly - i.e. the power was turned off without Windows being shut down (see Disk Consistency check, below) Failing hardware such as a memory fault, hard disk drive fault, or other component issue. If you are working inside a managed IT environment (for example a large school, a college or a university), in many instances, if your PC does not contain your data or files, it is often advisable to request that your system is reimaged first. This eliminates problems cause by viruses, unclean shutdowns and often BIOS settings. If you need to troubleshoot the ready for the reboot please follow the process below. How to Get the Stop Code from the blue Screen The first stage is to get the Stop code which is momentarily reported by Windows before the system resets. This stop code, along with any text message, may help in the identification of the root cause. 1. Start the system and after the Stone splash screen, start tapping the F8 key to enter Advanced Boot Options. 2. You should now see the screen below. 3. Using the arrow keys on your keyboard highlight 'Disable automatic restart on system failure' and press Enter. The system will reboot and windows will begin to load, but this time when the problem occurs the STOP message will be displayed. For example: Stop 0x B Inaccessible Boot Device Usuall causes: - SATA Controller Mode Samsung Laptops, Netbooks and Tablets 10

11 Change the Serial ATA Controller mode type from AHCI to IDE, or IDE to AHCI in the system BIOS. This problem normally only occurs on a newly imaged system, or a system that has just had a BIOS update. BIOS updates can cause BIOS settings to be lost meaning that the Serial ATA Controller mode is set incorrectly. To change the SATA controller settings, carry out the following procedure: 1. Restart the notebook and press the F2 to enter the BIOS. 2. Select the 'Advanced' tab, change the SATA controller setting from 'AHCI' to 'IDE', or 'IDE' to 'AHCI' 3. Select the 'Exit' tab, click on 'Save changes and Exit' (or press the F10 key). 4. Restart the system and it should now boot into Windows. - Unclean Shutdown - Disk Consistency Check Required The file system is damaged. This can normally be fixed by reimaging the system, or by booting from a Windows CD and initiating a file system consistency check (CHKDSK). IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA These messages are often caused by a driver update, or an additional device plugged into the system. Unplug any recently added devices, especially any USB to serial adapters. If this does not resolve the problem, try rolling back to the previous driver configuration: 1. Start the system and after the Stone splash screen, start tapping the F8 key to enter Advanced Boot Options. 2. Select the option to use Last Known Good Configuration 3. If the system still does not boot, you may need to boot in Safe mode and then uninstall any recent driver update or software change. If you have a stop code or blue screen error message which is not covered above, try these steps: 1. Unplug any recently added hardware 2. Try using the Last Known Good Configuration 3. Try booting in Safe mode (then uninstall any recently added program or driver update) 4. Use the Microsoft System Recovery options, here. 5. Reimage the system (ensure that any data or documents on the machine are backed up first. If you cannot boot the system you will need your IT team to do this for you, or alternatively please contact Stone to find out what additional services we may be able to offer you, at an additional cost). 6. If you suspect your system has a hardware fault, please contact Stone support. Samsung Laptops, Netbooks and Tablets 11

12 I cant install the AMD Hybrid Graphics driver on my Samsung NP350E7C-S02UK on Windows 7. What can I do? Problem The AMD Hybrid Graphics driver provided by Samsung for the NP350E7C-S02UK under Windows 7, possibly provided through the Samsung download center or the Easy Update manager, will not install or does not function. Cause The cause is that this model is intended primarily for use with Windows 8 by Samsung. Windows 7 driver support is limited. How to Solve this Issue Install an alternative version of the AMD Hybrid Graphics driver, provided for the NP350V5C-A06UK, at the Samsung download center here. Note: This driver is also available from the Stone FTP Applies to: Samsung NP350E7C-S02UK Samsung Laptops, Netbooks and Tablets 12

13 I have a Samsung or Lenovo Notebook with Intel HD Graphics. Why Can't I Adjust the Brightness of the Display? Problem Some models of older notebook do not allow you to adjust the display brightness if you use an updated Intel HD Graphics Video driver. This means that the following functionality doesn't work: Automatic reduction of screen brightness to save energy, when disconnecting the AC mains supply. Automatic brightness reduction depending on ambient light level (certain applicable models only) The ability to adjust the screen brightness manually depending on personal preference, using the function keys. This behaviour has been seen in Lenovo and Samsung models and may apply to others. It mainly applies to systems that use Sandybridge CPUs (Intel HD Graphics HD 2000 / HD 3000) and Ivybridge CPUs (Intel HD Graphics HD 2500 / HD 4000). Cause This issue is caused by a manufacturer customisation of the video system. If you install the older, manufacturer provided original video driver and the functionality returns, then you may be affected by this issue. If you have upgraded your video driver, or perhaps upgraded operating system and have automatically received a later video driver, and the problem appears, then again, you are likely affected by this issue. For example: Samsung NP400B4C-A01UK Latest Provided Samsung Reference Video Driver: Intel HD4000 Graphics Driver for Windows 7 64bit Upgrading to a newer Windows 7 driver from Intel stops the brightness adjustment functionality from working. Reverting to either the Samsung driver or the driver from Intel directly restores the functionality. Upgrading to Windows 8.1 or Windows 10 and using the latest Intel Video Driver (either from Microsoft or from Intel) will again stop the brightness adjustment functionality from working. Resolutions Please follow the steps below to resolve this problem: 1/ Check your notebook's manufacturer's website for an updated video driver for your model and operating system. 2/ Or, check to see if there is an updated Onscreen Display or Hotkey Utility for your model and the new operating system. In the case of the example Samsung NP400B4C, neither of these apply. There are no newer video drivers available for Windows 8.1 or Windows 10 which provide this functionality. The Samsung Easy Settings program from Windows 8 can be installed on Windows 8.1 or Windows 10, but does not provide this functionality. 3/ We have a third alternative resolution which involves a registry fix. This has been tested on Windows 8.1 and Windows 10 on both Samsung and Lenovo machines. Note: This registry fix has been tested on a limited number of models and situations. Please thoroughly test that this registry fix solves your problems and meets your user's needs before deploying it on a wide scale. Download the file attached Extract the.reg file and double click to install it onto the target system. Reboot the system. Test that when you disconnect the AC mains adapter, that the screen dims automatically. If it does not, check your Power Plan that it is configured correctly. Test that the brightness hotkeys function. If it does not, and the onscreen Windows brightness indicator graphic does not appear, you may need to reinstall the Video driver using the full package from the Intel website, then reapply the fix again, reboot, and re-test. If the Windows provided graphics indicator does appear and the brightness level does not adjust, ensure you rebooted the system after applying the fix. If the fix stil does not appear to work, try the alternative registry file, reboot and re-test. Please also note that if you reinstall or upgrade the video driver in the future, you will need to reapply the fix. If you are managing multiple users in a domain environment, you may wish to deploy the registry settings as part of computer settings group policy. This fix works by changing the value of FeatureTestControl" to 0000f048 in several places in the registry. 4/ As a final option, try using the Microsoft Basic Display Adapter driver instead of the updated Intel HD Graphics display driver. However, note that video performance is likely to be reduced and the system may even have less battery runtime as it may consume more energy. Steps Applies to: Third Party Branded Notebooks with 2nd or 3rd Generation Intel Core Processors, using Intel HD Graphics. Samsung Laptops, Netbooks and Tablets 13

14 Why can't I adjust the Screen Brightness of my Samsung Notebook in Windows 7? Problem The function key for adjusting the brightness doesn't work The screen is too dim, especially when on battery, and cant be increased Cause This is caused by incorrect driver and/or application software being installed. Resolution Ensure that the Samsung Easy Settings Manager for Windows 7 for your model is installed (Remove other Windows XP only Samsung applications that you may have installed - for example, the Samsung Easy Display Manager for the NP370R5E is only for use with Windows XP). If the problem is still not resolved, use the Samsung specifically provided video driver?often the Samsung Easy Settings Manager may only with the exact video driver version that it was designed for or tested with??? Tip: If you do have to downgrade to a specific Samsung provided video driver, you can prevent Windows Update from automatically re-upgrading the video driver by hiding the update which contains the driver. Applies to: Samsung Notebooks supported under Windows 7 such as the NP370R5E Samsung Laptops, Netbooks and Tablets 14

15 Why cant I use KMS activation to activate Windows 7 on my Samsung laptop purchased with Windows 8? Problem Windows 7 KMS Product Activation may not work on Samsung laptops purchased with Windows 8 (non-pro). You may not be able to activate Windows 7 machines using a Key Management Server (KMS) on these models. KMS Activation is a common method of performing Microsoft Product Activation on large numbers of machines (more than 25) in an organisation. Cause This is caused by the Windows 8 BIOS of the Samsung machine not having the necessary SLIC tables for Windows 7 activation. As Windows 8 (non- Pro) does not have any downgrade rights to Windows 7, these SLIC tables have not been included. Windows 7 KMS activation requires that the machine was purchased with an eligible version of Windows. Windows 8 (non-pro) is not eligible as Windows 8 does not have downgrade rights. Work Around Purchase machines that have downgrade rights to Windows 7 (for example, purchase machines which include a Windows 8 Pro license) Use a Multiple Activation (MAK) key instead of KMS. Please note that you will need to check your licensing agreement for the eligibility and availability of a MAK key for Windows 7 for your organisation. You may need to adjust your software image or image deployment method for the replacement method. Ensure that you are licensed to use this method. Purchase machines that already have a suitable Windows 7 license for you to upgrade to your intended Windows 7 product. Additional Information See Microsoft KB Article Applies to: Samsung branded notebook products sold with Windows 8 (non-pro) Potentially other branded notebooks, such as Toshiba, sold with the same operating system Samsung Laptops, Netbooks and Tablets 15

16 Wireless Guide 1: Troubleshooting signal problems such as low signal strength Wireless Guide 1 Use the guide below to assist you in troubleshooting signal problems such as low signal strength or low throughput performance on wireless networks. Low Signal Strength Consider Your Expectations How far away from the access point are you? How many walls or obstructions are between you and the access point? Are you connecting to a 2.4GHz or 5GHz network? 2.4GHz networks are more crowded and therefore subject to more interference. 5GHz networks are less crowded however the signal deterioates more quickly i.e. the signal doesn't travel as far. Whereas 2.4GHz networks will go through 2-3 walls in close proximity to the access point (less than 3M between walls) a 5GHz network signal will only go through 1-2 walls at the same proximity. If possible, try the equipment in a different location and/or on a different access point to determine if it is localised interference which is causing your problem. If you are in a large multi-access point wireless network, ensure that the machine has roamed, or that you are connected to the nearest wireless access point. Some managed network systems will manage the clients roaming or transfer to a different access point Use any managed infrastrucure system to tell you which access point the client device is connected to, if you cant tell from the device itself For example, on some systems, such as Meru, the virtual access point feature makes it difficult from the client end to determine which physical access point the client is connected to, as the access point MAC address is virtualised. Try adjusting the network cards "roaming agressiveness" setting. Increase the aggressiveness to make the system look for stronger signals from other access points sooner, however this may result in more frequent brief disconnections whilst the system moves from one access point to another: Reduce the possibility of being Affected by Interference Turn off Bluetooth devices in the area if you are using 2.4GHz If using 2.4GHz, try using the 5GHz spectrum instead If you are using an unmanaged wireless infrastructure but have 5GHz capability, use a differently named SSID for the 5GHz network and set this higher in the network preference order. Samsung Laptops, Netbooks and Tablets 16

17 Legacy or basic unmanaged systems: Try changing the wireless channel that is used. Try removing legacy client devices from the network b wireless devices can caused signal and performance problems on modern wireless networks, as these devices require too much "airtime" to transfer data efficiently. Turn off support for legacy client devices on your wireless system. Where possible, support for b and g devices should be disabled. Try different locations and eliminate possible sources of interference - cordless phones, wireless cameras etc. Other Tips Applies to: Ensure that your wireless access point has up to date firmware. Ensure your wireless network card driver is up to date. Make sure you use WPA2 and AES encryption. The use of WPA/TKIP will result in drastically reduced wireless system throughput. Enable Wireless AC features on your access point, if available, and use Wireless AC devices where possible. Wireless AC presents a significant performance improvement over Wireless N. Ensure your wireless system has the faster transmission modes enabled. All mobile products with wireless functionality. Samsung Laptops, Netbooks and Tablets 17

18 Samsung Laptops, Netbooks and Tablets 18