Dell Statistica Silent Installer Instructions

Transcription

1 Dell Statistica 12.7

2 2015 Dell Inc. ALL RIGHTS RESERVED. This guide contains proprietary information protected by copyright. The software described in this guide is furnished under a software license or nondisclosure agreement. This software may be used or copied only in accordance with the terms of the applicable agreement. No part of this guide may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording for any purpose other than the purchaser s personal use without the written permission of Dell Inc. The information in this document is provided in connection with Dell products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Dell products. EXCEPT AS SET FORTH IN THE TERMS AND CONDITIONS AS SPECIFIED IN THE LICENSE AGREEMENT FOR THIS PRODUCT, DELL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL DELL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF DELL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Dell makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice. Dell does not make any commitment to update the information contained in this document. If you have any questions regarding your potential use of this material, contact: Dell Inc. Attn: LEGAL Dept 5 Polaris Way Aliso Viejo, CA Refer to our Web site (software.dell.com) for regional and international office information. Trademarks Dell, the Dell logo, and Statistica are trademarks of Dell Inc. Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell disclaims any proprietary interest in the marks and names of others. Legend CAUTION: A CAUTION icon indicates potential damage to hardware or loss of data if instructions are not followed. WARNING: A WARNING icon indicates a potential for property damage, personal injury, or death. IMPORTANT, NOTE, TIP, MOBILE, or VIDEO: An information icon indicates supporting information. Dell Statistica Updated May 2015 Version 12.7

3 Contents Products supported... 4 Operating system... 5 Prerequisites... 6 Syntax... 8 User interface... 8 Install properties... 8 Option log file... 9 Launching through setup.exe... 9 Installing via the command line Single user Workstation Uninstalling via the command line About Dell Contacting Dell Technical support resources

4 1 Products supported Single-User and Workstation installs can be deployed silently. Server installs cannot be deployed silently. The following Statistica products can be deployed silently: Single-User (32-bit and 64-bit) [Domain-Based Registration (DBR) is NOT supported] Concurrent Network License Workstation (32-bit and 64-bit) Concurrent Network License with Borrowing Workstation (32-bit and 64-bit) Statistica Enterprise Workstation (32-bit and 64-bit) Note that Workstation installs with Domain-Based Registration (DBR) can be deployed silently. 4

5 2 Operating system Windows Vista Windows 7 Windows 8 Windows Server 2003 Windows Server 2008 Windows Server 2008 R2 Windows Server

6 3 Prerequisites Internet Explorer 7 or later must be installed prior to using the Statistica MSI Installer. 6

7 7

8 4 Syntax Syntax for the Statistica MSI Installer includes the user interface, install properties, and an optional log file. User interface You can control the amount of User Interface you see during the install process by using various switches. UI options include: /qn /qr /qf /passive No user interface (completely silent mode). This can also be specified as /quiet Reduced user interface with a modal dialog box displayed for successful registration Full user interface. This is the default if no user interface options are specified Passive user interface with a progress bar to indicate that an installation is in progress NOTE: For Vista and later operating systems: If installing to Windows Vista, you will see an elevation prompt when the install execute sequence begins. When running the installer in completely silent mode (/qn), you must start the install from an elevated command prompt; otherwise the installer will fail because completely silent installs will not prompt for elevation. Install properties The following properties can be defined for installs: Required Installation Codes (Single-User only): SERIALNUMBER PRODUCTKEY INSTALLCODE StatSoft-supplied Serial Number StatSoft-supplied Product Key StatSoft-supplied Install Code Required User Registration Information (Single-User only): REG_FIRSTNAME REG_LASTNAME REG_COMPANY REG_TITLE REG_ADDRESS REG_CITY User First Name User Last Name Company Name User Title Address City REG_COUNTRY Country Uses the full country name and is case sensitive. (e.g., Germany or United States ) REG_STATE State This is the two-letter state/province abbreviations for the United States and Canada (e.g., 'TX' or 'ON', for Texas and Ontario). For all other countries, the 8

9 REG_ZIP REG_PHONE REG_ REG_ 2 full name is used. This property is also case sensitive. For the United States, Canada, France, and Australia, the state property must match one of the states from the drop-down box, or it will be reset. For all other countries, the state property can be any value. Zip/Postal Code Phone Number Optional installation path (Single-User or Workstation): Address First Field (needed for product registration) Address Second Field (must match the first address field) INSTALLDIR Installation directory; if not supplied, defaults to C:\Program Files\StatSoft\Statistica 12 Certain installations may want to install to a non-default path such as E:\Statistica 12 Optional shortcut flag (Single-User or Workstation): B_DESKTOP_SHORTCUT When set to 1, a shortcut to Statistica is created on the All Users desktop When set to 0, no shortcut is created Optional multimedia flag (Single-User or Workstation): INSTALLMULTIMEDIA When set to 1, multimedia overviews (over 300 MB) are installed When set to 0, overviews are not installed Optional license manager shortcut flag (Workstation only): INSTALLLICENSEMANAGER When set to 1, Concurrent License Manager shortcut to the Start Menu is enabled When set to 0, shortcut is not enabled Optional server flag (Concurrent Network License with Borrowing Workstation only): NETWORKINSTALL When set to 1, files are installed to run from the server When set to 0, files are copied locally Optional legacy tools flag (Enterprise Local Workstation only) INSTALLLEGACYTOOLS When set to 1, Legacy Enterprise Tools (Historical Data Edit and Gage Setup) are installed on a local Enterprise workstation When set to 0, tools are not installed Option log file For detailed debugging, you can enable MSI logging with the /l* <logfile> switch: msiexec /i "D:\Statistica msi" /qn /l* c:\install.log Launching through setup.exe Launching the msi directly through msiexec will not check for (or install) any prerequisites that may be missing. Thus, the prerequisites should be preinstalled, or the silent installation should be launched through setup.exe. Use the /s argument to run the setup.exe in silent mode and the /v argument to pass in all msi properties. MSI properties containing spaces should use quotes escaped by a backslash. D:\setup.exe /s /v SERIALNUMBER=xxx PRODUCTKEY=xxx INSTALLCODE=xxx REG_COUNTRY=\"United States\" /qn 9

10 Installing via the command line Following are example Single-User and Workstation silent installs. Note that strings that include embedded spaces must be enclosed by double-quotes (e.g., "StatSoft, Inc."). Single user The Single-User silent install utilizes the user registration (REG_* properties) and key (PRODUCTKEY, INSTALLCODE, and SERIALNUMBER) properties. When performing a Single-User silent install, the installer will attempt to contact the StatSoft registration server to register your software electronically during the install. If automatic registration is not possible, a temporary 14-day license file will be created instead. This example uses the /qn switch (a completely silent install) and specifies a desktop shortcut. Note that address information containing spaces are enclosed by double-quotes. msiexec /i "D:\Statistica msi" /qn B_DESKTOP_SHORTCUT=1 PRODUCTKEY=XXXXXXXXX INSTALLCODE=XXXXXXX SERIALNUMBER=XXXXXXXXX REG_FIRSTNAME=John REG_LASTNAME=Doe REG_TITLE=Statistician REG_COMPANY="ACME Inc." REG_ADDRESS="2300 E 14th St" REG_CITY=Tulsa REG_STATE=OK REG_COUNTRY="United States" REG_ZIP=74104 REG_PHONE= REG_ =user@company.com REG_ 2=user@company.com The same command launching through setup.exe to include pre-requisite installation: D:\setup.exe /s /v /qn B_DESKTOP_SHORTCUT=1 PRODUCTKEY=XXXXXXXXX INSTALLCODE=XXXXXXX SERIALNUMBER=XXXXXXXXX REG_FIRSTNAME=John REG_LASTNAME=Doe REG_TITLE=Statistician REG_COMPANY=\"ACME Inc.\" REG_ADDRESS=\"2300 E 14th St\" REG_CITY=Tulsa REG_STATE=OK REG_COUNTRY=\"United States\" REG_ZIP=74104 REG_PHONE= REG_ =user@company.com REG_ 2=user@company.com Workstation The Workstation silent installer excludes user registration and key information, which are part of the server install. You can map a drive to the \Statistica 12\ folder on the server: msiexec /i "D:\Workstation Installer 32\Statistica msi" /qn or D:\Workstation Installer 32\setup.exe /s /v /qn Alternatively, you can use the UNC path to the \Statistica 12\Workstation Installer 32\ folder on the server: or msiexec /i " \\ServerName\Statistica 12\Workstation Installer 32\Statistica msi" /qn \\ServerName\Statistica 12\Workstation Installer 32\setup.exe /s /v /qn Note that you cannot map a drive directly to the Workstation Installer 32/ 64 directory. Uninstalling via the command line Here is an example Single-User silent uninstall. Note that strings that include embedded spaces must be enclosed by double-quotes (e.g., "StatSoft, Inc."). A previous installation can be uninstalled by using the following command-line: 10

11 msiexec /uninstall "D:\Statistica msi" The parameter can either specify the original MSI file or the Product Code, which is a code associated with each release of Statistica. This code can be read from the registry by finding the Statistica Add/Remove program file entry from the registry key: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall For example, here is a registry location of the Add/Remove program entry for Statistica: KEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{909b6a0e-bd cd4-63a08cfb9a6d}, where {909b6a0e-bd cd4-63a08cfb9a6d} is the Product Code. The syntax to uninstall that version using the Produce Code is: msiexec /uninstall {909b6a0e-bd cd4-63a08cfb9a6d} 11

12 12

13 5 About Dell Dell listens to customers and delivers worldwide innovative technology, business solutions and services they trust and value. For more information, visit Contacting Dell Technical Support: Online Support Product Questions and Sales: (800) Technical support resources Technical support is available to customers who have purchased Dell software with a valid maintenance contract and to customers who have trial versions. To access the Support Portal, go to The Support Portal provides self-help tools you can use to solve problems quickly and independently, 24 hours a day, 365 days a year. In addition, the portal provides direct access to product support engineers through an online Service Request system. The site enables you to: Create, update, and manage Service Requests (cases) View Knowledge Base articles Obtain product notifications Download software. For trial software, go to Trial Downloads. View how-to videos Engage in community discussions Chat with a support engineer 13