SFT Installation Use. SFT Installation - Use A - D 1

Size: px

Start display at page:

Download "SFT Installation Use. SFT Installation - Use A - D 1"

Ambrose Brown
5 years ago
Views:

1 SFT 2801 Installation Use SFT Installation - Use A - D 1

2 contents introduction 3 ACE 900 connection kit 4 graphical interface 5 user guide 7 reading characteristics 12 operations on characteristics Erreur! Signet non défini.5 disturbance records 18 application identification 1 printing 1 installing SFT appendix 1 SFT 2801 keys / keyboard equivalencies 28 appendix 2 example of Sepam 2000 parameter readout 29 SFT Installation - Use A - D 2

3 introduction description The SFT 2801 application is a software tool that may be used instead of the "TSM 2001 pocket terminal" under Windows 95, 98 and NT 4.0. Furthermore, the SFT 2801 application provides additional functions for reading, printing and storage of Sepam 2000 parameters and for retrieving disturbance records. It is installed on a PC connected to the front of Sepam 2000 via an adapter. functions All the TSM 2001 pocket terminal functions are included in the SFT 2801 application. The functions used to read and set the various Sepam 2000 parameters (measurements, protections, etc.) in the software version of TSM 2001 are similar to the pocket terminal functions (dialog via menus and submenus; cf manual ref ). The following additional functions are made available by the software version : general readout of Sepam 2000 characteristics. saving and restoring of all Sepam 2000 characteristics. printing of a report containing the values of all the Sepam 2000 characteristics. retrieval of a disturbance record saving of a disturbance record required set-up The minimum set-up is given in the installation section. SFT Installation - Use A - D 3

4 ACE 900 connection kit kit contents connection The ACE 900 connection kit supplied with SFT 2801 is made up of : 1 Sepam - RS232 interface 1 PC - interface serial connection cord The interface should be plugged into the inlet on the front of Sepam 2000, behind the small flap door. The other end is connected to the COM1 or COM2 communication port (whichever was selected at the time of installation) on the PC. front of Sepam interface should be plugged into the inlet It is mandatory for the ACE 900 connection kit supplied in SFT 2801 kit to be used to connect the PC and Sepam The use of any other cord is liable to cause Sepam 2000 operating difficulties. environmental specifications dielectric dielectric withstand IEC /5 0.5kVeff CM 1.2/50µs impulse wave IEC /5 1kV MC, 0.5kV DM climatic operation IEC to 55 C storage IEC to 70 C electromagnetic radiation IEC V/m IEC V/m electrostatic discharge IEC kV 1MHz damped oscillating IEC kV MC, 0.5kV DM wave 5ns fast transient IEC kV CM, DM direct coupling 4kV CM capacitive coupling CM = common mode DM = differential mode SFT Installation - Use A - D 4

5 graphical interface design The SFT 2801 application is materialized in Windows by a graphical interface (window) representing the TSM 2001 pocket terminal. A B C D A the title bar displays the name of the application: "SFT 2801" followed by identification of the Sepam when a Sepam is connected to the PC. B the menu bar gives access to the SFT 2801 special features C the display field may be one of two types : an SFT 2801 information screen an TSM 2001 type screen, with four 20-character lines. D control buttons which match the TSM 2001 pocket terminal keyboard keys display zone SFT 2801 keyboard The software version display is the same as the TSM 2001 pocket terminal display: four 20-character lines. The same blinking also occurs. The cursor at the beginning of a line is indicated by a blinking ">" character. Pressing a key on the SFT 2801 keyboard may be reproduced in two ways : using the mouse, by clicking on the corresponding button. SFT Installation - Use A - D 5

6 graphical interface using the PC keyboard, by pressing the corresponding key. The key is generally identified by the name which appears on the control button on the SFT 2801 keyboard (cf Appendix 1). behaviour The SFT 2801 application complies with the usual MS-Windows rules and operating procedures, which are not reminded here. In case of necessity, please refer to the manuals supplied with your computer. SFT Installation - Use A - D 6

7 user guide starting up the application In the Windows Program Manager, double-click on the SFT 2801 icon. The window below appears in the centre of the screen. When pressing Enter, the following warning window is displayed. SFT Installation - Use A - D 7

8 user guide When this message is acknowledged, the SFT 2801 main window is displayed. PC/Sepam dialog is not activated until communication has been initialized. SFT Installation - Use A - D 8

9 user guide customization of application This function allows to customize the program language and the serial I/O port of computer connected to Sepam. To change the language, select Customization then Languages. Select then the new language. To change the I/O port, select Customization then PC port name. Select then the new port. SFT Installation - Use A - D 9

The application needs this time to test the Sepam to obtain its identifier.

10 user guide initializing communication To initialize communication between the PC and Sepam, click on the keyboard. control button or press function key F5 on the PC Although the window is displayed, it remains inactive for 5 to 10 seconds, during which time no action is possible. The application needs this time to test the Sepam to obtain its identifier. The window becomes active when the reading of Sepam identification has been completed : the title bar then displays the identifier of the Sepam connected to the PC in addition to the application name. The "Identifying" message disappears from the display field, giving way to the usual Sepam opening menu. In this status, the user may use the software version of TSM 2001 in exactly the same way as the pocket terminal. SFT Installation - Use A - D 10

user guide scanning Sepam As of the time that communication is initialized, SFT 2801 continually scans the link with the Sepam connected to the PC on which the application is running.

11 user guide scanning Sepam As of the time that communication is initialized, SFT 2801 continually scans the link with the Sepam connected to the PC on which the application is running. If the Sepam connection is down (connection cord damaged or Sepam disconnected or not energized...), SFT 2801 detects interrupted dialog and displays : The graphical interface is inactive until the user validates the message window by clicking on the "OK" button. Communication must then be initialized again. SFT Installation - Use A - D 11

12 reading characteristics description activate This function is a general readout of Sepam characteristics. It works by reading the following Sepam parameters : Sepam identification and software versions ("About Sepam" choice). Sepam settings ("Status" choice). Protection settings ("Protections" choice). Parameters ("Program logic" and "Parameters" choice). Timers ("Program logic" and "Timer") choice. To activate reading of all the characteristics, select the Charact. Then Read item in the SFT 2801 menu bar. The SFT 2801 graphical interface becomes inactive and the following message is displayed : The Sepam characteristics reading operation takes about 2 to 6 minutes, depending on the Sepam configuration. The operation may be interrupted at any time by clicking on the "Cancel" button or by pressing the "Return" key on the PC keyboard. When the operation is interrupted, the SFT 2801 window becomes active again, the dialog between the PC and Sepam is reinitialized and the Sepam opening menu appears again in the display field. SFT Installation - Use A - D 12

reading characteristics view If the characteristics reading operation is successfully completed, a full screen size characteristics display window appears.

The window also includes 3 control buttons : record To save the characteristics that have been read, click on the "Record" control button. A dialog box is then displayed.

13 reading characteristics view If the characteristics reading operation is successfully completed, a full screen size characteristics display window appears. A slider bar (scroll bar) located on the right-hand side of the display field may be used to scroll its contents vertically. The window also includes 3 control buttons : record To save the characteristics that have been read, click on the "Record" control button. A dialog box is then displayed. This box is used to choose a name to identify the characteristics that will be saved. The name of the Sepam being examined is proposed (the name appears in the title bar of the main screen and the characteristics display window). When several Sepams have the same name (as in the case of the standard applicationsof the Sepam 2000 catalogue), it is necessary to modify the proposed name to record and save the characteristics of the Sepams which have the same name. SFT Installation - Use A - D 13

14 reading characteristics Once the user has confirmed the name to be used for the save, the text of the displayed characteristics is stored on the PC disk and may be retrieved for subsequent printing or saving operations. If several storage operations are carried out for the same Sepam, only the most recent one is kept. The date of storage of the characteristics is memorized. The data structure used is a text file, the contents of which are an exact replica of the text displayed in the display window (cf example in Appendix 2). The name given for the stored data will appear on the first page of the printout of characteristics under the heading "Sepam Name". The actual name of the Sepam application is given in the "Identification" section by the text located under the name "SFT 2800". print To print the characteristics that have been read, click the "Print" control button. This command is only available after the user has stored the characteristics. The printing format is virtually the same as the display and storage formats. It also includes a cover page giving identification of the Sepam and the setting dates. Refer to the "print" chapter for more information on printing. cancel To close the characteristics display window, click on the "Cancel" control button or double-click on the system menu box. The SFT 2801 window then takes over again and the Sepam opening menu appears again in the display field. SFT Installation - Use A - D 14

operations on characteristics The Charact. item in the SFT 2801 menu bar gives access to various functions operating on the previously saved characteristics.

15 operations on characteristics The Charact. item in the SFT 2801 menu bar gives access to various functions operating on the previously saved characteristics. print This option may be used to print Sepam characteristics that have been previously recorded from the characteristics display window (cf chapter entitled "reading characteristics"). The print window appears in the centre of the screen, which lists the previously recorded Sepams. Select the Sepam that you want to print and click on the "Validate" button to start printing. A "Cancel" button may be used to return to the SFT 2801 graphical interface without printing. Refer to the chapter entitled "Printing" for more information on the printing procedure. save Sepam saving enables the user to transfer the information regarding the parameters of one or more Sepams, previously stored using the "Record" command (Cf "reading characteristics" chapt.), to any backup medium recognized by Windows (diskette or other).the save window is displayed in the centre of the screen. SFT Installation - Use A - D 15

operations on characteristics in the "From" field, select each of the Sepams that you wish to save. in the "To" field, select the destination medium and/or directory.

A list displays the Sepams that have already been saved in the selected backup directory (indicated in the "Directory" string), with the save dates.

16 operations on characteristics in the "From" field, select each of the Sepams that you wish to save. in the "To" field, select the destination medium and/or directory. If the desired directory is not found, you must create it. A list displays the Sepams that have already been saved in the selected backup directory (indicated in the "Directory" string), with the save dates. click on the "Validate" button to start the save operation. The "Cancel" button may be used to return to the SFT 2801 graphical interface without saving. restore Sepam restoring enables the user to transfer the information related to the parameters of one or more Sepams from a backup medium to the SFT The restore window is displayed in the centre of the screen. in the "From" field, select the restore source medium and/or directory, and then the Sepams to be restored (the current path to the source medium is indicated in the "Directory" string). SFT Installation - Use A - D 16

operations on characteristics in the "To" field, a list indicates the Sepams already included in the SFT 2801. click on the "Validate" button to begin restoring.

17 operations on characteristics in the "To" field, a list indicates the Sepams already included in the SFT click on the "Validate" button to begin restoring. The "Cancel" button may be used to return to the SFT 2801 graphical interface without restoring. delete This option is used to delete previously recorded information related to the characteristics of one or more Sepams, when that information is no longer of any use. The delete window appears in the centre of the screen. select the Sepams that you wish to delete, in the list of previously recorded Sepams. click on the "Validate" button to delete the characteristics of the selected Sepams. The "Cancel" button may be used to return to the SFT 2801 graphical interface. SFT Installation - Use A - D 17

18 disturbance records The Disturb. item in the SFT 2801 menu bar gives access to various functions operating on disturbance records. recover This choice is used to retrieve a disturbance record from the Sepam. The following window appears, which lists the available records : select the record that you want to read type in the name to identify the record that will be retrieved click on the "Validate" button to start reading The "Cancel" button may be used to return to the SFT 2801 graphical interface without reading. The SFT 2801 graphical interface becomes inactive and the following message is displayed : The disturbance record reading operation takes about 3 minutes. The operation may be interrupted at any time by clicking on the "Cancel" button or by pressing the "Return" key on the PC keyboard. When the operation is completed (or cancelled), the SFT 2801 window becomes active again, the dialog between the PC and Sepam is reinitialized and the Sepam opening menu appears again in the display field. SFT Installation - Use A - D 18

19 disturbance records save delete SFT 2826 This option may be used to transfer the previously retrieved disturbance record to any backup medium recognized by MS-DOS (diskette or other). It works the same way as the save option for Sepam characteristics. Please refer to the corresponding chapter. This option is used to delete previously retrieved disturbance records, when they are no longer of any use.it works the same way as the delete option for Sepam characteristics. Please refer to the corresponding chapter. To display the retrieved disturbance records, you may use the SFT 2826 application (or any COMTRADE compliant application). The disturbance record files are placed in the "\REG2000" subdirectory of the directory in which the SFT 2801 application has been installed. SFT Installation - Use A - D 19

20 application identification SFT 2801 software version When you select the? then About... option in the SFT 2801 menu bar, a window giving various items of information on the SFT 2801 software package is displayed. SFT Installation - Use A - D 20

21 printing introduction print Before printing, you must first check that Windows is set up correctly for the type of printing device to which your work station is connected. For further information, refer to the Windows User's Guide. Printing of Sepam characteristics is accessed from the parameter display window (Cf chapter entitled "reading parameters") or via the Print option in the Charact. menu bar item. The printed file is sent to the Windwos printer manager. error messages Different types of errors may occur during printing. In such a case, a message displays the type of error encountered, and printing is automatically interrupted. The main types of errors are the following : a general error related to the printer (printer not connected or not set up correctly, out of paper...). impossible to use printer. This error occurs when the print driver or output port, chosen via the Windows control panel, is incorrect. Refer to the Windows manual. out of disk space: temporary files are created by Windows, and the current disk unit must have sufficient space available for those files. SFT Installation - Use A - D 21

22 installing SFT 2801 general information The program is very simple to use and does not require any prior knowledge of your computer or computer technology. The program allows to install together or separately the SFT 2801 and SFT 2821 software. set-up The installation diskettes are common for these products. The minimum hardware set-up required to run the SFT2821 software is as follows: PC compatible microcomputer: Pentium type 133 MHz 32 Mb Ram (minimum) graphic display (EGA, VGA, Super VGA), minimum resolution 800 by 600 pixels, a 3"½ diskette drive (1.44 Mb) a hard disk (4 Mb available) an available RS232 communication port (COM1 or COM2) system: a printer (optional) starting the installation Windows 95 (version 708 or later version) or Windows 98 or Windows NT 4.0 version 1382 with pack 3 or later version and rights to modify Window NT system files. Insert diskette N 1 of the installation package in your disk drive. In the menu Start select Settings and then Control Panel. Select the Add/Remove Programs function. Click on the Install button in the form Install/Uninstall Follows the instruction from Windows to install the program from the installation diskette. SFT Installation - Use A - D 22

In this case Close all the applications and restart the installation. If the conflict is still present, then select the Ignore button on the window and continue the installation.

23 installing SFT 2801 installation start-up A start-up program will copy the files needed to run the SFT2801/SFT2821 installation program. It s important that all the Windows applications are closed during the installation process to avoid access conflicts to system files. By the way, if a conflict occurs, a message will appear. In this case Close all the applications and restart the installation. If the conflict is still present, then select the Ignore button on the window and continue the installation. It s also possible that the installaton requires the reboot of your system for the upgraded system files to be taken into account. In this case, perform the reboot and restart the installation from the beginning. canceling during installation It is possible to cancel the installation procedure at any time, in which case everything that has been created by the program (files, directory, icons, shortcuts, ) up to the cancellation is automatically deleted. SFT Installation - Use A - D 23

installing SFT 2801 start-up screen First of all, the screen asks the user to close the applications before continuing the installation of the SFT2801 software.

$he following screen is used to select the installation directory. The directory proposed by default is c:\program Files\Schneider\.$

24 installing SFT 2801 start-up screen First of all, the screen asks the user to close the applications before continuing the installation of the SFT2801 software. In this case, the user chooses "Exit installation". The installation procedure must be started over from the beginning. choosing the installation directory In addition, the screen may be used to choose the installation language, which will also be the default language of the SFT 2801 program. he following screen is used to select the installation directory. The directory proposed by default is c:\program Files\Schneider\. T The SFT2801 is installed in a SFT2801 directory which is created in this directory by default. With the "Change directory" button, it is possible to choose another default directory in which the SFT2801 directory will be created. If the default directory does not exist, it is created. SFT Installation - Use A - D 24

25 installing SFT 2801 choosing the program to be installed SFT2801 and SFT2821 may be installed at the same time or separately. If the SFT2821 software is selected as well, it is installed in the directory chosen in the previous screen, in an SFT2821 subdirectory. checking disk space At this stage of the installation, the software checks that the computer has enough disk space for the selected software to be installed. SFT Installation - Use A - D 25

According to the programs selected for the installation, one or two icons SFT2801 and SFT2821 are created in the

26 installing SFT 2801 choosing the group of programs This screen is sued to choose the group of programs that will be created in the Start / Programs menu. The choice proposed by default is Schneider. According to the programs selected for the installation, one or two icons SFT2801 and SFT2821 are created in the new group. copying files The program copies the files required for the chosen program or programs. SFT Installation - Use A - D 26

installing SFT 2801 The application may propose you to keep a file which is more recent on your disk than the version on diskette. In this case, it s recommended that you keep your existing file.

27 installing SFT 2801 The application may propose you to keep a file which is more recent on your disk than the version on diskette. In this case, it s recommended that you keep your existing file. In particular the SFT2801.INI file which contents the personalized settings of your program. end of installation Deinstallation The system files are then updated. The program icons are created. A message informs you that the software has been installed correctly. Before deinstalling the software, the user should check that the SFT2801 software is not running. To deinstall: in the Start menu, choose Settings and then Control Panel, click on Add /Delete program, go to the Install /Deinstall tab, select the software in the list to be deinstalled, click on add/delete, confirm deinstallation. Windows can only deinstall files that have been installed using the installation software. If you want the deinstallation tool to actually delete all the directories in the software, before starting deinstallation, you must manually delete all the files contained in SFT2801\reg2000 for the SFT2801 program. SFT Installation - Use A - D 27

28 appendix 1 SFT 2801 keys / keyboard equivalencies SFT 2801 keys PC keyboard F1 function key UP arrow key DOWN arrow key "9" number key "8" number key "7" number key "6" number key "5" number key "4" number key "3" number key "2" number key "1" number key "0" number key "." decimal point key F2 function key F3 function key "-" minus key "+" plus key F4 function key return key F5 Initialize F5 function key SFT Installation - Use A - D 28

29 appendix 2 example of Sepam 2000 parameter readout This example gives an idea of the format in which Sepam parameters are displayed, recorded or printed : IDENTIFICATION SFT 2800 : PROGRAM LOGIC : PROGRAM LOGIC VALDEMF ATC : DEPDISJ : program dated : SFT 2800 : : Central switchboard : 94/10/24 15:56 : model : Logipam : STATUS RATED FREQUENCY : PHASE TC RATIO : E/F SENSOR Fn = 50 Hz : In = 90 A : Ino = CT 30A : Ib = 90 A : : Number = I1-I2-I3 : MAX DEMAND INTERV. : VT RATIO : VT RATIO Interval= 10 mn : Number = 3U : Vnso = Uns/1.732 : Unp = 20 kv : : Uns = 100 V : POWER FLOW SENSE : JBUS COMMUNICATION : JBUS COMMUNICATION Type = Incomer : Speed = 9600 bauds : CPT2 = 0 : Address= 1 : CPT9 = 0 : Parity = Even : TIME TAGGING : TIME TAGGING : TIME TAGGING Synchro.=ETOR I21 : KTS 1-8= : KTS25-32= : KTS 9-16= : : KTS17-24= : TIME TAGGING : I1 -I2 = 00 : I11-I18= : I21-I28= : SFT Installation - Use A - D 29

30 appendix 2 example of Sepam 2000 parameter readout PROTECTIONS O/C F011 : O/L F012 : E/F F081 Curve = Definite : Curve = Definite : Curve = Definite Is = 500 A : Is = 600 A : Iso = 60 A T = 500 ms : T = 3 s : T = 1 s U/current F221 : O/V F281 : U/V F341 Is = 80 %Ib : Us = 16 kv : Us = 1.5 kv T = 5 s : T = 3 s : T = 2 s : : brdl F441 : Unbalance F451 : Unbalance F451 Is = 115 %Ib : Curve = Definite : Ii = 0.0 %Ib ST = 8 s : Is = 60 %Ib : LT = 2 s : T = 5 s : ndtf F421 : ndtf F421 : therm F431 N start= 999 : T = 500 ms : OL1 = 105 % H start= 5 : N.rest = 5 : OL2 = 120 % C start= 5 : : K = Average therm F431 : T1 = 5 mn : T2 = 5 mn : E = 0.0 % : SFT Installation - Use A - D 30

31 appendix 2 example of Sepam 2000 parameter readout PARAMETERS KP 1 = 1 KP 2 = 0 KP 3 = 0 KP 4 = 0 KP 5 = 0 KP 6 = 0 KP 7 = 0 KP 8 = 0 KP 9 = 0 KP 10 = 0 KP 11 = 0 KP 12 = 0 KP 13 = 0 KP 14 = 0 KP 15 = 0 KP 16 = 0 TIMERS T1 = 100 ms 0 : T21 = 100 ms 0 : T41 = 100 ms 0 T2 = 100 ms 0 : T22 = 100 ms 0 : T42 = 100 ms 0 T3 = 100 ms 0 : T23 = 200 ms 0 : T43 = 100 ms 0 T4 = 2 s 0 : T24 = 250 ms 0 : T44 = 250 ms 0 T5 = 250 ms 0 : T25 = 250 ms 0 : T45 = 250 ms 0 T6 = 250 ms 0 : T26 = 250 ms 0 : T46 = 250 ms 0 T7 = 1.2 s 0 : T27 = 1.2 s 0 : T47 = 1.2 s 0 T8 = 750 ms 0 : T28 = 1.2 s 0 : T48 = 750 ms 0 T9 = 1.2 s 0 : T29 = 2 s 0 : T49 = 100 ms 0 T10 = 100 ms 0 : T30 = 200 ms 0 : T50 = 200 ms 0 T11 = 200 ms 0 : T33 = 200 ms 0 : T51 = 200 ms 0 T12 = 200 ms 0 : T31 = 200 ms 0 : T52 = 200 ms 0 T13 = 200 ms 0 : T33 = 200 ms 0 : T53 = 200 ms 0 T14 = 200 ms 0 : T34 = 200 ms 0 : T54 = 200 ms 0 T15 = 200 ms 0 : T35 = 200 ms 0 : T55 = 200 ms 0 T16 = 200 ms 0 : T36 = 200 ms 0 : T56 = 200 ms 0 T17 = 200 ms 0 : T37 = 50 ms 0 : T57 = 200 ms 0 T18 = 200 ms 0 : T38 = 200 ms 0 : T58 = 200 ms 0 T19 = 200 ms 0 : T39 = 200 ms 0 : T59 = 200 ms 0 T20 = 200 ms 0 : T40 = 200 ms 0 : T60 = 200 ms 0 SFT Installation - Use A - D 31

SFT2821. Installation. Use. SFT Installation - Use EN-A0 1

SFT2821. Installation. Use. SFT Installation - Use EN-A0 1 SFT2821 Installation Use SFT2821 - Installation - Use 03144389EN-A0 1 contents Introduction 3 ACE 900 connection kit 7 Graphical interface 8 Commissioning 10 Managing setting files 12 Printing 15 Stopping