Optitex Installation Guide (For Administrators)

Transcription

1 Optitex Installation Guide (For Administrators)

2 Table of Contents Overview... 3 Optitex File Locations... 4 Optitex Full Installation... 6 Separate Installations... 6 Prerequisites... 7 User Preferences Settings and Customizations... 8 Installing Optitex Full Installation... 9 Installing a Network Server Activating Your License Configuring Remote Workstations The License Server The License Clients Managing and Controlling Your Licenses Advanced Nesting License Keys Installation Nest ++ Pro License Key Installation, Code Meter Nest ++ 2 License Key Installation, Sentinel Protection Installer Separate Installation Packages Installing CutPlan Installing Optitex Plugins Installing Runway Viewer Installing Optitex Viewer Uninstalling Optitex Silent Installations General Syntax for Silent Installations Installing a service pack (update) silently... 60

3 Overview This document outlines the installation and administration consideration of the Optitex desktop products listed below. It comes to serve as a guideline for enterprise installations, for both a standalone installation as well as one that is part of a wide deployment. This document is always updated to the latest released Optitex version; therefore, the process may be different if you are installing a previous version. Optitex recommends always using the latest version to ensure the best user experience possible. Note: Starting from version O/17, the full installation package now includes additional components that can be installed optionally during installation. See, Optitex Full Installation for more information. Proprietary information of EFI-Optitex

4 Optitex File Locations Optitex files are installed in two locations on your computer: The main Optitex folder, which includes all the installation files, including languages, default fabric, default palette, fonts, 3D Avatars, PDS/Maker samples and all Optitex utilities are installed in your C drive (located in Program Files, depending on the Optitex version you installed): Optitex 64Bit installation C:\Program Files\EFI-Optitex\Optitex 18 Optitex 32Bit installation C:\Program Files (x86)\ EFI-Optitex\Optitex 18 Proprietary information of EFI-Optitex

5 The second Optitex folder, which includes the content library, backup files, license files, configuration files (Optitex 18 INI) are installed in your C drive: Optitex 64Bit installation C:\Users\Public\EFI-Optitex\Optitex 18 Optitex 32Bit installation C:\Users\Public\EFI-Optitex\Optitex 18 Proprietary information of EFI-Optitex

6 Optitex Full Installation The following components are installed automatically when installing the Optitex Suite: Full Optitex (PDS/Marker/3D) Content Library (Seam and Stitch Library + Button Shapes) Fabric List Color Palettes Texture Library Avatars (all Avatars) Direct converters: Convert commonly used CAD system files directly to Optitex format, or export from Optitex to other formats Utilities License Manager HASP RUS Network license key update utility Select language Remote support utility (using Team Viewer) Optitex Shell: batch utility Output utilities: used to configure and manage plotting and cutting Outman OCC Runway Viewer Optitex Viewer The following components are included in the full Optitex installation, but are optional: Nesting Pack: Nesting algorithms + Drivers Team Viewer Step Reader Sample Pack: PDS files and Marker files Separate Installations Plugins CutPlan Network License Manager SDK Runway Viewer Optitex Viewer Proprietary information of EFI-Optitex

7 The Optitex installations of both the initial installation, as well as the service packs can be installed both attended and unattended. Refer to the Silent Installation section to learn more about silent installation switches. Prerequisites Before installing Optitex on your computer, first make sure your computer is compatible with Optitex. System Requirements Operating System Requirements Use the following guidelines to avoid installation issues: Download and unzip the installation files and have them ready. Don t plug-in your license keys before the installation. The installation package contains the license key drivers. Note: Older major versions may be left intact. You may use them for as long as needed before you remove them. Proprietary information of EFI-Optitex

8 User Preferences Settings and Customizations User preferences, settings and customizations are saved in the file system and in the registry. For example, changes made by the user to Tools > Preferences are written to the Optitex[version#].ini file. The windows folder containing this and more user generated files is: C:\Users\public\Efi-Optitex\Optitex 18 Proprietary information of EFI-Optitex

9 Installing Optitex Full Installation The Optitex full installation should be used for new main versions, when installing from scratch, or when you want to modify your installation files. The installation packages should also be downloaded. The full installation package should be executed using the EXE file (and not the MSI file). The Optitex installation requires the following Microsoft components: Microsoft.NET Framework Full Microsoft Visual C Redistributable Package (x64) Microsoft Visual C Redistributable Package (x64) Microsoft Visual C Update 3 Redistributable Package (x64) icrosoft Visual C Update 3 Redistributable Package (x86) If your system is missing one or more of these components, they will be installed prior to the Optitex package. Important: The available MSI installation file should only be used in command line installations. It does not supply the above Microsoft components. Installing the MSI on a system missing one or more of the prerequisites will result in a non-usable Optitex installation. To run the full Optitex installation: Run the extracted full installation package (recommended: right click and select Run as Administrator). The Optitex Installshield Wizard opens: If you are missing any requirements necessary for installation, a message appears specifying the missing prerequisites, click Install to proceed: Once you have all requirements, the Optitex installation automatically begins and the Welcome Screen appears: Proprietary information of EFI-Optitex

10 Click Next. Proprietary information of EFI-Optitex

11 The License Agreement dialog appears: Read the license agreement, then select the I accept the terms in the license agreement radio button. Click Next. The Customer Information dialog appears: Proprietary information of EFI-Optitex

12 Enter your personal information including your name, organization and . Note: You must enter personal information; otherwise you will not be able to move on to the next step. In the Install this application for area, select whether to install the application for anyone who uses this computer, or for the current user only. Click Next. The Destination Folder dialog appears: Proprietary information of EFI-Optitex

13 To set the installation folder to another location, click Change and set a different folder. Click Next to accept the default folder location, or to proceed after setting a different folder. The Custom Setup dialog appears: Proprietary information of EFI-Optitex

14 Select the required components: 1. Optitex Suite: Installs all Optitex Applications. Note: The Optitex Suite is always selected (mandatory). 2. Nesting Pack: Select only if you use Nest++2/NestPro (requires an Optitex license) 3. Team Viewer: (recommended) Allows you to get online support from Optitex when you need it. 4. Step Reader: Allows to read Rhino files (requires an Optitex license) 5. Sample Pack: Installs PDS/Marker sample files Note: If you need to add a component later (e.g. nesting pack, sample pack, etc.), you can run the same installation package again, chose Modify, and select the required component. If the component was already installed and you unselect it, the installed component will be removed. Click Next. The Application Layout Profile & Settings dialog appears. Here you can decide which type of profile you want to use when opening the PDS, and define if you want to copy your settings from the previous version. Note: You can always change the user profile via the Customization dialog in the PDS at a later date. 1. In the Layout Profile area, select one of the following options: Proprietary information of EFI-Optitex

15 Beginner Profile: This is recommended for new users and includes commonly used tools and options to get you started. (This is the default profile). Advanced Profile: This is recommended for advanced users and includes all the tools and options that are available in the PDS. 2. In the Settings area, select the Copy Settings from Previous Version checkbox, if you want to copy the default settings from the previous version which is installed on your machine. If you prefer using the Settings Manager tool (a separate application that allows you to specify the exact settings you want to copy), then you can download and install the Settings Manager Tool. For more information, see Settings Manager Tool. Click Next. Note: Due to a technical issue, if you want to copy your 3D settings from a previous version, it is recommended you use the Settings Manager tool instead of selecting this checkbox. You must first open the PDS (O/18), close and then run the Settings Manager tool. The Ready to Install the Program dialog appears: Click Install. The installation process starts: Proprietary information of EFI-Optitex

16 Once the installation is complete, the InstallShield Wizard Completed message appears: Click Finish. Proceed with one of the two: Proprietary information of EFI-Optitex

17 If Nesting Pack was not included in your Custom Setup, you are all set. Proceed with activating your license key (if required). For more information, see licensing guide. a) If Nesting Pack was included in your Custom Setup, the advanced nesting licensing driver installation is initiated. Proceed with installing the Code Meter (Nest ++ Pro), or Sentinel (Nest ++ 2) installations. See the next section for step by step instructions. Proprietary information of EFI-Optitex

18 Installing a Network Server This section describes how to install an Optitex licensing server and how to activate the software license. This installation is used when you want to only install the licensing components on a network server (and avoid the full Optitex installation) and point all the Optitex client machines to it for licensing (rather than dealing with a per client key). This installation supports the physical and virtual key for the licensing of Optitex 2D/3D products, as well as the server side installation for the nesting module. Note: The instructions in this section support version 15.5 and above (see details) To install a network server: Download the Optitex Network License Manager package. Unzip and then run the file named Optitex Network License Manager.exe Click Next to start the installation. Proprietary information of EFI-Optitex

19 Click the I accept the terms in the license agreement radio button. Click Next. Proprietary information of EFI-Optitex

20 Note: If you have nesting licenses you wish to provide from a server side, you can add the Code Meter driver in this step. Click Next Proprietary information of EFI-Optitex

21 Click Install to begin the installation. Once the installation is complete a message appears informing you the installation was successful: Click Finish. Proprietary information of EFI-Optitex

22 You can now activate your license. The Network files are installed in your computer: Activating Your License After installing the Optitex network license manager, you can proceed with activating your license. To proceed you must have either a product key string (provided by Optitex) or a physical key. To activate your license: If you are using a hardware (physical key), plug it into the USB port on your server. Run the License Manager: Proprietary information of EFI-Optitex

23 If you are installing a virtual (software) key for the first time, the following warning will pop up, you can ignore and continue with clicking OK The License Manager appears: Proprietary information of EFI-Optitex

24 If you are using a hardware (physical) key, you can skip to step 6. In the Software Key area, enter the Product Key string you received from Optitex as follows: Click Register Key. Proprietary information of EFI-Optitex

25 Once the key is registered, the following message appears: In the License area, click Online Activation as follows: Proprietary information of EFI-Optitex

26 A message appears informing you that the process may take some time: Click Ok to proceed. Once the installation is complete a message appears. Notice the product version, and modules are updated accordingly: Proprietary information of EFI-Optitex

27 Click Ok to close the License Manager. Configuring Remote Workstations Once you have installed and activated Optitex, you can now configure a remote workstation. This section contains advanced network licensing information and configuration. The License Server The license server is the computer available on the network, on which the network license key is installed. This computer distributes the licenses concurrently (at the same time) to the clients via the network, listening to the default port: The server can provide licenses following the license key activation, based on the number of concurrent (floating) licenses available on the key. The License Clients The clients need to have the Optitex software package installed. Proprietary information of EFI-Optitex

28 The clients get their licenses automatically as long as they are exposed to the license server via the network. In case the clients have a problem getting the license, because of subnets layout or for any other reason, they can be configured to access the server directly. The client gets an available license form the server. If all licenses are in use, the client will have to wait until a license is released. Managing and Controlling Your Licenses The Safenet environment provides a web-based interface to monitor, control and configure your licenses: The Sentinel Admin Control Center (ACC). This is installed by the Optitex package but can also be installed on its own. Using this interface, you can: Verify that your license key installation is intact. Verify the number of floating licenses. Configure network license server and clients. Monitor access and use of products, features and sessions. Control and end unneeded sessions. Apply license updates. And more Accessing the Sentinel Admin Control Center (ACC) The Sentinel Admin Control Center (ACC) can be accessed on the server or on the client. It can also be accessed remotely if configured to allow it. For more information, see The default communication port of the ACC is port Unless configured differently, use this port number to access the ACC. To open the ACC: Using any web browser, go to the URL: The ACC for the local machine opens: Proprietary information of EFI-Optitex

29 Select an option from the menu on the left to view/configure/monitor your licenses. More information can be found under Help. Pointing Clients Directly to the Server Whenever clients are experiencing difficulty reaching the license server, because of subnets layout or any other reason, it is recommended to point the licensing clients directly to the server. To designate a specific server: On the client open the ACC. From the Options menu, select Configuration. On the Configuration for Sentinel License Manager on [Computer_name] page, select the Access to Remote License Managers tab. Clear the Broadcast Search for Remote Licenses checkbox. Check the Aggressive Search for Remote Licenses checkbox. In the Specify Search Parameters box, enter the server computer name or IP address. If more than one server is available put each in a separate line. Proprietary information of EFI-Optitex

30 Applying One Client s Settings to Multiple Clients With a large-scale network licensing environment, it may be easier to configure one client successfully first and then apply the same settings to all the clients. This is done by using the hasplm.ini file. You can copy it from the previously configured client and replace the existing file for other clients. To configure multiple clients: On the successfully configured client go to: C:\Program Files [or Program Files (x86)]\common Files\Aladdin Shared\HASP In this folder, copy the hasplm.ini file. Replace this file in all clients using the same configuration. Note: A real time indication of the location of the hasplm.ini file can be found in the ACC Configuration page. You will find the path at the bottom of the page. Proprietary information of EFI-Optitex

31 Advanced Nesting License Keys Installation If Nesting Pack was included in your Custom Setup, Both Nest ++ pro and Nest ++ 2 license keys installation are initiated. Install only what you need: The Code Meter installation is for Nest ++ Pro. The Sentinel protection installer is for Nest Install both only if you have both nest ++ pro and nest ++ 2 license keys, otherwise, cancel and close what you don t need. Nest ++ Pro License Key Installation, Code Meter Note: Starting from O/15.5 you no longer need to install the Code Meter separately; it will be automatically installed silently if the Nesting Pack has been selected. It will be available several minutes after the installation completes. To install the Nest ++ Pro License: The CodeMeter Runtime Kit is initiated by the Optitex installation: Click Next The End-User License Agreement dialog appears: Proprietary information of EFI-Optitex

32 Read the license agreement, then select the I accept the terms in the License Agreement radio button. Click Next The Installation Scope dialog appears: Chose and select to install for all users or just for the current user and click Next. The Custom Setup dialog appears: Proprietary information of EFI-Optitex

33 Click Next. The Ready to install CodeMeter screen appears: Click Install. The Installation proceeds: Proprietary information of EFI-Optitex

34 Once the installation is complete: Click Finish. Your Nest ++ Pro key is ready to use, no activation is needed. Nest ++ 2 License Key Installation, Sentinel Protection Installer To install the Nest ++ 2 License: The Sentinel protection installer is initiated by the Optitex installation: Proprietary information of EFI-Optitex

35 Click Next. The License Agreement dialog box appears: Read the license agreement, then select the I accept the terms in the License Agreement radio button. Click Next. The Setup Type dialog appears: Proprietary information of EFI-Optitex

36 Click Next. The Ready to Install the Program dialog appears: Click Install. The Windows Firewall Detected! Note Appears: Proprietary information of EFI-Optitex

37 Click Yes. The installation proceeds: Once the installation is complete: Proprietary information of EFI-Optitex

38 Click Finish. Your Nest ++ 2 key is ready to use; no activation is needed. Proprietary information of EFI-Optitex

39 Separate Installation Packages CutPlan: (requires additional license key) Plugins These are extra addons (dll files) that can be added to the Optitex program Runway Viewer This is a viewer that allows you to view 3D PDS files without having to open them via Optitex. Optitex Viewer This is a viewer that allows you to open PDS file and view them, as well as view and plot MRK files. SDK Installing CutPlan CutPlan is a program that allows you to optimize your cutting operations. You need an additional key to work with the CutPlan. Please contact your Optitex representative for more information. To install CutPlan: Run the extracted CutPlan file. (recommended: right click and select Run as Administrator). The CutPlan InstallShield Wizard dialog appears and all the files are extracted to your machine: Once the files have been extracted, the CutPlan wizard appears: Proprietary information of EFI-Optitex

40 Click Next to begin the installation procedure. The License Agreement dialog appears. You must accept the terms and license agreement in order to continue installing. Proprietary information of EFI-Optitex

41 Select the I accept the terms in the license agreement radio button, then click Next. The Destination Folder dialog appears allowing you to define the location of the CutPlan s files: To change the file location, click Change otherwise click Next to continue. Proprietary information of EFI-Optitex

42 If you want install the Sentinel Driver or Code Meter Driver, select the appropriate checkboxes and then click Next Or Click Next to install the CutPlan program only. The system starts the installation process. You can see the progress of the installation in the Status area. Proprietary information of EFI-Optitex

43 Once the installtion is complete the InstallShield Wizard Completed dialog appears: Click Finish to close the wizard. Proprietary information of EFI-Optitex

44 The CutPlan files are installed in your computer (depending on the type of installation and designated folder): Installing Optitex Plugins Optitex offers a set of plugins that can be added to the software, for example marker viewer, ASTM converter, etc. These addons are dynamic according to the version you select; therefore, the 32bit includes different plugins than the 64bit. You can either install the 32bit or 64bit installation according to your Optitex installation. To install Optitex Plugins: Run the extracted Plugin file. (recommended: right click and select Run as Administrator). The spplugin InstallShield Wizard dialog appears and all the files are extracted to your computer. Proprietary information of EFI-Optitex

45 Click Next to start the installation procedure. Proprietary information of EFI-Optitex

46 The License Agreement dialog appears. You must accept the terms and license agreement in order to continue installing. Select the I accept the terms in the license agreement radio button, then click Next. Click Install to begin the installation: Proprietary information of EFI-Optitex

47 Once the installation is complete the InstallShield Wizard Completed dialog appears: Click Finish when you are done. Proprietary information of EFI-Optitex

48 All of the Plugins are added to your Plugins folder in your Optitex folder: (depending on your designated location for your Optitex files) Proprietary information of EFI-Optitex

49 Installing Runway Viewer The Runway Viewer is a separate application from the Optitex setup and can be downloaded and installed quickly by clicking on the download link. Once you install the Runway Viewer a desktop icon is created so you can easily access it. To install the Runway Viewer: Download the installation files. The Install Shield Wizard appears: Click Next to start installing. The License Agreement dialog appears. Proprietary information of EFI-Optitex

50 You must accept in order to continue with the installation. Click Next to continue. To change the destination folder where all the setup files will be saved, click Change; otherwise click Next. Proprietary information of EFI-Optitex

51 Click Install to start the installation. Wait for the features to be installed. Proprietary information of EFI-Optitex

52 Once the installation is complete you will be informed. Click Finish. Proprietary information of EFI-Optitex

53 The Runway Viewer files are installed in your Optitex folder (depending on your designated folder for your Optitex files) Proprietary information of EFI-Optitex

54 Installing Optitex Viewer Optitex Viewer enables you to view PDS files, and view and plot Marker files without an Optitex plug. You can either install the 32bit or 64bit installation according to your computer s operating system. To install the Optitex Viewer: Run the extracted Optitex Viewer file. (recommended: right click and select Run as Administrator). The Optitex Viewer InstallShield Wizard dialog appears and all the files are extracted to your computer. Click Next to begin the installation process: The License Agreement dialog appears. You must accept the terms and license agreement in order to continue installing. Proprietary information of EFI-Optitex

55 Select the I accept the terms in the license agreement radio button, then click Next. If you want to change the location where all the files are saved, click Change, otherwise click Next to continue. Proprietary information of EFI-Optitex

56 Click Install to start installing. The installation process begins. You can see the progress of the installation in the Status area. Once the installation is complete the InstallShield Wizard Completed dialog appears: Proprietary information of EFI-Optitex

57 Click Finish to close the wizard. Proprietary information of EFI-Optitex

58 The Optitex Viewer is installed in your Optitex folder (depending on the designated folder for all Optitex files) Proprietary information of EFI-Optitex

59 Uninstalling Optitex If you no longer want Optitex on your computer, you can easily remove it via the Control Panel. Uninstall to remove a main Optitex version. In the Windows Control panel, go to Programs and Features (or similar, depending on windows). The Uninstall or Change a Program dialog opens. From the Installed Versions list, select the Optitex version you want to uninstall. On the menu, select Uninstall. A confirmation message appears. Click Yes to proceed. Before the software is uninstalled completely an important message appears. Here you have to decide if you want to keep your user data, including configuration files, reg and licenses. If you click YES, the user data will not be removed. If you click NO, the user data will be removed. After you select an option, Optitex is removed from your computer and a successful message appears. Notes: Alternatively, you can select Uninstall Optitex [Version] in the Optitex group in the Start menu. Removing one version will not interfere with other installed versions. Some elements need to be removed manually. Proprietary information of EFI-Optitex

60 Silent Installations All Optitex installation packages support unattended installation via command line or other means by leveraging the MSI (Microsoft Software Installation) technology. Once the installation is complete desktop icons will appear along with the Optitex installation folder with all the appropriate files. Note: Unattended installations can be complex; therefore, it is recommended that a system administrator will be involved in setting up the installations. Before the Installation Verify that your system specifications are within the recommended system requirements. Check that all prerequisites are installed. Download and unzip the MSI file and have it ready. General Syntax for Silent Installations To install an Optitex product silently use the following syntax: msiexec /i <<path to file>> /qn Installing a service pack (update) silently Optitex services packs are based on the windows installer patch technology. It is possible to run a silent install of a patch using the following syntax: "path to SP" /s /v"/qn To install Optitex via MSI: Open CMD (run CMD as Administrator) Or Go to Run To run Optitex enter the following command line: msiexec /i "path to file" /qn To add the Nesting pack, enter the following command line: "msiexec /i "path to file" /qn NESTINGPACK_FEATURE=1". To add TeamViewer, enter the following command line: msiexec /i "path to file" TV_FEATURE=1 /qn Proprietary information of EFI-Optitex

61 To add the Optitex log file, enter the following command line /v"/l*v \"path_to_file.log\" To run the Service Pack, enter the following command line: "path to SP" /s /v"/qn To set the Sample pack, use the SAMPLEPACK_FEATURE switch. Set value 1 for including sample pack or 0 for not including. If not used, the default value is 1. for example: msiexec /i "path to file" /qn SAMPLEPACK_FEATURE=1 To set step reader, use STEPREADER_FEATURE switch. Set value 1 for including step reader or 0 for not including. If not used, the default value is 0. for example: msiexec /i "path to file" /qn STEPREADER_FEATURE =1 Note: This switch is relevant for x64 setup only. x86 does not include this switch. To set profile layout, use ProfileType switch. for basic profile: ProfileType=Basic for advanced profile: ProfileType=Advanced Note: If not used, the default value is Basic. Note: Run Msiexec /help for a list of the available parameters and options. Proprietary information of EFI-Optitex

62 Copyright by Optitex. All rights reserved. All text and figures included in this publication are the exclusive property of Optitex, and may not be copied, reproduced, or used in any way without the express permission in writing from Optitex. Information in this document is subject to change without notice and does not present a commitment on the part of Optitex.