PCF software version history

Size: px

Start display at page:

Download "PCF software version history"

Cori Briggs
5 years ago
Views:

1 The Version History of PCF and PrecisionSwirl Software is listed below. The software currently installed on a PCF or PrecisionSwirl system can be found by navigating to Advanced Setup Screen 3 or 4. Details on this screen can be found in Appendix A of the PCF or PrecisionSwirl instruction manual , 3A2098, 3A1935. All PCF systems with support for multiple fluid plates should match one of the following system versions. A separate document lists software history for PCF systems with support for just one fluid plate. If upgrade to newer software version is desired, order the appropriate Software Upgrade Token as listed below. This Upgrade Token is used to upgrade software on all of the system components per the procedure described in Maintenance section of PCF instruction manual or 3A2098 or PrecisionSwirl instruction manual 3A1935. SYSTEM VERSION Release Date: February 14, 2017 Software Upgrade Token: 16K743 Series Q o Advanced Display (P/N 24E451): 16K405 version o Fluid Plate: 16J873 version Fieldbus (CGM): 17P796 version Discrete (DGM): 16J872 version o Swirl Control (DGM): 16J872 version Change History: o Updated Fluid plate software to allow the PCF system to run fully integrated, without an ADM. o Updated ADM software to allow the PCF system to run fully integrated, without an ADM. o Updated CGM software to allow the CGM to handle a larger map. Also to allow PCF system to run fully integrated, without an ADM. SYSTEM VERSION Release Date: September 6, 2016 Software Upgrade Token: 16K743 Series P o Fluid Plate: 16J873 version Discrete (DGM): 16J872 version o Swirl Control (DGM): 16J872 version o Updated Fluid Plate software to allow a single job to run indefinitely without error.

2 o o Updated Fluid Plate software to improved performance in electrically environments that could cause flow meter errors. Updated Discrete Gateway software. The system will now send an error signal when communication with all other components is lost. SYSTEM VERSION Release Date: July 27, 2016 Software Upgrade Token: 16K743 Series M o Fluid Plate: 16J873 version o Updated Fluid Plate software to address issue where percent error could be consistently high after shot complete. SYSTEM VERSION Release Date: January 26, 2016 Software Upgrade Token: 16K743 Series L o Fluid Plate: 16J873 version o Updated Fluid Plate software to address issue where shot or purge dispenses could be interrupted before the job has been completed. This issue was introduced in system version SYSTEM VERSION Release Date: August 4, 2015 Software Upgrade Token: 16K743 Series K o Fluid Plate: 16J873 version

3 Change History o Updated Fluid Plate software to address possible communication issues when operating under certain conditions. SYSTEM VERSION Release Date: September 19, 2014 Software Upgrade Token: 16K743 Series J o Fluid Plate: 16J873 version o Improved software performance in electrically noisy environments that could cause communication errors. o Added USB log 7-AUTOMA.CSV. This log contains a recent history of the automation signals applied to PCF and can be interpreted by Graco Technical Assistance for troubleshooting. o Upon upgrading to this version of software, existing USB logged data may be SYSTEM VERSION Release Date: April 4, 2014 Software Upgrade Token: 16K743 Series H o Advanced Display (P/N 24E451): 16K405 version o Fluid Plate: 16J873 version Discrete (DGM): 16J872 version o Swirl Control (DGM): 16J872 version o Added option for DGM error bits to be active high or low. o Fixed issue related to entering parameters on Ethernet I/P setup screen. o Improved flow rate step-change response at low flow rates. SYSTEM VERSION Release Date: September 10, 2013 Software Upgrade Token: 16K743 Series G o Fluid Plate: 16J873 version

4 Discrete (DGM): 16J872 version o Swirl Control (DGM): 16J872 version Change History o Change made to fix issues with CGM Ethernet IP fieldbus renaming issues. SYSTEM VERSION Release Date: July 30, 2013 Software Upgrade Token: 16K743 Series F o Fluid Plate: 16J873 version Fieldbus (CGM): 15U193 version Discrete (DGM): 16J872 version o Swirl Control (DGM): 16J872 version o Fixed issue related to analog input signals that could cause communication errors. o Fixed issue related to the setting of the PROFINET station name. SYSTEM VERSION Release Date: June 22, 2012 Software Upgrade Token: 16K743 Series E o Fluid Plate: 16J873 version Fieldbus (CGM): 15U193 version Discrete (DGM): 16J872 version o Swirl Control (DGM): 16J872 version o Fixed issue with CGM software introduced in 15U193 version SYSTEM VERSION Release Date: June 11, 2012 Software Upgrade Token: 16K743 Series D o Fluid Plate: 16J873 version Fieldbus (CGM): 15U193 version Discrete (DGM): 16J872 version

5 o Swirl Control (DGM): 16J872 version Change History o Fixed issue related to multiple gun dynamic pre-charge for bead mode. o Decreased CGM latency. o Fixed % Error calculation in USB job log. o Added ability to disable dispensing through CGM command interface. SYSTEM VERSION Release Date: March, 26, 2012 Software Upgrade Token: 16K743 Series C o Advanced Display (P/N 24E451): 16K405 version o Fluid Plate: 16J873 version Fieldbus (CGM): 15U193 version Discrete (DGM): 16J872 version o Swirl Control (DGM): 16J872 version o Enhanced dispensing performance associated with Display pre-charge mode. o Improved algorithm for learning system characteristics when in bead mode. o Increased robustness of flow control algorithm when working with Coriolis flow meters. o Added option to password protect maintenance screen (manual dispensing) on ADM. o Upon upgrading to this version of software, existing USB logged data may be NOTE: This software update is only compatible with systems that contain a 24E451 ADM. This update is not intended for systems with ADMs. SYSTEM VERSION Release Date: January, 13, 2012 Software Upgrade Token: 16K743 Series B o Advanced Display (P/N 24E451): 16K405 version o Fluid Plate: 16J873 version Fieldbus (CGM): 15U193 version Discrete (DGM): 16J872 version o USB Configuration: 16J874 version o Swirl Control (DGM): 16J872 version o Enhanced dispensing performance. o Added new pre-charge modes. o Added Kp, Ki settings for bead control, Kd setting for pressure control. o Major software update. System now supports swirl functionality. PCF manual

6 o 3A2098 should be used for reference when token 16K743 is used to update software. Upon upgrading to this version of software, existing USB logged data may be NOTE: This software update is only compatible with systems that contain a 24E451 ADM. This update is not intended for systems with ADMs. SYSTEM VERSION Release Date: October 12, 2011 Software Upgrade Token: 16K743 Series A o Advanced Display (P/N 24E451): 16K405 version o Fluid Plate: 16J873 version Fieldbus (CGM): 15U193 version Discrete (DGM): 16J872 version o USB Configuration: 16J874 version o Major software update. System now supports multiple fluid plates. PCF manual 3A2098 should be used for reference when token 16K743 is used to update software. o Upon upgrading to this version of software, existing USB logged data will be NOTE: This software update is only compatible with systems that contain a 24E451 ADM. This update is not intended for systems with ADMs. See instruction manual for complete details on the PCF system. The latest revision manual can be found at

PR70 Revision History, PR70_RevHistoryPKE.docx, February 16, 2017, Page 1 of 5

PR70 Revision History, PR70_RevHistoryPKE.docx, February 16, 2017, Page 1 of 5 The Version History of the PR70 Software is listed below. The software currently installed on the PR70 can be found by navigating to the setup system screen of the ADM or the maintenance screen on a standard