START GUIDE FEATURES:

Transcription

1 VT-TNR Series Transcendent Series 4, 8, 16, 32, and 64 Channel 8 MegaPixel H.265 Real Time Network Video Recorders with 4K HDMI Output QUICK START GUIDE FEATURES: 4, 8, 16, 32, and 64 Channel Stand-alone Real-time IP Network Video Recorders Full 8 Megapixel Real-time recording & playback 4K HDMI & VGA Video Outputs H.265 / H.264 Video Compression Plug and Play & Auto configuration for many leading ONVIF compliant IP Camera models Internal PoE Switch (VT-TNR414P, VT-TNR818P, VT-TNR1616P, and VT-TNR3216P) 1 Gigabit LAN / Dual 1 Gigabit LAN (VT-TNR6480) Pentaplex: Live Display / Record / Playback / Backup / Remote Access Supports SATA2/SATA3 HDD Applications for ios & Android Remote Viewing over the Internet via Web Browser or LAN Mac OS Client & CMS Central Management Software Included Supports both Dynamic and Static IP Addresses Web-based remote configuration Control locally via Front Panel Controls, USB Mouse, or with the Included IR Remote control PLEASE NOTE: Complete User Guide, Software, Tools, and Updates are available online. Scan the QR Code or visit:

2 SETUP & CONFIGURATION: 1. Notes Please read this instruction carefully for correct use of the product and preserve it for reference purposes. This manual is suitable for 4/8/16/32/64 CH Network Video Recorder. All the examples and pictures used here are for reference only. There may be several technically incorrect places or printing errors in this manual. The updates will be added into the new version of this manual. The contents of this manual are subject to change without notice. To prevent electric shocks and risk of fire hazards, only use the power source that Vitek provided with your NVR. 2. Check Package Contents Please confirm that the device and all accessories are included in the package. If there is any damage, shortages or defects, please contact your dealer immediately. 1) Transcendent Series NVR 2) IR Remote Control 3) Quick Start Guide 4) Power Supply 3. Rear Panel Connections VT-TNR414P Rear Panel Connections VT-TNR818P Rear Panel Connections VT-TNR1616P Rear Panel Connections VT-TNR3216P Rear Panel Connections VT-TNR6480 Rear Panel Connections 5) Rack Ears (32 & 64 Channel Models) 6) HDD Screws 7) SATA Cables 8) USB Mouse

3 4. System Startup Please make sure all the connections are done properly before you power on the unit. Proper startup and shutdown are crucial to expending the life of your device Startup: Connect the output display device to the VGA/HDMI interface of the NVR. Connect the mouse and power. The device will boot and the power LED will turn blue. A WIZARD window will pop up (you should select the display language the first time you use the NVR). Refer to 3.1 Startup Wizard for details. Click Wizard Setup to start wizard. The setting steps are as follows. System Login: Set your own password or use the default when you use the wizard for the first time (the default username of the system is admin and the default password of admin is ); select the login username and enter the corresponding password next time. Click Edit Security Question to set questions and answers for password security of admin. If you forget the password, please refer to Q4 in Appendix A FAQ for details. Click Next to continue or click Cancel to exit the wizard.

4 Date and Time Configuration: The date and time of the system needs to be set up if you use the wizard for the first time. Refer to the following figure. Set the time zone, system time, date format and time format. The DST will be enabled by default if the time zone selected includes DST. Click Next to continue. Network Settings: Check Obtain an IP address automatically and Obtain DNS automatically to get the IP address and DNS automatically (the DHCP function of the router in the same LAN should also be enabled), or manually input them. Input the HTTP port, RTSP port and Server port (please see Port Configuration for details). Click Next to continue. Note: If you use the NVR with the PoE network ports, the online state of the internal Ethernet port will be shown on the interface. Refer to the picture below. Please refer to TCP/IPv4 Configuration for detail introduction of the internal Ethernet port.

5 QRCode: You can scan the QRCode through the mobile client which is installed on a mobile phone or Tablet to log into the mobile client instantly. Please refer to 12.1 Mobile Client Surveillance for details. Add Camera: Click Refresh to refresh the list of online IP cameras which are in the same local network with NVR and then click to add the searched camera. Click Add All to add all the cameras in the list. Click to delete the added camera. Click Delete All to delete all the added cameras.

6 Click to edit the found IP camera as shown on the below left. Input the new IP address, subnet mask, gateway, username and the password of the camera. Click OK to save the settings. Click to edit the added camera as shown on the above right. Input the new camera name, IP address, port, username and the password of the camera. You can click Test to test the effectiveness of the input information. Click OK to save the settings. You can change the IP camera name only when the added camera is online. Click Next to continue.

7 Disk Settings: You can view the disk number, disk capacity of the NVR and serial number, R&W status of the disk. Click Formatting to format the disk. Click Next to continue

8 Record Settings: Two record modes are available: Auto and Manual. Auto: Select one auto mode in the interface as shown below and then click OK button to save the settings. See Mode Configuration for details CONSTELLATION ROAD VALENCIA, CA Version 3.0 May 2018