2 Bosch Rexroth AG Electric Drives and Controls Documentation 4 inputs, M12 Thermocouples (TC) M12 Technical data S67-AI4-UTH-M12 Local bus interface Designation System bus M12 connector, B-coded, 5-pin, shielded Supply for module electronics M12 connector, A-coded, 4-pin Power supply logic and sensors U LS 24 V DC Power actuators U A 24 V DC Current consumption of U LS Typ. 45 ma + sensors (max. 400 ma) Current consumption of U A 5 ma Protective circuit Reverse polarity protection for ULS + UA, short-circuit protection for sensor supply Analog inputs Connection technology of the sensors 2-wire connection Number 4 M12 connector, A-coded, 5-pin Characteristics Measurement resolution 16 Bit Process data-update < 480 ms s Compatible sensor types B, C, E, J, K, L, N, R, S, T, optional as PT1000 resistor (cold junction) Load Vibration resistance Acc. to IEC 60068-2-6 Shock resistance Acc. to IEC 60068-2-27 Norms and Standards Certification UL 508 Environmental conditions Permissible temperature (operation) -25... +60 C Permissible humidity (operation) 5 to 95%, no dewing Permissible air pressure (operation) 795 to 1080 hpa
Electric Drives and Controls Bosch Rexroth AG 3 Protection category IP67 Dimensions S67-AI4-UTH-M12 Dimensions Height H [mm] 117 Width B [mm] 35 Length T [mm] 50 Ordering information S67-AI4-UTH-M12 R911172411 Accessories SUP-E01-S67-UTH-M12 Compensating connector R911173244 Cable local bus RKB0041/000,2 Standard system bus cable, M12 socket, M12 plug, length: 0.2 m R911171990 RKB0041/000,3 Standard system bus cable, M12 socket, M12 plug, length: 0.3 m R911171991 RKB0041/000,5 Standard system bus cable, M12 socket, M12 plug, length: 0.5 m R911171992 RKB0041/001,0 Standard system bus cable, M12 socket, M12 plug, length: 1.0 m R911171993 RKB0041/002,0 Standard system bus cable, M12 socket, M12 plug, length: 2.0 m R911171994 RKB0041/005,0 Standard system bus cable, M12 socket, M12 plug, length: 5.0 m R911171995 RKB0041/010,0 Standard system bus cable, M12 socket, M12 plug, length: 10.0 m R911171996 RKB0041/xxx,x Standard system bus cable, M12 socket, M12 plug, variable length R911172579 RKB0049/xxx,x System bus cable, M12 socket, M12 plug, variable length, suitable as trailing R911172581 cable RBS0020 System bus termination, connector B-coded R911171998 Cable supply RKB0046/000,2 - length: 0.2 m R911172102
4 Bosch Rexroth AG Electric Drives and Controls RKB0046/000,3 RKB0046/000,5 RKB0046/001,0 RKB0046/002,0 RKB0046/005,0 RKB0046/010,0 RKB0046/xxx,x RKB0047/005,0 RKB0047/010,0 - length: 0.3 m - length: 0.5 m - length: 1.0 m - length: 2.0 m - length: 5.0 m - length: 10.0 m - M12 socket, straight, A-coded, variable length, suitable as trailing cable Voltage cable, unshielded, 4-pin, 0.75 mm2, PUR, M12 socket, straight, A-coded, open line end, suitable as trailing cable - length: 5.0 m Voltage cable, unshielded, 4-pin, 0.75 mm2, PUR, M12 socket, straight, A-coded, open line end, suitable as trailing cable length: 10.0 m R911172103 R911172104 R911172105 R911172106 R911172107 R911172108 R911172580 R911172100 R911172101 Mounting SUP-M01-S67-0002 Carrier rail adapter for I/O module R911172120 SUP-M01-S67-0004 Profile adapter for I/O module R911172122 SUP-M01-S67-0005 Spacer R911172123 SUP-M01-ENDHALTER Snap-on end bracket, standard mounting rail 35 mm, width: 9.5 mm R911170685 SUP-M01-ENDHALTER/AL End bracket, aluminum, DIN mounting rail 35 mm, width:10 mm R911171035 SUP-M01-ENDHALTER/PA End bracket, polyamide, DIN mounting rail 35 mm, width: 9.5 mm R911172352 Protection and sealing elements RF-PROT-M8 M8 cover for unused inputs/outputs R911170895 SUP-M01-SM*12.1 M12 cover for unused inputs/outputs R911277260 RF-PROT-M12-M M12 cover for unused connectors R911171999 Marking SUP-M01-S67-0007 Marking strips for I/O modules (4x M12), packaging unit = 10 R911172125
Bosch Rexroth AG Postfach 13 57 97803 Lohr, Germany Bgm.-Dr.-Nebel-Str. 2 97816 Lohr, Germany Tel. +49 9352 18-0 Fax +49 9352 18-8400 www.boschrexroth.com/electrics Local contact information can be found at: www.boschrexroth.com/adressen Bosch Rexroth AG 2012 Subject to modification. Printed in Germany The data specified above only serve to describe the product. As our products are constantly being further developed, no statements concerning a certain condition or suitability for a certain application can be derived from our information. The information given does not release the user from the obligation of own judgment and verification. It must be remembered that our products are subject to a natural process of wear and aging.