2D DESIGNER Version 2002 Installation Guide Copyright 2002, PRO-CAD Software Ltd. The contents of this document are the property of PRO-CAD Software Ltd., and are subject to change without notice. No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language, without the written permission of PRO-CAD Software Ltd. PRO-CAD Software Ltd. 300, 37 Richard Way SW Calgary, Alberta Canada, T3E 7M8 www.procad-software.com
Registered Trademarks This manual makes reference to the following products. These products are registered trademarks of their manufacturers: AutoCAD is a registered trademark of Autodesk Inc. Windows is a registered trademark of Microsoft Corporation Pentium is a registered trademark of Intel Corporation AutoORTHO 1992-2002 by PRO-CAD Software Ltd. AutoISO 1993-2002 by PRO-CAD Software Ltd. AutoELECTRIC 1993-2002 by PRO-CAD Software Ltd. AutoFLOW 1990-2002 by PRO-CAD Software Ltd. AutoDATA 1994-2002 by PRO-CAD Software Ltd. Weldolet, Thredolet, Sockolet, and Elbolet, are registered trademarks of Bonney Forge 2D DESIGNER is a trademark of PRO-CAD Software Ltd.
Table of Contents Before You Begin...1 System Requirements... 1 CD Contents... 1 Installation Overview... 1 Choose an Installation Path... 2 Installing 2D DESIGNER...5 Dialog 1: Autorun... 5 Dialog 2: Welcome... 6 Dialog 3: Agreement... 6 Dialog 4: License Options... 7 Dialog 5: CrypKey License Options... 8 Dialog 6: Choose Network Folder... 9 Dialog 7: Choose Destination... 9 Dialog 8: Main Applications... 11 Dialog 9: AutoDATA Applications... 12 Dialog 10: Review Settings... 13 Copy Files... 13 Dialog 11: CrypKey Manager... 14 Dialog 12: Finished... 16 Entering Site Keys...17 Technical Information...19 AutoCAD Profiles... 19 Program Directories... 19 Trouble Shooting...21 Environment Variables Warning... 21
Before You Begin 2D DESIGNER V2002 Installation Guide Before You Begin System Requirements 2D DESIGNER Version 2002 requires the following system configuration: Pentium (or higher) based PC CD-ROM drive Approximately 20-25 MB of hard disk space per application for Standalone and Network Server installations. 32 MB of RAM Windows 98/ME/NT 4.0(SP3 or higher)/2000/xp AutoCAD 2000, 2000i, or 2002 CD Contents Purchased Software and Evaluation Modules The 2D DESIGNER installation CD contains a full version of the software you purchase. In addition, each CD contains evaluation versions of all other 2D DESIGNER products. You may install one or more of the evaluation modules as required. Documentation The installation CD contains PDF copies of all 2D DESIGNER manuals. All documentation files are located in the Manuals folder. Installation Overview There are two steps to installing 2D DESIGNER: Installing a licensing system Installing 2D DESIGNER applications If you use CrypKey Software Licensing, you must perform one additional step: entering site keys. Page 1
Before You Begin License Installation Options 2D DESIGNER does not function fully unless it is properly licensed. There are three options for installing licensing: Install 2D DESIGNER applications and CrypKey Software License Manager on the same computer Install 2D DESIGNER applications and CrypKey Software License Manager on separate but networked computers (including network installations) Install 2D DESIGNER applications with a Rainbow Hardware Key If you do not purchase Rainbow Hardware or CrypKey Software Licensing options, you can install and run any 2D DESIGNER application in evaluation mode. Choose an Installation Path 2D DESIGNER installation follows different paths, depending on your goals and licensing choice. For each installation path, different dialog boxes may appear. Use the chart below to determine which installation path to follow. Installation Type Description Dialog Boxes You Will See Standalone User, CrypKey Software license Network Administrator, CrypKey Software license Network User, CrypKey license Install 2D DESIGNER on a standalone system using the CrypKey Software licensing option Install the CrypKey Software license only on a network Install 2D DESIGNER applications after the Network Administrator has installed the CrypKey Software license in a network folder 1, 2, 3, 4, 5, 7, 8, 9, 10, Copy Files 10, 11 1, 2, 3, 4, 5, 7, 10, Copy Files, 11, 12 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, Copy Files, 12 Standalone User, Rainbow Hardware license Evaluation Only Applications Only Install 2D DESIGNER using a Rainbow Hardware key Install 2D DESIGNER applications in evaluation mode only Install or re-install 2D DESIGNER applications only without licensing (licensing has already been installed) 1, 2, 3, 4, 7, 8, 9, 10, Copy Files, 12 1, 2, 3, 4, 7, 8, 10, Copy Files, 12 1, 2, 3, 4, 7, 8, 9, 10, Copy Files, 12 Page 2
Installation Process Map 2D DESIGNER V2002 Installation Guide Before You Begin The following diagram shows the overall flow of the dialog boxes that appear during the installation process. Dialog 1: Autorun Appears for all installation paths Go to Dialog 2 Dialog 2: Welcome Appears for all installation paths Go to Dialog 3 Dialog 3: Agreement Appears for all installation paths Go to Dialog 4 Dialog 4: License Options CrypKey Software: Go to Dialog 5 Rainbow Hardware: Go to Dialog 7 Evaluation: Go to Dialog 7 Applications Only: Go to Dialog 7 Dialog 5: CrypKey Options Standalone User: Install CrypKey Software license and applications; Go to Dialog 7 Network Administrator: Install CrypKey Software license only; Go to Dialog 7 Network User: CrypKey Software license exists on another computer; Go to Dialog 6 Dialog 6: Choose Network Folder Appears for Network User installation only Go to Dialog 7 Dialog 8: Main Applications Licensed install: Go to Dialog 9 Evaluation only install: Go to Dialog 10 (This Dialog does not appear for Network Admin installation) Dialog 9: AutoDATA Applications Select AutoDATA applications Go to Dialog 10 Dialog 10: Review Settings Appears for all installation paths Go to Copy Files Copy Files Standalone User and Network Administrator: Go to Dialog 11 All other installs: Go to Dialog 12 Dialog 11: CrypKey Manager Appears for Standalone and Network Administrator installations only Generate a Site Code Go to Dialog 12 Dialog 12: Finished Appears for all installation paths Installation complete Dialog 7: Choose Destination Appears for all installation paths Network Administrator: Go to Dialog 10 All other installs: Go to Dialog 8 Page 3
Installing 2D DESIGNER Installing 2D DESIGNER Always install CrypKey Software License Manager (or Rainbow Hardware key drivers) before you attempt to install application modules. Dialog 1: Autorun Insert the installation CD into your CD drive. The 2D DESIGNER V2002 Autorun dialog box appears. Installation Path All installation paths Action Click Install Go to Dialog 2: Welcome Page 5
Installing 2D DESIGNER Dialog 2: Welcome Installation Path All installation paths Action Click Next Go to Dialog 3: Agreement Dialog 3: Agreement Page 6 Installation Path All installation paths Action Click Yes Go to Dialog 4: License Options
Installing 2D DESIGNER Other options Click No to exit the installation process Click Back to return to the Welcome dialog box Dialog 4: License Options Installation Path Standalone User, CrypKey Software license Network Administrator, CrypKey Software license Network User, CrypKey Software license Standalone User, Rainbow Hardware license Evaluation Only Applications Only Action Click CrypKey Software License Go to Dialog 5: CrypKey License Options Click CrypKey Software License Go to Dialog 5: CrypKey License Options Click CrypKey Software License Go to Dialog 5: CrypKey License Options Click Rainbow Hardware Key Go to Dialog 7: Choose Destination Click Evaluation Mode Go to Dialog 7: Choose Destination Click Licensing is Already Installed Go to Dialog 7: Choose Destination Page 7
Installing 2D DESIGNER Dialog 5: CrypKey License Options Installation Path Standalone User Network Administrator Network User Action Click Install Licensing AND applications on this computer Go to Dialog 7: Choose Destination Click Install Licensing ONLY on this computer Go to Dialog 7: Choose Desintation Click Licenses are installed on another computer Go to Dialog 6: Choose Network Folder Note to Network Administrators: After installing the CrypKey License, use the Network User installation path to install 2D DESIGNER applications. Page 8
Installing 2D DESIGNER Dialog 6: Choose Network Folder Installation Path Network User Action From the Drives and Directories lists, select the folder where the Network Administrator installed the CrypKey Software license folder Go to Dialog 7: Choose Destination Dialog 7: Choose Destination Page 9
Installing 2D DESIGNER Installation Path All installation paths Network Administrator All other installs Action Verify the Destination Folder location is correct Click Next Go to Dialog 10: Review Settings Go to Dialog 8: Main Applications Notes: If the Destination Folder is not correct, click Browse and select the drive and folder location where the other 2D DESIGNER applications are/will be installed. Note to Network Administrators: When installing on a network, ensure all 2D DESIGNER application users can access the licenses folder located at [drive + directory]\2d Designer V2002\CrypKey Server\Licenses. Page 10
Installing 2D DESIGNER Dialog 8: Main Applications Installation Path All licensed installs Evaluation Only Action Click the box beside the applications you want to install; use the scroll bar to view all applications Click Next Go to Dialog 9: AutoData Applications Click the box beside the applications you want to install; use the scroll bar to view all applications Click Next Go to Dialog 10: Review Settings Notes: This dialog does not appear for the Network Administrator installation path. Page 11
Installing 2D DESIGNER Dialog 9: AutoDATA Applications Installation Path Licensed installs Action Click the box beside the AutoDATA applications you want to install Click Next Go to Dialog 10: Review Settings Notes: This dialog does not appear for Network Administrator CrypKey Software license install, or for Evaluation installations. Page 12
Installing 2D DESIGNER Dialog 10: Review Settings Installation Path All installs Action Verify that the licensing, location, and feature options are correct Click Next Go to Copy Files Copy Files The installer begins to copy files from the CD to your system. Once the installer copies the files to your system, go to the next dialog box as indicated below: Installation Path Standalone User Network Administrator All other installs Action Go to Dialog 11: CrypKey Manager Go to Dialog 11: CrypKey Manager Go to Dialog 12: Finished Page 13
Installing 2D DESIGNER Dialog 11: CrypKey Manager Installation Path Standalone User; Network Administrator Action Follow the procedure below: Generate a Site Code Go to Dialog 12: Finished Generate a Site Code 1. In the Applications list, click the application you want to install. A system generated Site Code appears in the Site Code box. This code is a unique numerical identifier for your computer. 2. Copy the displayed Site Code into an email message. If you do not have email, manually record the Site Code number. 3. Repeat Steps 1 and 2 for each application you want to install. 4. Enter the sites code(s) and the following information in an email addressed to: support@procad-software.com Include the following information: Your Name Your Company (if applicable) Street Address City Province or Sate Postal or Zip code Country Phone Number Your email address Name of application(s) you want to license Number of licenses required for each application If you do not have email, provide the requested information by phone using the phone numbers listed in the next step. Page 14
Installing 2D DESIGNER 5. If you have not already done so, provide PRO-CAD with payment or credit card information. Do not send credit card information by e-mail. Contact PRO-CAD Software Ltd. at: 1-403-216-3375 or 1-888-477-6223. We will email you a Site Key to unlock the requested application(s) after we verify payment. 6. Click OK to exit the CrypKey License Manager dialog box. Page 15
Installing 2D DESIGNER Dialog 12: Finished Installation Path All installation paths Action Click Finish If a dialog appears that lets you choose whether or not to restart your computer, select the Yes, I want to restart my computer now option. Note to Network Administrator: Ensure that 2D DESIGNER application users have read and write privileges for the license folder at [drive + directory]\2d Designer V2002\CrypKey Server\Licenses. Page 16
Entering Site Keys 2D DESIGNER V2002 Installation Guide Entering Site Keys You cannot enter Site Key(s) or initialise 2D DESIGNER applications until you do the following: Install the CrypKey License Manager and send Site Code(s) to PRO-CAD Install the 2D DESIGNER application(s) Receive Site Key(s) from PRO-CAD Entering Site Keys To enter site keys 1. Open CrypKey License Manager, located in [drive + directory]\procad\2d DESIGNER V2002. The CrypKey License Manager dialog box appears. 2. In the Applications list, click the application for which you received a Site Key. 3. In the Site Key field, do one of the following: Type the site key you received from PRO-CAD. Copy the site key from the PRO-CAD email and paste it into the field using the Paste button to the right of the Site Key field. 4. Click the Save button to the right of the Site Key field. Your license, options, and duration update to reflect the new license arrangement. 5. Repeat Steps 2-4 for each application for which you have a site key. Page 17
2D DESIGNER Installation Guide Entering Site Keys 6. When you are finished, click OK to close the CrypKey License Manager dialog box. Initializing the Software To initialize the software This procedure is required the first time you open a 2D DESIGNER application. 1. Open the required 2D DESIGNER application. The Browse for Folder dialog box appears. 2. Select the network path to the license folder. 3. Click OK. If the licenses move, or if you need to change this network path, you can access this dialog box from within any 2D DESIGNER application. From the Configure System tab, click Select License folder. Page 18
Technical Information Technical Information AutoCAD Profiles 2D DESIGNER creates the following profiles: 2D DESIGNER V2002 AutoXXX Program Directories The set-up program creates the following directories in the destination drive. Directory Main AutoXXX application files AutoDATA files Border drawing files Temp files Spec files ANSI standards files Path [drive + directory]\procad\2d DESIGNER V2002 [drive + directory]\procad\2d DESIGNER V2002\AutoXXX [drive + directory]\procad\2d DESIGNER V2002\AutoDATA for XXX [drive + directory]\procad\2d DESIGNER V2002\Borders [drive + directory]\procad\2d DESIGNER V2002\Temp [drive + directory]\procad\2d DESIGNER V2002\Specs\A to F [drive + directory]\procad\2d DESIGNER V2002\Standards\ANSI Page 19
Trouble Shooting 2D DESIGNER V2002 Installation Guide Trouble Shooting Environment Variables Warning Use this procedure if the Launch 2D DESIGNER V2002 warning appears. 1. Click OK. 2. From your desktop, right-click the My Computer icon. 3. Select Properties. The System Properties dialog box appears. 4. Click the Advanced tab. 5. In the Environment Variables pane, click Environment Variables 6. Under the System Variables pane, click New. The New System Variable dialog box appears. 7. In the Variable Name box, type 2DDSGNR2002. 8. In the Variable Value box, type x:\programs\procad\2d DESIGNER V2002 9. Click OK. Note: Replace x with the correct drive name. 10. Repeat Steps 6-9 using the following: Variable Name: 2DDSGNR2002TEMP Variable Value: x:\programs\procad\2d DESIGNER\TEMP Page 21
2D DESIGNER Installation Guide Trouble Shooting 11. Click OK to exit the Environment Variables dialog box. 12. Click OK to exit the System Properties dialog box. Page 22