TOYOTA YARIS SEDAN/HB 2009- IPOD INTERFACE Part Number: 00016-00115 Accessory Code: RI3 Kit Contents Item # Quantity Reqd. Description 1 1 Digital interface box 2 1 Cable A 3 1 Cable B 4 1 Cable C 5 1 Hardware bag 6 7 8 Color Applicability/Trim Level Accessory Color Vehicle/Trim Color Hardware Bag Contents Item # Quantity Reqd. Description 1 6 Wire ties 2 3 4 5 6 7 8 Additional Items Required For Installation Item # Quantity Reqd. Description 1 1 Conflicts Note: I-Pod Shuffle Recommended Tools Safety Tools General Applicability Recommended Sequence of Application Item # Accessory 1 2 3 *Mandatory Special Tools Installation Tools Nylon tool Screw Gun Phillips head #2 Extension 6 Sockets 10mm Drill bit ¼ Torque wrench 4.1 N-m ( 36 in-lbs ) Special Chemicals SPECIAL NOTE: After TMS and Safety mandated preparatory steps have been taken, the installation sequence is the suggested method for completing the accessory installation. In some instances the suggested sequence is written for one associate to install and in others the sequence is given as part of a team accessory installation. Unless otherwise stated in the document, the associates may perform the installation steps in any order to make the installation as efficient as possible while maintaining consistent quality. Southeast Toyota Distributors, LLC Page 1 of 9
TOYOTA YARIS SEDAN/HATCHBACK I-POD INTERFACE Care must be taken when installing this accessory to ensure damage does not occur to the vehicle. The installation of this accessory should follow approved guidelines to ensure a quality installation. These guidelines can be found in the Accessory Installation Practices document. This document covers such items as: Vehicle protection (use of covers and blankets, cleaning chemicals, etc.). Safety (eye protection, rechecking torque procedure, etc.). Vehicle disassembly/reassembly (panel removal, part storage, etc.). Electrical component disassembly/reassembly (battery disconnection, connector removal, etc.). 1. Vehicle Disassembly. (a) Use the 10 mm wrench to remove the negative battery cable. (b) For vehicles equipped with automatic transmission, place the shifter in the N (neutral) position and set the parking brake prior to disconnecting the battery. (c) Do not touch the positive terminal with any tool when removing cable. Negative cable NOTE: FOR SEDAN MOLELS ONLY: Steps 2 through 5. For Hatchback see steps 6 through 9. 2. Remove center cluster under panel, then remove the center side panel. See fig 1-2. Southeast Toyota Distributors, LLC Page 2 of 9
3. Remove the meter cluster. See fig 1-3. 4. Remove center cluster panel. See fig 1-4. 5. Remove four screws, pull out radio and disconnect all connectors. See fig 1-5 Fig 1-5 YARIS HATCHBACK 6. Remove center cluster side panel, then remove the center side panel. See fig 1-6. FIG 1-6 Southeast Toyota Distributors, LLC Page 3 of 9
7. Remove the meter cluster. See fig 1-7. FIG 1-7 8. Remove center cluster panel. See fig. 1-8. FIG 1-8 9. Remove four screws, pull out radio and disconnect all connectors. See fig 1-9 FIG 1-9 Southeast Toyota Distributors, LLC Page 4 of 9
TOYOTA YARIS IPOD INTERFACE 10. Plug C Cable (small Male End ) to the back of radio and connect C Cable ( Small Female End ) to the CD Changer ( if there is one ) if not use wire ties to secure to wire harness. TOYOTA FACTORY NAV USE PA20 TOY With out rear seat entertainment SET PIN SETTINGS #1,2,3 OFF #4 ON TOYOTA FACTORY NAV USE PA20 TOY With rear seat entertainment And all PRIUS RADIOS SET PIN SETTINGS #1,2 OFF #3,4 ON TOYOTA VEHICLES WITHOUT FACTORY NAV USE PA20 TOY All Other Radios EXCEPT Avalon, Tundra, Solara, Sequoia,Prius SET PIN SETTINGS #1, OFF #2,3,4 ON -TEXT DISPLAY Song Title info IS AVAILABLE ON RADIOS Toyota Lexus WITH A TEXT/TITLE BUTTON and on GEN 4 TOYOTA LEXUS NAV RADIOS 11. Drill ¼ hole to secure wire. Wire tie ipod end of cable ( A ) in glove box. Leaving 8 10 of play inside glove box. Southeast Toyota Distributors, LLC Page 5 of 9
TOYOTA YARIS IPOD INTERFACE 12. Find area behind the radio that will not interfere with the installation of radio, then mount and secure the interface unit with wire ties. 13. Reinstall dash in reverse order of this manual. 14. Reconnect battery and torque to 36 in lbs. ipod 15. Plug test ipod to the ipod connector in glove box. NOTE: if it does not play disconnect the power and reconnect. After all panels, covers and components have been reinstalled, test thoroughly, all mechanical and electrical components disconnected and removed from the vehicle during the installation of this accessory. TEXT DISPLAY SONG TITLE info IS AVAILABLE ON RADIOS WITH TEXT/TITLE BUTTON. NOTE: IF CAT TOY SAT cable is used, you do not lose XM tuner features or functions, or any CD,DVD, CDC features or functions. Works in conjunction with the XM tuner. Southeast Toyota Distributors, LLC Page 6 of 9
CONNECT AND PLAYING IPOD Connecting ipod to the interface Turn your Toyota radio ON before connecting your ipod. After connection, the ipod will take a few moments to change the external control mode. On the screen ipod will then show AND YOU ARE NOW ABLE TO SELECT IPOD MODE. Select ipod mode on Toyota radio Press the CD/SAT or DISC/AUX button on radio repeatedly until CD 6-x" appears on the radio display (x is the track number of "Now Playing" song on ipod). This display confirms that ipod mode has been completely synchronized and activated. Synchronization timing varies according to the number of play lists on your ipod. If ipod was playing previously before radio or ACC power was OFF, and the ipod was not disconnected, playback resumes from where it was stopped. Disconnecting ipod from the interface If your ipod is disconnected during playback in IPod mode, the radio will automatically switch to AM/FM mode. After disconnecting, IPod screen changes from the external control mode screen back to the normal menu. Press and hold the Play/Pause button on IPod may get the normal menu back faster. Playback of songs on ipod All audio tracks on your ipod will be played at disc 6. Track order is determined by the default order on your ipod. Selecting disc 1 to disc 5 on radio will allow playback of 5 Play lists on ipod. Every time when ipod is connected to the interface adapter, the playback starts from "Now Playing" song at disc 6 by default. If ipod was playing any of its Playlist right before the connection, the same Playlist will continue to play and repeated at disc 6 and ipod will switch to "All" as soon as fast forward button ( ) is pressed. Selecting a Play list Press DISC UP ( ) or DISC DOWN (V) button to select a Playlist. The selected Playlist will begin playing and the Playlist number and track number will be displayed. In rare cases, this may take up to few seconds for the completion of synchronization. After playing the last song in the current Playlist, playback will start again from the first track of this Playlist. Playlist Naming When ipod is connected to your radio via Toyota interface adapter, the adapter scans all available Playlists on ipod and looks for designated "Toyota" Playlists which are created for direct access with the DISC controls on Toyota radio. The designated "Toyota" Playlists are related to DISC number in the following manner: DISC 1: "TOYOTA1..." DISC 2: "TOYOTA2..." DISC 3: "TOYOTA3..." DISC 4: "TOYOTA4..." DISC 5: "TOYOTA5..." DISC 6: ALL SONGS on ipod The naming of designated "Toyota" Playlists in itune for the Toyota interface must be exactly as shown. "Toyota" must be in capital letters and there can be no spaces between "Toyota" text and number. However, you may add any text after the correct naming of a Playlist. (i.e. "Toyota1-Jazz", "Toyota3_Favorite3" are acceptable Playlist names for the Toyota IPod interface.) Southeast Toyota Distributors, LLC Page 7 of 9
Southeast Toyota Distributors, LLC Page 8 of 9
Southeast Toyota Distributors, LLC Page 9 of 9