Power Focus 4000 Systems

Power Focus 4000 Systems DS DRIVE SYSTEMS 141

Power Focus Controller POWER FOCUS 4000 SYSTEMS Controller hardware: The Power Focus range controls tools from the Tensor S, ST,STR, DS and ETX families. The Power Focus 4000 is available in two versions, Compact and Graph. The difference between them is the user interface, where the Graph features the color display and a full keyboard. Optional with fieldbus interface. FEATURES: POWER FOCUS CONTROLLER GRAPH W10 Fieldbus PF4000-G-HW 8433 7100 00 No PF4000-G-DN-HW 8433 7140 00 Device-Net PF4000-G-FLN-HW 8433 7141 00 FL-Net PF4000-G-PB-HW 8433 7142 00 ProfiBus PF4000-G-CC-HW 8433 7143 00 CC-Link PF4000-G-IB-HW 8433 7145 00 InterBus PF4000-G-MB-HW 8433 7147 00 ModBus PF4000-G-PN-HW 8433 7148 00 ProfiNet PF4000-G-EIP-HW 8433 7149 00 Ethernet IP PF4000 Graph Controller POWER FOCUS CONTROLLER COMPACT W10 Fieldbus PF4000-C-HW 8433 7100 05 No PF4000-C-DN-HW 8433 7140 05 Device-Net PF4000-C-FLN-HW 8433 7141 05 FL-Net PF4000-C-PB-HW 8433 7142 05 ProfiBus PF4000-C-CC-HW 8433 7143 05 CC-Link PF4000-C-IB-HW 8433 7145 05 InterBus PF4000-C-MB-HW 8433 7147 05 ModBus PF4000-C-PN-HW 8433 7148 05 ProfiNet PF4000-C-EIP-HW 8433 7149 05 Ethernet IP POWER FOCUS ACCESSORIES PF4000 Compact Controller ProfiBus connector PF 4000 8995 3195 10 Gender Changer SUB-D9 Male/Male 8995 5056 23 142

Power Focus RBU Atlas Copco s patented Rapid Backup Unit (RBU) concept transfers functionality to a non-configured hardware unit, ensuring that hardware can easily be upgraded should functionality requirements change. The RBU also acts as back-up for programming and configuration. If a change of hardware is required, just fit the RBU to the new hardware, switch on the unit and you re ready. All programming and network configurations are transferred in seconds. The RBU cuts downtime to a minimum. SCOPE OF SUPPLY: Controller Software Rapid Backup Unit (RBU) RBU DS RBU Bronze RBU Silver RBU Gold RBU X RBU DS RBU Bronze RBU Silver POWER FOCUS 4000 SYSTEMS POWER FOCUS RBU RBU Gold RBU DS 8433 0005 10 RBU Bronze 8433 0010 10 RBU Silver 8433 0015 20 RBU Gold 8433 0020 20 RBU X 8433 0080 20 143

ToolsTalk Power Focus POWER FOCUS 4000 SYSTEMS ToolsTalk Power Focus provides tightening parameter set-up, fieldbus and Logic Configurator set-up, plus customized reporting and presentation of statistics. With a simple click, results can be exported into other commercial file formats. ToolsTalk communicates with the Power Focus via Ethernet, USB or serial RS232. If you are networking from your office desk, ToolsTalk Power Focus allows for quickest access to the different control units connected. TOOLSTALK POWER FOCUS WR 07 Toolstalk Power Focus World Release 7 for Power Focus 3000 / 3100 / 3102 / 4000 controllers with Tensor S, ST, SL, STB and ETX tools Upgrade from W05 Ordering No Upgrade from W03 Ordering No ToolsTalk Power Focus W07 1 User License 8092 1183 01 8092 1183 31 8092 1183 51 ToolsTalk Power Focus W07 5 User License 8092 1183 05 8092 1183 35 8092 1183 55 ToolsTalk Power Focus W07 10 User License 8092 1183 10 8092 1183 40 8092 1183 60 ToolsTalk Power Focus W07 Plant License 8092 1183 99 8092 1183 49 8092 1183 69 TOOLSTALK POWER FOCUS WR 10 ToolsTalk Power Focus World Release 10 for Power Focus 3000 / 3100 / 3102 / 4000 controllers with Tensor S, ST, SL, STB and ETX tools Upgrade from W07 Ordering No Upgrade from W05 Ordering No Upgrade from W03 Ordering No ToolsTalk Power Focus W10 1 User License 8092 1190 01 8092 1190 31 8092 1190 51 8092 1190 71 ToolsTalk Power Focus W10 5 User License 8092 1190 05 8092 1190 35 8092 1190 55 8092 1190 75 ToolsTalk Power Focus W10 10 User License 8092 1190 10 8092 1190 40 8092 1190 60 8092 1190 80 ToolsTalk Power Focus W10 Plant License 8092 1190 99 8092 1190 49 8092 1190 69 8092 1190 89 TOOLSTALK BLM / STWRENCH TT BLM W09-1-User License 8059 0981 10 TT BLM W09-5-User License 8059 0981 11 TT BLM W09-10-User License 8059 0981 12 TT BLM W09 - Plant License 8059 0981 13 144

Power Focus Cables Tool and extension cables for Nutrunners Tensor DS Tool Tensor ST/STR Tool (31,61,81) Tensor ST/STR Tool (101) Tensor ETX Tool POWER FOCUS 4000 SYSTEMS TENSOR DS TOOL CABLE (RBU DS) Tensor DS Tool Cable 2m 4220 4380 02 Tensor DS Tool Cable 3m 4220 4380 03 Tensor DS Tool Cable 5m 4220 4380 05 Tensor DS Tool Cable 7m 4220 4380 07 Tensor DS Tool Cable 10m 4220 4380 10 Tensor DS Tool Cable 15m 4220 4380 15 Tensor DS Tool Cable TENSOR DS EXTENSION CABLE (RBU DS) Tensor DS Extension Cable 5m 4220 2047 05 Tensor DS Extension Cable 10m 4220 2047 10 Tensor DS Extension Cable 15m 4220 2047 15 TENSOR S TOOL CABLE FLAT Tensor S Tool Cable flat 2m 4220 3606 02 Tensor S Tool Cable flat 3m 4220 3606 03 Tensor S Tool Cable flat 5m 4220 3606 05 Tensor S Tool Cable flat 7m 4220 3606 07 Tensor S Tool Cable flat 10m 4220 3606 10 Tensor S Tool Cable flat 15m 4220 3606 15 Tensor S Tool Cable flat 145

Power Focus Cables POWER FOCUS 4000 SYSTEMS TENSOR S TOOL CABLE 90 Tensor S Tool Cable with 90 degrees connector 5m 4220 1560 05 Tensor S Tool Cable with 90 degrees connector 10m 4220 1560 10 Tensor S Tool Cable with 90 degrees connector 15m 4220 1560 15 TENSOR S EXTENSION CABLE Tensor S /ST/STR/ETX Extension Cable 5m 4220 1007 05 Tensor S /ST/STR/ETX Extension Cable 10m 4220 1007 10 Tensor S /ST/STR/ETX Extension Cable 15m 4220 1007 15 TENSOR ST/STR TOOL CABLE Tensor S Tool Cable 90 Tensor ST/STR Tool Cable 2m 4220 2636 02 Tensor ST/STR Tool Cable 3m 4220 2636 03 Tensor ST/STR Tool Cable 5m 4220 2636 05 Tensor ST/STR Tool Cable 7m 4220 2636 07 Tensor ST/STR Tool Cable 10m 4220 2636 10 Tensor ST/STR Tool Cable 15m 4220 2636 15 TENSOR ST/STR TOOL/SPIRAL CABLE Tensor ST/STR Tool/Spiral Cable 3m/4m 4220 2757 03 Tensor ST/STR Tool/Spiral Cable 7m/8m 4220 2757 07 Tensor ST/STR Tool/Spiral Cable 10m/12m 4220 2757 10 TENSOR ETX TOOL CABLE Tensor ETX Tool Cable 2m 4230 2195 02 Tensor ETX Tool Cable 5m 4230 2195 05 Tensor ETX Tool Cable 7m 4230 2195 07 Tensor ETX Tool Cable 10m 4230 2195 10 Tensor ETX Tool Cable 15m 4230 2195 15 Tensor ETX Tool Cable 20m 4230 2195 20 146

Power Focus Cables TENSOR ST/STR/ETX EXTENSION CABLE Tensor S,ST,STR,ETX Extension Cable 5m 4220 1563 05 Tensor S,ST,STR,ETX Extension Cable 10m 4220 1563 10 Tensor S,ST,STR,ETX Extension Cable 15m 4220 1563 15 TENSOR S/ST/STR/ETX EXTENSION CABLE Tensor S /ST/STR/ETX Extension Cable 5m 4220 1007 05 Tensor S /ST/STR/ETX Extension Cable 10m 4220 1007 10 Tensor S /ST/STR/ETX Extension Cable 15m 4220 1007 15 Cable POWER FOCUS 4000 SYSTEMS 147

Power Focus 4000 Systems (DS, Bronze, Silver) 149

Power Focus (DS, Bronze, Silver) Floor Stand Kits POWER FOCUS 4000 SYSTEMS (DS, BRONZE, SILVER) The Floor Stand Kits from Atlas Copco offer a new and improved controller mounting technique. FEATURES: Flexible mounting possibilities A unique future proof feature of this concept is the flexible controller mounting. There are four mounting possibilities, two on each side. Each Blind Plate can be replaced with a Mounting Plate / Cover Plate combination. SCOPE OF SUPPLY: Enclosed Framework (a) Mounting Plates (c) Cover Plates (d) Blind Plates (d) Future upgrades can be easily handled by replacing them with the Mounting Plate and Cover Plate combination Bolt down holes Power Distribution Startbox (from 2 to 9 channels) LED s of multifunction handle; (OK, NOK, Running) Main Switch Module MSM System Test / Documentation REQUIRED EQUIPMENT: OPTIONS: 150

Power Focus (DS, Bronze, Silver) Floor Stand Kits NOTES: Technical data: Power requirements: Feed Voltage: 90-120 VAC / 180-240 VAC Frequency: 50-60 Hz Fuse rating (approximation to be confirmed per project): 1-3 Channels 1 x 16A 1-6 Channels 2 x 16A 1-9 Channels 3 x 16A Maximum ambient operating temperature: 40 C / 104 F. POWER FOCUS 4000 SYSTEMS (DS, BRONZE, SILVER) 1 = Single side mounting 2 = Double side mounting 3 = Lifting eye 4 = Cable guiding 5 = Quick mounting 151

Power Focus (DS, Bronze, Silver) Floor Stand Kits POWER FOCUS 4000 SYSTEMS (DS, BRONZE, SILVER) FLOOR STAND DIMENSION POWER FOCUS (DS, BRONZE, SILVER) No. of Controllers min. Total Width max. Total Width Total Height 8439 0231 xx 1-8 600 mm 1200 mm 2000 mm 750 mm 8439 0232 xx 3-9 600 mm 1000 mm 2000 mm 750 mm POWER FOCUS (DS, BRONZE, SILVER) FLOOR STAND ONE SIDED MOUNTING No. of Controllers FS 600 FS 1000 FS 1200 Total Width Fuse rating Total Depth Nutrunner PF4000 kit 01ch FS06-1 DS, Bronze, Silver 8439 0231 01 1 1 600 mm 1 x 16 A DS/S/ST/STR PF4000 kit 02ch FS06-1 DS, Bronze, Silver 8439 0231 02 2 1 600 mm 1 x 16 A DS/S/ST/STR PF4000 kit 03ch FS10-1 DS, Bronze, Silver 8439 0231 03 3 1 1000 mm 1 x 16 A DS/S/ST/STR PF4000 kit 04ch FS10-1 DS, Bronze, Silver 8439 0231 04 4 1 1000 mm 2 x 16 A DS/S/ST/STR PF4000 kit 05ch FS10-1 DS, Bronze, Silver 8439 0231 05 5 1 1000 mm 2 x 16 A DS/S/ST/STR PF4000 kit 06ch FS10-1 DS, Bronze, Silver 8439 0231 06 6 1 1000 mm 2 x 16 A DS/S/ST/STR PF4000 kit 07ch FS12-1 DS, Bronze, Silver 8439 0231 07 7 1 1200 mm 3 x 16 A DS/S/ST/STR PF4000 kit 08ch FS12-1 DS, Bronze, Silver 8439 0231 08 5 1 1200 mm 3 x 16 A DS/S/ST/STR 152

Power Focus (DS, Bronze, Silver) Floor Stand Kits POWER FOCUS (DS, BRONZE, SILVER) FLOOR STAND TWO SIDED MOUNTING No. of Controllers FS 600 FS 1000 Total Width Fuse rating Nutrunner PF4000 kit 03ch FS06-2 DS, Bronze, Silver 8439 0232 03 3 1 600 mm 1 x 16 A DS/S/ST/STR PF4000 kit 04ch FS06-2 DS, Bronze, Silver 8439 0232 04 4 1 600 mm 2 x 16 A DS/S/ST/STR PF4000 kit 05ch FS06-2 DS, Bronze, Silver 8439 0232 05 5 1 600 mm 2 x 16 A DS/S/ST/STR PF4000 kit 06ch FS06-2 DS, Bronze, Silver 8439 0232 06 6 1 600 mm 2 x 16 A DS/S/ST/STR PF4000 kit 07ch FS10-2 DS, Bronze, Silver 8439 0232 07 7 1 1000 mm 3 x 16 A DS/S/ST/STR PF4000 kit 08ch FS10-2 DS, Bronze, Silver 8439 0232 08 8 1 1000 mm 3 x 16 A DS/S/ST/STR PF4000 kit 09ch FS10-2 DS, Bronze, Silver 8439 0232 09 9 1 1000 mm 3 x 16 A DS/S/ST/STR POWER FOCUS 4000 SYSTEMS (DS, BRONZE, SILVER) POWER FOCUS (DS, BRONZE, SILVER) ACCESSORIES FS CABLES 3012 All system components shall be connected to the protective bonding circuit (PE). Port 1 Port 2 Outer diameter Number of cores PE-Extension Cable 16mm² 2m 8995 3012 02 Ring Tongue 8 mm Ring Tongue 8 mm 8 mm 1 2 m PE-Extension Cable 16mm² 3m 8995 3012 03 Ring Tongue 8 mm Ring Tongue 8 mm 8 mm 1 3 m PE-Extension Cable 16mm² 5m 8995 3012 05 Ring Tongue 8 mm Ring Tongue 8 mm 8 mm 1 5 m PE-Extension Cable 16mm² 7m 8995 3012 07 Ring Tongue 8 mm Ring Tongue 8 mm 8 mm 1 7 m PE-Extension Cable 16mm² 10m 8995 3012 10 Ring Tongue 8 mm Ring Tongue 8 mm 8 mm 1 10 m PE-Extension Cable 16mm² 15m 8995 3012 15 Ring Tongue 8 mm Ring Tongue 8 mm 8 mm 1 15 m Cable length 153

Power Focus (DS, Bronze, Silver) Mounting Plate Kits POWER FOCUS 4000 SYSTEMS (DS, BRONZE, SILVER) The Mounting Plate Kits from Atlas Copco offer an open controller mounting system prepared for customer integration. SCOPE OF SUPPLY: Mounting Plate Cable hooks Power Distribution Startbox (from 2 to 9 channels) LED s of multifunction handle; (OK, NOK, Running) Main Switch Module MSM System Test / Documentation REQUIRED EQUIPMENT: OPTIONS: NOTES: Technical data: Power requirements: Feed Voltage: 90-120 VAC / 180-240 VAC Frequency: 50-60 Hz Fuse rating (approximation to be confirmed per project): 1-3 Channels 1 x 16A 1-6 Channels 2 x 16A 1-9 Channels 3 x 16A Maximum ambient operating temperature: 40 C / 104 F. Mounting Plate Kits cannot be used with Floor stands 154

Power Focus (DS, Bronze, Silver) Mounting Plate Kits MOUNTING PLATE DIMENSION POWER FOCUS (DS, BRONZE, SILVER) No. of Controllers min. Total Width max. Total Width max. Total Height 8439 0211 xx 1-9 700 mm 1100 mm 2160 mm 325 mm POWER FOCUS (DS, BRONZE, SILVER) MOUNTING PLATE KITS No. of Controllers MP07 MP09 MP11 Total Width Fuse rating Total Depth Nutrunner PF4000 kit 01ch MP07-1 DS, Bronze, Silver 8439 0211 01 1 1 700 mm 1 x 16 A DS/S/ST/STR PF4000 kit 02ch MP09-1 DS, Bronze, Silver 8439 0211 02 2 1 900 mm 1 x 16 A DS/S/ST/STR PF4000 kit 03ch MP11-1 DS, Bronze, Silver 8439 0211 03 3 1 1100 mm 1 x 16 A DS/S/ST/STR PF4000 kit 04ch MP07-2 DS, Bronze, Silver 8439 0211 04 4 2 700 mm 2 x 16 A DS/S/ST/STR PF4000 kit 05ch MP07-3 DS, Bronze, Silver 8439 0211 05 5 3 700 mm 2 x 16 A DS/S/ST/STR PF4000 kit 06ch MP07-3 DS, Bronze, Silver 8439 0211 06 6 3 700 mm 2 x 16 A DS/S/ST/STR PF4000 kit 08ch MP11-3 DS, Bronze, Silver 8439 0211 08 8 2 1 1100 mm 3 x 16 A DS/S/ST/STR PF4000 kit 09ch MP11-3 DS, Bronze, Silver 8439 0211 09 9 2 1 1100 mm 3 x 16 A DS/S/ST/STR POWER FOCUS 4000 SYSTEMS (DS, BRONZE, SILVER) 155

Power Focus (DS, Bronze, Silver) Mounting Plate Kits POWER FOCUS 4000 SYSTEMS (DS, BRONZE, SILVER) POWER FOCUS (DS, BRONZE, SILVER) OPTION MOUNTING PLATE Modification MPxx PF4000 DS, Bronze, Silver 8995 3328 11 POWER FOCUS (DS, BRONZE, SILVER) ACCESSORIES MP CABLES 3012 All system components shall be connected to the protective bonding circuit (PE). Port 1 Port 2 Outer diameter Number of cores Cable length PE-Extension Cable 16mm² 2m 8995 3012 02 Ring Tongue 8 mm Ring Tongue 8 mm 8 mm 1 2 m PE-Extension Cable 16mm² 3m 8995 3012 03 Ring Tongue 8 mm Ring Tongue 8 mm 8 mm 1 3 m PE-Extension Cable 16mm² 5m 8995 3012 05 Ring Tongue 8 mm Ring Tongue 8 mm 8 mm 1 5 m PE-Extension Cable 16mm² 7m 8995 3012 07 Ring Tongue 8 mm Ring Tongue 8 mm 8 mm 1 7 m PE-Extension Cable 16mm² 10m 8995 3012 10 Ring Tongue 8 mm Ring Tongue 8 mm 8 mm 1 10 m PE-Extension Cable 16mm² 15m 8995 3012 15 Ring Tongue 8 mm Ring Tongue 8 mm 8 mm 1 15 m 156

Power Focus (DS, Bronze, Silver) Multifunction Handles Control handle with integrated indicator box for Power Focus (DS, Bronze, Silver) Controllers. Functions: the handle to a single controller (only a 1 channel system) to the start box (for 2-9 channel systems) Multifunction Handle The start box: => (The start box belongs to the scope of supply of every Power Focus (DS, Bronze, Silver) kit) SCOPE OF SUPPLY: OPTIONS: Extension cables or other cable lengths must be ordered separately. See Accessories POWER FOCUS (DS, BRONZE, SILVER) MULTI-FUNCTION HANDLE KIT POWER FOCUS 4000 SYSTEMS (DS, BRONZE, SILVER) MFH 01 ch Kit DS-Drive, PF4000 DS/B/S 8995 3241 01 MFH 02 ch Kit DS-Drive, PF4000 DS/B/S 8995 3241 02 MFH 03 ch Kit DS-Drive, PF4000 DS/B/S 8995 3241 03 MFH 04 ch Kit DS-Drive, PF4000 DS/B/S 8995 3241 04 MFH 05 ch Kit DS-Drive, PF4000 DS/B/S 8995 3241 05 MFH 06 ch Kit DS-Drive, PF4000 DS/B/S 8995 3241 06 MFH 07 ch Kit DS-Drive, PF4000 DS/B/S 8995 3241 07 MFH 08 ch Kit DS-Drive, PF4000 DS/B/S 8995 3241 08 MFH 09 ch Kit DS-Drive, PF4000 DS/B/S 8995 3241 09 157

Power Focus (DS, Bronze, Silver) Multifunction Handles POWER FOCUS 4000 SYSTEMS (DS, BRONZE, SILVER) POWER FOCUS (DS, BRONZE, SILVER) OPTION MFH Mechanical connection for MFH DS/PF 8995 7890 09 POWER FOCUS (DS, BRONZE, SILVER) ACCESSORIES MFH Port 1 Port 2 Outer diameter Number of cores Cable length Control Cable 3055 3m 8995 3055 03 PT06/26 Female open end 11,4 mm 20 3 m Control Cable 3055 5m 8995 3055 05 PT06/26 Female open end 11,4 mm 20 5 m Control Cable 3055 7m 8995 3055 07 PT06/26 Female open end 11,4 mm 20 7 m Control Cable 3055 10m 8995 3055 10 PT06/26 Female open end 11,4 mm 20 10 m Control Cable 3055 15m 8995 3055 15 PT06/26 Female open end 11,4 mm 20 15 m Control Cable 3055 20m 8995 3055 20 PT06/26 Female open end 11,4 mm 20 20 m Control Cable 3055 25m 8995 3055 25 PT06/26 Female open end 11,4 mm 20 25 m Control / Extension Cable 3054 3m 8995 3054 03 PT06/26 Female PT01/26 Male 11,4 mm 20 3 m Control / Extension Cable 3054 5m 8995 3054 05 PT06/26 Female PT01/26 Male 11,4 mm 20 5 m Control / Extension Cable 3054 7m 8995 3054 07 PT06/26 Female PT01/26 Male 11,4 mm 20 7 m Control / Extension Cable 3054 10m 8995 3054 10 PT06/26 Female PT01/26 Male 11,4 mm 20 10 m Control / Extension Cable 3054 15m 8995 3054 15 PT06/26 Female PT01/26 Male 11,4 mm 20 15 m Control / Extension Cable 3054 20m 8995 3054 20 PT06/26 Female PT01/26 Male 11,4 mm 20 20 m Control / Extension Cable 3054 25m 8995 3054 25 PT06/26 Female PT01/26 Male 11,4 mm 20 25 m 158

Power Focus (DS, Bronze, Silver) Options - Stacklight The Stacklight DSL-03 is designed to interface with controllers equipped with internal I/O connectors, which enables high diversity regarding connection possibilities such as: The installation workflow is quick and easy, starting with fastening of the stacklight, followed by connecting cables and configuring the software interface. There are two versions available for ordering; DSL-03 with Push Button and DSL-03 with Blanking Plugs. The differences between the versions are the glass colours and the choice of buttons. Both versions have three lights as a standard with the option to add two more. POWER FOCUS (DS, BRONZE, SILVER) STACKLIGHT KIT Stacklight DSL-03 with push button 8439 0423 10 Stacklight DSL-03 with blanking plugs 8439 0423 11 POWER FOCUS (DS, BRONZE, SILVER) OPTION STACKLIGHT Mechanical connection for Selector DS/PF 8995 7890 08 POWER FOCUS (DS, BRONZE, SILVER) ACCESSORIES STACKLIGHT Port 1 Port 2 Outer diameter Stacklight DSL-03 Blanking Number of cores Cable length Control Cable 536 3m 8995 3536 03 M23/12 Female open end 10 mm 12 3 m Control Cable 536 5m 8995 3536 05 M23/12 Female open end 10 mm 12 5 m Control Cable 536 7m 8995 3536 07 M23/12 Female open end 10 mm 12 7 m Control Cable 536 10m 8995 3536 10 M23/12 Female open end 10 mm 12 10 m Control Cable 536 15m 8995 3536 15 M23/12 Female open end 10 mm 12 15 m Control / Extension Cable 503 3m 8995 3503 03 M23/12 Female M23/12 Male 10 mm 12 3 m Control / Extension Cable 503 5m 8995 3503 05 M23/12 Female M23/12 Male 10 mm 12 5 m Control / Extension Cable 503 7m 8995 3503 07 M23/12 Female M23/12 Male 10 mm 12 7 m Control / Extension Cable 503 10m 8995 3503 10 M23/12 Female M23/12 Male 10 mm 12 10 m Control / Extension Cable 503 15m 8995 3503 15 M23/12 Female M23/12 Male 10 mm 12 15 m M23 / 12 pol male connector with threaded joint 8995 3190 06 - - Stacklight DSL-03 Push Control Cable 536 Cable 503 POWER FOCUS 4000 SYSTEMS (DS, BRONZE, SILVER) 159

Power Focus (DS, Bronze, Silver) Options - Selector POWER FOCUS 4000 SYSTEMS (DS, BRONZE, SILVER) Rotary Selector, Socket and Bit Selector for parameter selection. SCOPE OF SUPPLY: Selector switch 0-11 Kit PF4000 S, B, DS: Selector 4 Kit PF4000 S,B,DS: Rotary Selector Kit PF4000 S, B, DS: OPTIONS: Extension cables or other cable lengths must be ordered separately. See Accessories NOTES: Selection one out of three only POWER FOCUS (DS, BRONZE, SILVER) SELECTOR KITS Selectorswitch 0-11 Kit DS-Drive, PF4000 DS/B/S 8995 3240 01 Selector 4 Kit DS-Drive, PF4000 DS/B/S 8995 3240 10 Rotary Selector Kit DS-Drive, PF4000 DS/B/S 8995 3240 11 Parameterswitch 0-11 Selector 4 POWER FOCUS (DS, BRONZE, SILVER) OPTION SELECTOR Selector Rotary Mechanical connection for Selector DS/PF 8995 7890 08 160

Power Focus (DS, Bronze, Silver) Options - Selector POWER FOCUS (DS, BRONZE, SILVER) ACCESSORIES SELECTOR SWITCH Port 1 Port 2 Outer diameter Number of cores Cable length Control Cable 530 1m 8995 3530 01 M12/5 Female open end 5 mm 5 1 m Control Cable 530 3m 8995 3530 03 M12/5 Female open end 5 mm 5 3 m Control Cable 530 5m 8995 3530 05 M12/5 Female open end 5 mm 5 5 m Control Cable 530 7m 8995 3530 07 M12/5 Female open end 5 mm 5 7 m Control Cable 530 10m 8995 3530 10 M12/5 Female open end 5 mm 5 10 m Control Cable 530 15m 8995 3530 15 M12/5 Female open end 5 mm 5 15 m Control / Extension Cable 501 1m 8995 3501 01 M12/5 Female M12/5 Male 5 mm 5 1 m Control / Extension Cable 501 3m 8995 3501 03 M12/5 Female M12/5 Male 5 mm 5 3 m Control / Extension Cable 501 5m 8995 3501 05 M12/5 Female M12/5 Male 5 mm 5 5 m Control / Extension Cable 501 7m 8995 3501 07 M12/5 Female M12/5 Male 5 mm 5 7 m Control / Extension Cable 501 10m 8995 3501 10 M12/5 Female M12/5 Male 5 mm 5 10 m Control / Extension Cable 501 15m 8995 3501 15 M12/5 Female M12/5 Male 5 mm 5 15 m POWER FOCUS (DS, BRONZE, SILVER) ACCESSORIES SELECTOR 4 Port 1 Port 2 Outer diameter Number of cores Cable length Control Cable 536 3m 8995 3536 03 M23/12 Female open end 10 mm 12 3 m Control Cable 536 5m 8995 3536 05 M23/12 Female open end 10 mm 12 5 m Control Cable 536 7m 8995 3536 07 M23/12 Female open end 10 mm 12 7 m Control Cable 536 10m 8995 3536 10 M23/12 Female open end 10 mm 12 10 m Control Cable 536 15m 8995 3536 15 M23/12 Female open end 10 mm 12 15 m Control / Extension Cable 503 3m 8995 3503 03 M23/12 Female M23/12 Male 10 mm 12 3 m Control / Extension Cable 503 5m 8995 3503 05 M23/12 Female M23/12 Male 10 mm 12 5 m Control / Extension Cable 503 7m 8995 3503 07 M23/12 Female M23/12 Male 10 mm 12 7 m Control / Extension Cable 503 10m 8995 3503 10 M23/12 Female M23/12 Male 10 mm 12 10 m Control / Extension Cable 503 15m 8995 3503 15 M23/12 Female M23/12 Male 10 mm 12 15 m Cable 501 Control Cable 536 Cable 503 POWER FOCUS 4000 SYSTEMS (DS, BRONZE, SILVER) POWER FOCUS (DS, BRONZE, SILVER) ACCESSORIES ROTARY SELECTOR Port 1 Port 2 Outer diameter Number of cores Cable length Control Cable 530 1m 8995 3530 01 M12/5 Female open end 5 mm 5 1 m Control Cable 530 3m 8995 3530 03 M12/5 Female open end 5 mm 5 3 m Control Cable 530 5m 8995 3530 05 M12/5 Female open end 5 mm 5 5 m Control Cable 530 7m 8995 3530 07 M12/5 Female open end 5 mm 5 7 m Control Cable 530 10m 8995 3530 10 M12/5 Female open end 5 mm 5 10 m Control Cable 530 15m 8995 3530 15 M12/5 Female open end 5 mm 5 15 m Control Cable 530 161

Power Focus (DS, Bronze, Silver) Options - Selector POWER FOCUS 4000 SYSTEMS (DS, BRONZE, SILVER) Port 1 Port 2 Outer diameter Number of cores Cable length Control / Extension Cable 501 1m 8995 3501 01 M12/5 Female M12/5 Male 5 mm 5 1 m Control / Extension Cable 501 3m 8995 3501 03 M12/5 Female M12/5 Male 5 mm 5 3 m Control / Extension Cable 501 5m 8995 3501 05 M12/5 Female M12/5 Male 5 mm 5 5 m Control / Extension Cable 501 7m 8995 3501 07 M12/5 Female M12/5 Male 5 mm 5 7 m Control / Extension Cable 501 10m 8995 3501 10 M12/5 Female M12/5 Male 5 mm 5 10 m Control / Extension Cable 501 15m 8995 3501 15 M12/5 Female M12/5 Male 5 mm 5 15 m M12/5 Round plug connector male straight 8995 3190 22 - - Cable 501 162

Power Focus (DS, Bronze, Silver) Options - Selector - Connectivity POWER FOCUS 4000 SYSTEMS (DS, BRONZE, SILVER) Options-Selector Power Focus 163

Power Focus 4000 Systems (Gold, ETX) POWER FOCUS 4000 SYSTEMS (DS,BRONZE,SILVER) 165

Power Focus (Gold, ETX) Floor Stand Kits The Floor Stand Kits from Atlas Copco offer a new and improved controller mounting technique. FEATURES: Flexible mounting possibilities A unique future proof feature of this concept is the flexible controller mounting. There are four mounting possibilities, two on each side. Each Blind Plate can be replaced with a Mounting Plate / Cover Plate combination. SCOPE OF SUPPLY: Enclosed Framework (a) Mounting Plates (c) Cover Plates (d) Blind Plates (b) replacing them with the Mounting Plate and Cover Plate combination Bolt down holes Power Distribution Ethernet Switch Controller level Main Switch Module MSM System Test / Documentation REQUIRED EQUIPMENT: 166

Power Focus (Gold, ETX) Floor Stand Kits NOTES: Technical data: Power requirements: Feed Voltage: 90-120 VAC / 180-240 VAC Frequency: 50-60 Hz Fuse rating (approximation to be confirmed per project): 1-3 Channels 1 x 16A 1-6 Channels 2 x 16A 1-9 Channels 3 x 16A Maximum ambient operating temperature: 40 C / 104 F. 1 = Single side mounting 2 = Double side mounting 3 = Lifting eye 4 =Cable guiding 5 = Quick mounting 167

Power Focus (Gold, ETX) Floor Stand Kits FLOOR STAND DIMENSION POWER FOCUS (GOLD, ETX) No. of Controllers min. Total Width max. Total Width Total Height 8439 0241 xx 1-9 600 mm 1200 mm 2000 mm 750 mm 8439 0242 xx 4-9 600 mm 1000 mm 2000 mm 750 mm POWER FOCUS (GOLD, ETX) FLOOR STAND ONE SIDED MOUNTING No. of Controllers FS 600 FS 1000 FS 1200 Total Width Fuse rating Total Depth Nutrunner PF4000 kit 01ch FS06-1 Gold & ETX 8439 0241 01 1 1 600 mm 1 x 16 A DS/S/ST/STR/ETX PF4000 kit 02ch FS06-1 Gold & ETX 8439 0241 02 2 1 600 mm 1 x 16 A DS/S/ST/STR/ETX PF4000 kit 03ch FS06-1 Gold & ETX 8439 0241 03 3 1 600 mm 1 x 16 A DS/S/ST/STR/ETX PF4000 kit 04ch FS10-1 Gold & ETX 8439 0241 04 4 1 1000 mm 2 x 16 A DS/S/ST/STR/ETX PF4000 kit 05ch FS10-1 Gold & ETX 8439 0241 05 5 1 1000 mm 2 x 16 A DS/S/ST/STR/ETX PF4000 kit 06ch FS10-1 Gold & ETX 8439 0241 06 6 1 1000 mm 2 x 16 A DS/S/ST/STR/ETX PF4000 kit 07ch FS10-1 Gold & ETX 8439 0241 07 7 1 1000 mm 3 x 16 A DS/S/ST/STR/ETX PF4000 kit 08ch FS12-1 Gold & ETX 8439 0241 08 8 1 1200 mm 3 x 16 A DS/S/ST/STR/ETX PF4000 kit 09ch FS12-1 Gold & ETX 8439 0241 09 9 1 1200 mm 3 x 16 A DS/S/ST/STR/ETX 168

Power Focus (Gold, ETX) Floor Stand Kits POWER FOCUS (GOLD, ETX) FLOOR STAND TWO SIDED MOUNTING No. of Controllers FS 600 FS 1000 Total Width Fuse rating Nutrunner PF4000 kit 04ch FS06-2 Gold & ETX 8439 0242 04 4 1 600 mm 2 x 16 A DS/S/ST/STR/ETX PF4000 kit 05ch FS06-2 Gold & ETX 8439 0242 05 5 1 600 mm 2 x 16 A DS/S/ST/STR/ETX PF4000 kit 06ch FS06-2 Gold & ETX 8439 0242 06 6 1 600 mm 2 x 16 A DS/S/ST/STR/ETX PF4000 kit 07ch FS10-2 Gold & ETX 8439 0242 07 7 1 1000 mm 3 x 16 A DS/S/ST/STR/ETX PF4000 kit 08ch FS10-2 Gold & ETX 8439 0242 08 8 1 1000 mm 3 x 16 A DS/S/ST/STR/ETX PF4000 kit 09ch FS10-2 Gold & ETX 8439 0242 09 9 1 1000 mm 3 x 16 A DS/S/ST/STR/ETX POWER FOCUS (GOLD, ETX) ACCESSORIES FS CABLES 3012 All system components shall be connected to the protective bonding circuit (PE). Port 1 Port 2 Outer diameter Number of cores PE-Extension Cable 16mm² 2m 8995 3012 02 Ring Tongue 8 mm Ring Tongue 8 mm 8 mm 1 2 m PE-Extension Cable 16mm² 3m 8995 3012 03 Ring Tongue 8 mm Ring Tongue 8 mm 8 mm 1 3 m PE-Extension Cable 16mm² 5m 8995 3012 05 Ring Tongue 8 mm Ring Tongue 8 mm 8 mm 1 5 m PE-Extension Cable 16mm² 7m 8995 3012 07 Ring Tongue 8 mm Ring Tongue 8 mm 8 mm 1 7 m PE-Extension Cable 16mm² 10m 8995 3012 10 Ring Tongue 8 mm Ring Tongue 8 mm 8 mm 1 10 m PE-Extension Cable 16mm² 15m 8995 3012 15 Ring Tongue 8 mm Ring Tongue 8 mm 8 mm 1 15 m Cable length 169

Power Focus (Gold, ETX) Mounting Plate Kits The Mounting Plate Kits from Atlas Copco offer an open controller mounting system prepared for customer integration. SCOPE OF SUPPLY: Mounting Plate Cable hooks Power Distribution Ethernet Switch Controller level Main Switch Module MSM System Test / Documentation REQUIRED EQUIPMENT: NOTES: Technical data: Power requirements: Feed Voltage: 90-120 VAC / 180-240 VAC Frequency: 50-60 Hz Fuse rating (approximation to be confirmed per project): 1-3 Channels 1 x 16A 1-6 Channels 2 x 16A 1-9 Channels 3 x 16A Maximum ambient operating temperature: 40 C / 104 F. Mounting Plate Kits cannot be used with Floor stands 170

Power Focus (Gold, ETX) Mounting Plate Kits MOUNTING PLATE DIMENSION POWER FOCUS (GOLD, ETX) No. of Controllers min. Total Width max. Total Width min. Total Height Total Depth 8439 0221 xx 1-9 700 mm 900 mm 2160 mm 325 mm POWER FOCUS (GOLD, ETX) MOUNTING PLATE KITS No. of Controllers MP07 MP09 Total Width Fuse rating Nutrunner PF4000 kit 01ch MP07-1 Gold & ETX 8439 0221 01 1 1 700 mm 1 x 16 A DS/S/ST/STR/ETX PF4000 kit 02ch MP07-1 Gold & ETX 8439 0221 02 2 1 900 mm 1 x 16 A DS/S/ST/STR/ETX PF4000 kit 03ch MP09-1 Gold & ETX 8439 0221 03 3 1 900 mm 1 x 16 A DS/S/ST/STR/ETX PF4000 kit 04ch MP07-2 Gold & ETX 8439 0221 04 4 2 700 mm 1 x 16 A DS/S/ST/STR/ETX PF4000 kit 05ch MP07-2 Gold & ETX 8439 0221 05 5 2 700 mm 2 x 16 A DS/S/ST/STR/ETX PF4000 kit 06ch MP07-3 Gold & ETX 8439 0221 06 6 3 700 mm 2 x 16 A DS/S/ST/STR/ETX PF4000 kit 07ch MP07-3 Gold & ETX 8439 0221 07 7 3 700 mm 3 x 16 A DS/S/ST/STR/ETX PF4000 kit 08ch MP07-3 Gold & ETX 8439 0221 08 8 3 700 mm 3 x 16 A DS/S/ST/STR/ETX PF4000 kit 09ch MP09-3 Gold & ETX 8439 0221 09 9 3 900 mm 3 x 16 A DS/S/ST/STR/ETX 171

Power Focus (Gold, ETX) Mounting Plate Kits POWER FOCUS (GOLD, ETX) OPTION MOUNTING PLATE Modification MPxx PF4000 Gold & ETX 8995 3328 12 POWER FOCUS (GOLD, ETX) ACCESSORIES MP CABLES 3012 All system components shall be connected to the protective bonding circuit (PE). Port 1 Port 2 Outer diameter Number of cores PE-Extension Cable 16mm² 2m 8995 3012 02 Ring Tongue 8 mm Ring Tongue 8 mm 8 mm 1 2 m PE-Extension Cable 16mm² 3m 8995 3012 03 Ring Tongue 8 mm Ring Tongue 8 mm 8 mm 1 3 m PE-Extension Cable 16mm² 5m 8995 3012 05 Ring Tongue 8 mm Ring Tongue 8 mm 8 mm 1 5 m PE-Extension Cable 16mm² 7m 8995 3012 07 Ring Tongue 8 mm Ring Tongue 8 mm 8 mm 1 7 m PE-Extension Cable 16mm² 10m 8995 3012 10 Ring Tongue 8 mm Ring Tongue 8 mm 8 mm 1 10 m PE-Extension Cable 16mm² 15m 8995 3012 15 Ring Tongue 8 mm Ring Tongue 8 mm 8 mm 1 15 m Cable length 172

Power Focus Options - Indicator Box Indicator Box Kit Power Focus Functions: up to 10 spindles SCOPE OF SUPPLY: REQUIRED EQUIPMENT: See Mechanical Systems OPTIONS: Extension cables or other cable lengths must be ordered separately. See Accessories Indicator Box POWER FOCUS INDICATOR BOX KIT Indicator Box 1-10 ch Kit Power Focus ETX/G 8439 0422 00 POWER FOCUS OPTION INDICATOR BOX Mechanical connection for Indicator Box 8995 7890 02 173

Power Focus Options - Indicator Box POWER FOCUS ACCESSORIES INDICATOR BOX This cable connects the Indicator Box with the DS Drives or Power Focus Systems. The cable includes wires for E-Stop, I/O Bus and for the Power Focus System the Start/Reverse signals. M23 Power Focus Cable 2m 4243 0280 80 M23 open end Cable 1,5m 4243 0281 01 M23 open end Cable 5m 4243 0281 05 M23 Extension Cable 3m 4243 0282 03 M23 Extension Cable 5m 4243 0282 05 M23 Extension Cable 10m 4243 0282 10 M23 Extension Cable 15m 4243 0282 15 M23 Extension Cable 20m 4243 0282 20 M23 Extension Cable 25m 4243 0282 25 174

Power Focus Options - Indicator Box - Connectivity Option-Indicator Box PF4000 175

Power Focus Options - Operator Panel Operator Panel Basic (Advanced) Kit Power Focus A key phrase in today s production is Error Proofing. The Controllers of the series Power Focus can be equipped with standard solutions for the worker support. The Operator Panel offers a high flexibility including configurable switches, lamps and buttons as well as displays and external I/O s. It is easily to connect to the I/O Bus port on the Power Focus Controller. SCOPE OF SUPPLY: I/O Bus Cable / Adapter Cable 467; 15 m REQUIRED EQUIPMENT: See Mechanical Systems OPTIONS: Extension cables or other cable lengths must be ordered separately. See Accessories NOTES: The operator handle can be connected directly to the Operator Panel with the E-Stop with Connection Start Kit PF400 ETX/G 8995 3130 31. Operator Panel Advanced Operator Panel Basic POWER FOCUS OPERATOR PANEL KIT Operator Panel Advanced Kit PF4000 ETX/G 8439 0421 00 Operator Panel Basic Kit PF4000 ETX/G 8439 0421 01 Modification Operator Panel Power Focus 8995 3328 70 POWER FOCUS OPTION OPERATOR PANEL Mechanical connection for Operator Panel 8995 7890 01 176

Power Focus Options - Operator Panel POWER FOCUS ACCESSORIES OPERATOR PANEL All cables with article numbers starting from 8995 3460 xx to 8995 3469 xx are optimized for use in cable chains. Port 1 Port 2 Outer diameter Number of cores Cable length cable 467 1m 8995 3467 01 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 1 m cable 467 3m 8995 3467 03 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 3 m cable 467 5m 8995 3467 05 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 5 m cable 467 7m 8995 3467 07 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 7 m cable 467 10m 8995 3467 10 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 10 m cable 467 15m 8995 3467 15 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 15 m cable 467 20m 8995 3467 20 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 20 m cable 467 25m 8995 3467 25 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 25 m cable 467 30m 8995 3467 30 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 30 m I/O Bus cable 0,5m 4222 0917 00 SUB-D 90 Female SUB-D 90 Female 6 mm 8 0,5 m I/O Bus cable 1m 4222 0917 01 SUB-D 90 Female SUB-D 90 Female 6 mm 8 1 m I/O Bus cable 3m 4222 0917 03 SUB-D 90 Female SUB-D 90 Female 6 mm 8 3 m I/O Bus cable 5m 4222 0917 05 SUB-D 90 Female SUB-D 90 Female 6 mm 9 5 m I/O Bus cable 10m 4222 0917 10 SUB-D 90 Female SUB-D 90 Female 6 mm 8 10 m I/O Bus cable 15m 4222 0917 15 SUB-D 90 Female SUB-D 90 Female 6 mm 8 15 m Cable 467 177

Power Focus Options - Operator Panel - Connectivity Option-Operator Panel PF4000 178

Power Focus Options - Operator Panel E-Stop The Emergency Stop push button is placed in Pos I on the Operator Panel. SCOPE OF SUPPLY: OPTIONS: Extension cables or other cable lengths must be ordered separately. See Accessories POWER FOCUS OPERATOR PANEL E-STOP KIT E-Stop OP with Connection Start Kit PF4000 ETX/G 8995 3130 31 POWER FOCUS ACCESSORIES OPERATOR PANEL E-STOP Push turn function push button Ronis 8995 6016 87 Push turn function push button CES 8995 6016 88 Push turn function push button BKS S1 8995 6016 89 Push turn function push button OMR 8995 6016 90 POWER FOCUS ACCESSORIES OPERATOR PANEL E-STOP CABLE Port 1 Port 2 Outer diameter Number of cores Cable length Control Adapter Cable 542 3m 8995 3542 03 M12/8-4 Male-Female open end 5,8 mm 8 3 m Control Adapter Cable 542 5m 8995 3542 05 M12/8-4 Male-Female open end 5,8 mm 8 5 m Control Adapter Cable 542 7m 8995 3542 07 M12/8-4 Male-Female open end 5,8 mm 8 7 m Control Adapter Cable 542 10m 8995 3542 10 M12/8-4 Male-Female open end 5,8 mm 8 10 m Control Adapter Cable 542 15m 8995 3542 15 M12/8-4 Male-Female open end 5,8 mm 8 15 m Control Adapter Cable 542 179

Power Focus Options - Stacklight The Stacklight provides a cost effective quality integrated fastening solution for today s production. The Power Focus control units and advanced drives from Tensor DS, can now be provided with an effective standard solution for the operator interface. The Stacklight ESL-04 is a standard device which can be easily installed and adapted to your process. It is easily to connect to the I/O Bus port on the Power Focus Controller. SCOPE OF SUPPLY: I/O bus Cable / Adapter Cable 467; 15 m OPTIONS: Extension cables or other cable lengths must be ordered separately. See Accessories POWER FOCUS STACKLIGHT KIT Stacklight ESL-04 Standard PF4000 ETX/G 8439 0423 00 Stacklight ESL-04 Red Kit PF4000 ETX/G 8439 0423 01 Compact Stacklight ESL-04 Yellow Kit PF4000 ETX/G 8439 0423 02 Stacklight ESL-04 Siren Kit PF4000 ETX/G 8439 0423 03 Stacklight ESL-04 Compact Kit PF4000 ETX/G 8439 0423 04 POWER FOCUS OPTION STACKLIGHT Modification Stacklight ESL-04 Power Focus 8995 3328 51 Mechanical connection for Stacklight 8995 7890 03 180

Power Focus Options - Stacklight POWER FOCUS ACCESSORIES STACKLIGHT All cables with article numbers starting from 8995 3460 xx to 8995 3469 xx are optimized for use in cable chains. Port 1 Port 2 Outer diameter Number of cores Cable length cable 467 1m 8995 3467 01 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 1 m cable 467 3m 8995 3467 03 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 3 m cable 467 5m 8995 3467 05 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 5 m cable 467 7m 8995 3467 07 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 7 m cable 467 10m 8995 3467 10 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 10 m cable 467 15m 8995 3467 15 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 15 m cable 467 20m 8995 3467 20 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 20 m cable 467 25m 8995 3467 25 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 25 m cable 467 30m 8995 3467 30 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 30 m I/O Bus cable 0,5m 4222 0917 00 SUB-D 90 Female SUB-D 90 Female 6 mm 8 0,5 m I/O Bus cable 1m 4222 0917 01 SUB-D 90 Female SUB-D 90 Female 6 mm 8 1 m I/O Bus cable 3m 4222 0917 03 SUB-D 90 Female SUB-D 90 Female 6 mm 8 3 m I/O Bus cable 5m 4222 0917 05 SUB-D 90 Female SUB-D 90 Female 6 mm 9 5 m I/O Bus cable 10m 4222 0917 10 SUB-D 90 Female SUB-D 90 Female 6 mm 8 10 m I/O Bus cable 15m 4222 0917 15 SUB-D 90 Female SUB-D 90 Female 6 mm 8 15 m Cable 467 181

Power Focus Options - Stacklight - Connectivity Option-Stacklight PF4000 182

Power Focus Options - I/O Expander The I/O-expander is designed to extend I/O with 8 digital inputs and 8 relay outputs. It is easy to connect to the I/O Bus port on the Power Focus Controller. SCOPE OF SUPPLY: I/O Bus Cable / Adapter Cable 467; 15 m OPTIONS: Extension cables or other cable lengths must be ordered separately. See Accessories POWER FOCUS I/O EXPANDER KIT I/O Expander Kit PF4000 ETX/G 8439 0425 00 I/O Expander Sealed Kit PF4000 ETX/G 8439 0425 01 POWER FOCUS OPTION I/O EXPANDER Mechanical connection for IO-Expander 8995 7890 05 POWER FOCUS ACCESSORIES I/O EXPANDER All cables with article numbers starting from 8995 3460 xx to 8995 3469 xx are optimized for use in cable chains. cable 467 1m cable 467 3m cable 467 5m cable 467 7m cable 467 10m cable 467 15m cable 467 20m Port 1 Port 2 Outer diameter Number of cores Cable length 8995 3467 01 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 1 m 8995 3467 03 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 3 m 8995 3467 05 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 5 m 8995 3467 07 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 7 m 8995 3467 10 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 10 m 8995 3467 15 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 15 m 8995 3467 20 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 20 m Cable 467 183

Power Focus Options - I/O Expander Port 1 Port 2 Outer diameter Number of cores Cable length cable 467 25m 8995 3467 25 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 25 m cable 467 30m 8995 3467 30 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 30 m I/O Bus cable 0,5m 4222 0917 00 SUB-D 90 Female SUB-D 90 Female 6 mm 8 0,5 m I/O Bus cable 1m 4222 0917 01 SUB-D 90 Female SUB-D 90 Female 6 mm 8 1 m I/O Bus cable 3m 4222 0917 03 SUB-D 90 Female SUB-D 90 Female 6 mm 8 3 m I/O Bus cable 5m 4222 0917 05 SUB-D 90 Female SUB-D 90 Female 6 mm 9 5 m I/O Bus cable 10m 4222 0917 10 SUB-D 90 Female SUB-D 90 Female 6 mm 8 10 m I/O Bus cable 15m 4222 0917 15 SUB-D 90 Female SUB-D 90 Female 6 mm 8 15 m 184

Power Focus Options - I/O Expander - Connectivity 185

Power Focus Options - Selector These selectors are designed for up to 4 or 8 different sockets and are easy to connect to the I/O Bus port on the PF4000 Controller. SCOPE OF SUPPLY: I/O Bus Cable / Adapter Cable 467; 15 m OPTIONS: Extension cables or other cable lengths must be ordered separately. See Accessories POWER FOCUS SELECTOR KIT Selector 4 Kit PF4000 ETX/G 8439 0424 00 Selector 8 Kit PF4000 ETX/G 8439 0424 01 Selector bit Kit PF4000 ETX/G 8439 0424 02 Selector large Kit PF4000 ETX/G 8439 0424 03 Selector 4 Selector 8 Bit Selector 8 POWER FOCUS OPTION SELECTOR Mechanical connection for Selector 8995 7890 04 Retooling selector box to tool size - Selector 4 8995 7894 00 Retooling selector box to the tool size - Selector 8 8995 7894 01 Retooling selector box to the tool size - Selector Bit 8995 7894 02 Retooling selector box to the tool size - Selector large 8995 7894 03 Selector Large 186

Power Focus Options - Selector POWER FOCUS ACCESSORIES SELECTOR All cables with article numbers starting from 8995 3460 xx to 8995 3469 xx are optimized for use in cable chains. Port 1 Port 2 Outer diameter Number of cores Cable length cable 467 1m 8995 3467 01 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 1 m cable 467 3m 8995 3467 03 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 3 m cable 467 5m 8995 3467 05 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 5 m cable 467 7m 8995 3467 07 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 7 m cable 467 10m 8995 3467 10 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 10 m cable 467 15m 8995 3467 15 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 15 m cable 467 20m 8995 3467 20 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 20 m cable 467 25m 8995 3467 25 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 25 m cable 467 30m 8995 3467 30 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 30 m I/O Bus cable 0,5m 4222 0917 00 SUB-D 90 Female SUB-D 90 Female 6 mm 8 0,5 m I/O Bus cable 1m 4222 0917 01 SUB-D 90 Female SUB-D 90 Female 6 mm 8 1 m I/O Bus cable 3m 4222 0917 03 SUB-D 90 Female SUB-D 90 Female 6 mm 8 3 m I/O Bus cable 5m 4222 0917 05 SUB-D 90 Female SUB-D 90 Female 6 mm 9 5 m I/O Bus cable 10m 4222 0917 10 SUB-D 90 Female SUB-D 90 Female 6 mm 8 10 m I/O Bus cable 15m 4222 0917 15 SUB-D 90 Female SUB-D 90 Female 6 mm 8 15 m Cable 467 187

Power Focus Options - Selector - Connectivity Option-Selector PF4000 188

Power Focus Options - Wireless Socket Tray The wireless Socket Tray recognizes the used socket and provides this kind of information via the I/O bus to the Power Focus controller (PF4000). This unit could be used as any other Atlas Copco Socket Tray box. FEATURES: SCOPE OF SUPPLY: REQUIRED EQUIPMENT: Toolbox to be supplied by customer Wireless Socket Tray OPTIONS: Extension cables or other cable lengths must be ordered separately. See Accessories NOTES: Technical data: Power requirements: Feed Voltage: 24 VDC (Base Station) 230V/AC (Charger) Frequency: 50-60 Hz Maximum ambient operating temperature: 50 C / 122 F. Attention: 230 V Power Supply to be supplied from customer 189

Power Focus Options - Wireless Socket Tray POWER FOCUS WIRELESS SOCKET TRAY KIT Wireless Socket 868 MHz 4 Tray Kit PF4000 ETX/G 8439 0424 04 Wireless Socket 868 MHz 6 Tray Kit PF4000 ETX/G 8439 0424 05 Wireless Socket 868 MHz 8 Tray Kit PF4000 ETX/G 8439 0424 06 Wireless Socket 2,4 GHz 4 Tray Kit PF4000 ETX/G 8439 0424 07 Wireless Socket 2,4 GHz 6 Tray Kit PF4000 ETX/G 8439 0424 08 Wireless Socket 2,4 GHz 8 Tray Kit PF4000 ETX/G 8439 0424 09 POWER FOCUS OPTION WIRELESS SOCKET TRAY Mechanical connection for Wireless Socket Tray 8995 7890 38 Retooling selector box to tool size -Wireless Selector 8 8995 7894 06 Retooling selector box to tool size -Wireless Selector 6 8995 7894 05 Retooling selector box to tool size -Wireless Selector 4 8995 7894 04 Removable Battery Wireless Socket 4 Tray 8995 3114 90 POWER FOCUS ACCESSORIES WIRELESS SOCKET TRAY Port 1 Port 2 Outer diameter Number of cores Cable length cable 467 1m 8995 3467 01 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 1 m cable 467 3m 8995 3467 03 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 3 m cable 467 5m 8995 3467 05 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 5 m cable 467 7m 8995 3467 07 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 7 m cable 467 10m 8995 3467 10 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 10 m cable 467 15m 8995 3467 15 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 15 m cable 467 20m 8995 3467 20 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 20 m cable 467 25m 8995 3467 25 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 25 m cable 467 30m 8995 3467 30 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 30 m I/O Bus cable 0,5m 4222 0917 00 SUB-D 90 Female SUB-D 90 Female 6 mm 8 0,5 m I/O Bus cable 1m 4222 0917 01 SUB-D 90 Female SUB-D 90 Female 6 mm 8 1 m I/O Bus cable 3m 4222 0917 03 SUB-D 90 Female SUB-D 90 Female 6 mm 8 3 m I/O Bus cable 5m 4222 0917 05 SUB-D 90 Female SUB-D 90 Female 6 mm 9 5 m I/O Bus cable 10m 4222 0917 10 SUB-D 90 Female SUB-D 90 Female 6 mm 8 10 m I/O Bus cable 15m 4222 0917 15 SUB-D 90 Female SUB-D 90 Female 6 mm 8 15 m Cable 467 190

Power Focus Options - RE-Alarm The Re-alarm is designed to remotely indicate the status of tightenings. It is easy to connect to the I/O Bus port on the Power Focus Controller. SCOPE OF SUPPLY: Cable 467; 15 m OPTIONS: Extension cables or other cable lengths must be ordered separately. See Accessories POWER FOCUS RE-ALARM KIT RE-Alarm Kit PF4000 ETX/G 8439 0426 00 POWER FOCUS OPTION RE-ALARM Mechanical connection for RE-Alarm 8995 7890 06 POWER FOCUS ACCESSORIES RE-ALARM All cables with article numbers starting from 8995 3460 xx to 8995 3469 xx are optimized for use in cable chains. Port 1 Port 2 Outer diameter Number of cores Cable length cable 467 1m 8995 3467 01 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 1 m cable 467 3m 8995 3467 03 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 3 m cable 467 5m 8995 3467 05 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 5 m cable 467 7m 8995 3467 07 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 7 m cable 467 10m 8995 3467 10 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 10 m cable 467 15m 8995 3467 15 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 15 m cable 467 20m 8995 3467 20 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 20 m cable 467 25m 8995 3467 25 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 25 m cable 467 30m 8995 3467 30 SUB-D 90 Female SUB-D 90 Female 8,5 mm 10 30 m I/O Bus cable 0,5m 4222 0917 00 SUB-D 90 Female SUB-D 90 Female 6 mm 8 0,5 m I/O Bus cable 1m 4222 0917 01 SUB-D 90 Female SUB-D 90 Female 6 mm 8 1 m I/O Bus cable 3m 4222 0917 03 SUB-D 90 Female SUB-D 90 Female 6 mm 8 3 m I/O Bus cable 5m 4222 0917 05 SUB-D 90 Female SUB-D 90 Female 6 mm 9 5 m I/O Bus cable 10m 4222 0917 10 SUB-D 90 Female SUB-D 90 Female 6 mm 8 10 m I/O Bus cable 15m 4222 0917 15 SUB-D 90 Female SUB-D 90 Female 6 mm 8 15 m Cable 467 191

Power Focus Options - RE-Alarm - Connectivity 192

Power Focus Options - HMI This HMI touch panel display is pre-installed with the Operator Guidance application, making it possible to interact with the tightening system. It is easy to connect to the I/O Bus port on the Power Focus Controller. SCOPE OF SUPPLY: MiniDisplay MD01 Kit PF4000 ETX/G: MaxiDisplay 19 Kit PF4000 ETX/G: OPTIONS: Extension cables or other cable lengths must be ordered separately. See Accessories NOTES: Attention: 230V Power Supply to be supplied from customer POWER FOCUS HMI KIT MaxiDisplay MiniDisplay MiniDisplay MD01 Kit PF4000 ETX/G 8439 0427 00 MaxiDisplay 19 Kit PF4000 ETX/G 8439 0427 01 POWER FOCUS OPTION HMI Mechanical connection for HMI 8995 7890 07 193

Power Focus Options - HMI POWER FOCUS ACCESSORIES HMI MINI DISPLAY Port 1 Port 2 Outer diameter Number of cores Cable length Lan Adapter Cable 498 1m 8995 3498 01 M12/8 Male RJ45 IP65 6,5 mm 8 1 m Lan Adapter Cable 498 3m 8995 3498 03 M12/8 Male RJ45 IP65 6,5 mm 8 3 m Lan Adapter Cable 498 5m 8995 3498 05 M12/8 Male RJ45 IP65 6,5 mm 8 5 m Lan Adapter Cable 498 7m 8995 3498 07 M12/8 Male RJ45 IP65 6,5 mm 8 7 m Lan Adapter Cable 498 10m 8995 3498 10 M12/8 Male RJ45 IP65 6,5 mm 8 10 m Lan Adapter Cable 498 15m 8995 3498 15 M12/8 Male RJ45 IP65 6,5 mm 8 15 m POWER FOCUS ACCESSORIES HMI MAXI DISPLAY Port 1 Port 2 Outer diameter Number of cores Cable length Lan Adapter Cable 491 1m 8995 3491 01 M12/8 Male RJ45 IP20 6,5 mm 4 1 m Lan Adapter Cable 491 3m 8995 3491 03 M12/8 Male RJ45 IP20 6,5 mm 4 3 m Lan Adapter Cable 491 5m 8995 3491 05 M12/8 Male RJ45 IP20 6,5 mm 4 5 m Lan Adapter Cable 491 6m 8995 3491 06 M12/8 Male RJ45 IP20 6,5 mm 4 6 m Lan Adapter Cable 491 10m 8995 3491 10 M12/8 Male RJ45 IP20 6,5 mm 4 10 m Lan Adapter Cable 491 15m 8995 3491 15 M12/8 Male RJ45 IP20 6,5 mm 4 15 m Lan Adapter Cable 498 Lan Adapter Cable 491 194

Power Focus Options - HMI - Connectivity Option-HMI PF4000 195

Power Focus Options - Scanner The scanner is connected to the Power Focus Controller via the serial port. The up to four scanned ID numbers are merged with the tightening results. Scanned ID s can be used to control PSets or Jobs. It is easy to connect to the Serial port 1/2 on the Power Focus Controller. SCOPE OF SUPPLY: Handheld scanner Kits (Datalogic) consists of: unit 12VDC Stationary scanner Kits (Sick) consists of: length 15m Programming and testing of the Barcode Scanner not included, but quoted according to customer`s specification on request. Scanner PD8330 Scanner PM8330 OPTIONS: Extension cables or other cable lengths must be ordered separately. See Accessories NOTES: Attention: 230V Power Supply to be supplied from customer POWER FOCUS SCANNER HANDHELD KIT Scanner PD8330 kit PF4000 8995 3180 21 Scanner PM8300 cordless kit PF4000 8995 3180 22 Scanner PM8300/D with display cordless kit PF4000 8995 3180 23 Scanner PM8300/DK with display / Keypad cordless kit PF4000 8995 3180 28 2D Scanner PD8530 kit PF4000 8995 3180 25 2D Scanner PM8500 cordless kit PF4000 8995 3180 26 2D Scanner PM8500/D with display cordless kit PF4000 8995 3180 27 Mechanical connection for Scanner PF4000 8995 7890 12 196

Power Focus Options - Scanner POWER FOCUS ACCESSORIES SCANNER HANDHELD CAB-433 RS232 Straight Cable 9-pin female Connector CAB-434 RS232 Coiled Cable - 9-pin female connector Removable Battery Pack M3000 PF4000 Port 1 Port 2 8995 5066 43 - - 8995 5066 44 - - 8995 3180 90 - - Data / Extension Cable 406 1m 8995 3406 01 SUB-D 90 Male Data / Extension Cable 406 3m 8995 3406 03 SUB-D 90 Male Data / Extension Cable 406 5m 8995 3406 05 SUB-D 90 Male Data / Extension Cable 406 7m 8995 3406 07 SUB-D 90 Male Data / Extension Cable 406 10m 8995 3406 10 SUB-D 90 Male Data / Extension Cable 406 15m 8995 3406 15 SUB-D 90 Male POWER FOCUS SCANNER STATIONARY KIT SUB-D 90 Female SUB-D 90 Female SUB-D 90 Female SUB-D 90 Female SUB-D 90 Female SUB-D 90 Female Outer diameter Number of cores Cable length 6,8 mm 4 1 m 6,8 mm 4 3 m 6,8 mm 4 5 m 6,8 mm 4 7 m 6,8 mm 4 10 m 6,8 mm 4 15 m Scanner stationary PF4000 8995 3180 24 POWER FOCUS ACCESSORIES SCANNER STATIONARY Port 1 Port 2 Outer diameter Number of cores Cable length Data Cable 414 1m 8995 3414 01 SUB-D 90 Male open end 6,8 mm 4 1 m Data Cable 414 3m 8995 3414 03 SUB-D 90 Male open end 6,8 mm 4 3 m Data Cable 414 5m 8995 3414 05 SUB-D 90 Male open end 6,8 mm 4 5 m Data Cable 414 7m 8995 3414 07 SUB-D 90 Male open end 6,8 mm 4 7 m Data Cable 414 10m 8995 3414 10 SUB-D 90 Male open end 6,8 mm 4 10 m Data Cable 414 15m 8995 3414 15 SUB-D 90 Male open end 6,8 mm 4 15 m Data / Extension Cable 405 1m 8995 3405 01 SUB-D 90 Male Data / Extension Cable 405 3m 8995 3405 03 SUB-D 90 Male Data / Extension Cable 405 5m 8995 3405 05 SUB-D 90 Male Data / Extension Cable 405 7m 8995 3405 07 SUB-D 90 Male Data / Extension Cable 405 10m 8995 3405 10 SUB-D 90 Male SUB-D 90 Female SUB-D 90 Female SUB-D 90 Female SUB-D 90 Female SUB-D 90 Female 6,8 mm 4 1 m 6,8 mm 4 3 m 6,8 mm 4 5 m 6,8 mm 4 7 m 6,8 mm 4 10 m Data / Extension Cable 405 15m 8995 3405 15 SUB-D 90 Male SUB-D 90 Female 6,8 mm 4 15 m Control Cable 535 3m 8995 3535 03 open end open end 5 mm 5 3 m Control Cable 535 5m 8995 3535 05 open end open end 5 mm 5 5 m Control Cable 535 7m 8995 3535 07 open end open end 5 mm 5 7 m Data Cable 414 CLV430-0010 Control Cable 535 197

Power Focus Options - Scanner Port 1 Port 2 Outer diameter Number of cores Cable length Control Cable 535 10m 8995 3535 10 open end open end 5 mm 5 10 m Control Cable 535 15m 8995 3535 15 open end open end 5 mm 5 15 m Control Cable 530 1m 8995 3530 01 M12/5 Female open end 5 mm 5 1 m Control Cable 530 3m 8995 3530 03 M12/5 Female open end 5 mm 5 3 m Control Cable 530 5m 8995 3530 05 M12/5 Female open end 5 mm 5 5 m Control Cable 530 7m 8995 3530 07 M12/5 Female open end 5 mm 5 7 m Control Cable 530 10m 8995 3530 10 M12/5 Female open end 5 mm 5 10 m Control Cable 530 15m 8995 3530 15 M12/5 Female open end 5 mm 5 15 m Control Cable 531 1m 8995 3531 01 M12/5 Male open end 5 mm 5 1 m Control Cable 531 3m 8995 3531 03 M12/5 Male open end 5 mm 5 3 m Control Cable 531 5m 8995 3531 05 M12/5 Male open end 5 mm 5 5 m Control Cable 531 7m 8995 3531 07 M12/5 Male open end 5 mm 5 7 m Control Cable 531 10m 8995 3531 10 M12/5 Male open end 5 mm 5 10 m Control Cable 531 15m 8995 3531 15 M12/5 Male open end 5 mm 5 15 m POWER FOCUS OPTION SCANNER Mechanical connection for Scanner PF4000 8995 7890 12 Control Cable 530 Control Cable 531 198

Power Focus Options - Scanner - Connectivity Option-Scanner PF4000 199

Power Focus Options - E-Stop Extern The Emergency Stop push button is built into an industrial housing SCOPE OF SUPPLY: OPTIONS: Extension cables or other cable lengths must be ordered separately. See Accessories POWER FOCUS E-STOP EXTERN KIT E-Stop Ext with Connection Start Kit PF4000 ETX/G 8995 3130 41 POWER FOCUS OPTION E-STOP EXTERN Mechanical connection for Emergency Stop Button 8995 7890 10 Control Cable 537 POWER FOCUS ACCESSORIES E-STOP EXTERN Port 1 Port 2 Outer diameter Number of cores Cable length Control Cable 537 1m 8995 3537 01 M12/8 Female open end 5,8 mm 8 1 m Control Cable 537 3m 8995 3537 03 M12/8 Female open end 5,8 mm 8 3 m Control Cable 537 5m 8995 3537 05 M12/8 Female open end 5,8 mm 8 5 m Control Cable 537 7m 8995 3537 07 M12/8 Female open end 5,8 mm 8 7 m Control Cable 537 10m 8995 3537 10 M12/8 Female open end 5,8 mm 8 10 m Control Cable 537 15m 8995 3537 15 M12/8 Female open end 5,8 mm 8 15 m Control / Extension Cable 502 3m 8995 3502 03 M12/8 Male M12/8 Female 5,8 mm 8 3 m Control / Extension Cable 502 5m 8995 3502 05 M12/8 Male M12/8 Female 5,8 mm 8 5 m Control / Extension Cable 502 7m 8995 3502 07 M12/8 Male M12/8 Female 5,8 mm 8 7 m Control / Extension Cable 502 10m 8995 3502 10 M12/8 Male M12/8 Female 5,8 mm 8 10 m Control / Extension Cable 502 15m 8995 3502 15 M12/8 Male M12/8 Female 5,8 mm 8 15 m Cable 502 200

Power Focus Accessories - I/O Bus Cable This cable connects the Operator Panel, Selector, IO Expander, RE-Alarm or Stacklight with the Power Focus System. NOTES: I/O Bus Cable 8995 346x xy POWER FOCUS ACCESSORIES I/O BUS CABLE EXTENSION TYP 460 Port 1 Port 2 Outer diameter Number of cores Cable length I/O Bus cable / Extension cable 460 1m 8995 3460 01 M23/19 Female M23/19 Male 8,5 mm 10 1 m I/O Bus cable / Extension cable 460 3m 8995 3460 03 M23/19 Female M23/19 Male 8,5 mm 10 3 m I/O Bus cable / Extension cable 460 5m 8995 3460 05 M23/19 Female M23/19 Male 8,5 mm 10 5 m I/O Bus cable / Extension cable 460 7m 8995 3460 07 M23/19 Female M23/19 Male 8,5 mm 10 7 m I/O Bus cable / Extension cable 460 10m 8995 3460 10 M23/19 Female M23/19 Male 8,5 mm 10 10 m I/O Bus cable / Extension cable 460 15m 8995 3460 15 M23/19 Female M23/19 Male 8,5 mm 10 15 m POWER FOCUS ACCESSORIES I/O BUS CABLE TYP 467 cable 467 1m 8995 3467 01 cable 467 3m 8995 3467 03 cable 467 5m 8995 3467 05 cable 467 7m 8995 3467 07 cable 467 10m cable 467 15m 8995 3467 10 8995 3467 15 Port 1 SUB-D 90 Female SUB-D 90 Female SUB-D 90 Female SUB-D 90 Female SUB-D 90 Female SUB-D 90 Female Port 2 SUB-D 90 Female SUB-D 90 Female SUB-D 90 Female SUB-D 90 Female SUB-D 90 Female SUB-D 90 Female Outer diameter Number of cores Cable length 8,5 mm 10 1 m 8,5 mm 10 3 m 8,5 mm 10 5 m 8,5 mm 10 7 m 8,5 mm 10 10 m 8,5 mm 10 15 m Cable 467 201

Power Focus Accessories - I/O Bus Cable POWER FOCUS ACCESSORIES I/O BUS CABLE TYP 466 cable 466 1m 8995 3466 01 cable 466 3m 8995 3466 03 cable 466 5m 8995 3466 05 cable 466 7m 8995 3466 07 cable 466 10m 8995 3466 10 cable 466 15m 8995 3466 15 Port 1 SUB-D 90 Female SUB-D 90 Female SUB-D 90 Female SUB-D 90 Female SUB-D 90 Female SUB-D 90 Female POWER FOCUS ACCESSORIES I/O BUS CABLE TYP 465 Port 1 Port 2 Outer diameter Number of cores Cable length M23/19 Female 8,5 mm 10 1 m M23/19 Female 8,5 mm 10 3 m M23/19 Female 8,5 mm 10 5 m M23/19 Female 8,5 mm 10 7 m M23/19 Female 8,5 mm 10 10 m M23/19 Female 8,5 mm 10 15 m Port 2 Outer diameter Number of cores Cable length cable 465 1m 8995 3465 01 SUB-D 45 Female M23/19 Male 8,5 mm 10 1 m cable 465 3m 8995 3465 03 SUB-D 90 Female M23/19 Male 8,5 mm 10 3 m cable 465 5m 8995 3465 05 SUB-D 90 Female M23/19 Male 8,5 mm 10 5 m cable 465 7m 8995 3465 07 SUB-D 90 Female M23/19 Male 8,5 mm 10 7 m cable 465 10m 8995 3465 10 SUB-D 90 Female M23/19 Male 8,5 mm 10 10 m cable 465 15m 8995 3465 15 SUB-D 90 Female M23/19 Male 8,5 mm 10 15 m Adapter Cable 466 Adapter Cable 465 202