More Precision confocaldt // Confocal chromatic measuring system
Confocal high-speed controller up to 70kHz confocaldt 271 HS 70kHz Fastest controller worldwide: Measuring rate up to 70kHz INTER FACE Interfaces: Ethernet / EtherCAT / RS / Analog Fast surface compensation Configuration via web interface Submicrometer resolution Multi-layer thickness measurement Robust design with passive cooling The confocaldt 271 HS controllers are used for fast distance and thickness measurements of highly reflecting and specular surfaces. The controllers are equipped with enhanced optical components enabling measuring rates up to 70kHz on reflecting surfaces without having to use an external light source. The confocaldt HS controllers are considered one of the fastest confocal measuring systems in the world. The active exposure regulation feature for the CCD line enables accurate, fast surface compensation on changing surfaces during dynamic measurement processes. The controller can be operated with any IFS sensor and is available as a standard version for distance measurements or as a multi-peak version for thickness measurements. Due to a user-friendly web interface, the entire configuration process of controller and sensors is carried out without using any additional software. Data output is via Ethernet, EtherCAT, RS or analog output.
2 Controller Multi peak measurement IFC271LED IFC271MP LED 2 peaks up to 6 peaks Light source internal white LED Measuring rate continuously adjustable from 100 Hz to 70 khz Ethernet/EtherCAT Resolution 1 nm RS 18 bit analog 16 bit (teachable) Storage up to calibration tables for different sensors per channel, menu selection Sync-In/Trig-In, Sync-Out Error1-Out, Error2-Out encoder (x A, B, Index) EtherCAT/Ethernet RS analog: current, voltage (16 bit D/A converter) Controller inputs/outputs EtherCAT On/Off switch; button for dark alignment (as well as for reset to factory setting after 10 sec) x LED for intensity, range, status, supply voltage Operating elements, controller display Supply voltage, power consumption 2 VDC ± 15 %, approx. 10 W Material aluminum case for DIN rail mounting Protection class IP0 Temperature range Operation +5... +50 C Storage -... +70 C Permissible ambient light 0,000 lx Shock 15 g, 6 ms Vibration 2 g / 10 Hz... 500 Hz Cable (optical fiber) Connection 2... 50 m Connector E00 EtherCAT, Ethernet Max. cable lengths (all cables are shielded) CAT5E; cable length < 100 m Supply, RS, Sync./error < 0 m analog < 0 m Encoder <m sensor cable (optical fibre) approx. 6 1 R 218 (can be removed) fitting panel for DIN rail 12.8 Controller IFC271 LED 76.2 81.2 0 approx. 75
2 System design confocaldt System design The confocaldt system consists of: Sensor IFS20x Controller IFC2xx Fiber-optic cable IFS sensor Vacuum feed through (optional) EtherCAT, Ethernet RS Controller IFCx IFC251 IFC261 IFC271 HS Power supply Analog output (option) Digital I/O Encoder (option)
25 Customer-specific modifications Application examples are often found where the standard versions of the sensors and the controller are performing at their limits. To facilitate such special tasks it is possible to customize the sensor design and to adjust the controller accordingly. Common requests for modifications include changes in design, mounting options, customized cable lengths and modified measuring ranges. Possible modifications Sensors with connector Cable length Vacuum suitability until UHV Specific lengths Customer-specific mounting options Optical filter for ambient light compensation Housing material Measuring range / offset distance Vacuum setup C200-x / Vac C201-x IFS2xx / Vac Controller IFC2xx Vacuum feed through C205... / Vac (KF or CF flange) C202... / Vac (KF flange)
Accessories 26 confocaldt Accessories: mounting adapter MA202 202 1.5±0.1 ø. ø8.5 11 15 ø H9 12 7.5 M 5.5 Accessories: mounting adapter MA20 20 11. 1.5±0.1.5 18 ø8 12 7.5 M5x0.8 M5x0.8 7.5 2 Accessories: mounting adapter MA200 IFS205/IFS206 (consisting of a mounting block and a mounting ring) Mounting block 0 1 7 2 0 10 10 6 øx 1.5 MA 206- IFS206 ø2 0 6 ø ø2 19.75 MA 200-27 IFS205-0, / -1 0 ø5 7 ø 0 ø7 2 MA 205- IFS205- MA 205-5 IFS205-10 ø5 Mounting ring 8 ø7 ø6 2 6.5 MA 205-62 IFS205-28 / IFS205-0
27 Accessories Software IFD2n1-Tool Free demo software tool included Optical fiber Temperature range : -50 C to 90 C Bending radius: 0/0 mm Accessories light source IFL2/LE Lamp module for IFC2 IFL2x1/LED Lamp module for IFC2x1 IFL251/LED(00) Lamp module for IFC251(00) Multimode core 50 µm / 26 µm Cladding 125 µm Cables for IFS202/IFS20 sensors CE202 cable with 2x E00/APC connectors CE202-x Extension for optical fiber ( m, 10 m,1 m, 0 m, 50 m) CE202-x/PT Optical fiber with protection tube for mechanical stress ( m, 10 m, customer-specific length up to 50 m) Vacuum feed through C202/Vac/KF16 Vacuum feed through with optical fiber, 1 channel, vacuum side FC/APC non-vacuum side E00/APC, clamping flange KF 16 C205/Vac/1/KF16 Vacuum feed through on both sides FC/APC socket, 1 channel, clamping flange type KF 16 C205/Vac/1/CF16 Vacuum feed through on both sides FC/APC socket, 1 channel, flange type CF 16 C205/Vac/6/CF6 Vacuum feed through FC/APC socket, 6 channels, flange type CF 6 Other accessories SC271-x/USB/IND SC271-x/IF08 PS EC271-/OE Connector cable IFC251/61/71, m, 10 m, m Connector cable IFC251/61/71-IF08, m, 10 m, m Power supply 2 V / 2.5 A Encoder cable, m 8,8 Ø6 Ø2 E00/APC standard connector 6 25,5 FC/APC standard connector ø9,5 Cable for IFS207 sensors C20-x Optical fiber with DIN connector and E00/APC (2 m, 5 m) Strain relief PVDF: polyvinylidene fluoride ø2,5 C200 cable with 2x FC/APC connectors C200-x Optical fiber ( m, 5 m, 10 m, customer-specific length up to 50 m) C200/PT-x Optical fiber with protection tube for mechanical stress ( m, 5 m, 10 m, customer-specific length up to 50 m) C200/PT-x-Vac Optical fiber with protection tube suitable for use in vacuum ( m, 5 m, 10 m, customer-specific length up to 50 m) Coating/buffer PVC: polyvinyl chloride,5 DIN connector ø6,8 ø2,5 Cables for IFS205/IFS206 sensors C201 cable with FC/APC and E00/APC connectors C201-x Optical fiber ( m, 5 m, 10 m, customer-specific length up to 50 m) C201/PT-x Optical fiber with protection tube for mechanical stress ( m, 5 m, 10 m, customer-specific length up to 50 m) C201-x (01) Optical fiber core diameter 26 µm ( m, 5 m, 15 m) C201-x(10) Drag-chain suitable optical fiber ( m, 5 m, 10 m) Acrylate <250 µm
Modifications reserved / Y976119-O01098GKE High performance sensors made by Micro-Epsilon Sensors and systems for displacement and position Sensors and measurement devices for non-contact temperature measurement 2D/D profile sensors (laser scanner) Optical micrometers, fiber optic sensors and fiber optics Color recognition sensors, LED analyzers and color inline spectrometer Measurement and inspection systems MICRO-EPSILON Headquarters Koenigbacher Str. 15 996 Ortenburg / Germany Tel. +9 (0) 852 / 168-0 Fax +9 (0) 852 / 168-90 info@micro-epsilon.com www.micro-epsilon.com