Turning Hardinge GS 51MS Turning Center Quotation to: ABMNameAlpha Quotation Number: SOHDocumentOrderInvoice Contact: Contact Name Address: ShipToAddressLine1 ShipToAddressLine2 ShipToAddressLine3 ShipToAddressLine4 ShipToCity1, ShipToState, ShipToCountry Date: Month/Day/Year Prices Valid for 30 Days Your Hardinge Representative Sales Person Name Phone Email Address 1 Address 2 City, State, Zip TURNING MILLING GRINDING WORKHOLDING
www.hardinge.com Machine Summary and Quotation Thank you for taking the time to discuss your machine requirements. After reviewing your needs, we are pleased to present the Hardinge GS 51 Turning Center as a solution to your machining requirements. The GS 51 features Hardinge s unique collet ready spindle allowing better part accuracy and surface finish to be obtained. The machine is available with tailstock, live tooling and sub spindle options allowing for part-complete operations. This machine is also available with a range of options to suit many types of manufacturing i.e.; 3 jaw chuck, part probe, tool probe, thermal stabilization package etc Included Features Hardinge s Unique Collet Ready Spindle Full Machine Documentation Manual Guide 0i (program assist) Environmentally friendly grease lubrication User friendly operators panel Tri-Color Light Tower Hinge Type Chip Conveyor with Interface Arm Type Parts Catcher with Conveyor Sub-Spindle Part Ejector (only on 42/51 models) Air-hose and air-gun Custom Macro B Barfeed Interface Rigid tapping Pendent mounted control color display PCMICA flash card slot Run time/parts counter Tool Kit wrenches and grease gun 16C Sub Spindle Collet Adaptor Available Machine Packages: GS 51 MS - BMT 45 Live Tooling, Sub Spindle GS 51 S -Sub Spindle GS 51 MT - BMT 45 Live Tooling, Servo Tailstock GS 51 T -Tailstock
Machine s Top Plate GS 51 BMT45 Standard Included Utilizes.75" square and up to 1.25" round tooling Machine s Renishaw Part Probe Renishaw Tool Probe (note: When using chucks on both the main and sub-spindle, interference does not allow for use of the tool probe) Thermal Stabilization Package Tri-Color Light Tower Standard Included Chucks Hardinge 8 Sure Grip Chuck Lever Type Hardinge 8 Sure Grip Quick Change Chuck Lever Type Parts Catcher Arm Type Parts Catcher with part conveyor Standard Included 2.05 x 6 (52mm x 150mm) 16C Ejector Stop Assembly (for use with sub spindle and 16C adapter) Standard Included Coolant and Chip Management Chip Conveyor Standard Hinge Type Standard Included Chip Conveyor Scraper Type (small fine chips) 280psi Thru Turret Coolant Spindle Liners Spindle Liner Kit Spindle Liner Bushing (4 required for each bar stock size) Barfeeds Barfeed Interface (Nonmagazine/ Magazine/ Air/Hyd) Standard Included LNS Eco Load Pneumatic Barfeed System ¼ to 2 ½ Capacity Includes 3 pushers, 23 retract LNS Eco Load Barfeed Installation Lexair 6 Mini Rhinobar.125 to 1.625 Capacity Includes 3 Feed tubes in Base Price 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8", 1", 1 1/16", 1 1/8", 1 1/4", 1 3/8", 1 1/2", 1 5/8" Additional Mini Rhinobar Feed Tubes Lexair Barfeed Installation
Machine Specifications Swing Diameter Maximum Swing Over Way Covers Work Capacities Maximum Bar Capacity Maximum Machining Diameter Maximum Machining Length Spindle Maximum Speed Maximum Power Rating (Dual Wound Motor) Torque at Spindle (15min) Spindle Nose Spindle Center Height Spindle Reach Travels and Feedrates Maximum X-Axis Travel Live Tooling BMT Maximum X-Axis Travel Static BMT Maximum Z-Axis Travel Maximum Z-Axis Thrust - Fanuc (1 sec.) Maximum Z-Axis Thrust - Fanuc (1 min.) X-Axis Rapid Traverse Rates Z-Axis Rapid Traverse Rates 18" (457mm) 2 "(51mm) 10.35" (263mm) 16" (406mm) 5000-rpm 24.7-hp (18.5kW) 111 ft-lb (151 Nm) A2-6, 20 C 39.40" (1000mm) 11" (279mm) 5.74" (146mm) 5.66" (144mm) 15.98" (406mm) 4,026lb (17,907N) 1,695lb (7,540N) 1181-ipm (30m/min) 1181-ipm (30m/min) Sub Spindle 16C Collet Adaptation Maximum Speed 6000-rpm Maximum Power Rating 10-hp (7.5kW) Torque at Spindle (15min) 59 ft-lb (80 Nm) Spindle Nose A2-5 Turret Top Plates BMT45 Tooling Top Plate BMT45 bi-directional Square Shank Round Shank Tooling Rotation / Index Time Live Tooling Maximum Speed Maximum Torque Rating 12 station.750 (20mm) 1.250" (32mm).25 / 1 Second 5000-rpm 33.2 ft-lb (45 Nm) Servo Tailstock Morse Taper (no quill needed) MT # 4 Sub Base Travel 15.98 (406mm) Thrust (Max) 779 lbs(3470n) Rapid Feed Rate (Max) 216 ipm / 5.5 M/M Maximum Part Length with Collet 18.32 (465.5mm) Maximum Part Length with Chuck 14.07 (357.5mm)
Machine Specifications cont. Coolant Facilities Coolant Capacity Maximum Pressure Pump Size Pump Rating per min. Accuracy Specifications (ISO 230-2) Overall Axis Repeatability (X, Z) 33 gallon (125 liter) 40 psi (2.8 bar) 1.1 HP 6.8 Gal (26L).0002" /.005mm Power Requirements Volts/Full Load Amps Phase/Hertz Miscellaneous Program Resolution Machine Lubrication Machine Communication Machine Length (w/chip conveyor) Machine Depth Machine Height Approx. Machine Weight Approx. Shipping Weight 75A 60Hz 0.0001" (0.001mm) Grease RS-232-C and PCMCIA Card Capability 134 (2,465mm) 62.25" (3,427 mm) 69.1" (1,755mm) 8,465 lb (3,840 kg) 8,884 lb (4,030 kg) Prices list in USD - Factory installed pricing only
All features, benefits and specifications are subject to change. Hardinge Inc. is not responsible for any typographical errors, omissions or misprints.
Fanuc 0i-TD Control Specifications General 8.4 Color LCD Display Two Interpolating Axis Programmable Resolution -.00001 /.001mm Tool Offset Capability -.0001 /.001mm Tool Geometry and Tool Wear Offsets (64 pair each) Inch/Metric Data Selection by G-Code 1280 Meters (512 KB) Part Program Storage Flash Card Slot Capability (up to 128 MB) Data Input/Output MDI (Manual Data Input) Operation Reader/Punch Interface Connection (RS-232 Software/Hardware) DNC (Remote Buffer) Embedded Ethernet Programming Functions Absolute/Incremental Programming Additional Tool Offsets (64 Pair Total) Additional Custom Macro Variables AI Contour Control Background Editing Blueprint Programming Canned Cycles (Drilling) Chamfer/Corner Rounding Constant Surface Speed Programming Continual Thread Cutting Coordinate System Setting (G50) Custom Macro B Diameter/Radius Programming Extended Part Program Edit (Copy/Replace) Graphic Display Hardinge Safe Start Format Input of Offset Value by Programming (G10) Interpolation (Linear and Circular) Manual Guide 0i (G-code assist) Multiple Repetitive Canned Cycles I (Turning) Multiple Repetitive Canned Cycles II (Pockets) Nano Interpolation Registered Part Programs (200 total) Rigid Tapping Single Block Operation Spare M-Codes (3) Thread, Synchronous Cutting Tool Life Management Tool Nose Radius Compensation Variable Lead Thread Cutting Operation Block Delete Clamp/Unclamp Indicator Light Switch Coolant Control Dry Run Dwell Time Emergency Stop Feedhold Feedrate Override (0 to 150%) Incremental Jog Jog Feed Override (0 to 150%) Machine Lock Manual Pulse Generator (MPG Hand wheel) On-Screen Spindle & Axis Load Meters Stop Rapid Traverse Override (Low-25-50-100%) Single Block Spindle Speed and T-Code Displays on All Screens Spindle Speed Override (50 to 120%) Miscellaneous Alarm Display English Color LCD Display with Full Keyboard French/German, Italian or Spanish On-Screen HELP Functions for Alarms Program Protect Run Time and Parts Counter Self-Diagnosis Function Spindle Lock (Servo) Spindle Orient One Degree Stored Pitch Error Compensation
GS 51 MS Floor Plan Note: Inch/Millimeter measurements shown: A 97.04/2465 B 40.62/1032 C 70.2/1781 D 34/883.8 E 26.3/670 F 37.87/960.2 G 37.27/946.9 H 61.62/1540
Investment Summary for ABMNameAlpha Quote Number: All Prices in: SOHCurrencyCodeFrom Qty UOM Description Unit Price Extended Total Investment: $XXXX