CA Vantage Storage Resource Manager 12.6 1 CA RS 1412 Service List Description Type 12.6 RO70503 U0004 OBC02364/RAIDMNGR PTF RO72043 INCORRECT DISTRIBUTION OF CCS@ZE01 IN PTF RO66104 ** PRP ** RO73719 DICTIONARY UPDATES PTF RO74495 DUPLICATE FIELD WITH MULTI-LEVEL JOIN OBJECT PTF RO74781 STK ACS VOLUMES REPORT IS NOT SHOWING SUBPOOL_ID PTF RO74998 VALUE 99:99:SL IN DELTA OBJECT PTF RO75618 NO ONLINE VOLUMES FOUND FOR POOL= PTF The CA RS 1412 service count for this release is 7
CA Vantage Storage Resource Manager 2 CA RS 1412 Service List for CCTUC60 FMID Service Description Type CCTUC60 RO70503 U0004 OBC02364/RAIDMNGR PTF RO72043 INCORRECT DISTRIBUTION OF CCS@ZE01 IN PTF RO66104 ** PRP ** RO73719 DICTIONARY UPDATES PTF RO74495 DUPLICATE FIELD WITH MULTI-LEVEL JOIN OBJECT PTF RO74781 STK ACS VOLUMES REPORT IS NOT SHOWING SUBPOOL_ID PTF RO74998 VALUE 99:99:SL IN DELTA OBJECT PTF RO75618 NO ONLINE VOLUMES FOUND FOR POOL= PTF The CA RS 1412 service count for this FMID is 7
CA Vantage Storage Resource Manager 12.6 3 CA RS 1412 - PTF RO70503 12.6 RO70503 RO70503 M.C.S. ENTRIES = ++PTF (RO70503) U0004 OBC02364/RAIDMNGR PROBLEM DESCRIPTION: Abend U0004 occurs when creating RAID object OBC02364 for IBM DS8K volumes. SYMPTOMS: The OBC02364 object does not show any data. IMPACT: No data is retrieved for RAID object OBC02364 for IBM DS8K volumes. Vantage terminates. CIRCUMVENTION: None PRODUCT(S) AFFECTED: CA Vantage SRM & CA Vantage GMI Release 12.6 Star Problem(s): VANT 9576 Copyright (C) 2014 CA. All rights reserved. R00147-CTU126-SP1 DESC(U0004 OBC02364/RAIDMNGR). ++VER (Z038) FMID (CCTUC60) PRE ( RO37845 RO47292 RO49806 RO61224 ) SUP ( TR70503 )
CA Vantage Storage Resource Manager 12.6 4 CA RS 1412 - PTF RO72043 12.6 RO72043 RO72043 M.C.S. ENTRIES = ++PTF (RO72043) INCORRECT DISTRIBUTION OF CCS@ZE01 IN PTF RO66104 PRP for PE problem 9489. PROBLEM DESCRIPTION: PTF RO66104 distributes also non CA Vantage module CCS@ZE01. The module should be distributed only through CA Common Services. SYMPTOMS: Module CCS@ZE01 is present in CA Vantage's CCTULOAD library. IMPACT: Obsolete version of module CCS@ZE01 module is used even if the CA Common Services has that module updated. CIRCUMVENTION: None PRODUCT(S) AFFECTED: CA Vantage SRM & CA Vantage GMI Release 12.6 Star Problem(s): VANT 9572 Copyright (C) 2014 CA. All rights reserved. R00171-CTU126-SP1 DESC(INCORRECT DISTRIBUTION OF CCS@ZE01 IN PTF RO66104). ++VER (Z038) FMID (CCTUC60) PRE ( RO29987 RO33557 RO38289 RO47839 RO66104 ) SUP ( AR66104 TR72043 ) ++HOLD (RO72043) SYSTEM FMID(CCTUC60) REASON (DOC ) DATE (14322) COMMENT ( +----------------------------------------------------------------------+ CA Vantage SRM & CA Vantage GMI Release 12.6 +----------------------------------------------------------------------+ *************************** * PUBLICATION * *************************** MESSAGE REFERENCE GUIDE In chapter 6 - General messages - VANnnnnT Messages on page 245 Change message from: VAN1594E ziip API version found %8S. Version %8S required. ziip processing disabled. Reason: The active version of module CCS@ZE01 with alias @ZE01 is not at the required level. The ziip API is distributed on CA Vantage LOADLIB and on CA Common Services. The API on CA Common Services is back leveled. Action: Upgrade CA Common Services or use the API found on CA Vantage LOADLIB. to: VAN1594E ziip API version found %8S. Version %8S required. ziip processing disabled. Reason: The active version of module CCS@ZE01 with alias @ZE01 is not at the required level. The ziip API is distributed on CA Common Services. Action: CA Common Services should be upgraded. ).
CA Vantage Storage Resource Manager 12.6 5 CA RS 1412 - PTF RO73719 12.6 RO73719 RO73719 M.C.S. ENTRIES = ++PTF (RO73719) DICTIONARY UPDATES PROBLEM DESCRIPTION: The VOBJDEFS Dictionary Object Definition object does not provide the Date and time when some objects are created. SYMPTOMS: For some objects, the ObjCreDt and ObjCreTm columns in the VOBJDEFS in Dictionary Object Definition object display the -None value instead of The date and time when the object was created. IMPACT: None. CIRCUMVENTION: PRODUCT(S) AFFECTED: CA Vantage SRM & CA Vantage GMI Release 12.6 Star Problem(s): VANT 9613 Copyright (C) 2014 CA. All rights reserved. R00194-CTU126-SP1 DESC(DICTIONARY UPDATES). ++VER (Z038) FMID (CCTUC60) PRE ( RO29987 RO37005 RO42651 RO59075 ) SUP ( TR73719 )
CA Vantage Storage Resource Manager 12.6 6 CA RS 1412 - PTF RO74495 12.6 RO74495 RO74495 M.C.S. ENTRIES = ++PTF (RO74495) DUPLICATE FIELD WITH MULTI-LEVEL JOIN OBJECT PROBLEM DESCRIPTION: Duplicate field error is reported when opening a JOIN object that has another JOIN object as it's base or candidate object. SYMPTOMS: Cannot open JOIN object that has another JOIN object as it's base or candidate object. IMPACT: JOIN object that has another JOIN object as it's base or candidate object cannot be opened in Windows client. CIRCUMVENTION: Open the problematic object in Demo mode from the Windows Client. Open the View and Output definition and navigate to the node Fields. Unselect all the duplicated fields. Save the object view. Reopen and execute the object. PRODUCT(S) AFFECTED: CA Vantage SRM & CA Vantage GMI Release 12.6 Star Problem(s): VANT 9626 Copyright (C) 2014 CA. All rights reserved. R00202-CTU126-SP1 DESC(DUPLICATE FIELD WITH MULTI-LEVEL JOIN OBJECT). ++VER (Z038) FMID (CCTUC60) PRE ( RO29987 RO48263 ) SUP ( TR74495 ) ++HOLD (RO74495) SYSTEM FMID(CCTUC60) REASON (EXIT ) DATE (14307) COMMENT ( +----------------------------------------------------------------------+ CA Vantage SRM & CA Vantage GMI Release 12.6 SEQUENCE After Apply PURPOSE Renumbering object fields in compound JOINs. USERS Users processing compound JOIN objects by user exit. AFFECTED KNOWLEDGE Creating and manipulating JOIN objects. REQUIRED ACCESS None REQUIRED ************************** * STEPS TO PERFORM * ************************** 1. If you have defined JOIN objects that have another JOIN object as it's base or candidate object and you're processing such compound JOINs by your own user exit / utility, make sure that it was tailored to the new field numbering of such compound JOINs. ).
CA Vantage Storage Resource Manager 12.6 7 CA RS 1412 - PTF RO74781 12.6 RO74781 RO74781 M.C.S. ENTRIES = ++PTF (RO74781) STK ACS VOLUMES REPORT IS NOT SHOWING SUBPOOL_ID PROBLEM DESCRIPTION: 1. When the STK Volumes (VISACSV) object is opened, the Subpool_Id column does not populate. 2. When the Virtual Tape Volumes (VTV) object is opened, the VTSS and MVC1 - MVC4 columns do not populate. SYMPTOMS: The Subpool_Id and Label_Type columns in the STK Volumes (VISACSV) object are empty. The VTSS and MVC(s) columns in the StorageTek VTVs (VISTVTV) object are empty. IMPACT: None. CIRCUMVENTION: None. PRODUCT(S) AFFECTED: CA Vantage SRM & CA Vantage GMI Release 12.6 Star Problem(s): VANT 9582 Copyright (C) 2014 CA. All rights reserved. R00204-CTU126-SP1 DESC(STK ACS VOLUMES REPORT IS NOT SHOWING SUBPOOL_ID). ++VER (Z038) FMID (CCTUC60) PRE ( RO37442 RO42950 RO45515 RO45690 RO47479 RO47839 RO49352 RO50250 RO50333 RO55198 RO56539 RO57625 RO59184 RO59357 RO59615 RO63788 RO65534 RO66049 RO70252 RO71710 RO73383 RO73594 ) SUP ( TR70545 TR74781 ) ++HOLD (RO74781) SYSTEM FMID(CCTUC60) REASON (ACTION ) DATE (14316) COMMENT ( +----------------------------------------------------------------------+ CA Vantage SRM & CA Vantage GMI Release 12.6 SEQUENCE Before Apply PURPOSE Removing obsolete files: - JOB10058 - VOLRPT file USERS All users who have installed a previous version AFFECTED of this APAR KNOWLEDGE CA Vantage SRM customization REQUIRED ACCESS CA Vantage SRM CSI and libraries REQUIRED ************************** * STEPS TO PERFORM * ************************** 1. Remove the JOB10058 job from your system JCL library if the job exists. 2. Delete the VOLRPT file (DSN=CA.VANT.UUI.VOLRPT) if the file exists. SEQUENCE After Apply PURPOSE - Removing the Subpool_Id and Label_Type fields from the VISACSV object - Adding the OBJ10058 object as a replacement of
CA Vantage Storage Resource Manager 12.6 8 CA RS 1412 - PTF RO74781 the VISACSV object - Adding the new OBJ10060 object USERS All users of CA Vantage SRM using Sun StorageTek AFFECTED Tape Libraries (Object: STK Volumes (VISACSV)) All users of CA Vantage SRM using Sun StorageTek Virtual Tape System KNOWLEDGE CA Vantage SRM customization REQUIRED ACCESS CA Vantage SRM CSI and libraries REQUIRED ************************** * STEPS TO PERFORM * ************************** 1. Restart CA Vantage after Apply - recommended or Remove the VANSACS4 and VISACSV modules from the memory using the following commands: F sams,delete,module=vansacs4 F sams,delete,module=o10006vx F sams,delete,module=o10058vx F sams,delete,module=van10058 The modules reload automatically. 2. Copy the STKJOBRE job from the %%SMPPFX%%.CCTUSAMP library to your system JCL library (see your VKGPARMS JCLLIB parameter) and customize the job. 3. Copy the STKJOBVI job from the %%SMPPFX%%.CCTUSAMP library to your system JCL library (see your VKGPARMS JCLLIB parameter) and customize the job. 4. Copy the STK10058 script from the %%SMPPFX%%.CCTUSAMP library to your system script library (see your VKGPARMS SYSTSCR parameter). 5. Copy the STK10060 script from the %%SMPPFX%%.CCTUSAMP library to your system script library (see your VKGPARMS SYSTSCR parameter). Note: If the old version of the VISACSV object is still visible in the Windows Client, follow these steps to refresh the object: 1. Go to CA Vantage Internal Management -> Dictionary -> Object Definitions. 2. Add the following filter: Object INCL VISACSV AND Cur = Y 3. Right-click the VISACSV object and select Actions -> Load Object Defs. The new OBJ10058 object is displayed in the Object Tree after the restart of CA Vantage in the following location: Tape Resource Management -> Robotic Systems -> Sun StorageTek Tape Libraries -> STK Libraries - UUI version -> STK Volumes (VOLRPT) To populate a disk file, click Run_STK10058_Scr in the Actions menu. To display data from a disk file in the object, click Execute. The new OBJ10060 object is displayed in the Object Tree after the restart of CA Vantage in the following location: Tape Resource Management -> Virtual Tape Systems -> Sun StorageTek VSM -> STK VSM - UUI version -> Virtual Tape Volumes (VTVRPT) To populate a disk file, click Run_STK10060_Scr in the Actions menu. To display data from a disk file in the object, click Execute. ). ++HOLD (RO74781) SYSTEM FMID(CCTUC60) REASON (DOC ) DATE (14316)
CA Vantage Storage Resource Manager 12.6 9 CA RS 1412 - PTF RO74781 COMMENT ( +----------------------------------------------------------------------+ CA Vantage SRM & CA Vantage GMI Release 12.6 +----------------------------------------------------------------------+ *************************** * PUBLICATION * *************************** ======== CA Vantage Storage Resource Manager Configuration Guide System Parameters VKGPARMS Parameter Descriptions 0 to D (Inclusive) CHANGE parameter DSNPFX (add the following text): If the DSNPFX value is 1 through 31 characters long, the system uses the value to create the default value of the STKUIPFX parameter. If the DSNPFX value is 32 or more characters long, the value is truncated. See the STKUIPFX parameter. ======== CA Vantage Storage Resource Manager Configuration Guide System Parameters VKGPARMS Parameter Descriptions S to Z (Inclusive) ADD new parameter: STKUIPFX Specifies the common prefix for CA Vantage SRM files that the STK SMCUUUI utility produces as command output. Applies to: Tape Resources Range: 1 to 35 characters Default: (%%DSNPFX(0,31)%%.UUI) ======== CA Vantage Storage Resource Manager Configuration Guide ADD new chapter into chapter Configuring CA Vantage SRM Tape Resource Option Configure for Tape Robotic Systems SYSPROG - Configure the STK SMCUUUI Utility Job to Extract Data Note: Oracle STK Enterprise Library Software version 7.0 or higher is required. To extract data from Sun StorageTek Library for use in CA Vantage, configure the STK SMCUUUI Utility job. The Oracle STK SMCUUUI Utility extracts data from the system and stores the data in a flat file. A CA Vantage object reads this flat file and displays the data. The names of the objects and scripts in the following text are represented by OBJxxxxx and STKxxxxx, where xxxxx represents the object number. To run the STK SMCUUUI Utility job fire a script that submits the STKJOBRE batch job. This batch job allocates the requested data file and runs the SMCUUUI Utility which extracts data to the file. The prefix of the file name is defined by the STKUIPFX system parameter. You can set the parameter value in the CA Vantage parameter file (VKGPARMS). The default value of the STKUIPFX parameter is (%%DSNPFX(0,31)%%.UUI). The suffix of the file name is read from the STKJPARM parameter file that is stored as a member in the //PARMS library concatenation. This suffix must match the suffix that is expected by the relevant OBJxxxxx object. Important! Do not change the file name suffix in STKJPARM parameter file. If the STKJOBRE job is not in your job library (JCLLIB), copy the job from the CCTUSAMP library. To customize the job, follow the instructions at the beginning of the member. If the STKxxxxx script is not in your system script library, copy
CA Vantage Storage Resource Manager 12.6 10 CA RS 1412 - PTF RO74781 the script from the CCTUSAMP library. Optionally, you can automate the STKJOBRE job. To automate the job use the STKxxxxx script to schedule and run the STKJOBRE job as necessary: - Uncomment the PERFORM_EVT_PROC statement in the script. To uncomment the PERFORM_EVT_PROC statement, move the statement one space to the left so that the line begins in position 1. Then, specify an execution date and time. For example: PERFORM_EVT_PROC=ON_DAY=MON,AT_TIME=0100 or - Use the wizard in the Windows Client to set an execution date and time for the script. To refresh the script from disk, issue the following command: F SAMS,AUTO,REFRESH=SYSTEM,STKxxxxx To execute the script on demand, issue the following command: F SAMS,AUTO,FIRE=SYSTEM,STKxxxxx Note: Alternatively, you can use the Run STKxxxxx Scr action from the object menu. To cancel the script on demand, issue the following command: F SAMS,AUTO,CANCEL=SYSTEM,STKxxxxx Structure of the STKJPARM Parameter Member ------------------------------------------ Ensure that the STKJPARM member is stored in the //PARMS library concatenation. The standard library is the CCTUPARM library. The STKJPARM member contains values that are used as variable substitutions in the STKJOBRE and STKJOBVI batch jobs when submitted. These jobs are used by CA Vantage objects displaying Real STK Tape Robotic Systems as well as Virtual STK Virtual Tape Systems. Each row of the STKJPARM member corresponds with one CA Vantage object and contains values that are separated by semi-colons. The row has the following structure: 1. %%RECOBJNM%% Specifies the object name and enables row selection. Limits: 8 characters 2. %%RECCOMND%% Specifies the name of the STK SMCUUUI command and the flat file suffix. Important! Do not change this value. Limits: 8 characters 3. %%RECUUIIN%% Specifies the name of the member in the %%SMPPFX%%.CCTUPARM library. This member is used as the input file for the SMCUUUI Utility (//UUIIN DD). Limits: 8 characters 4. %%RECSPACE%% Specifies the value of the SPACE= parameter for the flat file allocation. Limits: 30 characters Refer to the following sample: ------------------------------ STKJPARM member: ---------------- OBJ10060;VTVRPT ;STKVTVRP;(CYL,(400,100),RLSE) OBJ10058;VOLRPT ;STKVOLRP;(CYL,(10,10),RLSE) Value of parameter %%DSNPFX%%: (CA.VANT) ----------- Value of parameter %%SMPPFX%%: (CA.VANTRG) ----------- Parameter %%STKUIPFX%% is not set. ------------ The STK10058 script contains the following line: ------------------- SUBSTITUTE_JCL=DSN=%%JCLLIB%%,MEMBER=STKJOBRE The STKJOBRE job contains the following step: ----------------
CA Vantage Storage Resource Manager 12.6 11 CA RS 1412 - PTF RO74781 //REPORT EXEC PGM=SMCUUUI,REGION=0M //STEPLIB DD DSN=YOUR.SEA.LINKLIB,DISP=SHR //STDOUT DD SYSOUT=* //CSVOUT DD DSN=%%STKUIPFX%%.%%RECCOMND%%, // DISP=(,CATLG),SPACE=%%RECSPACE%%, // DCB=(RECFM=VB,LRECL=256) //UUIIN DD DSN=%%SMPPFX%%.CCTUPARM(%%RECUUIIN%%), // DISP=SHR After you fire the STK10058 script, the step submitted is: //REPORT EXEC PGM=SMCUUUI,REGION=0M //STEPLIB DD DSN=YOUR.SEA.LINKLIB,DISP=SHR //STDOUT DD SYSOUT=* //CSVOUT DD DSN=CA.VANT.UUI.VOLRPT, // DISP=(,CATLG),SPACE=(CYL,(10,10),RLSE), // DCB=(RECFM=VB,LRECL=256) //UUIIN DD DSN=CA.VANTRG.CCTUPARM(STKVOLRP), // DISP=SHR ======== CA Vantage Storage Resource Manager Configuration Guide ADD new chapter into chapter Configuring CA Vantage SRM Tape Resource Option Configure Virtual Tape Systems Configure for StorageTek VSM SYSPROG - Configure the STK SMCUUUI Utility Job to Extract Data Note: Oracle STK Enterprise Library Software version 7.0 or higher is required. To extract data from Sun StorageTek Library for use in CA Vantage, configure the STK SMCUUUI Utility job. The Oracle STK SMCUUUI Utility extracts data from the system and stores the data in a flat file. A CA Vantage object reads this flat file and displays the data. The names of the objects and scripts in the following text are represented by OBJxxxxx and STKxxxxx, where xxxxx represents the object number. To run the STK SMCUUUI Utility job fire a script that submits the STKJOBVI batch job. This batch job allocates the requested data file and runs the SMCUUUI Utility which extracts data to the file. The prefix of the file name is defined by the STKUIPFX system parameter. You can set the parameter value in the CA Vantage parameter file (VKGPARMS). The default value of the STKUIPFX parameter is (%%DSNPFX(0,31)%%.UUI). The suffix of the file name is read from the STKJPARM parameter file that is stored as a member in the //PARMS library concatenation. This suffix must match the suffix that is expected by the relevant OBJxxxxx object. Important! Do not change the file name suffix in STKJPARM parameter file. If the STKJOBVI job is not in your job library (JCLLIB), copy the job from the CCTUSAMP library. To customize the job, follow the instructions at the beginning of the member. If the STKxxxxx script is not in your system script library, copy the script from the CCTUSAMP library. Optionally, you can automate the STKJOBVI job. To automate the job use the STKxxxxx script to schedule and run the STKJOBVI job as necessary: - Uncomment the PERFORM_EVT_PROC statement in the script. To uncomment the PERFORM_EVT_PROC statement, move the statement one space to the left so that the line begins in position 1. Then, specify an execution date and time. For example: PERFORM_EVT_PROC=ON_DAY=MON,AT_TIME=0100 or - Use the wizard in the Windows Client to set an execution date and time for the script.
CA Vantage Storage Resource Manager 12.6 12 CA RS 1412 - PTF RO74781 To refresh the script from disk, issue the following command: F SAMS,AUTO,REFRESH=SYSTEM,STKxxxxx To execute the script on demand, issue the following command: F SAMS,AUTO,FIRE=SYSTEM,STKxxxxx Note: Alternatively, you can use the Run STKxxxxx Scr action from the object menu. To cancel the script on demand, issue the following command: F SAMS,AUTO,CANCEL=SYSTEM,STKxxxxx Structure of the STKJPARM Parameter Member ------------------------------------------ Ensure that the STKJPARM member is stored in the //PARMS library concatenation. The standard library is the CCTUPARM library. The STKJPARM member contains values that are used as variable substitutions in the STKJOBRE and STKJOBVI batch jobs when submitted. These jobs are used by CA Vantage objects displaying Real STK Tape Robotic Systems as well as Virtual STK Virtual Tape Systems. Each row of the STKJPARM member corresponds with one CA Vantage object and contains values that are separated by semi-colons. The row has the following structure: 1. %%RECOBJNM%% Specifies the object name and enables row selection. Limits: 8 characters 2. %%RECCOMND%% Specifies the name of the STK SMCUUUI command and the flat file suffix. Important! Do not change this value. Limits: 8 characters 3. %%RECUUIIN%% Specifies the name of the member in the %%SMPPFX%%.CCTUPARM library. This member is used as the input file for the SMCUUUI Utility (//UUIIN DD). Limits: 8 characters 4. %%RECSPACE%% Specifies the value of the SPACE= parameter for the flat file allocation. Limits: 30 characters Refer to the following sample: ------------------------------ STKJPARM member: ---------------- OBJ10060;VTVRPT ;STKVTVRP;(CYL,(400,100),RLSE) OBJ10058;VOLRPT ;STKVOLRP;(CYL,(10,10),RLSE) Value of parameter %%DSNPFX%%: (CA.VANT) ----------- Value of parameter %%SMPPFX%%: (CA.VANTRG) ----------- Parameter %%STKUIPFX%% is not set. ------------ The STK10060 script contains the following line: ------------------- SUBSTITUTE_JCL=DSN=%%JCLLIB%%,MEMBER=STKJOBVI The STKJOBVI job contains the following step: ---------------- //REPORT EXEC PGM=SMCUUUI,REGION=0M //STEPLIB DD DSN=YOUR.SEA.LINKLIB,DISP=SHR //STDOUT DD SYSOUT=* //CSVOUT DD DSN=%%STKUIPFX%%.%%RECCOMND%%, // DISP=(,CATLG),SPACE=%%RECSPACE%%, // DCB=(RECFM=VB,LRECL=256) //UUIIN DD DSN=%%SMPPFX%%.CCTUPARM(%%RECUUIIN%%), // DISP=SHR After you fire the STK10060 script, the step submitted is: //REPORT EXEC PGM=SMCUUUI,REGION=0M //STEPLIB DD DSN=YOUR.SEA.LINKLIB,DISP=SHR //STDOUT DD SYSOUT=*
CA Vantage Storage Resource Manager 12.6 13 CA RS 1412 - PTF RO74781 //CSVOUT DD DSN=CA.VANT.UUI.VTVRPT, // DISP=(,CATLG),SPACE=(CYL,(400,100),RLSE), // DCB=(RECFM=VB,LRECL=256) //UUIIN DD DSN=CA.VANTRG.CCTUPARM(STKVTVRP), // DISP=SHR ).
CA Vantage Storage Resource Manager 12.6 14 CA RS 1412 - PTF RO74998 12.6 RO74998 RO74998 M.C.S. ENTRIES = ++PTF (RO74998) VALUE 99:99:SL IN DELTA OBJECT PROBLEM DESCRIPTION: For factory delivered objects, the LastModTm field in the All Summary Objects (GENSUMSL) object and in the All Delta Objects (GENDELTA) object displays incorrect value 99:99:SL. The correct value is 00:00:00. SYMPTOMS: The LastModTm field in All Summary Objects (GENSUMSL) and in All Delta Objects (GENDELTA) displays 99:99:SL. IMPACT: Confusing value in the field "LastModTm" CIRCUMVENTION: None PRODUCTS AFFECTED: CA Vantage SRM r12.6 CA Vantage GMI r12.6 PRODUCT(S) AFFECTED: CA Vantage SRM & CA Vantage GMI Release 12.6 Star Problem(s): VANT 9631 Copyright (C) 2014 CA. All rights reserved. R00205-CTU126-SP1 DESC(VALUE 99:99:SL IN DELTA OBJECT). ++VER (Z038) FMID (CCTUC60) PRE ( RO37497 RO37500 RO42651 RO47834 RO50681 RO54809 RO73594 ) SUP ( RO65497 TR65497 TR74998 )
CA Vantage Storage Resource Manager 12.6 15 CA RS 1412 - PTF RO75618 12.6 RO75618 RO75618 M.C.S. ENTRIES = ++PTF (RO75618) NO ONLINE VOLUMES FOUND FOR POOL= PROBLEM DESCRIPTION: When no online volumes are found in the real-time POOLS object, the following error message displays even though the error did not occur: VAN02053 Pools Init: If LSPACEPO is in warmstart list, POOLS should be too. SYMPTOMS: VAN02053 Pools Init: If LSPACEPO is in warmstart list, POOLS should be too. IMPACT: Invalid error message can cause confusion. CIRCUMVENTION: Use LI mode instead of R mode for the POOLS object in your GOA script. PRODUCT(S) AFFECTED: CA Vantage SRM & CA Vantage GMI Release 12.6 Star Problem(s): VANT 9637 Copyright (C) 2014 CA. All rights reserved. R00210-CTU126-SP1 DESC(NO ONLINE VOLUMES FOUND FOR POOL=). ++VER (Z038) FMID (CCTUC60) PRE ( RO63843 RO65093 RO69906 ) SUP ( RO69044 TR68515 TR68935 TR69044 TR75618 )