SHORT PATTERN FLANGE BALL VALVES 5000 SERIES Jarecki 5000 Series metal seated ball valves with the Phantom Port incorporate the most innovative design in ball valves today. Proven in the field, they provide the tightest shut off fort the longest period of time in rough applications. The 5000 Series is designed to withstand corrosion, pressure surges, and abrasion better than any other valve on the market. Jarecki valves are built for applications in the Pulp and Paper, Petrochemical, Petroleum, Chemical, and Power industries. Two Piece Ball and Stem Allows for effective sealing against back pressure Ease of disassembly and repair Unique Seat Design Guards seat seal from sudden pressure surges provides for long lasting, positive shut-off Tight Shut-Off Class V shut-off is our standard Class VI available upon request One Source Supplier Jarecki produces 1/2" to 24" ball valves Metal and soft seated ball valves Valves in pressure classes 150# to 4500# Supplier of actuation and the required coupling Superior Quality Control On every valve, both a hydrostatic test and a seat leakage test are performed Impressive Stem Design Our stems will withstand high torque in rough applications without shearing. Blow-Out proof design insures workman safety Quick Deliveries Valve Rebuilding Send almost any style or make of valve to our rebuilding department for inexpensive valve repair Jarecki Valves can convert TFE seated ball valves to metal seated ball valves Packing Design Long lasting adjustable packing helps insure a leak free environment Superior packing design protects packing from extrusion and flow media, adding to longer sealing life. Available in Other Materials Per Request
Oversized bolting is used to provide strength to the threepiece body design. Metal to metal contact between the tailpieces and the body, along with a tailpiece locator eliminate piping stresses on the body gasket which lead to leakage. Live loaded packing system keeps compression on stem packing during temperature and pressure cycles Double seal design on most seats along with mate lapped ball and seat set provide tight and reliable shut-off. TESTING Jarecki Valves does not rely on statistics when it comes to valve testing. Every valve that leaves the plant has both a hydrostatic and seat leakage test performed on it. The customer is assured a good valve when it is put in service.
SEAT STYLES G Seal - Graphite Sealed Seat O Seal - Graphite Sealed Seat GRAFOIL GRAFOIL A series of Graphite seal rings behind the metal seat, coupled with a Graphite outer diameter seat seal, prevent media from building up behind the seat. The rings also allow for expansion of the internal valve components in high temperature applications. Temperature Range: 200 to 1200 deg F Application: Steam, Abrasion, High Temperatures, Fine Solids Shut-Off: Class V A double seal design providing both spring loading and excellent sealing capabilities. There is no area for media to build up behind the seat, which prevents the valve from locking up. Temperature Range: -150 to 650 deg F Application: Steam, Abrasion, Low Pressure Differentials, Fine Solids, Emulsions Shut-Off: Class V, Class VI, Bubble Tight P Seat - Spring Loaded T Seat - Reinforced TFE Seat For unidirectional applications. The sealing seat is available as a separate seat ring for reparability, or integral with the tailpiece for high temperature applications. The spring seat OD seal prevents media from building up between the spring and the back of the seat. A glass filled TFE is used typically used for most applications. A metal filled TFE Seat is available for increased abrasion resistance and reduction to cold flow. The metal filled seat is excellent for tight sealing in higher pressure classes without the need of a trunnion mounted valve. Temperature Range: 400 to 1650 deg F Application: Steam, Low Pressure Differentials, High Temperatures Shut-Off: Class V, Class VI, Bubble Tight SPECIFICATIONS Temperature Range: -250 to 450 deg F Application: Steam, Low Pressure Differentials, Emulsions, Nonabrasive Media Shut-Off: Bubble Tight ANSI B16.34 ANSI B16.10 ANSI B16.5 ANSI/FCI 70-2-1976 *NACE MR-01-75 *API 607 *API 598 *MSS-SP-72 *Jarecki Valves Can Comply With The Above Specifications Per Request
5000 SERIES ANSI CLASS 150# 1/2 CF 0.50 0.25 5 CF 3.75 4 1/2-13 NC 2.370 0.500 3/4 CF 0.75 0.50 5 CF 4.62 4 1/2-13 NC 2.750 0.500 1 3.75 1.00 0.75 7 4.33 4.87 4 1/2-13 NC 3.125 0.500 1 1/4 CF 1.25 1.00 8 CF 5.25 4 1/2-13 NC 3.500 0.500 1 1/2 4.62 1.50 1.25 8 4.56 6.12 4 1/2-13 NC 3.870 0.500 2 4.75 2.00 1.50 11 4.68 6.50 4 5/8-11 NC 4.750 0.625 3 5.37 3.00 2.00 15 5.75 7.50 4 5/8-11 NC 6.000 0.625 4 6.50 4.00 3.00 18 7.90 11.00 8 5/8-11 NC 7.500 0.625 6 9.50 6.00 4.00 18 9.88 14.50 8 3/4-10 NC 9.500 0.750 8 12.00 8.00 6.00 18 11.44 16.00 8 3/4-10 NC 11.750 0.750 10 15.50 10.00 8.00 24 14.94 20.00 12 7/8-9 NC 14.250 0.875 12 18.25 12.00 10.00 24 18.44 23.00 12 7/8-9 NC 17.000 0.875 ANSI CLASS 300# 1/2 CF 0.50 0.25 5 CF 3.75 4 1/2-13 NC 2.62 0.500 3/4 CF 0.75 0.50 5 CF 4.62 4 5/8-11 NC 3.25 0.625 1 3.75 1.00 0.75 7 4.33 4.87 4 5/8-11 NC 3.50 0.625 1 1/4 CF 1.25 1.00 8 CF 5.25 4 5/8-11 NC 3.87 0.625 1 1/2 4.62 1.50 1.25 8 4.56 6.12 4 3/4-10 NC 4.50 0.750 2 4.75 2.00 1.50 11 4.68 6.50 8 5/8-11 NC 5.00 0.625 3 5.37 3.00 2.00 15 5.75 8.25 8 3/4-10 NC 6.62 0.750 4 6.50 4.00 3.00 18 7.90 11.00 8 3/4-10 NC 7.87 0.750 6 9.50 6.00 4.00 18 9.88 14.50 8 3/4-10 NC 10.62 0.750 8 12.00 8.00 6.00 18 11.44 16.00 8 7/8-9 NC 13.00 0.875 10 15.50 10.00 8.00 24 14.94 20.00 12 1-8 NC 15.25 1.000 12 18.25 12.00 10.00 24 18.44 23.00 12 1 1/8-8 17.75 1.130
ANSI CLASS 600# 1/2 4.75 0.50 0.25 5 CF 3.75 4 1/2-13 NC 2.62 0.500 3/4 4.88 0.75 0.50 5 CF 4.62 4 5/8-11 NC 3.25 0.620 1 5.25 1.00 0.75 7 4.33 4.88 4 5/8-11 NC 3.50 0.620 1 1/4 CF 1.25 1.00 8 CF 5.25 4 5/8-11 NC 3.88 0.620 1 1/2 CF 1.50 1.25 8 4.56 6.12 4 5/8-11 NC 4.50 0.620 2 6.50 2.00 1.50 11 4.68 6.50 8 5/8-11 NC 5.00 0.620 3 7.37 3.00 2.00 15 5.75 8.25 8 3/4-10 NC 6.62 0.750 4 7.38 4.00 3.00 18 7.90 10.75 8 7/8-9 NC 8.50 0.870 6 10.87 6.00 4.00 18 9.88 14.00 12 1-8 NC 11.50 1.000 8 13.50 8.00 6.00 18 11.44 16.50 12 1 1/8-8 13.75 1.120 10 CF 10.00 8.00 24 14.94 20.00 16 1 1/4-8 17.00 1.250 12 CF 12.00 10.00 24 18.44 22.00 20 1 1/4-8 19.25 1.250 ANSI CLASS 900# 1/2 4.75 0.50 0.25 5 CF 4.63 4 3/4-10 NC 3.25 0.75 3/4 4.88 0.75 0.50 5 CF 4.88 4 3/4-10 NC 3.50 0.75 1 5.25 1.00 0.75 7 4.33 5.13 4 7/8-9 NC 4.00 0.87 1 1/4 CF 1.25 1.00 8 CF CF 4 7/8-9 NC 4.38 0.87 1 1/2 CF 1.50 1.25 8 4.56 CF 4 1-8 NC 4.88 1.00 2 6.50 2.00 1.50 11 4.68 6.50 8 7/8-9 NC 6.50 0.87 3 7.37 3.00 2.00 15 5.75 9.50 8 7/8-9 NC 7.50 0.87 4 8.62 4.00 3.00 18 7.90 11.50 8 1 1/8-8 9.25 1.12 6 12.12 6.00 4.00 18 9.88 15.00 12 1 1/8-8 12.50 1.12 8 CF 8.00 6.00 18 11.44 18.50 12 1 3/8-8 15.50 1.37 10 CF 10.00 8.00 24 14.94 21.50 16 1 3/8-8 18.50 1.37 12 CF 12.00 10.00 24 18.44 24.00 20 1 3/8-8 21.00 1.37 ANSI CLASS 900# 1/2 4.75 0.50 0.25 5 CF 4.75 4 3/4-10 NC 3.25 0.75 3/4 4.88 0.75 0.50 5 CF 5.12 4 3/4-10 NC 3.50 0.75 1 5.25 1.00 0.75 7 4.33 5.88 4 7/8-9 NC 4.00 0.87 1 1/4 CF 1.25 1.00 8 CF 6.25 4 7/8-9 NC 4.38 0.87 1 1/2 CF 1.50 1.25 8 4.56 7.00 4 1-8 NC 4.88 1.00 2 6.50 2.00 1.50 11 4.68 8.50 8 7/8-9 NC 6.50 0.87 3 7.37 3.00 2.00 15 5.75 10.50 8 1 1/8-8 8.00 1.12 4 8.62 4.00 3.00 18 7.90 12.25 8 1 1/4-8 9.50 1.25 6 CF 6.00 4.00 18 9.88 15.50 12 1 3/8-8 12.50 1.37 8 CF 8.00 6.00 18 11.44 19.00 12 1 5/8-8 15.50 1.62 10 CF 10.00 8.00 24 14.94 23.00 16 1 7/8-8 19.00 1.87 12 CF 12.00 10.00 24 18.44 26.50 20 2-8 22.50 2.00