Gas Pressure Regulator HON
|
|
- Diane Robinson
- 6 years ago
- Views:
Transcription
1 Gas Pressure Regulator HON OPERATING AND MAINTENANCE INSTRUCTIONS/ SPARE PARTS EDITION 0/07 Serving the Gas Industry Worldwide
2 Contents page. General Remarks 3. Safety Instructions 3. Special Operating Instructions. Start-up. Shut-down 3. Special Maintenance Instructions 3. Main Valve 3. Screw Torque Figures 3.3 Lubricants. Spare Parts. Spare Parts Drawings.. DN /0 and DN 0/00.. DN 80/0, DN 00/00, DN 0/300 and DN 00/ Spare Parts Lists DN /0 and DN 0/00 DN 80/0 and DN 00/00 DN 00/00 and DN 00/300 Spare Parts for Maintenance p.
3 . General Remarks Every person engaged with installation, supervision, or maintenance of the gas pressure regulator type HON 0 is requested to read the following leaflets and brochures beforehand: - Technical Description contains technical data, measurements, and describes function and design. - General Operating Instructions for Gas Pressure Regulators and Safety Devices - this Honeywell brochure describes installation and operation, and includes general hints on fault finding and repair. - Operation and Maintenance, Spare Parts contains further details on installation and operation of the gas pressure regulator HON 0. Maintenance instructions and the spare part drawings and -lists of the main valve are also included. - The integrated functional elements are described in the corresponding individual leaflets Operation and Maintenance, Spare Parts pilot filter i.e. HON 630 or HON 60 HON Additionally, the relevant national rules and laws have to be strictly observed. (In Germany please refer to the DVGW worksheets G 600, G 9/II, G 9 und G 9). The frequency of periodical maintenance of the gas pressure regulator HON should be determined according to the prevailing conditions and the type and composition of the gaseous medium. Therefore, no fixed maintenance intervals can be prescribed. For Germany: At the beginning we recommend to use the maintenance intervals stated in the DVGW worksheet G 9. Then individual maintenance intervals should be determined for every station. For maintenance all parts are to be cleaned and subjected to a thorough visual inspection. A visual inspection should also occur when the course of operation or functional tests have shown lack of regulating accuracy. Particular care should be given to the checking of sealings and diaphragms, as well as carrying and moving parts. Damaged parts should be replaced by new ones. The item numbers referred to in the maintenance instructions are identical with those of spare parts drawings and spare parts lists. We recommend to keep all parts that are specially marked "W" in the spare parts lists in stock for prompt maintenance availibility. These parts are listed separately on page. Safety symbols Safety symbols include the following key words in these operating instructions symbols explanation! Caution! risk of damaging equipment or environment Note additional information or requirements 0.0 p.3
4 . Special Operating Instructions. Start-up: Close the outlet gate valve. Pressure release in the outlet via the discharge line. When putting the regulator into operation the first time we recommend to turn completely the setpoint springs of both, the pilot HON 630, 60 and the load limiting stage (only valid for the Honeywell pilot HON 630) counter-clockwise. Note!! Caution! Note! Open the start-up valve. The starting valve assures a pressure compensation at the throttling diaphragm. Pressurize slowly. It is important to close the start-up valve again. Adjust the setpoint of the load limiting unit of pilot HON 630 to approximately 0 bar above the outlet pressure value (p a ). Set the outlet pressure to the required value by turning the setpoint adjusting screw clockwise in small steps. The load limiting pressure of the HON 630 increases automatically. Open the outlet gate valve slowly.. Shut-down: Turn the setpoint adjusting screw counter-clockwise in small steps until the gas pressure regulator closes. Close the outlet gate valve slowly. 3. Special Maintenance Instructions 3. Main Valve Because of its easy maintenance construction, only the throttling diaphragm and the noise reducing elements (version with noise reduction) have to be controlled and necessarily replaced by new ones. Prior to dismantling all gas supplied chambers must be depressurised.! Caution! The released throttling diaphragm (6) has to be put into the corresponding seat of the main valve. It is necessary to replace the foam elements (9, from size DN 80/0) for each maintenance. 3. Screw Torque Figures MA in Nm screw size DN item no. /0 0/00 80/0 00/00 0/300 00/ Lubricants element (grease slightly) lubricant HON-part-no. all o-rings, mounting swelling of throttling silicone grease (Tube 0. kg) diaphragm all fixing screws and tube fitting mounting grease p.
5 . Spare Parts Drawings.. DN /0 and DN 0/00 Version without noise reduction Version with noise reduction 3 6 rotation of /9 W 7 E0 M A W 6 3 W 3 A A B B B - B A - A 7 W W W 8/9 E0 E 6/7 M A See screw torque figures stated in table on page! W Parts are to be kept in stock for maintenance 0.0 p.
6 .. DN 80/0, DN 00/00, DN 0/300 and DN 00/300 Version without noise reduction Version with noise reduction 3 W 6 rotation of /9 W 7 W 6 E0 "X" M A 8 9 W 3 M A 0 8 W 3 A A B B "X" Version without noise reduction DN 0/300 and DN 00/300 B - B A - A 7 W W 7 7 W 0 8/9 E0 M A See screw torque figures stated in table on page! W Parts are to be kept in stock for maintenance. E 6/7 0.0 p.6
7 . Spare Parts List.. DN /0 and DN 0/00 item no. description quant. body: PN 0 GS ANSI 300 RF GS ANSI 300 RJ GS ANSI 600 RF GS ANSI 600 RJ GS PN 0 / ANSI 600 RF GS ANSI 300 RF / ANSI 600 RF GS lower diaphragm plate LM O-ring W insert NSt drilled expansion piece LM diaphragm W sealing ring W LM cap nut St compression joint St nozzle St pressure spring NFSt diaphragm cover St/LM ring bolt St cylinder screw St diaphragm plate LM cylinder screw 0 St cylinder screw St drilled expansion piece LM metal foam ring St supporting ring LM closing screw St nozzle St cap nut St compression joint St safety washer St W material HON part number DN /0 DN 0/00 W Parts are to be kept in stock for maintenance material key St... steel NSt... stainless steel FSt... spring steel NFSt... stainless spring steel GS... steel cast GGG... spher. graphite cast iron GZn... zink cast GBz... brass cast LM... light metal Ms... brass Cu... copper Bz... bronze GLM... light metal cast GMs... brass cast AlBz... aluminium bronze SSt... K FP... FPM... FP... PGL... foam material plastic material rubber like plastic material rubber like plastic material with special coating rubber like plastic material special plastic material plexiglass 0.0 p.7
8 .. DN 80/0 and DN 00/00 item HON part number no. description quant. W material DN 80/0 DN 00/00 body: PN 0 GS ANSI 300 RF GS ANSI 300 RJ GS ANSI 600 RF GS ANSI 600 RJ GS PN 0 / ANSI 600 RF GS ANSI 300 RF / ANSI 600 RF GS lower diaphragm plate LM O-ring W insert NSt drilled expansion piece LM diaphragm W sealing ring W LM cap nut St compression joint St nozzle St pressure spring NFSt diaphragm cover St/LM ring bolt St foam plate W SSt cylinder screw St diaphragm plate LM cylinder screw St foam ring W SSt cylinder screw St drilled expansion piece LM metal foam ring St supporting ring LM closing ring St nozzle St cap nut St compression joint St safety washer St p.8
9 ..3 DN 0/300 and DN 00/300 pos.- HON part number no. description quant. W material DN 0/300 DN 00/300 body PN 0 GS ANSI 300 RF GS ANSI 300 RJ GS ANSI 600 RF GS ANSI 600 RJ GS PN 0 / ANSI 600 RF GS ANSI 300 RF / ANSI 600 RF GS lower diaphragm plate LM O-ring W insert NSt drilled expansion piece St diaphragm W sealing ring W LM cap nut St compression joint St nozzle St pressure spring NFSt diaphragm cover St/LM ring bolt St foam plate W SSt cylinder screw St diaphragm plate LM cylinder screw 30 St foam ring W SSt cylinder screw St drilled expansion piece St metal foam ring St supporting ring LM closing screw St nozzle St cap nut St compression joint St safety washer St p.9
10 .3 Spare Parts for Maintenance item no. description quant. material DN /0 HON part number DN 0/00 3 O-ring diaphragm sealing ring LM item no. description quant. material DN 80/0 DN 00/00 3 O-ring diaphragm sealing ring LM foam plate SSt foam ring SSt item no. description quant. material DN 0/300 DN 00/300 3 O-Ring diaphragm sealing ring LM foam plate SSt foam ring SSt p.0
11 For More Information To learn more about Honeywell s Advanced Gas Solutions, visit or contact your Honeywell account manager GERMANY Honeywell Process Solutions Honeywell Gas Technologies GmbH Osterholzstrasse 33 Kassel, Germany Tel: +9 (0) Fax: +9 (0) HON Honeywell International Inc.
RH 658 L, 658 LS, 658 L-01
RH 658 L, 658 LS, 658 L0 Spare parts list Rock drills 00 Atlas Copco Construction Tools AB No. 9800 08 0 000609 RH 658 L, 658 LS, 658 L0 Contents Contents General information................................................................
More information656 W. Spare parts list. Pusher leg rockdrills Atlas Copco Construction Tools AB No a
RH 656 W Spare parts list Pusher leg rockdrills 00 Atlas Copco Construction Tools AB No. 9800 0690 0a 00-05-0 RH 656 W Contents Contents General information................................................................
More informationRSK. Wafer Type Check Valve. Construction. Features. Advantages
Wafer Type Check Valve Construction The GEMÜ wafer type check valve is available in plastic or metal and the body, disc and seal can be chosen from various materials. The valve is clamped between two flanges
More informationUniversal Tristop Cylinder for Cam Brakes
Tristop for Cam Brakes 3rd Edition This publication is not subject to any update service. New versions are available in INFORM at www.wabco-auto.com Copyright WABCO 2006 Vehicle Control Systems An American
More informationPressure reducing valve. Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI
Pressure reducing valve in straightway form NPS 1-6 Pressure reducing valve Pressure regulating valve, straight through with diaphragm actuator DMA Actuator with rolling diaphragm Cast steel Fig. 701 Page
More informationWAFER TYPE BUTTERFLY VALVE Z 011-A
WAFER TYPE BUTTERFY VAVE Z 0-A TECNICA DATA Nominal diameter: Face-to-face: EN Series (DIN 0 T3 ) ISO Series API 0 Table BS Series Flange accommodation: DIN PN // ANSI B., Class MSS SP Class AWWA C AS
More informationPIONJÄR. Spare parts list. Petrol drills and breakers 120, 120 AV, 121 A, 130, 130 AV, 131 A
PIONJÄR 0, 0 AV, A, 0, 0 AV, A Spare parts list Petrol drills and breakers 0 Atlas Copco Construction Tools AB 00 00 0b 00 PIONJÄR 0, 0 AV, A, 0, 0 AV, A Contents Contents General Information................................................................
More informationPressure reducing valve. Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI
Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI Pressure reducing valve ARI-PREDU - ANSI Pressure regulating valve, straight through with diaphragm actuator DMA Actuator with rolling
More informationItem 620A Multi-Way Sanitary Ball Valve
R Item 0A Multi-Way Sanitary Ball Valve 00 WOG/ PN : /"-" SPECIFICATION * Body & end caps quality investment casting * Regulation (EC) No. / 00; (EU) 0/0 * Available in stainless steel or carbon steel
More information1.2 Z 014-A LUG TYPE BUTTERFLY VALVE Z 014-A TECHNICAL DATA
UG TYPE BUTTERFY VAVE Z 04-A ug type butterfly valve with threaded holes. This type enables the one-sided lugging of pipes. TECNICA DATA Nominal diameter: 00 ( only PN0/) Face-to-face: EN Series (DIN T
More informationWafer Type Butterfly Valve
Rev.B Wafer Type Butterfly Valve Type Summary Butterfly valve actuator type Actuator Type Description Rated Output Force Supply* Control/ Feedback Signal Running Time Weight kg TBV-50-X.V Proportional
More information1.1 Z 011-A WAFER TYPE BUTTERFLY VALVE Z 011-A TECHNICAL DATA
WAFER TYPE BUTTERFY VAVE Z 0-A TECNICA DATA A universally applicable wafer type valve acc. to EN 3. The large variety of basic materials allows applications in different industries. Nominal diameter: (
More informationDouble solenoid valve Combined pressure regulator and safety valves Servo pressure regulator MBC-...-SE DN 65 - DN 100
Double solenoid valve Combined pressure regulator and safety valves Servo pressure regulator MBC-...-SE DN 5 - DN 00 7. Printed in Germany Edition 0. Nr. Technical Description The DUNGS multiple actuator
More informationWAFER PATTERN BUTTERFLY TYP Z 011-A
WAFER PATTERN BUTTERFY TYP Z 0-A TECNICA DATA A universally applicable wafer type valve acc. to EN 3. The large variety of basic materials allows applications in different industries. Nominal diameter:
More informationDouble solenoid valve Combined pressure regulator and safety valves Servo pressure regulator MBC-...-SE DN 65 - DN 125
Double solenoid valve Combined pressure regulator and safety valves Servo pressure regulator MBC-...-SE DN - DN 7. Printed in Germany Rösler Druck Edition 0.0 Nr. Technical Description The DUNGS multiple
More informationRD 100. Spare parts list. RD 100 s/n BES Construction Tools PC AB No
RD 100 Spare parts list RD 100 s/n BES100496 2018 Construction Tools PC AB No. 9800153901 2018-10 General information This spare parts list applies to the following: Part number 8311030410 RD 100 Description
More informationSB 202. Spare parts list Hydraulic breakers. SB 202 s/n BES Construction Tools PC AB No
SB 202 Spare parts list Hydraulic breakers SB 202 s/n BES051618 2018 Construction Tools PC AB No. 9800172001 2018-01 General information This spare parts list applies to the following: Part number 8460030050
More informationData is only for informational purpose. All specifications are subject to change without notice.
MV Data is only for informational purpose. All specifications are subject to change without notice. 1 First in knife gate 2018-12-19 solutions issue 24 Knife gate valve MV Stafsjö s knife gate valve MV
More informationRadiator Lockshield Valves ADN.. AEN..
07 EN - Straight version ADN.. Angle version AEN.. ACVATIX TM Radiator Lockshield Valves ADN.. AEN.. for -pipe heating systems Valve bodies made of brass, mat nickel-plated DN 0, DN and DN 0 Integrated
More information1.7 Z 414-A LUG TYPE BUTTERFLY VALVE Z 414-A.
LUG TYPE BUTTERFLY VALVE -A TECHNICAL DATA Nominal diameter: da ( ) - da ( ) (SDR ) da ( ) - da ( ) (SDR (SDR / SDR, / SDR ) Face-to-face: EN 55 Series (DIN 32 T3 K1) ISO 5 Series API 09 Table 1 BS 55
More informationCOBRA. Spare parts list. Petrol drills and breakers COMBI Atlas Copco Construction Tools AB No c
COBRA COMBI Spare parts list Petrol drills and breakers 0 Atlas Copco Construction Tools AB 00 0 0c 00 COBRA COMBI Contents Contents General information................................................................
More information3", 4", 6" & 8" Model H Series Alarm Check Valve Installation and Maintenance Guide
", ", " & " Model H Series Alarm Check Valve Installation and Maintenance Guide 077 AIRPARK DRIVE STANDISH, MICHIGAN PHONE 99-- 00-2-0 FAX 99--92 www.globesprinkler.com JUNE C- BULLETIN A.C.V.I.M., REV.
More informationISO*STAR (SXE, SXP) 5/2 & 5/3 Solenoid and pilot actuated glandless spool valves
*STR (SX, SXP) / & / > > Sub-base mounted, 99- s, or > > Specially coated glandless spool and sleeve for long trouble-free life > > Integral flow regulators available on and s for cylinder speed control
More informationSpare Parts List Hydraulic Hammer. HM 720 Eco (V)
Spare Parts List Hydraulic Hammer HM 720 Eco (V) Pt. Id. No. 3361 8557 11 Valid from: 09/2003 GB Spare Parts List Hydraulic Hammers HM 720 Eco HM 720 Eco V E Atlas Copco Construction Tools GmbH Atlas
More informationType. Facts. 441, 442 Full nozzle DIN. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441, 442 DIN Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 468.01-E DIN, ANSI 40 Cap H2 19 Lock nut 18 Adjusting screw with bushing 16 Upper spring plate 12
More informationFeatures: Quality Testing and Documentation
1 The Yokogawa Falcon Series Dual Chamber Orifice Assembly YFOM-DC, is suitably designed for on-line retraction and inspection of orifice plates in process full flow and pressure conditions. The orifice
More informationLH 700. Spare parts list. Forward and reversible plate. Valid from serial number. LH 700 Hatz Electric start 810 mm Bio
Forward and reversible plate Hatz Electric start 0 mm Hatz Electric start 0 mm Bio Hatz Electric start mm Bio Valid from serial number 0000 0000 0000 Contents Contents General information.....................................................................................................................................
More informationselection of special materials is available to handle almost any fluid.
For Pressure Transmitters and Bourdon Tube Pressure Gauges Types 839 X Chemical Seals for Various Applications Advantages / Benefits Separation of medium and measuring device in difficult applications
More informationLH 700. Spare parts list. Forward and reversible plate. Valid from serial number. LH 700 Hatz Electric start 810 mm Bio
LH 00 Spare parts list Forward and reversible plate LH 00 Hatz Electric start 0 mm LH 00 Hatz Electric start 0 mm Bio LH 00 Hatz Electric start 0 mm LH 00 Hatz Electric start 0 mm Bio Valid from serial
More informationCatalogue 2016 HOSE TECHNOLOGY. Fittings, Valves and Accessories. Schauenburg Hose Technology Group
Catalogue 2016 HOSE TECHNOLOGY Fittings, Valves and Accessories Schauenburg Hose Technology Group PREAMBLE The new fittings and accessories range of APD Petzetakis Schlauchtechnik GmbH Quality and reliability
More informationM.R.P. Dt
M.R.P LIST Dt. 13.09.2013 "ZOLOTO " Bronze Globe Valve (Screwed). 1001. 8mm 10mm 15mm 20mm 25mm 32mm 40mm 50mm 65mm 80mm 100mm 416.00 416.00 416.00 601.00 791.00 1305.00 1723.00 2513.00 4308.00 7174.00
More informationButterfly Control Valve. DMK/6 Series
Butterfly Control Valve DMK/6 Series UL Listed for US and Canada UL 842 and ULc C125 & C842 File # MH 18741 Models DMK 707/6 (3/4 NPT) DMK 710/6 (1 NPT) DMK 712/6 (1 1/4 NPT) DMK 715/6 (1 1/2 NPT) DMK
More informationB34 SR & SN Medium Duty Commercial&Industrial Regulator
Product Bulletin KG IMAC Systems, Inc. 90 Main Street, PO Box 0 Tullytown, PA 9007 Tel. -800-9-GAS () 9-00 Fax:() 9-98 www.imacsystems.com B SR & SN Medium Duty Benefits Economical Space-saving design
More informationBalancing valve PN 16 and PN 25 DN
STAF, STAF-SG Balancing valve PN and PN DN 0-00 Pressurisation & Water Quality Balancing & Control Thermostatic Control ENGINEERING ADVANTAGE A flanged, cast iron (STAF) and ductile iron (STAF-SG) balancing
More informationVolare [Borg Warner/Marvel Schebler/Facet/Precision] Carburetor Service Letters & Bulletins
Volare [Borg Warner/Marvel Schebler/Facet/Precision] Carburetor Service Letters & Bulletins Obsolete Recurring SB MA-3A MA-3PA Volare [Borg Warner/Marvel Schebler/Facet/Precision]Carburetor SBs AA MA-5AA
More information1.4 F 012-A DOUBLE FLANGED BUTTERFLY VALVE F 012-A TECHNICAL DATA
DOUBE FANGED BUTTERFY VAVE F 01-A TS-version (through-going shaft) TECNICA DATA Nominal diameter: 0 1 Face-to-face: EN Series ISO Series API 0 Table C BS 1 short NF E -30.1 Flange accommodation: DIN 01
More informationEmergency Luminaire for Fluorescent Lamps Series EXLUX 6009
> As wall, ceiling and pendant light fitting or pole mounted light fitting > Version with 2 lamps: 18 W and 36 W > Central locking > All-pole disconnection via N/C switch when opening light fitting or
More informationContact Dial Thermometers
Data sheet 6852 Page 1/11 Contact Dial Thermometers FL 21 Special features Class 1.5 Display range -4 C to +6 C Temperature controller with actual value display as built-in or add-on device in a stainless
More informationSB 302. Spare parts list. Hydraulic breakers. Valid from serial number Atlas Copco Construction Tools AB No f
SB 0 Spare parts list Hydraulic breakers SB 0 Valid from serial number BES 0 Atlas Copco Construction Tools AB No. 900 0 0f 0 SB 0 Contents Contents General information................................................................
More informationGrease Guns PRELIxx and PRELIxx PRO
Grease Guns PRELIxx and PRELIxx PRO 2014.1 Quality that leads Different grease gun colors for different grease types 03 Grease Guns PRELIxx and PRELIxx Pro 2014.1 Contents Contents PRELIxx 2014.1 Technical
More informationTECHNICAL BULLETIN. Kämmer ColdFlow A Low temperature Control Valve. Experience In Motion FCD KMENTB /17
TECHNICAL BULLETIN Kämmer ColdFlow - 041000A Low temperature Control Valve FCD KMENTB4114-00 11/17 Experience In Motion Index 1. Introduction 2. Features and Benefits 3. Specification 4. Trim Design 5.
More informationThermal Mass Flowmeter Sensyflow FMT200-D
Data Sheet Thermal Mass Flowmeter Sensyflow FMT200-D Direct measurement of mass flow or standard volume flow of compressed air, nitrogen and biogas independent of media pressure and temperature Wide measuring
More informationOld documentation - Only for your information! Product is not available anymore!
Double solenoid valve Control and safety combination valve Servo pressure controller - / 7. Printed in Germany Rösler Druck Edition 0.08 Nr. 09 8 Technical description The DUNGS multiple actuator DMV-SE...
More informationHERZ STRÖMAX GM/GML/GR STRÖMAX-GM/GML Circuit Control Valve with test points STRÖMAX-GR Circuit Control Valve Data sheet STRÖMAX GM/GML/GR, Issue 0215
HERZ STRÖMAX 7GM/GML/GR HERZ STRÖMAX GM/GML/GR STRÖMAX-GM/GML Circuit Control Valve with test points STRÖMAX-GR Circuit Control Valve Data sheet STRÖMAX GM/GML/GR, Issue 0 H Rp L SW L L Dimensions in mm
More informationDIP. Spare parts list. Centrifugal pumps 25, 25-US, 35, 35-US, 65, 65-US Atlas Copco Construction Tools AB No c
DIP 5, 5US, 35, 35US, 65, 65US Spare parts list Centrifugal pumps 0 Atlas Copco Construction Tools AB No. 9800 5 0c 003 DIP 5, 5US, 35, 35US, 65, 65US Contents Contents General information................................................................
More informationHST -TZ1 Guard-locking mechanism (Translation of Original Manual)
Installation and Operating Manual for Components HST -TZ1 Guard-locking mechanism (Translation of Original Manual) HST-TZ1 Ident.-No.: 10234 HST-TZ1 Ident.-No.: 10236 HST-TZ1 Ident.-No.: 10235 HST-TZ1
More informationHST -M2 Switching element with locking mechanism (Translation of Original Manual)
Installation and Operating Manual for Components HST -M2 Switching element with locking mechanism (Translation of Original Manual) HST-M2 Ident.-No.: 10214 HST-M2 Ident.-No.: 10626 HST-M2 Ident.-No.: 10218
More informationTEX. Spare parts list. Handheld pneumatic pick hammers 03PS Atlas Copco Construction Tools AB No
TEX 0PS Spare parts list Handheld pneumatic pick hammers 0 Atlas Copco Construction Tools AB No. 9800 0976 0 004 TEX 0PS Contents Contents General information................................................................
More informationSB 52. Spare parts list. Hydraulic breakers Atlas Copco Construction Tools AB No e
SB Spare parts list Hydraulic breakers 0 Atlas Copco Construction Tools AB No. 900 09 0e 00 SB Contents Contents General information................................................................ Spare
More informationEC 60T. Spare parts list. Hydraulic breakers. EC 60T s/n BES Construction Tools PC AB No
EC 60T Spare parts list Hydraulic breakers EC 60T s/n BES095068 2018 Construction Tools PC AB No. 9864001001 2018-02 Service, repair and wear part kits Label kit 1 Seal kit 3 Mechanical Hydraulic breaker
More information8 Submersible Motors Standard
Applications These motors are built for dependable operation in vertical 8 diameter or larger water wells. Basic Features Double Flanged NEMA mounting design Stainless steel splined shaft StatorShield
More informationSB 152. Spare parts list. Hydraulic breakers Atlas Copco Construction Tools AB No f
SB Spare parts list Hydraulic breakers 0 Atlas Copco Construction Tools AB No. 900 00 0f 00 SB Contents Contents General information................................................................ Spare
More informationOperation Manual. Capacitor Boxes adjustable 80 A / 125 A Track, 2,04 μf to 8 μf. Order Number
Order Number 91008-210-3088444 Capacitor Box 80 A adjustable 2,04 μf to 2,72 μf 91008-210-3088445 Capacitor Box 80 A adjustable 3 μf to 8 μf 91012-210-3101180 Capacitor Box 125 A adjustable 2,04 μf to
More informationSpraying device LD/U2E Arc spraying. Parts List PL EN 02
Arc spraying Parts List PL 9697 EN 02 Oerlikon Metco 6/2015 Oerlikon Metco AG Switzerland Rigackerstrasse 16 CH-5610 Wohlen +1 56 618 81 81 +1 56 618 81 00 www.oerlikon.com/metco i Warranty Disclaimer
More informationITB THROTTLE WITH INTEGRATED STEPPER MOTOR INSTALLATION INSTRUCTION
ITB THROTTLE WITH INTEGRATED STEPPER MOTOR INSTALLATION INSTRUCTION MOTORTECH Gas Engine Accessories P/N 01.50.014 Rev. 12/2014 Copyright Copyright 2014 MOTORTECH GmbH. All rights reserved. Distribution
More informationClose-coupled centrifugal pumps
CombiBloc Close-coupled centrifugal pumps CombiBloc CombiBloc is the premier solution for pumping clean thin liquids in a very cost-effective way. The pump is part of Johnson Pump s Combi-system, a modular
More informationAssembly and Maintenance
Assembly and Maintenance Assembly and Maintenance Test Pumps Pressure Test Pumps Tests all types of installations such as heating, compressed air and refrigeration systems, oil installations, fire lines
More informationHST -TS1 Guard-locking mechanism (Translation of Original Manual)
Installation and Operating Manual for Components HST -TS1 Guard-locking mechanism (Translation of Original Manual) HST-TS1 Ident.-No.: 10250 HST-TS1 Ident.-No.: 10252 HST-TS1 Ident.-No.: 10251 HST-TS1
More informationBlock diagram MB-VEF
0 0 Functional description Gas flow. If the valves and are closed, chamber a is under input pressure up to the double seat of valve.. A hole in the filter housing of MB-.../0 connects min. pressure switch
More informationSTAF, STAF-SG, STAF-R, STAG
STAF, STAFSG, STAFR, STAG Balancing valves 0. Technical description Applications: STAF, STAFSG, STAG: Heating and cooling systems STAFR: Heating and cooling systems Tapwater systems Functions: Balancing
More informationSMD 1B / SMD 2 / SMD 3 flow meters
1-3021-EN Modular design for oil circulating lubrication systems with gearwheel-type flow indicator and bypass system SMD 1B SMD 2 SMD 3 Example of SMD in a stainless steel cabinet Application Flow meters
More informationCool Drawer Dual Sensor
The Cool Drawer Dual Sensor is designed for use in critical processes where it is desirable to have a second crystal in the vacuum chamber. Water cooled, cast stainless steel sensor body, two Cool Drawer
More informationCombi-System. Composition pipe Copipe
Combi-System Composition pipe Copipe no. Composition pipe Copipe white rolls DN 10 x 2.0 mm length per roll 50 m 150 10 54 length per roll 100 m 150 01 54 length per roll 200 m 150 02 54 DN 12 16 x 2.0
More informationSADDLES & SNAP-ON SADDLES
SADDES & SAP-O SADDES When Assembling Spears Saddles to PVC pipe, Spears anufacturing Company recommends Spears PVC-19 Solvent Cement and Spears Primer-68/Primer-70 or equivalent. Although good connections
More informationDN100 (4") - DN500 (20") Hot Tappings
DN00 (4") - DN500 (20") Hot Tappings TONISCO B40 Hot Tapping Machine is versatile and easy to operate. It has a full range capability of setting valves DN00 DN500 by completing it with proper adapters.
More informationTEX 07PE. Spare parts list. Handheld pneumatic pick hammers. Valid from serial number
TEX 07PE Spare parts list Handheld pneumatic pick hammers TEX 07PE TEX 07PE FSH Valid from serial number 0009 0009 0 Atlas Copco Construction Tools AB No. 9800 08 0a 0005 TEX 07PE Contents Contents General
More informationTitle page. GES R2 floor sockets. 08 UFS GESR2 2016_mit Produkte / en / 07/11/2016 (LLExport_04391) / 07/11/2016. System information
Title page GES R2 floor sockets 08 UFS GESR2 206_mit Produkte / en / 07//206 (LLExport_0439) / 07//206 System information GES R2 floor sockets The round floor sockets of the GES R2 series supply data and
More informationVAREC 221 SERIES EMERGENCY PRESSURE RELIEF MANWAY COVERS
VAREC SERIES EMERGENCY PRESSURE RELIEF MANWAY COVERS The Series is designed to provide emergency venting of low pressure storage tanks and vessels FEATURES P PV Available in emergency pressure only and
More informationHST -M1 Switching element with locking mechanism (Translation of Original Manual)
Installation and Operating Manual for Components HST -M1 Switching element with locking mechanism (Translation of Original Manual) HST-M1 Ident. No.: 10213 HST-M1 Ident. No.: 10219 HST-M1, pictured Ident.
More informationGB MIX COMUNICAZIONE - MI. Digital Electro-pneumatic Regulator ER Series
GB MIX COMUNICAZIONE MI Digital Electropneumatic Regulator Series N E W w w w. c a m o z z i. c o m Digital Electropneumatic Regulator Series Port G/ SPECIFICATIONS XXX SPECIFICATIONS XXX ITEM // X P X
More informationBottom Loading & Recirculation Adapters
SM6958 March 2010 Aerospace Group Conveyance Systems Division Carter Brand Ground Fueling Equipment Applicable additional manuals: None Maintenance & Repair Manual Bottom Loading & Recirculation Adapters
More informationSensor Wafer MUT 1000 EL DS120-1-ENG
Electromagnetic Flowmeter dg: www.oryana.com.ar NEW Sensor Wafer MUT 1 EL DS12-1-ENG 1 / 1 Sensor MUT 1 EL MUT 1 EL sensors represent the state of the art of EUROMAG INTERNATIONAL production for water
More informationLCD 500,1500. Spare parts list. Handheld core drills. Valid from serial number Construction Tools PC AB No
LCD 500,1500 Spare parts list Handheld core drills LCD 500 LCD 500 LCD 1500 Valid from serial number BGF0006875 BGF0006875 BGF0006875 2015 Construction Tools PC AB No. 3392 5193 01 2015-06 General information
More informationOperating Instructions for Level Switch for Liquids. Model: RFS
Operating Instructions for Level Switch for Liquids Model: RFS 1. Contents 1. Contents... 2 2. Note... 3 3. Instrument Inspection... 3 4. Regulation Use... 3 5. Operating Principle... 4 6. Use in Hazardous
More informationAir Mask PARTS LIST High Pressure
Air Mask PARTS LIST High Pressure TAL 0 (L) Rev. MSA 00 Prnt. Spec. 000000 (A) Mat. 000 Doc. 000000 pressure demand facepiece NFPA Facepiece Components Facepiece Blank Type Small Medium Large Hycar 00
More information21D Allfluid pressure switch, electromechanically actuated
D > > 0,... 0, bar (0,... psi), G/, / NPT > > High accuracy > > High number of switching cycles > > Microswitch approved by UL and CSA > > Fixed or adjustable hysteresis > > Shock and vibration tested
More informationERNG-X. Description. Applications. ERNG-X Specifications DERNG2108X012
ERNG-X DERNG2108X012 Description The ERNG-X is a steady state no bleed engineered system for accurate and reliable control of Natural Gas. The ERNG-X includes a pressure regulator, preconditioning filters,
More informationAVK Butterfly valves series 756
1 Valve with gearbox [IP 67] and hand wheel Standard epoxy/epoxy PN 10/16 butterfly valves including gearbox and handwheel for installation in chamber please order: Integral seat Stainless steel seat 756
More informationThreaded fittings. Festo core product range Covers 80% of your automation tasks
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch
More informationFeed Screeners. Model 90 Screener: Model 108 Screener: Model 125 Screener: Manufactured until 3/2002
Back Home FLEX-AUGER Repair Parts Model 90 Screener: 25895 Model 108 Screener: 34347 Model 125 Screener: 25712 Manufactured until 3/2002 25895 34347 25712 25895 34347 25712 Model 90 Model 108 Model 125
More informationCompression fittings Metric and inch
Fittings Compression fittings Metric and inch Ø 4 to 28 mm tube Ø 3 /16" to È" tube Wide range of types and sizes. Rugged and durable. Suitable for use under extreme conditions of temperature and pressure.
More informationSPCH/ Big bottle blowing block
> > Blowing block for linear and rotating blow moulding machines > > Digital position indicator - counter with four decade from 000.0 to 00.0 > > Best suited for PET bottles from 5 up to 30 litres (up
More informationOperating Instructions for Digital Thermometers. Model: DTM
Operating Instructions for Digital Thermometers Model: 1. Contents 1. Contents... 2 2. Note... 3 3. Instrument Inspection... 3 4. Regulation Use... 3 5. Operating Principle... 4 6. Mechanical Connection...
More informationSSV Special Compensating Bypass Check Valve
V 18-0 pecial Compensating Bypass Check Valve ew - 0 ANI 0-0 Δp V R V pecial Compensating Bypass Check Valve V 18-0 (type with integrated non-return valve in the bypass) Range of Applications Compared
More informationParts and Service Manual IMCO
XXTREME ADVANTAGE Gimbal Parts and Service Manual IMCO 510 East Arrow Highway San Dimas, CA 91773 (800) 899-8058 (909) 592-6162 Fax (909) 592-6052 www.imcomarine.com email info@imcomarine.com TABLE OF
More informationTD End-Suction Pumps. Operating data Flow rates up to 300 l/sec Head up to 160 metres Temperature 20 0 C to C
TD End-Suction Pumps One of the broadest ranges of pumps available from any British manufacturer, with discharge sizes from mm to 0 mm. Widest choice of materials of construction and options to suit many
More informationFloat Switches with Permanent Magnet For Vertical Installation Model RSM
Level Measurement Float Switches with Permanent Magnet For Vertical Installation Model RSM WIKA Data Sheet LM 30.01 Applications Level measurement for almost all liquid media Pump/level control and monitoring
More informationSpare parts list. Forward and reversible plate MV Valid from serial number. MV 500 Hatz Electric start 850 mm
Spare parts list Forward and reversible plate MV 00 MV 00 Hatz Electric start 0 mm Valid from serial number BGF00000 www.cp.com MV 00 00 0 0 MV 00 Contents Contents General information...............................................................
More informationAB13F DOUBLE FLANGED BUTTERFLY VALVES DN50 - DN2000 FEATURES TECHNICAL DATA OPTIONS ACCORDING TO
Quality BF LEVER OPERTED GERBOX OPERTED FETURES Designed and manufactured to S79. Vulcanized liner resists deformation. Rated to 00kpa from 0mm up to 00mm and 000kpa from 700mm up to 00mm. Stainless steel
More informationF2.5MHB(69M1) F2.5AMH 03(69M1) 2B69M 100E1
MHB(69M1) AMH 03(69M1) 2B69M 100E1 A1 FOREWORD This Parts Catalogue is related to the parts for the model(s) in the below frame. When you are ordering replacement parts, please refer to this Parts Catalogue
More informationLevel sensor Stainless steel version Model RLT-1000, for industrial applications
Level measurement Level sensor Stainless steel version Model RLT-1000, for industrial applications WIKA data sheet LM 50.02 Applications Level measurement of liquids in machine building Control and monitoring
More informationM3P..G/A, M3P..F/A Modulating control valves (PN16) for chilled and hot water systems
MP..G/A, MP..F/A Modulating control valves (PN) for chilled and hot water systems Three-way or straight-through valves with magnetic actuators for modulating control of chilled and hot water systems. Short
More informationSpare parts list. Forward and reversible plate MV 305, Valid from serial number. MV 305 Honda 600 mm MV 320 Hatz 600 mm
Spare parts list Forward and reversible plate MV 0, 0 MV 0 Honda 00 mm MV 0 Hatz 00 mm MV 0 Honda 00 mm MV 0 Hatz 00 mm Valid from serial number 0000 0000 BGF000000 BGF000000 www.cp.com MV 0, 0 00 00 0c
More informationOperating Instruction for rotating vane flow meter Model: DPM-...
Operating Instruction for rotating vane flow meter Model: PM-... 1. Note Please read and take note of these operating instructions before unpacking and setting the unit for operation, and follow the instructions
More informationOPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS Automatic Tissue Processor MTP INS5500GB 2011-07-08 Instructions MTP 1 Instructions MTP 2 CONTENTS 1. INTENDED USE... 4 2. SYMBOLS... 4 3. SAFETY NOTES... 4 4. COMPONENTS... 5 5.
More informationSpare parts list. Forward and reversible plate MV 220, Valid from serial number. MV 245 Hatz Electric start
Spare parts list Forward and reversible plate MV 0, MV 0 Honda MV Hatz Electric start MV 0 Honda MV Hatz Electric start Valid from serial number 0000 0000 BGF000000 BGF000000 www.cp.com MV 0, 00 0 0c MV
More informationPage 3. Page Page 4. Page 5. Page 6. Page 2. Page 7
Parts manual Verti-Drain 416 Page 01 Code 1640 TM Page 3 Page -10 Page 4 Page Page 6 Page 2 Page Page 8 Page : PTO Page : Tines, adapters and turf hold down kits Page 13: Optional core collector Page
More informationBall Screw Actuator Models Advantages:
Ball Screw Actuator Models Advantages:! Move loads and apply force more efficiently than other mechanical actuators.! Permit faster operation and longer life under load.! Require less power by providing
More informationVibrating Wire Joint Meter Manual
Vibrating Wire Joint Meter Manual All efforts have been made to ensure the accuracy and completeness of the information contained in this document. RST Instruments Ltd reserves the right to change the
More informationModel 685 Model 885. Model 985
Full lift safety valve with spring loading. (AIT) Model 5 Model 5 Model 95 ASME SI Units EP AP ES AS EP AP ES Model 5 Model 5 AS EP AP ES AS Model 95 The valve works as an automatic pressure releasing
More information