Choke Valves SINCE1958. Unique. Precise. Quality. Reliable.
|
|
- Brent Greer
- 6 years ago
- Views:
Transcription
1 SINCE198 MDI / MDIS Choke Valves Unique. Precise. Quality. Reliable.
2 MDI / MDIS SERIES CHOKE VALVES FEATURES Benefits T aylor Valve MDI / MDIS Series Chokes are made with wear resistant material to extend service life, with redundant ORings on the Bonnet Seals and Stem Seals that help prevent leakage. Fully Guided Stems reduce imbalance and vibration. Control Discs provide ANSI Class III/IV Shut off. Available sizes are the 1 Inch, Inch, and the Inch chokes. Accurate Control 90 degree rotation from Full Off to Full On. Bolted Bonnet Safety Bonnet is bolted into the body, it avoids the wellknown risks of corrosion, cross threading, galling of threaded type connection in production environments. Extended Mean Time Between Service Robust design and liberal application of hardened materials, efficient flowgeometry means the valves offer maximum production potential and minimum service requirements. Easy Maintenance Repair parts can be installed in the field without removing the valve from the line. Optional Features Choke Valves can have trims and actuators custom designed for specific requirements. Such as special noise reduction trims, reduced port and maximum orifice trims, and for very high pressure or minimum pressure loss for a declining field. Applications: Well Site Automation Water Injection Control Valve CO Injection Control Valve Pump Bypass Pump Startup Gas Lift Injection Control High Temperature Protection Blow Down and Dump Valve Remote Control for directional drilling Steam Injection Steam Tracer Control Manual and Automated Application
3 MOV Valve Principle of Operation Taylor Valve Technology Multi Orifice Valve Design Principle Provides Precision Control. The two adjacent internal discs each contain two precision orifices. Full Open Throttling Full Closed When the holes on both discs are aligned the valve is in the Full Open Position. When the front disc is rotated, changing the alignment and relationship to the fixed back disc, the flow area and orifice size are affected, the result is either increase or decrease in flow. When the front disc is rotated a full 90 o (one quarter turn), the valve is in the Full Closed Position. The discs are lapped to within two light bands of flatness (+/.0000 ) to achieve positive shut off and maintain precise control. The fixed back disc is held perpendicular to the flow. The front disc floats against the back disc and seeks a mating surface promoting a positive seal. The differential pressure across the upstream disc and the downsteam disc stabilizes the control surfaces. Vibration, noise or fatigues normally associated with loose or unsupported parts are eliminated. No control surfaces are introduced into the orifice, providing a clear center line for the flow. The valves are rated for shutoff at ANSI Class III or IV depending on the style of valve and trim used. The orifices of the standard disc expose a small control surface profile to the fluid steam reducing wear. The multiorifice design produces near linear flow characteristics. The low torque and quarterturn design of Taylor Valve Technology s Multiorifice valves allows for a variety of actuation options: manual, pneumatic, hydraulic, or electric.
4 MDI 1 & Specifications / Cutaway View MDI CHOKE STANDARD DIMENSIONS (IN. +/.10) CONNECTION SIZE 1 FNPT BUTTWELD 10 # RFF 10 # RTJ 00 # RFF 00 # RTJ 00 # RFF 00 # RTJ 900 # RFF 900 # RTJ 100 # RFF 100 # RTJ 00 # RFF 00 # RTJ MDI Inline Choke 1 & Configurations 1 SS or 1018/100 CS ¼ Turn Actuated Body Rating =,000 PSI CV Range= 0..8 EndtoEnd FLOW No. Description Qty 1 Body 1 Wear Sleeve 1 Pointer 1 4 Cage 1 Dowel Pin 4 Disc Fork 1 8 Bonnet 1 9 Retainer Wire 1 10** Dowel Pin 11 ORing 1 ORing 1 1 ORing 1 14 ORing 1 Backup Ring 1 Thrust Bearing 1 1 Cap Screw 18 Index Plate 1 19*** Turning Hub 1 0*** Turning Handle 1 1*** Jam Nut 1 Fitting Vent 1 ** Screw 4** Data Label 1 ** Thumb Screw *Item Optional **Items not shown in section view ***Items not included on actuated version 4 The information contained in these drawings is the sole property of Taylor Valve Technology Inc. and any reproduction in part or whole without the written permission of Taylor Valve Technology Inc. is prohibited.
5 MDI Specifications / Cutaway View MDI CHOKE STANDARD DIMENSIONS (IN. +/.10) CONNECTION SIZE 1 FNPT BUTTWELD MDI Inline Choke Configuration 1 SS ¼ Turn Actuated Body Rating =,000 PSI CV Range = # RFF # RTJ # RFF # RTJ MDI/MDIS 1 00 # RFF 00 # RTJ 900 # RFF 900 # RTJ 100 # RFF 100 # RTJ 00 # RFF 00 # RTJ , EndtoEnd No. Description Qty 1 Body 1 * Wear Sleeve 1 Nut 8 4 Disc Carrier Dowel Pin 4 Disc Fork 1 8 Bonnet 1 9 Dowel Pin 1 10 ORing 1 11 ORing 1 ORing 1 Backup Ring 14 Thrust Bearing 1 1 Stud 8 1** Index Plate 1 1*** Hand Wheel 1 18 Fitting Vent 1 19** Lock Bracket 1 0** Screw 1** Data Label 1 FLOW 9 *Item Optional **Items not shown in section view ***Items not included on actuated version The information contained in these drawings is the sole property of Taylor Valve Technology Inc. and any reproduction in part or whole without the written permission of Taylor Valve Technology Inc. is prohibited. NOTE: Taylor Valve reserves the right to change product designs and specifications without notice.
6 MDIS 1 & Specifications / Cutaway View MDIS CHOKE STANDARD DIMENSIONS (IN. +/.10) CONNECTION SIZE 1 FNPT BUTTWELD 10 # RFF 10 # RTJ 00 # RFF 00 # RTJ 00 # RFF 00 # RTJ 900 # RFF 900 # RTJ 100 # RFF 100 # RTJ 00 # RFF 00 # RTJ MDIS Inline Choke 1 & Configurations 1 SS or 1018/100 CS ¼ Turn Actuated Body Rating =,000 PSI / MAWP 1 PSI for steam CV Range= 0..8 EndtoEnd FLOW No. Description Qty 1 Body 1 Wear Sleeve 1 Pointer 1 4 Cage 1 Dowel Pin 4 Disc Fork 1 8 Bonnet 1 9 Retainer Wire 1 10** Dowel Pin 11 Crush Seal 1 1 Gasket 1 1 HiTemp Packing 1 14 ORing 1 1 Nut 1 Thrust Bearing 1 1 Stud 18 Index Plate 1 19*** Turning Hub 1 0*** Turning Handle 1 1*** Jam Nut 1 Pipe Plug 1 Hex Gland Nut 1 4** Screw ** Data Label 1 ** Thumb Screw *Item Optional **Items not shown in section view ***Items not included on actuated version The information contained in these drawings is the sole property of Taylor Valve Technology Inc. and any reproduction in part or whole without the written permission of Taylor Valve Technology Inc. is prohibited. 11
7 MDIS Specifications / Cutaway View MDI/MDIS MDIS CHOKE STANDARD DIMENSIONS (IN. +/.10) CONNECTION SIZE 1 FNPT BUTTWELD 10 # RFF 10 # RTJ 00 # RFF 00 # RTJ 00 # RFF 00 # RTJ 900 # RFF 900 # RTJ 100 # RFF 100 # RTJ 00 # RFF 00 # RTJ MDIS Inline Choke Configuration 1 SS ¼ Turn Actuated Body Rating =,000 PSI / MAWP 1 PSI for steam CV Range = The MDIS Steam valve is designed for high pressure throttling of steam. The multiple orifice system is designed for long life in difficult applications. The standard valve has 1,, or female NPT ends, with flanged or special ends readily available. Standard trim is Tungsten Carbide and designed for linear flow characteristics. Manual or electric actuation is standard EndtoEnd FLOW No. Description Qty 1 Body 1 * Wear Sleeve 1 HiTemp Packing 1 4 Disc Carrier Dowel Pin 4 Disc Fork 1 8 Bonnet 1 9 Compression Plate 1 10 Dowel Pin 1 11 ORing 1 1 Gasket 1 1 Stud 8 14 Nut 8 1 ORing 1 Thrust Bearing 1 1 Pipe Plug 1 18*** Hand Wheel 1 19** Screw 0** Data Label 1 **1*** Calibration Label 1 ** Lock Bracket 1 *Item Optional **Items not shown in section view ***Items not included on actuated version The information contained in these drawings is the sole property of Taylor Valve Technology Inc. and any reproduction in part or whole without the written permission of Taylor Valve Technology Inc. is prohibited.
8 Choke Series CA CI MC MCX MDA MDAS MDI MDIS RB R Size Choke Nomenclature Service Type 0 Standard 1 NACE Steam/High Temp. Actuation Type 0 Manual Handle 1 Manual Gear Electric Pneumatic 4 Hydraulic Positive Bean Style 0 Nonflanged 1 RFF RTJ RFF X RTJ 4 RTJ X RFF Schedule 0 Nonflanged XS XXS SLIPON API 8 10 Trim Material 0 CARBIDE DISC STELLITE WR SLV 04 CERAMIC DISC STELLITE WR SLV 0 CARBIDE DISC CARBIDE WR SLV 1 CERAMIC DISC NO WR SLV 1 CARBIDE DISC NO WR SLV CERAMIC DISC/CARBIDE FLOW TUBE 44 R/RBSERIES 4 BEAN 14 SS Body Material 00 DUPLEX SS 0 CARBON STEEL 04 LOW ALLOY (410 LACS) 0 1 SS (CF8M) 0 1 SS "L" (CFM) 0 ALUMINUM BRONZE 08 A0 LF 09 LCC 11 SUPER DUPLEX SS MDI = MDI MDIS = MDIS EXAMPLE ONLY* Choke part number has to be 1 digits. Inlet Connection Outlet Connection 01 1" FNPT 0 1" BUTT WELD 0 1" SOCKET WELD 04 1" VICTAULIC 0 1" " " " 900/ " " FNPT 1 " BUTT WELD 1 " SOCKET WELD 14 " VICTAULIC 1 " 10 1 " 00 1 " " 900/ " 00 0 " FNPT 1 " BUTT WELD " SOCKET WELD " 10 4 " 00 " 00 " 900 " " " FNPT 0 4" BUTT WELD 1 4" SOCKET WELD 4" VICTAULIC 4" " 00 4" 00 4" 900 4" " 00 9 " " " 00 4 " " " " " " " " " /1" 000 1/1" 000 1/1" /1" 000 9/1" 000 9/1" /8" /8" /8" /1" /1" /1" /1" /4" 00# 1." 900/100 1/1" /1" /1" /1" " UNION " 0M x " 0F Union 80 10" " " " /1" " Butt Weld Orifice Size 01 () 1/8" RND PORTS 0 () /1" RND PORTS 0 () 1/4" RND PORTS 04 () /8" RND PORTS 0 () 1/" RND PORTS 0 () /8" PIE PORTS 0 () /4" RND PORTS 08 () /8" RND PORTS 10 () 1/1" RND PORTS 11 () 11/4" RND PORTS 14 () 11/" RND PORTS 0 () /4" PIE PORTS () 1" ROUND PORTS 8 () " PIE PORTS 40 () 11/4" PIE PORTS 41 () 1/8" PIE PORTS 4 () 11/8" RND PORTS 4 () 11/ PIE PORTS 49 () /8" RND PORTS 4 ().9 PIE HOLES CV 1 CV 14 CV 8 40 CV 9 4 CV 0 CV 1/4 BEAN 18/4 BEAN 4 8/4 BEAN 1/4 BEAN 4/4 BEAN 8/4 BEAN 8 /4 BEAN *For more options, contact Taylor Valve. 9 48/4 BEAN 4 /4 BEAN 4 40/4 BEAN 44 4/4 BEAN 4 8/4 BEAN 4 0/4 BEAN 10/4 BEAN 11/4 BEAN 4 14/4 BEAN 1/4 BEAN 1/4 BEAN 19/4 BEAN 8 0/4 BEAN 9 4/4 BEAN 0 1/4 BEAN 1 /4 BEAN /4 BEAN /4 BEAN 4 9/4 BEAN /4 BEAN 1/" RND PORTS /4 BEAN 8 4/4 BEAN 9 44/4 BEAN 80 4/4 BEAN 81 4/4 BEAN 8 1/4 BEAN 8 /4 BEAN 84 /4 BEAN 8 CV 8 1/4 BEAN 88 8 CV Seal Material 00 HNBR/HSN 01 NBR 0 EPDM 04 FKM (VITON) 0 NEOPRENE 0 NBR (PEROXIDE CURED) 0 STEAM SEALS 09 AFLAS 1 KALREZ PINS I INCONEL (Optional) Butt weld connections MUST specify a schedule. All API connections are RTJ style by default. API flange bore (SCHEDULE) is specified by API. REVISED: 1001 Taylor Valve Technology 800 S.W. 8th Street Oklahoma City, Oklahoma 18 TEL FAX WEB info@taylorvalve.com
Choke Valves SINCE1958. Unique. Precise. Quality. Reliable.
SINCE1958 MDA / MDAS Choke Valves Unique. Precise. Quality. Reliable. MDA / MDAS SERIES CHOKE VALVES FEATURES enefits T aylor Valve MDA / MDAS Series Chokes are made with wear resistant material to extend
More informationChoke Valves SINCE1958. Unique. Precise. Quality. Reliable.
SINCE95 MC SERIES Choke Valves Unique. Precise. Quality. Reliable. MOV Valve Principle of Operation Taylor Valve Technology Multi-Orifice Valve Design Principle Provides Precision Control. The two adjacent
More informationTaylor Valve Technology, Inc
MULTI-ORIFICE VALVE MD SERIES PRODUCTION CHOKES Gas Lift Water Injection Enhanced Oil Recovery Throttling Valve High DP Valve Motor Operated Valve Manual and Automated Applications JUL0-TVT-OKC SERIES
More informationTaylor Valve Technology, Inc
MULTI-ORIFICE VALVE Taylor Valve MD SERIES PRODUCTION CHOKES Gas Lift Water Injection Enhanced Oil Recovery Throttling Valve High DP Valve Motor Operated Valve Manual and Automated Applications JAN00-TVT-OKC
More informationVonk Choke Valve. Flow Control. Features and benefits. Product overview. Technical data. General applications. Model YCV (Y-Type body)
Flow Control Vonk choke valves provide superior performance in abrasive environments, precise flow control and ease of maintenance, delivering operational reliability in the most challenging applications.
More informationFeatures: Quality Testing and Documentation
1 The Yokogawa Falcon Series Dual Chamber Orifice Assembly YFOM-DC, is suitably designed for on-line retraction and inspection of orifice plates in process full flow and pressure conditions. The orifice
More informationSV81H Safety and Relief Valve
Page TID BR Rev.0 UV SV8H Safety Relief Valve Description The SV8H have fied blowdown.no blowdown adjustment required when setting or testing the valve.it is designed for short blowdown on all medias.
More informationVonk Choke Valve. Flow Control. Features and benefits. Product overview. General applications. Technical data. Model CHV (Angle Body)
Vonk hoke Valve Model HV (ngle ody) Flow ontrol Vonk choke valves provide superior performance in abrasive environments, precise flow control and ease of maintenance, delivering operational reliability
More informationMultiPort Ball Valves
Subsidiary of Bray International, Inc. Subsidiary of BRY INTERNTIONL, Inc. & WY Multi-Port Valves Full Port/Standard Port / - Ball Valves SME CL 0/00 (PN0 to PN 0) 00/000 psi WOG ( to 9 Bar) MultiPort
More informationCHECK VALVE CH-1601A (EN)
CH-1A (EN) ABOUT US FBV Inc. is an ISO 001 certified company specializing in manufacturing industrial valves including ball valves, gate valves, globe valves, check valves, plug valves and butterfly valves
More informationType. Facts. 441, 442 Full nozzle DIN. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441, 442 DIN Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 468.01-E DIN, ANSI 40 Cap H2 19 Lock nut 18 Adjusting screw with bushing 16 Upper spring plate 12
More informationPressure reducing valve. Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI
Pressure reducing valve in straightway form NPS 1-6 Pressure reducing valve Pressure regulating valve, straight through with diaphragm actuator DMA Actuator with rolling diaphragm Cast steel Fig. 701 Page
More informationElectric Actuated Ball Valves 2-way Stainless Steel, Full Port 1/4 to 2 NPT
1/4 to 2 NPT Features Direct mount ISO5211 Full Port 316 stainless steel ball valve 1000 PSI working pressure at 100 F (38 C) Highly visual dome style valve position indicator Rugged aluminum Type 4X weatherproof
More informationPressure reducing valve. Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI
Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI Pressure reducing valve ARI-PREDU - ANSI Pressure regulating valve, straight through with diaphragm actuator DMA Actuator with rolling
More informationRL-H80 PARTS LIST # K
RL-H80 PARTS LIST # 102837K USE THIS PARTS LIST FOR: Hoist Serial Number: 2733 to For older hoists use the following: Parts List No. 102837G for Serial Number 2485 to 2732 IF YOUR HOIST DOES NOT FALL WITHIN
More informationPig Valves Complete Solutions for Industrial Valves. jagflo.com
Pig Valves Complete Solutions for Industrial Valves Cat.no.:E-PV-00 Introduction ~ Quality Commitment How to Order Product Introduction Material Specifications Working Sequences Design Feature Dimensions
More informationSERVICE PARTS MANUAL
SERVICE PARTS MANUAL 8 SERIES SNOW PLOW FOR SERIAL NUMBERS AFTER 8D100000 00 Sno-Way International 9100G TABLE OF CONTENTS PAGE DEFLECTORS... POWER PACK... HYDRAULIC POWER UNIT... LIFT CYLINDER... ANGLE
More informationParts and Service Manual IMCO
XXTREME ADVANTAGE Gimbal Parts and Service Manual IMCO 510 East Arrow Highway San Dimas, CA 91773 (800) 899-8058 (909) 592-6162 Fax (909) 592-6052 www.imcomarine.com email info@imcomarine.com TABLE OF
More informationDaniel Senior Orifice Fitting Differential Pressure Flow Meters. Technical Guide May 2013
Daniel Senior Orifice Fitting Differential Pressure Flow Meters Technical Guide May 2013 Differential Pressure Flow Meters Technical Guide Proving its worth every day Overview The Daniel Senior Orifice
More informationItem 620A Multi-Way Sanitary Ball Valve
R Item 0A Multi-Way Sanitary Ball Valve 00 WOG/ PN : /"-" SPECIFICATION * Body & end caps quality investment casting * Regulation (EC) No. / 00; (EU) 0/0 * Available in stainless steel or carbon steel
More informationGPX 1250 Gas Piston Pump
GPX 0 Gas Piston Pump Owner s Manual Model Number 0000 SprayTECH 0 Fernbrook Lane Minneapolis, MN Technical Assistance: -00-- Order Entry: -00--00 Fax: -00--0 www.spraytechinc.com Printed in the U. S.
More information708BS Series Bellows Stem Seal
708BS Series Bellows Stem Seal Fractional Flow Control Valves FRACTIONAL FLOW CONTROL S CRN Registration Number Available Bellows stem seals eliminate fugitive emissions by surrounding the valve stem with
More informationBG 240. Spare parts list. Trowel. Valid from serial number Atlas Copco Construction Tools AB No c
BG 0 Spare parts list Trowel BG0 HSQP BG0 HSQP BG0 HSTP BG0 HSTP Valid from serial number BGB00000 BGB00000 BGF000000 BGF000000 0 Atlas Copco Construction Tools AB No. 900 0 0c 00 BG 0 Contents Contents
More informationTrue Union PVC Ball Valves Industrial Grade, Full Port Design 1/2 to 4 inch Pipe
True Union PVC Ball Valves Industrial Grade, Full Port Design 1/2 to 4 inch Pipe SERIES Features Pressure rated 232 PSI (16 Bar) at 73 F (23 C) Full Port design for unrestricted flow Energized PTFE ball
More informationThis is trial version
s, s, Ejector coupling devices, Unscrewing components, Two-stage ejectors, Latch locking units, Mould slides-modular system 2.01 2.02 Ordering example : Z 40 / 1,6 x 40 Shaft Overall length Z02/... 2.1
More information708 Series. Fractional Flow Control Valves. fractional flow control valves. CRN Registration Number Available
708 Series Fractional Flow Control s fractional flow control valves CRN Registration Number Available The Mark 708 was developed by Jordan to provide the most accurate control available for fractional
More informationParts / Spares Reference Sheet
Parts / Spares Reference Sheet Graco GMAX 5900 GMAX II 5900/5900HD Standard Series GMAX II 5900/5900HD Standard Series 0 28 22 30 2 5 38 4 46 6 37 50 9 45 2 20 45 43 8 0 52 05 23 40 27 38 5 3 32 33a 33b
More informationHERZ STRÖMAX GM/GML/GR STRÖMAX-GM/GML Circuit Control Valve with test points STRÖMAX-GR Circuit Control Valve Data sheet STRÖMAX GM/GML/GR, Issue 0215
HERZ STRÖMAX 7GM/GML/GR HERZ STRÖMAX GM/GML/GR STRÖMAX-GM/GML Circuit Control Valve with test points STRÖMAX-GR Circuit Control Valve Data sheet STRÖMAX GM/GML/GR, Issue 0 H Rp L SW L L Dimensions in mm
More informationLH 700. Spare parts list. Forward and reversible plate. Valid from serial number. LH 700 Hatz Electric start 810 mm Bio
Forward and reversible plate Hatz Electric start 0 mm Hatz Electric start 0 mm Bio Hatz Electric start mm Bio Valid from serial number 0000 0000 0000 Contents Contents General information.....................................................................................................................................
More informationData is only for informational purpose. All specifications are subject to change without notice.
MV Data is only for informational purpose. All specifications are subject to change without notice. 1 First in knife gate 2018-12-19 solutions issue 24 Knife gate valve MV Stafsjö s knife gate valve MV
More information98 Series Back Pressure. Valve Link. Features. Fisher Controls. August 1993 Bulletin 71.4:98
Series Back Pressure and Type Relief VL000 Valves FIELDVUE Valve Link Fisher Controls August Bulletin.: The Series (figure ) is used for back pressure or relief applications in liquid, gas, air, and steam
More informationSubsea Valves.
Subsea Valves FITOK Group FITOK GmbH (Headquarter) Sprendlinger Landstr., 0 Offenbach am Main, Germany Tel.: + 00 Fax: + 00 FITOK, Inc. North Promenade lvd., Suite 0, Stafford, Texas, US Tel.: + 00 Fax:
More informationLH 700. Spare parts list. Forward and reversible plate. Valid from serial number. LH 700 Hatz Electric start 810 mm Bio
LH 00 Spare parts list Forward and reversible plate LH 00 Hatz Electric start 0 mm LH 00 Hatz Electric start 0 mm Bio LH 00 Hatz Electric start 0 mm LH 00 Hatz Electric start 0 mm Bio Valid from serial
More informationBaumann Little Scotty Bronze Control Valve
24000 Valve Product Bulletin Baumann 24000 Little Scotty Bronze Control Valve Baumann Little Scotty industrial control valves are intended for general utility service in pressure, flow, and temperature
More informationjamesbury Bulletin B101-2EN Issue 11/2007
/" " (DN 8 0) ELIMINATOR 00 CWP AND ANSI CLASS 00 THREADED END BALL VALVE The Eliminator ball valve, brings you the performance and design features you've been looking for all in a single, low-cost valve.
More informationMK-MANTA I. Model MK-Manta I Core Drill Owner s Manual Parts List & Operating Instructions. serial number CAUTION
please record the serial number of your drill in this block. serial number For your one (1) year warranty to be effective, complete the warranty card (include the serial number) and mail it in as soon
More informationSHORT PATTERN FLANGE BALL VALVES 5000 SERIES
SHORT PATTERN FLANGE BALL VALVES 5000 SERIES Jarecki 5000 Series metal seated ball valves with the Phantom Port incorporate the most innovative design in ball valves today. Proven in the field, they provide
More informationCS50 Chain Saw UT B Page 1 of 17 Accessories
CS50 Chain Saw UT-10710-B Page 1 of 17 Accessories CS50 Chain Saw UT-10710-B Page 2 of 17 Accessories A02177 1 BUMPER SPIKE KIT 7031099 1 S RUBBER TUBING (10') 18453 1 /P GREASE-Multi-Purpose (Sprocket
More informationFxM. ISO7/1 thread, EN331 standard PN40~PN25(5MOP/20MOP) Size:1/4 ~2
BA VAVE - EVER ANDE F/F Model: E0 Advantica british gas, wras, en approved ball valves yellow stainless steel lever handle; FxF ISO/ thread, EN standard PN0~PN(MOP/0MOP) Size:/ ~ According to EN standard.
More informationVAREC 2010B/2020B PRESSURE AND VACUUM RELIEF VALVES
VAREC 0B/B PRESSURE AND VACUUM RELIEF VALVES Weight-loaded relief valves that protect tanks from damage or deformation, minimize emissions to the environment and loss of product due to evaporation FEATURES
More informationMK-MANTA III OWNER S MANUAL PARTS LIST & OPERATING INSTRUCTIONS
www.mkdiamond.com MK-MANTA III OWNER S MANUAL PARTS LIST & OPERATING INSTRUCTIONS Revision 202 08.2012 Manual Part# 161117 Caution: Read all safety and operating instructions before using this equipment.
More informationRD 100. Spare parts list. RD 100 s/n BES Construction Tools PC AB No
RD 100 Spare parts list RD 100 s/n BES100496 2018 Construction Tools PC AB No. 9800153901 2018-10 General information This spare parts list applies to the following: Part number 8311030410 RD 100 Description
More informationRH 658 L, 658 LS, 658 L-01
RH 658 L, 658 LS, 658 L0 Spare parts list Rock drills 00 Atlas Copco Construction Tools AB No. 9800 08 0 000609 RH 658 L, 658 LS, 658 L0 Contents Contents General information................................................................
More informationRosemount 1595 Conditioning Orifice Plate
Reference Manual Rosemount 1595 Conditioning Orifice Plate www.rosemount.com Reference Manual 00809-0100-4828, Rev BA Rosemount 1595 Rosemount 1595 Conditioning Orifice Plate NOTICE Read this manual before
More information3", 4", 6" & 8" Model H Series Alarm Check Valve Installation and Maintenance Guide
", ", " & " Model H Series Alarm Check Valve Installation and Maintenance Guide 077 AIRPARK DRIVE STANDISH, MICHIGAN PHONE 99-- 00-2-0 FAX 99--92 www.globesprinkler.com JUNE C- BULLETIN A.C.V.I.M., REV.
More informationIllustrated Parts List for VMAC System V Ford SuperDuty F250-F L Gas V8 Engine
Illustrated Parts List for VMAC System V900112 2014-2011 Ford SuperDuty F250-F350 6.2L Gas V8 Engine 1 - Kit Pack List... 2 2 - Fastener Pack, 3800735, V900112... 4 4 - Compressor Sub Components, P120004...
More informationVAREC 221 SERIES EMERGENCY PRESSURE RELIEF MANWAY COVERS
VAREC SERIES EMERGENCY PRESSURE RELIEF MANWAY COVERS The Series is designed to provide emergency venting of low pressure storage tanks and vessels FEATURES P PV Available in emergency pressure only and
More informationInductive Cylinder Position Sensors
Inductive Cylinder Position Sensors 4-Wire DC (NPN and PNP) 2-Wire AC/DC Weld immune 250, 000, and 3000 psi designs C-Series F-Series Rating (psi) Probe Diameter Inductive Cylinder Position Sensors Pepperl+Fuchs
More informationM.R.P. Dt
M.R.P LIST Dt. 13.09.2013 "ZOLOTO " Bronze Globe Valve (Screwed). 1001. 8mm 10mm 15mm 20mm 25mm 32mm 40mm 50mm 65mm 80mm 100mm 416.00 416.00 416.00 601.00 791.00 1305.00 1723.00 2513.00 4308.00 7174.00
More informationSERVICE PARTS MANUAL
SERVICE PARTS MANUAL DX SERIES SNOW PLOW FOR SERIES SNOW PLOWS SERIAL NUMBERS AFTER DX0000 00 Sno-Way International 0G TABLE OF CONTENTS Page HYDRAULIC SYSTEM (DX)... POWER PACK FRAME... 3 BLADES... LIFT
More informationSpare parts list. Forward and reversible plate MV 305, Valid from serial number. MV 305 Honda 600 mm MV 320 Hatz 600 mm
Spare parts list Forward and reversible plate MV 0, 0 MV 0 Honda 00 mm MV 0 Hatz 00 mm MV 0 Honda 00 mm MV 0 Hatz 00 mm Valid from serial number 0000 0000 BGF000000 BGF000000 www.cp.com MV 0, 0 00 00 0c
More informationChemlock PFA and PP Filter Housings
CONTAMINATION CONTROL SOLUTIONS Chemlock PFA and PP Filter Housings Installation and use manual Table of Contents Introduction... 2 Safety... 2 Specifications... 2 PFA... 2 PP... 2 Dimensions... 3 Minimum
More informationEasy Flow Indicator Magnetisch-Induktiver Durchflussmesser. Type 8024 For Insertion Fittings. Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI
Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI Advantages / Benefits Reduced costs of ownership up to 6% Economic integration in pipe systems without any additional piping Shows flow rate with a clear,
More informationRepair Parts List DRYER MODEL NUMBER MDG50PNHWW. When requesting service or ordering parts, always provide the following information:
Repair Parts List DRYER MODEL NUMBER MDG50PNHWW When requesting service or ordering parts, always provide the following information: - Product Type - Part Number - Model Number - Part Description 2005
More informationSpare parts list. Forward and reversible plate MV 220, Valid from serial number. MV 245 Hatz Electric start
Spare parts list Forward and reversible plate MV 0, MV 0 Honda MV Hatz Electric start MV 0 Honda MV Hatz Electric start Valid from serial number 0000 0000 BGF000000 BGF000000 www.cp.com MV 0, 00 0 0c MV
More informationCOBRA. Spare parts list. Petrol drills and breakers COMBI Atlas Copco Construction Tools AB No c
COBRA COMBI Spare parts list Petrol drills and breakers 0 Atlas Copco Construction Tools AB 00 0 0c 00 COBRA COMBI Contents Contents General information................................................................
More informationEnviZion TM Hygienic Diaphragm Valve
EnviZion TM Hygienic Diaphragm Valve Experience the Future with EnviZion The Biopharm industry relies on hygienic diaphragm valves for demanding process applications due to their unique balance of clean-ability,
More informationRosemount 1595 Conditioning Orifice Plate
Reference Manual Rosemount 1595 Conditioning Orifice Plate www.rosemount.com Reference Manual Rosemount 1595 Rosemount 1595 Conditioning Orifice Plate NOTICE Read this manual before working with the product.
More informationPreparation and Installation of the Composite Type Rupture Disc (Light Lip and Heavy Lip) in 30 Seat Insert, Full-Bolted, and Union Type Holder
GEP-7004 Rev. L 101251 Ref. ID: 5472 Preparation and Installation of the Composite Type Rupture Disc (Light Lip and Heavy Lip) in 30 Seat Insert, Full-Bolted, and Union Type Holder WARNING USER SHOULD
More informationTech Tubes & Fittings. An ISO 9001: 2008 Company
Tech Tubes & Fittings An ISO 9001: 2008 Company The Company Tech Tubes & Fittings is a highly acclaimed manufacturer and exporter of products like Instrumentation/Tube Fittings, Pipe Fittings, Flanges
More informationSERVICE PARTS MANUAL
SERVICE PARTS MANUAL SERIES SNOW PLOWS WITH EIS PLOW LIGHT HARNESS CONNECTIONS FOR GRAVITY HYDRAULICS WITH SERIAL NUMBERS BEFORE G10000 WITH SERIAL NUMBERS AFTER G00000 FOR DOWN PRESSURE HYDRAULICS WITH
More informationSECTION FIVE - SANITARY - MANHOLES
Sealtight & 4 Lug Assemblies* ITEM # DESCRIPTION PART # 1 2 3 4 6 7 8 9 10 DUST COVER VENT (not shown) STAINLESS STEEL DUST COVER HINGE PIN (3/ SEALTIGHT) HINGE PIN (/8 4 LUG) STUD (3/ SEALTIGHT) STUD
More informationRanger 33cc 16" Chain Saw UT Page 1 of 14 Accessories
Ranger 33cc 16" Chain Saw UT-10926 Page 1 of 14 Accessories Ranger 33cc 16" Chain Saw UT-10926 Page 2 of 14 Accessories Ref # Part Number Qty S/P/F Description PT12371MD 1 Guide Bar (Power Tip)) 12" (3/8")
More informationEB7650TH 76CC BACKPACKER BLOWER 4-STROKE
10-2014 EB7650TH 76CC BACKPACKER BLOWER 4-STROKE 49 50 48 52 53 51 A09 31 32 45 44 43 47 46 39 41 30 33 34 35 37 36 38 27 28 29 5 6 7 8 10 11 12 13 15 17 16 18 19 14 2 1 20 21 55 22 23 24 239 238 A08 56
More informationDouble stop valves Type DSV 1 and DSV 2 REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Double stop valves Type DSV 1 and DSV 2 REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction........................................................................................3
More informationSECTION 8 - ULTRA & ULTRA-C PARTS CATALOGUE
SECTION 8 - ULTRA & ULTRA-C PARTS CATALOGUE PART # DESCRIPTION PAGE MOUNTING KITS & TANKS 903U MOUNTING KIT WITH TANK 801-802 905U MOUNTING KIT WITHOUT TANK 803-804 902U MOUNTING KIT - CRADLE, BLOCKS &
More informationHOW TO ORDER SWIVEL JOINTS
HOW TO ORDER SWIVEL JOINTS Emco Wheaton offers a wide variety of swivel joints to fit almost any application. In order to assist you in ordering the Correct swivel joint, we have developed a guideline
More informationProduct Bulletin BPS-100 Revision 2.1 November C l a m p P i p e C o n n e c t o r
Product Bulletin BPS-00 C l a m p P i p e C o n n e c t o r Table of Contents BlueSky Clamp Connector... Industrial Applications... Clamp Connector Description... How the Metal to Metal Seal Works... Design
More informationMechanically Activated Device for Dry Run Protection in Applications with LORENTZ Solar Pump Systems
Well Probe Mechanically Activated Device for Dry Run Protection in Applications with LORENTZ Solar Pump Systems The switch can be used to detect the water level within a well. When the water level in the
More informationPerformance!Nxt Release
June 04, 2018 Performance!Nxt Release 12.7220 Flowserve is pleased to announce the latest release of Performance!Nxt (P!Nxt), the industry's foremost Control Valve Sizing, Selection and Project Management
More informationParts Manual Kleen Sweep 32R Rider Sweeper
Parts Manual Kleen Sweep 32R Page 2 Table of Contents Side broom R.H., part 1... Side broom R.H., part 2... Front wheel drive... Accelerator... Steering... Seat group... Group of main sweeper roller, part
More information1/2
http://partsradar.arinet.com/scripts/empartisapi.dll?mf&app=ariens&session=27f5776d-d5a8-4417-865b-d472735c5bb5&cat=2&assem=4658&imgma 1/2 Ref # Par t # Descr iption Context Note Foot Note Min Qty UOM
More informationCool Drawer Dual Sensor
The Cool Drawer Dual Sensor is designed for use in critical processes where it is desirable to have a second crystal in the vacuum chamber. Water cooled, cast stainless steel sensor body, two Cool Drawer
More informationPreparation and Installation of the CM and CMV Type Rupture Discs in Forward Acting Insert, Full Bolted, and Union Type Holders
Preparation and Installation of the CM and CMV Type Rupture Discs in Forward Acting Insert, Full Bolted, and Union Type Holders GEP-7011 Rev. F 23777 Ref. ID: 8637 WARNING USER SHOULD READ AND THOROUGHLY
More informationCLAMSHELL PIPE CUTTING AND BEVELLING MACHINES. Mactech Europe LTD
CLAMSHELL PIPE CUTTING AND BEVELLING MACHINES Mactech Europe LTD Mactech s Clamshell lathes are portable pipe cutting machines designed for on-site precision severing, severing/beveling, and severing/double
More informationAir Mask. Medium Pressure (3000 psi) NFPA Edition Compliant PARTS LIST
Air Mask PARTS LIST Medium Pressure (000 psi) NFPA - 00 Edition Compliant TAL 0 (L) Rev. MSA 00 Prnt. Spec. 000000 (A) Mat. 000 Doc. 000000 pressure demand facepiece NFPA Facepiece Components Facepiece
More informationBARE SHAFT PUMPS AND MOTOR PUMPS
APPLICATIONS Air Conditioning Heating and ventilation Refrigeration Fire protection Plumbing Water Circulation Transfer and Irrigation Pressure Boosting Process Industries Water Treatment and Supply DESIGN
More informationItem 110F Top-Entry Flanged Ball Valve
Item 0F op-entry Flanged Ball Valve ANSI/ PN / ANSI00/ PN 0 SIZE: /"-" SPECIFICAION * Body & end caps quality investment casting * Available in stainless steel or carbon steel * with ISO direct mounting
More informationRosemount 1595 Conditioning Orifice Plate
Rosemount 1595 Conditioning Orifice Plate Ordering information Rosemount 1595 Conditioning Orifice combines a flow conditioner with an orifice plate into a highly accurate primary element. Requires only
More informationBall Screw Actuator Models Advantages:
Ball Screw Actuator Models Advantages:! Move loads and apply force more efficiently than other mechanical actuators.! Permit faster operation and longer life under load.! Require less power by providing
More informationButterfly Control Valve. DMK/6 Series
Butterfly Control Valve DMK/6 Series UL Listed for US and Canada UL 842 and ULc C125 & C842 File # MH 18741 Models DMK 707/6 (3/4 NPT) DMK 710/6 (1 NPT) DMK 712/6 (1 1/4 NPT) DMK 715/6 (1 1/2 NPT) DMK
More informationIntegrated Valvejet 9 Dot Print Head
Integrated Valvejet 9 Dot Print Head What am I getting? What are the improvements? Diagraph is proud to release the new IV9 Dot print head. New features include: Environmentally Sealed housing for harsh
More informationRepair Parts List DRYER MODEL NUMBER MDG75MNVWQ. When requesting service or ordering parts, always provide the following information:
Repair Parts List DRYER MODEL NUMBER MDG75MNVWQ When requesting service or ordering parts, always provide the following information: - Product Type - Part Number - Model Number - Part Description 2005
More informationPlumbing Brass Specification Guide
Plumbing Brass Specification Guide www.wattscanada.ca The Dial-ese Cartridge, a Standard in Canadian Plumbing for 0 Years Since its conception in the early 0s, the Dial-ese cartridge has proven to be one
More informationPreparation and Installation of the RCS Rupture Disc Assembly
GEP-6048 Rev. Y 102335 Ref. I.D.: 6691 Preparation and Installation of the RCS Rupture Disc Assembly WARNING USER SHOULD READ AND THOROUGHLY UNDERSTAND THESE INSTRUCTIONS BEFORE INSTALLING DISC. THESE
More informationIntegrated Valvejet 18 Dot Print Head. What am I getting? What are the improvements?
Integrated Valvejet 18 Dot Print Head What am I getting? What are the improvements? Diagraph is proud to release the new IV18 Dot print head. New features include: Environmentally Sealed housing for harsh
More informationIntroduction. Available materials. Aluminum Carbon Steel Stainless Steel Ductile Iron Special Materials on Application
VALVES & CONTROLS VAREC 00B/00B The Varec 00B/00B protects tanks from damage or deformation, and minimizes emissions to the environment, as well as loss of product due to evaporation. Introduction 00B
More informationPSI COMPAKT SEAL PRESSURE TIGHT UP TO 5 BAR SPECIAL VERSIONS FOR DIFFERENT PIPE SYSTEMS STAINLESS STEEL PRESSURE PLATES AS STANDARD
PSI COMPAKT SEAL PRESSURE TIGHT UP TO 5 BAR SPECIAL VERSIONS FOR DIFFERENT PIPE SYSTEMS STAINLESS STEEL PRESSURE PLATES AS STANDARD ALL SPLIT VERSIONS OF OUR STANDARD COMPAKT SEALS ARE FOLDABLE WWW.PSI-PRODUCTS.COM
More informationAB13F DOUBLE FLANGED BUTTERFLY VALVES DN50 - DN2000 FEATURES TECHNICAL DATA OPTIONS ACCORDING TO
Quality BF LEVER OPERTED GERBOX OPERTED FETURES Designed and manufactured to S79. Vulcanized liner resists deformation. Rated to 00kpa from 0mm up to 00mm and 000kpa from 700mm up to 00mm. Stainless steel
More informationStainless steel hygienic butterfly valves. F250 for imperial tubing. F251 for metric tubing.
Stainless steel hygienic butterfly valves. F for imperial tubing. F for metric tubing. Features Keystone technology. Quarter turn operation. Isolation or regulation control. Equal percentage characteristics.
More informationGXT 665R Mobile Shear PARTS MANUAL
GXT 665R Mobile Shear PARTS MANUAL CONTACT INFORMATION World Headquarters Genesis Attachments 1000 Genesis Drive Superior, WI 54880 USA Toll Free: 888-SHEAR-IT (888-743-2748) Phone: 715.395.5252 Fax: 715.395.5255
More informationTD End-Suction Pumps. Operating data Flow rates up to 300 l/sec Head up to 160 metres Temperature 20 0 C to C
TD End-Suction Pumps One of the broadest ranges of pumps available from any British manufacturer, with discharge sizes from mm to 0 mm. Widest choice of materials of construction and options to suit many
More informationThe 221 Series is designed to provide emergency venting of low pressure storage tanks and vessels.
Varec Series The Series is designed to provide emergency venting of low pressure storage tanks and vessels. Introduction When the tank is exposed to abnormal internal pressure or vacuum beyond the capability
More informationSpare Parts. Small Single Seat Valve SP70860-GB
Spare Parts Small Single Seat Valve SP70860-GB1 2003-09 Stop Valve 12.7-19 mm 2 Reg.: 2003-05 Intro.: 2003-05 Stop Valve 12.7-19 mm Pos. Qty. Denomination 12.7 mm 19 mm Actuator, complete... 9612-9404-01
More information1 AM-167/202/242/282/322 Parts Manual. Table Of Contents
AM-167/202/242/282/322 Parts Manual Table Of Contents Mower Beam with Bearings...2 Mower Beam with Bearings...4 Cutting Discs...6 Main Gearbox...8 V-Belt Pulley...10 Headstock...12 Carrier Beam...14 V-Belt
More informationDIP. Spare parts list. Centrifugal pumps 25, 25-US, 35, 35-US, 65, 65-US Atlas Copco Construction Tools AB No c
DIP 5, 5US, 35, 35US, 65, 65US Spare parts list Centrifugal pumps 0 Atlas Copco Construction Tools AB No. 9800 5 0c 003 DIP 5, 5US, 35, 35US, 65, 65US Contents Contents General information................................................................
More informationSpare parts list. Forward and reversible plate MV Valid from serial number. MV 500 Hatz Electric start 850 mm
Spare parts list Forward and reversible plate MV 00 MV 00 Hatz Electric start 0 mm Valid from serial number BGF00000 www.cp.com MV 00 00 0 0 MV 00 Contents Contents General information...............................................................
More informationMODELS MR44B & MR44K (See drawings below for additional parts)
MODELS MRB & MRK (See drawings below for additional parts) 0 Cup Washer $. 00 Wir e Lock Pin,." x.0" $. 00 Screw Pin Shackle Clevi s $. 00 Worm Drive Hose Clamp (-/" to -/" Clamping Dia.) $. 0 Single Split
More informationYANMAR N18 AUX.ENGINE SPARES
YANMAR N18 AUX.ENGINE SPARES Contact: A.H. Global Impex Piston recondition 6 pcs Main Bearing 146673-02351 12 PAIR C.R Bearing 146673-22380 11 PAIR Piston Ring Oil 146676-22180 17 Pcs Piston Rind TOP 146673-22950
More informationNon-Drip Quick Connect Couplings
Non-Drip Quick Connect Couplings Modular constructions offering just the right coupling for every fluid application ^ Innovative Products for Demanding Applications Innovative Couplings for Fluid Applications
More information