CF CARD CONNECTOR MA TYPE

CF Card 1.27mm (.5") pitch CF CARD CONNECTOR MA TYPE 5-circuit CF card connector Emboss Tape Features Socket Both dual-row straddle type and single-row SMT type sockets are available. Single-row SMT type has three kinds, that is, with off-set.2mm (.8"),.35mm (.14"), and.75mm (.3"). The SMT type sockets have grounding springs at the No.1 & No.26 circuits. Card frame / for type I cards For the card frame for type I cards, ultrasonic welding method is applied, which is superior in strength, heat-resistance with shorter assembly time. Adapter / for type I cards The adapter converts the CF type I card to PCMCIA type II card. The new type that has contact spring for grounding clip has been lined up, responding to CF type I card with grounding clip. In addition to the connectors applicable to CF type I cards, those for CF type II cards are also available. Specifications Pitch: 1.27mm (.5") Type: Dual-row at mating section Current rating:.5a AC, DC/line Temperature range: -2 C to +6 C (including temperature rise in applying electrical current) Contact resistance: Initial value/4m Ω max. After environmental testing/max. 2m Ω variation from initial value Insulation resistance: 1,M Ωmin. (5V DC) Withstanding voltage: 5V AC/minute (Except for Adapter cards) Mating/unmaking life: 1, cycles Circuits: 5-circuits Conforms to CFA. * Contact JST for details. Adapter / for type II cards The adapter converts the CF type I and II card to PCMCIA type II card. Shutter mechanism with lock is applied to protect pins. The new type that has contact spring for grounding clip has been lined up, responding to CF type I card with grounding clip. Header / for type I cards Available both in normal and reverse types, with stand off mm or 1.64mm (.65") each. Ejector / for type I headers The assembly of the ejector mechanism to the mounted header is a simple one-touch operation. Available in either with right button or left button. Header / for type II cards With stand off mm, both normal and reverse types are available. This header has a spring which serves as solder tab/grounding clip integrated device. Ejector / for type II headers The assembly of the ejector mechanism to the mounted header is a simple one-touch operation. The ejector for reverse type header has right button, with onepoint pushing mechanism, while the ejector for normal type header has left button, with two-point pushing mechanism. Header / Space-saving type for type II cards Available both in Normal type with stand-off 1.85mm (.73") and in reverse type with stand-off mm. The header is supplied in embossed tape packaging, for mounting by automatic placement machines. Ejector / Space-saving type for type II headers Two-point pushing mechanism has been adopted. Right button for normal type header and left button for reverse type header. *Space-saving type In comparison with header for type II with ejector, header for type II with space-saving type ejector can achieve 2% reduction in mounting space. 489

Socket Dual-row straddle type ICM-MA5S-TS13-5A 1.27(.5) No.1 mark 3.48(1.2) 33.(1.299) 35.9(1.413) 1.27(.5) 3.3(.13) 1.35 (.53) JST ICM-MA5S [8.5(.335)] 3.(.118).5(.2) 6.(.236) 1.27(.5) 3.48(1.2).5(.2) 2.7 (.16) ICM-MA5S-TS13-532 1.27(.5) 3.48(1.2) 33.(1.299) 35.9(1.413) 1.27 (.5) 3.3(.13).7 (.28) No.1 mark [8.5(.335)] 3.(.118).5 (.2) 6.(.236) 1.27(.5) 3.48(1.2).4 (.16) Rib length 2.5(.98) Tail length Circuits Solder tail Grounding spring Off-set dimension Rib length mm(in.) Tail length mm(in.) Model No. Q'ty / box Material and Finish 5 Dual-row straddle type Without With (Circuit No.1, No35) center center 3.(.118) 3.(.118) 2.5(.98) 2.5(.98) ICM-MA5S-TS13-5A ICM-MA5S-TS13-532 6 6 Contact: Copper-alloy, nickel-undercoated, Mating section...gold-plated Solder tail...tin/lead-plated Grounding spring: Phosphor bronze, nickel-undercoated, gold-plated(532) Housing: PA6T, UL94V-, black(5a) : LCP, UL94V-, black(532) 49

Socket SMT type ICM-MA5S-TS13-521 1.27(.5) 3.48(1.2) 35.9(1.413) 33.(1.299) 1.27(.5) 3.3(.13).2(.8) No.1 mark No.1 No.26 2.3925(.94) No.2.25(.1).635(.25) [8.(.315)] No.5 No.25 Rib length 4.(.157).5(.2) 6.(.236) 2. (.79).2(.8) Off-set amount Tail length 3.48(1.2) ICM-MA5S-TS13-522 1.27(.5) 35.9(1.413) 33.(1.299) 1.27(.5) 3.3(.13).75(.3) No.1 mark No.1 No.26 2.3925(.94) No.2.25(.1).635(.25) [8.(.315)] No.5 No.25 Rib length 4.(.157).5(.2) 6.(.236) 2. (.79).75(.3) Off-set amount Tail length ICM-MA5S-TS13-523 1.27(.5) 3.48(1.2) 3.3(.13) 35.9(1.413) 33.(1.299) 1.27 (.5).2(.8) No.1 mark No.1 No.26 2.3925 (.94) No.2.25(.1).635(.25) [8.(.315)] No.5 No.25 Rib length 3.(.118).5 (.2) 6.(.236) 2. (.79).2(.8) Off-set amount Tail length ICM-MA5S-TS13-524 1.27(.5) 3.48(1.2) 35.9(1.413) 33.(1.299) 1.27 (.5) 3.3(.13).35 (.14) No.1 mark No.1 No.26 2.3925 (.94) No.2.25(.1).635(.25) [8.(.315)] No.5 No.25 Rib length 4.(.157).5 (.2) 6.(.236) 2. (.79).35(.14) Off-set amount Tail length Circuits 5 Solder tail Grounding spring Off-set dimension mm(in.).2 (.8) With.75(.3) SMT type (Circuit.2 (.8) No.1, No35).35(.14) Rib length mm(in.) 4.(.157) 4.(.157) 3.(.118) 4.(.157) Note: The products listed above are supplied on embossed-tape. Tail length mm(in.) Model No. Q'ty / reel 2.(.79) 2.(.79) 2.(.79) 2.(.79) ICM-MA5S-TS13-521T ICM-MA5S-TS13-522T ICM-MA5S-TS13-523T ICM-MA5S-TS13-524T 1,5 1,5 1,5 1,5 Material and Finish Contact: Copper alloy, nickel-undercoated, Grounding spring: Phosphor bronze, nickel-undercoated, gold-plated Housing: LCP, UL94V-, black 491

Header (for Type I cards) Normal type (Stand off mm) 46.6(1.835) 34.8(1.37).635(.25).3(.12).5(.2) 43.3(1.694) 3.48(1.2) 1.27(.5) 1.27(.5) Circuit No.25.89 (.35).79(.31) Circuit No.26 4.25(.167).79(.31).89 (.35) 43.3(1.694) 4.16(1.581) Circuit No.25 1.27(.5) Circuit No.26 3.48(1.2) Circuit No.5 45.6(1.795) 7.5 (.295) 5.2 (.25) [26.5(1.43)] 19(.748) L L 5.2 (.25) 19.(.748) 7.5(.295) [26.5(1.43)] Dimension L Circuit No. Dimensions mm(in.) 4.16(1.581) 4.25(.167) 1, 13, 38,5 2 to 12, 14 to 24, 27 to 37, 39 to 49 5. ±.1(.197±.4) 4.25 ±.1(.167±.4) Circuit No.5 25, 26 3.5 ±.1(.138±.4) Reverse type (Stand off mm) 1.27 (.5) Dimension L.3(.12).635(.25).5(.2) Circuit No. Dimensions mm(in.) 34.8(1.37) 1, 13, 38,5 2 to 12, 14 to 24, 27 to 37, 39 to 49 5. ±.1(.197±.4) 4.25 ±.1(.167±.4) 25, 26 3.5 ±.1(.138±.4) Circuits Type Model No. Q'ty / box Material and Finish 5 Normal Reverse ICM-MA5H-SS52-1151 ICM-MA5H-SS52-1171 18 18 Contact: Phosphor bronze, nickel-undercoated, Housing: PPS, UL94V- Solder tab: Brass, nickel-undercoated, tin/lead-plated 492

Header (for Type I cards) Normal type (Stand off 1.64mm (.65")) 46.6(1.835) 34.8(1.37).635(.25).3(.12).5(.2) L 5.2 (.25) 19(.748) 7.5(.295) [26.5(1.43)] 43.3(1.694) 3.48(1.2) Circuit No.25 1.27(.5) 1.27 (.5).89 (.35).79(.31) Dimension L Circuit No. 1, 13, 38,5 Dimensions mm(in.) 5. ±.1(.197±.4) 3.55 (.14) 6.62 (.261) 2 to 12, 14 to 24, 27 to 37, 39 to 49 4.25 ±.1(.167±.4) Circuit No.26 Circuit No.5 25, 26 3.5 ±.1(.138±.4) Reverse type (Stand off 1.64mm (.65")).79(.31).89 (.35) 43.3(1.694) Circuit No.25 1.27(.5) 3.48(1.2) 1.27(.5) 46.6(1.835) L [26.5(1.43)] 19(.748) 6.62 (.261) 3.55 (.14) Circuit No.26 Circuit No.5 Dimension L 7.5 (.295) 5.2 (.25).3(.12).635(.25).5 (.2) Circuit No. 1, 13, 38,5 2 to 12, 14 to 24, 27 to 37, 39 to 49 Dimensions mm(in.) 5. ±.1(.197±.4) 4.25 ±.1(.167±.4) 25, 26 3.5 ±.1(.138±.4) 34.8(1.37) Circuits Type Model No. Q'ty / box Material and Finish 5 Normal Reverse ICM-MA5H-SS52-1141 ICM-MA5H-SS52-1161 14 14 Contact: Phosphor bronze, nickel-undercoated, Housing: PPS, UL94V- Solder tab: Brass, nickel-undercoated, tin/lead-plated 493

Header (for Type II cards) Normal type (Stand off mm ) 47.(1.85) 43.2(1.71).635(.25).3(.12).5(.2) 32.7(1.287) [41.6(1.638)] L 5.2 (.25) 8.9(.35).5(.2) 1.4 (.55) Circuit No.26 43.3(1.694) 3.48(1.2) 1.27(.5).89 (.35) 1.27 (.5) Circuit No.25.79(.31) Circuit No.5 3.55 (.14) 5.25(.27) Dimension L Circuit No. 1, 13, 38,5 2 to 12, 14 to 24, 27 to 37, 39 to 49 25, 26 Dimensions mm(in.) 5. ±.1(.197±.4) 4.25 ±.1(.167±.4) 3.5 ±.1(.138±.4) Normal type (Stand off 1.85mm (.73")) 47.(1.85).635(.25).3(.12).5(.2) 41.6(1.638) L.5(.2).89(.35) 1.27(.5) 1.4(.55) 3.65(.144) 1.5(.59)dia. Circuit No.26 43.3(1.694) 3.48(1.2) 1.27 (.5) 39.2(1.543) 45.(1.772) 1.(.39)dia. Circuit No.5 Circuit No.25.79 (.31) 1.85(.73) Stand off amount 3.5 (.138) Dimension L Circuit No. 1, 13, 38,5 2 to 12, 14 to 24, 27 to 37, 39 to 49 25, 26 Dimensions mm(in.) 5. ±.1(.197±.4) 4.25 ±.1(.167±.4) 3.5 ±.1(.138±.4) 494

Header (for Type II cards) Reverse type (Stand off mm) 44.2(1.74) 4.16(1.581).6(.24) 47.(1.85).635(.25).3(.12) [42.7(1.681)] Dimension L Circuit No. 1, 13, 38,5 2 to 12, 14 to 24, 27 to 37, 39 to 49 25, 26 Dimensions mm(in.) 5. ±.1(.197±.4) 4.25 ±.1(.167±.4) 3.5 ±.1(.138±.4) Circuits Type Model No. Q'ty / box Material and Finish 5 Normal (Stand off mm) Normal (Stand off 1.85mm (.73")) ICM-MA2H-SS52-N11B ICM-MA2H-SS52-N11D 84 72 Contact: Phosphor bronze, nickel-undercoated, Housing: Normal / PPS, UL94V-, black Reverse / LCP, UL94V-, black Solder tab: Phosphor bronze, copper-undercoated, tin/lead-plated Reverse (Stand off mm) ICM-MA2H-SS52-R21A 84 495

Header (for Type II cards) / Space-saving type Normal type (Stand off 1.85mm (.73")).89(.35) 43.3(1.694) 3.48(1.2).89(.35) 1.27(.5) Circuit No.25 1.27 (.5).79 (.31) 1.4(.55) 3.65(.144) Circuit No.26 Circuit No.5 1.5(.59)dia. 1.(.39)dia. 39.5(1.555) 1.85(.73) Stand off amount 3.5 (.138) Dimension L Circuit No. 1, 13, 38,5 2 to 12, 14 to 24, 27 to 37, 39 to 49 Dimensions mm(in.) 5. ±.1(.197±.4) 4.25 ±.1(.167±.4) 25, 26 3.5 ±.1(.138±.4) Reverse type (Stand off mm) 43.3(1.694).89(.35) 3.48(1.2).89(.35) 1.27(.5) Circuit No.5 1.27 (.5) Circuit No.26.79(.31) 3.6(.142) Circuit No.25 1.5(.59)dia. 1.(.39)dia. 39.5(1.555) 1.85(.73) Stand off amount 1.4 (.55) Dimension L Circuit No. 1, 13, 38,5 2 to 12, 14 to 24, 27 to 37, 39 to 49 Dimensions mm(in.) 5. ±.1(.197±.4) 4.25 ±.1(.167±.4) 25, 26 3.5 ±.1(.138±.4) Circuits Type Model No. Q'ty / reel Material and Finish Normal ICM-MA2H-SS52-N13KT 65 Contact: Phosphor bronze, nickel-undercoated,, 5 Housing: PPS, UL94V- Reverse ICM-MA2H-SS52-R13HT 75 Solder tab: Brass, copper-undercoated, tin/lead-plated Note: The products listed above are supplied on embossed-tape. 496

Ejector (for Type I Header) Right button Left button 23.6(.929) [29.5(1.161)] 4.2 (.165) 4.2 (.165) [29.5(1.161)] 23.6(.929) 25.(.984) [3.3(.13)] Button stroke Button stroke [3.3(.13)] 25.(.984) Card stroke 6.6(.26) 17.4(.685) 17.4(.685) 6.6(.26) Card stroke 2.8 (.11) 5.6(.22) 2.8 (.11) 5.6(.22) 26.5(1.43) 26.5(1.43) Type Model No. Q'ty / box Material Right button ICM-MAE-R1 1 Frame, Rotating arm, Push bar: Stainless steel Left button ICM-MAE-L1 1 Push button: PPS 497

Ejector (for Type II header) For Normal type header (Left button) For Reverse type header (Right button) 4.95(.195) [27.6(1.87)] 51.6(2.31) 1.3(.51) 23.8(.937) 27.7(1.91) 5.75(.226) Card stroke Card stroke 4.7 (.185) Button storoke 6.3 37.5(1.476) (.248) 2.6(.12) 5. (.197) 36.4(1.433) 39.6(1.559) [41.4(1.63)].5(.2) [3.35(.132)] 7. (.276) 41.7(1.642) 1.3(.51) 51.6(2.31) [27.6(1.87)] 4.95(.195) Card stroke [41.4(1.63)] 39.6(1.559) 2.6(.12) 37.5(1.476) [6. (.236)] 1.(.394) Button stroke 5. (.197) For Normal type header (Right button).5(.2) 27.7(1.66) 6.3 (.248) 5.(.197) Button stroke 4.7 (.185) Applicable header Model No. Q'ty / box Material For Normal type header (Left button) For Normal type header (Right button) For Reverse type header (Right button) ICM-MAE-L33 ICM-MAE-R32 ICM-MAE-R21 48 48 48 Frame, Rotating arm, Push bar, Extruding bar, Button shaft: Stainless steel Push button: PBT, UL94-, black(r32), gray(l33) Frame, Rotating arm, Push bar: Stainless steel Push button: PPS, UL94-, black 498

Ejector (for Type II header) / Space-saving type For Normal type header (Stand off 1.85mm (.73")) Right button 22.57(.889) 24.57(.967) 7.35(.289).75(.3) Card stroke 37.4(1.472) 4.(.157) [24.9(.98)] [4.5(.177)] [2.7(.16)] 12.5(.474) 33.(1.299) Button stroke 5. (.197) [1.43(.411)] For Reverse type header (Stand off mm) Right button 22.57(.889) 23.58(.928) [6.35(.25)] Card stroke 8.8(.346) 14.8(.583) 37.3(1.469) [2.7(.16)] [32.5(1.28)] 4.(.157) [24.9(.98)] Button stroke [4.5(.177)] 4.(.157) 3.6(.142) Type For Normal type header (Stand off 1.85mm (.73")) Right button For Reverse type header (Stand off mm) Right button Model No. ICM-MAE-R59E ICM-MAE-R66C2 Q'ty / box 36 36 Material and Finish Rotating arm, Push bar, Extruding bar, Button shaft: Stainless steel Clinched button: Synthetic resin, black Frame: Stainless steel, nickel-undercoated, selective tin/lead-plated Rotating arm, Push bar, Extruding bar, Button shaft: Stainless steel Clinched button: Synthetic resin, black Frame: Stainless steel, selective nickel-undercoated, tin/lead-plated 499

Card frame (for Type I cards) ICM-MA5F-A/B-FB Frame A 42.8(1.685) Frame B 42.8(1.685) 42.8(1.685) 42.8(1.685) 36.4(1.433) 36.4(1.433) 1.9(.75) 1.9(.75) 36.4(1.433) 36.4(1.433) 2.9(.114) 2.9(.114) ICM-MA5F-A1/B1-FB Frame A Frame B Circuits 5 Model No. as a set (Frame A + Frame B) Applicable socket Q'ty / box Material and Finish ICM-MA5F-A/B-FB ICM-MA5F-A1/B1-FB ICM-MA5S-TS13-532 ICM-MA5S-TS13-523T ICM-MA5S-TS13-521T ICM-MA5S-TS13-522T ICM-MA5S-TS13-524T 15 15 Frame: Glass-filled PBT, UL94V- Cover: Stainless steel 5

Adapter card For CF Type I cards (PC card 5V key) 68-circuits side 1.(.39) 1.(.39) 54.(2.126) 42.(1.654) 1.(.39) 1.6 (.63) 5.(.197)max. 3.3(.13) 22.(.866) 85.6(3.37) 43.3(1.75) 5-circuits side Model No. Q'ty / box Material and Finish ICM-MA5A-C441N 48 5-circuits side Header 68-circuits side Socket Contact: Copper alloy, nickel-undercoated, Housing: PPS, UL94V- Contact: Copper alloy, nickel-undercoated, Housing: LCP, UL94V- : Copper alloy, nickel-undercoated, gold-plated Cover: Stainless steel Frame: PBT, UL94V- PC board: Glass-epoxy, UL94V- For CF Type I cards 68-circuits side (PC card 3.3V key with grounding clip spring) 2.1(.83) 1.(.39) 54.(2.126) 42.(1.654) 1.(.39) 5.(.197)max. 3.3(.13) 22.(.866) 85.6(3.37) 43.3(1.75) 1.6 (.63) 5-circuits side Model No. Q'ty / box Material and Finish ICM-MA5A-CLG441N 48 5-circuits side Header 68-circuits side Socket Contact: Copper alloy, nickel-undercoated, Housing: PPS, UL94V- Contact: Copper alloy, nickel-undercoated, Housing: LCP, UL94V- Grounding spring: Copper alloy, nickel-undercoated, gold-plated Cover: Stainless steel Frame: PBT, UL94V- PC board: Glass-epoxy, UL94V- Contact spring: Copper alloy 51

Adapter card For CF Type II cards 68-circuits side (PC card 5V key with grounding clip spring) 5-circuits side Model No. Q'ty / box Material and Finish ICM-MA2A-C454N 48 5-circuits side Header 68-circuits side Socket Contact: Copper alloy, nickel-undercoated, Housing: PPS, UL94V- Contact: Copper alloy, nickel-undercoated, Housing: LCP, UL94V- Grounding spring: Copper alloy, nickel-undercoated, gold-plated Cover: Stainless steel Frame: PBT, UL94V- PC board: Glass-epoxy, UL94V- Contact spring: Copper alloy Shutter: PPS, UL94V- Spring: Stainless steel Lock: Stainless steel For CF Type II cards 68-circuits side (PC card 3.3V key with grounding clip spring) 5-circuits side Model No. Q'ty / box Material and Finish ICM-MA2A-CL454N 48 5-circuits side Header 68-circuits side Socket Contact: Copper alloy, nickel-undercoated, Housing: PPS, UL94V- Contact: Copper alloy, nickel-undercoated, Housing: LCP, UL94V- Grounding spring: Copper alloy, nickel-undercoated, gold-plated Cover: Stainless steel Frame: PBT, UL94V- PC board: Glass-epoxy, UL94V- Contact spring: Copper alloy Shutter: PPS, UL94V- Spring: Stainless steel Lock: Stainless steel 52

Taping specifications Feeding direction Carrier tape Cover tape leader area 38..± 2. (14.961±.79)dia. Feeding direction 1.55±.5 (.61±.2)dia. Feeding direction [13.(.512)]dia. 4.±.1 (.157±.4) 58. +2.5-1. +.98 -.39 (2.283 ) 2.±.5(.79±.2) 2.±.1 (.79±.4) 1.75±.1 (.69±.4) Cover tape Tail tape (Unloaded area) 4(1.575)min. Lead tape (Unloaded area) 2 vacancies min. Connector loaded area 4(15.748)min. Carrier tape Socket 26.2±.1(1.31±.4) 52.4±.1(2.63±.4) 56.±.3(2.25±.12) 12.±.1 (.472±.4) Q'ty / reel: 1,5 Normal type (Stand off 1.85mm (.73")) Carrier tape Cover tape 1.55±.5 (.61±.2)dia. Feeding direction 4.±.1 1.25±.1 (.157±.4) (.49±.4) 26.2±.1(1.31±.4) 52.4±.1(2.63±.4) 56.±.3(2.25±.12) 1.75±.1 (.69±.4) Q'ty / reel: 65 16.±.1 (.63±.4) Reverse type (Stand off mm) Carrier tape Cover tape ± ± Feeding direction ± ± ± ± 1.75±.1 (.69±.4) 26.2±.1(1.31±.4) 52.4±.1(2.63±.4) 56.±.3(2.25±.12) Q'ty / reel: 75 ±.63±.4 Note: 1. Specifications conform to JIS C 86. The tape width, connector recess dimensions, etc. are determined by the number of circuits and external shape of the connector to be loaded. Note: 2. Specifications are subject to change without prior notice. 53

PC board layout (viewed from component side) For Type I cards/stand off mm Normal type/reverse type 46±.5 (1.811±.2) 43.2±.5 (1.71±.2) 2.3(.91) 4.16±.5 (1.581±.2) 31.115±.5(1.225±.2).635±.5(.25±.2).4±.35(.16±.1) Pattern pitch Pattern width 14.5±.5 (.571±.2) 2---1.7 +.1 +.4 (.67 )dia. 5±.5 (.197±.2) 6.35±.5 (.25±.2) For Type I cards/stand off 1.64mm (.65") Normal type/reverse type 46±.5 (1.811±.2) 43.2±.5 (1.71±.2) 2.3(.91) 4.16±.5 (1.581±.2) 31.115±.5(1.225±.2).635±.5(.25±.2).4±.35(.16±.1) Pattern pitch Pattern width 14.5±.5 (.571±.2) 3. (.118) 2---1.7 +.1 +.4 (.67 )dia. 2---2.2 +.1 +.4 (.87 )dia. 5±.5 (.197±.2) 6.35±.5 (.25±.2) 54

PC board layout (viewed from component side) For Type II cards/stand off mm Normal type For Type II cards/ Stand off 1.85mm(.73") Normal type 2---2.2 +.5 +.2 (.87 - )dia. 1.6 +.5 +.2-1.8(.71) (.63 )dia. 43.2±.5(1.71±.2) 39.2±.5(1.543±.2) 31.115±.5(1.225±.2).635±.5(.25±.2).4±.35(.16±.1) (Pattern pitch) (Pattern width) 3---1.1 +.5 47.75±.5(1.88±.2) 43.17±.5(1.7±.2) +.2 (.43 - )dia. 6.±.5(.236±.2) 2.7±.5(.16±.2) 22.4±.5(.882±.2) 28.5±.5(1.122±.2) 6.3 (.248) 1.6 +.5 +.2 (.63 )dia. 22.7(.894) 1.(.394) 4.9±.5(1.61±.2) 39.2±.5(1.543±.2) 31.115±.5(1.225±.2).635±.5(.25±.2).4±.35(.16±.1) (Pattern pitch) (Pattern width) 35.(1.378) 47.75±.5(1.88±.2) 43.17±.5(1.7±.2) 1.8 (.71) 4.4±.5(.173±.2) 6.±.5(.236±.2) 2---2.2 +.5 +.2 (.87 )dia. 6.3 (.248) 22.4±.5(.882±.2) 28.5±.5(1.122±.2) 45.±.5(1.772±.2) 38.23(1.55) 45.±.5(1.772±.2) 3---1.1 +.5 +.2 (.43 )dia. 1.85mm (.73") height component mountable area For Type II cards/stand off mm Reverse type 2---2.2 +.5 +.2 (.87 - )dia. 2.3±.5 (.91±.2) 4.9±.5(1.61±.2) 4.16±.5(1.581±.2) 31.115±.5(1.225±.2).635±.5(.25±.2).4±.35(.16±.1) (Pattarn pitch) (Pattarn width) 5.5±.5(.217±.2) 6.35±.5 (.25±.2) 1.6 +.5 +.2 - (.63 )dia. 3---1.1 +.5 48.±.5(1.89±.2) 43.6±.5(1.717±.2) +.2 (.43 - )dia. 5.8±.5(.228±.2) 25.5±.5(1.4±.2) 3.±.5(1.181±.2) 44.2±.5(1.74±.2) 55

PC board layout (viewed from component side) For Type II cards/stand off 1.85mm (.73") Space-saving type Header mounting position (Components cannot be mounted inside of this area.) 1.6 +.5 +.2 (.63 )dia. Normal type 44.53±.5(1.753±.2) 39.5±.5(1.555±.2) 31.115±.5(1.225±.2).635±.5(.25±.2).4±.5(.16±.2) (Pattern pitch) (Pattern width) 1.55±.5(.61±.2) 3.85±.5(.152±.2) R.5 28.65±.5(1.128±.2) 26.6±.5(1.47±.2) 1.(.39) 1.8±.5(.71±.2).2(.8) 1.2(.47) 41.23±.5(1.623±.2) 44.38±.5(1.747±.2) 1.1 +.5 +.2 (.43 )dia. 8.15±.5 (.321±.2) 2.5 (.98) 3.±.5(.118±.2) 23.8±.5(.937±.2) 34.5±.5(1.341±.2) 2 through-holes Component height ; 1.55mm (.61") max. 2.8(.11) Component height ; 1.85mm (.73") max. 34.11±.5(1.343±.2) 43.33±.5(1.76±.2) 44.91(1.768) 2.8 (.11) Ejector mounting position (Components cannot be mounted inside of this area.) For Type II cards/stand off mm Space-saving type Reverse type 3.85±.5(.152±.2) 1.55±.5(.61±.2) 45.13±.5(1.777±.2) 39.5±.5(1.555±.2) 31.115±.5(1.225±.2).635±.5(.25±.2).4±.5(.16±.2) (Pattern pitch) (Pattern width) 3.35±.5 (.132±.2) 26.5±.5(1.43±.2) 28.55±.5(1.124±.2) 8.15±.5 (.321±.2) 3.±.5 (.118±.2) 1.9±.5 (.75±.2) 1.6 +.5 +.2 (.63 )dia. +.2 (.43 )dia. 1.8±.5(.71±.2) 44.38±.5(1.747±.2) 43.33±.5(1.76±.2) 1.1 +.5 R.5 33.95±.5(1.337±.2) [37.3(1.469)] 2 through-holes 1. (.39).2(.8) 1.2(.47) Components cannot be mounted inside of this area. 1.2±.5(.47±.2) 43.63±.5(1.718±.2) 1.2±.5(.47±.2) 56